GNU Linux-libre 4.4.289-gnu1
[releases.git] / drivers / dma / coh901318.c
1 /*
2  * driver/dma/coh901318.c
3  *
4  * Copyright (C) 2007-2009 ST-Ericsson
5  * License terms: GNU General Public License (GPL) version 2
6  * DMA driver for COH 901 318
7  * Author: Per Friden <per.friden@stericsson.com>
8  */
9
10 #include <linux/init.h>
11 #include <linux/module.h>
12 #include <linux/kernel.h> /* printk() */
13 #include <linux/fs.h> /* everything... */
14 #include <linux/scatterlist.h>
15 #include <linux/slab.h> /* kmalloc() */
16 #include <linux/dmaengine.h>
17 #include <linux/platform_device.h>
18 #include <linux/device.h>
19 #include <linux/irqreturn.h>
20 #include <linux/interrupt.h>
21 #include <linux/io.h>
22 #include <linux/uaccess.h>
23 #include <linux/debugfs.h>
24 #include <linux/platform_data/dma-coh901318.h>
25 #include <linux/of_dma.h>
26
27 #include "coh901318.h"
28 #include "dmaengine.h"
29
30 #define COH901318_MOD32_MASK                                    (0x1F)
31 #define COH901318_WORD_MASK                                     (0xFFFFFFFF)
32 /* INT_STATUS - Interrupt Status Registers 32bit (R/-) */
33 #define COH901318_INT_STATUS1                                   (0x0000)
34 #define COH901318_INT_STATUS2                                   (0x0004)
35 /* TC_INT_STATUS - Terminal Count Interrupt Status Registers 32bit (R/-) */
36 #define COH901318_TC_INT_STATUS1                                (0x0008)
37 #define COH901318_TC_INT_STATUS2                                (0x000C)
38 /* TC_INT_CLEAR - Terminal Count Interrupt Clear Registers 32bit (-/W) */
39 #define COH901318_TC_INT_CLEAR1                                 (0x0010)
40 #define COH901318_TC_INT_CLEAR2                                 (0x0014)
41 /* RAW_TC_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
42 #define COH901318_RAW_TC_INT_STATUS1                            (0x0018)
43 #define COH901318_RAW_TC_INT_STATUS2                            (0x001C)
44 /* BE_INT_STATUS - Bus Error Interrupt Status Registers 32bit (R/-) */
45 #define COH901318_BE_INT_STATUS1                                (0x0020)
46 #define COH901318_BE_INT_STATUS2                                (0x0024)
47 /* BE_INT_CLEAR - Bus Error Interrupt Clear Registers 32bit (-/W) */
48 #define COH901318_BE_INT_CLEAR1                                 (0x0028)
49 #define COH901318_BE_INT_CLEAR2                                 (0x002C)
50 /* RAW_BE_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
51 #define COH901318_RAW_BE_INT_STATUS1                            (0x0030)
52 #define COH901318_RAW_BE_INT_STATUS2                            (0x0034)
53
54 /*
55  * CX_CFG - Channel Configuration Registers 32bit (R/W)
56  */
57 #define COH901318_CX_CFG                                        (0x0100)
58 #define COH901318_CX_CFG_SPACING                                (0x04)
59 /* Channel enable activates tha dma job */
60 #define COH901318_CX_CFG_CH_ENABLE                              (0x00000001)
61 #define COH901318_CX_CFG_CH_DISABLE                             (0x00000000)
62 /* Request Mode */
63 #define COH901318_CX_CFG_RM_MASK                                (0x00000006)
64 #define COH901318_CX_CFG_RM_MEMORY_TO_MEMORY                    (0x0 << 1)
65 #define COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY                   (0x1 << 1)
66 #define COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY                   (0x1 << 1)
67 #define COH901318_CX_CFG_RM_PRIMARY_TO_SECONDARY                (0x3 << 1)
68 #define COH901318_CX_CFG_RM_SECONDARY_TO_PRIMARY                (0x3 << 1)
69 /* Linked channel request field. RM must == 11 */
70 #define COH901318_CX_CFG_LCRF_SHIFT                             3
71 #define COH901318_CX_CFG_LCRF_MASK                              (0x000001F8)
72 #define COH901318_CX_CFG_LCR_DISABLE                            (0x00000000)
73 /* Terminal Counter Interrupt Request Mask */
74 #define COH901318_CX_CFG_TC_IRQ_ENABLE                          (0x00000200)
75 #define COH901318_CX_CFG_TC_IRQ_DISABLE                         (0x00000000)
76 /* Bus Error interrupt Mask */
77 #define COH901318_CX_CFG_BE_IRQ_ENABLE                          (0x00000400)
78 #define COH901318_CX_CFG_BE_IRQ_DISABLE                         (0x00000000)
79
80 /*
81  * CX_STAT - Channel Status Registers 32bit (R/-)
82  */
83 #define COH901318_CX_STAT                                       (0x0200)
84 #define COH901318_CX_STAT_SPACING                               (0x04)
85 #define COH901318_CX_STAT_RBE_IRQ_IND                           (0x00000008)
86 #define COH901318_CX_STAT_RTC_IRQ_IND                           (0x00000004)
87 #define COH901318_CX_STAT_ACTIVE                                (0x00000002)
88 #define COH901318_CX_STAT_ENABLED                               (0x00000001)
89
90 /*
91  * CX_CTRL - Channel Control Registers 32bit (R/W)
92  */
93 #define COH901318_CX_CTRL                                       (0x0400)
94 #define COH901318_CX_CTRL_SPACING                               (0x10)
95 /* Transfer Count Enable */
96 #define COH901318_CX_CTRL_TC_ENABLE                             (0x00001000)
97 #define COH901318_CX_CTRL_TC_DISABLE                            (0x00000000)
98 /* Transfer Count Value 0 - 4095 */
99 #define COH901318_CX_CTRL_TC_VALUE_MASK                         (0x00000FFF)
100 /* Burst count */
101 #define COH901318_CX_CTRL_BURST_COUNT_MASK                      (0x0000E000)
102 #define COH901318_CX_CTRL_BURST_COUNT_64_BYTES                  (0x7 << 13)
103 #define COH901318_CX_CTRL_BURST_COUNT_48_BYTES                  (0x6 << 13)
104 #define COH901318_CX_CTRL_BURST_COUNT_32_BYTES                  (0x5 << 13)
105 #define COH901318_CX_CTRL_BURST_COUNT_16_BYTES                  (0x4 << 13)
106 #define COH901318_CX_CTRL_BURST_COUNT_8_BYTES                   (0x3 << 13)
107 #define COH901318_CX_CTRL_BURST_COUNT_4_BYTES                   (0x2 << 13)
108 #define COH901318_CX_CTRL_BURST_COUNT_2_BYTES                   (0x1 << 13)
109 #define COH901318_CX_CTRL_BURST_COUNT_1_BYTE                    (0x0 << 13)
110 /* Source bus size  */
111 #define COH901318_CX_CTRL_SRC_BUS_SIZE_MASK                     (0x00030000)
112 #define COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS                  (0x2 << 16)
113 #define COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS                  (0x1 << 16)
114 #define COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS                   (0x0 << 16)
115 /* Source address increment */
116 #define COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE                   (0x00040000)
117 #define COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE                  (0x00000000)
118 /* Destination Bus Size */
119 #define COH901318_CX_CTRL_DST_BUS_SIZE_MASK                     (0x00180000)
120 #define COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS                  (0x2 << 19)
121 #define COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS                  (0x1 << 19)
122 #define COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS                   (0x0 << 19)
123 /* Destination address increment */
124 #define COH901318_CX_CTRL_DST_ADDR_INC_ENABLE                   (0x00200000)
125 #define COH901318_CX_CTRL_DST_ADDR_INC_DISABLE                  (0x00000000)
126 /* Master Mode (Master2 is only connected to MSL) */
127 #define COH901318_CX_CTRL_MASTER_MODE_MASK                      (0x00C00000)
128 #define COH901318_CX_CTRL_MASTER_MODE_M2R_M1W                   (0x3 << 22)
129 #define COH901318_CX_CTRL_MASTER_MODE_M1R_M2W                   (0x2 << 22)
130 #define COH901318_CX_CTRL_MASTER_MODE_M2RW                      (0x1 << 22)
131 #define COH901318_CX_CTRL_MASTER_MODE_M1RW                      (0x0 << 22)
132 /* Terminal Count flag to PER enable */
133 #define COH901318_CX_CTRL_TCP_ENABLE                            (0x01000000)
134 #define COH901318_CX_CTRL_TCP_DISABLE                           (0x00000000)
135 /* Terminal Count flags to CPU enable */
136 #define COH901318_CX_CTRL_TC_IRQ_ENABLE                         (0x02000000)
137 #define COH901318_CX_CTRL_TC_IRQ_DISABLE                        (0x00000000)
138 /* Hand shake to peripheral */
139 #define COH901318_CX_CTRL_HSP_ENABLE                            (0x04000000)
140 #define COH901318_CX_CTRL_HSP_DISABLE                           (0x00000000)
141 #define COH901318_CX_CTRL_HSS_ENABLE                            (0x08000000)
142 #define COH901318_CX_CTRL_HSS_DISABLE                           (0x00000000)
143 /* DMA mode */
144 #define COH901318_CX_CTRL_DDMA_MASK                             (0x30000000)
145 #define COH901318_CX_CTRL_DDMA_LEGACY                           (0x0 << 28)
146 #define COH901318_CX_CTRL_DDMA_DEMAND_DMA1                      (0x1 << 28)
147 #define COH901318_CX_CTRL_DDMA_DEMAND_DMA2                      (0x2 << 28)
148 /* Primary Request Data Destination */
149 #define COH901318_CX_CTRL_PRDD_MASK                             (0x40000000)
150 #define COH901318_CX_CTRL_PRDD_DEST                             (0x1 << 30)
151 #define COH901318_CX_CTRL_PRDD_SOURCE                           (0x0 << 30)
152
153 /*
154  * CX_SRC_ADDR - Channel Source Address Registers 32bit (R/W)
155  */
156 #define COH901318_CX_SRC_ADDR                                   (0x0404)
157 #define COH901318_CX_SRC_ADDR_SPACING                           (0x10)
158
159 /*
160  * CX_DST_ADDR - Channel Destination Address Registers 32bit R/W
161  */
162 #define COH901318_CX_DST_ADDR                                   (0x0408)
163 #define COH901318_CX_DST_ADDR_SPACING                           (0x10)
164
165 /*
166  * CX_LNK_ADDR - Channel Link Address Registers 32bit (R/W)
167  */
168 #define COH901318_CX_LNK_ADDR                                   (0x040C)
169 #define COH901318_CX_LNK_ADDR_SPACING                           (0x10)
170 #define COH901318_CX_LNK_LINK_IMMEDIATE                         (0x00000001)
171
172 /**
173  * struct coh901318_params - parameters for DMAC configuration
174  * @config: DMA config register
175  * @ctrl_lli_last: DMA control register for the last lli in the list
176  * @ctrl_lli: DMA control register for an lli
177  * @ctrl_lli_chained: DMA control register for a chained lli
178  */
179 struct coh901318_params {
180         u32 config;
181         u32 ctrl_lli_last;
182         u32 ctrl_lli;
183         u32 ctrl_lli_chained;
184 };
185
186 /**
187  * struct coh_dma_channel - dma channel base
188  * @name: ascii name of dma channel
189  * @number: channel id number
190  * @desc_nbr_max: number of preallocated descriptors
191  * @priority_high: prio of channel, 0 low otherwise high.
192  * @param: configuration parameters
193  */
194 struct coh_dma_channel {
195         const char name[32];
196         const int number;
197         const int desc_nbr_max;
198         const int priority_high;
199         const struct coh901318_params param;
200 };
201
202 /**
203  * struct powersave - DMA power save structure
204  * @lock: lock protecting data in this struct
205  * @started_channels: bit mask indicating active dma channels
206  */
207 struct powersave {
208         spinlock_t lock;
209         u64 started_channels;
210 };
211
212 /* points out all dma slave channels.
213  * Syntax is [A1, B1, A2, B2, .... ,-1,-1]
214  * Select all channels from A to B, end of list is marked with -1,-1
215  */
216 static int dma_slave_channels[] = {
217         U300_DMA_MSL_TX_0, U300_DMA_SPI_RX,
218         U300_DMA_UART1_TX, U300_DMA_UART1_RX, -1, -1};
219
220 /* points out all dma memcpy channels. */
221 static int dma_memcpy_channels[] = {
222         U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1};
223
224 #define flags_memcpy_config (COH901318_CX_CFG_CH_DISABLE | \
225                         COH901318_CX_CFG_RM_MEMORY_TO_MEMORY | \
226                         COH901318_CX_CFG_LCR_DISABLE | \
227                         COH901318_CX_CFG_TC_IRQ_ENABLE | \
228                         COH901318_CX_CFG_BE_IRQ_ENABLE)
229 #define flags_memcpy_lli_chained (COH901318_CX_CTRL_TC_ENABLE | \
230                         COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
231                         COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
232                         COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
233                         COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
234                         COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
235                         COH901318_CX_CTRL_MASTER_MODE_M1RW | \
236                         COH901318_CX_CTRL_TCP_DISABLE | \
237                         COH901318_CX_CTRL_TC_IRQ_DISABLE | \
238                         COH901318_CX_CTRL_HSP_DISABLE | \
239                         COH901318_CX_CTRL_HSS_DISABLE | \
240                         COH901318_CX_CTRL_DDMA_LEGACY | \
241                         COH901318_CX_CTRL_PRDD_SOURCE)
242 #define flags_memcpy_lli (COH901318_CX_CTRL_TC_ENABLE | \
243                         COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
244                         COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
245                         COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
246                         COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
247                         COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
248                         COH901318_CX_CTRL_MASTER_MODE_M1RW | \
249                         COH901318_CX_CTRL_TCP_DISABLE | \
250                         COH901318_CX_CTRL_TC_IRQ_DISABLE | \
251                         COH901318_CX_CTRL_HSP_DISABLE | \
252                         COH901318_CX_CTRL_HSS_DISABLE | \
253                         COH901318_CX_CTRL_DDMA_LEGACY | \
254                         COH901318_CX_CTRL_PRDD_SOURCE)
255 #define flags_memcpy_lli_last (COH901318_CX_CTRL_TC_ENABLE | \
256                         COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
257                         COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
258                         COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
259                         COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
260                         COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
261                         COH901318_CX_CTRL_MASTER_MODE_M1RW | \
262                         COH901318_CX_CTRL_TCP_DISABLE | \
263                         COH901318_CX_CTRL_TC_IRQ_ENABLE | \
264                         COH901318_CX_CTRL_HSP_DISABLE | \
265                         COH901318_CX_CTRL_HSS_DISABLE | \
266                         COH901318_CX_CTRL_DDMA_LEGACY | \
267                         COH901318_CX_CTRL_PRDD_SOURCE)
268
269 const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
270         {
271                 .number = U300_DMA_MSL_TX_0,
272                 .name = "MSL TX 0",
273                 .priority_high = 0,
274         },
275         {
276                 .number = U300_DMA_MSL_TX_1,
277                 .name = "MSL TX 1",
278                 .priority_high = 0,
279                 .param.config = COH901318_CX_CFG_CH_DISABLE |
280                                 COH901318_CX_CFG_LCR_DISABLE |
281                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
282                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
283                 .param.ctrl_lli_chained = 0 |
284                                 COH901318_CX_CTRL_TC_ENABLE |
285                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
286                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
287                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
288                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
289                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
290                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
291                                 COH901318_CX_CTRL_TCP_DISABLE |
292                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
293                                 COH901318_CX_CTRL_HSP_ENABLE |
294                                 COH901318_CX_CTRL_HSS_DISABLE |
295                                 COH901318_CX_CTRL_DDMA_LEGACY |
296                                 COH901318_CX_CTRL_PRDD_SOURCE,
297                 .param.ctrl_lli = 0 |
298                                 COH901318_CX_CTRL_TC_ENABLE |
299                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
300                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
301                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
302                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
303                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
304                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
305                                 COH901318_CX_CTRL_TCP_ENABLE |
306                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
307                                 COH901318_CX_CTRL_HSP_ENABLE |
308                                 COH901318_CX_CTRL_HSS_DISABLE |
309                                 COH901318_CX_CTRL_DDMA_LEGACY |
310                                 COH901318_CX_CTRL_PRDD_SOURCE,
311                 .param.ctrl_lli_last = 0 |
312                                 COH901318_CX_CTRL_TC_ENABLE |
313                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
314                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
315                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
316                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
317                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
318                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
319                                 COH901318_CX_CTRL_TCP_ENABLE |
320                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
321                                 COH901318_CX_CTRL_HSP_ENABLE |
322                                 COH901318_CX_CTRL_HSS_DISABLE |
323                                 COH901318_CX_CTRL_DDMA_LEGACY |
324                                 COH901318_CX_CTRL_PRDD_SOURCE,
325         },
326         {
327                 .number = U300_DMA_MSL_TX_2,
328                 .name = "MSL TX 2",
329                 .priority_high = 0,
330                 .param.config = COH901318_CX_CFG_CH_DISABLE |
331                                 COH901318_CX_CFG_LCR_DISABLE |
332                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
333                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
334                 .param.ctrl_lli_chained = 0 |
335                                 COH901318_CX_CTRL_TC_ENABLE |
336                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
337                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
338                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
339                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
340                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
341                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
342                                 COH901318_CX_CTRL_TCP_DISABLE |
343                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
344                                 COH901318_CX_CTRL_HSP_ENABLE |
345                                 COH901318_CX_CTRL_HSS_DISABLE |
346                                 COH901318_CX_CTRL_DDMA_LEGACY |
347                                 COH901318_CX_CTRL_PRDD_SOURCE,
348                 .param.ctrl_lli = 0 |
349                                 COH901318_CX_CTRL_TC_ENABLE |
350                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
351                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
352                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
353                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
354                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
355                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
356                                 COH901318_CX_CTRL_TCP_ENABLE |
357                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
358                                 COH901318_CX_CTRL_HSP_ENABLE |
359                                 COH901318_CX_CTRL_HSS_DISABLE |
360                                 COH901318_CX_CTRL_DDMA_LEGACY |
361                                 COH901318_CX_CTRL_PRDD_SOURCE,
362                 .param.ctrl_lli_last = 0 |
363                                 COH901318_CX_CTRL_TC_ENABLE |
364                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
365                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
366                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
367                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
368                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
369                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
370                                 COH901318_CX_CTRL_TCP_ENABLE |
371                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
372                                 COH901318_CX_CTRL_HSP_ENABLE |
373                                 COH901318_CX_CTRL_HSS_DISABLE |
374                                 COH901318_CX_CTRL_DDMA_LEGACY |
375                                 COH901318_CX_CTRL_PRDD_SOURCE,
376                 .desc_nbr_max = 10,
377         },
378         {
379                 .number = U300_DMA_MSL_TX_3,
380                 .name = "MSL TX 3",
381                 .priority_high = 0,
382                 .param.config = COH901318_CX_CFG_CH_DISABLE |
383                                 COH901318_CX_CFG_LCR_DISABLE |
384                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
385                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
386                 .param.ctrl_lli_chained = 0 |
387                                 COH901318_CX_CTRL_TC_ENABLE |
388                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
389                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
390                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
391                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
392                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
393                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
394                                 COH901318_CX_CTRL_TCP_DISABLE |
395                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
396                                 COH901318_CX_CTRL_HSP_ENABLE |
397                                 COH901318_CX_CTRL_HSS_DISABLE |
398                                 COH901318_CX_CTRL_DDMA_LEGACY |
399                                 COH901318_CX_CTRL_PRDD_SOURCE,
400                 .param.ctrl_lli = 0 |
401                                 COH901318_CX_CTRL_TC_ENABLE |
402                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
403                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
404                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
405                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
406                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
407                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
408                                 COH901318_CX_CTRL_TCP_ENABLE |
409                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
410                                 COH901318_CX_CTRL_HSP_ENABLE |
411                                 COH901318_CX_CTRL_HSS_DISABLE |
412                                 COH901318_CX_CTRL_DDMA_LEGACY |
413                                 COH901318_CX_CTRL_PRDD_SOURCE,
414                 .param.ctrl_lli_last = 0 |
415                                 COH901318_CX_CTRL_TC_ENABLE |
416                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
417                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
418                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
419                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
420                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
421                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
422                                 COH901318_CX_CTRL_TCP_ENABLE |
423                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
424                                 COH901318_CX_CTRL_HSP_ENABLE |
425                                 COH901318_CX_CTRL_HSS_DISABLE |
426                                 COH901318_CX_CTRL_DDMA_LEGACY |
427                                 COH901318_CX_CTRL_PRDD_SOURCE,
428         },
429         {
430                 .number = U300_DMA_MSL_TX_4,
431                 .name = "MSL TX 4",
432                 .priority_high = 0,
433                 .param.config = COH901318_CX_CFG_CH_DISABLE |
434                                 COH901318_CX_CFG_LCR_DISABLE |
435                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
436                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
437                 .param.ctrl_lli_chained = 0 |
438                                 COH901318_CX_CTRL_TC_ENABLE |
439                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
440                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
441                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
442                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
443                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
444                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
445                                 COH901318_CX_CTRL_TCP_DISABLE |
446                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
447                                 COH901318_CX_CTRL_HSP_ENABLE |
448                                 COH901318_CX_CTRL_HSS_DISABLE |
449                                 COH901318_CX_CTRL_DDMA_LEGACY |
450                                 COH901318_CX_CTRL_PRDD_SOURCE,
451                 .param.ctrl_lli = 0 |
452                                 COH901318_CX_CTRL_TC_ENABLE |
453                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
454                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
455                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
456                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
457                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
458                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
459                                 COH901318_CX_CTRL_TCP_ENABLE |
460                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
461                                 COH901318_CX_CTRL_HSP_ENABLE |
462                                 COH901318_CX_CTRL_HSS_DISABLE |
463                                 COH901318_CX_CTRL_DDMA_LEGACY |
464                                 COH901318_CX_CTRL_PRDD_SOURCE,
465                 .param.ctrl_lli_last = 0 |
466                                 COH901318_CX_CTRL_TC_ENABLE |
467                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
468                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
469                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
470                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
471                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
472                                 COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
473                                 COH901318_CX_CTRL_TCP_ENABLE |
474                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
475                                 COH901318_CX_CTRL_HSP_ENABLE |
476                                 COH901318_CX_CTRL_HSS_DISABLE |
477                                 COH901318_CX_CTRL_DDMA_LEGACY |
478                                 COH901318_CX_CTRL_PRDD_SOURCE,
479         },
480         {
481                 .number = U300_DMA_MSL_TX_5,
482                 .name = "MSL TX 5",
483                 .priority_high = 0,
484         },
485         {
486                 .number = U300_DMA_MSL_TX_6,
487                 .name = "MSL TX 6",
488                 .priority_high = 0,
489         },
490         {
491                 .number = U300_DMA_MSL_RX_0,
492                 .name = "MSL RX 0",
493                 .priority_high = 0,
494         },
495         {
496                 .number = U300_DMA_MSL_RX_1,
497                 .name = "MSL RX 1",
498                 .priority_high = 0,
499                 .param.config = COH901318_CX_CFG_CH_DISABLE |
500                                 COH901318_CX_CFG_LCR_DISABLE |
501                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
502                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
503                 .param.ctrl_lli_chained = 0 |
504                                 COH901318_CX_CTRL_TC_ENABLE |
505                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
506                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
507                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
508                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
509                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
510                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
511                                 COH901318_CX_CTRL_TCP_DISABLE |
512                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
513                                 COH901318_CX_CTRL_HSP_ENABLE |
514                                 COH901318_CX_CTRL_HSS_DISABLE |
515                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
516                                 COH901318_CX_CTRL_PRDD_DEST,
517                 .param.ctrl_lli = 0,
518                 .param.ctrl_lli_last = 0 |
519                                 COH901318_CX_CTRL_TC_ENABLE |
520                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
521                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
522                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
523                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
524                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
525                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
526                                 COH901318_CX_CTRL_TCP_DISABLE |
527                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
528                                 COH901318_CX_CTRL_HSP_ENABLE |
529                                 COH901318_CX_CTRL_HSS_DISABLE |
530                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
531                                 COH901318_CX_CTRL_PRDD_DEST,
532         },
533         {
534                 .number = U300_DMA_MSL_RX_2,
535                 .name = "MSL RX 2",
536                 .priority_high = 0,
537                 .param.config = COH901318_CX_CFG_CH_DISABLE |
538                                 COH901318_CX_CFG_LCR_DISABLE |
539                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
540                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
541                 .param.ctrl_lli_chained = 0 |
542                                 COH901318_CX_CTRL_TC_ENABLE |
543                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
544                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
545                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
546                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
547                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
548                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
549                                 COH901318_CX_CTRL_TCP_DISABLE |
550                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
551                                 COH901318_CX_CTRL_HSP_ENABLE |
552                                 COH901318_CX_CTRL_HSS_DISABLE |
553                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
554                                 COH901318_CX_CTRL_PRDD_DEST,
555                 .param.ctrl_lli = 0 |
556                                 COH901318_CX_CTRL_TC_ENABLE |
557                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
558                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
559                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
560                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
561                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
562                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
563                                 COH901318_CX_CTRL_TCP_DISABLE |
564                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
565                                 COH901318_CX_CTRL_HSP_ENABLE |
566                                 COH901318_CX_CTRL_HSS_DISABLE |
567                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
568                                 COH901318_CX_CTRL_PRDD_DEST,
569                 .param.ctrl_lli_last = 0 |
570                                 COH901318_CX_CTRL_TC_ENABLE |
571                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
572                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
573                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
574                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
575                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
576                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
577                                 COH901318_CX_CTRL_TCP_DISABLE |
578                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
579                                 COH901318_CX_CTRL_HSP_ENABLE |
580                                 COH901318_CX_CTRL_HSS_DISABLE |
581                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
582                                 COH901318_CX_CTRL_PRDD_DEST,
583         },
584         {
585                 .number = U300_DMA_MSL_RX_3,
586                 .name = "MSL RX 3",
587                 .priority_high = 0,
588                 .param.config = COH901318_CX_CFG_CH_DISABLE |
589                                 COH901318_CX_CFG_LCR_DISABLE |
590                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
591                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
592                 .param.ctrl_lli_chained = 0 |
593                                 COH901318_CX_CTRL_TC_ENABLE |
594                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
595                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
596                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
597                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
598                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
599                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
600                                 COH901318_CX_CTRL_TCP_DISABLE |
601                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
602                                 COH901318_CX_CTRL_HSP_ENABLE |
603                                 COH901318_CX_CTRL_HSS_DISABLE |
604                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
605                                 COH901318_CX_CTRL_PRDD_DEST,
606                 .param.ctrl_lli = 0 |
607                                 COH901318_CX_CTRL_TC_ENABLE |
608                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
609                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
610                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
611                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
612                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
613                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
614                                 COH901318_CX_CTRL_TCP_DISABLE |
615                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
616                                 COH901318_CX_CTRL_HSP_ENABLE |
617                                 COH901318_CX_CTRL_HSS_DISABLE |
618                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
619                                 COH901318_CX_CTRL_PRDD_DEST,
620                 .param.ctrl_lli_last = 0 |
621                                 COH901318_CX_CTRL_TC_ENABLE |
622                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
623                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
624                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
625                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
626                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
627                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
628                                 COH901318_CX_CTRL_TCP_DISABLE |
629                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
630                                 COH901318_CX_CTRL_HSP_ENABLE |
631                                 COH901318_CX_CTRL_HSS_DISABLE |
632                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
633                                 COH901318_CX_CTRL_PRDD_DEST,
634         },
635         {
636                 .number = U300_DMA_MSL_RX_4,
637                 .name = "MSL RX 4",
638                 .priority_high = 0,
639                 .param.config = COH901318_CX_CFG_CH_DISABLE |
640                                 COH901318_CX_CFG_LCR_DISABLE |
641                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
642                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
643                 .param.ctrl_lli_chained = 0 |
644                                 COH901318_CX_CTRL_TC_ENABLE |
645                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
646                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
647                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
648                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
649                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
650                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
651                                 COH901318_CX_CTRL_TCP_DISABLE |
652                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
653                                 COH901318_CX_CTRL_HSP_ENABLE |
654                                 COH901318_CX_CTRL_HSS_DISABLE |
655                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
656                                 COH901318_CX_CTRL_PRDD_DEST,
657                 .param.ctrl_lli = 0 |
658                                 COH901318_CX_CTRL_TC_ENABLE |
659                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
660                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
661                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
662                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
663                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
664                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
665                                 COH901318_CX_CTRL_TCP_DISABLE |
666                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
667                                 COH901318_CX_CTRL_HSP_ENABLE |
668                                 COH901318_CX_CTRL_HSS_DISABLE |
669                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
670                                 COH901318_CX_CTRL_PRDD_DEST,
671                 .param.ctrl_lli_last = 0 |
672                                 COH901318_CX_CTRL_TC_ENABLE |
673                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
674                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
675                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
676                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
677                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
678                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
679                                 COH901318_CX_CTRL_TCP_DISABLE |
680                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
681                                 COH901318_CX_CTRL_HSP_ENABLE |
682                                 COH901318_CX_CTRL_HSS_DISABLE |
683                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
684                                 COH901318_CX_CTRL_PRDD_DEST,
685         },
686         {
687                 .number = U300_DMA_MSL_RX_5,
688                 .name = "MSL RX 5",
689                 .priority_high = 0,
690                 .param.config = COH901318_CX_CFG_CH_DISABLE |
691                                 COH901318_CX_CFG_LCR_DISABLE |
692                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
693                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
694                 .param.ctrl_lli_chained = 0 |
695                                 COH901318_CX_CTRL_TC_ENABLE |
696                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
697                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
698                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
699                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
700                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
701                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
702                                 COH901318_CX_CTRL_TCP_DISABLE |
703                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
704                                 COH901318_CX_CTRL_HSP_ENABLE |
705                                 COH901318_CX_CTRL_HSS_DISABLE |
706                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
707                                 COH901318_CX_CTRL_PRDD_DEST,
708                 .param.ctrl_lli = 0 |
709                                 COH901318_CX_CTRL_TC_ENABLE |
710                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
711                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
712                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
713                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
714                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
715                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
716                                 COH901318_CX_CTRL_TCP_DISABLE |
717                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
718                                 COH901318_CX_CTRL_HSP_ENABLE |
719                                 COH901318_CX_CTRL_HSS_DISABLE |
720                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
721                                 COH901318_CX_CTRL_PRDD_DEST,
722                 .param.ctrl_lli_last = 0 |
723                                 COH901318_CX_CTRL_TC_ENABLE |
724                                 COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
725                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
726                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
727                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
728                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
729                                 COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
730                                 COH901318_CX_CTRL_TCP_DISABLE |
731                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
732                                 COH901318_CX_CTRL_HSP_ENABLE |
733                                 COH901318_CX_CTRL_HSS_DISABLE |
734                                 COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
735                                 COH901318_CX_CTRL_PRDD_DEST,
736         },
737         {
738                 .number = U300_DMA_MSL_RX_6,
739                 .name = "MSL RX 6",
740                 .priority_high = 0,
741         },
742         /*
743          * Don't set up device address, burst count or size of src
744          * or dst bus for this peripheral - handled by PrimeCell
745          * DMA extension.
746          */
747         {
748                 .number = U300_DMA_MMCSD_RX_TX,
749                 .name = "MMCSD RX TX",
750                 .priority_high = 0,
751                 .param.config = COH901318_CX_CFG_CH_DISABLE |
752                                 COH901318_CX_CFG_LCR_DISABLE |
753                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
754                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
755                 .param.ctrl_lli_chained = 0 |
756                                 COH901318_CX_CTRL_TC_ENABLE |
757                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
758                                 COH901318_CX_CTRL_TCP_ENABLE |
759                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
760                                 COH901318_CX_CTRL_HSP_ENABLE |
761                                 COH901318_CX_CTRL_HSS_DISABLE |
762                                 COH901318_CX_CTRL_DDMA_LEGACY,
763                 .param.ctrl_lli = 0 |
764                                 COH901318_CX_CTRL_TC_ENABLE |
765                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
766                                 COH901318_CX_CTRL_TCP_ENABLE |
767                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
768                                 COH901318_CX_CTRL_HSP_ENABLE |
769                                 COH901318_CX_CTRL_HSS_DISABLE |
770                                 COH901318_CX_CTRL_DDMA_LEGACY,
771                 .param.ctrl_lli_last = 0 |
772                                 COH901318_CX_CTRL_TC_ENABLE |
773                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
774                                 COH901318_CX_CTRL_TCP_DISABLE |
775                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
776                                 COH901318_CX_CTRL_HSP_ENABLE |
777                                 COH901318_CX_CTRL_HSS_DISABLE |
778                                 COH901318_CX_CTRL_DDMA_LEGACY,
779
780         },
781         {
782                 .number = U300_DMA_MSPRO_TX,
783                 .name = "MSPRO TX",
784                 .priority_high = 0,
785         },
786         {
787                 .number = U300_DMA_MSPRO_RX,
788                 .name = "MSPRO RX",
789                 .priority_high = 0,
790         },
791         /*
792          * Don't set up device address, burst count or size of src
793          * or dst bus for this peripheral - handled by PrimeCell
794          * DMA extension.
795          */
796         {
797                 .number = U300_DMA_UART0_TX,
798                 .name = "UART0 TX",
799                 .priority_high = 0,
800                 .param.config = COH901318_CX_CFG_CH_DISABLE |
801                                 COH901318_CX_CFG_LCR_DISABLE |
802                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
803                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
804                 .param.ctrl_lli_chained = 0 |
805                                 COH901318_CX_CTRL_TC_ENABLE |
806                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
807                                 COH901318_CX_CTRL_TCP_ENABLE |
808                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
809                                 COH901318_CX_CTRL_HSP_ENABLE |
810                                 COH901318_CX_CTRL_HSS_DISABLE |
811                                 COH901318_CX_CTRL_DDMA_LEGACY,
812                 .param.ctrl_lli = 0 |
813                                 COH901318_CX_CTRL_TC_ENABLE |
814                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
815                                 COH901318_CX_CTRL_TCP_ENABLE |
816                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
817                                 COH901318_CX_CTRL_HSP_ENABLE |
818                                 COH901318_CX_CTRL_HSS_DISABLE |
819                                 COH901318_CX_CTRL_DDMA_LEGACY,
820                 .param.ctrl_lli_last = 0 |
821                                 COH901318_CX_CTRL_TC_ENABLE |
822                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
823                                 COH901318_CX_CTRL_TCP_ENABLE |
824                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
825                                 COH901318_CX_CTRL_HSP_ENABLE |
826                                 COH901318_CX_CTRL_HSS_DISABLE |
827                                 COH901318_CX_CTRL_DDMA_LEGACY,
828         },
829         {
830                 .number = U300_DMA_UART0_RX,
831                 .name = "UART0 RX",
832                 .priority_high = 0,
833                 .param.config = COH901318_CX_CFG_CH_DISABLE |
834                                 COH901318_CX_CFG_LCR_DISABLE |
835                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
836                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
837                 .param.ctrl_lli_chained = 0 |
838                                 COH901318_CX_CTRL_TC_ENABLE |
839                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
840                                 COH901318_CX_CTRL_TCP_ENABLE |
841                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
842                                 COH901318_CX_CTRL_HSP_ENABLE |
843                                 COH901318_CX_CTRL_HSS_DISABLE |
844                                 COH901318_CX_CTRL_DDMA_LEGACY,
845                 .param.ctrl_lli = 0 |
846                                 COH901318_CX_CTRL_TC_ENABLE |
847                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
848                                 COH901318_CX_CTRL_TCP_ENABLE |
849                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
850                                 COH901318_CX_CTRL_HSP_ENABLE |
851                                 COH901318_CX_CTRL_HSS_DISABLE |
852                                 COH901318_CX_CTRL_DDMA_LEGACY,
853                 .param.ctrl_lli_last = 0 |
854                                 COH901318_CX_CTRL_TC_ENABLE |
855                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
856                                 COH901318_CX_CTRL_TCP_ENABLE |
857                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
858                                 COH901318_CX_CTRL_HSP_ENABLE |
859                                 COH901318_CX_CTRL_HSS_DISABLE |
860                                 COH901318_CX_CTRL_DDMA_LEGACY,
861         },
862         {
863                 .number = U300_DMA_APEX_TX,
864                 .name = "APEX TX",
865                 .priority_high = 0,
866         },
867         {
868                 .number = U300_DMA_APEX_RX,
869                 .name = "APEX RX",
870                 .priority_high = 0,
871         },
872         {
873                 .number = U300_DMA_PCM_I2S0_TX,
874                 .name = "PCM I2S0 TX",
875                 .priority_high = 1,
876                 .param.config = COH901318_CX_CFG_CH_DISABLE |
877                                 COH901318_CX_CFG_LCR_DISABLE |
878                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
879                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
880                 .param.ctrl_lli_chained = 0 |
881                                 COH901318_CX_CTRL_TC_ENABLE |
882                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
883                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
884                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
885                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
886                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
887                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
888                                 COH901318_CX_CTRL_TCP_DISABLE |
889                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
890                                 COH901318_CX_CTRL_HSP_ENABLE |
891                                 COH901318_CX_CTRL_HSS_DISABLE |
892                                 COH901318_CX_CTRL_DDMA_LEGACY |
893                                 COH901318_CX_CTRL_PRDD_SOURCE,
894                 .param.ctrl_lli = 0 |
895                                 COH901318_CX_CTRL_TC_ENABLE |
896                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
897                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
898                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
899                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
900                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
901                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
902                                 COH901318_CX_CTRL_TCP_ENABLE |
903                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
904                                 COH901318_CX_CTRL_HSP_ENABLE |
905                                 COH901318_CX_CTRL_HSS_DISABLE |
906                                 COH901318_CX_CTRL_DDMA_LEGACY |
907                                 COH901318_CX_CTRL_PRDD_SOURCE,
908                 .param.ctrl_lli_last = 0 |
909                                 COH901318_CX_CTRL_TC_ENABLE |
910                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
911                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
912                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
913                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
914                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
915                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
916                                 COH901318_CX_CTRL_TCP_ENABLE |
917                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
918                                 COH901318_CX_CTRL_HSP_ENABLE |
919                                 COH901318_CX_CTRL_HSS_DISABLE |
920                                 COH901318_CX_CTRL_DDMA_LEGACY |
921                                 COH901318_CX_CTRL_PRDD_SOURCE,
922         },
923         {
924                 .number = U300_DMA_PCM_I2S0_RX,
925                 .name = "PCM I2S0 RX",
926                 .priority_high = 1,
927                 .param.config = COH901318_CX_CFG_CH_DISABLE |
928                                 COH901318_CX_CFG_LCR_DISABLE |
929                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
930                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
931                 .param.ctrl_lli_chained = 0 |
932                                 COH901318_CX_CTRL_TC_ENABLE |
933                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
934                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
935                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
936                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
937                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
938                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
939                                 COH901318_CX_CTRL_TCP_DISABLE |
940                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
941                                 COH901318_CX_CTRL_HSP_ENABLE |
942                                 COH901318_CX_CTRL_HSS_DISABLE |
943                                 COH901318_CX_CTRL_DDMA_LEGACY |
944                                 COH901318_CX_CTRL_PRDD_DEST,
945                 .param.ctrl_lli = 0 |
946                                 COH901318_CX_CTRL_TC_ENABLE |
947                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
948                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
949                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
950                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
951                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
952                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
953                                 COH901318_CX_CTRL_TCP_ENABLE |
954                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
955                                 COH901318_CX_CTRL_HSP_ENABLE |
956                                 COH901318_CX_CTRL_HSS_DISABLE |
957                                 COH901318_CX_CTRL_DDMA_LEGACY |
958                                 COH901318_CX_CTRL_PRDD_DEST,
959                 .param.ctrl_lli_last = 0 |
960                                 COH901318_CX_CTRL_TC_ENABLE |
961                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
962                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
963                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
964                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
965                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
966                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
967                                 COH901318_CX_CTRL_TCP_ENABLE |
968                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
969                                 COH901318_CX_CTRL_HSP_ENABLE |
970                                 COH901318_CX_CTRL_HSS_DISABLE |
971                                 COH901318_CX_CTRL_DDMA_LEGACY |
972                                 COH901318_CX_CTRL_PRDD_DEST,
973         },
974         {
975                 .number = U300_DMA_PCM_I2S1_TX,
976                 .name = "PCM I2S1 TX",
977                 .priority_high = 1,
978                 .param.config = COH901318_CX_CFG_CH_DISABLE |
979                                 COH901318_CX_CFG_LCR_DISABLE |
980                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
981                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
982                 .param.ctrl_lli_chained = 0 |
983                                 COH901318_CX_CTRL_TC_ENABLE |
984                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
985                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
986                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
987                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
988                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
989                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
990                                 COH901318_CX_CTRL_TCP_DISABLE |
991                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
992                                 COH901318_CX_CTRL_HSP_ENABLE |
993                                 COH901318_CX_CTRL_HSS_DISABLE |
994                                 COH901318_CX_CTRL_DDMA_LEGACY |
995                                 COH901318_CX_CTRL_PRDD_SOURCE,
996                 .param.ctrl_lli = 0 |
997                                 COH901318_CX_CTRL_TC_ENABLE |
998                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
999                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1000                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
1001                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1002                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
1003                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1004                                 COH901318_CX_CTRL_TCP_ENABLE |
1005                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1006                                 COH901318_CX_CTRL_HSP_ENABLE |
1007                                 COH901318_CX_CTRL_HSS_DISABLE |
1008                                 COH901318_CX_CTRL_DDMA_LEGACY |
1009                                 COH901318_CX_CTRL_PRDD_SOURCE,
1010                 .param.ctrl_lli_last = 0 |
1011                                 COH901318_CX_CTRL_TC_ENABLE |
1012                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1013                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1014                                 COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
1015                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1016                                 COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
1017                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1018                                 COH901318_CX_CTRL_TCP_ENABLE |
1019                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
1020                                 COH901318_CX_CTRL_HSP_ENABLE |
1021                                 COH901318_CX_CTRL_HSS_DISABLE |
1022                                 COH901318_CX_CTRL_DDMA_LEGACY |
1023                                 COH901318_CX_CTRL_PRDD_SOURCE,
1024         },
1025         {
1026                 .number = U300_DMA_PCM_I2S1_RX,
1027                 .name = "PCM I2S1 RX",
1028                 .priority_high = 1,
1029                 .param.config = COH901318_CX_CFG_CH_DISABLE |
1030                                 COH901318_CX_CFG_LCR_DISABLE |
1031                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
1032                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
1033                 .param.ctrl_lli_chained = 0 |
1034                                 COH901318_CX_CTRL_TC_ENABLE |
1035                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1036                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1037                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
1038                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1039                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
1040                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1041                                 COH901318_CX_CTRL_TCP_DISABLE |
1042                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1043                                 COH901318_CX_CTRL_HSP_ENABLE |
1044                                 COH901318_CX_CTRL_HSS_DISABLE |
1045                                 COH901318_CX_CTRL_DDMA_LEGACY |
1046                                 COH901318_CX_CTRL_PRDD_DEST,
1047                 .param.ctrl_lli = 0 |
1048                                 COH901318_CX_CTRL_TC_ENABLE |
1049                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1050                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1051                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
1052                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1053                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
1054                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1055                                 COH901318_CX_CTRL_TCP_ENABLE |
1056                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1057                                 COH901318_CX_CTRL_HSP_ENABLE |
1058                                 COH901318_CX_CTRL_HSS_DISABLE |
1059                                 COH901318_CX_CTRL_DDMA_LEGACY |
1060                                 COH901318_CX_CTRL_PRDD_DEST,
1061                 .param.ctrl_lli_last = 0 |
1062                                 COH901318_CX_CTRL_TC_ENABLE |
1063                                 COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
1064                                 COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
1065                                 COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
1066                                 COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
1067                                 COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
1068                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1069                                 COH901318_CX_CTRL_TCP_ENABLE |
1070                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
1071                                 COH901318_CX_CTRL_HSP_ENABLE |
1072                                 COH901318_CX_CTRL_HSS_DISABLE |
1073                                 COH901318_CX_CTRL_DDMA_LEGACY |
1074                                 COH901318_CX_CTRL_PRDD_DEST,
1075         },
1076         {
1077                 .number = U300_DMA_XGAM_CDI,
1078                 .name = "XGAM CDI",
1079                 .priority_high = 0,
1080         },
1081         {
1082                 .number = U300_DMA_XGAM_PDI,
1083                 .name = "XGAM PDI",
1084                 .priority_high = 0,
1085         },
1086         /*
1087          * Don't set up device address, burst count or size of src
1088          * or dst bus for this peripheral - handled by PrimeCell
1089          * DMA extension.
1090          */
1091         {
1092                 .number = U300_DMA_SPI_TX,
1093                 .name = "SPI TX",
1094                 .priority_high = 0,
1095                 .param.config = COH901318_CX_CFG_CH_DISABLE |
1096                                 COH901318_CX_CFG_LCR_DISABLE |
1097                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
1098                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
1099                 .param.ctrl_lli_chained = 0 |
1100                                 COH901318_CX_CTRL_TC_ENABLE |
1101                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1102                                 COH901318_CX_CTRL_TCP_DISABLE |
1103                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1104                                 COH901318_CX_CTRL_HSP_ENABLE |
1105                                 COH901318_CX_CTRL_HSS_DISABLE |
1106                                 COH901318_CX_CTRL_DDMA_LEGACY,
1107                 .param.ctrl_lli = 0 |
1108                                 COH901318_CX_CTRL_TC_ENABLE |
1109                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1110                                 COH901318_CX_CTRL_TCP_DISABLE |
1111                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
1112                                 COH901318_CX_CTRL_HSP_ENABLE |
1113                                 COH901318_CX_CTRL_HSS_DISABLE |
1114                                 COH901318_CX_CTRL_DDMA_LEGACY,
1115                 .param.ctrl_lli_last = 0 |
1116                                 COH901318_CX_CTRL_TC_ENABLE |
1117                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1118                                 COH901318_CX_CTRL_TCP_DISABLE |
1119                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
1120                                 COH901318_CX_CTRL_HSP_ENABLE |
1121                                 COH901318_CX_CTRL_HSS_DISABLE |
1122                                 COH901318_CX_CTRL_DDMA_LEGACY,
1123         },
1124         {
1125                 .number = U300_DMA_SPI_RX,
1126                 .name = "SPI RX",
1127                 .priority_high = 0,
1128                 .param.config = COH901318_CX_CFG_CH_DISABLE |
1129                                 COH901318_CX_CFG_LCR_DISABLE |
1130                                 COH901318_CX_CFG_TC_IRQ_ENABLE |
1131                                 COH901318_CX_CFG_BE_IRQ_ENABLE,
1132                 .param.ctrl_lli_chained = 0 |
1133                                 COH901318_CX_CTRL_TC_ENABLE |
1134                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1135                                 COH901318_CX_CTRL_TCP_DISABLE |
1136                                 COH901318_CX_CTRL_TC_IRQ_DISABLE |
1137                                 COH901318_CX_CTRL_HSP_ENABLE |
1138                                 COH901318_CX_CTRL_HSS_DISABLE |
1139                                 COH901318_CX_CTRL_DDMA_LEGACY,
1140                 .param.ctrl_lli = 0 |
1141                                 COH901318_CX_CTRL_TC_ENABLE |
1142                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1143                                 COH901318_CX_CTRL_TCP_DISABLE |
1144                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
1145                                 COH901318_CX_CTRL_HSP_ENABLE |
1146                                 COH901318_CX_CTRL_HSS_DISABLE |
1147                                 COH901318_CX_CTRL_DDMA_LEGACY,
1148                 .param.ctrl_lli_last = 0 |
1149                                 COH901318_CX_CTRL_TC_ENABLE |
1150                                 COH901318_CX_CTRL_MASTER_MODE_M1RW |
1151                                 COH901318_CX_CTRL_TCP_DISABLE |
1152                                 COH901318_CX_CTRL_TC_IRQ_ENABLE |
1153                                 COH901318_CX_CTRL_HSP_ENABLE |
1154                                 COH901318_CX_CTRL_HSS_DISABLE |
1155                                 COH901318_CX_CTRL_DDMA_LEGACY,
1156
1157         },
1158         {
1159                 .number = U300_DMA_GENERAL_PURPOSE_0,
1160                 .name = "GENERAL 00",
1161                 .priority_high = 0,
1162
1163                 .param.config = flags_memcpy_config,
1164                 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1165                 .param.ctrl_lli = flags_memcpy_lli,
1166                 .param.ctrl_lli_last = flags_memcpy_lli_last,
1167         },
1168         {
1169                 .number = U300_DMA_GENERAL_PURPOSE_1,
1170                 .name = "GENERAL 01",
1171                 .priority_high = 0,
1172
1173                 .param.config = flags_memcpy_config,
1174                 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1175                 .param.ctrl_lli = flags_memcpy_lli,
1176                 .param.ctrl_lli_last = flags_memcpy_lli_last,
1177         },
1178         {
1179                 .number = U300_DMA_GENERAL_PURPOSE_2,
1180                 .name = "GENERAL 02",
1181                 .priority_high = 0,
1182
1183                 .param.config = flags_memcpy_config,
1184                 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1185                 .param.ctrl_lli = flags_memcpy_lli,
1186                 .param.ctrl_lli_last = flags_memcpy_lli_last,
1187         },
1188         {
1189                 .number = U300_DMA_GENERAL_PURPOSE_3,
1190                 .name = "GENERAL 03",
1191                 .priority_high = 0,
1192
1193                 .param.config = flags_memcpy_config,
1194                 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1195                 .param.ctrl_lli = flags_memcpy_lli,
1196                 .param.ctrl_lli_last = flags_memcpy_lli_last,
1197         },
1198         {
1199                 .number = U300_DMA_GENERAL_PURPOSE_4,
1200                 .name = "GENERAL 04",
1201                 .priority_high = 0,
1202
1203                 .param.config = flags_memcpy_config,
1204                 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1205                 .param.ctrl_lli = flags_memcpy_lli,
1206                 .param.ctrl_lli_last = flags_memcpy_lli_last,
1207         },
1208         {
1209                 .number = U300_DMA_GENERAL_PURPOSE_5,
1210                 .name = "GENERAL 05",
1211                 .priority_high = 0,
1212
1213                 .param.config = flags_memcpy_config,
1214                 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1215                 .param.ctrl_lli = flags_memcpy_lli,
1216                 .param.ctrl_lli_last = flags_memcpy_lli_last,
1217         },
1218         {
1219                 .number = U300_DMA_GENERAL_PURPOSE_6,
1220                 .name = "GENERAL 06",
1221                 .priority_high = 0,
1222
1223                 .param.config = flags_memcpy_config,
1224                 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1225                 .param.ctrl_lli = flags_memcpy_lli,
1226                 .param.ctrl_lli_last = flags_memcpy_lli_last,
1227         },
1228         {
1229                 .number = U300_DMA_GENERAL_PURPOSE_7,
1230                 .name = "GENERAL 07",
1231                 .priority_high = 0,
1232
1233                 .param.config = flags_memcpy_config,
1234                 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1235                 .param.ctrl_lli = flags_memcpy_lli,
1236                 .param.ctrl_lli_last = flags_memcpy_lli_last,
1237         },
1238         {
1239                 .number = U300_DMA_GENERAL_PURPOSE_8,
1240                 .name = "GENERAL 08",
1241                 .priority_high = 0,
1242
1243                 .param.config = flags_memcpy_config,
1244                 .param.ctrl_lli_chained = flags_memcpy_lli_chained,
1245                 .param.ctrl_lli = flags_memcpy_lli,
1246                 .param.ctrl_lli_last = flags_memcpy_lli_last,
1247         },
1248         {
1249                 .number = U300_DMA_UART1_TX,
1250                 .name = "UART1 TX",
1251                 .priority_high = 0,
1252         },
1253         {
1254                 .number = U300_DMA_UART1_RX,
1255                 .name = "UART1 RX",
1256                 .priority_high = 0,
1257         }
1258 };
1259
1260 #define COHC_2_DEV(cohc) (&cohc->chan.dev->device)
1261
1262 #ifdef VERBOSE_DEBUG
1263 #define COH_DBG(x) ({ if (1) x; 0; })
1264 #else
1265 #define COH_DBG(x) ({ if (0) x; 0; })
1266 #endif
1267
1268 struct coh901318_desc {
1269         struct dma_async_tx_descriptor desc;
1270         struct list_head node;
1271         struct scatterlist *sg;
1272         unsigned int sg_len;
1273         struct coh901318_lli *lli;
1274         enum dma_transfer_direction dir;
1275         unsigned long flags;
1276         u32 head_config;
1277         u32 head_ctrl;
1278 };
1279
1280 struct coh901318_base {
1281         struct device *dev;
1282         void __iomem *virtbase;
1283         struct coh901318_pool pool;
1284         struct powersave pm;
1285         struct dma_device dma_slave;
1286         struct dma_device dma_memcpy;
1287         struct coh901318_chan *chans;
1288 };
1289
1290 struct coh901318_chan {
1291         spinlock_t lock;
1292         int allocated;
1293         int id;
1294         int stopped;
1295
1296         struct work_struct free_work;
1297         struct dma_chan chan;
1298
1299         struct tasklet_struct tasklet;
1300
1301         struct list_head active;
1302         struct list_head queue;
1303         struct list_head free;
1304
1305         unsigned long nbr_active_done;
1306         unsigned long busy;
1307
1308         u32 addr;
1309         u32 ctrl;
1310
1311         struct coh901318_base *base;
1312 };
1313
1314 static void coh901318_list_print(struct coh901318_chan *cohc,
1315                                  struct coh901318_lli *lli)
1316 {
1317         struct coh901318_lli *l = lli;
1318         int i = 0;
1319
1320         while (l) {
1321                 dev_vdbg(COHC_2_DEV(cohc), "i %d, lli %p, ctrl 0x%x, src 0x%x"
1322                          ", dst 0x%x, link 0x%x virt_link_addr 0x%p\n",
1323                          i, l, l->control, l->src_addr, l->dst_addr,
1324                          l->link_addr, l->virt_link_addr);
1325                 i++;
1326                 l = l->virt_link_addr;
1327         }
1328 }
1329
1330 #ifdef CONFIG_DEBUG_FS
1331
1332 #define COH901318_DEBUGFS_ASSIGN(x, y) (x = y)
1333
1334 static struct coh901318_base *debugfs_dma_base;
1335 static struct dentry *dma_dentry;
1336
1337 static int coh901318_debugfs_read(struct file *file, char __user *buf,
1338                                   size_t count, loff_t *f_pos)
1339 {
1340         u64 started_channels = debugfs_dma_base->pm.started_channels;
1341         int pool_count = debugfs_dma_base->pool.debugfs_pool_counter;
1342         char *dev_buf;
1343         char *tmp;
1344         int ret;
1345         int i;
1346
1347         dev_buf = kmalloc(4*1024, GFP_KERNEL);
1348         if (dev_buf == NULL)
1349                 return -ENOMEM;
1350         tmp = dev_buf;
1351
1352         tmp += sprintf(tmp, "DMA -- enabled dma channels\n");
1353
1354         for (i = 0; i < U300_DMA_CHANNELS; i++)
1355                 if (started_channels & (1 << i))
1356                         tmp += sprintf(tmp, "channel %d\n", i);
1357
1358         tmp += sprintf(tmp, "Pool alloc nbr %d\n", pool_count);
1359
1360         ret = simple_read_from_buffer(buf, count, f_pos, dev_buf, 
1361                                         tmp - dev_buf);
1362         kfree(dev_buf);
1363         return ret;
1364 }
1365
1366 static const struct file_operations coh901318_debugfs_status_operations = {
1367         .owner          = THIS_MODULE,
1368         .open           = simple_open,
1369         .read           = coh901318_debugfs_read,
1370         .llseek         = default_llseek,
1371 };
1372
1373
1374 static int __init init_coh901318_debugfs(void)
1375 {
1376
1377         dma_dentry = debugfs_create_dir("dma", NULL);
1378
1379         (void) debugfs_create_file("status",
1380                                    S_IFREG | S_IRUGO,
1381                                    dma_dentry, NULL,
1382                                    &coh901318_debugfs_status_operations);
1383         return 0;
1384 }
1385
1386 static void __exit exit_coh901318_debugfs(void)
1387 {
1388         debugfs_remove_recursive(dma_dentry);
1389 }
1390
1391 module_init(init_coh901318_debugfs);
1392 module_exit(exit_coh901318_debugfs);
1393 #else
1394
1395 #define COH901318_DEBUGFS_ASSIGN(x, y)
1396
1397 #endif /* CONFIG_DEBUG_FS */
1398
1399 static inline struct coh901318_chan *to_coh901318_chan(struct dma_chan *chan)
1400 {
1401         return container_of(chan, struct coh901318_chan, chan);
1402 }
1403
1404 static inline const struct coh901318_params *
1405 cohc_chan_param(struct coh901318_chan *cohc)
1406 {
1407         return &chan_config[cohc->id].param;
1408 }
1409
1410 static inline const struct coh_dma_channel *
1411 cohc_chan_conf(struct coh901318_chan *cohc)
1412 {
1413         return &chan_config[cohc->id];
1414 }
1415
1416 static void enable_powersave(struct coh901318_chan *cohc)
1417 {
1418         unsigned long flags;
1419         struct powersave *pm = &cohc->base->pm;
1420
1421         spin_lock_irqsave(&pm->lock, flags);
1422
1423         pm->started_channels &= ~(1ULL << cohc->id);
1424
1425         spin_unlock_irqrestore(&pm->lock, flags);
1426 }
1427 static void disable_powersave(struct coh901318_chan *cohc)
1428 {
1429         unsigned long flags;
1430         struct powersave *pm = &cohc->base->pm;
1431
1432         spin_lock_irqsave(&pm->lock, flags);
1433
1434         pm->started_channels |= (1ULL << cohc->id);
1435
1436         spin_unlock_irqrestore(&pm->lock, flags);
1437 }
1438
1439 static inline int coh901318_set_ctrl(struct coh901318_chan *cohc, u32 control)
1440 {
1441         int channel = cohc->id;
1442         void __iomem *virtbase = cohc->base->virtbase;
1443
1444         writel(control,
1445                virtbase + COH901318_CX_CTRL +
1446                COH901318_CX_CTRL_SPACING * channel);
1447         return 0;
1448 }
1449
1450 static inline int coh901318_set_conf(struct coh901318_chan *cohc, u32 conf)
1451 {
1452         int channel = cohc->id;
1453         void __iomem *virtbase = cohc->base->virtbase;
1454
1455         writel(conf,
1456                virtbase + COH901318_CX_CFG +
1457                COH901318_CX_CFG_SPACING*channel);
1458         return 0;
1459 }
1460
1461
1462 static int coh901318_start(struct coh901318_chan *cohc)
1463 {
1464         u32 val;
1465         int channel = cohc->id;
1466         void __iomem *virtbase = cohc->base->virtbase;
1467
1468         disable_powersave(cohc);
1469
1470         val = readl(virtbase + COH901318_CX_CFG +
1471                     COH901318_CX_CFG_SPACING * channel);
1472
1473         /* Enable channel */
1474         val |= COH901318_CX_CFG_CH_ENABLE;
1475         writel(val, virtbase + COH901318_CX_CFG +
1476                COH901318_CX_CFG_SPACING * channel);
1477
1478         return 0;
1479 }
1480
1481 static int coh901318_prep_linked_list(struct coh901318_chan *cohc,
1482                                       struct coh901318_lli *lli)
1483 {
1484         int channel = cohc->id;
1485         void __iomem *virtbase = cohc->base->virtbase;
1486
1487         BUG_ON(readl(virtbase + COH901318_CX_STAT +
1488                      COH901318_CX_STAT_SPACING*channel) &
1489                COH901318_CX_STAT_ACTIVE);
1490
1491         writel(lli->src_addr,
1492                virtbase + COH901318_CX_SRC_ADDR +
1493                COH901318_CX_SRC_ADDR_SPACING * channel);
1494
1495         writel(lli->dst_addr, virtbase +
1496                COH901318_CX_DST_ADDR +
1497                COH901318_CX_DST_ADDR_SPACING * channel);
1498
1499         writel(lli->link_addr, virtbase + COH901318_CX_LNK_ADDR +
1500                COH901318_CX_LNK_ADDR_SPACING * channel);
1501
1502         writel(lli->control, virtbase + COH901318_CX_CTRL +
1503                COH901318_CX_CTRL_SPACING * channel);
1504
1505         return 0;
1506 }
1507
1508 static struct coh901318_desc *
1509 coh901318_desc_get(struct coh901318_chan *cohc)
1510 {
1511         struct coh901318_desc *desc;
1512
1513         if (list_empty(&cohc->free)) {
1514                 /* alloc new desc because we're out of used ones
1515                  * TODO: alloc a pile of descs instead of just one,
1516                  * avoid many small allocations.
1517                  */
1518                 desc = kzalloc(sizeof(struct coh901318_desc), GFP_NOWAIT);
1519                 if (desc == NULL)
1520                         goto out;
1521                 INIT_LIST_HEAD(&desc->node);
1522                 dma_async_tx_descriptor_init(&desc->desc, &cohc->chan);
1523         } else {
1524                 /* Reuse an old desc. */
1525                 desc = list_first_entry(&cohc->free,
1526                                         struct coh901318_desc,
1527                                         node);
1528                 list_del(&desc->node);
1529                 /* Initialize it a bit so it's not insane */
1530                 desc->sg = NULL;
1531                 desc->sg_len = 0;
1532                 desc->desc.callback = NULL;
1533                 desc->desc.callback_param = NULL;
1534         }
1535
1536  out:
1537         return desc;
1538 }
1539
1540 static void
1541 coh901318_desc_free(struct coh901318_chan *cohc, struct coh901318_desc *cohd)
1542 {
1543         list_add_tail(&cohd->node, &cohc->free);
1544 }
1545
1546 /* call with irq lock held */
1547 static void
1548 coh901318_desc_submit(struct coh901318_chan *cohc, struct coh901318_desc *desc)
1549 {
1550         list_add_tail(&desc->node, &cohc->active);
1551 }
1552
1553 static struct coh901318_desc *
1554 coh901318_first_active_get(struct coh901318_chan *cohc)
1555 {
1556         struct coh901318_desc *d;
1557
1558         if (list_empty(&cohc->active))
1559                 return NULL;
1560
1561         d = list_first_entry(&cohc->active,
1562                              struct coh901318_desc,
1563                              node);
1564         return d;
1565 }
1566
1567 static void
1568 coh901318_desc_remove(struct coh901318_desc *cohd)
1569 {
1570         list_del(&cohd->node);
1571 }
1572
1573 static void
1574 coh901318_desc_queue(struct coh901318_chan *cohc, struct coh901318_desc *desc)
1575 {
1576         list_add_tail(&desc->node, &cohc->queue);
1577 }
1578
1579 static struct coh901318_desc *
1580 coh901318_first_queued(struct coh901318_chan *cohc)
1581 {
1582         struct coh901318_desc *d;
1583
1584         if (list_empty(&cohc->queue))
1585                 return NULL;
1586
1587         d = list_first_entry(&cohc->queue,
1588                              struct coh901318_desc,
1589                              node);
1590         return d;
1591 }
1592
1593 static inline u32 coh901318_get_bytes_in_lli(struct coh901318_lli *in_lli)
1594 {
1595         struct coh901318_lli *lli = in_lli;
1596         u32 bytes = 0;
1597
1598         while (lli) {
1599                 bytes += lli->control & COH901318_CX_CTRL_TC_VALUE_MASK;
1600                 lli = lli->virt_link_addr;
1601         }
1602         return bytes;
1603 }
1604
1605 /*
1606  * Get the number of bytes left to transfer on this channel,
1607  * it is unwise to call this before stopping the channel for
1608  * absolute measures, but for a rough guess you can still call
1609  * it.
1610  */
1611 static u32 coh901318_get_bytes_left(struct dma_chan *chan)
1612 {
1613         struct coh901318_chan *cohc = to_coh901318_chan(chan);
1614         struct coh901318_desc *cohd;
1615         struct list_head *pos;
1616         unsigned long flags;
1617         u32 left = 0;
1618         int i = 0;
1619
1620         spin_lock_irqsave(&cohc->lock, flags);
1621
1622         /*
1623          * If there are many queued jobs, we iterate and add the
1624          * size of them all. We take a special look on the first
1625          * job though, since it is probably active.
1626          */
1627         list_for_each(pos, &cohc->active) {
1628                 /*
1629                  * The first job in the list will be working on the
1630                  * hardware. The job can be stopped but still active,
1631                  * so that the transfer counter is somewhere inside
1632                  * the buffer.
1633                  */
1634                 cohd = list_entry(pos, struct coh901318_desc, node);
1635
1636                 if (i == 0) {
1637                         struct coh901318_lli *lli;
1638                         dma_addr_t ladd;
1639
1640                         /* Read current transfer count value */
1641                         left = readl(cohc->base->virtbase +
1642                                      COH901318_CX_CTRL +
1643                                      COH901318_CX_CTRL_SPACING * cohc->id) &
1644                                 COH901318_CX_CTRL_TC_VALUE_MASK;
1645
1646                         /* See if the transfer is linked... */
1647                         ladd = readl(cohc->base->virtbase +
1648                                      COH901318_CX_LNK_ADDR +
1649                                      COH901318_CX_LNK_ADDR_SPACING *
1650                                      cohc->id) &
1651                                 ~COH901318_CX_LNK_LINK_IMMEDIATE;
1652                         /* Single transaction */
1653                         if (!ladd)
1654                                 continue;
1655
1656                         /*
1657                          * Linked transaction, follow the lli, find the
1658                          * currently processing lli, and proceed to the next
1659                          */
1660                         lli = cohd->lli;
1661                         while (lli && lli->link_addr != ladd)
1662                                 lli = lli->virt_link_addr;
1663
1664                         if (lli)
1665                                 lli = lli->virt_link_addr;
1666
1667                         /*
1668                          * Follow remaining lli links around to count the total
1669                          * number of bytes left
1670                          */
1671                         left += coh901318_get_bytes_in_lli(lli);
1672                 } else {
1673                         left += coh901318_get_bytes_in_lli(cohd->lli);
1674                 }
1675                 i++;
1676         }
1677
1678         /* Also count bytes in the queued jobs */
1679         list_for_each(pos, &cohc->queue) {
1680                 cohd = list_entry(pos, struct coh901318_desc, node);
1681                 left += coh901318_get_bytes_in_lli(cohd->lli);
1682         }
1683
1684         spin_unlock_irqrestore(&cohc->lock, flags);
1685
1686         return left;
1687 }
1688
1689 /*
1690  * Pauses a transfer without losing data. Enables power save.
1691  * Use this function in conjunction with coh901318_resume.
1692  */
1693 static int coh901318_pause(struct dma_chan *chan)
1694 {
1695         u32 val;
1696         unsigned long flags;
1697         struct coh901318_chan *cohc = to_coh901318_chan(chan);
1698         int channel = cohc->id;
1699         void __iomem *virtbase = cohc->base->virtbase;
1700
1701         spin_lock_irqsave(&cohc->lock, flags);
1702
1703         /* Disable channel in HW */
1704         val = readl(virtbase + COH901318_CX_CFG +
1705                     COH901318_CX_CFG_SPACING * channel);
1706
1707         /* Stopping infinite transfer */
1708         if ((val & COH901318_CX_CTRL_TC_ENABLE) == 0 &&
1709             (val & COH901318_CX_CFG_CH_ENABLE))
1710                 cohc->stopped = 1;
1711
1712
1713         val &= ~COH901318_CX_CFG_CH_ENABLE;
1714         /* Enable twice, HW bug work around */
1715         writel(val, virtbase + COH901318_CX_CFG +
1716                COH901318_CX_CFG_SPACING * channel);
1717         writel(val, virtbase + COH901318_CX_CFG +
1718                COH901318_CX_CFG_SPACING * channel);
1719
1720         /* Spin-wait for it to actually go inactive */
1721         while (readl(virtbase + COH901318_CX_STAT+COH901318_CX_STAT_SPACING *
1722                      channel) & COH901318_CX_STAT_ACTIVE)
1723                 cpu_relax();
1724
1725         /* Check if we stopped an active job */
1726         if ((readl(virtbase + COH901318_CX_CTRL+COH901318_CX_CTRL_SPACING *
1727                    channel) & COH901318_CX_CTRL_TC_VALUE_MASK) > 0)
1728                 cohc->stopped = 1;
1729
1730         enable_powersave(cohc);
1731
1732         spin_unlock_irqrestore(&cohc->lock, flags);
1733         return 0;
1734 }
1735
1736 /* Resumes a transfer that has been stopped via 300_dma_stop(..).
1737    Power save is handled.
1738 */
1739 static int coh901318_resume(struct dma_chan *chan)
1740 {
1741         u32 val;
1742         unsigned long flags;
1743         struct coh901318_chan *cohc = to_coh901318_chan(chan);
1744         int channel = cohc->id;
1745
1746         spin_lock_irqsave(&cohc->lock, flags);
1747
1748         disable_powersave(cohc);
1749
1750         if (cohc->stopped) {
1751                 /* Enable channel in HW */
1752                 val = readl(cohc->base->virtbase + COH901318_CX_CFG +
1753                             COH901318_CX_CFG_SPACING * channel);
1754
1755                 val |= COH901318_CX_CFG_CH_ENABLE;
1756
1757                 writel(val, cohc->base->virtbase + COH901318_CX_CFG +
1758                        COH901318_CX_CFG_SPACING*channel);
1759
1760                 cohc->stopped = 0;
1761         }
1762
1763         spin_unlock_irqrestore(&cohc->lock, flags);
1764         return 0;
1765 }
1766
1767 bool coh901318_filter_id(struct dma_chan *chan, void *chan_id)
1768 {
1769         unsigned int ch_nr = (unsigned int) chan_id;
1770
1771         if (ch_nr == to_coh901318_chan(chan)->id)
1772                 return true;
1773
1774         return false;
1775 }
1776 EXPORT_SYMBOL(coh901318_filter_id);
1777
1778 struct coh901318_filter_args {
1779         struct coh901318_base *base;
1780         unsigned int ch_nr;
1781 };
1782
1783 static bool coh901318_filter_base_and_id(struct dma_chan *chan, void *data)
1784 {
1785         struct coh901318_filter_args *args = data;
1786
1787         if (&args->base->dma_slave == chan->device &&
1788             args->ch_nr == to_coh901318_chan(chan)->id)
1789                 return true;
1790
1791         return false;
1792 }
1793
1794 static struct dma_chan *coh901318_xlate(struct of_phandle_args *dma_spec,
1795                                         struct of_dma *ofdma)
1796 {
1797         struct coh901318_filter_args args = {
1798                 .base = ofdma->of_dma_data,
1799                 .ch_nr = dma_spec->args[0],
1800         };
1801         dma_cap_mask_t cap;
1802         dma_cap_zero(cap);
1803         dma_cap_set(DMA_SLAVE, cap);
1804
1805         return dma_request_channel(cap, coh901318_filter_base_and_id, &args);
1806 }
1807 /*
1808  * DMA channel allocation
1809  */
1810 static int coh901318_config(struct coh901318_chan *cohc,
1811                             struct coh901318_params *param)
1812 {
1813         const struct coh901318_params *p;
1814         int channel = cohc->id;
1815         void __iomem *virtbase = cohc->base->virtbase;
1816
1817         if (param)
1818                 p = param;
1819         else
1820                 p = cohc_chan_param(cohc);
1821
1822         /* Clear any pending BE or TC interrupt */
1823         if (channel < 32) {
1824                 writel(1 << channel, virtbase + COH901318_BE_INT_CLEAR1);
1825                 writel(1 << channel, virtbase + COH901318_TC_INT_CLEAR1);
1826         } else {
1827                 writel(1 << (channel - 32), virtbase +
1828                        COH901318_BE_INT_CLEAR2);
1829                 writel(1 << (channel - 32), virtbase +
1830                        COH901318_TC_INT_CLEAR2);
1831         }
1832
1833         coh901318_set_conf(cohc, p->config);
1834         coh901318_set_ctrl(cohc, p->ctrl_lli_last);
1835
1836         return 0;
1837 }
1838
1839 /* must lock when calling this function
1840  * start queued jobs, if any
1841  * TODO: start all queued jobs in one go
1842  *
1843  * Returns descriptor if queued job is started otherwise NULL.
1844  * If the queue is empty NULL is returned.
1845  */
1846 static struct coh901318_desc *coh901318_queue_start(struct coh901318_chan *cohc)
1847 {
1848         struct coh901318_desc *cohd;
1849
1850         /*
1851          * start queued jobs, if any
1852          * TODO: transmit all queued jobs in one go
1853          */
1854         cohd = coh901318_first_queued(cohc);
1855
1856         if (cohd != NULL) {
1857                 /* Remove from queue */
1858                 coh901318_desc_remove(cohd);
1859                 /* initiate DMA job */
1860                 cohc->busy = 1;
1861
1862                 coh901318_desc_submit(cohc, cohd);
1863
1864                 /* Program the transaction head */
1865                 coh901318_set_conf(cohc, cohd->head_config);
1866                 coh901318_set_ctrl(cohc, cohd->head_ctrl);
1867                 coh901318_prep_linked_list(cohc, cohd->lli);
1868
1869                 /* start dma job on this channel */
1870                 coh901318_start(cohc);
1871
1872         }
1873
1874         return cohd;
1875 }
1876
1877 /*
1878  * This tasklet is called from the interrupt handler to
1879  * handle each descriptor (DMA job) that is sent to a channel.
1880  */
1881 static void dma_tasklet(unsigned long data)
1882 {
1883         struct coh901318_chan *cohc = (struct coh901318_chan *) data;
1884         struct coh901318_desc *cohd_fin;
1885         unsigned long flags;
1886         dma_async_tx_callback callback;
1887         void *callback_param;
1888
1889         dev_vdbg(COHC_2_DEV(cohc), "[%s] chan_id %d"
1890                  " nbr_active_done %ld\n", __func__,
1891                  cohc->id, cohc->nbr_active_done);
1892
1893         spin_lock_irqsave(&cohc->lock, flags);
1894
1895         /* get first active descriptor entry from list */
1896         cohd_fin = coh901318_first_active_get(cohc);
1897
1898         if (cohd_fin == NULL)
1899                 goto err;
1900
1901         /* locate callback to client */
1902         callback = cohd_fin->desc.callback;
1903         callback_param = cohd_fin->desc.callback_param;
1904
1905         /* sign this job as completed on the channel */
1906         dma_cookie_complete(&cohd_fin->desc);
1907
1908         /* release the lli allocation and remove the descriptor */
1909         coh901318_lli_free(&cohc->base->pool, &cohd_fin->lli);
1910
1911         /* return desc to free-list */
1912         coh901318_desc_remove(cohd_fin);
1913         coh901318_desc_free(cohc, cohd_fin);
1914
1915         spin_unlock_irqrestore(&cohc->lock, flags);
1916
1917         /* Call the callback when we're done */
1918         if (callback)
1919                 callback(callback_param);
1920
1921         spin_lock_irqsave(&cohc->lock, flags);
1922
1923         /*
1924          * If another interrupt fired while the tasklet was scheduling,
1925          * we don't get called twice, so we have this number of active
1926          * counter that keep track of the number of IRQs expected to
1927          * be handled for this channel. If there happen to be more than
1928          * one IRQ to be ack:ed, we simply schedule this tasklet again.
1929          */
1930         cohc->nbr_active_done--;
1931         if (cohc->nbr_active_done) {
1932                 dev_dbg(COHC_2_DEV(cohc), "scheduling tasklet again, new IRQs "
1933                         "came in while we were scheduling this tasklet\n");
1934                 if (cohc_chan_conf(cohc)->priority_high)
1935                         tasklet_hi_schedule(&cohc->tasklet);
1936                 else
1937                         tasklet_schedule(&cohc->tasklet);
1938         }
1939
1940         spin_unlock_irqrestore(&cohc->lock, flags);
1941
1942         return;
1943
1944  err:
1945         spin_unlock_irqrestore(&cohc->lock, flags);
1946         dev_err(COHC_2_DEV(cohc), "[%s] No active dma desc\n", __func__);
1947 }
1948
1949
1950 /* called from interrupt context */
1951 static void dma_tc_handle(struct coh901318_chan *cohc)
1952 {
1953         /*
1954          * If the channel is not allocated, then we shouldn't have
1955          * any TC interrupts on it.
1956          */
1957         if (!cohc->allocated) {
1958                 dev_err(COHC_2_DEV(cohc), "spurious interrupt from "
1959                         "unallocated channel\n");
1960                 return;
1961         }
1962
1963         /*
1964          * When we reach this point, at least one queue item
1965          * should have been moved over from cohc->queue to
1966          * cohc->active and run to completion, that is why we're
1967          * getting a terminal count interrupt is it not?
1968          * If you get this BUG() the most probable cause is that
1969          * the individual nodes in the lli chain have IRQ enabled,
1970          * so check your platform config for lli chain ctrl.
1971          */
1972         BUG_ON(list_empty(&cohc->active));
1973
1974         cohc->nbr_active_done++;
1975
1976         /*
1977          * This attempt to take a job from cohc->queue, put it
1978          * into cohc->active and start it.
1979          */
1980         if (coh901318_queue_start(cohc) == NULL)
1981                 cohc->busy = 0;
1982
1983         /*
1984          * This tasklet will remove items from cohc->active
1985          * and thus terminates them.
1986          */
1987         if (cohc_chan_conf(cohc)->priority_high)
1988                 tasklet_hi_schedule(&cohc->tasklet);
1989         else
1990                 tasklet_schedule(&cohc->tasklet);
1991 }
1992
1993
1994 static irqreturn_t dma_irq_handler(int irq, void *dev_id)
1995 {
1996         u32 status1;
1997         u32 status2;
1998         int i;
1999         int ch;
2000         struct coh901318_base *base  = dev_id;
2001         struct coh901318_chan *cohc;
2002         void __iomem *virtbase = base->virtbase;
2003
2004         status1 = readl(virtbase + COH901318_INT_STATUS1);
2005         status2 = readl(virtbase + COH901318_INT_STATUS2);
2006
2007         if (unlikely(status1 == 0 && status2 == 0)) {
2008                 dev_warn(base->dev, "spurious DMA IRQ from no channel!\n");
2009                 return IRQ_HANDLED;
2010         }
2011
2012         /* TODO: consider handle IRQ in tasklet here to
2013          *       minimize interrupt latency */
2014
2015         /* Check the first 32 DMA channels for IRQ */
2016         while (status1) {
2017                 /* Find first bit set, return as a number. */
2018                 i = ffs(status1) - 1;
2019                 ch = i;
2020
2021                 cohc = &base->chans[ch];
2022                 spin_lock(&cohc->lock);
2023
2024                 /* Mask off this bit */
2025                 status1 &= ~(1 << i);
2026                 /* Check the individual channel bits */
2027                 if (test_bit(i, virtbase + COH901318_BE_INT_STATUS1)) {
2028                         dev_crit(COHC_2_DEV(cohc),
2029                                  "DMA bus error on channel %d!\n", ch);
2030                         BUG_ON(1);
2031                         /* Clear BE interrupt */
2032                         __set_bit(i, virtbase + COH901318_BE_INT_CLEAR1);
2033                 } else {
2034                         /* Caused by TC, really? */
2035                         if (unlikely(!test_bit(i, virtbase +
2036                                                COH901318_TC_INT_STATUS1))) {
2037                                 dev_warn(COHC_2_DEV(cohc),
2038                                          "ignoring interrupt not caused by terminal count on channel %d\n", ch);
2039                                 /* Clear TC interrupt */
2040                                 BUG_ON(1);
2041                                 __set_bit(i, virtbase + COH901318_TC_INT_CLEAR1);
2042                         } else {
2043                                 /* Enable powersave if transfer has finished */
2044                                 if (!(readl(virtbase + COH901318_CX_STAT +
2045                                             COH901318_CX_STAT_SPACING*ch) &
2046                                       COH901318_CX_STAT_ENABLED)) {
2047                                         enable_powersave(cohc);
2048                                 }
2049
2050                                 /* Must clear TC interrupt before calling
2051                                  * dma_tc_handle
2052                                  * in case tc_handle initiate a new dma job
2053                                  */
2054                                 __set_bit(i, virtbase + COH901318_TC_INT_CLEAR1);
2055
2056                                 dma_tc_handle(cohc);
2057                         }
2058                 }
2059                 spin_unlock(&cohc->lock);
2060         }
2061
2062         /* Check the remaining 32 DMA channels for IRQ */
2063         while (status2) {
2064                 /* Find first bit set, return as a number. */
2065                 i = ffs(status2) - 1;
2066                 ch = i + 32;
2067                 cohc = &base->chans[ch];
2068                 spin_lock(&cohc->lock);
2069
2070                 /* Mask off this bit */
2071                 status2 &= ~(1 << i);
2072                 /* Check the individual channel bits */
2073                 if (test_bit(i, virtbase + COH901318_BE_INT_STATUS2)) {
2074                         dev_crit(COHC_2_DEV(cohc),
2075                                  "DMA bus error on channel %d!\n", ch);
2076                         /* Clear BE interrupt */
2077                         BUG_ON(1);
2078                         __set_bit(i, virtbase + COH901318_BE_INT_CLEAR2);
2079                 } else {
2080                         /* Caused by TC, really? */
2081                         if (unlikely(!test_bit(i, virtbase +
2082                                                COH901318_TC_INT_STATUS2))) {
2083                                 dev_warn(COHC_2_DEV(cohc),
2084                                          "ignoring interrupt not caused by terminal count on channel %d\n", ch);
2085                                 /* Clear TC interrupt */
2086                                 __set_bit(i, virtbase + COH901318_TC_INT_CLEAR2);
2087                                 BUG_ON(1);
2088                         } else {
2089                                 /* Enable powersave if transfer has finished */
2090                                 if (!(readl(virtbase + COH901318_CX_STAT +
2091                                             COH901318_CX_STAT_SPACING*ch) &
2092                                       COH901318_CX_STAT_ENABLED)) {
2093                                         enable_powersave(cohc);
2094                                 }
2095                                 /* Must clear TC interrupt before calling
2096                                  * dma_tc_handle
2097                                  * in case tc_handle initiate a new dma job
2098                                  */
2099                                 __set_bit(i, virtbase + COH901318_TC_INT_CLEAR2);
2100
2101                                 dma_tc_handle(cohc);
2102                         }
2103                 }
2104                 spin_unlock(&cohc->lock);
2105         }
2106
2107         return IRQ_HANDLED;
2108 }
2109
2110 static int coh901318_terminate_all(struct dma_chan *chan)
2111 {
2112         unsigned long flags;
2113         struct coh901318_chan *cohc = to_coh901318_chan(chan);
2114         struct coh901318_desc *cohd;
2115         void __iomem *virtbase = cohc->base->virtbase;
2116
2117         /* The remainder of this function terminates the transfer */
2118         coh901318_pause(chan);
2119         spin_lock_irqsave(&cohc->lock, flags);
2120
2121         /* Clear any pending BE or TC interrupt */
2122         if (cohc->id < 32) {
2123                 writel(1 << cohc->id, virtbase + COH901318_BE_INT_CLEAR1);
2124                 writel(1 << cohc->id, virtbase + COH901318_TC_INT_CLEAR1);
2125         } else {
2126                 writel(1 << (cohc->id - 32), virtbase +
2127                        COH901318_BE_INT_CLEAR2);
2128                 writel(1 << (cohc->id - 32), virtbase +
2129                        COH901318_TC_INT_CLEAR2);
2130         }
2131
2132         enable_powersave(cohc);
2133
2134         while ((cohd = coh901318_first_active_get(cohc))) {
2135                 /* release the lli allocation*/
2136                 coh901318_lli_free(&cohc->base->pool, &cohd->lli);
2137
2138                 /* return desc to free-list */
2139                 coh901318_desc_remove(cohd);
2140                 coh901318_desc_free(cohc, cohd);
2141         }
2142
2143         while ((cohd = coh901318_first_queued(cohc))) {
2144                 /* release the lli allocation*/
2145                 coh901318_lli_free(&cohc->base->pool, &cohd->lli);
2146
2147                 /* return desc to free-list */
2148                 coh901318_desc_remove(cohd);
2149                 coh901318_desc_free(cohc, cohd);
2150         }
2151
2152
2153         cohc->nbr_active_done = 0;
2154         cohc->busy = 0;
2155
2156         spin_unlock_irqrestore(&cohc->lock, flags);
2157
2158         return 0;
2159 }
2160
2161 static int coh901318_alloc_chan_resources(struct dma_chan *chan)
2162 {
2163         struct coh901318_chan   *cohc = to_coh901318_chan(chan);
2164         unsigned long flags;
2165
2166         dev_vdbg(COHC_2_DEV(cohc), "[%s] DMA channel %d\n",
2167                  __func__, cohc->id);
2168
2169         if (chan->client_count > 1)
2170                 return -EBUSY;
2171
2172         spin_lock_irqsave(&cohc->lock, flags);
2173
2174         coh901318_config(cohc, NULL);
2175
2176         cohc->allocated = 1;
2177         dma_cookie_init(chan);
2178
2179         spin_unlock_irqrestore(&cohc->lock, flags);
2180
2181         return 1;
2182 }
2183
2184 static void
2185 coh901318_free_chan_resources(struct dma_chan *chan)
2186 {
2187         struct coh901318_chan   *cohc = to_coh901318_chan(chan);
2188         int channel = cohc->id;
2189         unsigned long flags;
2190
2191         spin_lock_irqsave(&cohc->lock, flags);
2192
2193         /* Disable HW */
2194         writel(0x00000000U, cohc->base->virtbase + COH901318_CX_CFG +
2195                COH901318_CX_CFG_SPACING*channel);
2196         writel(0x00000000U, cohc->base->virtbase + COH901318_CX_CTRL +
2197                COH901318_CX_CTRL_SPACING*channel);
2198
2199         cohc->allocated = 0;
2200
2201         spin_unlock_irqrestore(&cohc->lock, flags);
2202
2203         coh901318_terminate_all(chan);
2204 }
2205
2206
2207 static dma_cookie_t
2208 coh901318_tx_submit(struct dma_async_tx_descriptor *tx)
2209 {
2210         struct coh901318_desc *cohd = container_of(tx, struct coh901318_desc,
2211                                                    desc);
2212         struct coh901318_chan *cohc = to_coh901318_chan(tx->chan);
2213         unsigned long flags;
2214         dma_cookie_t cookie;
2215
2216         spin_lock_irqsave(&cohc->lock, flags);
2217         cookie = dma_cookie_assign(tx);
2218
2219         coh901318_desc_queue(cohc, cohd);
2220
2221         spin_unlock_irqrestore(&cohc->lock, flags);
2222
2223         return cookie;
2224 }
2225
2226 static struct dma_async_tx_descriptor *
2227 coh901318_prep_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
2228                       size_t size, unsigned long flags)
2229 {
2230         struct coh901318_lli *lli;
2231         struct coh901318_desc *cohd;
2232         unsigned long flg;
2233         struct coh901318_chan *cohc = to_coh901318_chan(chan);
2234         int lli_len;
2235         u32 ctrl_last = cohc_chan_param(cohc)->ctrl_lli_last;
2236         int ret;
2237
2238         spin_lock_irqsave(&cohc->lock, flg);
2239
2240         dev_vdbg(COHC_2_DEV(cohc),
2241                  "[%s] channel %d src 0x%x dest 0x%x size %d\n",
2242                  __func__, cohc->id, src, dest, size);
2243
2244         if (flags & DMA_PREP_INTERRUPT)
2245                 /* Trigger interrupt after last lli */
2246                 ctrl_last |= COH901318_CX_CTRL_TC_IRQ_ENABLE;
2247
2248         lli_len = size >> MAX_DMA_PACKET_SIZE_SHIFT;
2249         if ((lli_len << MAX_DMA_PACKET_SIZE_SHIFT) < size)
2250                 lli_len++;
2251
2252         lli = coh901318_lli_alloc(&cohc->base->pool, lli_len);
2253
2254         if (lli == NULL)
2255                 goto err;
2256
2257         ret = coh901318_lli_fill_memcpy(
2258                 &cohc->base->pool, lli, src, size, dest,
2259                 cohc_chan_param(cohc)->ctrl_lli_chained,
2260                 ctrl_last);
2261         if (ret)
2262                 goto err;
2263
2264         COH_DBG(coh901318_list_print(cohc, lli));
2265
2266         /* Pick a descriptor to handle this transfer */
2267         cohd = coh901318_desc_get(cohc);
2268         cohd->lli = lli;
2269         cohd->flags = flags;
2270         cohd->desc.tx_submit = coh901318_tx_submit;
2271
2272         spin_unlock_irqrestore(&cohc->lock, flg);
2273
2274         return &cohd->desc;
2275  err:
2276         spin_unlock_irqrestore(&cohc->lock, flg);
2277         return NULL;
2278 }
2279
2280 static struct dma_async_tx_descriptor *
2281 coh901318_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2282                         unsigned int sg_len, enum dma_transfer_direction direction,
2283                         unsigned long flags, void *context)
2284 {
2285         struct coh901318_chan *cohc = to_coh901318_chan(chan);
2286         struct coh901318_lli *lli;
2287         struct coh901318_desc *cohd;
2288         const struct coh901318_params *params;
2289         struct scatterlist *sg;
2290         int len = 0;
2291         int size;
2292         int i;
2293         u32 ctrl_chained = cohc_chan_param(cohc)->ctrl_lli_chained;
2294         u32 ctrl = cohc_chan_param(cohc)->ctrl_lli;
2295         u32 ctrl_last = cohc_chan_param(cohc)->ctrl_lli_last;
2296         u32 config;
2297         unsigned long flg;
2298         int ret;
2299
2300         if (!sgl)
2301                 goto out;
2302         if (sg_dma_len(sgl) == 0)
2303                 goto out;
2304
2305         spin_lock_irqsave(&cohc->lock, flg);
2306
2307         dev_vdbg(COHC_2_DEV(cohc), "[%s] sg_len %d dir %d\n",
2308                  __func__, sg_len, direction);
2309
2310         if (flags & DMA_PREP_INTERRUPT)
2311                 /* Trigger interrupt after last lli */
2312                 ctrl_last |= COH901318_CX_CTRL_TC_IRQ_ENABLE;
2313
2314         params = cohc_chan_param(cohc);
2315         config = params->config;
2316         /*
2317          * Add runtime-specific control on top, make
2318          * sure the bits you set per peripheral channel are
2319          * cleared in the default config from the platform.
2320          */
2321         ctrl_chained |= cohc->ctrl;
2322         ctrl_last |= cohc->ctrl;
2323         ctrl |= cohc->ctrl;
2324
2325         if (direction == DMA_MEM_TO_DEV) {
2326                 u32 tx_flags = COH901318_CX_CTRL_PRDD_SOURCE |
2327                         COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE;
2328
2329                 config |= COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY;
2330                 ctrl_chained |= tx_flags;
2331                 ctrl_last |= tx_flags;
2332                 ctrl |= tx_flags;
2333         } else if (direction == DMA_DEV_TO_MEM) {
2334                 u32 rx_flags = COH901318_CX_CTRL_PRDD_DEST |
2335                         COH901318_CX_CTRL_DST_ADDR_INC_ENABLE;
2336
2337                 config |= COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY;
2338                 ctrl_chained |= rx_flags;
2339                 ctrl_last |= rx_flags;
2340                 ctrl |= rx_flags;
2341         } else
2342                 goto err_direction;
2343
2344         /* The dma only supports transmitting packages up to
2345          * MAX_DMA_PACKET_SIZE. Calculate to total number of
2346          * dma elemts required to send the entire sg list
2347          */
2348         for_each_sg(sgl, sg, sg_len, i) {
2349                 unsigned int factor;
2350                 size = sg_dma_len(sg);
2351
2352                 if (size <= MAX_DMA_PACKET_SIZE) {
2353                         len++;
2354                         continue;
2355                 }
2356
2357                 factor = size >> MAX_DMA_PACKET_SIZE_SHIFT;
2358                 if ((factor << MAX_DMA_PACKET_SIZE_SHIFT) < size)
2359                         factor++;
2360
2361                 len += factor;
2362         }
2363
2364         pr_debug("Allocate %d lli:s for this transfer\n", len);
2365         lli = coh901318_lli_alloc(&cohc->base->pool, len);
2366
2367         if (lli == NULL)
2368                 goto err_dma_alloc;
2369
2370         /* initiate allocated lli list */
2371         ret = coh901318_lli_fill_sg(&cohc->base->pool, lli, sgl, sg_len,
2372                                     cohc->addr,
2373                                     ctrl_chained,
2374                                     ctrl,
2375                                     ctrl_last,
2376                                     direction, COH901318_CX_CTRL_TC_IRQ_ENABLE);
2377         if (ret)
2378                 goto err_lli_fill;
2379
2380
2381         COH_DBG(coh901318_list_print(cohc, lli));
2382
2383         /* Pick a descriptor to handle this transfer */
2384         cohd = coh901318_desc_get(cohc);
2385         cohd->head_config = config;
2386         /*
2387          * Set the default head ctrl for the channel to the one from the
2388          * lli, things may have changed due to odd buffer alignment
2389          * etc.
2390          */
2391         cohd->head_ctrl = lli->control;
2392         cohd->dir = direction;
2393         cohd->flags = flags;
2394         cohd->desc.tx_submit = coh901318_tx_submit;
2395         cohd->lli = lli;
2396
2397         spin_unlock_irqrestore(&cohc->lock, flg);
2398
2399         return &cohd->desc;
2400  err_lli_fill:
2401  err_dma_alloc:
2402  err_direction:
2403         spin_unlock_irqrestore(&cohc->lock, flg);
2404  out:
2405         return NULL;
2406 }
2407
2408 static enum dma_status
2409 coh901318_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
2410                  struct dma_tx_state *txstate)
2411 {
2412         struct coh901318_chan *cohc = to_coh901318_chan(chan);
2413         enum dma_status ret;
2414
2415         ret = dma_cookie_status(chan, cookie, txstate);
2416         if (ret == DMA_COMPLETE)
2417                 return ret;
2418
2419         dma_set_residue(txstate, coh901318_get_bytes_left(chan));
2420
2421         if (ret == DMA_IN_PROGRESS && cohc->stopped)
2422                 ret = DMA_PAUSED;
2423
2424         return ret;
2425 }
2426
2427 static void
2428 coh901318_issue_pending(struct dma_chan *chan)
2429 {
2430         struct coh901318_chan *cohc = to_coh901318_chan(chan);
2431         unsigned long flags;
2432
2433         spin_lock_irqsave(&cohc->lock, flags);
2434
2435         /*
2436          * Busy means that pending jobs are already being processed,
2437          * and then there is no point in starting the queue: the
2438          * terminal count interrupt on the channel will take the next
2439          * job on the queue and execute it anyway.
2440          */
2441         if (!cohc->busy)
2442                 coh901318_queue_start(cohc);
2443
2444         spin_unlock_irqrestore(&cohc->lock, flags);
2445 }
2446
2447 /*
2448  * Here we wrap in the runtime dma control interface
2449  */
2450 struct burst_table {
2451         int burst_8bit;
2452         int burst_16bit;
2453         int burst_32bit;
2454         u32 reg;
2455 };
2456
2457 static const struct burst_table burst_sizes[] = {
2458         {
2459                 .burst_8bit = 64,
2460                 .burst_16bit = 32,
2461                 .burst_32bit = 16,
2462                 .reg = COH901318_CX_CTRL_BURST_COUNT_64_BYTES,
2463         },
2464         {
2465                 .burst_8bit = 48,
2466                 .burst_16bit = 24,
2467                 .burst_32bit = 12,
2468                 .reg = COH901318_CX_CTRL_BURST_COUNT_48_BYTES,
2469         },
2470         {
2471                 .burst_8bit = 32,
2472                 .burst_16bit = 16,
2473                 .burst_32bit = 8,
2474                 .reg = COH901318_CX_CTRL_BURST_COUNT_32_BYTES,
2475         },
2476         {
2477                 .burst_8bit = 16,
2478                 .burst_16bit = 8,
2479                 .burst_32bit = 4,
2480                 .reg = COH901318_CX_CTRL_BURST_COUNT_16_BYTES,
2481         },
2482         {
2483                 .burst_8bit = 8,
2484                 .burst_16bit = 4,
2485                 .burst_32bit = 2,
2486                 .reg = COH901318_CX_CTRL_BURST_COUNT_8_BYTES,
2487         },
2488         {
2489                 .burst_8bit = 4,
2490                 .burst_16bit = 2,
2491                 .burst_32bit = 1,
2492                 .reg = COH901318_CX_CTRL_BURST_COUNT_4_BYTES,
2493         },
2494         {
2495                 .burst_8bit = 2,
2496                 .burst_16bit = 1,
2497                 .burst_32bit = 0,
2498                 .reg = COH901318_CX_CTRL_BURST_COUNT_2_BYTES,
2499         },
2500         {
2501                 .burst_8bit = 1,
2502                 .burst_16bit = 0,
2503                 .burst_32bit = 0,
2504                 .reg = COH901318_CX_CTRL_BURST_COUNT_1_BYTE,
2505         },
2506 };
2507
2508 static int coh901318_dma_set_runtimeconfig(struct dma_chan *chan,
2509                                            struct dma_slave_config *config)
2510 {
2511         struct coh901318_chan *cohc = to_coh901318_chan(chan);
2512         dma_addr_t addr;
2513         enum dma_slave_buswidth addr_width;
2514         u32 maxburst;
2515         u32 ctrl = 0;
2516         int i = 0;
2517
2518         /* We only support mem to per or per to mem transfers */
2519         if (config->direction == DMA_DEV_TO_MEM) {
2520                 addr = config->src_addr;
2521                 addr_width = config->src_addr_width;
2522                 maxburst = config->src_maxburst;
2523         } else if (config->direction == DMA_MEM_TO_DEV) {
2524                 addr = config->dst_addr;
2525                 addr_width = config->dst_addr_width;
2526                 maxburst = config->dst_maxburst;
2527         } else {
2528                 dev_err(COHC_2_DEV(cohc), "illegal channel mode\n");
2529                 return -EINVAL;
2530         }
2531
2532         dev_dbg(COHC_2_DEV(cohc), "configure channel for %d byte transfers\n",
2533                 addr_width);
2534         switch (addr_width)  {
2535         case DMA_SLAVE_BUSWIDTH_1_BYTE:
2536                 ctrl |=
2537                         COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS |
2538                         COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS;
2539
2540                 while (i < ARRAY_SIZE(burst_sizes)) {
2541                         if (burst_sizes[i].burst_8bit <= maxburst)
2542                                 break;
2543                         i++;
2544                 }
2545
2546                 break;
2547         case DMA_SLAVE_BUSWIDTH_2_BYTES:
2548                 ctrl |=
2549                         COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS |
2550                         COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS;
2551
2552                 while (i < ARRAY_SIZE(burst_sizes)) {
2553                         if (burst_sizes[i].burst_16bit <= maxburst)
2554                                 break;
2555                         i++;
2556                 }
2557
2558                 break;
2559         case DMA_SLAVE_BUSWIDTH_4_BYTES:
2560                 /* Direction doesn't matter here, it's 32/32 bits */
2561                 ctrl |=
2562                         COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
2563                         COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS;
2564
2565                 while (i < ARRAY_SIZE(burst_sizes)) {
2566                         if (burst_sizes[i].burst_32bit <= maxburst)
2567                                 break;
2568                         i++;
2569                 }
2570
2571                 break;
2572         default:
2573                 dev_err(COHC_2_DEV(cohc),
2574                         "bad runtimeconfig: alien address width\n");
2575                 return -EINVAL;
2576         }
2577
2578         ctrl |= burst_sizes[i].reg;
2579         dev_dbg(COHC_2_DEV(cohc),
2580                 "selected burst size %d bytes for address width %d bytes, maxburst %d\n",
2581                 burst_sizes[i].burst_8bit, addr_width, maxburst);
2582
2583         cohc->addr = addr;
2584         cohc->ctrl = ctrl;
2585
2586         return 0;
2587 }
2588
2589 static void coh901318_base_init(struct dma_device *dma, const int *pick_chans,
2590                                 struct coh901318_base *base)
2591 {
2592         int chans_i;
2593         int i = 0;
2594         struct coh901318_chan *cohc;
2595
2596         INIT_LIST_HEAD(&dma->channels);
2597
2598         for (chans_i = 0; pick_chans[chans_i] != -1; chans_i += 2) {
2599                 for (i = pick_chans[chans_i]; i <= pick_chans[chans_i+1]; i++) {
2600                         cohc = &base->chans[i];
2601
2602                         cohc->base = base;
2603                         cohc->chan.device = dma;
2604                         cohc->id = i;
2605
2606                         /* TODO: do we really need this lock if only one
2607                          * client is connected to each channel?
2608                          */
2609
2610                         spin_lock_init(&cohc->lock);
2611
2612                         cohc->nbr_active_done = 0;
2613                         cohc->busy = 0;
2614                         INIT_LIST_HEAD(&cohc->free);
2615                         INIT_LIST_HEAD(&cohc->active);
2616                         INIT_LIST_HEAD(&cohc->queue);
2617
2618                         tasklet_init(&cohc->tasklet, dma_tasklet,
2619                                      (unsigned long) cohc);
2620
2621                         list_add_tail(&cohc->chan.device_node,
2622                                       &dma->channels);
2623                 }
2624         }
2625 }
2626
2627 static int __init coh901318_probe(struct platform_device *pdev)
2628 {
2629         int err = 0;
2630         struct coh901318_base *base;
2631         int irq;
2632         struct resource *io;
2633
2634         io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
2635         if (!io)
2636                 return -ENODEV;
2637
2638         /* Map DMA controller registers to virtual memory */
2639         if (devm_request_mem_region(&pdev->dev,
2640                                     io->start,
2641                                     resource_size(io),
2642                                     pdev->dev.driver->name) == NULL)
2643                 return -ENOMEM;
2644
2645         base = devm_kzalloc(&pdev->dev,
2646                             ALIGN(sizeof(struct coh901318_base), 4) +
2647                             U300_DMA_CHANNELS *
2648                             sizeof(struct coh901318_chan),
2649                             GFP_KERNEL);
2650         if (!base)
2651                 return -ENOMEM;
2652
2653         base->chans = ((void *)base) + ALIGN(sizeof(struct coh901318_base), 4);
2654
2655         base->virtbase = devm_ioremap(&pdev->dev, io->start, resource_size(io));
2656         if (!base->virtbase)
2657                 return -ENOMEM;
2658
2659         base->dev = &pdev->dev;
2660         spin_lock_init(&base->pm.lock);
2661         base->pm.started_channels = 0;
2662
2663         COH901318_DEBUGFS_ASSIGN(debugfs_dma_base, base);
2664
2665         irq = platform_get_irq(pdev, 0);
2666         if (irq < 0)
2667                 return irq;
2668
2669         err = devm_request_irq(&pdev->dev, irq, dma_irq_handler, 0,
2670                                "coh901318", base);
2671         if (err)
2672                 return err;
2673
2674         err = coh901318_pool_create(&base->pool, &pdev->dev,
2675                                     sizeof(struct coh901318_lli),
2676                                     32);
2677         if (err)
2678                 return err;
2679
2680         /* init channels for device transfers */
2681         coh901318_base_init(&base->dma_slave, dma_slave_channels,
2682                             base);
2683
2684         dma_cap_zero(base->dma_slave.cap_mask);
2685         dma_cap_set(DMA_SLAVE, base->dma_slave.cap_mask);
2686
2687         base->dma_slave.device_alloc_chan_resources = coh901318_alloc_chan_resources;
2688         base->dma_slave.device_free_chan_resources = coh901318_free_chan_resources;
2689         base->dma_slave.device_prep_slave_sg = coh901318_prep_slave_sg;
2690         base->dma_slave.device_tx_status = coh901318_tx_status;
2691         base->dma_slave.device_issue_pending = coh901318_issue_pending;
2692         base->dma_slave.device_config = coh901318_dma_set_runtimeconfig;
2693         base->dma_slave.device_pause = coh901318_pause;
2694         base->dma_slave.device_resume = coh901318_resume;
2695         base->dma_slave.device_terminate_all = coh901318_terminate_all;
2696         base->dma_slave.dev = &pdev->dev;
2697
2698         err = dma_async_device_register(&base->dma_slave);
2699
2700         if (err)
2701                 goto err_register_slave;
2702
2703         /* init channels for memcpy */
2704         coh901318_base_init(&base->dma_memcpy, dma_memcpy_channels,
2705                             base);
2706
2707         dma_cap_zero(base->dma_memcpy.cap_mask);
2708         dma_cap_set(DMA_MEMCPY, base->dma_memcpy.cap_mask);
2709
2710         base->dma_memcpy.device_alloc_chan_resources = coh901318_alloc_chan_resources;
2711         base->dma_memcpy.device_free_chan_resources = coh901318_free_chan_resources;
2712         base->dma_memcpy.device_prep_dma_memcpy = coh901318_prep_memcpy;
2713         base->dma_memcpy.device_tx_status = coh901318_tx_status;
2714         base->dma_memcpy.device_issue_pending = coh901318_issue_pending;
2715         base->dma_memcpy.device_config = coh901318_dma_set_runtimeconfig;
2716         base->dma_memcpy.device_pause = coh901318_pause;
2717         base->dma_memcpy.device_resume = coh901318_resume;
2718         base->dma_memcpy.device_terminate_all = coh901318_terminate_all;
2719         base->dma_memcpy.dev = &pdev->dev;
2720         /*
2721          * This controller can only access address at even 32bit boundaries,
2722          * i.e. 2^2
2723          */
2724         base->dma_memcpy.copy_align = DMAENGINE_ALIGN_4_BYTES;
2725         err = dma_async_device_register(&base->dma_memcpy);
2726
2727         if (err)
2728                 goto err_register_memcpy;
2729
2730         err = of_dma_controller_register(pdev->dev.of_node, coh901318_xlate,
2731                                          base);
2732         if (err)
2733                 goto err_register_of_dma;
2734
2735         platform_set_drvdata(pdev, base);
2736         dev_info(&pdev->dev, "Initialized COH901318 DMA on virtual base 0x%08x\n",
2737                 (u32) base->virtbase);
2738
2739         return err;
2740
2741  err_register_of_dma:
2742         dma_async_device_unregister(&base->dma_memcpy);
2743  err_register_memcpy:
2744         dma_async_device_unregister(&base->dma_slave);
2745  err_register_slave:
2746         coh901318_pool_destroy(&base->pool);
2747         return err;
2748 }
2749
2750 static int coh901318_remove(struct platform_device *pdev)
2751 {
2752         struct coh901318_base *base = platform_get_drvdata(pdev);
2753
2754         of_dma_controller_free(pdev->dev.of_node);
2755         dma_async_device_unregister(&base->dma_memcpy);
2756         dma_async_device_unregister(&base->dma_slave);
2757         coh901318_pool_destroy(&base->pool);
2758         return 0;
2759 }
2760
2761 static const struct of_device_id coh901318_dt_match[] = {
2762         { .compatible = "stericsson,coh901318" },
2763         {},
2764 };
2765
2766 static struct platform_driver coh901318_driver = {
2767         .remove = coh901318_remove,
2768         .driver = {
2769                 .name   = "coh901318",
2770                 .of_match_table = coh901318_dt_match,
2771         },
2772 };
2773
2774 int __init coh901318_init(void)
2775 {
2776         return platform_driver_probe(&coh901318_driver, coh901318_probe);
2777 }
2778 subsys_initcall(coh901318_init);
2779
2780 void __exit coh901318_exit(void)
2781 {
2782         platform_driver_unregister(&coh901318_driver);
2783 }
2784 module_exit(coh901318_exit);
2785
2786 MODULE_LICENSE("GPL");
2787 MODULE_AUTHOR("Per Friden");