drivers/clk/bcm/clk-ns2.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 // Copyright (C) 2015 Broadcom Corporation
   3
   4 #include <linux/kernel.h>
   5 #include <linux/err.h>
   6 #include <linux/clk-provider.h>
   7 #include <linux/io.h>
   8 #include <linux/of.h>
   9 #include <linux/of_address.h>
  10
  11 #include <dt-bindings/clock/bcm-ns2.h>
  12 #include "clk-iproc.h"
  13
  14 #define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
  15
  16 #define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
  17         .pwr_shift = ps, .iso_shift = is }
  18
  19 #define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
  20         .p_reset_shift = prs }
  21
  22 #define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
  23         .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas,    \
  24         .ka_width = kaw }
  25
  26 #define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
  27
  28 #define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
  29         .hold_shift = hs, .bypass_shift = bs }
  30
  31 static const struct iproc_pll_ctrl genpll_scr = {
  32         .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
  33         .aon = AON_VAL(0x0, 1, 15, 12),
  34         .reset = RESET_VAL(0x4, 2, 1),
  35         .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3),
  36         .ndiv_int = REG_VAL(0x8, 4, 10),
  37         .pdiv = REG_VAL(0x8, 0, 4),
  38         .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
  39         .status = REG_VAL(0x0, 27, 1),
  40 };
  41
  42
  43 static const struct iproc_clk_ctrl genpll_scr_clk[] = {
  44         /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
  45          * in NS2.  However, it doesn't appear to be used anywhere, so setting
  46          * it to 0.
  47          */
  48         [BCM_NS2_GENPLL_SCR_SCR_CLK] = {
  49                 .channel = BCM_NS2_GENPLL_SCR_SCR_CLK,
  50                 .flags = IPROC_CLK_AON,
  51                 .enable = ENABLE_VAL(0x0, 18, 12, 0),
  52                 .mdiv = REG_VAL(0x18, 0, 8),
  53         },
  54         [BCM_NS2_GENPLL_SCR_FS_CLK] = {
  55                 .channel = BCM_NS2_GENPLL_SCR_FS_CLK,
  56                 .flags = IPROC_CLK_AON,
  57                 .enable = ENABLE_VAL(0x0, 19, 13, 0),
  58                 .mdiv = REG_VAL(0x18, 8, 8),
  59         },
  60         [BCM_NS2_GENPLL_SCR_AUDIO_CLK] = {
  61                 .channel = BCM_NS2_GENPLL_SCR_AUDIO_CLK,
  62                 .flags = IPROC_CLK_AON,
  63                 .enable = ENABLE_VAL(0x0, 20, 14, 0),
  64                 .mdiv = REG_VAL(0x14, 0, 8),
  65         },
  66         [BCM_NS2_GENPLL_SCR_CH3_UNUSED] = {
  67                 .channel = BCM_NS2_GENPLL_SCR_CH3_UNUSED,
  68                 .flags = IPROC_CLK_AON,
  69                 .enable = ENABLE_VAL(0x0, 21, 15, 0),
  70                 .mdiv = REG_VAL(0x14, 8, 8),
  71         },
  72         [BCM_NS2_GENPLL_SCR_CH4_UNUSED] = {
  73                 .channel = BCM_NS2_GENPLL_SCR_CH4_UNUSED,
  74                 .flags = IPROC_CLK_AON,
  75                 .enable = ENABLE_VAL(0x0, 22, 16, 0),
  76                 .mdiv = REG_VAL(0x14, 16, 8),
  77         },
  78         [BCM_NS2_GENPLL_SCR_CH5_UNUSED] = {
  79                 .channel = BCM_NS2_GENPLL_SCR_CH5_UNUSED,
  80                 .flags = IPROC_CLK_AON,
  81                 .enable = ENABLE_VAL(0x0, 23, 17, 0),
  82                 .mdiv = REG_VAL(0x14, 24, 8),
  83         },
  84 };
  85
  86 static void __init ns2_genpll_scr_clk_init(struct device_node *node)
  87 {
  88         iproc_pll_clk_setup(node, &genpll_scr, NULL, 0, genpll_scr_clk,
  89                             ARRAY_SIZE(genpll_scr_clk));
  90 }
  91 CLK_OF_DECLARE(ns2_genpll_src_clk, "brcm,ns2-genpll-scr",
  92                ns2_genpll_scr_clk_init);
  93
  94 static const struct iproc_pll_ctrl genpll_sw = {
  95         .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
  96         .aon = AON_VAL(0x0, 1, 11, 10),
  97         .reset = RESET_VAL(0x4, 2, 1),
  98         .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3),
  99         .ndiv_int = REG_VAL(0x8, 4, 10),
 100         .pdiv = REG_VAL(0x8, 0, 4),
 101         .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
 102         .status = REG_VAL(0x0, 13, 1),
 103 };
 104
 105 static const struct iproc_clk_ctrl genpll_sw_clk[] = {
 106         /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
 107          * in NS2.  However, it doesn't appear to be used anywhere, so setting
 108          * it to 0.
 109          */
 110         [BCM_NS2_GENPLL_SW_RPE_CLK] = {
 111                 .channel = BCM_NS2_GENPLL_SW_RPE_CLK,
 112                 .flags = IPROC_CLK_AON,
 113                 .enable = ENABLE_VAL(0x0, 18, 12, 0),
 114                 .mdiv = REG_VAL(0x18, 0, 8),
 115         },
 116         [BCM_NS2_GENPLL_SW_250_CLK] = {
 117                 .channel = BCM_NS2_GENPLL_SW_250_CLK,
 118                 .flags = IPROC_CLK_AON,
 119                 .enable = ENABLE_VAL(0x0, 19, 13, 0),
 120                 .mdiv = REG_VAL(0x18, 8, 8),
 121         },
 122         [BCM_NS2_GENPLL_SW_NIC_CLK] = {
 123                 .channel = BCM_NS2_GENPLL_SW_NIC_CLK,
 124                 .flags = IPROC_CLK_AON,
 125                 .enable = ENABLE_VAL(0x0, 20, 14, 0),
 126                 .mdiv = REG_VAL(0x14, 0, 8),
 127         },
 128         [BCM_NS2_GENPLL_SW_CHIMP_CLK] = {
 129                 .channel = BCM_NS2_GENPLL_SW_CHIMP_CLK,
 130                 .flags = IPROC_CLK_AON,
 131                 .enable = ENABLE_VAL(0x0, 21, 15, 0),
 132                 .mdiv = REG_VAL(0x14, 8, 8),
 133         },
 134         [BCM_NS2_GENPLL_SW_PORT_CLK] = {
 135                 .channel = BCM_NS2_GENPLL_SW_PORT_CLK,
 136                 .flags = IPROC_CLK_AON,
 137                 .enable = ENABLE_VAL(0x0, 22, 16, 0),
 138                 .mdiv = REG_VAL(0x14, 16, 8),
 139         },
 140         [BCM_NS2_GENPLL_SW_SDIO_CLK] = {
 141                 .channel = BCM_NS2_GENPLL_SW_SDIO_CLK,
 142                 .flags = IPROC_CLK_AON,
 143                 .enable = ENABLE_VAL(0x0, 23, 17, 0),
 144                 .mdiv = REG_VAL(0x14, 24, 8),
 145         },
 146 };
 147
 148 static void __init ns2_genpll_sw_clk_init(struct device_node *node)
 149 {
 150         iproc_pll_clk_setup(node, &genpll_sw, NULL, 0, genpll_sw_clk,
 151                             ARRAY_SIZE(genpll_sw_clk));
 152 }
 153 CLK_OF_DECLARE(ns2_genpll_sw_clk, "brcm,ns2-genpll-sw",
 154                ns2_genpll_sw_clk_init);
 155
 156 static const struct iproc_pll_ctrl lcpll_ddr = {
 157         .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
 158         .aon = AON_VAL(0x0, 2, 1, 0),
 159         .reset = RESET_VAL(0x4, 2, 1),
 160         .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4),
 161         .ndiv_int = REG_VAL(0x8, 4, 10),
 162         .pdiv = REG_VAL(0x8, 0, 4),
 163         .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
 164         .status = REG_VAL(0x0, 0, 1),
 165 };
 166
 167 static const struct iproc_clk_ctrl lcpll_ddr_clk[] = {
 168         /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
 169          * in NS2.  However, it doesn't appear to be used anywhere, so setting
 170          * it to 0.
 171          */
 172         [BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK] = {
 173                 .channel = BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK,
 174                 .flags = IPROC_CLK_AON,
 175                 .enable = ENABLE_VAL(0x0, 18, 12, 0),
 176                 .mdiv = REG_VAL(0x14, 0, 8),
 177         },
 178         [BCM_NS2_LCPLL_DDR_DDR_CLK] = {
 179                 .channel = BCM_NS2_LCPLL_DDR_DDR_CLK,
 180                 .flags = IPROC_CLK_AON,
 181                 .enable = ENABLE_VAL(0x0, 19, 13, 0),
 182                 .mdiv = REG_VAL(0x14, 8, 8),
 183         },
 184         [BCM_NS2_LCPLL_DDR_CH2_UNUSED] = {
 185                 .channel = BCM_NS2_LCPLL_DDR_CH2_UNUSED,
 186                 .flags = IPROC_CLK_AON,
 187                 .enable = ENABLE_VAL(0x0, 20, 14, 0),
 188                 .mdiv = REG_VAL(0x10, 0, 8),
 189         },
 190         [BCM_NS2_LCPLL_DDR_CH3_UNUSED] = {
 191                 .channel = BCM_NS2_LCPLL_DDR_CH3_UNUSED,
 192                 .flags = IPROC_CLK_AON,
 193                 .enable = ENABLE_VAL(0x0, 21, 15, 0),
 194                 .mdiv = REG_VAL(0x10, 8, 8),
 195         },
 196         [BCM_NS2_LCPLL_DDR_CH4_UNUSED] = {
 197                 .channel = BCM_NS2_LCPLL_DDR_CH4_UNUSED,
 198                 .flags = IPROC_CLK_AON,
 199                 .enable = ENABLE_VAL(0x0, 22, 16, 0),
 200                 .mdiv = REG_VAL(0x10, 16, 8),
 201         },
 202         [BCM_NS2_LCPLL_DDR_CH5_UNUSED] = {
 203                 .channel = BCM_NS2_LCPLL_DDR_CH5_UNUSED,
 204                 .flags = IPROC_CLK_AON,
 205                 .enable = ENABLE_VAL(0x0, 23, 17, 0),
 206                 .mdiv = REG_VAL(0x10, 24, 8),
 207         },
 208 };
 209
 210 static void __init ns2_lcpll_ddr_clk_init(struct device_node *node)
 211 {
 212         iproc_pll_clk_setup(node, &lcpll_ddr, NULL, 0, lcpll_ddr_clk,
 213                             ARRAY_SIZE(lcpll_ddr_clk));
 214 }
 215 CLK_OF_DECLARE(ns2_lcpll_ddr_clk, "brcm,ns2-lcpll-ddr",
 216                ns2_lcpll_ddr_clk_init);
 217
 218 static const struct iproc_pll_ctrl lcpll_ports = {
 219         .flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
 220         .aon = AON_VAL(0x0, 2, 5, 4),
 221         .reset = RESET_VAL(0x4, 2, 1),
 222         .dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4),
 223         .ndiv_int = REG_VAL(0x8, 4, 10),
 224         .pdiv = REG_VAL(0x8, 0, 4),
 225         .vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
 226         .status = REG_VAL(0x0, 0, 1),
 227 };
 228
 229 static const struct iproc_clk_ctrl lcpll_ports_clk[] = {
 230         /* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
 231          * in NS2.  However, it doesn't appear to be used anywhere, so setting
 232          * it to 0.
 233          */
 234         [BCM_NS2_LCPLL_PORTS_WAN_CLK] = {
 235                 .channel = BCM_NS2_LCPLL_PORTS_WAN_CLK,
 236                 .flags = IPROC_CLK_AON,
 237                 .enable = ENABLE_VAL(0x0, 18, 12, 0),
 238                 .mdiv = REG_VAL(0x14, 0, 8),
 239         },
 240         [BCM_NS2_LCPLL_PORTS_RGMII_CLK] = {
 241                 .channel = BCM_NS2_LCPLL_PORTS_RGMII_CLK,
 242                 .flags = IPROC_CLK_AON,
 243                 .enable = ENABLE_VAL(0x0, 19, 13, 0),
 244                 .mdiv = REG_VAL(0x14, 8, 8),
 245         },
 246         [BCM_NS2_LCPLL_PORTS_CH2_UNUSED] = {
 247                 .channel = BCM_NS2_LCPLL_PORTS_CH2_UNUSED,
 248                 .flags = IPROC_CLK_AON,
 249                 .enable = ENABLE_VAL(0x0, 20, 14, 0),
 250                 .mdiv = REG_VAL(0x10, 0, 8),
 251         },
 252         [BCM_NS2_LCPLL_PORTS_CH3_UNUSED] = {
 253                 .channel = BCM_NS2_LCPLL_PORTS_CH3_UNUSED,
 254                 .flags = IPROC_CLK_AON,
 255                 .enable = ENABLE_VAL(0x0, 21, 15, 0),
 256                 .mdiv = REG_VAL(0x10, 8, 8),
 257         },
 258         [BCM_NS2_LCPLL_PORTS_CH4_UNUSED] = {
 259                 .channel = BCM_NS2_LCPLL_PORTS_CH4_UNUSED,
 260                 .flags = IPROC_CLK_AON,
 261                 .enable = ENABLE_VAL(0x0, 22, 16, 0),
 262                 .mdiv = REG_VAL(0x10, 16, 8),
 263         },
 264         [BCM_NS2_LCPLL_PORTS_CH5_UNUSED] = {
 265                 .channel = BCM_NS2_LCPLL_PORTS_CH5_UNUSED,
 266                 .flags = IPROC_CLK_AON,
 267                 .enable = ENABLE_VAL(0x0, 23, 17, 0),
 268                 .mdiv = REG_VAL(0x10, 24, 8),
 269         },
 270 };
 271
 272 static void __init ns2_lcpll_ports_clk_init(struct device_node *node)
 273 {
 274         iproc_pll_clk_setup(node, &lcpll_ports, NULL, 0, lcpll_ports_clk,
 275                             ARRAY_SIZE(lcpll_ports_clk));
 276 }
 277 CLK_OF_DECLARE(ns2_lcpll_ports_clk, "brcm,ns2-lcpll-ports",
 278                ns2_lcpll_ports_clk_init);