drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c

   1 /*
   2  * Copyright © 2016-2017 Broadcom
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  *
   8  * Portions of this file (derived from panel-simple.c) are:
   9  *
  10  * Copyright (C) 2013, NVIDIA Corporation.  All rights reserved.
  11  *
  12  * Permission is hereby granted, free of charge, to any person obtaining a
  13  * copy of this software and associated documentation files (the "Software"),
  14  * to deal in the Software without restriction, including without limitation
  15  * the rights to use, copy, modify, merge, publish, distribute, sub license,
  16  * and/or sell copies of the Software, and to permit persons to whom the
  17  * Software is furnished to do so, subject to the following conditions:
  18  *
  19  * The above copyright notice and this permission notice (including the
  20  * next paragraph) shall be included in all copies or substantial portions
  21  * of the Software.
  22  *
  23  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  24  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  25  * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
  26  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  27  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  28  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  29  * DEALINGS IN THE SOFTWARE.
  30  */
  31
  32 /**
  33  * Raspberry Pi 7" touchscreen panel driver.
  34  *
  35  * The 7" touchscreen consists of a DPI LCD panel, a Toshiba
  36  * TC358762XBG DSI-DPI bridge, and an I2C-connected Atmel ATTINY88-MUR
  37  * controlling power management, the LCD PWM, and initial register
  38  * setup of the Tohsiba.
  39  *
  40  * This driver controls the TC358762 and ATTINY88, presenting a DSI
  41  * device with a drm_panel.
  42  */
  43
  44 #include <linux/delay.h>
  45 #include <linux/err.h>
  46 #include <linux/fb.h>
  47 #include <linux/gpio.h>
  48 #include <linux/gpio/consumer.h>
  49 #include <linux/i2c.h>
  50 #include <linux/module.h>
  51 #include <linux/of.h>
  52 #include <linux/of_device.h>
  53 #include <linux/of_graph.h>
  54 #include <linux/pm.h>
  55
  56 #include <drm/drm_panel.h>
  57 #include <drm/drmP.h>
  58 #include <drm/drm_crtc.h>
  59 #include <drm/drm_mipi_dsi.h>
  60 #include <drm/drm_panel.h>
  61
  62 #define RPI_DSI_DRIVER_NAME "rpi-ts-dsi"
  63
  64 /* I2C registers of the Atmel microcontroller. */
  65 enum REG_ADDR {
  66         REG_ID = 0x80,
  67         REG_PORTA, /* BIT(2) for horizontal flip, BIT(3) for vertical flip */
  68         REG_PORTB,
  69         REG_PORTC,
  70         REG_PORTD,
  71         REG_POWERON,
  72         REG_PWM,
  73         REG_DDRA,
  74         REG_DDRB,
  75         REG_DDRC,
  76         REG_DDRD,
  77         REG_TEST,
  78         REG_WR_ADDRL,
  79         REG_WR_ADDRH,
  80         REG_READH,
  81         REG_READL,
  82         REG_WRITEH,
  83         REG_WRITEL,
  84         REG_ID2,
  85 };
  86
  87 /* DSI D-PHY Layer Registers */
  88 #define D0W_DPHYCONTTX          0x0004
  89 #define CLW_DPHYCONTRX          0x0020
  90 #define D0W_DPHYCONTRX          0x0024
  91 #define D1W_DPHYCONTRX          0x0028
  92 #define COM_DPHYCONTRX          0x0038
  93 #define CLW_CNTRL               0x0040
  94 #define D0W_CNTRL               0x0044
  95 #define D1W_CNTRL               0x0048
  96 #define DFTMODE_CNTRL           0x0054
  97
  98 /* DSI PPI Layer Registers */
  99 #define PPI_STARTPPI            0x0104
 100 #define PPI_BUSYPPI             0x0108
 101 #define PPI_LINEINITCNT         0x0110
 102 #define PPI_LPTXTIMECNT         0x0114
 103 #define PPI_CLS_ATMR            0x0140
 104 #define PPI_D0S_ATMR            0x0144
 105 #define PPI_D1S_ATMR            0x0148
 106 #define PPI_D0S_CLRSIPOCOUNT    0x0164
 107 #define PPI_D1S_CLRSIPOCOUNT    0x0168
 108 #define CLS_PRE                 0x0180
 109 #define D0S_PRE                 0x0184
 110 #define D1S_PRE                 0x0188
 111 #define CLS_PREP                0x01A0
 112 #define D0S_PREP                0x01A4
 113 #define D1S_PREP                0x01A8
 114 #define CLS_ZERO                0x01C0
 115 #define D0S_ZERO                0x01C4
 116 #define D1S_ZERO                0x01C8
 117 #define PPI_CLRFLG              0x01E0
 118 #define PPI_CLRSIPO             0x01E4
 119 #define HSTIMEOUT               0x01F0
 120 #define HSTIMEOUTENABLE         0x01F4
 121
 122 /* DSI Protocol Layer Registers */
 123 #define DSI_STARTDSI            0x0204
 124 #define DSI_BUSYDSI             0x0208
 125 #define DSI_LANEENABLE          0x0210
 126 # define DSI_LANEENABLE_CLOCK           BIT(0)
 127 # define DSI_LANEENABLE_D0              BIT(1)
 128 # define DSI_LANEENABLE_D1              BIT(2)
 129
 130 #define DSI_LANESTATUS0         0x0214
 131 #define DSI_LANESTATUS1         0x0218
 132 #define DSI_INTSTATUS           0x0220
 133 #define DSI_INTMASK             0x0224
 134 #define DSI_INTCLR              0x0228
 135 #define DSI_LPTXTO              0x0230
 136 #define DSI_MODE                0x0260
 137 #define DSI_PAYLOAD0            0x0268
 138 #define DSI_PAYLOAD1            0x026C
 139 #define DSI_SHORTPKTDAT         0x0270
 140 #define DSI_SHORTPKTREQ         0x0274
 141 #define DSI_BTASTA              0x0278
 142 #define DSI_BTACLR              0x027C
 143
 144 /* DSI General Registers */
 145 #define DSIERRCNT               0x0300
 146 #define DSISIGMOD               0x0304
 147
 148 /* DSI Application Layer Registers */
 149 #define APLCTRL                 0x0400
 150 #define APLSTAT                 0x0404
 151 #define APLERR                  0x0408
 152 #define PWRMOD                  0x040C
 153 #define RDPKTLN                 0x0410
 154 #define PXLFMT                  0x0414
 155 #define MEMWRCMD                0x0418
 156
 157 /* LCDC/DPI Host Registers */
 158 #define LCDCTRL                 0x0420
 159 #define HSR                     0x0424
 160 #define HDISPR                  0x0428
 161 #define VSR                     0x042C
 162 #define VDISPR                  0x0430
 163 #define VFUEN                   0x0434
 164
 165 /* DBI-B Host Registers */
 166 #define DBIBCTRL                0x0440
 167
 168 /* SPI Master Registers */
 169 #define SPICMR                  0x0450
 170 #define SPITCR                  0x0454
 171
 172 /* System Controller Registers */
 173 #define SYSSTAT                 0x0460
 174 #define SYSCTRL                 0x0464
 175 #define SYSPLL1                 0x0468
 176 #define SYSPLL2                 0x046C
 177 #define SYSPLL3                 0x0470
 178 #define SYSPMCTRL               0x047C
 179
 180 /* GPIO Registers */
 181 #define GPIOC                   0x0480
 182 #define GPIOO                   0x0484
 183 #define GPIOI                   0x0488
 184
 185 /* I2C Registers */
 186 #define I2CCLKCTRL              0x0490
 187
 188 /* Chip/Rev Registers */
 189 #define IDREG                   0x04A0
 190
 191 /* Debug Registers */
 192 #define WCMDQUEUE               0x0500
 193 #define RCMDQUEUE               0x0504
 194
 195 struct rpi_touchscreen {
 196         struct drm_panel base;
 197         struct mipi_dsi_device *dsi;
 198         struct i2c_client *i2c;
 199 };
 200
 201 static const struct drm_display_mode rpi_touchscreen_modes[] = {
 202         {
 203                 /* Modeline comes from the Raspberry Pi firmware, with HFP=1
 204                  * plugged in and clock re-computed from that.
 205                  */
 206                 .clock = 25979400 / 1000,
 207                 .hdisplay = 800,
 208                 .hsync_start = 800 + 1,
 209                 .hsync_end = 800 + 1 + 2,
 210                 .htotal = 800 + 1 + 2 + 46,
 211                 .vdisplay = 480,
 212                 .vsync_start = 480 + 7,
 213                 .vsync_end = 480 + 7 + 2,
 214                 .vtotal = 480 + 7 + 2 + 21,
 215                 .vrefresh = 60,
 216         },
 217 };
 218
 219 static struct rpi_touchscreen *panel_to_ts(struct drm_panel *panel)
 220 {
 221         return container_of(panel, struct rpi_touchscreen, base);
 222 }
 223
 224 static int rpi_touchscreen_i2c_read(struct rpi_touchscreen *ts, u8 reg)
 225 {
 226         return i2c_smbus_read_byte_data(ts->i2c, reg);
 227 }
 228
 229 static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts,
 230                                       u8 reg, u8 val)
 231 {
 232         int ret;
 233
 234         ret = i2c_smbus_write_byte_data(ts->i2c, reg, val);
 235         if (ret)
 236                 dev_err(&ts->dsi->dev, "I2C write failed: %d\n", ret);
 237 }
 238
 239 static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val)
 240 {
 241         u8 msg[] = {
 242                 reg,
 243                 reg >> 8,
 244                 val,
 245                 val >> 8,
 246                 val >> 16,
 247                 val >> 24,
 248         };
 249
 250         mipi_dsi_generic_write(ts->dsi, msg, sizeof(msg));
 251
 252         return 0;
 253 }
 254
 255 static int rpi_touchscreen_disable(struct drm_panel *panel)
 256 {
 257         struct rpi_touchscreen *ts = panel_to_ts(panel);
 258
 259         rpi_touchscreen_i2c_write(ts, REG_PWM, 0);
 260
 261         rpi_touchscreen_i2c_write(ts, REG_POWERON, 0);
 262         udelay(1);
 263
 264         return 0;
 265 }
 266
 267 static int rpi_touchscreen_noop(struct drm_panel *panel)
 268 {
 269         return 0;
 270 }
 271
 272 static int rpi_touchscreen_enable(struct drm_panel *panel)
 273 {
 274         struct rpi_touchscreen *ts = panel_to_ts(panel);
 275         int i;
 276
 277         rpi_touchscreen_i2c_write(ts, REG_POWERON, 1);
 278         /* Wait for nPWRDWN to go low to indicate poweron is done. */
 279         for (i = 0; i < 100; i++) {
 280                 if (rpi_touchscreen_i2c_read(ts, REG_PORTB) & 1)
 281                         break;
 282         }
 283
 284         rpi_touchscreen_write(ts, DSI_LANEENABLE,
 285                               DSI_LANEENABLE_CLOCK |
 286                               DSI_LANEENABLE_D0);
 287         rpi_touchscreen_write(ts, PPI_D0S_CLRSIPOCOUNT, 0x05);
 288         rpi_touchscreen_write(ts, PPI_D1S_CLRSIPOCOUNT, 0x05);
 289         rpi_touchscreen_write(ts, PPI_D0S_ATMR, 0x00);
 290         rpi_touchscreen_write(ts, PPI_D1S_ATMR, 0x00);
 291         rpi_touchscreen_write(ts, PPI_LPTXTIMECNT, 0x03);
 292
 293         rpi_touchscreen_write(ts, SPICMR, 0x00);
 294         rpi_touchscreen_write(ts, LCDCTRL, 0x00100150);
 295         rpi_touchscreen_write(ts, SYSCTRL, 0x040f);
 296         msleep(100);
 297
 298         rpi_touchscreen_write(ts, PPI_STARTPPI, 0x01);
 299         rpi_touchscreen_write(ts, DSI_STARTDSI, 0x01);
 300         msleep(100);
 301
 302         /* Turn on the backlight. */
 303         rpi_touchscreen_i2c_write(ts, REG_PWM, 255);
 304
 305         /* Default to the same orientation as the closed source
 306          * firmware used for the panel.  Runtime rotation
 307          * configuration will be supported using VC4's plane
 308          * orientation bits.
 309          */
 310         rpi_touchscreen_i2c_write(ts, REG_PORTA, BIT(2));
 311
 312         return 0;
 313 }
 314
 315 static int rpi_touchscreen_get_modes(struct drm_panel *panel)
 316 {
 317         struct drm_connector *connector = panel->connector;
 318         struct drm_device *drm = panel->drm;
 319         unsigned int i, num = 0;
 320         static const u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
 321
 322         for (i = 0; i < ARRAY_SIZE(rpi_touchscreen_modes); i++) {
 323                 const struct drm_display_mode *m = &rpi_touchscreen_modes[i];
 324                 struct drm_display_mode *mode;
 325
 326                 mode = drm_mode_duplicate(drm, m);
 327                 if (!mode) {
 328                         dev_err(drm->dev, "failed to add mode %ux%u@%u\n",
 329                                 m->hdisplay, m->vdisplay, m->vrefresh);
 330                         continue;
 331                 }
 332
 333                 mode->type |= DRM_MODE_TYPE_DRIVER;
 334
 335                 if (i == 0)
 336                         mode->type |= DRM_MODE_TYPE_PREFERRED;
 337
 338                 drm_mode_set_name(mode);
 339
 340                 drm_mode_probed_add(connector, mode);
 341                 num++;
 342         }
 343
 344         connector->display_info.bpc = 8;
 345         connector->display_info.width_mm = 154;
 346         connector->display_info.height_mm = 86;
 347         drm_display_info_set_bus_formats(&connector->display_info,
 348                                          &bus_format, 1);
 349
 350         return num;
 351 }
 352
 353 static const struct drm_panel_funcs rpi_touchscreen_funcs = {
 354         .disable = rpi_touchscreen_disable,
 355         .unprepare = rpi_touchscreen_noop,
 356         .prepare = rpi_touchscreen_noop,
 357         .enable = rpi_touchscreen_enable,
 358         .get_modes = rpi_touchscreen_get_modes,
 359 };
 360
 361 static int rpi_touchscreen_probe(struct i2c_client *i2c,
 362                                  const struct i2c_device_id *id)
 363 {
 364         struct device *dev = &i2c->dev;
 365         struct rpi_touchscreen *ts;
 366         struct device_node *endpoint, *dsi_host_node;
 367         struct mipi_dsi_host *host;
 368         int ret, ver;
 369         struct mipi_dsi_device_info info = {
 370                 .type = RPI_DSI_DRIVER_NAME,
 371                 .channel = 0,
 372                 .node = NULL,
 373         };
 374
 375         ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
 376         if (!ts)
 377                 return -ENOMEM;
 378
 379         i2c_set_clientdata(i2c, ts);
 380
 381         ts->i2c = i2c;
 382
 383         ver = rpi_touchscreen_i2c_read(ts, REG_ID);
 384         if (ver < 0) {
 385                 dev_err(dev, "Atmel I2C read failed: %d\n", ver);
 386                 return -ENODEV;
 387         }
 388
 389         switch (ver) {
 390         case 0xde: /* ver 1 */
 391         case 0xc3: /* ver 2 */
 392                 break;
 393         default:
 394                 dev_err(dev, "Unknown Atmel firmware revision: 0x%02x\n", ver);
 395                 return -ENODEV;
 396         }
 397
 398         /* Turn off at boot, so we can cleanly sequence powering on. */
 399         rpi_touchscreen_i2c_write(ts, REG_POWERON, 0);
 400
 401         /* Look up the DSI host.  It needs to probe before we do. */
 402         endpoint = of_graph_get_next_endpoint(dev->of_node, NULL);
 403         if (!endpoint)
 404                 return -ENODEV;
 405
 406         dsi_host_node = of_graph_get_remote_port_parent(endpoint);
 407         if (!dsi_host_node)
 408                 goto error;
 409
 410         host = of_find_mipi_dsi_host_by_node(dsi_host_node);
 411         of_node_put(dsi_host_node);
 412         if (!host) {
 413                 of_node_put(endpoint);
 414                 return -EPROBE_DEFER;
 415         }
 416
 417         info.node = of_graph_get_remote_port(endpoint);
 418         if (!info.node)
 419                 goto error;
 420
 421         of_node_put(endpoint);
 422
 423         ts->dsi = mipi_dsi_device_register_full(host, &info);
 424         if (IS_ERR(ts->dsi)) {
 425                 dev_err(dev, "DSI device registration failed: %ld\n",
 426                         PTR_ERR(ts->dsi));
 427                 return PTR_ERR(ts->dsi);
 428         }
 429
 430         drm_panel_init(&ts->base);
 431         ts->base.dev = dev;
 432         ts->base.funcs = &rpi_touchscreen_funcs;
 433
 434         /* This appears last, as it's what will unblock the DSI host
 435          * driver's component bind function.
 436          */
 437         ret = drm_panel_add(&ts->base);
 438         if (ret)
 439                 return ret;
 440
 441         return 0;
 442
 443 error:
 444         of_node_put(endpoint);
 445         return -ENODEV;
 446 }
 447
 448 static int rpi_touchscreen_remove(struct i2c_client *i2c)
 449 {
 450         struct rpi_touchscreen *ts = i2c_get_clientdata(i2c);
 451
 452         mipi_dsi_detach(ts->dsi);
 453
 454         drm_panel_remove(&ts->base);
 455
 456         mipi_dsi_device_unregister(ts->dsi);
 457
 458         return 0;
 459 }
 460
 461 static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi)
 462 {
 463         int ret;
 464
 465         dsi->mode_flags = (MIPI_DSI_MODE_VIDEO |
 466                            MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
 467                            MIPI_DSI_MODE_LPM);
 468         dsi->format = MIPI_DSI_FMT_RGB888;
 469         dsi->lanes = 1;
 470
 471         ret = mipi_dsi_attach(dsi);
 472
 473         if (ret)
 474                 dev_err(&dsi->dev, "failed to attach dsi to host: %d\n", ret);
 475
 476         return ret;
 477 }
 478
 479 static struct mipi_dsi_driver rpi_touchscreen_dsi_driver = {
 480         .driver.name = RPI_DSI_DRIVER_NAME,
 481         .probe = rpi_touchscreen_dsi_probe,
 482 };
 483
 484 static const struct of_device_id rpi_touchscreen_of_ids[] = {
 485         { .compatible = "raspberrypi,7inch-touchscreen-panel" },
 486         { } /* sentinel */
 487 };
 488 MODULE_DEVICE_TABLE(of, rpi_touchscreen_of_ids);
 489
 490 static struct i2c_driver rpi_touchscreen_driver = {
 491         .driver = {
 492                 .name = "rpi_touchscreen",
 493                 .of_match_table = rpi_touchscreen_of_ids,
 494         },
 495         .probe = rpi_touchscreen_probe,
 496         .remove = rpi_touchscreen_remove,
 497 };
 498
 499 static int __init rpi_touchscreen_init(void)
 500 {
 501         mipi_dsi_driver_register(&rpi_touchscreen_dsi_driver);
 502         return i2c_add_driver(&rpi_touchscreen_driver);
 503 }
 504 module_init(rpi_touchscreen_init);
 505
 506 static void __exit rpi_touchscreen_exit(void)
 507 {
 508         i2c_del_driver(&rpi_touchscreen_driver);
 509         mipi_dsi_driver_unregister(&rpi_touchscreen_dsi_driver);
 510 }
 511 module_exit(rpi_touchscreen_exit);
 512
 513 MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
 514 MODULE_DESCRIPTION("Raspberry Pi 7-inch touchscreen driver");
 515 MODULE_LICENSE("GPL v2");