2 * Copyright (c) 2016 Intel Corporation
4 * Permission to use, copy, modify, distribute, and sell this software and its
5 * documentation for any purpose is hereby granted without fee, provided that
6 * the above copyright notice appear in all copies and that both that copyright
7 * notice and this permission notice appear in supporting documentation, and
8 * that the name of the copyright holders not be used in advertising or
9 * publicity pertaining to distribution of the software without specific,
10 * written prior permission. The copyright holders make no representations
11 * about the suitability of this software for any purpose. It is provided "as
12 * is" without express or implied warranty.
14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
24 #include <drm/drm_connector.h>
25 #include <drm/drm_edid.h>
27 #include "drm_crtc_internal.h"
28 #include "drm_internal.h"
33 * In DRM connectors are the general abstraction for display sinks, and include
34 * als fixed panels or anything else that can display pixels in some form. As
35 * opposed to all other KMS objects representing hardware (like CRTC, encoder or
36 * plane abstractions) connectors can be hotplugged and unplugged at runtime.
37 * Hence they are reference-counted using drm_connector_reference() and
38 * drm_connector_unreference().
40 * KMS driver must create, initialize, register and attach at a struct
41 * &drm_connector for each such sink. The instance is created as other KMS
42 * objects and initialized by setting the following fields.
44 * The connector is then registered with a call to drm_connector_init() with a
45 * pointer to the connector functions and a connector type, and exposed through
46 * sysfs with a call to drm_connector_register().
48 * Connectors must be attached to an encoder to be used. For devices that map
49 * connectors to encoders 1:1, the connector should be attached at
50 * initialization time with a call to drm_mode_connector_attach_encoder(). The
51 * driver must also set the struct &drm_connector encoder field to point to the
54 * For connectors which are not fixed (like built-in panels) the driver needs to
55 * support hotplug notifications. The simplest way to do that is by using the
56 * probe helpers, see drm_kms_helper_poll_init() for connectors which don't have
57 * hardware support for hotplug interrupts. Connectors with hardware hotplug
58 * support can instead use e.g. drm_helper_hpd_irq_event().
61 struct drm_conn_prop_enum_list {
68 * Connector and encoder types.
70 static struct drm_conn_prop_enum_list drm_connector_enum_list[] = {
71 { DRM_MODE_CONNECTOR_Unknown, "Unknown" },
72 { DRM_MODE_CONNECTOR_VGA, "VGA" },
73 { DRM_MODE_CONNECTOR_DVII, "DVI-I" },
74 { DRM_MODE_CONNECTOR_DVID, "DVI-D" },
75 { DRM_MODE_CONNECTOR_DVIA, "DVI-A" },
76 { DRM_MODE_CONNECTOR_Composite, "Composite" },
77 { DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO" },
78 { DRM_MODE_CONNECTOR_LVDS, "LVDS" },
79 { DRM_MODE_CONNECTOR_Component, "Component" },
80 { DRM_MODE_CONNECTOR_9PinDIN, "DIN" },
81 { DRM_MODE_CONNECTOR_DisplayPort, "DP" },
82 { DRM_MODE_CONNECTOR_HDMIA, "HDMI-A" },
83 { DRM_MODE_CONNECTOR_HDMIB, "HDMI-B" },
84 { DRM_MODE_CONNECTOR_TV, "TV" },
85 { DRM_MODE_CONNECTOR_eDP, "eDP" },
86 { DRM_MODE_CONNECTOR_VIRTUAL, "Virtual" },
87 { DRM_MODE_CONNECTOR_DSI, "DSI" },
88 { DRM_MODE_CONNECTOR_DPI, "DPI" },
91 void drm_connector_ida_init(void)
95 for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
96 ida_init(&drm_connector_enum_list[i].ida);
99 void drm_connector_ida_destroy(void)
103 for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
104 ida_destroy(&drm_connector_enum_list[i].ida);
108 * drm_connector_get_cmdline_mode - reads the user's cmdline mode
109 * @connector: connector to quwery
111 * The kernel supports per-connector configuration of its consoles through
112 * use of the video= parameter. This function parses that option and
113 * extracts the user's specified mode (or enable/disable status) for a
114 * particular connector. This is typically only used during the early fbdev
117 static void drm_connector_get_cmdline_mode(struct drm_connector *connector)
119 struct drm_cmdline_mode *mode = &connector->cmdline_mode;
122 if (fb_get_options(connector->name, &option))
125 if (!drm_mode_parse_command_line_for_connector(option,
133 switch (mode->force) {
137 case DRM_FORCE_ON_DIGITAL:
146 DRM_INFO("forcing %s connector %s\n", connector->name, s);
147 connector->force = mode->force;
150 DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n",
152 mode->xres, mode->yres,
153 mode->refresh_specified ? mode->refresh : 60,
154 mode->rb ? " reduced blanking" : "",
155 mode->margins ? " with margins" : "",
156 mode->interlace ? " interlaced" : "");
159 static void drm_connector_free(struct kref *kref)
161 struct drm_connector *connector =
162 container_of(kref, struct drm_connector, base.refcount);
163 struct drm_device *dev = connector->dev;
165 drm_mode_object_unregister(dev, &connector->base);
166 connector->funcs->destroy(connector);
170 * drm_connector_init - Init a preallocated connector
172 * @connector: the connector to init
173 * @funcs: callbacks for this connector
174 * @connector_type: user visible type of the connector
176 * Initialises a preallocated connector. Connectors should be
177 * subclassed as part of driver connector objects.
180 * Zero on success, error code on failure.
182 int drm_connector_init(struct drm_device *dev,
183 struct drm_connector *connector,
184 const struct drm_connector_funcs *funcs,
187 struct drm_mode_config *config = &dev->mode_config;
189 struct ida *connector_ida =
190 &drm_connector_enum_list[connector_type].ida;
192 drm_modeset_lock_all(dev);
194 ret = drm_mode_object_get_reg(dev, &connector->base,
195 DRM_MODE_OBJECT_CONNECTOR,
196 false, drm_connector_free);
200 connector->base.properties = &connector->properties;
201 connector->dev = dev;
202 connector->funcs = funcs;
204 ret = ida_simple_get(&config->connector_ida, 0, 0, GFP_KERNEL);
207 connector->index = ret;
210 connector->connector_type = connector_type;
211 connector->connector_type_id =
212 ida_simple_get(connector_ida, 1, 0, GFP_KERNEL);
213 if (connector->connector_type_id < 0) {
214 ret = connector->connector_type_id;
218 kasprintf(GFP_KERNEL, "%s-%d",
219 drm_connector_enum_list[connector_type].name,
220 connector->connector_type_id);
221 if (!connector->name) {
223 goto out_put_type_id;
226 INIT_LIST_HEAD(&connector->probed_modes);
227 INIT_LIST_HEAD(&connector->modes);
228 mutex_init(&connector->mutex);
229 connector->edid_blob_ptr = NULL;
230 connector->status = connector_status_unknown;
232 drm_connector_get_cmdline_mode(connector);
234 /* We should add connectors at the end to avoid upsetting the connector
236 list_add_tail(&connector->head, &config->connector_list);
237 config->num_connector++;
239 if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL)
240 drm_object_attach_property(&connector->base,
241 config->edid_property,
244 drm_object_attach_property(&connector->base,
245 config->dpms_property, 0);
247 if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
248 drm_object_attach_property(&connector->base, config->prop_crtc_id, 0);
251 connector->debugfs_entry = NULL;
254 ida_simple_remove(connector_ida, connector->connector_type_id);
257 ida_simple_remove(&config->connector_ida, connector->index);
260 drm_mode_object_unregister(dev, &connector->base);
263 drm_modeset_unlock_all(dev);
267 EXPORT_SYMBOL(drm_connector_init);
270 * drm_mode_connector_attach_encoder - attach a connector to an encoder
271 * @connector: connector to attach
272 * @encoder: encoder to attach @connector to
274 * This function links up a connector to an encoder. Note that the routing
275 * restrictions between encoders and crtcs are exposed to userspace through the
276 * possible_clones and possible_crtcs bitmasks.
279 * Zero on success, negative errno on failure.
281 int drm_mode_connector_attach_encoder(struct drm_connector *connector,
282 struct drm_encoder *encoder)
287 * In the past, drivers have attempted to model the static association
288 * of connector to encoder in simple connector/encoder devices using a
289 * direct assignment of connector->encoder = encoder. This connection
290 * is a logical one and the responsibility of the core, so drivers are
291 * expected not to mess with this.
293 * Note that the error return should've been enough here, but a large
294 * majority of drivers ignores the return value, so add in a big WARN
295 * to get people's attention.
297 if (WARN_ON(connector->encoder))
300 for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
301 if (connector->encoder_ids[i] == 0) {
302 connector->encoder_ids[i] = encoder->base.id;
308 EXPORT_SYMBOL(drm_mode_connector_attach_encoder);
310 static void drm_mode_remove(struct drm_connector *connector,
311 struct drm_display_mode *mode)
313 list_del(&mode->head);
314 drm_mode_destroy(connector->dev, mode);
318 * drm_connector_cleanup - cleans up an initialised connector
319 * @connector: connector to cleanup
321 * Cleans up the connector but doesn't free the object.
323 void drm_connector_cleanup(struct drm_connector *connector)
325 struct drm_device *dev = connector->dev;
326 struct drm_display_mode *mode, *t;
328 /* The connector should have been removed from userspace long before
329 * it is finally destroyed.
331 if (WARN_ON(connector->registered))
332 drm_connector_unregister(connector);
334 if (connector->tile_group) {
335 drm_mode_put_tile_group(dev, connector->tile_group);
336 connector->tile_group = NULL;
339 list_for_each_entry_safe(mode, t, &connector->probed_modes, head)
340 drm_mode_remove(connector, mode);
342 list_for_each_entry_safe(mode, t, &connector->modes, head)
343 drm_mode_remove(connector, mode);
345 ida_simple_remove(&drm_connector_enum_list[connector->connector_type].ida,
346 connector->connector_type_id);
348 ida_simple_remove(&dev->mode_config.connector_ida,
351 kfree(connector->display_info.bus_formats);
352 drm_mode_object_unregister(dev, &connector->base);
353 kfree(connector->name);
354 connector->name = NULL;
355 list_del(&connector->head);
356 dev->mode_config.num_connector--;
358 WARN_ON(connector->state && !connector->funcs->atomic_destroy_state);
359 if (connector->state && connector->funcs->atomic_destroy_state)
360 connector->funcs->atomic_destroy_state(connector,
363 mutex_destroy(&connector->mutex);
365 memset(connector, 0, sizeof(*connector));
367 EXPORT_SYMBOL(drm_connector_cleanup);
370 * drm_connector_register - register a connector
371 * @connector: the connector to register
373 * Register userspace interfaces for a connector
376 * Zero on success, error code on failure.
378 int drm_connector_register(struct drm_connector *connector)
382 if (!connector->dev->registered)
385 mutex_lock(&connector->mutex);
386 if (connector->registered)
389 ret = drm_sysfs_connector_add(connector);
393 ret = drm_debugfs_connector_add(connector);
398 if (connector->funcs->late_register) {
399 ret = connector->funcs->late_register(connector);
404 drm_mode_object_register(connector->dev, &connector->base);
406 connector->registered = true;
410 drm_debugfs_connector_remove(connector);
412 drm_sysfs_connector_remove(connector);
414 mutex_unlock(&connector->mutex);
417 EXPORT_SYMBOL(drm_connector_register);
420 * drm_connector_unregister - unregister a connector
421 * @connector: the connector to unregister
423 * Unregister userspace interfaces for a connector
425 void drm_connector_unregister(struct drm_connector *connector)
427 mutex_lock(&connector->mutex);
428 if (!connector->registered) {
429 mutex_unlock(&connector->mutex);
433 if (connector->funcs->early_unregister)
434 connector->funcs->early_unregister(connector);
436 drm_sysfs_connector_remove(connector);
437 drm_debugfs_connector_remove(connector);
439 connector->registered = false;
440 mutex_unlock(&connector->mutex);
442 EXPORT_SYMBOL(drm_connector_unregister);
444 void drm_connector_unregister_all(struct drm_device *dev)
446 struct drm_connector *connector;
448 /* FIXME: taking the mode config mutex ends up in a clash with sysfs */
449 list_for_each_entry(connector, &dev->mode_config.connector_list, head)
450 drm_connector_unregister(connector);
453 int drm_connector_register_all(struct drm_device *dev)
455 struct drm_connector *connector;
458 /* FIXME: taking the mode config mutex ends up in a clash with
459 * fbcon/backlight registration */
460 list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
461 ret = drm_connector_register(connector);
469 mutex_unlock(&dev->mode_config.mutex);
470 drm_connector_unregister_all(dev);
475 * drm_get_connector_status_name - return a string for connector status
476 * @status: connector status to compute name of
478 * In contrast to the other drm_get_*_name functions this one here returns a
479 * const pointer and hence is threadsafe.
481 const char *drm_get_connector_status_name(enum drm_connector_status status)
483 if (status == connector_status_connected)
485 else if (status == connector_status_disconnected)
486 return "disconnected";
490 EXPORT_SYMBOL(drm_get_connector_status_name);
492 static const struct drm_prop_enum_list drm_subpixel_enum_list[] = {
493 { SubPixelUnknown, "Unknown" },
494 { SubPixelHorizontalRGB, "Horizontal RGB" },
495 { SubPixelHorizontalBGR, "Horizontal BGR" },
496 { SubPixelVerticalRGB, "Vertical RGB" },
497 { SubPixelVerticalBGR, "Vertical BGR" },
498 { SubPixelNone, "None" },
502 * drm_get_subpixel_order_name - return a string for a given subpixel enum
503 * @order: enum of subpixel_order
505 * Note you could abuse this and return something out of bounds, but that
506 * would be a caller error. No unscrubbed user data should make it here.
508 const char *drm_get_subpixel_order_name(enum subpixel_order order)
510 return drm_subpixel_enum_list[order].name;
512 EXPORT_SYMBOL(drm_get_subpixel_order_name);
514 static const struct drm_prop_enum_list drm_dpms_enum_list[] = {
515 { DRM_MODE_DPMS_ON, "On" },
516 { DRM_MODE_DPMS_STANDBY, "Standby" },
517 { DRM_MODE_DPMS_SUSPEND, "Suspend" },
518 { DRM_MODE_DPMS_OFF, "Off" }
520 DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list)
523 * drm_display_info_set_bus_formats - set the supported bus formats
524 * @info: display info to store bus formats in
525 * @formats: array containing the supported bus formats
526 * @num_formats: the number of entries in the fmts array
528 * Store the supported bus formats in display info structure.
529 * See MEDIA_BUS_FMT_* definitions in include/uapi/linux/media-bus-format.h for
530 * a full list of available formats.
532 int drm_display_info_set_bus_formats(struct drm_display_info *info,
534 unsigned int num_formats)
538 if (!formats && num_formats)
541 if (formats && num_formats) {
542 fmts = kmemdup(formats, sizeof(*formats) * num_formats,
548 kfree(info->bus_formats);
549 info->bus_formats = fmts;
550 info->num_bus_formats = num_formats;
554 EXPORT_SYMBOL(drm_display_info_set_bus_formats);
556 /* Optional connector properties. */
557 static const struct drm_prop_enum_list drm_scaling_mode_enum_list[] = {
558 { DRM_MODE_SCALE_NONE, "None" },
559 { DRM_MODE_SCALE_FULLSCREEN, "Full" },
560 { DRM_MODE_SCALE_CENTER, "Center" },
561 { DRM_MODE_SCALE_ASPECT, "Full aspect" },
564 static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = {
565 { DRM_MODE_PICTURE_ASPECT_NONE, "Automatic" },
566 { DRM_MODE_PICTURE_ASPECT_4_3, "4:3" },
567 { DRM_MODE_PICTURE_ASPECT_16_9, "16:9" },
570 static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = {
571 { DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
572 { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */
573 { DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */
575 DRM_ENUM_NAME_FN(drm_get_dvi_i_select_name, drm_dvi_i_select_enum_list)
577 static const struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] = {
578 { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I and TV-out */
579 { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */
580 { DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */
582 DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
583 drm_dvi_i_subconnector_enum_list)
585 static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
586 { DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
587 { DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
588 { DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */
589 { DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
590 { DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */
592 DRM_ENUM_NAME_FN(drm_get_tv_select_name, drm_tv_select_enum_list)
594 static const struct drm_prop_enum_list drm_tv_subconnector_enum_list[] = {
595 { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I and TV-out */
596 { DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
597 { DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */
598 { DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
599 { DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */
601 DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
602 drm_tv_subconnector_enum_list)
604 int drm_connector_create_standard_properties(struct drm_device *dev)
606 struct drm_property *prop;
608 prop = drm_property_create(dev, DRM_MODE_PROP_BLOB |
609 DRM_MODE_PROP_IMMUTABLE,
613 dev->mode_config.edid_property = prop;
615 prop = drm_property_create_enum(dev, 0,
616 "DPMS", drm_dpms_enum_list,
617 ARRAY_SIZE(drm_dpms_enum_list));
620 dev->mode_config.dpms_property = prop;
622 prop = drm_property_create(dev,
624 DRM_MODE_PROP_IMMUTABLE,
628 dev->mode_config.path_property = prop;
630 prop = drm_property_create(dev,
632 DRM_MODE_PROP_IMMUTABLE,
636 dev->mode_config.tile_property = prop;
642 * drm_mode_create_dvi_i_properties - create DVI-I specific connector properties
645 * Called by a driver the first time a DVI-I connector is made.
647 int drm_mode_create_dvi_i_properties(struct drm_device *dev)
649 struct drm_property *dvi_i_selector;
650 struct drm_property *dvi_i_subconnector;
652 if (dev->mode_config.dvi_i_select_subconnector_property)
656 drm_property_create_enum(dev, 0,
657 "select subconnector",
658 drm_dvi_i_select_enum_list,
659 ARRAY_SIZE(drm_dvi_i_select_enum_list));
660 dev->mode_config.dvi_i_select_subconnector_property = dvi_i_selector;
662 dvi_i_subconnector = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
664 drm_dvi_i_subconnector_enum_list,
665 ARRAY_SIZE(drm_dvi_i_subconnector_enum_list));
666 dev->mode_config.dvi_i_subconnector_property = dvi_i_subconnector;
670 EXPORT_SYMBOL(drm_mode_create_dvi_i_properties);
673 * drm_create_tv_properties - create TV specific connector properties
675 * @num_modes: number of different TV formats (modes) supported
676 * @modes: array of pointers to strings containing name of each format
678 * Called by a driver's TV initialization routine, this function creates
679 * the TV specific connector properties for a given device. Caller is
680 * responsible for allocating a list of format names and passing them to
683 int drm_mode_create_tv_properties(struct drm_device *dev,
684 unsigned int num_modes,
685 const char * const modes[])
687 struct drm_property *tv_selector;
688 struct drm_property *tv_subconnector;
691 if (dev->mode_config.tv_select_subconnector_property)
695 * Basic connector properties
697 tv_selector = drm_property_create_enum(dev, 0,
698 "select subconnector",
699 drm_tv_select_enum_list,
700 ARRAY_SIZE(drm_tv_select_enum_list));
704 dev->mode_config.tv_select_subconnector_property = tv_selector;
707 drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
709 drm_tv_subconnector_enum_list,
710 ARRAY_SIZE(drm_tv_subconnector_enum_list));
711 if (!tv_subconnector)
713 dev->mode_config.tv_subconnector_property = tv_subconnector;
716 * Other, TV specific properties: margins & TV modes.
718 dev->mode_config.tv_left_margin_property =
719 drm_property_create_range(dev, 0, "left margin", 0, 100);
720 if (!dev->mode_config.tv_left_margin_property)
723 dev->mode_config.tv_right_margin_property =
724 drm_property_create_range(dev, 0, "right margin", 0, 100);
725 if (!dev->mode_config.tv_right_margin_property)
728 dev->mode_config.tv_top_margin_property =
729 drm_property_create_range(dev, 0, "top margin", 0, 100);
730 if (!dev->mode_config.tv_top_margin_property)
733 dev->mode_config.tv_bottom_margin_property =
734 drm_property_create_range(dev, 0, "bottom margin", 0, 100);
735 if (!dev->mode_config.tv_bottom_margin_property)
738 dev->mode_config.tv_mode_property =
739 drm_property_create(dev, DRM_MODE_PROP_ENUM,
741 if (!dev->mode_config.tv_mode_property)
744 for (i = 0; i < num_modes; i++)
745 drm_property_add_enum(dev->mode_config.tv_mode_property, i,
748 dev->mode_config.tv_brightness_property =
749 drm_property_create_range(dev, 0, "brightness", 0, 100);
750 if (!dev->mode_config.tv_brightness_property)
753 dev->mode_config.tv_contrast_property =
754 drm_property_create_range(dev, 0, "contrast", 0, 100);
755 if (!dev->mode_config.tv_contrast_property)
758 dev->mode_config.tv_flicker_reduction_property =
759 drm_property_create_range(dev, 0, "flicker reduction", 0, 100);
760 if (!dev->mode_config.tv_flicker_reduction_property)
763 dev->mode_config.tv_overscan_property =
764 drm_property_create_range(dev, 0, "overscan", 0, 100);
765 if (!dev->mode_config.tv_overscan_property)
768 dev->mode_config.tv_saturation_property =
769 drm_property_create_range(dev, 0, "saturation", 0, 100);
770 if (!dev->mode_config.tv_saturation_property)
773 dev->mode_config.tv_hue_property =
774 drm_property_create_range(dev, 0, "hue", 0, 100);
775 if (!dev->mode_config.tv_hue_property)
782 EXPORT_SYMBOL(drm_mode_create_tv_properties);
785 * drm_mode_create_scaling_mode_property - create scaling mode property
788 * Called by a driver the first time it's needed, must be attached to desired
791 int drm_mode_create_scaling_mode_property(struct drm_device *dev)
793 struct drm_property *scaling_mode;
795 if (dev->mode_config.scaling_mode_property)
799 drm_property_create_enum(dev, 0, "scaling mode",
800 drm_scaling_mode_enum_list,
801 ARRAY_SIZE(drm_scaling_mode_enum_list));
803 dev->mode_config.scaling_mode_property = scaling_mode;
807 EXPORT_SYMBOL(drm_mode_create_scaling_mode_property);
810 * drm_mode_create_aspect_ratio_property - create aspect ratio property
813 * Called by a driver the first time it's needed, must be attached to desired
817 * Zero on success, negative errno on failure.
819 int drm_mode_create_aspect_ratio_property(struct drm_device *dev)
821 if (dev->mode_config.aspect_ratio_property)
824 dev->mode_config.aspect_ratio_property =
825 drm_property_create_enum(dev, 0, "aspect ratio",
826 drm_aspect_ratio_enum_list,
827 ARRAY_SIZE(drm_aspect_ratio_enum_list));
829 if (dev->mode_config.aspect_ratio_property == NULL)
834 EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property);
837 * drm_mode_create_suggested_offset_properties - create suggests offset properties
840 * Create the the suggested x/y offset property for connectors.
842 int drm_mode_create_suggested_offset_properties(struct drm_device *dev)
844 if (dev->mode_config.suggested_x_property && dev->mode_config.suggested_y_property)
847 dev->mode_config.suggested_x_property =
848 drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested X", 0, 0xffffffff);
850 dev->mode_config.suggested_y_property =
851 drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested Y", 0, 0xffffffff);
853 if (dev->mode_config.suggested_x_property == NULL ||
854 dev->mode_config.suggested_y_property == NULL)
858 EXPORT_SYMBOL(drm_mode_create_suggested_offset_properties);
861 * drm_mode_connector_set_path_property - set tile property on connector
862 * @connector: connector to set property on.
863 * @path: path to use for property; must not be NULL.
865 * This creates a property to expose to userspace to specify a
866 * connector path. This is mainly used for DisplayPort MST where
867 * connectors have a topology and we want to allow userspace to give
868 * them more meaningful names.
871 * Zero on success, negative errno on failure.
873 int drm_mode_connector_set_path_property(struct drm_connector *connector,
876 struct drm_device *dev = connector->dev;
879 ret = drm_property_replace_global_blob(dev,
880 &connector->path_blob_ptr,
884 dev->mode_config.path_property);
887 EXPORT_SYMBOL(drm_mode_connector_set_path_property);
890 * drm_mode_connector_set_tile_property - set tile property on connector
891 * @connector: connector to set property on.
893 * This looks up the tile information for a connector, and creates a
894 * property for userspace to parse if it exists. The property is of
895 * the form of 8 integers using ':' as a separator.
898 * Zero on success, errno on failure.
900 int drm_mode_connector_set_tile_property(struct drm_connector *connector)
902 struct drm_device *dev = connector->dev;
906 if (!connector->has_tile) {
907 ret = drm_property_replace_global_blob(dev,
908 &connector->tile_blob_ptr,
912 dev->mode_config.tile_property);
916 snprintf(tile, 256, "%d:%d:%d:%d:%d:%d:%d:%d",
917 connector->tile_group->id, connector->tile_is_single_monitor,
918 connector->num_h_tile, connector->num_v_tile,
919 connector->tile_h_loc, connector->tile_v_loc,
920 connector->tile_h_size, connector->tile_v_size);
922 ret = drm_property_replace_global_blob(dev,
923 &connector->tile_blob_ptr,
927 dev->mode_config.tile_property);
930 EXPORT_SYMBOL(drm_mode_connector_set_tile_property);
933 * drm_mode_connector_update_edid_property - update the edid property of a connector
934 * @connector: drm connector
935 * @edid: new value of the edid property
937 * This function creates a new blob modeset object and assigns its id to the
938 * connector's edid property.
941 * Zero on success, negative errno on failure.
943 int drm_mode_connector_update_edid_property(struct drm_connector *connector,
944 const struct edid *edid)
946 struct drm_device *dev = connector->dev;
950 /* ignore requests to set edid when overridden */
951 if (connector->override_edid)
955 size = EDID_LENGTH * (1 + edid->extensions);
957 ret = drm_property_replace_global_blob(dev,
958 &connector->edid_blob_ptr,
962 dev->mode_config.edid_property);
965 EXPORT_SYMBOL(drm_mode_connector_update_edid_property);
967 int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
968 struct drm_property *property,
972 struct drm_connector *connector = obj_to_connector(obj);
974 /* Do DPMS ourselves */
975 if (property == connector->dev->mode_config.dpms_property) {
976 ret = (*connector->funcs->dpms)(connector, (int)value);
977 } else if (connector->funcs->set_property)
978 ret = connector->funcs->set_property(connector, property, value);
980 /* store the property value if successful */
982 drm_object_property_set_value(&connector->base, property, value);
986 int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
987 void *data, struct drm_file *file_priv)
989 struct drm_mode_connector_set_property *conn_set_prop = data;
990 struct drm_mode_obj_set_property obj_set_prop = {
991 .value = conn_set_prop->value,
992 .prop_id = conn_set_prop->prop_id,
993 .obj_id = conn_set_prop->connector_id,
994 .obj_type = DRM_MODE_OBJECT_CONNECTOR
997 /* It does all the locking and checking we need */
998 return drm_mode_obj_set_property_ioctl(dev, &obj_set_prop, file_priv);
1001 static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *connector)
1003 /* For atomic drivers only state objects are synchronously updated and
1004 * protected by modeset locks, so check those first. */
1005 if (connector->state)
1006 return connector->state->best_encoder;
1007 return connector->encoder;
1010 static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode,
1011 const struct drm_file *file_priv)
1014 * If user-space hasn't configured the driver to expose the stereo 3D
1015 * modes, don't expose them.
1017 if (!file_priv->stereo_allowed && drm_mode_is_stereo(mode))
1023 int drm_mode_getconnector(struct drm_device *dev, void *data,
1024 struct drm_file *file_priv)
1026 struct drm_mode_get_connector *out_resp = data;
1027 struct drm_connector *connector;
1028 struct drm_encoder *encoder;
1029 struct drm_display_mode *mode;
1031 int encoders_count = 0;
1035 struct drm_mode_modeinfo u_mode;
1036 struct drm_mode_modeinfo __user *mode_ptr;
1037 uint32_t __user *encoder_ptr;
1039 if (!drm_core_check_feature(dev, DRIVER_MODESET))
1042 memset(&u_mode, 0, sizeof(struct drm_mode_modeinfo));
1044 mutex_lock(&dev->mode_config.mutex);
1046 connector = drm_connector_lookup(dev, out_resp->connector_id);
1052 for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++)
1053 if (connector->encoder_ids[i] != 0)
1056 if (out_resp->count_modes == 0) {
1057 connector->funcs->fill_modes(connector,
1058 dev->mode_config.max_width,
1059 dev->mode_config.max_height);
1062 /* delayed so we get modes regardless of pre-fill_modes state */
1063 list_for_each_entry(mode, &connector->modes, head)
1064 if (drm_mode_expose_to_userspace(mode, file_priv))
1067 out_resp->connector_id = connector->base.id;
1068 out_resp->connector_type = connector->connector_type;
1069 out_resp->connector_type_id = connector->connector_type_id;
1070 out_resp->mm_width = connector->display_info.width_mm;
1071 out_resp->mm_height = connector->display_info.height_mm;
1072 out_resp->subpixel = connector->display_info.subpixel_order;
1073 out_resp->connection = connector->status;
1075 drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
1076 encoder = drm_connector_get_encoder(connector);
1078 out_resp->encoder_id = encoder->base.id;
1080 out_resp->encoder_id = 0;
1083 * This ioctl is called twice, once to determine how much space is
1084 * needed, and the 2nd time to fill it.
1086 if ((out_resp->count_modes >= mode_count) && mode_count) {
1088 mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long)out_resp->modes_ptr;
1089 list_for_each_entry(mode, &connector->modes, head) {
1090 if (!drm_mode_expose_to_userspace(mode, file_priv))
1093 drm_mode_convert_to_umode(&u_mode, mode);
1094 if (copy_to_user(mode_ptr + copied,
1095 &u_mode, sizeof(u_mode))) {
1102 out_resp->count_modes = mode_count;
1104 ret = drm_mode_object_get_properties(&connector->base, file_priv->atomic,
1105 (uint32_t __user *)(unsigned long)(out_resp->props_ptr),
1106 (uint64_t __user *)(unsigned long)(out_resp->prop_values_ptr),
1107 &out_resp->count_props);
1111 if ((out_resp->count_encoders >= encoders_count) && encoders_count) {
1113 encoder_ptr = (uint32_t __user *)(unsigned long)(out_resp->encoders_ptr);
1114 for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
1115 if (connector->encoder_ids[i] != 0) {
1116 if (put_user(connector->encoder_ids[i],
1117 encoder_ptr + copied)) {
1125 out_resp->count_encoders = encoders_count;
1128 drm_modeset_unlock(&dev->mode_config.connection_mutex);
1130 drm_connector_unreference(connector);
1132 mutex_unlock(&dev->mode_config.mutex);