drivers/gpu/drm/msm/edp/edp_ctrl.c

   1 /*
   2  * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 and
   6  * only version 2 as published by the Free Software Foundation.
   7  *
   8  * This program is distributed in the hope that it will be useful,
   9  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11  * GNU General Public License for more details.
  12  */
  13
  14 #include <linux/clk.h>
  15 #include <linux/gpio/consumer.h>
  16 #include <linux/regulator/consumer.h>
  17
  18 #include "drm_crtc.h"
  19 #include "drm_dp_helper.h"
  20 #include "drm_edid.h"
  21 #include "edp.h"
  22 #include "edp.xml.h"
  23
  24 #define VDDA_UA_ON_LOAD         100000  /* uA units */
  25 #define VDDA_UA_OFF_LOAD        100     /* uA units */
  26
  27 #define DPCD_LINK_VOLTAGE_MAX           4
  28 #define DPCD_LINK_PRE_EMPHASIS_MAX      4
  29
  30 #define EDP_LINK_BW_MAX         DP_LINK_BW_2_7
  31
  32 /* Link training return value */
  33 #define EDP_TRAIN_FAIL          -1
  34 #define EDP_TRAIN_SUCCESS       0
  35 #define EDP_TRAIN_RECONFIG      1
  36
  37 #define EDP_CLK_MASK_AHB                BIT(0)
  38 #define EDP_CLK_MASK_AUX                BIT(1)
  39 #define EDP_CLK_MASK_LINK               BIT(2)
  40 #define EDP_CLK_MASK_PIXEL              BIT(3)
  41 #define EDP_CLK_MASK_MDP_CORE           BIT(4)
  42 #define EDP_CLK_MASK_LINK_CHAN  (EDP_CLK_MASK_LINK | EDP_CLK_MASK_PIXEL)
  43 #define EDP_CLK_MASK_AUX_CHAN   \
  44         (EDP_CLK_MASK_AHB | EDP_CLK_MASK_AUX | EDP_CLK_MASK_MDP_CORE)
  45 #define EDP_CLK_MASK_ALL        (EDP_CLK_MASK_AUX_CHAN | EDP_CLK_MASK_LINK_CHAN)
  46
  47 #define EDP_BACKLIGHT_MAX       255
  48
  49 #define EDP_INTR_STATUS1        \
  50         (EDP_INTERRUPT_REG_1_HPD | EDP_INTERRUPT_REG_1_AUX_I2C_DONE | \
  51         EDP_INTERRUPT_REG_1_WRONG_ADDR | EDP_INTERRUPT_REG_1_TIMEOUT | \
  52         EDP_INTERRUPT_REG_1_NACK_DEFER | EDP_INTERRUPT_REG_1_WRONG_DATA_CNT | \
  53         EDP_INTERRUPT_REG_1_I2C_NACK | EDP_INTERRUPT_REG_1_I2C_DEFER | \
  54         EDP_INTERRUPT_REG_1_PLL_UNLOCK | EDP_INTERRUPT_REG_1_AUX_ERROR)
  55 #define EDP_INTR_MASK1  (EDP_INTR_STATUS1 << 2)
  56 #define EDP_INTR_STATUS2        \
  57         (EDP_INTERRUPT_REG_2_READY_FOR_VIDEO | \
  58         EDP_INTERRUPT_REG_2_IDLE_PATTERNs_SENT | \
  59         EDP_INTERRUPT_REG_2_FRAME_END | EDP_INTERRUPT_REG_2_CRC_UPDATED)
  60 #define EDP_INTR_MASK2  (EDP_INTR_STATUS2 << 2)
  61
  62 struct edp_ctrl {
  63         struct platform_device *pdev;
  64
  65         void __iomem *base;
  66
  67         /* regulators */
  68         struct regulator *vdda_vreg;    /* 1.8 V */
  69         struct regulator *lvl_vreg;
  70
  71         /* clocks */
  72         struct clk *aux_clk;
  73         struct clk *pixel_clk;
  74         struct clk *ahb_clk;
  75         struct clk *link_clk;
  76         struct clk *mdp_core_clk;
  77
  78         /* gpios */
  79         struct gpio_desc *panel_en_gpio;
  80         struct gpio_desc *panel_hpd_gpio;
  81
  82         /* completion and mutex */
  83         struct completion idle_comp;
  84         struct mutex dev_mutex; /* To protect device power status */
  85
  86         /* work queue */
  87         struct work_struct on_work;
  88         struct work_struct off_work;
  89         struct workqueue_struct *workqueue;
  90
  91         /* Interrupt register lock */
  92         spinlock_t irq_lock;
  93
  94         bool edp_connected;
  95         bool power_on;
  96
  97         /* edid raw data */
  98         struct edid *edid;
  99
 100         struct drm_dp_link dp_link;
 101         struct drm_dp_aux *drm_aux;
 102
 103         /* dpcd raw data */
 104         u8 dpcd[DP_RECEIVER_CAP_SIZE];
 105
 106         /* Link status */
 107         u8 link_rate;
 108         u8 lane_cnt;
 109         u8 v_level;
 110         u8 p_level;
 111
 112         /* Timing status */
 113         u8 interlaced;
 114         u32 pixel_rate; /* in kHz */
 115         u32 color_depth;
 116
 117         struct edp_aux *aux;
 118         struct edp_phy *phy;
 119 };
 120
 121 struct edp_pixel_clk_div {
 122         u32 rate; /* in kHz */
 123         u32 m;
 124         u32 n;
 125 };
 126
 127 #define EDP_PIXEL_CLK_NUM 8
 128 static const struct edp_pixel_clk_div clk_divs[2][EDP_PIXEL_CLK_NUM] = {
 129         { /* Link clock = 162MHz, source clock = 810MHz */
 130                 {119000, 31,  211}, /* WSXGA+ 1680x1050@60Hz CVT */
 131                 {130250, 32,  199}, /* UXGA 1600x1200@60Hz CVT */
 132                 {148500, 11,  60},  /* FHD 1920x1080@60Hz */
 133                 {154000, 50,  263}, /* WUXGA 1920x1200@60Hz CVT */
 134                 {209250, 31,  120}, /* QXGA 2048x1536@60Hz CVT */
 135                 {268500, 119, 359}, /* WQXGA 2560x1600@60Hz CVT */
 136                 {138530, 33,  193}, /* AUO B116HAN03.0 Panel */
 137                 {141400, 48,  275}, /* AUO B133HTN01.2 Panel */
 138         },
 139         { /* Link clock = 270MHz, source clock = 675MHz */
 140                 {119000, 52,  295}, /* WSXGA+ 1680x1050@60Hz CVT */
 141                 {130250, 11,  57},  /* UXGA 1600x1200@60Hz CVT */
 142                 {148500, 11,  50},  /* FHD 1920x1080@60Hz */
 143                 {154000, 47,  206}, /* WUXGA 1920x1200@60Hz CVT */
 144                 {209250, 31,  100}, /* QXGA 2048x1536@60Hz CVT */
 145                 {268500, 107, 269}, /* WQXGA 2560x1600@60Hz CVT */
 146                 {138530, 63,  307}, /* AUO B116HAN03.0 Panel */
 147                 {141400, 53,  253}, /* AUO B133HTN01.2 Panel */
 148         },
 149 };
 150
 151 static int edp_clk_init(struct edp_ctrl *ctrl)
 152 {
 153         struct device *dev = &ctrl->pdev->dev;
 154         int ret;
 155
 156         ctrl->aux_clk = devm_clk_get(dev, "core_clk");
 157         if (IS_ERR(ctrl->aux_clk)) {
 158                 ret = PTR_ERR(ctrl->aux_clk);
 159                 pr_err("%s: Can't find aux_clk, %d\n", __func__, ret);
 160                 ctrl->aux_clk = NULL;
 161                 return ret;
 162         }
 163
 164         ctrl->pixel_clk = devm_clk_get(dev, "pixel_clk");
 165         if (IS_ERR(ctrl->pixel_clk)) {
 166                 ret = PTR_ERR(ctrl->pixel_clk);
 167                 pr_err("%s: Can't find pixel_clk, %d\n", __func__, ret);
 168                 ctrl->pixel_clk = NULL;
 169                 return ret;
 170         }
 171
 172         ctrl->ahb_clk = devm_clk_get(dev, "iface_clk");
 173         if (IS_ERR(ctrl->ahb_clk)) {
 174                 ret = PTR_ERR(ctrl->ahb_clk);
 175                 pr_err("%s: Can't find ahb_clk, %d\n", __func__, ret);
 176                 ctrl->ahb_clk = NULL;
 177                 return ret;
 178         }
 179
 180         ctrl->link_clk = devm_clk_get(dev, "link_clk");
 181         if (IS_ERR(ctrl->link_clk)) {
 182                 ret = PTR_ERR(ctrl->link_clk);
 183                 pr_err("%s: Can't find link_clk, %d\n", __func__, ret);
 184                 ctrl->link_clk = NULL;
 185                 return ret;
 186         }
 187
 188         /* need mdp core clock to receive irq */
 189         ctrl->mdp_core_clk = devm_clk_get(dev, "mdp_core_clk");
 190         if (IS_ERR(ctrl->mdp_core_clk)) {
 191                 ret = PTR_ERR(ctrl->mdp_core_clk);
 192                 pr_err("%s: Can't find mdp_core_clk, %d\n", __func__, ret);
 193                 ctrl->mdp_core_clk = NULL;
 194                 return ret;
 195         }
 196
 197         return 0;
 198 }
 199
 200 static int edp_clk_enable(struct edp_ctrl *ctrl, u32 clk_mask)
 201 {
 202         int ret;
 203
 204         DBG("mask=%x", clk_mask);
 205         /* ahb_clk should be enabled first */
 206         if (clk_mask & EDP_CLK_MASK_AHB) {
 207                 ret = clk_prepare_enable(ctrl->ahb_clk);
 208                 if (ret) {
 209                         pr_err("%s: Failed to enable ahb clk\n", __func__);
 210                         goto f0;
 211                 }
 212         }
 213         if (clk_mask & EDP_CLK_MASK_AUX) {
 214                 ret = clk_set_rate(ctrl->aux_clk, 19200000);
 215                 if (ret) {
 216                         pr_err("%s: Failed to set rate aux clk\n", __func__);
 217                         goto f1;
 218                 }
 219                 ret = clk_prepare_enable(ctrl->aux_clk);
 220                 if (ret) {
 221                         pr_err("%s: Failed to enable aux clk\n", __func__);
 222                         goto f1;
 223                 }
 224         }
 225         /* Need to set rate and enable link_clk prior to pixel_clk */
 226         if (clk_mask & EDP_CLK_MASK_LINK) {
 227                 DBG("edp->link_clk, set_rate %ld",
 228                                 (unsigned long)ctrl->link_rate * 27000000);
 229                 ret = clk_set_rate(ctrl->link_clk,
 230                                 (unsigned long)ctrl->link_rate * 27000000);
 231                 if (ret) {
 232                         pr_err("%s: Failed to set rate to link clk\n",
 233                                 __func__);
 234                         goto f2;
 235                 }
 236
 237                 ret = clk_prepare_enable(ctrl->link_clk);
 238                 if (ret) {
 239                         pr_err("%s: Failed to enable link clk\n", __func__);
 240                         goto f2;
 241                 }
 242         }
 243         if (clk_mask & EDP_CLK_MASK_PIXEL) {
 244                 DBG("edp->pixel_clk, set_rate %ld",
 245                                 (unsigned long)ctrl->pixel_rate * 1000);
 246                 ret = clk_set_rate(ctrl->pixel_clk,
 247                                 (unsigned long)ctrl->pixel_rate * 1000);
 248                 if (ret) {
 249                         pr_err("%s: Failed to set rate to pixel clk\n",
 250                                 __func__);
 251                         goto f3;
 252                 }
 253
 254                 ret = clk_prepare_enable(ctrl->pixel_clk);
 255                 if (ret) {
 256                         pr_err("%s: Failed to enable pixel clk\n", __func__);
 257                         goto f3;
 258                 }
 259         }
 260         if (clk_mask & EDP_CLK_MASK_MDP_CORE) {
 261                 ret = clk_prepare_enable(ctrl->mdp_core_clk);
 262                 if (ret) {
 263                         pr_err("%s: Failed to enable mdp core clk\n", __func__);
 264                         goto f4;
 265                 }
 266         }
 267
 268         return 0;
 269
 270 f4:
 271         if (clk_mask & EDP_CLK_MASK_PIXEL)
 272                 clk_disable_unprepare(ctrl->pixel_clk);
 273 f3:
 274         if (clk_mask & EDP_CLK_MASK_LINK)
 275                 clk_disable_unprepare(ctrl->link_clk);
 276 f2:
 277         if (clk_mask & EDP_CLK_MASK_AUX)
 278                 clk_disable_unprepare(ctrl->aux_clk);
 279 f1:
 280         if (clk_mask & EDP_CLK_MASK_AHB)
 281                 clk_disable_unprepare(ctrl->ahb_clk);
 282 f0:
 283         return ret;
 284 }
 285
 286 static void edp_clk_disable(struct edp_ctrl *ctrl, u32 clk_mask)
 287 {
 288         if (clk_mask & EDP_CLK_MASK_MDP_CORE)
 289                 clk_disable_unprepare(ctrl->mdp_core_clk);
 290         if (clk_mask & EDP_CLK_MASK_PIXEL)
 291                 clk_disable_unprepare(ctrl->pixel_clk);
 292         if (clk_mask & EDP_CLK_MASK_LINK)
 293                 clk_disable_unprepare(ctrl->link_clk);
 294         if (clk_mask & EDP_CLK_MASK_AUX)
 295                 clk_disable_unprepare(ctrl->aux_clk);
 296         if (clk_mask & EDP_CLK_MASK_AHB)
 297                 clk_disable_unprepare(ctrl->ahb_clk);
 298 }
 299
 300 static int edp_regulator_init(struct edp_ctrl *ctrl)
 301 {
 302         struct device *dev = &ctrl->pdev->dev;
 303         int ret;
 304
 305         DBG("");
 306         ctrl->vdda_vreg = devm_regulator_get(dev, "vdda");
 307         ret = PTR_ERR_OR_ZERO(ctrl->vdda_vreg);
 308         if (ret) {
 309                 pr_err("%s: Could not get vdda reg, ret = %d\n", __func__,
 310                                 ret);
 311                 ctrl->vdda_vreg = NULL;
 312                 return ret;
 313         }
 314         ctrl->lvl_vreg = devm_regulator_get(dev, "lvl-vdd");
 315         ret = PTR_ERR_OR_ZERO(ctrl->lvl_vreg);
 316         if (ret) {
 317                 pr_err("%s: Could not get lvl-vdd reg, ret = %d\n", __func__,
 318                                 ret);
 319                 ctrl->lvl_vreg = NULL;
 320                 return ret;
 321         }
 322
 323         return 0;
 324 }
 325
 326 static int edp_regulator_enable(struct edp_ctrl *ctrl)
 327 {
 328         int ret;
 329
 330         ret = regulator_set_load(ctrl->vdda_vreg, VDDA_UA_ON_LOAD);
 331         if (ret < 0) {
 332                 pr_err("%s: vdda_vreg set regulator mode failed.\n", __func__);
 333                 goto vdda_set_fail;
 334         }
 335
 336         ret = regulator_enable(ctrl->vdda_vreg);
 337         if (ret) {
 338                 pr_err("%s: Failed to enable vdda_vreg regulator.\n", __func__);
 339                 goto vdda_enable_fail;
 340         }
 341
 342         ret = regulator_enable(ctrl->lvl_vreg);
 343         if (ret) {
 344                 pr_err("Failed to enable lvl-vdd reg regulator, %d", ret);
 345                 goto lvl_enable_fail;
 346         }
 347
 348         DBG("exit");
 349         return 0;
 350
 351 lvl_enable_fail:
 352         regulator_disable(ctrl->vdda_vreg);
 353 vdda_enable_fail:
 354         regulator_set_load(ctrl->vdda_vreg, VDDA_UA_OFF_LOAD);
 355 vdda_set_fail:
 356         return ret;
 357 }
 358
 359 static void edp_regulator_disable(struct edp_ctrl *ctrl)
 360 {
 361         regulator_disable(ctrl->lvl_vreg);
 362         regulator_disable(ctrl->vdda_vreg);
 363         regulator_set_load(ctrl->vdda_vreg, VDDA_UA_OFF_LOAD);
 364 }
 365
 366 static int edp_gpio_config(struct edp_ctrl *ctrl)
 367 {
 368         struct device *dev = &ctrl->pdev->dev;
 369         int ret;
 370
 371         ctrl->panel_hpd_gpio = devm_gpiod_get(dev, "panel-hpd", GPIOD_IN);
 372         if (IS_ERR(ctrl->panel_hpd_gpio)) {
 373                 ret = PTR_ERR(ctrl->panel_hpd_gpio);
 374                 ctrl->panel_hpd_gpio = NULL;
 375                 pr_err("%s: cannot get panel-hpd-gpios, %d\n", __func__, ret);
 376                 return ret;
 377         }
 378
 379         ctrl->panel_en_gpio = devm_gpiod_get(dev, "panel-en", GPIOD_OUT_LOW);
 380         if (IS_ERR(ctrl->panel_en_gpio)) {
 381                 ret = PTR_ERR(ctrl->panel_en_gpio);
 382                 ctrl->panel_en_gpio = NULL;
 383                 pr_err("%s: cannot get panel-en-gpios, %d\n", __func__, ret);
 384                 return ret;
 385         }
 386
 387         DBG("gpio on");
 388
 389         return 0;
 390 }
 391
 392 static void edp_ctrl_irq_enable(struct edp_ctrl *ctrl, int enable)
 393 {
 394         unsigned long flags;
 395
 396         DBG("%d", enable);
 397         spin_lock_irqsave(&ctrl->irq_lock, flags);
 398         if (enable) {
 399                 edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_1, EDP_INTR_MASK1);
 400                 edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_2, EDP_INTR_MASK2);
 401         } else {
 402                 edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_1, 0x0);
 403                 edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_2, 0x0);
 404         }
 405         spin_unlock_irqrestore(&ctrl->irq_lock, flags);
 406         DBG("exit");
 407 }
 408
 409 static void edp_fill_link_cfg(struct edp_ctrl *ctrl)
 410 {
 411         u32 prate;
 412         u32 lrate;
 413         u32 bpp;
 414         u8 max_lane = ctrl->dp_link.num_lanes;
 415         u8 lane;
 416
 417         prate = ctrl->pixel_rate;
 418         bpp = ctrl->color_depth * 3;
 419
 420         /*
 421          * By default, use the maximum link rate and minimum lane count,
 422          * so that we can do rate down shift during link training.
 423          */
 424         ctrl->link_rate = drm_dp_link_rate_to_bw_code(ctrl->dp_link.rate);
 425
 426         prate *= bpp;
 427         prate /= 8; /* in kByte */
 428
 429         lrate = 270000; /* in kHz */
 430         lrate *= ctrl->link_rate;
 431         lrate /= 10; /* in kByte, 10 bits --> 8 bits */
 432
 433         for (lane = 1; lane <= max_lane; lane <<= 1) {
 434                 if (lrate >= prate)
 435                         break;
 436                 lrate <<= 1;
 437         }
 438
 439         ctrl->lane_cnt = lane;
 440         DBG("rate=%d lane=%d", ctrl->link_rate, ctrl->lane_cnt);
 441 }
 442
 443 static void edp_config_ctrl(struct edp_ctrl *ctrl)
 444 {
 445         u32 data;
 446         enum edp_color_depth depth;
 447
 448         data = EDP_CONFIGURATION_CTRL_LANES(ctrl->lane_cnt - 1);
 449
 450         if (ctrl->dp_link.capabilities & DP_LINK_CAP_ENHANCED_FRAMING)
 451                 data |= EDP_CONFIGURATION_CTRL_ENHANCED_FRAMING;
 452
 453         depth = EDP_6BIT;
 454         if (ctrl->color_depth == 8)
 455                 depth = EDP_8BIT;
 456
 457         data |= EDP_CONFIGURATION_CTRL_COLOR(depth);
 458
 459         if (!ctrl->interlaced)  /* progressive */
 460                 data |= EDP_CONFIGURATION_CTRL_PROGRESSIVE;
 461
 462         data |= (EDP_CONFIGURATION_CTRL_SYNC_CLK |
 463                 EDP_CONFIGURATION_CTRL_STATIC_MVID);
 464
 465         edp_write(ctrl->base + REG_EDP_CONFIGURATION_CTRL, data);
 466 }
 467
 468 static void edp_state_ctrl(struct edp_ctrl *ctrl, u32 state)
 469 {
 470         edp_write(ctrl->base + REG_EDP_STATE_CTRL, state);
 471         /* Make sure H/W status is set */
 472         wmb();
 473 }
 474
 475 static int edp_lane_set_write(struct edp_ctrl *ctrl,
 476         u8 voltage_level, u8 pre_emphasis_level)
 477 {
 478         int i;
 479         u8 buf[4];
 480
 481         if (voltage_level >= DPCD_LINK_VOLTAGE_MAX)
 482                 voltage_level |= 0x04;
 483
 484         if (pre_emphasis_level >= DPCD_LINK_PRE_EMPHASIS_MAX)
 485                 pre_emphasis_level |= 0x04;
 486
 487         pre_emphasis_level <<= 3;
 488
 489         for (i = 0; i < 4; i++)
 490                 buf[i] = voltage_level | pre_emphasis_level;
 491
 492         DBG("%s: p|v=0x%x", __func__, voltage_level | pre_emphasis_level);
 493         if (drm_dp_dpcd_write(ctrl->drm_aux, 0x103, buf, 4) < 4) {
 494                 pr_err("%s: Set sw/pe to panel failed\n", __func__);
 495                 return -ENOLINK;
 496         }
 497
 498         return 0;
 499 }
 500
 501 static int edp_train_pattern_set_write(struct edp_ctrl *ctrl, u8 pattern)
 502 {
 503         u8 p = pattern;
 504
 505         DBG("pattern=%x", p);
 506         if (drm_dp_dpcd_write(ctrl->drm_aux,
 507                                 DP_TRAINING_PATTERN_SET, &p, 1) < 1) {
 508                 pr_err("%s: Set training pattern to panel failed\n", __func__);
 509                 return -ENOLINK;
 510         }
 511
 512         return 0;
 513 }
 514
 515 static void edp_sink_train_set_adjust(struct edp_ctrl *ctrl,
 516         const u8 *link_status)
 517 {
 518         int i;
 519         u8 max = 0;
 520         u8 data;
 521
 522         /* use the max level across lanes */
 523         for (i = 0; i < ctrl->lane_cnt; i++) {
 524                 data = drm_dp_get_adjust_request_voltage(link_status, i);
 525                 DBG("lane=%d req_voltage_swing=0x%x", i, data);
 526                 if (max < data)
 527                         max = data;
 528         }
 529
 530         ctrl->v_level = max >> DP_TRAIN_VOLTAGE_SWING_SHIFT;
 531
 532         /* use the max level across lanes */
 533         max = 0;
 534         for (i = 0; i < ctrl->lane_cnt; i++) {
 535                 data = drm_dp_get_adjust_request_pre_emphasis(link_status, i);
 536                 DBG("lane=%d req_pre_emphasis=0x%x", i, data);
 537                 if (max < data)
 538                         max = data;
 539         }
 540
 541         ctrl->p_level = max >> DP_TRAIN_PRE_EMPHASIS_SHIFT;
 542         DBG("v_level=%d, p_level=%d", ctrl->v_level, ctrl->p_level);
 543 }
 544
 545 static void edp_host_train_set(struct edp_ctrl *ctrl, u32 train)
 546 {
 547         int cnt = 10;
 548         u32 data;
 549         u32 shift = train - 1;
 550
 551         DBG("train=%d", train);
 552
 553         edp_state_ctrl(ctrl, EDP_STATE_CTRL_TRAIN_PATTERN_1 << shift);
 554         while (--cnt) {
 555                 data = edp_read(ctrl->base + REG_EDP_MAINLINK_READY);
 556                 if (data & (EDP_MAINLINK_READY_TRAIN_PATTERN_1_READY << shift))
 557                         break;
 558         }
 559
 560         if (cnt == 0)
 561                 pr_err("%s: set link_train=%d failed\n", __func__, train);
 562 }
 563
 564 static const u8 vm_pre_emphasis[4][4] = {
 565         {0x03, 0x06, 0x09, 0x0C},       /* pe0, 0 db */
 566         {0x03, 0x06, 0x09, 0xFF},       /* pe1, 3.5 db */
 567         {0x03, 0x06, 0xFF, 0xFF},       /* pe2, 6.0 db */
 568         {0x03, 0xFF, 0xFF, 0xFF}        /* pe3, 9.5 db */
 569 };
 570
 571 /* voltage swing, 0.2v and 1.0v are not support */
 572 static const u8 vm_voltage_swing[4][4] = {
 573         {0x14, 0x18, 0x1A, 0x1E}, /* sw0, 0.4v  */
 574         {0x18, 0x1A, 0x1E, 0xFF}, /* sw1, 0.6 v */
 575         {0x1A, 0x1E, 0xFF, 0xFF}, /* sw1, 0.8 v */
 576         {0x1E, 0xFF, 0xFF, 0xFF}  /* sw1, 1.2 v, optional */
 577 };
 578
 579 static int edp_voltage_pre_emphasise_set(struct edp_ctrl *ctrl)
 580 {
 581         u32 value0;
 582         u32 value1;
 583
 584         DBG("v=%d p=%d", ctrl->v_level, ctrl->p_level);
 585
 586         value0 = vm_pre_emphasis[(int)(ctrl->v_level)][(int)(ctrl->p_level)];
 587         value1 = vm_voltage_swing[(int)(ctrl->v_level)][(int)(ctrl->p_level)];
 588
 589         /* Configure host and panel only if both values are allowed */
 590         if (value0 != 0xFF && value1 != 0xFF) {
 591                 msm_edp_phy_vm_pe_cfg(ctrl->phy, value0, value1);
 592                 return edp_lane_set_write(ctrl, ctrl->v_level, ctrl->p_level);
 593         }
 594
 595         return -EINVAL;
 596 }
 597
 598 static int edp_start_link_train_1(struct edp_ctrl *ctrl)
 599 {
 600         u8 link_status[DP_LINK_STATUS_SIZE];
 601         u8 old_v_level;
 602         int tries;
 603         int ret;
 604         int rlen;
 605
 606         DBG("");
 607
 608         edp_host_train_set(ctrl, DP_TRAINING_PATTERN_1);
 609         ret = edp_voltage_pre_emphasise_set(ctrl);
 610         if (ret)
 611                 return ret;
 612         ret = edp_train_pattern_set_write(ctrl,
 613                         DP_TRAINING_PATTERN_1 | DP_RECOVERED_CLOCK_OUT_EN);
 614         if (ret)
 615                 return ret;
 616
 617         tries = 0;
 618         old_v_level = ctrl->v_level;
 619         while (1) {
 620                 drm_dp_link_train_clock_recovery_delay(ctrl->dpcd);
 621
 622                 rlen = drm_dp_dpcd_read_link_status(ctrl->drm_aux, link_status);
 623                 if (rlen < DP_LINK_STATUS_SIZE) {
 624                         pr_err("%s: read link status failed\n", __func__);
 625                         return -ENOLINK;
 626                 }
 627                 if (drm_dp_clock_recovery_ok(link_status, ctrl->lane_cnt)) {
 628                         ret = 0;
 629                         break;
 630                 }
 631
 632                 if (ctrl->v_level == DPCD_LINK_VOLTAGE_MAX) {
 633                         ret = -1;
 634                         break;
 635                 }
 636
 637                 if (old_v_level == ctrl->v_level) {
 638                         tries++;
 639                         if (tries >= 5) {
 640                                 ret = -1;
 641                                 break;
 642                         }
 643                 } else {
 644                         tries = 0;
 645                         old_v_level = ctrl->v_level;
 646                 }
 647
 648                 edp_sink_train_set_adjust(ctrl, link_status);
 649                 ret = edp_voltage_pre_emphasise_set(ctrl);
 650                 if (ret)
 651                         return ret;
 652         }
 653
 654         return ret;
 655 }
 656
 657 static int edp_start_link_train_2(struct edp_ctrl *ctrl)
 658 {
 659         u8 link_status[DP_LINK_STATUS_SIZE];
 660         int tries = 0;
 661         int ret;
 662         int rlen;
 663
 664         DBG("");
 665
 666         edp_host_train_set(ctrl, DP_TRAINING_PATTERN_2);
 667         ret = edp_voltage_pre_emphasise_set(ctrl);
 668         if (ret)
 669                 return ret;
 670
 671         ret = edp_train_pattern_set_write(ctrl,
 672                         DP_TRAINING_PATTERN_2 | DP_RECOVERED_CLOCK_OUT_EN);
 673         if (ret)
 674                 return ret;
 675
 676         while (1) {
 677                 drm_dp_link_train_channel_eq_delay(ctrl->dpcd);
 678
 679                 rlen = drm_dp_dpcd_read_link_status(ctrl->drm_aux, link_status);
 680                 if (rlen < DP_LINK_STATUS_SIZE) {
 681                         pr_err("%s: read link status failed\n", __func__);
 682                         return -ENOLINK;
 683                 }
 684                 if (drm_dp_channel_eq_ok(link_status, ctrl->lane_cnt)) {
 685                         ret = 0;
 686                         break;
 687                 }
 688
 689                 tries++;
 690                 if (tries > 10) {
 691                         ret = -1;
 692                         break;
 693                 }
 694
 695                 edp_sink_train_set_adjust(ctrl, link_status);
 696                 ret = edp_voltage_pre_emphasise_set(ctrl);
 697                 if (ret)
 698                         return ret;
 699         }
 700
 701         return ret;
 702 }
 703
 704 static int edp_link_rate_down_shift(struct edp_ctrl *ctrl)
 705 {
 706         u32 prate, lrate, bpp;
 707         u8 rate, lane, max_lane;
 708         int changed = 0;
 709
 710         rate = ctrl->link_rate;
 711         lane = ctrl->lane_cnt;
 712         max_lane = ctrl->dp_link.num_lanes;
 713
 714         bpp = ctrl->color_depth * 3;
 715         prate = ctrl->pixel_rate;
 716         prate *= bpp;
 717         prate /= 8; /* in kByte */
 718
 719         if (rate > DP_LINK_BW_1_62 && rate <= EDP_LINK_BW_MAX) {
 720                 rate -= 4;      /* reduce rate */
 721                 changed++;
 722         }
 723
 724         if (changed) {
 725                 if (lane >= 1 && lane < max_lane)
 726                         lane <<= 1;     /* increase lane */
 727
 728                 lrate = 270000; /* in kHz */
 729                 lrate *= rate;
 730                 lrate /= 10; /* kByte, 10 bits --> 8 bits */
 731                 lrate *= lane;
 732
 733                 DBG("new lrate=%u prate=%u(kHz) rate=%d lane=%d p=%u b=%d",
 734                         lrate, prate, rate, lane,
 735                         ctrl->pixel_rate,
 736                         bpp);
 737
 738                 if (lrate > prate) {
 739                         ctrl->link_rate = rate;
 740                         ctrl->lane_cnt = lane;
 741                         DBG("new rate=%d %d", rate, lane);
 742                         return 0;
 743                 }
 744         }
 745
 746         return -EINVAL;
 747 }
 748
 749 static int edp_clear_training_pattern(struct edp_ctrl *ctrl)
 750 {
 751         int ret;
 752
 753         ret = edp_train_pattern_set_write(ctrl, 0);
 754
 755         drm_dp_link_train_channel_eq_delay(ctrl->dpcd);
 756
 757         return ret;
 758 }
 759
 760 static int edp_do_link_train(struct edp_ctrl *ctrl)
 761 {
 762         int ret;
 763         struct drm_dp_link dp_link;
 764
 765         DBG("");
 766         /*
 767          * Set the current link rate and lane cnt to panel. They may have been
 768          * adjusted and the values are different from them in DPCD CAP
 769          */
 770         dp_link.num_lanes = ctrl->lane_cnt;
 771         dp_link.rate = drm_dp_bw_code_to_link_rate(ctrl->link_rate);
 772         dp_link.capabilities = ctrl->dp_link.capabilities;
 773         if (drm_dp_link_configure(ctrl->drm_aux, &dp_link) < 0)
 774                 return EDP_TRAIN_FAIL;
 775
 776         ctrl->v_level = 0; /* start from default level */
 777         ctrl->p_level = 0;
 778
 779         edp_state_ctrl(ctrl, 0);
 780         if (edp_clear_training_pattern(ctrl))
 781                 return EDP_TRAIN_FAIL;
 782
 783         ret = edp_start_link_train_1(ctrl);
 784         if (ret < 0) {
 785                 if (edp_link_rate_down_shift(ctrl) == 0) {
 786                         DBG("link reconfig");
 787                         ret = EDP_TRAIN_RECONFIG;
 788                         goto clear;
 789                 } else {
 790                         pr_err("%s: Training 1 failed", __func__);
 791                         ret = EDP_TRAIN_FAIL;
 792                         goto clear;
 793                 }
 794         }
 795         DBG("Training 1 completed successfully");
 796
 797         edp_state_ctrl(ctrl, 0);
 798         if (edp_clear_training_pattern(ctrl))
 799                 return EDP_TRAIN_FAIL;
 800
 801         ret = edp_start_link_train_2(ctrl);
 802         if (ret < 0) {
 803                 if (edp_link_rate_down_shift(ctrl) == 0) {
 804                         DBG("link reconfig");
 805                         ret = EDP_TRAIN_RECONFIG;
 806                         goto clear;
 807                 } else {
 808                         pr_err("%s: Training 2 failed", __func__);
 809                         ret = EDP_TRAIN_FAIL;
 810                         goto clear;
 811                 }
 812         }
 813         DBG("Training 2 completed successfully");
 814
 815         edp_state_ctrl(ctrl, EDP_STATE_CTRL_SEND_VIDEO);
 816 clear:
 817         edp_clear_training_pattern(ctrl);
 818
 819         return ret;
 820 }
 821
 822 static void edp_clock_synchrous(struct edp_ctrl *ctrl, int sync)
 823 {
 824         u32 data;
 825         enum edp_color_depth depth;
 826
 827         data = edp_read(ctrl->base + REG_EDP_MISC1_MISC0);
 828
 829         if (sync)
 830                 data |= EDP_MISC1_MISC0_SYNC;
 831         else
 832                 data &= ~EDP_MISC1_MISC0_SYNC;
 833
 834         /* only legacy rgb mode supported */
 835         depth = EDP_6BIT; /* Default */
 836         if (ctrl->color_depth == 8)
 837                 depth = EDP_8BIT;
 838         else if (ctrl->color_depth == 10)
 839                 depth = EDP_10BIT;
 840         else if (ctrl->color_depth == 12)
 841                 depth = EDP_12BIT;
 842         else if (ctrl->color_depth == 16)
 843                 depth = EDP_16BIT;
 844
 845         data |= EDP_MISC1_MISC0_COLOR(depth);
 846
 847         edp_write(ctrl->base + REG_EDP_MISC1_MISC0, data);
 848 }
 849
 850 static int edp_sw_mvid_nvid(struct edp_ctrl *ctrl, u32 m, u32 n)
 851 {
 852         u32 n_multi, m_multi = 5;
 853
 854         if (ctrl->link_rate == DP_LINK_BW_1_62) {
 855                 n_multi = 1;
 856         } else if (ctrl->link_rate == DP_LINK_BW_2_7) {
 857                 n_multi = 2;
 858         } else {
 859                 pr_err("%s: Invalid link rate, %d\n", __func__,
 860                         ctrl->link_rate);
 861                 return -EINVAL;
 862         }
 863
 864         edp_write(ctrl->base + REG_EDP_SOFTWARE_MVID, m * m_multi);
 865         edp_write(ctrl->base + REG_EDP_SOFTWARE_NVID, n * n_multi);
 866
 867         return 0;
 868 }
 869
 870 static void edp_mainlink_ctrl(struct edp_ctrl *ctrl, int enable)
 871 {
 872         u32 data = 0;
 873
 874         edp_write(ctrl->base + REG_EDP_MAINLINK_CTRL, EDP_MAINLINK_CTRL_RESET);
 875         /* Make sure fully reset */
 876         wmb();
 877         usleep_range(500, 1000);
 878
 879         if (enable)
 880                 data |= EDP_MAINLINK_CTRL_ENABLE;
 881
 882         edp_write(ctrl->base + REG_EDP_MAINLINK_CTRL, data);
 883 }
 884
 885 static void edp_ctrl_phy_aux_enable(struct edp_ctrl *ctrl, int enable)
 886 {
 887         if (enable) {
 888                 edp_regulator_enable(ctrl);
 889                 edp_clk_enable(ctrl, EDP_CLK_MASK_AUX_CHAN);
 890                 msm_edp_phy_ctrl(ctrl->phy, 1);
 891                 msm_edp_aux_ctrl(ctrl->aux, 1);
 892                 gpiod_set_value(ctrl->panel_en_gpio, 1);
 893         } else {
 894                 gpiod_set_value(ctrl->panel_en_gpio, 0);
 895                 msm_edp_aux_ctrl(ctrl->aux, 0);
 896                 msm_edp_phy_ctrl(ctrl->phy, 0);
 897                 edp_clk_disable(ctrl, EDP_CLK_MASK_AUX_CHAN);
 898                 edp_regulator_disable(ctrl);
 899         }
 900 }
 901
 902 static void edp_ctrl_link_enable(struct edp_ctrl *ctrl, int enable)
 903 {
 904         u32 m, n;
 905
 906         if (enable) {
 907                 /* Enable link channel clocks */
 908                 edp_clk_enable(ctrl, EDP_CLK_MASK_LINK_CHAN);
 909
 910                 msm_edp_phy_lane_power_ctrl(ctrl->phy, true, ctrl->lane_cnt);
 911
 912                 msm_edp_phy_vm_pe_init(ctrl->phy);
 913
 914                 /* Make sure phy is programed */
 915                 wmb();
 916                 msm_edp_phy_ready(ctrl->phy);
 917
 918                 edp_config_ctrl(ctrl);
 919                 msm_edp_ctrl_pixel_clock_valid(ctrl, ctrl->pixel_rate, &m, &n);
 920                 edp_sw_mvid_nvid(ctrl, m, n);
 921                 edp_mainlink_ctrl(ctrl, 1);
 922         } else {
 923                 edp_mainlink_ctrl(ctrl, 0);
 924
 925                 msm_edp_phy_lane_power_ctrl(ctrl->phy, false, 0);
 926                 edp_clk_disable(ctrl, EDP_CLK_MASK_LINK_CHAN);
 927         }
 928 }
 929
 930 static int edp_ctrl_training(struct edp_ctrl *ctrl)
 931 {
 932         int ret;
 933
 934         /* Do link training only when power is on */
 935         if (!ctrl->power_on)
 936                 return -EINVAL;
 937
 938 train_start:
 939         ret = edp_do_link_train(ctrl);
 940         if (ret == EDP_TRAIN_RECONFIG) {
 941                 /* Re-configure main link */
 942                 edp_ctrl_irq_enable(ctrl, 0);
 943                 edp_ctrl_link_enable(ctrl, 0);
 944                 msm_edp_phy_ctrl(ctrl->phy, 0);
 945
 946                 /* Make sure link is fully disabled */
 947                 wmb();
 948                 usleep_range(500, 1000);
 949
 950                 msm_edp_phy_ctrl(ctrl->phy, 1);
 951                 edp_ctrl_link_enable(ctrl, 1);
 952                 edp_ctrl_irq_enable(ctrl, 1);
 953                 goto train_start;
 954         }
 955
 956         return ret;
 957 }
 958
 959 static void edp_ctrl_on_worker(struct work_struct *work)
 960 {
 961         struct edp_ctrl *ctrl = container_of(
 962                                 work, struct edp_ctrl, on_work);
 963         int ret;
 964
 965         mutex_lock(&ctrl->dev_mutex);
 966
 967         if (ctrl->power_on) {
 968                 DBG("already on");
 969                 goto unlock_ret;
 970         }
 971
 972         edp_ctrl_phy_aux_enable(ctrl, 1);
 973         edp_ctrl_link_enable(ctrl, 1);
 974
 975         edp_ctrl_irq_enable(ctrl, 1);
 976         ret = drm_dp_link_power_up(ctrl->drm_aux, &ctrl->dp_link);
 977         if (ret)
 978                 goto fail;
 979
 980         ctrl->power_on = true;
 981
 982         /* Start link training */
 983         ret = edp_ctrl_training(ctrl);
 984         if (ret != EDP_TRAIN_SUCCESS)
 985                 goto fail;
 986
 987         DBG("DONE");
 988         goto unlock_ret;
 989
 990 fail:
 991         edp_ctrl_irq_enable(ctrl, 0);
 992         edp_ctrl_link_enable(ctrl, 0);
 993         edp_ctrl_phy_aux_enable(ctrl, 0);
 994         ctrl->power_on = false;
 995 unlock_ret:
 996         mutex_unlock(&ctrl->dev_mutex);
 997 }
 998
 999 static void edp_ctrl_off_worker(struct work_struct *work)
1000 {
1001         struct edp_ctrl *ctrl = container_of(
1002                                 work, struct edp_ctrl, off_work);
1003         unsigned long time_left;
1004
1005         mutex_lock(&ctrl->dev_mutex);
1006
1007         if (!ctrl->power_on) {
1008                 DBG("already off");
1009                 goto unlock_ret;
1010         }
1011
1012         reinit_completion(&ctrl->idle_comp);
1013         edp_state_ctrl(ctrl, EDP_STATE_CTRL_PUSH_IDLE);
1014
1015         time_left = wait_for_completion_timeout(&ctrl->idle_comp,
1016                                                 msecs_to_jiffies(500));
1017         if (!time_left)
1018                 DBG("%s: idle pattern timedout\n", __func__);
1019
1020         edp_state_ctrl(ctrl, 0);
1021
1022         drm_dp_link_power_down(ctrl->drm_aux, &ctrl->dp_link);
1023
1024         edp_ctrl_irq_enable(ctrl, 0);
1025
1026         edp_ctrl_link_enable(ctrl, 0);
1027
1028         edp_ctrl_phy_aux_enable(ctrl, 0);
1029
1030         ctrl->power_on = false;
1031
1032 unlock_ret:
1033         mutex_unlock(&ctrl->dev_mutex);
1034 }
1035
1036 irqreturn_t msm_edp_ctrl_irq(struct edp_ctrl *ctrl)
1037 {
1038         u32 isr1, isr2, mask1, mask2;
1039         u32 ack;
1040
1041         DBG("");
1042         spin_lock(&ctrl->irq_lock);
1043         isr1 = edp_read(ctrl->base + REG_EDP_INTERRUPT_REG_1);
1044         isr2 = edp_read(ctrl->base + REG_EDP_INTERRUPT_REG_2);
1045
1046         mask1 = isr1 & EDP_INTR_MASK1;
1047         mask2 = isr2 & EDP_INTR_MASK2;
1048
1049         isr1 &= ~mask1; /* remove masks bit */
1050         isr2 &= ~mask2;
1051
1052         DBG("isr=%x mask=%x isr2=%x mask2=%x",
1053                         isr1, mask1, isr2, mask2);
1054
1055         ack = isr1 & EDP_INTR_STATUS1;
1056         ack <<= 1;      /* ack bits */
1057         ack |= mask1;
1058         edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_1, ack);
1059
1060         ack = isr2 & EDP_INTR_STATUS2;
1061         ack <<= 1;      /* ack bits */
1062         ack |= mask2;
1063         edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_2, ack);
1064         spin_unlock(&ctrl->irq_lock);
1065
1066         if (isr1 & EDP_INTERRUPT_REG_1_HPD)
1067                 DBG("edp_hpd");
1068
1069         if (isr2 & EDP_INTERRUPT_REG_2_READY_FOR_VIDEO)
1070                 DBG("edp_video_ready");
1071
1072         if (isr2 & EDP_INTERRUPT_REG_2_IDLE_PATTERNs_SENT) {
1073                 DBG("idle_patterns_sent");
1074                 complete(&ctrl->idle_comp);
1075         }
1076
1077         msm_edp_aux_irq(ctrl->aux, isr1);
1078
1079         return IRQ_HANDLED;
1080 }
1081
1082 void msm_edp_ctrl_power(struct edp_ctrl *ctrl, bool on)
1083 {
1084         if (on)
1085                 queue_work(ctrl->workqueue, &ctrl->on_work);
1086         else
1087                 queue_work(ctrl->workqueue, &ctrl->off_work);
1088 }
1089
1090 int msm_edp_ctrl_init(struct msm_edp *edp)
1091 {
1092         struct edp_ctrl *ctrl = NULL;
1093         struct device *dev;
1094         int ret;
1095
1096         if (!edp) {
1097                 pr_err("%s: edp is NULL!\n", __func__);
1098                 return -EINVAL;
1099         }
1100
1101         dev = &edp->pdev->dev;
1102         ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
1103         if (!ctrl)
1104                 return -ENOMEM;
1105
1106         edp->ctrl = ctrl;
1107         ctrl->pdev = edp->pdev;
1108
1109         ctrl->base = msm_ioremap(ctrl->pdev, "edp", "eDP");
1110         if (IS_ERR(ctrl->base))
1111                 return PTR_ERR(ctrl->base);
1112
1113         /* Get regulator, clock, gpio, pwm */
1114         ret = edp_regulator_init(ctrl);
1115         if (ret) {
1116                 pr_err("%s:regulator init fail\n", __func__);
1117                 return ret;
1118         }
1119         ret = edp_clk_init(ctrl);
1120         if (ret) {
1121                 pr_err("%s:clk init fail\n", __func__);
1122                 return ret;
1123         }
1124         ret = edp_gpio_config(ctrl);
1125         if (ret) {
1126                 pr_err("%s:failed to configure GPIOs: %d", __func__, ret);
1127                 return ret;
1128         }
1129
1130         /* Init aux and phy */
1131         ctrl->aux = msm_edp_aux_init(dev, ctrl->base, &ctrl->drm_aux);
1132         if (!ctrl->aux || !ctrl->drm_aux) {
1133                 pr_err("%s:failed to init aux\n", __func__);
1134                 return -ENOMEM;
1135         }
1136
1137         ctrl->phy = msm_edp_phy_init(dev, ctrl->base);
1138         if (!ctrl->phy) {
1139                 pr_err("%s:failed to init phy\n", __func__);
1140                 ret = -ENOMEM;
1141                 goto err_destory_aux;
1142         }
1143
1144         spin_lock_init(&ctrl->irq_lock);
1145         mutex_init(&ctrl->dev_mutex);
1146         init_completion(&ctrl->idle_comp);
1147
1148         /* setup workqueue */
1149         ctrl->workqueue = alloc_ordered_workqueue("edp_drm_work", 0);
1150         INIT_WORK(&ctrl->on_work, edp_ctrl_on_worker);
1151         INIT_WORK(&ctrl->off_work, edp_ctrl_off_worker);
1152
1153         return 0;
1154
1155 err_destory_aux:
1156         msm_edp_aux_destroy(dev, ctrl->aux);
1157         ctrl->aux = NULL;
1158         return ret;
1159 }
1160
1161 void msm_edp_ctrl_destroy(struct edp_ctrl *ctrl)
1162 {
1163         if (!ctrl)
1164                 return;
1165
1166         if (ctrl->workqueue) {
1167                 flush_workqueue(ctrl->workqueue);
1168                 destroy_workqueue(ctrl->workqueue);
1169                 ctrl->workqueue = NULL;
1170         }
1171
1172         if (ctrl->aux) {
1173                 msm_edp_aux_destroy(&ctrl->pdev->dev, ctrl->aux);
1174                 ctrl->aux = NULL;
1175         }
1176
1177         kfree(ctrl->edid);
1178         ctrl->edid = NULL;
1179
1180         mutex_destroy(&ctrl->dev_mutex);
1181 }
1182
1183 bool msm_edp_ctrl_panel_connected(struct edp_ctrl *ctrl)
1184 {
1185         mutex_lock(&ctrl->dev_mutex);
1186         DBG("connect status = %d", ctrl->edp_connected);
1187         if (ctrl->edp_connected) {
1188                 mutex_unlock(&ctrl->dev_mutex);
1189                 return true;
1190         }
1191
1192         if (!ctrl->power_on) {
1193                 edp_ctrl_phy_aux_enable(ctrl, 1);
1194                 edp_ctrl_irq_enable(ctrl, 1);
1195         }
1196
1197         if (drm_dp_dpcd_read(ctrl->drm_aux, DP_DPCD_REV, ctrl->dpcd,
1198                                 DP_RECEIVER_CAP_SIZE) < DP_RECEIVER_CAP_SIZE) {
1199                 pr_err("%s: AUX channel is NOT ready\n", __func__);
1200                 memset(ctrl->dpcd, 0, DP_RECEIVER_CAP_SIZE);
1201         } else {
1202                 ctrl->edp_connected = true;
1203         }
1204
1205         if (!ctrl->power_on) {
1206                 edp_ctrl_irq_enable(ctrl, 0);
1207                 edp_ctrl_phy_aux_enable(ctrl, 0);
1208         }
1209
1210         DBG("exit: connect status=%d", ctrl->edp_connected);
1211
1212         mutex_unlock(&ctrl->dev_mutex);
1213
1214         return ctrl->edp_connected;
1215 }
1216
1217 int msm_edp_ctrl_get_panel_info(struct edp_ctrl *ctrl,
1218                 struct drm_connector *connector, struct edid **edid)
1219 {
1220         int ret = 0;
1221
1222         mutex_lock(&ctrl->dev_mutex);
1223
1224         if (ctrl->edid) {
1225                 if (edid) {
1226                         DBG("Just return edid buffer");
1227                         *edid = ctrl->edid;
1228                 }
1229                 goto unlock_ret;
1230         }
1231
1232         if (!ctrl->power_on) {
1233                 edp_ctrl_phy_aux_enable(ctrl, 1);
1234                 edp_ctrl_irq_enable(ctrl, 1);
1235         }
1236
1237         ret = drm_dp_link_probe(ctrl->drm_aux, &ctrl->dp_link);
1238         if (ret) {
1239                 pr_err("%s: read dpcd cap failed, %d\n", __func__, ret);
1240                 goto disable_ret;
1241         }
1242
1243         /* Initialize link rate as panel max link rate */
1244         ctrl->link_rate = drm_dp_link_rate_to_bw_code(ctrl->dp_link.rate);
1245
1246         ctrl->edid = drm_get_edid(connector, &ctrl->drm_aux->ddc);
1247         if (!ctrl->edid) {
1248                 pr_err("%s: edid read fail\n", __func__);
1249                 goto disable_ret;
1250         }
1251
1252         if (edid)
1253                 *edid = ctrl->edid;
1254
1255 disable_ret:
1256         if (!ctrl->power_on) {
1257                 edp_ctrl_irq_enable(ctrl, 0);
1258                 edp_ctrl_phy_aux_enable(ctrl, 0);
1259         }
1260 unlock_ret:
1261         mutex_unlock(&ctrl->dev_mutex);
1262         return ret;
1263 }
1264
1265 int msm_edp_ctrl_timing_cfg(struct edp_ctrl *ctrl,
1266                                 const struct drm_display_mode *mode,
1267                                 const struct drm_display_info *info)
1268 {
1269         u32 hstart_from_sync, vstart_from_sync;
1270         u32 data;
1271         int ret = 0;
1272
1273         mutex_lock(&ctrl->dev_mutex);
1274         /*
1275          * Need to keep color depth, pixel rate and
1276          * interlaced information in ctrl context
1277          */
1278         ctrl->color_depth = info->bpc;
1279         ctrl->pixel_rate = mode->clock;
1280         ctrl->interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
1281
1282         /* Fill initial link config based on passed in timing */
1283         edp_fill_link_cfg(ctrl);
1284
1285         if (edp_clk_enable(ctrl, EDP_CLK_MASK_AHB)) {
1286                 pr_err("%s, fail to prepare enable ahb clk\n", __func__);
1287                 ret = -EINVAL;
1288                 goto unlock_ret;
1289         }
1290         edp_clock_synchrous(ctrl, 1);
1291
1292         /* Configure eDP timing to HW */
1293         edp_write(ctrl->base + REG_EDP_TOTAL_HOR_VER,
1294                 EDP_TOTAL_HOR_VER_HORIZ(mode->htotal) |
1295                 EDP_TOTAL_HOR_VER_VERT(mode->vtotal));
1296
1297         vstart_from_sync = mode->vtotal - mode->vsync_start;
1298         hstart_from_sync = mode->htotal - mode->hsync_start;
1299         edp_write(ctrl->base + REG_EDP_START_HOR_VER_FROM_SYNC,
1300                 EDP_START_HOR_VER_FROM_SYNC_HORIZ(hstart_from_sync) |
1301                 EDP_START_HOR_VER_FROM_SYNC_VERT(vstart_from_sync));
1302
1303         data = EDP_HSYNC_VSYNC_WIDTH_POLARITY_VERT(
1304                         mode->vsync_end - mode->vsync_start);
1305         data |= EDP_HSYNC_VSYNC_WIDTH_POLARITY_HORIZ(
1306                         mode->hsync_end - mode->hsync_start);
1307         if (mode->flags & DRM_MODE_FLAG_NVSYNC)
1308                 data |= EDP_HSYNC_VSYNC_WIDTH_POLARITY_NVSYNC;
1309         if (mode->flags & DRM_MODE_FLAG_NHSYNC)
1310                 data |= EDP_HSYNC_VSYNC_WIDTH_POLARITY_NHSYNC;
1311         edp_write(ctrl->base + REG_EDP_HSYNC_VSYNC_WIDTH_POLARITY, data);
1312
1313         edp_write(ctrl->base + REG_EDP_ACTIVE_HOR_VER,
1314                 EDP_ACTIVE_HOR_VER_HORIZ(mode->hdisplay) |
1315                 EDP_ACTIVE_HOR_VER_VERT(mode->vdisplay));
1316
1317         edp_clk_disable(ctrl, EDP_CLK_MASK_AHB);
1318
1319 unlock_ret:
1320         mutex_unlock(&ctrl->dev_mutex);
1321         return ret;
1322 }
1323
1324 bool msm_edp_ctrl_pixel_clock_valid(struct edp_ctrl *ctrl,
1325         u32 pixel_rate, u32 *pm, u32 *pn)
1326 {
1327         const struct edp_pixel_clk_div *divs;
1328         u32 err = 1; /* 1% error tolerance */
1329         u32 clk_err;
1330         int i;
1331
1332         if (ctrl->link_rate == DP_LINK_BW_1_62) {
1333                 divs = clk_divs[0];
1334         } else if (ctrl->link_rate == DP_LINK_BW_2_7) {
1335                 divs = clk_divs[1];
1336         } else {
1337                 pr_err("%s: Invalid link rate,%d\n", __func__, ctrl->link_rate);
1338                 return false;
1339         }
1340
1341         for (i = 0; i < EDP_PIXEL_CLK_NUM; i++) {
1342                 clk_err = abs(divs[i].rate - pixel_rate);
1343                 if ((divs[i].rate * err / 100) >= clk_err) {
1344                         if (pm)
1345                                 *pm = divs[i].m;
1346                         if (pn)
1347                                 *pn = divs[i].n;
1348                         return true;
1349                 }
1350         }
1351
1352         DBG("pixel clock %d(kHz) not supported", pixel_rate);
1353
1354         return false;
1355 }
1356