1 // SPDX-License-Identifier: GPL-2.0-only
3 * EP93XX PATA controller driver.
5 * Copyright (c) 2012, Metasoft s.c.
6 * Rafal Prylowski <prylowski@metasoft.pl>
8 * Based on pata_scc.c, pata_icside.c and on earlier version of EP93XX
9 * PATA driver by Lennert Buytenhek and Alessandro Zummo.
10 * Read/Write timings, resource management and other improvements
11 * from driver by Joao Ramos and Bartlomiej Zolnierkiewicz.
12 * DMA engine support based on spi-ep93xx.c by Mika Westerberg.
14 * Original copyrights:
16 * Support for Cirrus Logic's EP93xx (EP9312, EP9315) CPUs
17 * PATA host controller driver.
19 * Copyright (c) 2009, Bartlomiej Zolnierkiewicz
21 * Heavily based on the ep93xx-ide.c driver:
23 * Copyright (c) 2009, Joao Ramos <joao.ramos@inov.pt>
24 * INESC Inovacao (INOV)
26 * EP93XX PATA controller driver.
27 * Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
29 * An ATA driver for the Cirrus Logic EP93xx PATA controller.
31 * Based on an earlier version by Alessandro Zummo, which is:
32 * Copyright (C) 2006 Tower Technologies
35 #include <linux/err.h>
36 #include <linux/kernel.h>
37 #include <linux/module.h>
38 #include <linux/blkdev.h>
39 #include <scsi/scsi_host.h>
40 #include <linux/ata.h>
41 #include <linux/libata.h>
42 #include <linux/platform_device.h>
43 #include <linux/sys_soc.h>
44 #include <linux/delay.h>
45 #include <linux/dmaengine.h>
46 #include <linux/ktime.h>
48 #include <linux/platform_data/dma-ep93xx.h>
49 #include <linux/soc/cirrus/ep93xx.h>
51 #define DRV_NAME "ep93xx-ide"
52 #define DRV_VERSION "1.0"
55 /* IDE Control Register */
57 IDECTRL_CS0N = (1 << 0),
58 IDECTRL_CS1N = (1 << 1),
59 IDECTRL_DIORN = (1 << 5),
60 IDECTRL_DIOWN = (1 << 6),
61 IDECTRL_INTRQ = (1 << 9),
62 IDECTRL_IORDY = (1 << 10),
64 * the device IDE register to be accessed is selected through
65 * IDECTRL register's specific bitfields 'DA', 'CS1N' and 'CS0N':
68 * the values filled in this structure allows the value to be directly
69 * ORed to the IDECTRL register, hence giving directly the A[2:0] and
70 * CS1N/CS0N values for each IDE register.
71 * The values correspond to the transformation:
72 * ((real IDE address) << 2) | CS1N value << 1 | CS0N value
74 IDECTRL_ADDR_CMD = 0 + 2, /* CS1 */
75 IDECTRL_ADDR_DATA = (ATA_REG_DATA << 2) + 2,
76 IDECTRL_ADDR_ERROR = (ATA_REG_ERR << 2) + 2,
77 IDECTRL_ADDR_FEATURE = (ATA_REG_FEATURE << 2) + 2,
78 IDECTRL_ADDR_NSECT = (ATA_REG_NSECT << 2) + 2,
79 IDECTRL_ADDR_LBAL = (ATA_REG_LBAL << 2) + 2,
80 IDECTRL_ADDR_LBAM = (ATA_REG_LBAM << 2) + 2,
81 IDECTRL_ADDR_LBAH = (ATA_REG_LBAH << 2) + 2,
82 IDECTRL_ADDR_DEVICE = (ATA_REG_DEVICE << 2) + 2,
83 IDECTRL_ADDR_STATUS = (ATA_REG_STATUS << 2) + 2,
84 IDECTRL_ADDR_COMMAND = (ATA_REG_CMD << 2) + 2,
85 IDECTRL_ADDR_ALTSTATUS = (0x06 << 2) + 1, /* CS0 */
86 IDECTRL_ADDR_CTL = (0x06 << 2) + 1, /* CS0 */
88 /* IDE Configuration Register */
90 IDECFG_IDEEN = (1 << 0),
91 IDECFG_PIO = (1 << 1),
92 IDECFG_MDMA = (1 << 2),
93 IDECFG_UDMA = (1 << 3),
94 IDECFG_MODE_SHIFT = 4,
95 IDECFG_MODE_MASK = (0xf << 4),
97 IDECFG_WST_MASK = (0x3 << 8),
99 /* MDMA Operation Register */
102 /* UDMA Operation Register */
104 IDEUDMAOP_UEN = (1 << 0),
105 IDEUDMAOP_RWOP = (1 << 1),
107 /* PIO/MDMA/UDMA Data Registers */
110 IDEMDMADATAOUT = 0x18,
111 IDEMDMADATAIN = 0x1c,
112 IDEUDMADATAOUT = 0x20,
113 IDEUDMADATAIN = 0x24,
115 /* UDMA Status Register */
117 IDEUDMASTS_DMAIDE = (1 << 16),
118 IDEUDMASTS_INTIDE = (1 << 17),
119 IDEUDMASTS_SBUSY = (1 << 18),
120 IDEUDMASTS_NDO = (1 << 24),
121 IDEUDMASTS_NDI = (1 << 25),
122 IDEUDMASTS_N4X = (1 << 26),
124 /* UDMA Debug Status Register */
128 struct ep93xx_pata_data {
129 const struct platform_device *pdev;
130 void __iomem *ide_base;
134 unsigned long udma_in_phys;
135 unsigned long udma_out_phys;
137 struct dma_chan *dma_rx_channel;
138 struct ep93xx_dma_data dma_rx_data;
139 struct dma_chan *dma_tx_channel;
140 struct ep93xx_dma_data dma_tx_data;
143 static void ep93xx_pata_clear_regs(void __iomem *base)
145 writel(IDECTRL_CS0N | IDECTRL_CS1N | IDECTRL_DIORN |
146 IDECTRL_DIOWN, base + IDECTRL);
148 writel(0, base + IDECFG);
149 writel(0, base + IDEMDMAOP);
150 writel(0, base + IDEUDMAOP);
151 writel(0, base + IDEDATAOUT);
152 writel(0, base + IDEDATAIN);
153 writel(0, base + IDEMDMADATAOUT);
154 writel(0, base + IDEMDMADATAIN);
155 writel(0, base + IDEUDMADATAOUT);
156 writel(0, base + IDEUDMADATAIN);
157 writel(0, base + IDEUDMADEBUG);
160 static bool ep93xx_pata_check_iordy(void __iomem *base)
162 return !!(readl(base + IDECTRL) & IDECTRL_IORDY);
166 * According to EP93xx User's Guide, WST field of IDECFG specifies number
167 * of HCLK cycles to hold the data bus after a PIO write operation.
168 * It should be programmed to guarantee following delays:
177 * Maximum possible value for HCLK is 100MHz.
179 static int ep93xx_pata_get_wst(int pio_mode)
185 else if (pio_mode < 3)
190 return val << IDECFG_WST_SHIFT;
193 static void ep93xx_pata_enable_pio(void __iomem *base, int pio_mode)
195 writel(IDECFG_IDEEN | IDECFG_PIO |
196 ep93xx_pata_get_wst(pio_mode) |
197 (pio_mode << IDECFG_MODE_SHIFT), base + IDECFG);
201 * Based on delay loop found in mach-pxa/mp900.c.
203 * Single iteration should take 5 cpu cycles. This is 25ns assuming the
204 * fastest ep93xx cpu speed (200MHz) and is better optimized for PIO4 timings
207 static void ep93xx_pata_delay(unsigned long count)
219 static unsigned long ep93xx_pata_wait_for_iordy(void __iomem *base,
223 * According to ATA specification, IORDY pin can be first sampled
224 * tA = 35ns after activation of DIOR-/DIOW-. Maximum IORDY pulse
225 * width is tB = 1250ns.
227 * We are already t2 delay loop iterations after activation of
228 * DIOR-/DIOW-, so we set timeout to (1250 + 35) / 25 - t2 additional
229 * delay loop iterations.
231 unsigned long start = (1250 + 35) / 25 - t2;
232 unsigned long counter = start;
234 while (!ep93xx_pata_check_iordy(base) && counter--)
235 ep93xx_pata_delay(1);
236 return start - counter;
239 /* common part at start of ep93xx_pata_read/write() */
240 static void ep93xx_pata_rw_begin(void __iomem *base, unsigned long addr,
243 writel(IDECTRL_DIOWN | IDECTRL_DIORN | addr, base + IDECTRL);
244 ep93xx_pata_delay(t1);
247 /* common part at end of ep93xx_pata_read/write() */
248 static void ep93xx_pata_rw_end(void __iomem *base, unsigned long addr,
249 bool iordy, unsigned long t0, unsigned long t2,
252 ep93xx_pata_delay(t2);
253 /* lengthen t2 if needed */
255 t2 += ep93xx_pata_wait_for_iordy(base, t2);
256 writel(IDECTRL_DIOWN | IDECTRL_DIORN | addr, base + IDECTRL);
257 if (t0 > t2 && t0 - t2 > t2i)
258 ep93xx_pata_delay(t0 - t2);
260 ep93xx_pata_delay(t2i);
263 static u16 ep93xx_pata_read(struct ep93xx_pata_data *drv_data,
267 void __iomem *base = drv_data->ide_base;
268 const struct ata_timing *t = &drv_data->t;
269 unsigned long t0 = reg ? t->cyc8b : t->cycle;
270 unsigned long t2 = reg ? t->act8b : t->active;
271 unsigned long t2i = reg ? t->rec8b : t->recover;
273 ep93xx_pata_rw_begin(base, addr, t->setup);
274 writel(IDECTRL_DIOWN | addr, base + IDECTRL);
276 * The IDEDATAIN register is loaded from the DD pins at the positive
277 * edge of the DIORN signal. (EP93xx UG p27-14)
279 ep93xx_pata_rw_end(base, addr, drv_data->iordy, t0, t2, t2i);
280 return readl(base + IDEDATAIN);
283 /* IDE register read */
284 static u16 ep93xx_pata_read_reg(struct ep93xx_pata_data *drv_data,
287 return ep93xx_pata_read(drv_data, addr, true);
291 static u16 ep93xx_pata_read_data(struct ep93xx_pata_data *drv_data,
294 return ep93xx_pata_read(drv_data, addr, false);
297 static void ep93xx_pata_write(struct ep93xx_pata_data *drv_data,
298 u16 value, unsigned long addr,
301 void __iomem *base = drv_data->ide_base;
302 const struct ata_timing *t = &drv_data->t;
303 unsigned long t0 = reg ? t->cyc8b : t->cycle;
304 unsigned long t2 = reg ? t->act8b : t->active;
305 unsigned long t2i = reg ? t->rec8b : t->recover;
307 ep93xx_pata_rw_begin(base, addr, t->setup);
309 * Value from IDEDATAOUT register is driven onto the DD pins when
310 * DIOWN is low. (EP93xx UG p27-13)
312 writel(value, base + IDEDATAOUT);
313 writel(IDECTRL_DIORN | addr, base + IDECTRL);
314 ep93xx_pata_rw_end(base, addr, drv_data->iordy, t0, t2, t2i);
317 /* IDE register write */
318 static void ep93xx_pata_write_reg(struct ep93xx_pata_data *drv_data,
319 u16 value, unsigned long addr)
321 ep93xx_pata_write(drv_data, value, addr, true);
325 static void ep93xx_pata_write_data(struct ep93xx_pata_data *drv_data,
326 u16 value, unsigned long addr)
328 ep93xx_pata_write(drv_data, value, addr, false);
331 static void ep93xx_pata_set_piomode(struct ata_port *ap,
332 struct ata_device *adev)
334 struct ep93xx_pata_data *drv_data = ap->host->private_data;
335 struct ata_device *pair = ata_dev_pair(adev);
337 * Calculate timings for the delay loop, assuming ep93xx cpu speed
338 * is 200MHz (maximum possible for ep93xx). If actual cpu speed is
339 * slower, we will wait a bit longer in each delay.
340 * Additional division of cpu speed by 5, because single iteration
341 * of our delay loop takes 5 cpu cycles (25ns).
343 unsigned long T = 1000000 / (200 / 5);
345 ata_timing_compute(adev, adev->pio_mode, &drv_data->t, T, 0);
346 if (pair && pair->pio_mode) {
348 ata_timing_compute(pair, pair->pio_mode, &t, T, 0);
349 ata_timing_merge(&t, &drv_data->t, &drv_data->t,
350 ATA_TIMING_SETUP | ATA_TIMING_8BIT);
352 drv_data->iordy = ata_pio_need_iordy(adev);
354 ep93xx_pata_enable_pio(drv_data->ide_base,
355 adev->pio_mode - XFER_PIO_0);
358 /* Note: original code is ata_sff_check_status */
359 static u8 ep93xx_pata_check_status(struct ata_port *ap)
361 struct ep93xx_pata_data *drv_data = ap->host->private_data;
363 return ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_STATUS);
366 static u8 ep93xx_pata_check_altstatus(struct ata_port *ap)
368 struct ep93xx_pata_data *drv_data = ap->host->private_data;
370 return ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_ALTSTATUS);
373 /* Note: original code is ata_sff_tf_load */
374 static void ep93xx_pata_tf_load(struct ata_port *ap,
375 const struct ata_taskfile *tf)
377 struct ep93xx_pata_data *drv_data = ap->host->private_data;
378 unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
380 if (tf->ctl != ap->last_ctl) {
381 ep93xx_pata_write_reg(drv_data, tf->ctl, IDECTRL_ADDR_CTL);
382 ap->last_ctl = tf->ctl;
386 if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
387 ep93xx_pata_write_reg(drv_data, tf->hob_feature,
388 IDECTRL_ADDR_FEATURE);
389 ep93xx_pata_write_reg(drv_data, tf->hob_nsect,
391 ep93xx_pata_write_reg(drv_data, tf->hob_lbal,
393 ep93xx_pata_write_reg(drv_data, tf->hob_lbam,
395 ep93xx_pata_write_reg(drv_data, tf->hob_lbah,
400 ep93xx_pata_write_reg(drv_data, tf->feature,
401 IDECTRL_ADDR_FEATURE);
402 ep93xx_pata_write_reg(drv_data, tf->nsect, IDECTRL_ADDR_NSECT);
403 ep93xx_pata_write_reg(drv_data, tf->lbal, IDECTRL_ADDR_LBAL);
404 ep93xx_pata_write_reg(drv_data, tf->lbam, IDECTRL_ADDR_LBAM);
405 ep93xx_pata_write_reg(drv_data, tf->lbah, IDECTRL_ADDR_LBAH);
408 if (tf->flags & ATA_TFLAG_DEVICE)
409 ep93xx_pata_write_reg(drv_data, tf->device,
410 IDECTRL_ADDR_DEVICE);
415 /* Note: original code is ata_sff_tf_read */
416 static void ep93xx_pata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
418 struct ep93xx_pata_data *drv_data = ap->host->private_data;
420 tf->status = ep93xx_pata_check_status(ap);
421 tf->error = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_FEATURE);
422 tf->nsect = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_NSECT);
423 tf->lbal = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_LBAL);
424 tf->lbam = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_LBAM);
425 tf->lbah = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_LBAH);
426 tf->device = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_DEVICE);
428 if (tf->flags & ATA_TFLAG_LBA48) {
429 ep93xx_pata_write_reg(drv_data, tf->ctl | ATA_HOB,
431 tf->hob_feature = ep93xx_pata_read_reg(drv_data,
432 IDECTRL_ADDR_FEATURE);
433 tf->hob_nsect = ep93xx_pata_read_reg(drv_data,
435 tf->hob_lbal = ep93xx_pata_read_reg(drv_data,
437 tf->hob_lbam = ep93xx_pata_read_reg(drv_data,
439 tf->hob_lbah = ep93xx_pata_read_reg(drv_data,
441 ep93xx_pata_write_reg(drv_data, tf->ctl, IDECTRL_ADDR_CTL);
442 ap->last_ctl = tf->ctl;
446 /* Note: original code is ata_sff_exec_command */
447 static void ep93xx_pata_exec_command(struct ata_port *ap,
448 const struct ata_taskfile *tf)
450 struct ep93xx_pata_data *drv_data = ap->host->private_data;
452 ep93xx_pata_write_reg(drv_data, tf->command,
453 IDECTRL_ADDR_COMMAND);
457 /* Note: original code is ata_sff_dev_select */
458 static void ep93xx_pata_dev_select(struct ata_port *ap, unsigned int device)
460 struct ep93xx_pata_data *drv_data = ap->host->private_data;
461 u8 tmp = ATA_DEVICE_OBS;
466 ep93xx_pata_write_reg(drv_data, tmp, IDECTRL_ADDR_DEVICE);
467 ata_sff_pause(ap); /* needed; also flushes, for mmio */
470 /* Note: original code is ata_sff_set_devctl */
471 static void ep93xx_pata_set_devctl(struct ata_port *ap, u8 ctl)
473 struct ep93xx_pata_data *drv_data = ap->host->private_data;
475 ep93xx_pata_write_reg(drv_data, ctl, IDECTRL_ADDR_CTL);
478 /* Note: original code is ata_sff_data_xfer */
479 static unsigned int ep93xx_pata_data_xfer(struct ata_queued_cmd *qc,
481 unsigned int buflen, int rw)
483 struct ata_port *ap = qc->dev->link->ap;
484 struct ep93xx_pata_data *drv_data = ap->host->private_data;
485 u16 *data = (u16 *)buf;
486 unsigned int words = buflen >> 1;
488 /* Transfer multiple of 2 bytes */
491 *data++ = cpu_to_le16(
492 ep93xx_pata_read_data(
493 drv_data, IDECTRL_ADDR_DATA));
495 ep93xx_pata_write_data(drv_data, le16_to_cpu(*data++),
498 /* Transfer trailing 1 byte, if any. */
499 if (unlikely(buflen & 0x01)) {
500 unsigned char pad[2] = { };
506 ep93xx_pata_read_data(
507 drv_data, IDECTRL_ADDR_DATA));
511 ep93xx_pata_write_data(drv_data, le16_to_cpu(*pad),
520 /* Note: original code is ata_devchk */
521 static bool ep93xx_pata_device_is_present(struct ata_port *ap,
524 struct ep93xx_pata_data *drv_data = ap->host->private_data;
527 ap->ops->sff_dev_select(ap, device);
529 ep93xx_pata_write_reg(drv_data, 0x55, IDECTRL_ADDR_NSECT);
530 ep93xx_pata_write_reg(drv_data, 0xaa, IDECTRL_ADDR_LBAL);
532 ep93xx_pata_write_reg(drv_data, 0xaa, IDECTRL_ADDR_NSECT);
533 ep93xx_pata_write_reg(drv_data, 0x55, IDECTRL_ADDR_LBAL);
535 ep93xx_pata_write_reg(drv_data, 0x55, IDECTRL_ADDR_NSECT);
536 ep93xx_pata_write_reg(drv_data, 0xaa, IDECTRL_ADDR_LBAL);
538 nsect = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_NSECT);
539 lbal = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_LBAL);
541 if ((nsect == 0x55) && (lbal == 0xaa))
547 /* Note: original code is ata_sff_wait_after_reset */
548 static int ep93xx_pata_wait_after_reset(struct ata_link *link,
549 unsigned int devmask,
550 unsigned long deadline)
552 struct ata_port *ap = link->ap;
553 struct ep93xx_pata_data *drv_data = ap->host->private_data;
554 unsigned int dev0 = devmask & (1 << 0);
555 unsigned int dev1 = devmask & (1 << 1);
558 ata_msleep(ap, ATA_WAIT_AFTER_RESET);
560 /* always check readiness of the master device */
561 rc = ata_sff_wait_ready(link, deadline);
563 * -ENODEV means the odd clown forgot the D7 pulldown resistor
564 * and TF status is 0xff, bail out on it too.
570 * if device 1 was found in ata_devchk, wait for register
571 * access briefly, then wait for BSY to clear.
576 ap->ops->sff_dev_select(ap, 1);
579 * Wait for register access. Some ATAPI devices fail
580 * to set nsect/lbal after reset, so don't waste too
581 * much time on it. We're gonna wait for !BSY anyway.
583 for (i = 0; i < 2; i++) {
586 nsect = ep93xx_pata_read_reg(drv_data,
588 lbal = ep93xx_pata_read_reg(drv_data,
590 if (nsect == 1 && lbal == 1)
592 msleep(50); /* give drive a breather */
595 rc = ata_sff_wait_ready(link, deadline);
602 /* is all this really necessary? */
603 ap->ops->sff_dev_select(ap, 0);
605 ap->ops->sff_dev_select(ap, 1);
607 ap->ops->sff_dev_select(ap, 0);
612 /* Note: original code is ata_bus_softreset */
613 static int ep93xx_pata_bus_softreset(struct ata_port *ap, unsigned int devmask,
614 unsigned long deadline)
616 struct ep93xx_pata_data *drv_data = ap->host->private_data;
618 ep93xx_pata_write_reg(drv_data, ap->ctl, IDECTRL_ADDR_CTL);
619 udelay(20); /* FIXME: flush */
620 ep93xx_pata_write_reg(drv_data, ap->ctl | ATA_SRST, IDECTRL_ADDR_CTL);
621 udelay(20); /* FIXME: flush */
622 ep93xx_pata_write_reg(drv_data, ap->ctl, IDECTRL_ADDR_CTL);
623 ap->last_ctl = ap->ctl;
625 return ep93xx_pata_wait_after_reset(&ap->link, devmask, deadline);
628 static void ep93xx_pata_release_dma(struct ep93xx_pata_data *drv_data)
630 if (drv_data->dma_rx_channel) {
631 dma_release_channel(drv_data->dma_rx_channel);
632 drv_data->dma_rx_channel = NULL;
634 if (drv_data->dma_tx_channel) {
635 dma_release_channel(drv_data->dma_tx_channel);
636 drv_data->dma_tx_channel = NULL;
640 static bool ep93xx_pata_dma_filter(struct dma_chan *chan, void *filter_param)
642 if (ep93xx_dma_chan_is_m2p(chan))
645 chan->private = filter_param;
649 static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
651 const struct platform_device *pdev = drv_data->pdev;
653 struct dma_slave_config conf;
656 dma_cap_set(DMA_SLAVE, mask);
659 * Request two channels for IDE. Another possibility would be
660 * to request only one channel, and reprogram it's direction at
661 * start of new transfer.
663 drv_data->dma_rx_data.port = EP93XX_DMA_IDE;
664 drv_data->dma_rx_data.direction = DMA_DEV_TO_MEM;
665 drv_data->dma_rx_data.name = "ep93xx-pata-rx";
666 drv_data->dma_rx_channel = dma_request_channel(mask,
667 ep93xx_pata_dma_filter, &drv_data->dma_rx_data);
668 if (!drv_data->dma_rx_channel)
671 drv_data->dma_tx_data.port = EP93XX_DMA_IDE;
672 drv_data->dma_tx_data.direction = DMA_MEM_TO_DEV;
673 drv_data->dma_tx_data.name = "ep93xx-pata-tx";
674 drv_data->dma_tx_channel = dma_request_channel(mask,
675 ep93xx_pata_dma_filter, &drv_data->dma_tx_data);
676 if (!drv_data->dma_tx_channel) {
677 dma_release_channel(drv_data->dma_rx_channel);
681 /* Configure receive channel direction and source address */
682 memset(&conf, 0, sizeof(conf));
683 conf.direction = DMA_DEV_TO_MEM;
684 conf.src_addr = drv_data->udma_in_phys;
685 conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
686 if (dmaengine_slave_config(drv_data->dma_rx_channel, &conf)) {
687 dev_err(&pdev->dev, "failed to configure rx dma channel\n");
688 ep93xx_pata_release_dma(drv_data);
692 /* Configure transmit channel direction and destination address */
693 memset(&conf, 0, sizeof(conf));
694 conf.direction = DMA_MEM_TO_DEV;
695 conf.dst_addr = drv_data->udma_out_phys;
696 conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
697 if (dmaengine_slave_config(drv_data->dma_tx_channel, &conf)) {
698 dev_err(&pdev->dev, "failed to configure tx dma channel\n");
699 ep93xx_pata_release_dma(drv_data);
703 static void ep93xx_pata_dma_start(struct ata_queued_cmd *qc)
705 struct dma_async_tx_descriptor *txd;
706 struct ep93xx_pata_data *drv_data = qc->ap->host->private_data;
707 void __iomem *base = drv_data->ide_base;
708 struct ata_device *adev = qc->dev;
709 u32 v = qc->dma_dir == DMA_TO_DEVICE ? IDEUDMAOP_RWOP : 0;
710 struct dma_chan *channel = qc->dma_dir == DMA_TO_DEVICE
711 ? drv_data->dma_tx_channel : drv_data->dma_rx_channel;
713 txd = dmaengine_prep_slave_sg(channel, qc->sg, qc->n_elem, qc->dma_dir,
716 dev_err(qc->ap->dev, "failed to prepare slave for sg dma\n");
719 txd->callback = NULL;
720 txd->callback_param = NULL;
722 if (dmaengine_submit(txd) < 0) {
723 dev_err(qc->ap->dev, "failed to submit dma transfer\n");
726 dma_async_issue_pending(channel);
729 * When enabling UDMA operation, IDEUDMAOP register needs to be
730 * programmed in three step sequence:
731 * 1) set or clear the RWOP bit,
732 * 2) perform dummy read of the register,
733 * 3) set the UEN bit.
735 writel(v, base + IDEUDMAOP);
736 readl(base + IDEUDMAOP);
737 writel(v | IDEUDMAOP_UEN, base + IDEUDMAOP);
739 writel(IDECFG_IDEEN | IDECFG_UDMA |
740 ((adev->xfer_mode - XFER_UDMA_0) << IDECFG_MODE_SHIFT),
744 static void ep93xx_pata_dma_stop(struct ata_queued_cmd *qc)
746 struct ep93xx_pata_data *drv_data = qc->ap->host->private_data;
747 void __iomem *base = drv_data->ide_base;
749 /* terminate all dma transfers, if not yet finished */
750 dmaengine_terminate_all(drv_data->dma_rx_channel);
751 dmaengine_terminate_all(drv_data->dma_tx_channel);
754 * To properly stop IDE-DMA, IDEUDMAOP register must to be cleared
755 * and IDECTRL register must be set to default value.
757 writel(0, base + IDEUDMAOP);
758 writel(readl(base + IDECTRL) | IDECTRL_DIOWN | IDECTRL_DIORN |
759 IDECTRL_CS0N | IDECTRL_CS1N, base + IDECTRL);
761 ep93xx_pata_enable_pio(drv_data->ide_base,
762 qc->dev->pio_mode - XFER_PIO_0);
764 ata_sff_dma_pause(qc->ap);
767 static void ep93xx_pata_dma_setup(struct ata_queued_cmd *qc)
769 qc->ap->ops->sff_exec_command(qc->ap, &qc->tf);
772 static u8 ep93xx_pata_dma_status(struct ata_port *ap)
774 struct ep93xx_pata_data *drv_data = ap->host->private_data;
775 u32 val = readl(drv_data->ide_base + IDEUDMASTS);
778 * UDMA Status Register bits:
780 * DMAIDE - DMA request signal from UDMA state machine,
781 * INTIDE - INT line generated by UDMA because of errors in the
783 * SBUSY - UDMA state machine busy, not in idle state,
784 * NDO - error for data-out not completed,
785 * NDI - error for data-in not completed,
786 * N4X - error for data transferred not multiplies of four
790 if (val & IDEUDMASTS_NDO || val & IDEUDMASTS_NDI ||
791 val & IDEUDMASTS_N4X || val & IDEUDMASTS_INTIDE)
794 /* read INTRQ (INT[3]) pin input state */
795 if (readl(drv_data->ide_base + IDECTRL) & IDECTRL_INTRQ)
798 if (val & IDEUDMASTS_SBUSY || val & IDEUDMASTS_DMAIDE)
799 return ATA_DMA_ACTIVE;
804 /* Note: original code is ata_sff_softreset */
805 static int ep93xx_pata_softreset(struct ata_link *al, unsigned int *classes,
806 unsigned long deadline)
808 struct ata_port *ap = al->ap;
809 unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
810 unsigned int devmask = 0;
814 /* determine if device 0/1 are present */
815 if (ep93xx_pata_device_is_present(ap, 0))
817 if (slave_possible && ep93xx_pata_device_is_present(ap, 1))
820 /* select device 0 again */
821 ap->ops->sff_dev_select(al->ap, 0);
823 /* issue bus reset */
824 rc = ep93xx_pata_bus_softreset(ap, devmask, deadline);
825 /* if link is ocuppied, -ENODEV too is an error */
826 if (rc && (rc != -ENODEV || sata_scr_valid(al))) {
827 ata_link_err(al, "SRST failed (errno=%d)\n", rc);
831 /* determine by signature whether we have ATA or ATAPI devices */
832 classes[0] = ata_sff_dev_classify(&al->device[0], devmask & (1 << 0),
834 if (slave_possible && err != 0x81)
835 classes[1] = ata_sff_dev_classify(&al->device[1],
836 devmask & (1 << 1), &err);
841 /* Note: original code is ata_sff_drain_fifo */
842 static void ep93xx_pata_drain_fifo(struct ata_queued_cmd *qc)
846 struct ep93xx_pata_data *drv_data;
848 /* We only need to flush incoming data when a command was running */
849 if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE)
853 drv_data = ap->host->private_data;
854 /* Drain up to 64K of data before we give up this recovery method */
855 for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ)
856 && count < 65536; count += 2)
857 ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_DATA);
860 ata_port_dbg(ap, "drained %d bytes to clear DRQ.\n", count);
864 static int ep93xx_pata_port_start(struct ata_port *ap)
866 struct ep93xx_pata_data *drv_data = ap->host->private_data;
869 * Set timings to safe values at startup (= number of ns from ATA
870 * specification), we'll switch to properly calculated values later.
872 drv_data->t = *ata_timing_find_mode(XFER_PIO_0);
876 static const struct scsi_host_template ep93xx_pata_sht = {
877 ATA_BASE_SHT(DRV_NAME),
878 /* ep93xx dma implementation limit */
880 /* ep93xx dma can't transfer 65536 bytes at once */
881 .dma_boundary = 0x7fff,
884 static struct ata_port_operations ep93xx_pata_port_ops = {
885 .inherits = &ata_bmdma_port_ops,
887 .qc_prep = ata_noop_qc_prep,
889 .softreset = ep93xx_pata_softreset,
890 .hardreset = ATA_OP_NULL,
892 .sff_dev_select = ep93xx_pata_dev_select,
893 .sff_set_devctl = ep93xx_pata_set_devctl,
894 .sff_check_status = ep93xx_pata_check_status,
895 .sff_check_altstatus = ep93xx_pata_check_altstatus,
896 .sff_tf_load = ep93xx_pata_tf_load,
897 .sff_tf_read = ep93xx_pata_tf_read,
898 .sff_exec_command = ep93xx_pata_exec_command,
899 .sff_data_xfer = ep93xx_pata_data_xfer,
900 .sff_drain_fifo = ep93xx_pata_drain_fifo,
901 .sff_irq_clear = ATA_OP_NULL,
903 .set_piomode = ep93xx_pata_set_piomode,
905 .bmdma_setup = ep93xx_pata_dma_setup,
906 .bmdma_start = ep93xx_pata_dma_start,
907 .bmdma_stop = ep93xx_pata_dma_stop,
908 .bmdma_status = ep93xx_pata_dma_status,
910 .cable_detect = ata_cable_unknown,
911 .port_start = ep93xx_pata_port_start,
914 static const struct soc_device_attribute ep93xx_soc_table[] = {
915 { .revision = "E1", .data = (void *)ATA_UDMA3 },
916 { .revision = "E2", .data = (void *)ATA_UDMA4 },
920 static int ep93xx_pata_probe(struct platform_device *pdev)
922 struct ep93xx_pata_data *drv_data;
923 struct ata_host *host;
926 struct resource *mem_res;
927 void __iomem *ide_base;
930 err = ep93xx_ide_acquire_gpio(pdev);
934 /* INT[3] (IRQ_EP93XX_EXT3) line connected as pull down */
935 irq = platform_get_irq(pdev, 0);
941 ide_base = devm_platform_get_and_ioremap_resource(pdev, 0, &mem_res);
942 if (IS_ERR(ide_base)) {
943 err = PTR_ERR(ide_base);
947 drv_data = devm_kzalloc(&pdev->dev, sizeof(*drv_data), GFP_KERNEL);
953 drv_data->pdev = pdev;
954 drv_data->ide_base = ide_base;
955 drv_data->udma_in_phys = mem_res->start + IDEUDMADATAIN;
956 drv_data->udma_out_phys = mem_res->start + IDEUDMADATAOUT;
957 ep93xx_pata_dma_init(drv_data);
960 host = ata_host_alloc(&pdev->dev, 1);
966 ep93xx_pata_clear_regs(ide_base);
968 host->private_data = drv_data;
971 ap->dev = &pdev->dev;
972 ap->ops = &ep93xx_pata_port_ops;
973 ap->flags |= ATA_FLAG_SLAVE_POSS;
974 ap->pio_mask = ATA_PIO4;
977 * Maximum UDMA modes:
978 * EP931x rev.E0 - UDMA2
979 * EP931x rev.E1 - UDMA3
980 * EP931x rev.E2 - UDMA4
982 * MWDMA support was removed from EP931x rev.E2,
983 * so this driver supports only UDMA modes.
985 if (drv_data->dma_rx_channel && drv_data->dma_tx_channel) {
986 const struct soc_device_attribute *match;
988 match = soc_device_match(ep93xx_soc_table);
990 ap->udma_mask = (unsigned int) match->data;
992 ap->udma_mask = ATA_UDMA2;
995 /* defaults, pio 0 */
996 ep93xx_pata_enable_pio(ide_base, 0);
998 dev_info(&pdev->dev, "version " DRV_VERSION "\n");
1001 err = ata_host_activate(host, irq, ata_bmdma_interrupt, 0,
1007 ep93xx_pata_release_dma(drv_data);
1009 ep93xx_ide_release_gpio(pdev);
1013 static void ep93xx_pata_remove(struct platform_device *pdev)
1015 struct ata_host *host = platform_get_drvdata(pdev);
1016 struct ep93xx_pata_data *drv_data = host->private_data;
1018 ata_host_detach(host);
1019 ep93xx_pata_release_dma(drv_data);
1020 ep93xx_pata_clear_regs(drv_data->ide_base);
1021 ep93xx_ide_release_gpio(pdev);
1024 static struct platform_driver ep93xx_pata_platform_driver = {
1028 .probe = ep93xx_pata_probe,
1029 .remove_new = ep93xx_pata_remove,
1032 module_platform_driver(ep93xx_pata_platform_driver);
1034 MODULE_AUTHOR("Alessandro Zummo, Lennert Buytenhek, Joao Ramos, "
1035 "Bartlomiej Zolnierkiewicz, Rafal Prylowski");
1036 MODULE_DESCRIPTION("low-level driver for cirrus ep93xx IDE controller");
1037 MODULE_LICENSE("GPL");
1038 MODULE_VERSION(DRV_VERSION);
1039 MODULE_ALIAS("platform:pata_ep93xx");