drivers/firmware/qcom_scm.c

   1 /*
   2  * Qualcomm SCM driver
   3  *
   4  * Copyright (c) 2010,2015, The Linux Foundation. All rights reserved.
   5  * Copyright (C) 2015 Linaro Ltd.
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 and
   9  * only version 2 as published by the Free Software Foundation.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  */
  17 #include <linux/platform_device.h>
  18 #include <linux/init.h>
  19 #include <linux/cpumask.h>
  20 #include <linux/export.h>
  21 #include <linux/dma-mapping.h>
  22 #include <linux/module.h>
  23 #include <linux/types.h>
  24 #include <linux/qcom_scm.h>
  25 #include <linux/of.h>
  26 #include <linux/of_address.h>
  27 #include <linux/of_platform.h>
  28 #include <linux/clk.h>
  29 #include <linux/reset-controller.h>
  30
  31 #include "qcom_scm.h"
  32
  33 static bool download_mode = IS_ENABLED(CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT);
  34 module_param(download_mode, bool, 0);
  35
  36 #define SCM_HAS_CORE_CLK        BIT(0)
  37 #define SCM_HAS_IFACE_CLK       BIT(1)
  38 #define SCM_HAS_BUS_CLK         BIT(2)
  39
  40 struct qcom_scm {
  41         struct device *dev;
  42         struct clk *core_clk;
  43         struct clk *iface_clk;
  44         struct clk *bus_clk;
  45         struct reset_controller_dev reset;
  46
  47         u64 dload_mode_addr;
  48 };
  49
  50 struct qcom_scm_current_perm_info {
  51         __le32 vmid;
  52         __le32 perm;
  53         __le64 ctx;
  54         __le32 ctx_size;
  55         __le32 unused;
  56 };
  57
  58 struct qcom_scm_mem_map_info {
  59         __le64 mem_addr;
  60         __le64 mem_size;
  61 };
  62
  63 static struct qcom_scm *__scm;
  64
  65 static int qcom_scm_clk_enable(void)
  66 {
  67         int ret;
  68
  69         ret = clk_prepare_enable(__scm->core_clk);
  70         if (ret)
  71                 goto bail;
  72
  73         ret = clk_prepare_enable(__scm->iface_clk);
  74         if (ret)
  75                 goto disable_core;
  76
  77         ret = clk_prepare_enable(__scm->bus_clk);
  78         if (ret)
  79                 goto disable_iface;
  80
  81         return 0;
  82
  83 disable_iface:
  84         clk_disable_unprepare(__scm->iface_clk);
  85 disable_core:
  86         clk_disable_unprepare(__scm->core_clk);
  87 bail:
  88         return ret;
  89 }
  90
  91 static void qcom_scm_clk_disable(void)
  92 {
  93         clk_disable_unprepare(__scm->core_clk);
  94         clk_disable_unprepare(__scm->iface_clk);
  95         clk_disable_unprepare(__scm->bus_clk);
  96 }
  97
  98 /**
  99  * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
 100  * @entry: Entry point function for the cpus
 101  * @cpus: The cpumask of cpus that will use the entry point
 102  *
 103  * Set the cold boot address of the cpus. Any cpu outside the supported
 104  * range would be removed from the cpu present mask.
 105  */
 106 int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
 107 {
 108         return __qcom_scm_set_cold_boot_addr(entry, cpus);
 109 }
 110 EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
 111
 112 /**
 113  * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
 114  * @entry: Entry point function for the cpus
 115  * @cpus: The cpumask of cpus that will use the entry point
 116  *
 117  * Set the Linux entry point for the SCM to transfer control to when coming
 118  * out of a power down. CPU power down may be executed on cpuidle or hotplug.
 119  */
 120 int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
 121 {
 122         return __qcom_scm_set_warm_boot_addr(__scm->dev, entry, cpus);
 123 }
 124 EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
 125
 126 /**
 127  * qcom_scm_cpu_power_down() - Power down the cpu
 128  * @flags - Flags to flush cache
 129  *
 130  * This is an end point to power down cpu. If there was a pending interrupt,
 131  * the control would return from this function, otherwise, the cpu jumps to the
 132  * warm boot entry point set for this cpu upon reset.
 133  */
 134 void qcom_scm_cpu_power_down(u32 flags)
 135 {
 136         __qcom_scm_cpu_power_down(flags);
 137 }
 138 EXPORT_SYMBOL(qcom_scm_cpu_power_down);
 139
 140 /**
 141  * qcom_scm_hdcp_available() - Check if secure environment supports HDCP.
 142  *
 143  * Return true if HDCP is supported, false if not.
 144  */
 145 bool qcom_scm_hdcp_available(void)
 146 {
 147         int ret = qcom_scm_clk_enable();
 148
 149         if (ret)
 150                 return ret;
 151
 152         ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP,
 153                                                 QCOM_SCM_CMD_HDCP);
 154
 155         qcom_scm_clk_disable();
 156
 157         return ret > 0 ? true : false;
 158 }
 159 EXPORT_SYMBOL(qcom_scm_hdcp_available);
 160
 161 /**
 162  * qcom_scm_hdcp_req() - Send HDCP request.
 163  * @req: HDCP request array
 164  * @req_cnt: HDCP request array count
 165  * @resp: response buffer passed to SCM
 166  *
 167  * Write HDCP register(s) through SCM.
 168  */
 169 int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
 170 {
 171         int ret = qcom_scm_clk_enable();
 172
 173         if (ret)
 174                 return ret;
 175
 176         ret = __qcom_scm_hdcp_req(__scm->dev, req, req_cnt, resp);
 177         qcom_scm_clk_disable();
 178         return ret;
 179 }
 180 EXPORT_SYMBOL(qcom_scm_hdcp_req);
 181
 182 /**
 183  * qcom_scm_pas_supported() - Check if the peripheral authentication service is
 184  *                            available for the given peripherial
 185  * @peripheral: peripheral id
 186  *
 187  * Returns true if PAS is supported for this peripheral, otherwise false.
 188  */
 189 bool qcom_scm_pas_supported(u32 peripheral)
 190 {
 191         int ret;
 192
 193         ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
 194                                            QCOM_SCM_PAS_IS_SUPPORTED_CMD);
 195         if (ret <= 0)
 196                 return false;
 197
 198         return __qcom_scm_pas_supported(__scm->dev, peripheral);
 199 }
 200 EXPORT_SYMBOL(qcom_scm_pas_supported);
 201
 202 /**
 203  * qcom_scm_pas_init_image() - Initialize peripheral authentication service
 204  *                             state machine for a given peripheral, using the
 205  *                             metadata
 206  * @peripheral: peripheral id
 207  * @metadata:   pointer to memory containing ELF header, program header table
 208  *              and optional blob of data used for authenticating the metadata
 209  *              and the rest of the firmware
 210  * @size:       size of the metadata
 211  *
 212  * Returns 0 on success.
 213  */
 214 int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size)
 215 {
 216         dma_addr_t mdata_phys;
 217         void *mdata_buf;
 218         int ret;
 219
 220         /*
 221          * During the scm call memory protection will be enabled for the meta
 222          * data blob, so make sure it's physically contiguous, 4K aligned and
 223          * non-cachable to avoid XPU violations.
 224          */
 225         mdata_buf = dma_alloc_coherent(__scm->dev, size, &mdata_phys,
 226                                        GFP_KERNEL);
 227         if (!mdata_buf) {
 228                 dev_err(__scm->dev, "Allocation of metadata buffer failed.\n");
 229                 return -ENOMEM;
 230         }
 231         memcpy(mdata_buf, metadata, size);
 232
 233         ret = qcom_scm_clk_enable();
 234         if (ret)
 235                 goto free_metadata;
 236
 237         ret = __qcom_scm_pas_init_image(__scm->dev, peripheral, mdata_phys);
 238
 239         qcom_scm_clk_disable();
 240
 241 free_metadata:
 242         dma_free_coherent(__scm->dev, size, mdata_buf, mdata_phys);
 243
 244         return ret;
 245 }
 246 EXPORT_SYMBOL(qcom_scm_pas_init_image);
 247
 248 /**
 249  * qcom_scm_pas_mem_setup() - Prepare the memory related to a given peripheral
 250  *                            for firmware loading
 251  * @peripheral: peripheral id
 252  * @addr:       start address of memory area to prepare
 253  * @size:       size of the memory area to prepare
 254  *
 255  * Returns 0 on success.
 256  */
 257 int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size)
 258 {
 259         int ret;
 260
 261         ret = qcom_scm_clk_enable();
 262         if (ret)
 263                 return ret;
 264
 265         ret = __qcom_scm_pas_mem_setup(__scm->dev, peripheral, addr, size);
 266         qcom_scm_clk_disable();
 267
 268         return ret;
 269 }
 270 EXPORT_SYMBOL(qcom_scm_pas_mem_setup);
 271
 272 /**
 273  * qcom_scm_pas_auth_and_reset() - Authenticate the given peripheral firmware
 274  *                                 and reset the remote processor
 275  * @peripheral: peripheral id
 276  *
 277  * Return 0 on success.
 278  */
 279 int qcom_scm_pas_auth_and_reset(u32 peripheral)
 280 {
 281         int ret;
 282
 283         ret = qcom_scm_clk_enable();
 284         if (ret)
 285                 return ret;
 286
 287         ret = __qcom_scm_pas_auth_and_reset(__scm->dev, peripheral);
 288         qcom_scm_clk_disable();
 289
 290         return ret;
 291 }
 292 EXPORT_SYMBOL(qcom_scm_pas_auth_and_reset);
 293
 294 /**
 295  * qcom_scm_pas_shutdown() - Shut down the remote processor
 296  * @peripheral: peripheral id
 297  *
 298  * Returns 0 on success.
 299  */
 300 int qcom_scm_pas_shutdown(u32 peripheral)
 301 {
 302         int ret;
 303
 304         ret = qcom_scm_clk_enable();
 305         if (ret)
 306                 return ret;
 307
 308         ret = __qcom_scm_pas_shutdown(__scm->dev, peripheral);
 309         qcom_scm_clk_disable();
 310
 311         return ret;
 312 }
 313 EXPORT_SYMBOL(qcom_scm_pas_shutdown);
 314
 315 static int qcom_scm_pas_reset_assert(struct reset_controller_dev *rcdev,
 316                                      unsigned long idx)
 317 {
 318         if (idx != 0)
 319                 return -EINVAL;
 320
 321         return __qcom_scm_pas_mss_reset(__scm->dev, 1);
 322 }
 323
 324 static int qcom_scm_pas_reset_deassert(struct reset_controller_dev *rcdev,
 325                                        unsigned long idx)
 326 {
 327         if (idx != 0)
 328                 return -EINVAL;
 329
 330         return __qcom_scm_pas_mss_reset(__scm->dev, 0);
 331 }
 332
 333 static const struct reset_control_ops qcom_scm_pas_reset_ops = {
 334         .assert = qcom_scm_pas_reset_assert,
 335         .deassert = qcom_scm_pas_reset_deassert,
 336 };
 337
 338 int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare)
 339 {
 340         return __qcom_scm_restore_sec_cfg(__scm->dev, device_id, spare);
 341 }
 342 EXPORT_SYMBOL(qcom_scm_restore_sec_cfg);
 343
 344 int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size)
 345 {
 346         return __qcom_scm_iommu_secure_ptbl_size(__scm->dev, spare, size);
 347 }
 348 EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_size);
 349
 350 int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare)
 351 {
 352         return __qcom_scm_iommu_secure_ptbl_init(__scm->dev, addr, size, spare);
 353 }
 354 EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_init);
 355
 356 int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val)
 357 {
 358         return __qcom_scm_io_readl(__scm->dev, addr, val);
 359 }
 360 EXPORT_SYMBOL(qcom_scm_io_readl);
 361
 362 int qcom_scm_io_writel(phys_addr_t addr, unsigned int val)
 363 {
 364         return __qcom_scm_io_writel(__scm->dev, addr, val);
 365 }
 366 EXPORT_SYMBOL(qcom_scm_io_writel);
 367
 368 static void qcom_scm_set_download_mode(bool enable)
 369 {
 370         bool avail;
 371         int ret = 0;
 372
 373         avail = __qcom_scm_is_call_available(__scm->dev,
 374                                              QCOM_SCM_SVC_BOOT,
 375                                              QCOM_SCM_SET_DLOAD_MODE);
 376         if (avail) {
 377                 ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
 378         } else if (__scm->dload_mode_addr) {
 379                 ret = __qcom_scm_io_writel(__scm->dev, __scm->dload_mode_addr,
 380                                            enable ? QCOM_SCM_SET_DLOAD_MODE : 0);
 381         } else {
 382                 dev_err(__scm->dev,
 383                         "No available mechanism for setting download mode\n");
 384         }
 385
 386         if (ret)
 387                 dev_err(__scm->dev, "failed to set download mode: %d\n", ret);
 388 }
 389
 390 static int qcom_scm_find_dload_address(struct device *dev, u64 *addr)
 391 {
 392         struct device_node *tcsr;
 393         struct device_node *np = dev->of_node;
 394         struct resource res;
 395         u32 offset;
 396         int ret;
 397
 398         tcsr = of_parse_phandle(np, "qcom,dload-mode", 0);
 399         if (!tcsr)
 400                 return 0;
 401
 402         ret = of_address_to_resource(tcsr, 0, &res);
 403         of_node_put(tcsr);
 404         if (ret)
 405                 return ret;
 406
 407         ret = of_property_read_u32_index(np, "qcom,dload-mode", 1, &offset);
 408         if (ret < 0)
 409                 return ret;
 410
 411         *addr = res.start + offset;
 412
 413         return 0;
 414 }
 415
 416 /**
 417  * qcom_scm_is_available() - Checks if SCM is available
 418  */
 419 bool qcom_scm_is_available(void)
 420 {
 421         return !!__scm;
 422 }
 423 EXPORT_SYMBOL(qcom_scm_is_available);
 424
 425 int qcom_scm_set_remote_state(u32 state, u32 id)
 426 {
 427         return __qcom_scm_set_remote_state(__scm->dev, state, id);
 428 }
 429 EXPORT_SYMBOL(qcom_scm_set_remote_state);
 430
 431 /**
 432  * qcom_scm_assign_mem() - Make a secure call to reassign memory ownership
 433  * @mem_addr: mem region whose ownership need to be reassigned
 434  * @mem_sz:   size of the region.
 435  * @srcvm:    vmid for current set of owners, each set bit in
 436  *            flag indicate a unique owner
 437  * @newvm:    array having new owners and corrsponding permission
 438  *            flags
 439  * @dest_cnt: number of owners in next set.
 440  *
 441  * Return negative errno on failure, 0 on success, with @srcvm updated.
 442  */
 443 int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
 444                         unsigned int *srcvm,
 445                         struct qcom_scm_vmperm *newvm, int dest_cnt)
 446 {
 447         struct qcom_scm_current_perm_info *destvm;
 448         struct qcom_scm_mem_map_info *mem_to_map;
 449         phys_addr_t mem_to_map_phys;
 450         phys_addr_t dest_phys;
 451         dma_addr_t ptr_phys;
 452         size_t mem_to_map_sz;
 453         size_t dest_sz;
 454         size_t src_sz;
 455         size_t ptr_sz;
 456         int next_vm;
 457         __le32 *src;
 458         void *ptr;
 459         int ret;
 460         int len;
 461         int i;
 462
 463         src_sz = hweight_long(*srcvm) * sizeof(*src);
 464         mem_to_map_sz = sizeof(*mem_to_map);
 465         dest_sz = dest_cnt * sizeof(*destvm);
 466         ptr_sz = ALIGN(src_sz, SZ_64) + ALIGN(mem_to_map_sz, SZ_64) +
 467                         ALIGN(dest_sz, SZ_64);
 468
 469         ptr = dma_alloc_coherent(__scm->dev, ptr_sz, &ptr_phys, GFP_KERNEL);
 470         if (!ptr)
 471                 return -ENOMEM;
 472
 473         /* Fill source vmid detail */
 474         src = ptr;
 475         len = hweight_long(*srcvm);
 476         for (i = 0; i < len; i++) {
 477                 src[i] = cpu_to_le32(ffs(*srcvm) - 1);
 478                 *srcvm ^= 1 << (ffs(*srcvm) - 1);
 479         }
 480
 481         /* Fill details of mem buff to map */
 482         mem_to_map = ptr + ALIGN(src_sz, SZ_64);
 483         mem_to_map_phys = ptr_phys + ALIGN(src_sz, SZ_64);
 484         mem_to_map[0].mem_addr = cpu_to_le64(mem_addr);
 485         mem_to_map[0].mem_size = cpu_to_le64(mem_sz);
 486
 487         next_vm = 0;
 488         /* Fill details of next vmid detail */
 489         destvm = ptr + ALIGN(mem_to_map_sz, SZ_64) + ALIGN(src_sz, SZ_64);
 490         dest_phys = ptr_phys + ALIGN(mem_to_map_sz, SZ_64) + ALIGN(src_sz, SZ_64);
 491         for (i = 0; i < dest_cnt; i++) {
 492                 destvm[i].vmid = cpu_to_le32(newvm[i].vmid);
 493                 destvm[i].perm = cpu_to_le32(newvm[i].perm);
 494                 destvm[i].ctx = 0;
 495                 destvm[i].ctx_size = 0;
 496                 next_vm |= BIT(newvm[i].vmid);
 497         }
 498
 499         ret = __qcom_scm_assign_mem(__scm->dev, mem_to_map_phys, mem_to_map_sz,
 500                                     ptr_phys, src_sz, dest_phys, dest_sz);
 501         dma_free_coherent(__scm->dev, ptr_sz, ptr, ptr_phys);
 502         if (ret) {
 503                 dev_err(__scm->dev,
 504                         "Assign memory protection call failed %d.\n", ret);
 505                 return -EINVAL;
 506         }
 507
 508         *srcvm = next_vm;
 509         return 0;
 510 }
 511 EXPORT_SYMBOL(qcom_scm_assign_mem);
 512
 513 static int qcom_scm_probe(struct platform_device *pdev)
 514 {
 515         struct qcom_scm *scm;
 516         unsigned long clks;
 517         int ret;
 518
 519         scm = devm_kzalloc(&pdev->dev, sizeof(*scm), GFP_KERNEL);
 520         if (!scm)
 521                 return -ENOMEM;
 522
 523         ret = qcom_scm_find_dload_address(&pdev->dev, &scm->dload_mode_addr);
 524         if (ret < 0)
 525                 return ret;
 526
 527         clks = (unsigned long)of_device_get_match_data(&pdev->dev);
 528         if (clks & SCM_HAS_CORE_CLK) {
 529                 scm->core_clk = devm_clk_get(&pdev->dev, "core");
 530                 if (IS_ERR(scm->core_clk)) {
 531                         if (PTR_ERR(scm->core_clk) != -EPROBE_DEFER)
 532                                 dev_err(&pdev->dev,
 533                                         "failed to acquire core clk\n");
 534                         return PTR_ERR(scm->core_clk);
 535                 }
 536         }
 537
 538         if (clks & SCM_HAS_IFACE_CLK) {
 539                 scm->iface_clk = devm_clk_get(&pdev->dev, "iface");
 540                 if (IS_ERR(scm->iface_clk)) {
 541                         if (PTR_ERR(scm->iface_clk) != -EPROBE_DEFER)
 542                                 dev_err(&pdev->dev,
 543                                         "failed to acquire iface clk\n");
 544                         return PTR_ERR(scm->iface_clk);
 545                 }
 546         }
 547
 548         if (clks & SCM_HAS_BUS_CLK) {
 549                 scm->bus_clk = devm_clk_get(&pdev->dev, "bus");
 550                 if (IS_ERR(scm->bus_clk)) {
 551                         if (PTR_ERR(scm->bus_clk) != -EPROBE_DEFER)
 552                                 dev_err(&pdev->dev,
 553                                         "failed to acquire bus clk\n");
 554                         return PTR_ERR(scm->bus_clk);
 555                 }
 556         }
 557
 558         scm->reset.ops = &qcom_scm_pas_reset_ops;
 559         scm->reset.nr_resets = 1;
 560         scm->reset.of_node = pdev->dev.of_node;
 561         ret = devm_reset_controller_register(&pdev->dev, &scm->reset);
 562         if (ret)
 563                 return ret;
 564
 565         /* vote for max clk rate for highest performance */
 566         ret = clk_set_rate(scm->core_clk, INT_MAX);
 567         if (ret)
 568                 return ret;
 569
 570         __scm = scm;
 571         __scm->dev = &pdev->dev;
 572
 573         __qcom_scm_init();
 574
 575         /*
 576          * If requested enable "download mode", from this point on warmboot
 577          * will cause the the boot stages to enter download mode, unless
 578          * disabled below by a clean shutdown/reboot.
 579          */
 580         if (download_mode)
 581                 qcom_scm_set_download_mode(true);
 582
 583         return 0;
 584 }
 585
 586 static void qcom_scm_shutdown(struct platform_device *pdev)
 587 {
 588         /* Clean shutdown, disable download mode to allow normal restart */
 589         qcom_scm_set_download_mode(false);
 590 }
 591
 592 static const struct of_device_id qcom_scm_dt_match[] = {
 593         { .compatible = "qcom,scm-apq8064",
 594           /* FIXME: This should have .data = (void *) SCM_HAS_CORE_CLK */
 595         },
 596         { .compatible = "qcom,scm-msm8660",
 597           .data = (void *) SCM_HAS_CORE_CLK,
 598         },
 599         { .compatible = "qcom,scm-msm8960",
 600           .data = (void *) SCM_HAS_CORE_CLK,
 601         },
 602         { .compatible = "qcom,scm-msm8996",
 603           .data = NULL, /* no clocks */
 604         },
 605         { .compatible = "qcom,scm-ipq4019",
 606           .data = NULL, /* no clocks */
 607         },
 608         { .compatible = "qcom,scm",
 609           .data = (void *)(SCM_HAS_CORE_CLK
 610                            | SCM_HAS_IFACE_CLK
 611                            | SCM_HAS_BUS_CLK),
 612         },
 613         {}
 614 };
 615
 616 static struct platform_driver qcom_scm_driver = {
 617         .driver = {
 618                 .name   = "qcom_scm",
 619                 .of_match_table = qcom_scm_dt_match,
 620         },
 621         .probe = qcom_scm_probe,
 622         .shutdown = qcom_scm_shutdown,
 623 };
 624
 625 static int __init qcom_scm_init(void)
 626 {
 627         return platform_driver_register(&qcom_scm_driver);
 628 }
 629 subsys_initcall(qcom_scm_init);