3 * Bluetooth HCI UART driver for Intel devices
5 * Copyright (C) 2015 Intel Corporation
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 #include <linux/kernel.h>
25 #include <linux/errno.h>
26 #include <linux/skbuff.h>
27 #include <linux/firmware.h>
28 #include <linux/module.h>
29 #include <linux/wait.h>
30 #include <linux/tty.h>
31 #include <linux/platform_device.h>
32 #include <linux/gpio/consumer.h>
33 #include <linux/acpi.h>
34 #include <linux/interrupt.h>
35 #include <linux/pm_runtime.h>
37 #include <net/bluetooth/bluetooth.h>
38 #include <net/bluetooth/hci_core.h>
43 #define STATE_BOOTLOADER 0
44 #define STATE_DOWNLOADING 1
45 #define STATE_FIRMWARE_LOADED 2
46 #define STATE_FIRMWARE_FAILED 3
47 #define STATE_BOOTING 4
48 #define STATE_LPM_ENABLED 5
49 #define STATE_TX_ACTIVE 6
50 #define STATE_SUSPENDED 7
51 #define STATE_LPM_TRANSACTION 8
53 #define HCI_LPM_WAKE_PKT 0xf0
54 #define HCI_LPM_PKT 0xf1
55 #define HCI_LPM_MAX_SIZE 10
56 #define HCI_LPM_HDR_SIZE HCI_EVENT_HDR_SIZE
58 #define LPM_OP_TX_NOTIFY 0x00
59 #define LPM_OP_SUSPEND_ACK 0x02
60 #define LPM_OP_RESUME_ACK 0x03
62 #define LPM_SUSPEND_DELAY_MS 1000
71 struct list_head list;
72 struct platform_device *pdev;
73 struct gpio_desc *reset;
79 static LIST_HEAD(intel_device_list);
80 static DEFINE_MUTEX(intel_device_list_lock);
83 struct sk_buff *rx_skb;
84 struct sk_buff_head txq;
85 struct work_struct busy_work;
90 static u8 intel_convert_speed(unsigned int speed)
122 static int intel_wait_booting(struct hci_uart *hu)
124 struct intel_data *intel = hu->priv;
127 err = wait_on_bit_timeout(&intel->flags, STATE_BOOTING,
129 msecs_to_jiffies(1000));
132 bt_dev_err(hu->hdev, "Device boot interrupted");
137 bt_dev_err(hu->hdev, "Device boot timeout");
145 static int intel_wait_lpm_transaction(struct hci_uart *hu)
147 struct intel_data *intel = hu->priv;
150 err = wait_on_bit_timeout(&intel->flags, STATE_LPM_TRANSACTION,
152 msecs_to_jiffies(1000));
155 bt_dev_err(hu->hdev, "LPM transaction interrupted");
160 bt_dev_err(hu->hdev, "LPM transaction timeout");
167 static int intel_lpm_suspend(struct hci_uart *hu)
169 static const u8 suspend[] = { 0x01, 0x01, 0x01 };
170 struct intel_data *intel = hu->priv;
173 if (!test_bit(STATE_LPM_ENABLED, &intel->flags) ||
174 test_bit(STATE_SUSPENDED, &intel->flags))
177 if (test_bit(STATE_TX_ACTIVE, &intel->flags))
180 bt_dev_dbg(hu->hdev, "Suspending");
182 skb = bt_skb_alloc(sizeof(suspend), GFP_KERNEL);
184 bt_dev_err(hu->hdev, "Failed to alloc memory for LPM packet");
188 memcpy(skb_put(skb, sizeof(suspend)), suspend, sizeof(suspend));
189 bt_cb(skb)->pkt_type = HCI_LPM_PKT;
191 set_bit(STATE_LPM_TRANSACTION, &intel->flags);
193 /* LPM flow is a priority, enqueue packet at list head */
194 skb_queue_head(&intel->txq, skb);
195 hci_uart_tx_wakeup(hu);
197 intel_wait_lpm_transaction(hu);
198 /* Even in case of failure, continue and test the suspended flag */
200 clear_bit(STATE_LPM_TRANSACTION, &intel->flags);
202 if (!test_bit(STATE_SUSPENDED, &intel->flags)) {
203 bt_dev_err(hu->hdev, "Device suspend error");
207 bt_dev_dbg(hu->hdev, "Suspended");
209 hci_uart_set_flow_control(hu, true);
214 static int intel_lpm_resume(struct hci_uart *hu)
216 struct intel_data *intel = hu->priv;
219 if (!test_bit(STATE_LPM_ENABLED, &intel->flags) ||
220 !test_bit(STATE_SUSPENDED, &intel->flags))
223 bt_dev_dbg(hu->hdev, "Resuming");
225 hci_uart_set_flow_control(hu, false);
227 skb = bt_skb_alloc(0, GFP_KERNEL);
229 bt_dev_err(hu->hdev, "Failed to alloc memory for LPM packet");
233 bt_cb(skb)->pkt_type = HCI_LPM_WAKE_PKT;
235 set_bit(STATE_LPM_TRANSACTION, &intel->flags);
237 /* LPM flow is a priority, enqueue packet at list head */
238 skb_queue_head(&intel->txq, skb);
239 hci_uart_tx_wakeup(hu);
241 intel_wait_lpm_transaction(hu);
242 /* Even in case of failure, continue and test the suspended flag */
244 clear_bit(STATE_LPM_TRANSACTION, &intel->flags);
246 if (test_bit(STATE_SUSPENDED, &intel->flags)) {
247 bt_dev_err(hu->hdev, "Device resume error");
251 bt_dev_dbg(hu->hdev, "Resumed");
255 #endif /* CONFIG_PM */
257 static int intel_lpm_host_wake(struct hci_uart *hu)
259 static const u8 lpm_resume_ack[] = { LPM_OP_RESUME_ACK, 0x00 };
260 struct intel_data *intel = hu->priv;
263 hci_uart_set_flow_control(hu, false);
265 clear_bit(STATE_SUSPENDED, &intel->flags);
267 skb = bt_skb_alloc(sizeof(lpm_resume_ack), GFP_KERNEL);
269 bt_dev_err(hu->hdev, "Failed to alloc memory for LPM packet");
273 memcpy(skb_put(skb, sizeof(lpm_resume_ack)), lpm_resume_ack,
274 sizeof(lpm_resume_ack));
275 bt_cb(skb)->pkt_type = HCI_LPM_PKT;
277 /* LPM flow is a priority, enqueue packet at list head */
278 skb_queue_head(&intel->txq, skb);
279 hci_uart_tx_wakeup(hu);
281 bt_dev_dbg(hu->hdev, "Resumed by controller");
286 static irqreturn_t intel_irq(int irq, void *dev_id)
288 struct intel_device *idev = dev_id;
290 dev_info(&idev->pdev->dev, "hci_intel irq\n");
292 mutex_lock(&idev->hu_lock);
294 intel_lpm_host_wake(idev->hu);
295 mutex_unlock(&idev->hu_lock);
297 /* Host/Controller are now LPM resumed, trigger a new delayed suspend */
298 pm_runtime_get(&idev->pdev->dev);
299 pm_runtime_mark_last_busy(&idev->pdev->dev);
300 pm_runtime_put_autosuspend(&idev->pdev->dev);
305 static int intel_set_power(struct hci_uart *hu, bool powered)
313 mutex_lock(&intel_device_list_lock);
315 list_for_each(p, &intel_device_list) {
316 struct intel_device *idev = list_entry(p, struct intel_device,
319 /* tty device and pdev device should share the same parent
320 * which is the UART port.
322 if (hu->tty->dev->parent != idev->pdev->dev.parent)
330 BT_INFO("hu %p, Switching compatible pm device (%s) to %u",
331 hu, dev_name(&idev->pdev->dev), powered);
333 gpiod_set_value(idev->reset, powered);
335 /* Provide to idev a hu reference which is used to run LPM
336 * transactions (lpm suspend/resume) from PM callbacks.
337 * hu needs to be protected against concurrent removing during
340 mutex_lock(&idev->hu_lock);
341 idev->hu = powered ? hu : NULL;
342 mutex_unlock(&idev->hu_lock);
347 if (powered && device_can_wakeup(&idev->pdev->dev)) {
348 err = devm_request_threaded_irq(&idev->pdev->dev,
352 "bt-host-wake", idev);
354 BT_ERR("hu %p, unable to allocate irq-%d",
359 device_wakeup_enable(&idev->pdev->dev);
361 pm_runtime_set_active(&idev->pdev->dev);
362 pm_runtime_use_autosuspend(&idev->pdev->dev);
363 pm_runtime_set_autosuspend_delay(&idev->pdev->dev,
364 LPM_SUSPEND_DELAY_MS);
365 pm_runtime_enable(&idev->pdev->dev);
366 } else if (!powered && device_may_wakeup(&idev->pdev->dev)) {
367 devm_free_irq(&idev->pdev->dev, idev->irq, idev);
368 device_wakeup_disable(&idev->pdev->dev);
370 pm_runtime_disable(&idev->pdev->dev);
374 mutex_unlock(&intel_device_list_lock);
379 static void intel_busy_work(struct work_struct *work)
382 struct intel_data *intel = container_of(work, struct intel_data,
385 if (!intel->hu->tty->dev)
388 /* Link is busy, delay the suspend */
389 mutex_lock(&intel_device_list_lock);
390 list_for_each(p, &intel_device_list) {
391 struct intel_device *idev = list_entry(p, struct intel_device,
394 if (intel->hu->tty->dev->parent == idev->pdev->dev.parent) {
395 pm_runtime_get(&idev->pdev->dev);
396 pm_runtime_mark_last_busy(&idev->pdev->dev);
397 pm_runtime_put_autosuspend(&idev->pdev->dev);
401 mutex_unlock(&intel_device_list_lock);
404 static int intel_open(struct hci_uart *hu)
406 struct intel_data *intel;
410 if (!hci_uart_has_flow_control(hu))
413 intel = kzalloc(sizeof(*intel), GFP_KERNEL);
417 skb_queue_head_init(&intel->txq);
418 INIT_WORK(&intel->busy_work, intel_busy_work);
424 if (!intel_set_power(hu, true))
425 set_bit(STATE_BOOTING, &intel->flags);
430 static int intel_close(struct hci_uart *hu)
432 struct intel_data *intel = hu->priv;
436 cancel_work_sync(&intel->busy_work);
438 intel_set_power(hu, false);
440 skb_queue_purge(&intel->txq);
441 kfree_skb(intel->rx_skb);
448 static int intel_flush(struct hci_uart *hu)
450 struct intel_data *intel = hu->priv;
454 skb_queue_purge(&intel->txq);
459 static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
462 struct hci_event_hdr *hdr;
463 struct hci_ev_cmd_complete *evt;
465 skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_ATOMIC);
469 hdr = (struct hci_event_hdr *)skb_put(skb, sizeof(*hdr));
470 hdr->evt = HCI_EV_CMD_COMPLETE;
471 hdr->plen = sizeof(*evt) + 1;
473 evt = (struct hci_ev_cmd_complete *)skb_put(skb, sizeof(*evt));
475 evt->opcode = cpu_to_le16(opcode);
477 *skb_put(skb, 1) = 0x00;
479 bt_cb(skb)->pkt_type = HCI_EVENT_PKT;
481 return hci_recv_frame(hdev, skb);
484 static int intel_set_baudrate(struct hci_uart *hu, unsigned int speed)
486 struct intel_data *intel = hu->priv;
487 struct hci_dev *hdev = hu->hdev;
488 u8 speed_cmd[] = { 0x06, 0xfc, 0x01, 0x00 };
492 /* This can be the first command sent to the chip, check
493 * that the controller is ready.
495 err = intel_wait_booting(hu);
497 clear_bit(STATE_BOOTING, &intel->flags);
499 /* In case of timeout, try to continue anyway */
500 if (err && err != ETIMEDOUT)
503 bt_dev_info(hdev, "Change controller speed to %d", speed);
505 speed_cmd[3] = intel_convert_speed(speed);
506 if (speed_cmd[3] == 0xff) {
507 bt_dev_err(hdev, "Unsupported speed");
511 /* Device will not accept speed change if Intel version has not been
512 * previously requested.
514 skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
516 bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
522 skb = bt_skb_alloc(sizeof(speed_cmd), GFP_KERNEL);
524 bt_dev_err(hdev, "Failed to alloc memory for baudrate packet");
528 memcpy(skb_put(skb, sizeof(speed_cmd)), speed_cmd, sizeof(speed_cmd));
529 bt_cb(skb)->pkt_type = HCI_COMMAND_PKT;
531 hci_uart_set_flow_control(hu, true);
533 skb_queue_tail(&intel->txq, skb);
534 hci_uart_tx_wakeup(hu);
536 /* wait 100ms to change baudrate on controller side */
539 hci_uart_set_baudrate(hu, speed);
540 hci_uart_set_flow_control(hu, false);
545 static int intel_setup(struct hci_uart *hu)
547 static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01,
548 0x00, 0x08, 0x04, 0x00 };
549 static const u8 lpm_param[] = { 0x03, 0x07, 0x01, 0x0b };
550 struct intel_data *intel = hu->priv;
551 struct intel_device *idev = NULL;
552 struct hci_dev *hdev = hu->hdev;
554 struct intel_version *ver;
555 struct intel_boot_params *params;
557 const struct firmware *fw;
561 ktime_t calltime, delta, rettime;
562 unsigned long long duration;
563 unsigned int init_speed, oper_speed;
564 int speed_change = 0;
567 bt_dev_dbg(hdev, "start intel_setup");
569 hu->hdev->set_diag = btintel_set_diag;
570 hu->hdev->set_bdaddr = btintel_set_bdaddr;
572 calltime = ktime_get();
575 init_speed = hu->init_speed;
577 init_speed = hu->proto->init_speed;
580 oper_speed = hu->oper_speed;
582 oper_speed = hu->proto->oper_speed;
584 if (oper_speed && init_speed && oper_speed != init_speed)
587 /* Check that the controller is ready */
588 err = intel_wait_booting(hu);
590 clear_bit(STATE_BOOTING, &intel->flags);
592 /* In case of timeout, try to continue anyway */
593 if (err && err != ETIMEDOUT)
596 set_bit(STATE_BOOTLOADER, &intel->flags);
598 /* Read the Intel version information to determine if the device
599 * is in bootloader mode or if it already has operational firmware
602 skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
604 bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
609 if (skb->len != sizeof(*ver)) {
610 bt_dev_err(hdev, "Intel version event size mismatch");
615 ver = (struct intel_version *)skb->data;
617 bt_dev_err(hdev, "Intel version command failure (%02x)",
619 err = -bt_to_errno(ver->status);
624 /* The hardware platform number has a fixed value of 0x37 and
625 * for now only accept this single value.
627 if (ver->hw_platform != 0x37) {
628 bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
634 /* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is
635 * supported by this firmware loading method. This check has been
636 * put in place to ensure correct forward compatibility options
637 * when newer hardware variants come along.
639 if (ver->hw_variant != 0x0b) {
640 bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
646 btintel_version_info(hdev, ver);
648 /* The firmware variant determines if the device is in bootloader
649 * mode or is running operational firmware. The value 0x06 identifies
650 * the bootloader and the value 0x23 identifies the operational
653 * When the operational firmware is already present, then only
654 * the check for valid Bluetooth device address is needed. This
655 * determines if the device will be added as configured or
656 * unconfigured controller.
658 * It is not possible to use the Secure Boot Parameters in this
659 * case since that command is only available in bootloader mode.
661 if (ver->fw_variant == 0x23) {
663 clear_bit(STATE_BOOTLOADER, &intel->flags);
664 btintel_check_bdaddr(hdev);
668 /* If the device is not in bootloader mode, then the only possible
669 * choice is to return an error and abort the device initialization.
671 if (ver->fw_variant != 0x06) {
672 bt_dev_err(hdev, "Unsupported Intel firmware variant (%u)",
680 /* Read the secure boot parameters to identify the operating
681 * details of the bootloader.
683 skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
685 bt_dev_err(hdev, "Reading Intel boot parameters failed (%ld)",
690 if (skb->len != sizeof(*params)) {
691 bt_dev_err(hdev, "Intel boot parameters size mismatch");
696 params = (struct intel_boot_params *)skb->data;
697 if (params->status) {
698 bt_dev_err(hdev, "Intel boot parameters command failure (%02x)",
700 err = -bt_to_errno(params->status);
705 bt_dev_info(hdev, "Device revision is %u",
706 le16_to_cpu(params->dev_revid));
708 bt_dev_info(hdev, "Secure boot is %s",
709 params->secure_boot ? "enabled" : "disabled");
711 bt_dev_info(hdev, "Minimum firmware build %u week %u %u",
712 params->min_fw_build_nn, params->min_fw_build_cw,
713 2000 + params->min_fw_build_yy);
715 /* It is required that every single firmware fragment is acknowledged
716 * with a command complete event. If the boot parameters indicate
717 * that this bootloader does not send them, then abort the setup.
719 if (params->limited_cce != 0x00) {
720 bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)",
721 params->limited_cce);
726 /* If the OTP has no valid Bluetooth device address, then there will
727 * also be no valid address for the operational firmware.
729 if (!bacmp(¶ms->otp_bdaddr, BDADDR_ANY)) {
730 bt_dev_info(hdev, "No device address configured");
731 set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
734 /* With this Intel bootloader only the hardware variant and device
735 * revision information are used to select the right firmware.
737 * Currently this bootloader support is limited to hardware variant
738 * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b).
740 snprintf(fwname, sizeof(fwname), "/*(DEBLOBBED)*/",
741 le16_to_cpu(params->dev_revid));
743 err = reject_firmware(&fw, fwname, &hdev->dev);
745 bt_dev_err(hdev, "Failed to load Intel firmware file (%d)",
751 bt_dev_info(hdev, "Found device firmware: %s", fwname);
753 /* Save the DDC file name for later */
754 snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.ddc",
755 le16_to_cpu(params->dev_revid));
759 if (fw->size < 644) {
760 bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
766 set_bit(STATE_DOWNLOADING, &intel->flags);
768 /* Start the firmware download transaction with the Init fragment
769 * represented by the 128 bytes of CSS header.
771 err = btintel_secure_send(hdev, 0x00, 128, fw->data);
773 bt_dev_err(hdev, "Failed to send firmware header (%d)", err);
777 /* Send the 256 bytes of public key information from the firmware
778 * as the PKey fragment.
780 err = btintel_secure_send(hdev, 0x03, 256, fw->data + 128);
782 bt_dev_err(hdev, "Failed to send firmware public key (%d)",
787 /* Send the 256 bytes of signature information from the firmware
788 * as the Sign fragment.
790 err = btintel_secure_send(hdev, 0x02, 256, fw->data + 388);
792 bt_dev_err(hdev, "Failed to send firmware signature (%d)",
797 fw_ptr = fw->data + 644;
800 while (fw_ptr - fw->data < fw->size) {
801 struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
803 frag_len += sizeof(*cmd) + cmd->plen;
805 bt_dev_dbg(hdev, "Patching %td/%zu", (fw_ptr - fw->data),
808 /* The parameter length of the secure send command requires
809 * a 4 byte alignment. It happens so that the firmware file
810 * contains proper Intel_NOP commands to align the fragments
813 * Send set of commands with 4 byte alignment from the
814 * firmware data buffer as a single Data fragement.
819 /* Send each command from the firmware data buffer as
820 * a single Data fragment.
822 err = btintel_secure_send(hdev, 0x01, frag_len, fw_ptr);
824 bt_dev_err(hdev, "Failed to send firmware data (%d)",
833 set_bit(STATE_FIRMWARE_LOADED, &intel->flags);
835 bt_dev_info(hdev, "Waiting for firmware download to complete");
837 /* Before switching the device into operational mode and with that
838 * booting the loaded firmware, wait for the bootloader notification
839 * that all fragments have been successfully received.
841 * When the event processing receives the notification, then the
842 * STATE_DOWNLOADING flag will be cleared.
844 * The firmware loading should not take longer than 5 seconds
845 * and thus just timeout if that happens and fail the setup
848 err = wait_on_bit_timeout(&intel->flags, STATE_DOWNLOADING,
850 msecs_to_jiffies(5000));
852 bt_dev_err(hdev, "Firmware loading interrupted");
858 bt_dev_err(hdev, "Firmware loading timeout");
863 if (test_bit(STATE_FIRMWARE_FAILED, &intel->flags)) {
864 bt_dev_err(hdev, "Firmware loading failed");
869 rettime = ktime_get();
870 delta = ktime_sub(rettime, calltime);
871 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
873 bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
876 release_firmware(fw);
881 /* We need to restore the default speed before Intel reset */
883 err = intel_set_baudrate(hu, init_speed);
888 calltime = ktime_get();
890 set_bit(STATE_BOOTING, &intel->flags);
892 skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(reset_param), reset_param,
899 /* The bootloader will not indicate when the device is ready. This
900 * is done by the operational firmware sending bootup notification.
902 * Booting into operational firmware should not take longer than
903 * 1 second. However if that happens, then just fail the setup
904 * since something went wrong.
906 bt_dev_info(hdev, "Waiting for device to boot");
908 err = intel_wait_booting(hu);
912 clear_bit(STATE_BOOTING, &intel->flags);
914 rettime = ktime_get();
915 delta = ktime_sub(rettime, calltime);
916 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
918 bt_dev_info(hdev, "Device booted in %llu usecs", duration);
920 /* Enable LPM if matching pdev with wakeup enabled */
921 mutex_lock(&intel_device_list_lock);
922 list_for_each(p, &intel_device_list) {
923 struct intel_device *dev = list_entry(p, struct intel_device,
927 if (hu->tty->dev->parent == dev->pdev->dev.parent) {
928 if (device_may_wakeup(&dev->pdev->dev))
933 mutex_unlock(&intel_device_list_lock);
938 bt_dev_info(hdev, "Enabling LPM");
940 skb = __hci_cmd_sync(hdev, 0xfc8b, sizeof(lpm_param), lpm_param,
943 bt_dev_err(hdev, "Failed to enable LPM");
948 set_bit(STATE_LPM_ENABLED, &intel->flags);
951 /* Ignore errors, device can work without DDC parameters */
952 btintel_load_ddc_config(hdev, fwname);
954 skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_CMD_TIMEOUT);
960 err = intel_set_baudrate(hu, oper_speed);
965 bt_dev_info(hdev, "Setup complete");
967 clear_bit(STATE_BOOTLOADER, &intel->flags);
972 static int intel_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
974 struct hci_uart *hu = hci_get_drvdata(hdev);
975 struct intel_data *intel = hu->priv;
976 struct hci_event_hdr *hdr;
978 if (!test_bit(STATE_BOOTLOADER, &intel->flags) &&
979 !test_bit(STATE_BOOTING, &intel->flags))
982 hdr = (void *)skb->data;
984 /* When the firmware loading completes the device sends
985 * out a vendor specific event indicating the result of
986 * the firmware loading.
988 if (skb->len == 7 && hdr->evt == 0xff && hdr->plen == 0x05 &&
989 skb->data[2] == 0x06) {
990 if (skb->data[3] != 0x00)
991 set_bit(STATE_FIRMWARE_FAILED, &intel->flags);
993 if (test_and_clear_bit(STATE_DOWNLOADING, &intel->flags) &&
994 test_bit(STATE_FIRMWARE_LOADED, &intel->flags)) {
995 smp_mb__after_atomic();
996 wake_up_bit(&intel->flags, STATE_DOWNLOADING);
999 /* When switching to the operational firmware the device
1000 * sends a vendor specific event indicating that the bootup
1003 } else if (skb->len == 9 && hdr->evt == 0xff && hdr->plen == 0x07 &&
1004 skb->data[2] == 0x02) {
1005 if (test_and_clear_bit(STATE_BOOTING, &intel->flags)) {
1006 smp_mb__after_atomic();
1007 wake_up_bit(&intel->flags, STATE_BOOTING);
1011 return hci_recv_frame(hdev, skb);
1014 static void intel_recv_lpm_notify(struct hci_dev *hdev, int value)
1016 struct hci_uart *hu = hci_get_drvdata(hdev);
1017 struct intel_data *intel = hu->priv;
1019 bt_dev_dbg(hdev, "TX idle notification (%d)", value);
1022 set_bit(STATE_TX_ACTIVE, &intel->flags);
1023 schedule_work(&intel->busy_work);
1025 clear_bit(STATE_TX_ACTIVE, &intel->flags);
1029 static int intel_recv_lpm(struct hci_dev *hdev, struct sk_buff *skb)
1031 struct hci_lpm_pkt *lpm = (void *)skb->data;
1032 struct hci_uart *hu = hci_get_drvdata(hdev);
1033 struct intel_data *intel = hu->priv;
1035 switch (lpm->opcode) {
1036 case LPM_OP_TX_NOTIFY:
1037 if (lpm->dlen < 1) {
1038 bt_dev_err(hu->hdev, "Invalid LPM notification packet");
1041 intel_recv_lpm_notify(hdev, lpm->data[0]);
1043 case LPM_OP_SUSPEND_ACK:
1044 set_bit(STATE_SUSPENDED, &intel->flags);
1045 if (test_and_clear_bit(STATE_LPM_TRANSACTION, &intel->flags)) {
1046 smp_mb__after_atomic();
1047 wake_up_bit(&intel->flags, STATE_LPM_TRANSACTION);
1050 case LPM_OP_RESUME_ACK:
1051 clear_bit(STATE_SUSPENDED, &intel->flags);
1052 if (test_and_clear_bit(STATE_LPM_TRANSACTION, &intel->flags)) {
1053 smp_mb__after_atomic();
1054 wake_up_bit(&intel->flags, STATE_LPM_TRANSACTION);
1058 bt_dev_err(hdev, "Unknown LPM opcode (%02x)", lpm->opcode);
1067 #define INTEL_RECV_LPM \
1068 .type = HCI_LPM_PKT, \
1069 .hlen = HCI_LPM_HDR_SIZE, \
1072 .maxlen = HCI_LPM_MAX_SIZE
1074 static const struct h4_recv_pkt intel_recv_pkts[] = {
1075 { H4_RECV_ACL, .recv = hci_recv_frame },
1076 { H4_RECV_SCO, .recv = hci_recv_frame },
1077 { H4_RECV_EVENT, .recv = intel_recv_event },
1078 { INTEL_RECV_LPM, .recv = intel_recv_lpm },
1081 static int intel_recv(struct hci_uart *hu, const void *data, int count)
1083 struct intel_data *intel = hu->priv;
1085 if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
1088 intel->rx_skb = h4_recv_buf(hu->hdev, intel->rx_skb, data, count,
1090 ARRAY_SIZE(intel_recv_pkts));
1091 if (IS_ERR(intel->rx_skb)) {
1092 int err = PTR_ERR(intel->rx_skb);
1093 bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
1094 intel->rx_skb = NULL;
1101 static int intel_enqueue(struct hci_uart *hu, struct sk_buff *skb)
1103 struct intel_data *intel = hu->priv;
1104 struct list_head *p;
1106 BT_DBG("hu %p skb %p", hu, skb);
1111 /* Be sure our controller is resumed and potential LPM transaction
1112 * completed before enqueuing any packet.
1114 mutex_lock(&intel_device_list_lock);
1115 list_for_each(p, &intel_device_list) {
1116 struct intel_device *idev = list_entry(p, struct intel_device,
1119 if (hu->tty->dev->parent == idev->pdev->dev.parent) {
1120 pm_runtime_get_sync(&idev->pdev->dev);
1121 pm_runtime_mark_last_busy(&idev->pdev->dev);
1122 pm_runtime_put_autosuspend(&idev->pdev->dev);
1126 mutex_unlock(&intel_device_list_lock);
1128 skb_queue_tail(&intel->txq, skb);
1133 static struct sk_buff *intel_dequeue(struct hci_uart *hu)
1135 struct intel_data *intel = hu->priv;
1136 struct sk_buff *skb;
1138 skb = skb_dequeue(&intel->txq);
1142 if (test_bit(STATE_BOOTLOADER, &intel->flags) &&
1143 (bt_cb(skb)->pkt_type == HCI_COMMAND_PKT)) {
1144 struct hci_command_hdr *cmd = (void *)skb->data;
1145 __u16 opcode = le16_to_cpu(cmd->opcode);
1147 /* When the 0xfc01 command is issued to boot into
1148 * the operational firmware, it will actually not
1149 * send a command complete event. To keep the flow
1150 * control working inject that event here.
1152 if (opcode == 0xfc01)
1153 inject_cmd_complete(hu->hdev, opcode);
1156 /* Prepend skb with frame type */
1157 memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
1162 static const struct hci_uart_proto intel_proto = {
1163 .id = HCI_UART_INTEL,
1166 .init_speed = 115200,
1167 .oper_speed = 3000000,
1169 .close = intel_close,
1170 .flush = intel_flush,
1171 .setup = intel_setup,
1172 .set_baudrate = intel_set_baudrate,
1174 .enqueue = intel_enqueue,
1175 .dequeue = intel_dequeue,
1179 static const struct acpi_device_id intel_acpi_match[] = {
1183 MODULE_DEVICE_TABLE(acpi, intel_acpi_match);
1187 static int intel_suspend_device(struct device *dev)
1189 struct intel_device *idev = dev_get_drvdata(dev);
1191 mutex_lock(&idev->hu_lock);
1193 intel_lpm_suspend(idev->hu);
1194 mutex_unlock(&idev->hu_lock);
1199 static int intel_resume_device(struct device *dev)
1201 struct intel_device *idev = dev_get_drvdata(dev);
1203 mutex_lock(&idev->hu_lock);
1205 intel_lpm_resume(idev->hu);
1206 mutex_unlock(&idev->hu_lock);
1212 #ifdef CONFIG_PM_SLEEP
1213 static int intel_suspend(struct device *dev)
1215 struct intel_device *idev = dev_get_drvdata(dev);
1217 if (device_may_wakeup(dev))
1218 enable_irq_wake(idev->irq);
1220 return intel_suspend_device(dev);
1223 static int intel_resume(struct device *dev)
1225 struct intel_device *idev = dev_get_drvdata(dev);
1227 if (device_may_wakeup(dev))
1228 disable_irq_wake(idev->irq);
1230 return intel_resume_device(dev);
1234 static const struct dev_pm_ops intel_pm_ops = {
1235 SET_SYSTEM_SLEEP_PM_OPS(intel_suspend, intel_resume)
1236 SET_RUNTIME_PM_OPS(intel_suspend_device, intel_resume_device, NULL)
1239 static int intel_probe(struct platform_device *pdev)
1241 struct intel_device *idev;
1243 idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
1247 mutex_init(&idev->hu_lock);
1251 idev->reset = devm_gpiod_get(&pdev->dev, "reset", GPIOD_OUT_LOW);
1252 if (IS_ERR(idev->reset)) {
1253 dev_err(&pdev->dev, "Unable to retrieve gpio\n");
1254 return PTR_ERR(idev->reset);
1257 idev->irq = platform_get_irq(pdev, 0);
1258 if (idev->irq < 0) {
1259 struct gpio_desc *host_wake;
1261 dev_err(&pdev->dev, "No IRQ, falling back to gpio-irq\n");
1263 host_wake = devm_gpiod_get(&pdev->dev, "host-wake", GPIOD_IN);
1264 if (IS_ERR(host_wake)) {
1265 dev_err(&pdev->dev, "Unable to retrieve IRQ\n");
1269 idev->irq = gpiod_to_irq(host_wake);
1270 if (idev->irq < 0) {
1271 dev_err(&pdev->dev, "No corresponding irq for gpio\n");
1276 /* Only enable wake-up/irq when controller is powered */
1277 device_set_wakeup_capable(&pdev->dev, true);
1278 device_wakeup_disable(&pdev->dev);
1281 platform_set_drvdata(pdev, idev);
1283 /* Place this instance on the device list */
1284 mutex_lock(&intel_device_list_lock);
1285 list_add_tail(&idev->list, &intel_device_list);
1286 mutex_unlock(&intel_device_list_lock);
1288 dev_info(&pdev->dev, "registered, gpio(%d)/irq(%d).\n",
1289 desc_to_gpio(idev->reset), idev->irq);
1294 static int intel_remove(struct platform_device *pdev)
1296 struct intel_device *idev = platform_get_drvdata(pdev);
1298 device_wakeup_disable(&pdev->dev);
1300 mutex_lock(&intel_device_list_lock);
1301 list_del(&idev->list);
1302 mutex_unlock(&intel_device_list_lock);
1304 dev_info(&pdev->dev, "unregistered.\n");
1309 static struct platform_driver intel_driver = {
1310 .probe = intel_probe,
1311 .remove = intel_remove,
1313 .name = "hci_intel",
1314 .acpi_match_table = ACPI_PTR(intel_acpi_match),
1315 .pm = &intel_pm_ops,
1319 int __init intel_init(void)
1321 platform_driver_register(&intel_driver);
1323 return hci_uart_register_proto(&intel_proto);
1326 int __exit intel_deinit(void)
1328 platform_driver_unregister(&intel_driver);
1330 return hci_uart_unregister_proto(&intel_proto);