GNU Linux-libre 6.7.9-gnu
[releases.git] / drivers / ata / pata_buddha.c
1 // SPDX-License-Identifier: GPL-2.0
2
3 /*
4  * Buddha, Catweasel and X-Surf PATA controller driver
5  *
6  * Copyright (c) 2018 Samsung Electronics Co., Ltd.
7  *              http://www.samsung.com
8  *
9  * Based on buddha.c:
10  *
11  *      Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
12  */
13
14 #include <linux/ata.h>
15 #include <linux/blkdev.h>
16 #include <linux/delay.h>
17 #include <linux/interrupt.h>
18 #include <linux/kernel.h>
19 #include <linux/libata.h>
20 #include <linux/mm.h>
21 #include <linux/mod_devicetable.h>
22 #include <linux/module.h>
23 #include <linux/types.h>
24 #include <linux/zorro.h>
25 #include <scsi/scsi_cmnd.h>
26 #include <scsi/scsi_host.h>
27
28 #include <asm/amigahw.h>
29 #include <asm/amigaints.h>
30 #include <asm/setup.h>
31
32 #define DRV_NAME "pata_buddha"
33 #define DRV_VERSION "0.1.1"
34
35 #define BUDDHA_BASE1    0x800
36 #define BUDDHA_BASE2    0xa00
37 #define BUDDHA_BASE3    0xc00
38 #define XSURF_BASE1     0xb000 /* 2.5" interface */
39 #define XSURF_BASE2     0xd000 /* 3.5" interface */
40 #define BUDDHA_CONTROL  0x11a
41 #define BUDDHA_IRQ      0xf00
42 #define XSURF_IRQ       0x7e
43 #define BUDDHA_IRQ_MR   0xfc0   /* master interrupt enable */
44
45 enum {
46         BOARD_BUDDHA = 0,
47         BOARD_CATWEASEL,
48         BOARD_XSURF
49 };
50
51 static unsigned int buddha_bases[3] = {
52         BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
53 };
54
55 static unsigned int xsurf_bases[2] = {
56         XSURF_BASE1, XSURF_BASE2
57 };
58
59 static const struct scsi_host_template pata_buddha_sht = {
60         ATA_PIO_SHT(DRV_NAME),
61 };
62
63 /* FIXME: is this needed? */
64 static unsigned int pata_buddha_data_xfer(struct ata_queued_cmd *qc,
65                                          unsigned char *buf,
66                                          unsigned int buflen, int rw)
67 {
68         struct ata_device *dev = qc->dev;
69         struct ata_port *ap = dev->link->ap;
70         void __iomem *data_addr = ap->ioaddr.data_addr;
71         unsigned int words = buflen >> 1;
72
73         /* Transfer multiple of 2 bytes */
74         if (rw == READ)
75                 raw_insw((u16 *)data_addr, (u16 *)buf, words);
76         else
77                 raw_outsw((u16 *)data_addr, (u16 *)buf, words);
78
79         /* Transfer trailing byte, if any. */
80         if (unlikely(buflen & 0x01)) {
81                 unsigned char pad[2] = { };
82
83                 /* Point buf to the tail of buffer */
84                 buf += buflen - 1;
85
86                 if (rw == READ) {
87                         raw_insw((u16 *)data_addr, (u16 *)pad, 1);
88                         *buf = pad[0];
89                 } else {
90                         pad[0] = *buf;
91                         raw_outsw((u16 *)data_addr, (u16 *)pad, 1);
92                 }
93                 words++;
94         }
95
96         return words << 1;
97 }
98
99 /*
100  * Provide our own set_mode() as we don't want to change anything that has
101  * already been configured..
102  */
103 static int pata_buddha_set_mode(struct ata_link *link,
104                                 struct ata_device **unused)
105 {
106         struct ata_device *dev;
107
108         ata_for_each_dev(dev, link, ENABLED) {
109                 /* We don't really care */
110                 dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
111                 dev->xfer_shift = ATA_SHIFT_PIO;
112                 dev->flags |= ATA_DFLAG_PIO;
113                 ata_dev_info(dev, "configured for PIO\n");
114         }
115         return 0;
116 }
117
118 static bool pata_buddha_irq_check(struct ata_port *ap)
119 {
120         u8 ch;
121
122         ch = z_readb((unsigned long)ap->private_data);
123
124         return !!(ch & 0x80);
125 }
126
127 static void pata_xsurf_irq_clear(struct ata_port *ap)
128 {
129         z_writeb(0, (unsigned long)ap->private_data);
130 }
131
132 static struct ata_port_operations pata_buddha_ops = {
133         .inherits       = &ata_sff_port_ops,
134         .sff_data_xfer  = pata_buddha_data_xfer,
135         .sff_irq_check  = pata_buddha_irq_check,
136         .cable_detect   = ata_cable_unknown,
137         .set_mode       = pata_buddha_set_mode,
138 };
139
140 static struct ata_port_operations pata_xsurf_ops = {
141         .inherits       = &ata_sff_port_ops,
142         .sff_data_xfer  = pata_buddha_data_xfer,
143         .sff_irq_check  = pata_buddha_irq_check,
144         .sff_irq_clear  = pata_xsurf_irq_clear,
145         .cable_detect   = ata_cable_unknown,
146         .set_mode       = pata_buddha_set_mode,
147 };
148
149 static int pata_buddha_probe(struct zorro_dev *z,
150                              const struct zorro_device_id *ent)
151 {
152         static const char * const board_name[] = {
153                 "Buddha", "Catweasel", "X-Surf"
154         };
155         struct ata_host *host;
156         void __iomem *buddha_board;
157         unsigned long board;
158         unsigned int type = ent->driver_data;
159         unsigned int nr_ports = (type == BOARD_CATWEASEL) ? 3 : 2;
160         void *old_drvdata;
161         int i;
162
163         dev_info(&z->dev, "%s IDE controller\n", board_name[type]);
164
165         board = z->resource.start;
166
167         if (type != BOARD_XSURF) {
168                 if (!devm_request_mem_region(&z->dev,
169                                              board + BUDDHA_BASE1,
170                                              0x800, DRV_NAME))
171                         return -ENXIO;
172         } else {
173                 if (!devm_request_mem_region(&z->dev,
174                                              board + XSURF_BASE1,
175                                              0x1000, DRV_NAME))
176                         return -ENXIO;
177                 if (!devm_request_mem_region(&z->dev,
178                                              board + XSURF_BASE2,
179                                              0x1000, DRV_NAME)) {
180                 }
181         }
182
183         /* Workaround for X-Surf: Save drvdata in case zorro8390 has set it */
184         if (type == BOARD_XSURF)
185                 old_drvdata = dev_get_drvdata(&z->dev);
186
187         /* allocate host */
188         host = ata_host_alloc(&z->dev, nr_ports);
189         if (type == BOARD_XSURF)
190                 dev_set_drvdata(&z->dev, old_drvdata);
191         if (!host)
192                 return -ENXIO;
193
194         buddha_board = ZTWO_VADDR(board);
195
196         /* enable the board IRQ on Buddha/Catweasel */
197         if (type != BOARD_XSURF)
198                 z_writeb(0, buddha_board + BUDDHA_IRQ_MR);
199
200         for (i = 0; i < nr_ports; i++) {
201                 struct ata_port *ap = host->ports[i];
202                 void __iomem *base, *irqport;
203                 unsigned long ctl = 0;
204
205                 if (type != BOARD_XSURF) {
206                         ap->ops = &pata_buddha_ops;
207                         base = buddha_board + buddha_bases[i];
208                         ctl = BUDDHA_CONTROL;
209                         irqport = buddha_board + BUDDHA_IRQ + i * 0x40;
210                 } else {
211                         ap->ops = &pata_xsurf_ops;
212                         base = buddha_board + xsurf_bases[i];
213                         /* X-Surf has no CS1* (Control/AltStat) */
214                         irqport = buddha_board + XSURF_IRQ;
215                 }
216
217                 ap->pio_mask = ATA_PIO4;
218                 ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
219
220                 ap->ioaddr.data_addr            = base;
221                 ap->ioaddr.error_addr           = base + 2 + 1 * 4;
222                 ap->ioaddr.feature_addr         = base + 2 + 1 * 4;
223                 ap->ioaddr.nsect_addr           = base + 2 + 2 * 4;
224                 ap->ioaddr.lbal_addr            = base + 2 + 3 * 4;
225                 ap->ioaddr.lbam_addr            = base + 2 + 4 * 4;
226                 ap->ioaddr.lbah_addr            = base + 2 + 5 * 4;
227                 ap->ioaddr.device_addr          = base + 2 + 6 * 4;
228                 ap->ioaddr.status_addr          = base + 2 + 7 * 4;
229                 ap->ioaddr.command_addr         = base + 2 + 7 * 4;
230
231                 if (ctl) {
232                         ap->ioaddr.altstatus_addr = base + ctl;
233                         ap->ioaddr.ctl_addr       = base + ctl;
234                 }
235
236                 ap->private_data = (void *)irqport;
237
238                 ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", board,
239                               ctl ? board + buddha_bases[i] + ctl : 0);
240         }
241
242         ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt,
243                           IRQF_SHARED, &pata_buddha_sht);
244
245         return 0;
246 }
247
248 static void pata_buddha_remove(struct zorro_dev *z)
249 {
250         struct ata_host *host = dev_get_drvdata(&z->dev);
251
252         ata_host_detach(host);
253 }
254
255 static const struct zorro_device_id pata_buddha_zorro_tbl[] = {
256         { ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA, BOARD_BUDDHA},
257         { ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL, BOARD_CATWEASEL},
258         { 0 }
259 };
260 MODULE_DEVICE_TABLE(zorro, pata_buddha_zorro_tbl);
261
262 static struct zorro_driver pata_buddha_driver = {
263         .name           = "pata_buddha",
264         .id_table       = pata_buddha_zorro_tbl,
265         .probe          = pata_buddha_probe,
266         .remove         = pata_buddha_remove,
267 };
268
269 /*
270  * We cannot have a modalias for X-Surf boards, as it competes with the
271  * zorro8390 network driver. As a stopgap measure until we have proper
272  * MFD support for this board, we manually attach to it late after Zorro
273  * has enumerated its boards.
274  */
275 static int __init pata_buddha_late_init(void)
276 {
277         struct zorro_dev *z = NULL;
278
279         /* Auto-bind to regular boards */
280         zorro_register_driver(&pata_buddha_driver);
281
282         /* Manually bind to all X-Surf boards */
283         while ((z = zorro_find_device(ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, z))) {
284                 static struct zorro_device_id xsurf_ent = {
285                         ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, BOARD_XSURF
286                 };
287
288                 pata_buddha_probe(z, &xsurf_ent);
289         }
290
291         return 0;
292 }
293 late_initcall(pata_buddha_late_init);
294
295 MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
296 MODULE_DESCRIPTION("low-level driver for Buddha/Catweasel/X-Surf PATA");
297 MODULE_LICENSE("GPL v2");
298 MODULE_VERSION(DRV_VERSION);