1 # SPDX-License-Identifier: GPL-2.0-only
6 Panel registration and lookup framework.
9 depends on DRM && DRM_PANEL
11 config DRM_PANEL_ABT_Y030XX067A
12 tristate "ABT Y030XX067A 320x480 LCD panel"
16 Say Y here to enable support for the Asia Better Technology Ltd.
17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18 and RG-99 handheld gaming consoles.
20 config DRM_PANEL_ARM_VERSATILE
21 tristate "ARM Versatile panel driver"
24 select VIDEOMODE_HELPERS
26 This driver supports the ARM Versatile panels connected to ARM
27 reference designs. The panel is detected using special registers
28 in the Versatile family syscon registers.
30 config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31 tristate "ASUS Z00T TM5P5 NT35596 panel"
32 depends on GPIOLIB && OF
33 depends on DRM_MIPI_DSI
34 depends on BACKLIGHT_CLASS_DEVICE
36 Say Y here if you want to enable support for the ASUS TMP5P5
37 NT35596 1080x1920 video mode panel as found in some Asus
38 Zenfone 2 Laser Z00T devices.
40 config DRM_PANEL_BOE_BF060Y8M_AJ0
41 tristate "Boe BF060Y8M-AJ0 panel"
43 depends on DRM_MIPI_DSI
44 depends on BACKLIGHT_CLASS_DEVICE
46 Say Y here if you want to enable support for Boe BF060Y8M-AJ0
47 5.99" AMOLED modules. The panel has a 1080x2160 resolution and
48 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
49 the host and backlight is controlled through DSI commands.
51 config DRM_PANEL_BOE_HIMAX8279D
52 tristate "Boe Himax8279d panel"
54 depends on DRM_MIPI_DSI
55 depends on BACKLIGHT_CLASS_DEVICE
57 Say Y here if you want to enable support for Boe Himax8279d
58 TFT-LCD modules. The panel has a 1200x1920 resolution and uses
59 24 bit RGB per pixel. It provides a MIPI DSI interface to
60 the host and has a built-in LED backlight.
62 config DRM_PANEL_BOE_TV101WUM_NL6
63 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
65 depends on DRM_MIPI_DSI
66 depends on BACKLIGHT_CLASS_DEVICE
68 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
69 45NA WUXGA PANEL DSI Video Mode panel
71 config DRM_PANEL_DSI_CM
72 tristate "Generic DSI command mode panels"
74 depends on DRM_MIPI_DSI
75 depends on BACKLIGHT_CLASS_DEVICE
77 DRM panel driver for DSI command mode panels with support for
78 embedded and external backlights.
81 tristate "Generic LVDS panel driver"
83 depends on BACKLIGHT_CLASS_DEVICE
84 select VIDEOMODE_HELPERS
86 This driver supports LVDS panels that don't require device-specific
87 handling of power supplies or control signals. It implements automatic
88 backlight handling if the panel is attached to a backlight controller.
90 config DRM_PANEL_SIMPLE
91 tristate "support for simple panels (other than eDP ones)"
93 depends on BACKLIGHT_CLASS_DEVICE
95 select VIDEOMODE_HELPERS
97 DRM panel driver for dumb non-eDP panels that need at most a regulator
98 and a GPIO to be powered up. Optionally a backlight can be attached so
99 that it can be automatically turned off when the panel goes into a
103 tristate "support for simple Embedded DisplayPort panels"
105 depends on BACKLIGHT_CLASS_DEVICE
107 select VIDEOMODE_HELPERS
108 select DRM_DISPLAY_DP_HELPER
109 select DRM_DISPLAY_HELPER
110 select DRM_DP_AUX_BUS
111 select DRM_KMS_HELPER
113 DRM panel driver for dumb eDP panels that need at most a regulator and
114 a GPIO to be powered up. Optionally a backlight can be attached so
115 that it can be automatically turned off when the panel goes into a
118 config DRM_PANEL_ELIDA_KD35T133
119 tristate "Elida KD35T133 panel driver"
121 depends on DRM_MIPI_DSI
122 depends on BACKLIGHT_CLASS_DEVICE
124 Say Y here if you want to enable support for the Elida
125 KD35T133 controller for 320x480 LCD panels with MIPI-DSI
128 config DRM_PANEL_FEIXIN_K101_IM2BA02
129 tristate "Feixin K101 IM2BA02 panel"
131 depends on DRM_MIPI_DSI
132 depends on BACKLIGHT_CLASS_DEVICE
134 Say Y here if you want to enable support for the Feixin K101 IM2BA02
135 4-lane 800x1280 MIPI DSI panel.
137 config DRM_PANEL_FEIYANG_FY07024DI26A30D
138 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
140 depends on DRM_MIPI_DSI
141 depends on BACKLIGHT_CLASS_DEVICE
143 Say Y if you want to enable support for panels based on the
144 Feiyang FY07024DI26A30-D MIPI-DSI interface.
146 config DRM_PANEL_ILITEK_IL9322
147 tristate "Ilitek ILI9322 320x240 QVGA panels"
151 Say Y here if you want to enable support for Ilitek IL9322
152 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
154 config DRM_PANEL_ILITEK_ILI9341
155 tristate "Ilitek ILI9341 240x320 QVGA panels"
157 depends on DRM_KMS_HELPER
158 depends on DRM_GEM_CMA_HELPER
159 depends on BACKLIGHT_CLASS_DEVICE
162 Say Y here if you want to enable support for Ilitek IL9341
163 QVGA (240x320) RGB panels. support serial & parallel rgb
166 config DRM_PANEL_ILITEK_ILI9881C
167 tristate "Ilitek ILI9881C-based panels"
169 depends on DRM_MIPI_DSI
170 depends on BACKLIGHT_CLASS_DEVICE
172 Say Y if you want to enable support for panels based on the
173 Ilitek ILI9881c controller.
175 config DRM_PANEL_INNOLUX_EJ030NA
176 tristate "Innolux EJ030NA 320x480 LCD panel"
180 Say Y here to enable support for the Innolux/Chimei EJ030NA
181 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
182 and LDK handheld gaming consoles.
184 config DRM_PANEL_INNOLUX_P079ZCA
185 tristate "Innolux P079ZCA panel"
187 depends on DRM_MIPI_DSI
188 depends on BACKLIGHT_CLASS_DEVICE
190 Say Y here if you want to enable support for Innolux P079ZCA
191 TFT-LCD modules. The panel has a 1024x768 resolution and uses
192 24 bit RGB per pixel. It provides a MIPI DSI interface to
193 the host and has a built-in LED backlight.
195 config DRM_PANEL_JDI_LT070ME05000
196 tristate "JDI LT070ME05000 WUXGA DSI panel"
198 depends on DRM_MIPI_DSI
199 depends on BACKLIGHT_CLASS_DEVICE
201 Say Y here if you want to enable support for JDI DSI video mode
202 panel as found in Google Nexus 7 (2013) devices.
203 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
206 config DRM_PANEL_JDI_R63452
207 tristate "JDI R63452 Full HD DSI panel"
209 depends on DRM_MIPI_DSI
210 depends on BACKLIGHT_CLASS_DEVICE
212 Say Y here if you want to enable support for the JDI R63452
213 DSI command mode panel as found in Xiaomi Mi 5 Devices.
215 config DRM_PANEL_KHADAS_TS050
216 tristate "Khadas TS050 panel"
218 depends on DRM_MIPI_DSI
219 depends on BACKLIGHT_CLASS_DEVICE
221 Say Y here if you want to enable support for Khadas TS050 TFT-LCD
222 panel module. The panel has a 1080x1920 resolution and uses
223 24 bit RGB per pixel. It provides a MIPI DSI interface to
224 the host, a built-in LED backlight and touch controller.
226 config DRM_PANEL_KINGDISPLAY_KD097D04
227 tristate "Kingdisplay kd097d04 panel"
229 depends on DRM_MIPI_DSI
230 depends on BACKLIGHT_CLASS_DEVICE
232 Say Y here if you want to enable support for Kingdisplay kd097d04
233 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
234 24 bit RGB per pixel. It provides a MIPI DSI interface to
235 the host and has a built-in LED backlight.
237 config DRM_PANEL_LEADTEK_LTK050H3146W
238 tristate "Leadtek LTK050H3146W panel"
240 depends on DRM_MIPI_DSI
241 depends on BACKLIGHT_CLASS_DEVICE
243 Say Y here if you want to enable support for Leadtek LTK050H3146W
244 TFT-LCD modules. The panel has a 720x1280 resolution and uses
245 24 bit RGB per pixel. It provides a MIPI DSI interface to
246 the host and has a built-in LED backlight.
248 config DRM_PANEL_LEADTEK_LTK500HD1829
249 tristate "Leadtek LTK500HD1829 panel"
251 depends on DRM_MIPI_DSI
252 depends on BACKLIGHT_CLASS_DEVICE
254 Say Y here if you want to enable support for Kingdisplay kd097d04
255 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
256 24 bit RGB per pixel. It provides a MIPI DSI interface to
257 the host and has a built-in LED backlight.
259 config DRM_PANEL_SAMSUNG_LD9040
260 tristate "Samsung LD9040 RGB/SPI panel"
262 select VIDEOMODE_HELPERS
264 config DRM_PANEL_LG_LB035Q02
265 tristate "LG LB035Q024573 RGB panel"
266 depends on GPIOLIB && OF && SPI
268 Say Y here if you want to enable support for the LB035Q02 RGB panel
269 (found on the Gumstix Overo Palo35 board). To compile this driver as
270 a module, choose M here.
272 config DRM_PANEL_LG_LG4573
273 tristate "LG4573 RGB/SPI panel"
275 select VIDEOMODE_HELPERS
277 Say Y here if you want to enable support for LG4573 RGB panel.
278 To compile this driver as a module, choose M here.
280 config DRM_PANEL_NEC_NL8048HL11
281 tristate "NEC NL8048HL11 RGB panel"
282 depends on GPIOLIB && OF && SPI
284 Say Y here if you want to enable support for the NEC NL8048HL11 RGB
285 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
286 as a module, choose M here.
288 config DRM_PANEL_NEWVISION_NV3052C
289 tristate "NewVision NV3052C RGB/SPI panel"
291 depends on BACKLIGHT_CLASS_DEVICE
294 Say Y here if you want to enable support for the panels built
295 around the NewVision NV3052C display controller.
297 config DRM_PANEL_NOVATEK_NT35510
298 tristate "Novatek NT35510 RGB panel driver"
300 depends on DRM_MIPI_DSI
301 depends on BACKLIGHT_CLASS_DEVICE
303 Say Y here if you want to enable support for the panels built
304 around the Novatek NT35510 display controller, such as some
307 config DRM_PANEL_NOVATEK_NT35560
308 tristate "Novatek NT35560 DSI command mode panel"
310 depends on DRM_MIPI_DSI
311 depends on BACKLIGHT_CLASS_DEVICE
312 select VIDEOMODE_HELPERS
314 Say Y here if you want to enable the Novatek NT35560 display
315 controller. This panel supports DSI in both command and video
316 mode. This supports several panels such as Sony ACX424AKM and
319 config DRM_PANEL_NOVATEK_NT35950
320 tristate "Novatek NT35950 DSI panel"
322 depends on DRM_MIPI_DSI
323 depends on BACKLIGHT_CLASS_DEVICE
325 Say Y here if you want to enable support for the panels built
326 around the Novatek NT35950 display controller, such as some
327 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
330 config DRM_PANEL_NOVATEK_NT36672A
331 tristate "Novatek NT36672A DSI panel"
333 depends on DRM_MIPI_DSI
334 depends on BACKLIGHT_CLASS_DEVICE
336 Say Y here if you want to enable support for the panels built
337 around the Novatek NT36672A display controller, such as some
338 Tianma panels used in a few Xiaomi Poco F1 mobile phones.
340 config DRM_PANEL_NOVATEK_NT39016
341 tristate "Novatek NT39016 RGB/SPI panel"
343 depends on BACKLIGHT_CLASS_DEVICE
346 Say Y here if you want to enable support for the panels built
347 around the Novatek NT39016 display controller.
349 config DRM_PANEL_MANTIX_MLAF057WE51
350 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
352 depends on DRM_MIPI_DSI
353 depends on BACKLIGHT_CLASS_DEVICE
355 Say Y here if you want to enable support for the Mantix
356 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
357 has a resolution of 720x1440 pixels, a built in backlight and touch
360 config DRM_PANEL_OLIMEX_LCD_OLINUXINO
361 tristate "Olimex LCD-OLinuXino panel"
364 depends on BACKLIGHT_CLASS_DEVICE
367 The panel is used with different sizes LCDs, from 480x272 to
368 1280x800, and 24 bit per pixel.
370 Say Y here if you want to enable support for Olimex Ltd.
373 config DRM_PANEL_ORISETECH_OTM8009A
374 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
376 depends on DRM_MIPI_DSI
377 depends on BACKLIGHT_CLASS_DEVICE
379 Say Y here if you want to enable support for Orise Technology
380 otm8009a 480x800 dsi 2dl panel.
382 config DRM_PANEL_OSD_OSD101T2587_53TS
383 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
385 depends on DRM_MIPI_DSI
386 depends on BACKLIGHT_CLASS_DEVICE
388 Say Y here if you want to enable support for One Stop Displays
389 OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
391 config DRM_PANEL_PANASONIC_VVX10F034N00
392 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
394 depends on DRM_MIPI_DSI
395 depends on BACKLIGHT_CLASS_DEVICE
397 Say Y here if you want to enable support for Panasonic VVX10F034N00
398 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
401 config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
402 tristate "Raspberry Pi 7-inch touchscreen panel"
403 depends on DRM_MIPI_DSI
405 Say Y here if you want to enable support for the Raspberry
406 Pi 7" Touchscreen. To compile this driver as a module,
409 config DRM_PANEL_RAYDIUM_RM67191
410 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
412 depends on DRM_MIPI_DSI
413 depends on BACKLIGHT_CLASS_DEVICE
415 Say Y here if you want to enable support for Raydium RM67191 FHD
416 (1080x1920) DSI panel.
418 config DRM_PANEL_RAYDIUM_RM68200
419 tristate "Raydium RM68200 720x1280 DSI video mode panel"
421 depends on DRM_MIPI_DSI
422 depends on BACKLIGHT_CLASS_DEVICE
424 Say Y here if you want to enable support for Raydium RM68200
425 720x1280 DSI video mode panel.
427 config DRM_PANEL_RONBO_RB070D30
428 tristate "Ronbo Electronics RB070D30 panel"
430 depends on DRM_MIPI_DSI
431 depends on BACKLIGHT_CLASS_DEVICE
433 Say Y here if you want to enable support for Ronbo Electronics
434 RB070D30 1024x600 DSI panel.
436 config DRM_PANEL_SAMSUNG_ATNA33XC20
437 tristate "Samsung ATNA33XC20 eDP panel"
439 depends on BACKLIGHT_CLASS_DEVICE
441 select DRM_DP_AUX_BUS
443 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
444 be handled by the DRM_PANEL_SIMPLE driver because its power
445 sequencing is non-standard.
447 config DRM_PANEL_SAMSUNG_DB7430
448 tristate "Samsung DB7430-based DPI panels"
449 depends on OF && SPI && GPIOLIB
450 depends on BACKLIGHT_CLASS_DEVICE
453 Say Y here if you want to enable support for the Samsung
454 DB7430 DPI display controller used in such devices as the
455 LMS397KF04 480x800 DPI panel.
457 config DRM_PANEL_SAMSUNG_S6D16D0
458 tristate "Samsung S6D16D0 DSI video mode panel"
460 depends on DRM_MIPI_DSI
461 select VIDEOMODE_HELPERS
463 config DRM_PANEL_SAMSUNG_S6D27A1
464 tristate "Samsung S6D27A1 DPI panel driver"
465 depends on OF && SPI && GPIOLIB
468 Say Y here if you want to enable support for the Samsung
469 S6D27A1 DPI 480x800 panel.
471 This panel can be found in Samsung Galaxy Ace 2
472 GT-I8160 mobile phone.
474 config DRM_PANEL_SAMSUNG_S6E3HA2
475 tristate "Samsung S6E3HA2 DSI video mode panel"
477 depends on DRM_MIPI_DSI
478 depends on BACKLIGHT_CLASS_DEVICE
479 select VIDEOMODE_HELPERS
481 config DRM_PANEL_SAMSUNG_S6E63J0X03
482 tristate "Samsung S6E63J0X03 DSI command mode panel"
484 depends on DRM_MIPI_DSI
485 depends on BACKLIGHT_CLASS_DEVICE
486 select VIDEOMODE_HELPERS
488 config DRM_PANEL_SAMSUNG_S6E63M0
489 tristate "Samsung S6E63M0 RGB panel"
491 depends on BACKLIGHT_CLASS_DEVICE
493 Say Y here if you want to enable support for Samsung S6E63M0
494 AMOLED LCD panel. This panel can be accessed using SPI or
497 config DRM_PANEL_SAMSUNG_S6E63M0_SPI
498 tristate "Samsung S6E63M0 RGB SPI interface"
500 depends on DRM_PANEL_SAMSUNG_S6E63M0
501 default DRM_PANEL_SAMSUNG_S6E63M0
504 Say Y here if you want to be able to access the Samsung
505 S6E63M0 panel using SPI.
507 config DRM_PANEL_SAMSUNG_S6E63M0_DSI
508 tristate "Samsung S6E63M0 RGB DSI interface"
509 depends on DRM_MIPI_DSI
510 depends on DRM_PANEL_SAMSUNG_S6E63M0
512 Say Y here if you want to be able to access the Samsung
513 S6E63M0 panel using DSI.
515 config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
516 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
519 select VIDEOMODE_HELPERS
521 config DRM_PANEL_SAMSUNG_S6E8AA0
522 tristate "Samsung S6E8AA0 DSI video mode panel"
525 select VIDEOMODE_HELPERS
527 config DRM_PANEL_SAMSUNG_SOFEF00
528 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
530 depends on DRM_MIPI_DSI
531 depends on BACKLIGHT_CLASS_DEVICE
532 select VIDEOMODE_HELPERS
534 Say Y or M here if you want to enable support for the Samsung AMOLED
535 command mode panels found in the OnePlus 6/6T smartphones.
537 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
539 config DRM_PANEL_SEIKO_43WVF1G
540 tristate "Seiko 43WVF1G panel"
542 depends on BACKLIGHT_CLASS_DEVICE
543 select VIDEOMODE_HELPERS
545 Say Y here if you want to enable support for the Seiko
546 43WVF1G controller for 800x480 LCD panels
548 config DRM_PANEL_SHARP_LQ101R1SX01
549 tristate "Sharp LQ101R1SX01 panel"
551 depends on DRM_MIPI_DSI
552 depends on BACKLIGHT_CLASS_DEVICE
554 Say Y here if you want to enable support for Sharp LQ101R1SX01
555 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
556 24 bit RGB per pixel. It provides a dual MIPI DSI interface to
557 the host and has a built-in LED backlight.
559 To compile this driver as a module, choose M here: the module
560 will be called panel-sharp-lq101r1sx01.
562 config DRM_PANEL_SHARP_LS037V7DW01
563 tristate "Sharp LS037V7DW01 VGA LCD panel"
564 depends on GPIOLIB && OF && REGULATOR
566 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
567 (480x640) LCD panel (found on the TI SDP3430 board).
569 config DRM_PANEL_SHARP_LS043T1LE01
570 tristate "Sharp LS043T1LE01 qHD video mode panel"
572 depends on DRM_MIPI_DSI
573 depends on BACKLIGHT_CLASS_DEVICE
575 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
576 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
578 config DRM_PANEL_SHARP_LS060T1SX01
579 tristate "Sharp LS060T1SX01 FullHD video mode panel"
581 depends on DRM_MIPI_DSI
582 depends on BACKLIGHT_CLASS_DEVICE
584 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
585 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
588 config DRM_PANEL_SITRONIX_ST7701
589 tristate "Sitronix ST7701 panel driver"
591 depends on DRM_MIPI_DSI
592 depends on BACKLIGHT_CLASS_DEVICE
594 Say Y here if you want to enable support for the Sitronix
595 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
598 config DRM_PANEL_SITRONIX_ST7703
599 tristate "Sitronix ST7703 based MIPI touchscreen panels"
601 depends on DRM_MIPI_DSI
602 depends on BACKLIGHT_CLASS_DEVICE
604 Say Y here if you want to enable support for Sitronix ST7703 based
605 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
606 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
607 in backlight and touch controller.
608 Touch input support is provided by the goodix driver and needs to be
611 config DRM_PANEL_SITRONIX_ST7789V
612 tristate "Sitronix ST7789V panel"
614 depends on BACKLIGHT_CLASS_DEVICE
616 Say Y here if you want to enable support for the Sitronix
617 ST7789V controller for 240x320 LCD panels
619 config DRM_PANEL_SONY_ACX565AKM
620 tristate "Sony ACX565AKM panel"
621 depends on GPIOLIB && OF && SPI
622 depends on BACKLIGHT_CLASS_DEVICE
624 Say Y here if you want to enable support for the Sony ACX565AKM
625 800x600 3.5" panel (found on the Nokia N900).
627 config DRM_PANEL_SONY_TULIP_TRULY_NT35521
628 tristate "Sony Tulip Truly NT35521 panel"
629 depends on GPIOLIB && OF
630 depends on DRM_MIPI_DSI
631 depends on BACKLIGHT_CLASS_DEVICE
633 Say Y here if you want to enable support for the Sony Tulip
634 NT35521 1280x720 video mode panel as found on Sony Xperia M4
637 config DRM_PANEL_TDO_TL070WSH30
638 tristate "TDO TL070WSH30 DSI panel"
640 depends on DRM_MIPI_DSI
641 depends on BACKLIGHT_CLASS_DEVICE
643 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
644 panel module. The panel has a 1024×600 resolution and uses
645 24 bit RGB per pixel. It provides a MIPI DSI interface to
646 the host, a built-in LED backlight and touch controller.
648 config DRM_PANEL_TPO_TD028TTEC1
649 tristate "Toppoly (TPO) TD028TTEC1 panel driver"
651 depends on BACKLIGHT_CLASS_DEVICE
653 Say Y here if you want to enable support for TPO TD028TTEC1 480x640
654 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
656 config DRM_PANEL_TPO_TD043MTEA1
657 tristate "Toppoly (TPO) TD043MTEA1 panel driver"
658 depends on GPIOLIB && OF && REGULATOR && SPI
660 Say Y here if you want to enable support for TPO TD043MTEA1 800x480
661 4.3" panel (found on the OMAP3 Pandora board).
663 config DRM_PANEL_TPO_TPG110
664 tristate "TPO TPG 800x400 panel"
665 depends on OF && SPI && GPIOLIB
666 depends on BACKLIGHT_CLASS_DEVICE
668 Say Y here if you want to enable support for TPO TPG110
669 400CH LTPS TFT LCD Single Chip Digital Driver for up to
672 config DRM_PANEL_TRULY_NT35597_WQXGA
673 tristate "Truly WQXGA"
675 depends on DRM_MIPI_DSI
677 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
680 config DRM_PANEL_VISIONOX_RM69299
681 tristate "Visionox RM69299"
683 depends on DRM_MIPI_DSI
685 Say Y here if you want to enable support for Visionox
686 RM69299 DSI Video Mode panel.
688 config DRM_PANEL_WIDECHIPS_WS2401
689 tristate "Widechips WS2401 DPI panel driver"
690 depends on SPI && GPIOLIB
691 depends on BACKLIGHT_CLASS_DEVICE
694 Say Y here if you want to enable support for the Widechips WS2401 DPI
695 480x800 display controller used in panels such as Samsung LMS380KF01.
696 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
698 config DRM_PANEL_XINPENG_XPP055C272
699 tristate "Xinpeng XPP055C272 panel driver"
701 depends on DRM_MIPI_DSI
702 depends on BACKLIGHT_CLASS_DEVICE
704 Say Y here if you want to enable support for the Xinpeng
705 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI