drivers/gpu/drm/omapdrm/displays/panel-dpi.c

   1 /*
   2  * Generic MIPI DPI Panel Driver
   3  *
   4  * Copyright (C) 2013 Texas Instruments
   5  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
   6  *
   7  * This program is free software; you can redistribute it and/or modify it
   8  * under the terms of the GNU General Public License version 2 as published by
   9  * the Free Software Foundation.
  10  */
  11
  12 #include <linux/gpio/consumer.h>
  13 #include <linux/module.h>
  14 #include <linux/platform_device.h>
  15 #include <linux/slab.h>
  16 #include <linux/of.h>
  17 #include <linux/of_gpio.h>
  18 #include <linux/regulator/consumer.h>
  19
  20 #include <video/omap-panel-data.h>
  21 #include <video/of_display_timing.h>
  22
  23 #include "../dss/omapdss.h"
  24
  25 struct panel_drv_data {
  26         struct omap_dss_device dssdev;
  27         struct omap_dss_device *in;
  28
  29         int data_lines;
  30
  31         struct omap_video_timings videomode;
  32
  33         /* used for non-DT boot, to be removed */
  34         int backlight_gpio;
  35
  36         struct gpio_desc *enable_gpio;
  37         struct regulator *vcc_supply;
  38 };
  39
  40 #define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
  41
  42 static int panel_dpi_connect(struct omap_dss_device *dssdev)
  43 {
  44         struct panel_drv_data *ddata = to_panel_data(dssdev);
  45         struct omap_dss_device *in = ddata->in;
  46         int r;
  47
  48         if (omapdss_device_is_connected(dssdev))
  49                 return 0;
  50
  51         r = in->ops.dpi->connect(in, dssdev);
  52         if (r)
  53                 return r;
  54
  55         return 0;
  56 }
  57
  58 static void panel_dpi_disconnect(struct omap_dss_device *dssdev)
  59 {
  60         struct panel_drv_data *ddata = to_panel_data(dssdev);
  61         struct omap_dss_device *in = ddata->in;
  62
  63         if (!omapdss_device_is_connected(dssdev))
  64                 return;
  65
  66         in->ops.dpi->disconnect(in, dssdev);
  67 }
  68
  69 static int panel_dpi_enable(struct omap_dss_device *dssdev)
  70 {
  71         struct panel_drv_data *ddata = to_panel_data(dssdev);
  72         struct omap_dss_device *in = ddata->in;
  73         int r;
  74
  75         if (!omapdss_device_is_connected(dssdev))
  76                 return -ENODEV;
  77
  78         if (omapdss_device_is_enabled(dssdev))
  79                 return 0;
  80
  81         if (ddata->data_lines)
  82                 in->ops.dpi->set_data_lines(in, ddata->data_lines);
  83         in->ops.dpi->set_timings(in, &ddata->videomode);
  84
  85         r = in->ops.dpi->enable(in);
  86         if (r)
  87                 return r;
  88
  89         r = regulator_enable(ddata->vcc_supply);
  90         if (r) {
  91                 in->ops.dpi->disable(in);
  92                 return r;
  93         }
  94
  95         gpiod_set_value_cansleep(ddata->enable_gpio, 1);
  96
  97         if (gpio_is_valid(ddata->backlight_gpio))
  98                 gpio_set_value_cansleep(ddata->backlight_gpio, 1);
  99
 100         dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 101
 102         return 0;
 103 }
 104
 105 static void panel_dpi_disable(struct omap_dss_device *dssdev)
 106 {
 107         struct panel_drv_data *ddata = to_panel_data(dssdev);
 108         struct omap_dss_device *in = ddata->in;
 109
 110         if (!omapdss_device_is_enabled(dssdev))
 111                 return;
 112
 113         if (gpio_is_valid(ddata->backlight_gpio))
 114                 gpio_set_value_cansleep(ddata->backlight_gpio, 0);
 115
 116         gpiod_set_value_cansleep(ddata->enable_gpio, 0);
 117         regulator_disable(ddata->vcc_supply);
 118
 119         in->ops.dpi->disable(in);
 120
 121         dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
 122 }
 123
 124 static void panel_dpi_set_timings(struct omap_dss_device *dssdev,
 125                 struct omap_video_timings *timings)
 126 {
 127         struct panel_drv_data *ddata = to_panel_data(dssdev);
 128         struct omap_dss_device *in = ddata->in;
 129
 130         ddata->videomode = *timings;
 131         dssdev->panel.timings = *timings;
 132
 133         in->ops.dpi->set_timings(in, timings);
 134 }
 135
 136 static void panel_dpi_get_timings(struct omap_dss_device *dssdev,
 137                 struct omap_video_timings *timings)
 138 {
 139         struct panel_drv_data *ddata = to_panel_data(dssdev);
 140
 141         *timings = ddata->videomode;
 142 }
 143
 144 static int panel_dpi_check_timings(struct omap_dss_device *dssdev,
 145                 struct omap_video_timings *timings)
 146 {
 147         struct panel_drv_data *ddata = to_panel_data(dssdev);
 148         struct omap_dss_device *in = ddata->in;
 149
 150         return in->ops.dpi->check_timings(in, timings);
 151 }
 152
 153 static struct omap_dss_driver panel_dpi_ops = {
 154         .connect        = panel_dpi_connect,
 155         .disconnect     = panel_dpi_disconnect,
 156
 157         .enable         = panel_dpi_enable,
 158         .disable        = panel_dpi_disable,
 159
 160         .set_timings    = panel_dpi_set_timings,
 161         .get_timings    = panel_dpi_get_timings,
 162         .check_timings  = panel_dpi_check_timings,
 163
 164         .get_resolution = omapdss_default_get_resolution,
 165 };
 166
 167 static int panel_dpi_probe_pdata(struct platform_device *pdev)
 168 {
 169         const struct panel_dpi_platform_data *pdata;
 170         struct panel_drv_data *ddata = platform_get_drvdata(pdev);
 171         struct omap_dss_device *dssdev, *in;
 172         struct videomode vm;
 173         int r;
 174
 175         pdata = dev_get_platdata(&pdev->dev);
 176
 177         in = omap_dss_find_output(pdata->source);
 178         if (in == NULL) {
 179                 dev_err(&pdev->dev, "failed to find video source '%s'\n",
 180                                 pdata->source);
 181                 return -EPROBE_DEFER;
 182         }
 183
 184         ddata->in = in;
 185
 186         ddata->data_lines = pdata->data_lines;
 187
 188         videomode_from_timing(pdata->display_timing, &vm);
 189         videomode_to_omap_video_timings(&vm, &ddata->videomode);
 190
 191         dssdev = &ddata->dssdev;
 192         dssdev->name = pdata->name;
 193
 194         r = devm_gpio_request_one(&pdev->dev, pdata->enable_gpio,
 195                                         GPIOF_OUT_INIT_LOW, "panel enable");
 196         if (r)
 197                 goto err_gpio;
 198
 199         ddata->enable_gpio = gpio_to_desc(pdata->enable_gpio);
 200
 201         ddata->backlight_gpio = pdata->backlight_gpio;
 202
 203         return 0;
 204
 205 err_gpio:
 206         omap_dss_put_device(ddata->in);
 207         return r;
 208 }
 209
 210 static int panel_dpi_probe_of(struct platform_device *pdev)
 211 {
 212         struct panel_drv_data *ddata = platform_get_drvdata(pdev);
 213         struct device_node *node = pdev->dev.of_node;
 214         struct omap_dss_device *in;
 215         int r;
 216         struct display_timing timing;
 217         struct videomode vm;
 218         struct gpio_desc *gpio;
 219
 220         gpio = devm_gpiod_get_optional(&pdev->dev, "enable", GPIOD_OUT_LOW);
 221         if (IS_ERR(gpio))
 222                 return PTR_ERR(gpio);
 223
 224         ddata->enable_gpio = gpio;
 225
 226         /*
 227          * Many different panels are supported by this driver and there are
 228          * probably very different needs for their reset pins in regards to
 229          * timing and order relative to the enable gpio. So for now it's just
 230          * ensured that the reset line isn't active.
 231          */
 232         gpio = devm_gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
 233         if (IS_ERR(gpio))
 234                 return PTR_ERR(gpio);
 235
 236         ddata->vcc_supply = devm_regulator_get(&pdev->dev, "vcc");
 237         if (IS_ERR(ddata->vcc_supply))
 238                 return PTR_ERR(ddata->vcc_supply);
 239
 240         ddata->backlight_gpio = -ENOENT;
 241
 242         r = of_get_display_timing(node, "panel-timing", &timing);
 243         if (r) {
 244                 dev_err(&pdev->dev, "failed to get video timing\n");
 245                 return r;
 246         }
 247
 248         videomode_from_timing(&timing, &vm);
 249         videomode_to_omap_video_timings(&vm, &ddata->videomode);
 250
 251         in = omapdss_of_find_source_for_first_ep(node);
 252         if (IS_ERR(in)) {
 253                 dev_err(&pdev->dev, "failed to find video source\n");
 254                 return PTR_ERR(in);
 255         }
 256
 257         ddata->in = in;
 258
 259         return 0;
 260 }
 261
 262 static int panel_dpi_probe(struct platform_device *pdev)
 263 {
 264         struct panel_drv_data *ddata;
 265         struct omap_dss_device *dssdev;
 266         int r;
 267
 268         ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
 269         if (ddata == NULL)
 270                 return -ENOMEM;
 271
 272         platform_set_drvdata(pdev, ddata);
 273
 274         if (dev_get_platdata(&pdev->dev)) {
 275                 r = panel_dpi_probe_pdata(pdev);
 276                 if (r)
 277                         return r;
 278         } else if (pdev->dev.of_node) {
 279                 r = panel_dpi_probe_of(pdev);
 280                 if (r)
 281                         return r;
 282         } else {
 283                 return -ENODEV;
 284         }
 285
 286         if (gpio_is_valid(ddata->backlight_gpio)) {
 287                 r = devm_gpio_request_one(&pdev->dev, ddata->backlight_gpio,
 288                                 GPIOF_OUT_INIT_LOW, "panel backlight");
 289                 if (r)
 290                         goto err_gpio;
 291         }
 292
 293         dssdev = &ddata->dssdev;
 294         dssdev->dev = &pdev->dev;
 295         dssdev->driver = &panel_dpi_ops;
 296         dssdev->type = OMAP_DISPLAY_TYPE_DPI;
 297         dssdev->owner = THIS_MODULE;
 298         dssdev->panel.timings = ddata->videomode;
 299         dssdev->phy.dpi.data_lines = ddata->data_lines;
 300
 301         r = omapdss_register_display(dssdev);
 302         if (r) {
 303                 dev_err(&pdev->dev, "Failed to register panel\n");
 304                 goto err_reg;
 305         }
 306
 307         return 0;
 308
 309 err_reg:
 310 err_gpio:
 311         omap_dss_put_device(ddata->in);
 312         return r;
 313 }
 314
 315 static int __exit panel_dpi_remove(struct platform_device *pdev)
 316 {
 317         struct panel_drv_data *ddata = platform_get_drvdata(pdev);
 318         struct omap_dss_device *dssdev = &ddata->dssdev;
 319         struct omap_dss_device *in = ddata->in;
 320
 321         omapdss_unregister_display(dssdev);
 322
 323         panel_dpi_disable(dssdev);
 324         panel_dpi_disconnect(dssdev);
 325
 326         omap_dss_put_device(in);
 327
 328         return 0;
 329 }
 330
 331 static const struct of_device_id panel_dpi_of_match[] = {
 332         { .compatible = "omapdss,panel-dpi", },
 333         {},
 334 };
 335
 336 MODULE_DEVICE_TABLE(of, panel_dpi_of_match);
 337
 338 static struct platform_driver panel_dpi_driver = {
 339         .probe = panel_dpi_probe,
 340         .remove = __exit_p(panel_dpi_remove),
 341         .driver = {
 342                 .name = "panel-dpi",
 343                 .of_match_table = panel_dpi_of_match,
 344                 .suppress_bind_attrs = true,
 345         },
 346 };
 347
 348 module_platform_driver(panel_dpi_driver);
 349
 350 MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
 351 MODULE_DESCRIPTION("Generic MIPI DPI Panel Driver");
 352 MODULE_LICENSE("GPL");