drivers/char/tpm/tpm_i2c_nuvoton.c

   1  /******************************************************************************
   2  * Nuvoton TPM I2C Device Driver Interface for WPCT301/NPCT501/NPCT6XX,
   3  * based on the TCG TPM Interface Spec version 1.2.
   4  * Specifications at www.trustedcomputinggroup.org
   5  *
   6  * Copyright (C) 2011, Nuvoton Technology Corporation.
   7  *  Dan Morav <dan.morav@nuvoton.com>
   8  * Copyright (C) 2013, Obsidian Research Corp.
   9  *  Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
  10  *
  11  * This program is free software: you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License as published by
  13  * the Free Software Foundation, either version 2 of the License, or
  14  * (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program.  If not, see http://www.gnu.org/licenses/>.
  23  *
  24  * Nuvoton contact information: APC.Support@nuvoton.com
  25  *****************************************************************************/
  26
  27 #include <linux/init.h>
  28 #include <linux/module.h>
  29 #include <linux/moduleparam.h>
  30 #include <linux/slab.h>
  31 #include <linux/interrupt.h>
  32 #include <linux/wait.h>
  33 #include <linux/i2c.h>
  34 #include <linux/of_device.h>
  35 #include "tpm.h"
  36
  37 /* I2C interface offsets */
  38 #define TPM_STS                0x00
  39 #define TPM_BURST_COUNT        0x01
  40 #define TPM_DATA_FIFO_W        0x20
  41 #define TPM_DATA_FIFO_R        0x40
  42 #define TPM_VID_DID_RID        0x60
  43 /* TPM command header size */
  44 #define TPM_HEADER_SIZE        10
  45 #define TPM_RETRY      5
  46 /*
  47  * I2C bus device maximum buffer size w/o counting I2C address or command
  48  * i.e. max size required for I2C write is 34 = addr, command, 32 bytes data
  49  */
  50 #define TPM_I2C_MAX_BUF_SIZE           32
  51 #define TPM_I2C_RETRY_COUNT            32
  52 #define TPM_I2C_BUS_DELAY              1000             /* usec */
  53 #define TPM_I2C_RETRY_DELAY_SHORT      (2 * 1000)       /* usec */
  54 #define TPM_I2C_RETRY_DELAY_LONG       (10 * 1000)      /* usec */
  55 #define TPM_I2C_DELAY_RANGE            300              /* usec */
  56
  57 #define OF_IS_TPM2 ((void *)1)
  58 #define I2C_IS_TPM2 1
  59
  60 struct priv_data {
  61         int irq;
  62         unsigned int intrs;
  63         wait_queue_head_t read_queue;
  64 };
  65
  66 static s32 i2c_nuvoton_read_buf(struct i2c_client *client, u8 offset, u8 size,
  67                                 u8 *data)
  68 {
  69         s32 status;
  70
  71         status = i2c_smbus_read_i2c_block_data(client, offset, size, data);
  72         dev_dbg(&client->dev,
  73                 "%s(offset=%u size=%u data=%*ph) -> sts=%d\n", __func__,
  74                 offset, size, (int)size, data, status);
  75         return status;
  76 }
  77
  78 static s32 i2c_nuvoton_write_buf(struct i2c_client *client, u8 offset, u8 size,
  79                                  u8 *data)
  80 {
  81         s32 status;
  82
  83         status = i2c_smbus_write_i2c_block_data(client, offset, size, data);
  84         dev_dbg(&client->dev,
  85                 "%s(offset=%u size=%u data=%*ph) -> sts=%d\n", __func__,
  86                 offset, size, (int)size, data, status);
  87         return status;
  88 }
  89
  90 #define TPM_STS_VALID          0x80
  91 #define TPM_STS_COMMAND_READY  0x40
  92 #define TPM_STS_GO             0x20
  93 #define TPM_STS_DATA_AVAIL     0x10
  94 #define TPM_STS_EXPECT         0x08
  95 #define TPM_STS_RESPONSE_RETRY 0x02
  96 #define TPM_STS_ERR_VAL        0x07    /* bit2...bit0 reads always 0 */
  97
  98 #define TPM_I2C_SHORT_TIMEOUT  750     /* ms */
  99 #define TPM_I2C_LONG_TIMEOUT   2000    /* 2 sec */
 100
 101 /* read TPM_STS register */
 102 static u8 i2c_nuvoton_read_status(struct tpm_chip *chip)
 103 {
 104         struct i2c_client *client = to_i2c_client(chip->dev.parent);
 105         s32 status;
 106         u8 data;
 107
 108         status = i2c_nuvoton_read_buf(client, TPM_STS, 1, &data);
 109         if (status <= 0) {
 110                 dev_err(&chip->dev, "%s() error return %d\n", __func__,
 111                         status);
 112                 data = TPM_STS_ERR_VAL;
 113         }
 114
 115         return data;
 116 }
 117
 118 /* write byte to TPM_STS register */
 119 static s32 i2c_nuvoton_write_status(struct i2c_client *client, u8 data)
 120 {
 121         s32 status;
 122         int i;
 123
 124         /* this causes the current command to be aborted */
 125         for (i = 0, status = -1; i < TPM_I2C_RETRY_COUNT && status < 0; i++) {
 126                 status = i2c_nuvoton_write_buf(client, TPM_STS, 1, &data);
 127                 if (status < 0)
 128                         usleep_range(TPM_I2C_BUS_DELAY, TPM_I2C_BUS_DELAY
 129                                      + TPM_I2C_DELAY_RANGE);
 130         }
 131         return status;
 132 }
 133
 134 /* write commandReady to TPM_STS register */
 135 static void i2c_nuvoton_ready(struct tpm_chip *chip)
 136 {
 137         struct i2c_client *client = to_i2c_client(chip->dev.parent);
 138         s32 status;
 139
 140         /* this causes the current command to be aborted */
 141         status = i2c_nuvoton_write_status(client, TPM_STS_COMMAND_READY);
 142         if (status < 0)
 143                 dev_err(&chip->dev,
 144                         "%s() fail to write TPM_STS.commandReady\n", __func__);
 145 }
 146
 147 /* read burstCount field from TPM_STS register
 148  * return -1 on fail to read */
 149 static int i2c_nuvoton_get_burstcount(struct i2c_client *client,
 150                                       struct tpm_chip *chip)
 151 {
 152         unsigned long stop = jiffies + chip->timeout_d;
 153         s32 status;
 154         int burst_count = -1;
 155         u8 data;
 156
 157         /* wait for burstcount to be non-zero */
 158         do {
 159                 /* in I2C burstCount is 1 byte */
 160                 status = i2c_nuvoton_read_buf(client, TPM_BURST_COUNT, 1,
 161                                               &data);
 162                 if (status > 0 && data > 0) {
 163                         burst_count = min_t(u8, TPM_I2C_MAX_BUF_SIZE, data);
 164                         break;
 165                 }
 166                 usleep_range(TPM_I2C_BUS_DELAY, TPM_I2C_BUS_DELAY
 167                              + TPM_I2C_DELAY_RANGE);
 168         } while (time_before(jiffies, stop));
 169
 170         return burst_count;
 171 }
 172
 173 /*
 174  * WPCT301/NPCT501/NPCT6XX SINT# supports only dataAvail
 175  * any call to this function which is not waiting for dataAvail will
 176  * set queue to NULL to avoid waiting for interrupt
 177  */
 178 static bool i2c_nuvoton_check_status(struct tpm_chip *chip, u8 mask, u8 value)
 179 {
 180         u8 status = i2c_nuvoton_read_status(chip);
 181         return (status != TPM_STS_ERR_VAL) && ((status & mask) == value);
 182 }
 183
 184 static int i2c_nuvoton_wait_for_stat(struct tpm_chip *chip, u8 mask, u8 value,
 185                                      u32 timeout, wait_queue_head_t *queue)
 186 {
 187         if ((chip->flags & TPM_CHIP_FLAG_IRQ) && queue) {
 188                 s32 rc;
 189                 struct priv_data *priv = dev_get_drvdata(&chip->dev);
 190                 unsigned int cur_intrs = priv->intrs;
 191
 192                 enable_irq(priv->irq);
 193                 rc = wait_event_interruptible_timeout(*queue,
 194                                                       cur_intrs != priv->intrs,
 195                                                       timeout);
 196                 if (rc > 0)
 197                         return 0;
 198                 /* At this point we know that the SINT pin is asserted, so we
 199                  * do not need to do i2c_nuvoton_check_status */
 200         } else {
 201                 unsigned long ten_msec, stop;
 202                 bool status_valid;
 203
 204                 /* check current status */
 205                 status_valid = i2c_nuvoton_check_status(chip, mask, value);
 206                 if (status_valid)
 207                         return 0;
 208
 209                 /* use polling to wait for the event */
 210                 ten_msec = jiffies + usecs_to_jiffies(TPM_I2C_RETRY_DELAY_LONG);
 211                 stop = jiffies + timeout;
 212                 do {
 213                         if (time_before(jiffies, ten_msec))
 214                                 usleep_range(TPM_I2C_RETRY_DELAY_SHORT,
 215                                              TPM_I2C_RETRY_DELAY_SHORT
 216                                              + TPM_I2C_DELAY_RANGE);
 217                         else
 218                                 usleep_range(TPM_I2C_RETRY_DELAY_LONG,
 219                                              TPM_I2C_RETRY_DELAY_LONG
 220                                              + TPM_I2C_DELAY_RANGE);
 221                         status_valid = i2c_nuvoton_check_status(chip, mask,
 222                                                                 value);
 223                         if (status_valid)
 224                                 return 0;
 225                 } while (time_before(jiffies, stop));
 226         }
 227         dev_err(&chip->dev, "%s(%02x, %02x) -> timeout\n", __func__, mask,
 228                 value);
 229         return -ETIMEDOUT;
 230 }
 231
 232 /* wait for dataAvail field to be set in the TPM_STS register */
 233 static int i2c_nuvoton_wait_for_data_avail(struct tpm_chip *chip, u32 timeout,
 234                                            wait_queue_head_t *queue)
 235 {
 236         return i2c_nuvoton_wait_for_stat(chip,
 237                                          TPM_STS_DATA_AVAIL | TPM_STS_VALID,
 238                                          TPM_STS_DATA_AVAIL | TPM_STS_VALID,
 239                                          timeout, queue);
 240 }
 241
 242 /* Read @count bytes into @buf from TPM_RD_FIFO register */
 243 static int i2c_nuvoton_recv_data(struct i2c_client *client,
 244                                  struct tpm_chip *chip, u8 *buf, size_t count)
 245 {
 246         struct priv_data *priv = dev_get_drvdata(&chip->dev);
 247         s32 rc;
 248         int burst_count, bytes2read, size = 0;
 249
 250         while (size < count &&
 251                i2c_nuvoton_wait_for_data_avail(chip,
 252                                                chip->timeout_c,
 253                                                &priv->read_queue) == 0) {
 254                 burst_count = i2c_nuvoton_get_burstcount(client, chip);
 255                 if (burst_count < 0) {
 256                         dev_err(&chip->dev,
 257                                 "%s() fail to read burstCount=%d\n", __func__,
 258                                 burst_count);
 259                         return -EIO;
 260                 }
 261                 bytes2read = min_t(size_t, burst_count, count - size);
 262                 rc = i2c_nuvoton_read_buf(client, TPM_DATA_FIFO_R,
 263                                           bytes2read, &buf[size]);
 264                 if (rc < 0) {
 265                         dev_err(&chip->dev,
 266                                 "%s() fail on i2c_nuvoton_read_buf()=%d\n",
 267                                 __func__, rc);
 268                         return -EIO;
 269                 }
 270                 dev_dbg(&chip->dev, "%s(%d):", __func__, bytes2read);
 271                 size += bytes2read;
 272         }
 273
 274         return size;
 275 }
 276
 277 /* Read TPM command results */
 278 static int i2c_nuvoton_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 279 {
 280         struct priv_data *priv = dev_get_drvdata(&chip->dev);
 281         struct device *dev = chip->dev.parent;
 282         struct i2c_client *client = to_i2c_client(dev);
 283         s32 rc;
 284         int status;
 285         int burst_count;
 286         int retries;
 287         int size = 0;
 288         u32 expected;
 289
 290         if (count < TPM_HEADER_SIZE) {
 291                 i2c_nuvoton_ready(chip);    /* return to idle */
 292                 dev_err(dev, "%s() count < header size\n", __func__);
 293                 return -EIO;
 294         }
 295         for (retries = 0; retries < TPM_RETRY; retries++) {
 296                 if (retries > 0) {
 297                         /* if this is not the first trial, set responseRetry */
 298                         i2c_nuvoton_write_status(client,
 299                                                  TPM_STS_RESPONSE_RETRY);
 300                 }
 301                 /*
 302                  * read first available (> 10 bytes), including:
 303                  * tag, paramsize, and result
 304                  */
 305                 status = i2c_nuvoton_wait_for_data_avail(
 306                         chip, chip->timeout_c, &priv->read_queue);
 307                 if (status != 0) {
 308                         dev_err(dev, "%s() timeout on dataAvail\n", __func__);
 309                         size = -ETIMEDOUT;
 310                         continue;
 311                 }
 312                 burst_count = i2c_nuvoton_get_burstcount(client, chip);
 313                 if (burst_count < 0) {
 314                         dev_err(dev, "%s() fail to get burstCount\n", __func__);
 315                         size = -EIO;
 316                         continue;
 317                 }
 318                 size = i2c_nuvoton_recv_data(client, chip, buf,
 319                                              burst_count);
 320                 if (size < TPM_HEADER_SIZE) {
 321                         dev_err(dev, "%s() fail to read header\n", __func__);
 322                         size = -EIO;
 323                         continue;
 324                 }
 325                 /*
 326                  * convert number of expected bytes field from big endian 32 bit
 327                  * to machine native
 328                  */
 329                 expected = be32_to_cpu(*(__be32 *) (buf + 2));
 330                 if (expected > count || expected < size) {
 331                         dev_err(dev, "%s() expected > count\n", __func__);
 332                         size = -EIO;
 333                         continue;
 334                 }
 335                 rc = i2c_nuvoton_recv_data(client, chip, &buf[size],
 336                                            expected - size);
 337                 size += rc;
 338                 if (rc < 0 || size < expected) {
 339                         dev_err(dev, "%s() fail to read remainder of result\n",
 340                                 __func__);
 341                         size = -EIO;
 342                         continue;
 343                 }
 344                 if (i2c_nuvoton_wait_for_stat(
 345                             chip, TPM_STS_VALID | TPM_STS_DATA_AVAIL,
 346                             TPM_STS_VALID, chip->timeout_c,
 347                             NULL)) {
 348                         dev_err(dev, "%s() error left over data\n", __func__);
 349                         size = -ETIMEDOUT;
 350                         continue;
 351                 }
 352                 break;
 353         }
 354         i2c_nuvoton_ready(chip);
 355         dev_dbg(&chip->dev, "%s() -> %d\n", __func__, size);
 356         return size;
 357 }
 358
 359 /*
 360  * Send TPM command.
 361  *
 362  * If interrupts are used (signaled by an irq set in the vendor structure)
 363  * tpm.c can skip polling for the data to be available as the interrupt is
 364  * waited for here
 365  */
 366 static int i2c_nuvoton_send(struct tpm_chip *chip, u8 *buf, size_t len)
 367 {
 368         struct priv_data *priv = dev_get_drvdata(&chip->dev);
 369         struct device *dev = chip->dev.parent;
 370         struct i2c_client *client = to_i2c_client(dev);
 371         u32 ordinal;
 372         unsigned long duration;
 373         size_t count = 0;
 374         int burst_count, bytes2write, retries, rc = -EIO;
 375
 376         for (retries = 0; retries < TPM_RETRY; retries++) {
 377                 i2c_nuvoton_ready(chip);
 378                 if (i2c_nuvoton_wait_for_stat(chip, TPM_STS_COMMAND_READY,
 379                                               TPM_STS_COMMAND_READY,
 380                                               chip->timeout_b, NULL)) {
 381                         dev_err(dev, "%s() timeout on commandReady\n",
 382                                 __func__);
 383                         rc = -EIO;
 384                         continue;
 385                 }
 386                 rc = 0;
 387                 while (count < len - 1) {
 388                         burst_count = i2c_nuvoton_get_burstcount(client,
 389                                                                  chip);
 390                         if (burst_count < 0) {
 391                                 dev_err(dev, "%s() fail get burstCount\n",
 392                                         __func__);
 393                                 rc = -EIO;
 394                                 break;
 395                         }
 396                         bytes2write = min_t(size_t, burst_count,
 397                                             len - 1 - count);
 398                         rc = i2c_nuvoton_write_buf(client, TPM_DATA_FIFO_W,
 399                                                    bytes2write, &buf[count]);
 400                         if (rc < 0) {
 401                                 dev_err(dev, "%s() fail i2cWriteBuf\n",
 402                                         __func__);
 403                                 break;
 404                         }
 405                         dev_dbg(dev, "%s(%d):", __func__, bytes2write);
 406                         count += bytes2write;
 407                         rc = i2c_nuvoton_wait_for_stat(chip,
 408                                                        TPM_STS_VALID |
 409                                                        TPM_STS_EXPECT,
 410                                                        TPM_STS_VALID |
 411                                                        TPM_STS_EXPECT,
 412                                                        chip->timeout_c,
 413                                                        NULL);
 414                         if (rc < 0) {
 415                                 dev_err(dev, "%s() timeout on Expect\n",
 416                                         __func__);
 417                                 rc = -ETIMEDOUT;
 418                                 break;
 419                         }
 420                 }
 421                 if (rc < 0)
 422                         continue;
 423
 424                 /* write last byte */
 425                 rc = i2c_nuvoton_write_buf(client, TPM_DATA_FIFO_W, 1,
 426                                            &buf[count]);
 427                 if (rc < 0) {
 428                         dev_err(dev, "%s() fail to write last byte\n",
 429                                 __func__);
 430                         rc = -EIO;
 431                         continue;
 432                 }
 433                 dev_dbg(dev, "%s(last): %02x", __func__, buf[count]);
 434                 rc = i2c_nuvoton_wait_for_stat(chip,
 435                                                TPM_STS_VALID | TPM_STS_EXPECT,
 436                                                TPM_STS_VALID,
 437                                                chip->timeout_c, NULL);
 438                 if (rc) {
 439                         dev_err(dev, "%s() timeout on Expect to clear\n",
 440                                 __func__);
 441                         rc = -ETIMEDOUT;
 442                         continue;
 443                 }
 444                 break;
 445         }
 446         if (rc < 0) {
 447                 /* retries == TPM_RETRY */
 448                 i2c_nuvoton_ready(chip);
 449                 return rc;
 450         }
 451         /* execute the TPM command */
 452         rc = i2c_nuvoton_write_status(client, TPM_STS_GO);
 453         if (rc < 0) {
 454                 dev_err(dev, "%s() fail to write Go\n", __func__);
 455                 i2c_nuvoton_ready(chip);
 456                 return rc;
 457         }
 458         ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
 459         if (chip->flags & TPM_CHIP_FLAG_TPM2)
 460                 duration = tpm2_calc_ordinal_duration(chip, ordinal);
 461         else
 462                 duration = tpm_calc_ordinal_duration(chip, ordinal);
 463
 464         rc = i2c_nuvoton_wait_for_data_avail(chip, duration, &priv->read_queue);
 465         if (rc) {
 466                 dev_err(dev, "%s() timeout command duration\n", __func__);
 467                 i2c_nuvoton_ready(chip);
 468                 return rc;
 469         }
 470
 471         dev_dbg(dev, "%s() -> %zd\n", __func__, len);
 472         return len;
 473 }
 474
 475 static bool i2c_nuvoton_req_canceled(struct tpm_chip *chip, u8 status)
 476 {
 477         return (status == TPM_STS_COMMAND_READY);
 478 }
 479
 480 static const struct tpm_class_ops tpm_i2c = {
 481         .flags = TPM_OPS_AUTO_STARTUP,
 482         .status = i2c_nuvoton_read_status,
 483         .recv = i2c_nuvoton_recv,
 484         .send = i2c_nuvoton_send,
 485         .cancel = i2c_nuvoton_ready,
 486         .req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
 487         .req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
 488         .req_canceled = i2c_nuvoton_req_canceled,
 489 };
 490
 491 /* The only purpose for the handler is to signal to any waiting threads that
 492  * the interrupt is currently being asserted. The driver does not do any
 493  * processing triggered by interrupts, and the chip provides no way to mask at
 494  * the source (plus that would be slow over I2C). Run the IRQ as a one-shot,
 495  * this means it cannot be shared. */
 496 static irqreturn_t i2c_nuvoton_int_handler(int dummy, void *dev_id)
 497 {
 498         struct tpm_chip *chip = dev_id;
 499         struct priv_data *priv = dev_get_drvdata(&chip->dev);
 500
 501         priv->intrs++;
 502         wake_up(&priv->read_queue);
 503         disable_irq_nosync(priv->irq);
 504         return IRQ_HANDLED;
 505 }
 506
 507 static int get_vid(struct i2c_client *client, u32 *res)
 508 {
 509         static const u8 vid_did_rid_value[] = { 0x50, 0x10, 0xfe };
 510         u32 temp;
 511         s32 rc;
 512
 513         if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 514                 return -ENODEV;
 515         rc = i2c_nuvoton_read_buf(client, TPM_VID_DID_RID, 4, (u8 *)&temp);
 516         if (rc < 0)
 517                 return rc;
 518
 519         /* check WPCT301 values - ignore RID */
 520         if (memcmp(&temp, vid_did_rid_value, sizeof(vid_did_rid_value))) {
 521                 /*
 522                  * f/w rev 2.81 has an issue where the VID_DID_RID is not
 523                  * reporting the right value. so give it another chance at
 524                  * offset 0x20 (FIFO_W).
 525                  */
 526                 rc = i2c_nuvoton_read_buf(client, TPM_DATA_FIFO_W, 4,
 527                                           (u8 *) (&temp));
 528                 if (rc < 0)
 529                         return rc;
 530
 531                 /* check WPCT301 values - ignore RID */
 532                 if (memcmp(&temp, vid_did_rid_value,
 533                            sizeof(vid_did_rid_value)))
 534                         return -ENODEV;
 535         }
 536
 537         *res = temp;
 538         return 0;
 539 }
 540
 541 static int i2c_nuvoton_probe(struct i2c_client *client,
 542                              const struct i2c_device_id *id)
 543 {
 544         int rc;
 545         struct tpm_chip *chip;
 546         struct device *dev = &client->dev;
 547         struct priv_data *priv;
 548         u32 vid = 0;
 549
 550         rc = get_vid(client, &vid);
 551         if (rc)
 552                 return rc;
 553
 554         dev_info(dev, "VID: %04X DID: %02X RID: %02X\n", (u16) vid,
 555                  (u8) (vid >> 16), (u8) (vid >> 24));
 556
 557         chip = tpmm_chip_alloc(dev, &tpm_i2c);
 558         if (IS_ERR(chip))
 559                 return PTR_ERR(chip);
 560
 561         priv = devm_kzalloc(dev, sizeof(struct priv_data), GFP_KERNEL);
 562         if (!priv)
 563                 return -ENOMEM;
 564
 565         if (dev->of_node) {
 566                 const struct of_device_id *of_id;
 567
 568                 of_id = of_match_device(dev->driver->of_match_table, dev);
 569                 if (of_id && of_id->data == OF_IS_TPM2)
 570                         chip->flags |= TPM_CHIP_FLAG_TPM2;
 571         } else
 572                 if (id->driver_data == I2C_IS_TPM2)
 573                         chip->flags |= TPM_CHIP_FLAG_TPM2;
 574
 575         init_waitqueue_head(&priv->read_queue);
 576
 577         /* Default timeouts */
 578         chip->timeout_a = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
 579         chip->timeout_b = msecs_to_jiffies(TPM_I2C_LONG_TIMEOUT);
 580         chip->timeout_c = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
 581         chip->timeout_d = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
 582
 583         dev_set_drvdata(&chip->dev, priv);
 584
 585         /*
 586          * I2C intfcaps (interrupt capabilitieis) in the chip are hard coded to:
 587          *   TPM_INTF_INT_LEVEL_LOW | TPM_INTF_DATA_AVAIL_INT
 588          * The IRQ should be set in the i2c_board_info (which is done
 589          * automatically in of_i2c_register_devices, for device tree users */
 590         priv->irq = client->irq;
 591         if (client->irq) {
 592                 dev_dbg(dev, "%s() priv->irq\n", __func__);
 593                 rc = devm_request_irq(dev, client->irq,
 594                                       i2c_nuvoton_int_handler,
 595                                       IRQF_TRIGGER_LOW,
 596                                       dev_name(&chip->dev),
 597                                       chip);
 598                 if (rc) {
 599                         dev_err(dev, "%s() Unable to request irq: %d for use\n",
 600                                 __func__, priv->irq);
 601                         priv->irq = 0;
 602                 } else {
 603                         chip->flags |= TPM_CHIP_FLAG_IRQ;
 604                         /* Clear any pending interrupt */
 605                         i2c_nuvoton_ready(chip);
 606                         /* - wait for TPM_STS==0xA0 (stsValid, commandReady) */
 607                         rc = i2c_nuvoton_wait_for_stat(chip,
 608                                                        TPM_STS_COMMAND_READY,
 609                                                        TPM_STS_COMMAND_READY,
 610                                                        chip->timeout_b,
 611                                                        NULL);
 612                         if (rc == 0) {
 613                                 /*
 614                                  * TIS is in ready state
 615                                  * write dummy byte to enter reception state
 616                                  * TPM_DATA_FIFO_W <- rc (0)
 617                                  */
 618                                 rc = i2c_nuvoton_write_buf(client,
 619                                                            TPM_DATA_FIFO_W,
 620                                                            1, (u8 *) (&rc));
 621                                 if (rc < 0)
 622                                         return rc;
 623                                 /* TPM_STS <- 0x40 (commandReady) */
 624                                 i2c_nuvoton_ready(chip);
 625                         } else {
 626                                 /*
 627                                  * timeout_b reached - command was
 628                                  * aborted. TIS should now be in idle state -
 629                                  * only TPM_STS_VALID should be set
 630                                  */
 631                                 if (i2c_nuvoton_read_status(chip) !=
 632                                     TPM_STS_VALID)
 633                                         return -EIO;
 634                         }
 635                 }
 636         }
 637
 638         return tpm_chip_register(chip);
 639 }
 640
 641 static int i2c_nuvoton_remove(struct i2c_client *client)
 642 {
 643         struct tpm_chip *chip = i2c_get_clientdata(client);
 644
 645         tpm_chip_unregister(chip);
 646         return 0;
 647 }
 648
 649 static const struct i2c_device_id i2c_nuvoton_id[] = {
 650         {"tpm_i2c_nuvoton"},
 651         {"tpm2_i2c_nuvoton", .driver_data = I2C_IS_TPM2},
 652         {}
 653 };
 654 MODULE_DEVICE_TABLE(i2c, i2c_nuvoton_id);
 655
 656 #ifdef CONFIG_OF
 657 static const struct of_device_id i2c_nuvoton_of_match[] = {
 658         {.compatible = "nuvoton,npct501"},
 659         {.compatible = "winbond,wpct301"},
 660         {.compatible = "nuvoton,npct601", .data = OF_IS_TPM2},
 661         {},
 662 };
 663 MODULE_DEVICE_TABLE(of, i2c_nuvoton_of_match);
 664 #endif
 665
 666 static SIMPLE_DEV_PM_OPS(i2c_nuvoton_pm_ops, tpm_pm_suspend, tpm_pm_resume);
 667
 668 static struct i2c_driver i2c_nuvoton_driver = {
 669         .id_table = i2c_nuvoton_id,
 670         .probe = i2c_nuvoton_probe,
 671         .remove = i2c_nuvoton_remove,
 672         .driver = {
 673                 .name = "tpm_i2c_nuvoton",
 674                 .pm = &i2c_nuvoton_pm_ops,
 675                 .of_match_table = of_match_ptr(i2c_nuvoton_of_match),
 676         },
 677 };
 678
 679 module_i2c_driver(i2c_nuvoton_driver);
 680
 681 MODULE_AUTHOR("Dan Morav (dan.morav@nuvoton.com)");
 682 MODULE_DESCRIPTION("Nuvoton TPM I2C Driver");
 683 MODULE_LICENSE("GPL");