GNU Linux-libre 5.19-rc6-gnu
[releases.git] / drivers / cpufreq / longhaul.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  (C) 2001-2004  Dave Jones.
4  *  (C) 2002  Padraig Brady. <padraig@antefacto.com>
5  *
6  *  Based upon datasheets & sample CPUs kindly provided by VIA.
7  *
8  *  VIA have currently 3 different versions of Longhaul.
9  *  Version 1 (Longhaul) uses the BCR2 MSR at 0x1147.
10  *   It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0.
11  *  Version 2 of longhaul is backward compatible with v1, but adds
12  *   LONGHAUL MSR for purpose of both frequency and voltage scaling.
13  *   Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C).
14  *  Version 3 of longhaul got renamed to Powersaver and redesigned
15  *   to use only the POWERSAVER MSR at 0x110a.
16  *   It is present in Ezra-T (C5M), Nehemiah (C5X) and above.
17  *   It's pretty much the same feature wise to longhaul v2, though
18  *   there is provision for scaling FSB too, but this doesn't work
19  *   too well in practice so we don't even try to use this.
20  *
21  *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
22  */
23
24 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
25
26 #include <linux/kernel.h>
27 #include <linux/module.h>
28 #include <linux/moduleparam.h>
29 #include <linux/init.h>
30 #include <linux/cpufreq.h>
31 #include <linux/pci.h>
32 #include <linux/slab.h>
33 #include <linux/string.h>
34 #include <linux/delay.h>
35 #include <linux/timex.h>
36 #include <linux/io.h>
37 #include <linux/acpi.h>
38
39 #include <asm/msr.h>
40 #include <asm/cpu_device_id.h>
41 #include <acpi/processor.h>
42
43 #include "longhaul.h"
44
45 #define TYPE_LONGHAUL_V1        1
46 #define TYPE_LONGHAUL_V2        2
47 #define TYPE_POWERSAVER         3
48
49 #define CPU_SAMUEL      1
50 #define CPU_SAMUEL2     2
51 #define CPU_EZRA        3
52 #define CPU_EZRA_T      4
53 #define CPU_NEHEMIAH    5
54 #define CPU_NEHEMIAH_C  6
55
56 /* Flags */
57 #define USE_ACPI_C3             (1 << 1)
58 #define USE_NORTHBRIDGE         (1 << 2)
59
60 static int cpu_model;
61 static unsigned int numscales = 16;
62 static unsigned int fsb;
63
64 static const struct mV_pos *vrm_mV_table;
65 static const unsigned char *mV_vrm_table;
66
67 static unsigned int highest_speed, lowest_speed; /* kHz */
68 static unsigned int minmult, maxmult;
69 static int can_scale_voltage;
70 static struct acpi_processor *pr;
71 static struct acpi_processor_cx *cx;
72 static u32 acpi_regs_addr;
73 static u8 longhaul_flags;
74 static unsigned int longhaul_index;
75
76 /* Module parameters */
77 static int scale_voltage;
78 static int disable_acpi_c3;
79 static int revid_errata;
80 static int enable;
81
82 /* Clock ratios multiplied by 10 */
83 static int mults[32];
84 static int eblcr[32];
85 static int longhaul_version;
86 static struct cpufreq_frequency_table *longhaul_table;
87
88 static char speedbuffer[8];
89
90 static char *print_speed(int speed)
91 {
92         if (speed < 1000) {
93                 snprintf(speedbuffer, sizeof(speedbuffer), "%dMHz", speed);
94                 return speedbuffer;
95         }
96
97         if (speed%1000 == 0)
98                 snprintf(speedbuffer, sizeof(speedbuffer),
99                         "%dGHz", speed/1000);
100         else
101                 snprintf(speedbuffer, sizeof(speedbuffer),
102                         "%d.%dGHz", speed/1000, (speed%1000)/100);
103
104         return speedbuffer;
105 }
106
107
108 static unsigned int calc_speed(int mult)
109 {
110         int khz;
111         khz = (mult/10)*fsb;
112         if (mult%10)
113                 khz += fsb/2;
114         khz *= 1000;
115         return khz;
116 }
117
118
119 static int longhaul_get_cpu_mult(void)
120 {
121         unsigned long invalue = 0, lo, hi;
122
123         rdmsr(MSR_IA32_EBL_CR_POWERON, lo, hi);
124         invalue = (lo & (1<<22|1<<23|1<<24|1<<25))>>22;
125         if (longhaul_version == TYPE_LONGHAUL_V2 ||
126             longhaul_version == TYPE_POWERSAVER) {
127                 if (lo & (1<<27))
128                         invalue += 16;
129         }
130         return eblcr[invalue];
131 }
132
133 /* For processor with BCR2 MSR */
134
135 static void do_longhaul1(unsigned int mults_index)
136 {
137         union msr_bcr2 bcr2;
138
139         rdmsrl(MSR_VIA_BCR2, bcr2.val);
140         /* Enable software clock multiplier */
141         bcr2.bits.ESOFTBF = 1;
142         bcr2.bits.CLOCKMUL = mults_index & 0xff;
143
144         /* Sync to timer tick */
145         safe_halt();
146         /* Change frequency on next halt or sleep */
147         wrmsrl(MSR_VIA_BCR2, bcr2.val);
148         /* Invoke transition */
149         ACPI_FLUSH_CPU_CACHE();
150         halt();
151
152         /* Disable software clock multiplier */
153         local_irq_disable();
154         rdmsrl(MSR_VIA_BCR2, bcr2.val);
155         bcr2.bits.ESOFTBF = 0;
156         wrmsrl(MSR_VIA_BCR2, bcr2.val);
157 }
158
159 /* For processor with Longhaul MSR */
160
161 static void do_powersaver(int cx_address, unsigned int mults_index,
162                           unsigned int dir)
163 {
164         union msr_longhaul longhaul;
165         u32 t;
166
167         rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
168         /* Setup new frequency */
169         if (!revid_errata)
170                 longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
171         else
172                 longhaul.bits.RevisionKey = 0;
173         longhaul.bits.SoftBusRatio = mults_index & 0xf;
174         longhaul.bits.SoftBusRatio4 = (mults_index & 0x10) >> 4;
175         /* Setup new voltage */
176         if (can_scale_voltage)
177                 longhaul.bits.SoftVID = (mults_index >> 8) & 0x1f;
178         /* Sync to timer tick */
179         safe_halt();
180         /* Raise voltage if necessary */
181         if (can_scale_voltage && dir) {
182                 longhaul.bits.EnableSoftVID = 1;
183                 wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
184                 /* Change voltage */
185                 if (!cx_address) {
186                         ACPI_FLUSH_CPU_CACHE();
187                         halt();
188                 } else {
189                         ACPI_FLUSH_CPU_CACHE();
190                         /* Invoke C3 */
191                         inb(cx_address);
192                         /* Dummy op - must do something useless after P_LVL3
193                          * read */
194                         t = inl(acpi_gbl_FADT.xpm_timer_block.address);
195                 }
196                 longhaul.bits.EnableSoftVID = 0;
197                 wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
198         }
199
200         /* Change frequency on next halt or sleep */
201         longhaul.bits.EnableSoftBusRatio = 1;
202         wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
203         if (!cx_address) {
204                 ACPI_FLUSH_CPU_CACHE();
205                 halt();
206         } else {
207                 ACPI_FLUSH_CPU_CACHE();
208                 /* Invoke C3 */
209                 inb(cx_address);
210                 /* Dummy op - must do something useless after P_LVL3 read */
211                 t = inl(acpi_gbl_FADT.xpm_timer_block.address);
212         }
213         /* Disable bus ratio bit */
214         longhaul.bits.EnableSoftBusRatio = 0;
215         wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
216
217         /* Reduce voltage if necessary */
218         if (can_scale_voltage && !dir) {
219                 longhaul.bits.EnableSoftVID = 1;
220                 wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
221                 /* Change voltage */
222                 if (!cx_address) {
223                         ACPI_FLUSH_CPU_CACHE();
224                         halt();
225                 } else {
226                         ACPI_FLUSH_CPU_CACHE();
227                         /* Invoke C3 */
228                         inb(cx_address);
229                         /* Dummy op - must do something useless after P_LVL3
230                          * read */
231                         t = inl(acpi_gbl_FADT.xpm_timer_block.address);
232                 }
233                 longhaul.bits.EnableSoftVID = 0;
234                 wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
235         }
236 }
237
238 /**
239  * longhaul_set_cpu_frequency()
240  * @mults_index : bitpattern of the new multiplier.
241  *
242  * Sets a new clock ratio.
243  */
244
245 static int longhaul_setstate(struct cpufreq_policy *policy,
246                 unsigned int table_index)
247 {
248         unsigned int mults_index;
249         int speed, mult;
250         struct cpufreq_freqs freqs;
251         unsigned long flags;
252         unsigned int pic1_mask, pic2_mask;
253         u16 bm_status = 0;
254         u32 bm_timeout = 1000;
255         unsigned int dir = 0;
256
257         mults_index = longhaul_table[table_index].driver_data;
258         /* Safety precautions */
259         mult = mults[mults_index & 0x1f];
260         if (mult == -1)
261                 return -EINVAL;
262
263         speed = calc_speed(mult);
264         if ((speed > highest_speed) || (speed < lowest_speed))
265                 return -EINVAL;
266
267         /* Voltage transition before frequency transition? */
268         if (can_scale_voltage && longhaul_index < table_index)
269                 dir = 1;
270
271         freqs.old = calc_speed(longhaul_get_cpu_mult());
272         freqs.new = speed;
273
274         pr_debug("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
275                         fsb, mult/10, mult%10, print_speed(speed/1000));
276 retry_loop:
277         preempt_disable();
278         local_irq_save(flags);
279
280         pic2_mask = inb(0xA1);
281         pic1_mask = inb(0x21);  /* works on C3. save mask. */
282         outb(0xFF, 0xA1);       /* Overkill */
283         outb(0xFE, 0x21);       /* TMR0 only */
284
285         /* Wait while PCI bus is busy. */
286         if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE
287             || ((pr != NULL) && pr->flags.bm_control))) {
288                 bm_status = inw(acpi_regs_addr);
289                 bm_status &= 1 << 4;
290                 while (bm_status && bm_timeout) {
291                         outw(1 << 4, acpi_regs_addr);
292                         bm_timeout--;
293                         bm_status = inw(acpi_regs_addr);
294                         bm_status &= 1 << 4;
295                 }
296         }
297
298         if (longhaul_flags & USE_NORTHBRIDGE) {
299                 /* Disable AGP and PCI arbiters */
300                 outb(3, 0x22);
301         } else if ((pr != NULL) && pr->flags.bm_control) {
302                 /* Disable bus master arbitration */
303                 acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
304         }
305         switch (longhaul_version) {
306
307         /*
308          * Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B])
309          * Software controlled multipliers only.
310          */
311         case TYPE_LONGHAUL_V1:
312                 do_longhaul1(mults_index);
313                 break;
314
315         /*
316          * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5B] and Ezra [C5C]
317          *
318          * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N])
319          * Nehemiah can do FSB scaling too, but this has never been proven
320          * to work in practice.
321          */
322         case TYPE_LONGHAUL_V2:
323         case TYPE_POWERSAVER:
324                 if (longhaul_flags & USE_ACPI_C3) {
325                         /* Don't allow wakeup */
326                         acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
327                         do_powersaver(cx->address, mults_index, dir);
328                 } else {
329                         do_powersaver(0, mults_index, dir);
330                 }
331                 break;
332         }
333
334         if (longhaul_flags & USE_NORTHBRIDGE) {
335                 /* Enable arbiters */
336                 outb(0, 0x22);
337         } else if ((pr != NULL) && pr->flags.bm_control) {
338                 /* Enable bus master arbitration */
339                 acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
340         }
341         outb(pic2_mask, 0xA1);  /* restore mask */
342         outb(pic1_mask, 0x21);
343
344         local_irq_restore(flags);
345         preempt_enable();
346
347         freqs.new = calc_speed(longhaul_get_cpu_mult());
348         /* Check if requested frequency is set. */
349         if (unlikely(freqs.new != speed)) {
350                 pr_info("Failed to set requested frequency!\n");
351                 /* Revision ID = 1 but processor is expecting revision key
352                  * equal to 0. Jumpers at the bottom of processor will change
353                  * multiplier and FSB, but will not change bits in Longhaul
354                  * MSR nor enable voltage scaling. */
355                 if (!revid_errata) {
356                         pr_info("Enabling \"Ignore Revision ID\" option\n");
357                         revid_errata = 1;
358                         msleep(200);
359                         goto retry_loop;
360                 }
361                 /* Why ACPI C3 sometimes doesn't work is a mystery for me.
362                  * But it does happen. Processor is entering ACPI C3 state,
363                  * but it doesn't change frequency. I tried poking various
364                  * bits in northbridge registers, but without success. */
365                 if (longhaul_flags & USE_ACPI_C3) {
366                         pr_info("Disabling ACPI C3 support\n");
367                         longhaul_flags &= ~USE_ACPI_C3;
368                         if (revid_errata) {
369                                 pr_info("Disabling \"Ignore Revision ID\" option\n");
370                                 revid_errata = 0;
371                         }
372                         msleep(200);
373                         goto retry_loop;
374                 }
375                 /* This shouldn't happen. Longhaul ver. 2 was reported not
376                  * working on processors without voltage scaling, but with
377                  * RevID = 1. RevID errata will make things right. Just
378                  * to be 100% sure. */
379                 if (longhaul_version == TYPE_LONGHAUL_V2) {
380                         pr_info("Switching to Longhaul ver. 1\n");
381                         longhaul_version = TYPE_LONGHAUL_V1;
382                         msleep(200);
383                         goto retry_loop;
384                 }
385         }
386
387         if (!bm_timeout) {
388                 pr_info("Warning: Timeout while waiting for idle PCI bus\n");
389                 return -EBUSY;
390         }
391
392         return 0;
393 }
394
395 /*
396  * Centaur decided to make life a little more tricky.
397  * Only longhaul v1 is allowed to read EBLCR BSEL[0:1].
398  * Samuel2 and above have to try and guess what the FSB is.
399  * We do this by assuming we booted at maximum multiplier, and interpolate
400  * between that value multiplied by possible FSBs and cpu_mhz which
401  * was calculated at boot time. Really ugly, but no other way to do this.
402  */
403
404 #define ROUNDING        0xf
405
406 static int guess_fsb(int mult)
407 {
408         int speed = cpu_khz / 1000;
409         int i;
410         int speeds[] = { 666, 1000, 1333, 2000 };
411         int f_max, f_min;
412
413         for (i = 0; i < 4; i++) {
414                 f_max = ((speeds[i] * mult) + 50) / 100;
415                 f_max += (ROUNDING / 2);
416                 f_min = f_max - ROUNDING;
417                 if ((speed <= f_max) && (speed >= f_min))
418                         return speeds[i] / 10;
419         }
420         return 0;
421 }
422
423
424 static int longhaul_get_ranges(void)
425 {
426         unsigned int i, j, k = 0;
427         unsigned int ratio;
428         int mult;
429
430         /* Get current frequency */
431         mult = longhaul_get_cpu_mult();
432         if (mult == -1) {
433                 pr_info("Invalid (reserved) multiplier!\n");
434                 return -EINVAL;
435         }
436         fsb = guess_fsb(mult);
437         if (fsb == 0) {
438                 pr_info("Invalid (reserved) FSB!\n");
439                 return -EINVAL;
440         }
441         /* Get max multiplier - as we always did.
442          * Longhaul MSR is useful only when voltage scaling is enabled.
443          * C3 is booting at max anyway. */
444         maxmult = mult;
445         /* Get min multiplier */
446         switch (cpu_model) {
447         case CPU_NEHEMIAH:
448                 minmult = 50;
449                 break;
450         case CPU_NEHEMIAH_C:
451                 minmult = 40;
452                 break;
453         default:
454                 minmult = 30;
455                 break;
456         }
457
458         pr_debug("MinMult:%d.%dx MaxMult:%d.%dx\n",
459                  minmult/10, minmult%10, maxmult/10, maxmult%10);
460
461         highest_speed = calc_speed(maxmult);
462         lowest_speed = calc_speed(minmult);
463         pr_debug("FSB:%dMHz  Lowest speed: %s   Highest speed:%s\n", fsb,
464                  print_speed(lowest_speed/1000),
465                  print_speed(highest_speed/1000));
466
467         if (lowest_speed == highest_speed) {
468                 pr_info("highestspeed == lowest, aborting\n");
469                 return -EINVAL;
470         }
471         if (lowest_speed > highest_speed) {
472                 pr_info("nonsense! lowest (%d > %d) !\n",
473                         lowest_speed, highest_speed);
474                 return -EINVAL;
475         }
476
477         longhaul_table = kcalloc(numscales + 1, sizeof(*longhaul_table),
478                                  GFP_KERNEL);
479         if (!longhaul_table)
480                 return -ENOMEM;
481
482         for (j = 0; j < numscales; j++) {
483                 ratio = mults[j];
484                 if (ratio == -1)
485                         continue;
486                 if (ratio > maxmult || ratio < minmult)
487                         continue;
488                 longhaul_table[k].frequency = calc_speed(ratio);
489                 longhaul_table[k].driver_data   = j;
490                 k++;
491         }
492         if (k <= 1) {
493                 kfree(longhaul_table);
494                 return -ENODEV;
495         }
496         /* Sort */
497         for (j = 0; j < k - 1; j++) {
498                 unsigned int min_f, min_i;
499                 min_f = longhaul_table[j].frequency;
500                 min_i = j;
501                 for (i = j + 1; i < k; i++) {
502                         if (longhaul_table[i].frequency < min_f) {
503                                 min_f = longhaul_table[i].frequency;
504                                 min_i = i;
505                         }
506                 }
507                 if (min_i != j) {
508                         swap(longhaul_table[j].frequency,
509                              longhaul_table[min_i].frequency);
510                         swap(longhaul_table[j].driver_data,
511                              longhaul_table[min_i].driver_data);
512                 }
513         }
514
515         longhaul_table[k].frequency = CPUFREQ_TABLE_END;
516
517         /* Find index we are running on */
518         for (j = 0; j < k; j++) {
519                 if (mults[longhaul_table[j].driver_data & 0x1f] == mult) {
520                         longhaul_index = j;
521                         break;
522                 }
523         }
524         return 0;
525 }
526
527
528 static void longhaul_setup_voltagescaling(void)
529 {
530         struct cpufreq_frequency_table *freq_pos;
531         union msr_longhaul longhaul;
532         struct mV_pos minvid, maxvid, vid;
533         unsigned int j, speed, pos, kHz_step, numvscales;
534         int min_vid_speed;
535
536         rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
537         if (!(longhaul.bits.RevisionID & 1)) {
538                 pr_info("Voltage scaling not supported by CPU\n");
539                 return;
540         }
541
542         if (!longhaul.bits.VRMRev) {
543                 pr_info("VRM 8.5\n");
544                 vrm_mV_table = &vrm85_mV[0];
545                 mV_vrm_table = &mV_vrm85[0];
546         } else {
547                 pr_info("Mobile VRM\n");
548                 if (cpu_model < CPU_NEHEMIAH)
549                         return;
550                 vrm_mV_table = &mobilevrm_mV[0];
551                 mV_vrm_table = &mV_mobilevrm[0];
552         }
553
554         minvid = vrm_mV_table[longhaul.bits.MinimumVID];
555         maxvid = vrm_mV_table[longhaul.bits.MaximumVID];
556
557         if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) {
558                 pr_info("Bogus values Min:%d.%03d Max:%d.%03d - Voltage scaling disabled\n",
559                         minvid.mV/1000, minvid.mV%1000,
560                         maxvid.mV/1000, maxvid.mV%1000);
561                 return;
562         }
563
564         if (minvid.mV == maxvid.mV) {
565                 pr_info("Claims to support voltage scaling but min & max are both %d.%03d - Voltage scaling disabled\n",
566                         maxvid.mV/1000, maxvid.mV%1000);
567                 return;
568         }
569
570         /* How many voltage steps*/
571         numvscales = maxvid.pos - minvid.pos + 1;
572         pr_info("Max VID=%d.%03d  Min VID=%d.%03d, %d possible voltage scales\n",
573                 maxvid.mV/1000, maxvid.mV%1000,
574                 minvid.mV/1000, minvid.mV%1000,
575                 numvscales);
576
577         /* Calculate max frequency at min voltage */
578         j = longhaul.bits.MinMHzBR;
579         if (longhaul.bits.MinMHzBR4)
580                 j += 16;
581         min_vid_speed = eblcr[j];
582         if (min_vid_speed == -1)
583                 return;
584         switch (longhaul.bits.MinMHzFSB) {
585         case 0:
586                 min_vid_speed *= 13333;
587                 break;
588         case 1:
589                 min_vid_speed *= 10000;
590                 break;
591         case 3:
592                 min_vid_speed *= 6666;
593                 break;
594         default:
595                 return;
596         }
597         if (min_vid_speed >= highest_speed)
598                 return;
599         /* Calculate kHz for one voltage step */
600         kHz_step = (highest_speed - min_vid_speed) / numvscales;
601
602         cpufreq_for_each_entry_idx(freq_pos, longhaul_table, j) {
603                 speed = freq_pos->frequency;
604                 if (speed > min_vid_speed)
605                         pos = (speed - min_vid_speed) / kHz_step + minvid.pos;
606                 else
607                         pos = minvid.pos;
608                 freq_pos->driver_data |= mV_vrm_table[pos] << 8;
609                 vid = vrm_mV_table[mV_vrm_table[pos]];
610                 pr_info("f: %d kHz, index: %d, vid: %d mV\n",
611                         speed, j, vid.mV);
612         }
613
614         can_scale_voltage = 1;
615         pr_info("Voltage scaling enabled\n");
616 }
617
618
619 static int longhaul_target(struct cpufreq_policy *policy,
620                             unsigned int table_index)
621 {
622         unsigned int i;
623         unsigned int dir = 0;
624         u8 vid, current_vid;
625         int retval = 0;
626
627         if (!can_scale_voltage)
628                 retval = longhaul_setstate(policy, table_index);
629         else {
630                 /* On test system voltage transitions exceeding single
631                  * step up or down were turning motherboard off. Both
632                  * "ondemand" and "userspace" are unsafe. C7 is doing
633                  * this in hardware, C3 is old and we need to do this
634                  * in software. */
635                 i = longhaul_index;
636                 current_vid = (longhaul_table[longhaul_index].driver_data >> 8);
637                 current_vid &= 0x1f;
638                 if (table_index > longhaul_index)
639                         dir = 1;
640                 while (i != table_index) {
641                         vid = (longhaul_table[i].driver_data >> 8) & 0x1f;
642                         if (vid != current_vid) {
643                                 retval = longhaul_setstate(policy, i);
644                                 current_vid = vid;
645                                 msleep(200);
646                         }
647                         if (dir)
648                                 i++;
649                         else
650                                 i--;
651                 }
652                 retval = longhaul_setstate(policy, table_index);
653         }
654
655         longhaul_index = table_index;
656         return retval;
657 }
658
659
660 static unsigned int longhaul_get(unsigned int cpu)
661 {
662         if (cpu)
663                 return 0;
664         return calc_speed(longhaul_get_cpu_mult());
665 }
666
667 static acpi_status longhaul_walk_callback(acpi_handle obj_handle,
668                                           u32 nesting_level,
669                                           void *context, void **return_value)
670 {
671         struct acpi_device *d = acpi_fetch_acpi_dev(obj_handle);
672
673         if (!d)
674                 return 0;
675
676         *return_value = acpi_driver_data(d);
677         return 1;
678 }
679
680 /* VIA don't support PM2 reg, but have something similar */
681 static int enable_arbiter_disable(void)
682 {
683         struct pci_dev *dev;
684         int status = 1;
685         int reg;
686         u8 pci_cmd;
687
688         /* Find PLE133 host bridge */
689         reg = 0x78;
690         dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0,
691                              NULL);
692         /* Find PM133/VT8605 host bridge */
693         if (dev == NULL)
694                 dev = pci_get_device(PCI_VENDOR_ID_VIA,
695                                      PCI_DEVICE_ID_VIA_8605_0, NULL);
696         /* Find CLE266 host bridge */
697         if (dev == NULL) {
698                 reg = 0x76;
699                 dev = pci_get_device(PCI_VENDOR_ID_VIA,
700                                      PCI_DEVICE_ID_VIA_862X_0, NULL);
701                 /* Find CN400 V-Link host bridge */
702                 if (dev == NULL)
703                         dev = pci_get_device(PCI_VENDOR_ID_VIA, 0x7259, NULL);
704         }
705         if (dev != NULL) {
706                 /* Enable access to port 0x22 */
707                 pci_read_config_byte(dev, reg, &pci_cmd);
708                 if (!(pci_cmd & 1<<7)) {
709                         pci_cmd |= 1<<7;
710                         pci_write_config_byte(dev, reg, pci_cmd);
711                         pci_read_config_byte(dev, reg, &pci_cmd);
712                         if (!(pci_cmd & 1<<7)) {
713                                 pr_err("Can't enable access to port 0x22\n");
714                                 status = 0;
715                         }
716                 }
717                 pci_dev_put(dev);
718                 return status;
719         }
720         return 0;
721 }
722
723 static int longhaul_setup_southbridge(void)
724 {
725         struct pci_dev *dev;
726         u8 pci_cmd;
727
728         /* Find VT8235 southbridge */
729         dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL);
730         if (dev == NULL)
731                 /* Find VT8237 southbridge */
732                 dev = pci_get_device(PCI_VENDOR_ID_VIA,
733                                      PCI_DEVICE_ID_VIA_8237, NULL);
734         if (dev != NULL) {
735                 /* Set transition time to max */
736                 pci_read_config_byte(dev, 0xec, &pci_cmd);
737                 pci_cmd &= ~(1 << 2);
738                 pci_write_config_byte(dev, 0xec, pci_cmd);
739                 pci_read_config_byte(dev, 0xe4, &pci_cmd);
740                 pci_cmd &= ~(1 << 7);
741                 pci_write_config_byte(dev, 0xe4, pci_cmd);
742                 pci_read_config_byte(dev, 0xe5, &pci_cmd);
743                 pci_cmd |= 1 << 7;
744                 pci_write_config_byte(dev, 0xe5, pci_cmd);
745                 /* Get address of ACPI registers block*/
746                 pci_read_config_byte(dev, 0x81, &pci_cmd);
747                 if (pci_cmd & 1 << 7) {
748                         pci_read_config_dword(dev, 0x88, &acpi_regs_addr);
749                         acpi_regs_addr &= 0xff00;
750                         pr_info("ACPI I/O at 0x%x\n", acpi_regs_addr);
751                 }
752
753                 pci_dev_put(dev);
754                 return 1;
755         }
756         return 0;
757 }
758
759 static int longhaul_cpu_init(struct cpufreq_policy *policy)
760 {
761         struct cpuinfo_x86 *c = &cpu_data(0);
762         char *cpuname = NULL;
763         int ret;
764         u32 lo, hi;
765
766         /* Check what we have on this motherboard */
767         switch (c->x86_model) {
768         case 6:
769                 cpu_model = CPU_SAMUEL;
770                 cpuname = "C3 'Samuel' [C5A]";
771                 longhaul_version = TYPE_LONGHAUL_V1;
772                 memcpy(mults, samuel1_mults, sizeof(samuel1_mults));
773                 memcpy(eblcr, samuel1_eblcr, sizeof(samuel1_eblcr));
774                 break;
775
776         case 7:
777                 switch (c->x86_stepping) {
778                 case 0:
779                         longhaul_version = TYPE_LONGHAUL_V1;
780                         cpu_model = CPU_SAMUEL2;
781                         cpuname = "C3 'Samuel 2' [C5B]";
782                         /* Note, this is not a typo, early Samuel2's had
783                          * Samuel1 ratios. */
784                         memcpy(mults, samuel1_mults, sizeof(samuel1_mults));
785                         memcpy(eblcr, samuel2_eblcr, sizeof(samuel2_eblcr));
786                         break;
787                 case 1 ... 15:
788                         longhaul_version = TYPE_LONGHAUL_V2;
789                         if (c->x86_stepping < 8) {
790                                 cpu_model = CPU_SAMUEL2;
791                                 cpuname = "C3 'Samuel 2' [C5B]";
792                         } else {
793                                 cpu_model = CPU_EZRA;
794                                 cpuname = "C3 'Ezra' [C5C]";
795                         }
796                         memcpy(mults, ezra_mults, sizeof(ezra_mults));
797                         memcpy(eblcr, ezra_eblcr, sizeof(ezra_eblcr));
798                         break;
799                 }
800                 break;
801
802         case 8:
803                 cpu_model = CPU_EZRA_T;
804                 cpuname = "C3 'Ezra-T' [C5M]";
805                 longhaul_version = TYPE_POWERSAVER;
806                 numscales = 32;
807                 memcpy(mults, ezrat_mults, sizeof(ezrat_mults));
808                 memcpy(eblcr, ezrat_eblcr, sizeof(ezrat_eblcr));
809                 break;
810
811         case 9:
812                 longhaul_version = TYPE_POWERSAVER;
813                 numscales = 32;
814                 memcpy(mults, nehemiah_mults, sizeof(nehemiah_mults));
815                 memcpy(eblcr, nehemiah_eblcr, sizeof(nehemiah_eblcr));
816                 switch (c->x86_stepping) {
817                 case 0 ... 1:
818                         cpu_model = CPU_NEHEMIAH;
819                         cpuname = "C3 'Nehemiah A' [C5XLOE]";
820                         break;
821                 case 2 ... 4:
822                         cpu_model = CPU_NEHEMIAH;
823                         cpuname = "C3 'Nehemiah B' [C5XLOH]";
824                         break;
825                 case 5 ... 15:
826                         cpu_model = CPU_NEHEMIAH_C;
827                         cpuname = "C3 'Nehemiah C' [C5P]";
828                         break;
829                 }
830                 break;
831
832         default:
833                 cpuname = "Unknown";
834                 break;
835         }
836         /* Check Longhaul ver. 2 */
837         if (longhaul_version == TYPE_LONGHAUL_V2) {
838                 rdmsr(MSR_VIA_LONGHAUL, lo, hi);
839                 if (lo == 0 && hi == 0)
840                         /* Looks like MSR isn't present */
841                         longhaul_version = TYPE_LONGHAUL_V1;
842         }
843
844         pr_info("VIA %s CPU detected.  ", cpuname);
845         switch (longhaul_version) {
846         case TYPE_LONGHAUL_V1:
847         case TYPE_LONGHAUL_V2:
848                 pr_cont("Longhaul v%d supported\n", longhaul_version);
849                 break;
850         case TYPE_POWERSAVER:
851                 pr_cont("Powersaver supported\n");
852                 break;
853         }
854
855         /* Doesn't hurt */
856         longhaul_setup_southbridge();
857
858         /* Find ACPI data for processor */
859         acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
860                                 ACPI_UINT32_MAX, &longhaul_walk_callback, NULL,
861                                 NULL, (void *)&pr);
862
863         /* Check ACPI support for C3 state */
864         if (pr != NULL && longhaul_version == TYPE_POWERSAVER) {
865                 cx = &pr->power.states[ACPI_STATE_C3];
866                 if (cx->address > 0 && cx->latency <= 1000)
867                         longhaul_flags |= USE_ACPI_C3;
868         }
869         /* Disable if it isn't working */
870         if (disable_acpi_c3)
871                 longhaul_flags &= ~USE_ACPI_C3;
872         /* Check if northbridge is friendly */
873         if (enable_arbiter_disable())
874                 longhaul_flags |= USE_NORTHBRIDGE;
875
876         /* Check ACPI support for bus master arbiter disable */
877         if (!(longhaul_flags & USE_ACPI_C3
878              || longhaul_flags & USE_NORTHBRIDGE)
879             && ((pr == NULL) || !(pr->flags.bm_control))) {
880                 pr_err("No ACPI support: Unsupported northbridge\n");
881                 return -ENODEV;
882         }
883
884         if (longhaul_flags & USE_NORTHBRIDGE)
885                 pr_info("Using northbridge support\n");
886         if (longhaul_flags & USE_ACPI_C3)
887                 pr_info("Using ACPI support\n");
888
889         ret = longhaul_get_ranges();
890         if (ret != 0)
891                 return ret;
892
893         if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0))
894                 longhaul_setup_voltagescaling();
895
896         policy->transition_delay_us = 200000;   /* usec */
897         policy->freq_table = longhaul_table;
898
899         return 0;
900 }
901
902 static struct cpufreq_driver longhaul_driver = {
903         .verify = cpufreq_generic_frequency_table_verify,
904         .target_index = longhaul_target,
905         .get    = longhaul_get,
906         .init   = longhaul_cpu_init,
907         .name   = "longhaul",
908         .attr   = cpufreq_generic_attr,
909 };
910
911 static const struct x86_cpu_id longhaul_id[] = {
912         X86_MATCH_VENDOR_FAM(CENTAUR, 6, NULL),
913         {}
914 };
915 MODULE_DEVICE_TABLE(x86cpu, longhaul_id);
916
917 static int __init longhaul_init(void)
918 {
919         struct cpuinfo_x86 *c = &cpu_data(0);
920
921         if (!x86_match_cpu(longhaul_id))
922                 return -ENODEV;
923
924         if (!enable) {
925                 pr_err("Option \"enable\" not set - Aborting\n");
926                 return -ENODEV;
927         }
928 #ifdef CONFIG_SMP
929         if (num_online_cpus() > 1) {
930                 pr_err("More than 1 CPU detected, longhaul disabled\n");
931                 return -ENODEV;
932         }
933 #endif
934 #ifdef CONFIG_X86_IO_APIC
935         if (boot_cpu_has(X86_FEATURE_APIC)) {
936                 pr_err("APIC detected. Longhaul is currently broken in this configuration.\n");
937                 return -ENODEV;
938         }
939 #endif
940         switch (c->x86_model) {
941         case 6 ... 9:
942                 return cpufreq_register_driver(&longhaul_driver);
943         case 10:
944                 pr_err("Use acpi-cpufreq driver for VIA C7\n");
945         }
946
947         return -ENODEV;
948 }
949
950
951 static void __exit longhaul_exit(void)
952 {
953         struct cpufreq_policy *policy = cpufreq_cpu_get(0);
954         int i;
955
956         for (i = 0; i < numscales; i++) {
957                 if (mults[i] == maxmult) {
958                         struct cpufreq_freqs freqs;
959
960                         freqs.old = policy->cur;
961                         freqs.new = longhaul_table[i].frequency;
962                         freqs.flags = 0;
963
964                         cpufreq_freq_transition_begin(policy, &freqs);
965                         longhaul_setstate(policy, i);
966                         cpufreq_freq_transition_end(policy, &freqs, 0);
967                         break;
968                 }
969         }
970
971         cpufreq_cpu_put(policy);
972         cpufreq_unregister_driver(&longhaul_driver);
973         kfree(longhaul_table);
974 }
975
976 /* Even if BIOS is exporting ACPI C3 state, and it is used
977  * with success when CPU is idle, this state doesn't
978  * trigger frequency transition in some cases. */
979 module_param(disable_acpi_c3, int, 0644);
980 MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support");
981 /* Change CPU voltage with frequency. Very useful to save
982  * power, but most VIA C3 processors aren't supporting it. */
983 module_param(scale_voltage, int, 0644);
984 MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
985 /* Force revision key to 0 for processors which doesn't
986  * support voltage scaling, but are introducing itself as
987  * such. */
988 module_param(revid_errata, int, 0644);
989 MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID");
990 /* By default driver is disabled to prevent incompatible
991  * system freeze. */
992 module_param(enable, int, 0644);
993 MODULE_PARM_DESC(enable, "Enable driver");
994
995 MODULE_AUTHOR("Dave Jones");
996 MODULE_DESCRIPTION("Longhaul driver for VIA Cyrix processors.");
997 MODULE_LICENSE("GPL");
998
999 late_initcall(longhaul_init);
1000 module_exit(longhaul_exit);