drivers/acpi/processor_idle.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * processor_idle - idle state submodule to the ACPI processor driver
   4  *
   5  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
   6  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
   7  *  Copyright (C) 2004, 2005 Dominik Brodowski <linux@brodo.de>
   8  *  Copyright (C) 2004  Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
   9  *                      - Added processor hotplug support
  10  *  Copyright (C) 2005  Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
  11  *                      - Added support for C3 on SMP
  12  */
  13 #define pr_fmt(fmt) "ACPI: " fmt
  14
  15 #include <linux/module.h>
  16 #include <linux/acpi.h>
  17 #include <linux/dmi.h>
  18 #include <linux/sched.h>       /* need_resched() */
  19 #include <linux/sort.h>
  20 #include <linux/tick.h>
  21 #include <linux/cpuidle.h>
  22 #include <linux/cpu.h>
  23 #include <linux/minmax.h>
  24 #include <linux/perf_event.h>
  25 #include <acpi/processor.h>
  26
  27 /*
  28  * Include the apic definitions for x86 to have the APIC timer related defines
  29  * available also for UP (on SMP it gets magically included via linux/smp.h).
  30  * asm/acpi.h is not an option, as it would require more include magic. Also
  31  * creating an empty asm-ia64/apic.h would just trade pest vs. cholera.
  32  */
  33 #ifdef CONFIG_X86
  34 #include <asm/apic.h>
  35 #include <asm/cpu.h>
  36 #endif
  37
  38 #define ACPI_IDLE_STATE_START   (IS_ENABLED(CONFIG_ARCH_HAS_CPU_RELAX) ? 1 : 0)
  39
  40 static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
  41 module_param(max_cstate, uint, 0400);
  42 static bool nocst __read_mostly;
  43 module_param(nocst, bool, 0400);
  44 static bool bm_check_disable __read_mostly;
  45 module_param(bm_check_disable, bool, 0400);
  46
  47 static unsigned int latency_factor __read_mostly = 2;
  48 module_param(latency_factor, uint, 0644);
  49
  50 static DEFINE_PER_CPU(struct cpuidle_device *, acpi_cpuidle_device);
  51
  52 struct cpuidle_driver acpi_idle_driver = {
  53         .name =         "acpi_idle",
  54         .owner =        THIS_MODULE,
  55 };
  56
  57 #ifdef CONFIG_ACPI_PROCESSOR_CSTATE
  58 static
  59 DEFINE_PER_CPU(struct acpi_processor_cx * [CPUIDLE_STATE_MAX], acpi_cstate);
  60
  61 static int disabled_by_idle_boot_param(void)
  62 {
  63         return boot_option_idle_override == IDLE_POLL ||
  64                 boot_option_idle_override == IDLE_HALT;
  65 }
  66
  67 /*
  68  * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
  69  * For now disable this. Probably a bug somewhere else.
  70  *
  71  * To skip this limit, boot/load with a large max_cstate limit.
  72  */
  73 static int set_max_cstate(const struct dmi_system_id *id)
  74 {
  75         if (max_cstate > ACPI_PROCESSOR_MAX_POWER)
  76                 return 0;
  77
  78         pr_notice("%s detected - limiting to C%ld max_cstate."
  79                   " Override with \"processor.max_cstate=%d\"\n", id->ident,
  80                   (long)id->driver_data, ACPI_PROCESSOR_MAX_POWER + 1);
  81
  82         max_cstate = (long)id->driver_data;
  83
  84         return 0;
  85 }
  86
  87 static const struct dmi_system_id processor_power_dmi_table[] = {
  88         { set_max_cstate, "Clevo 5600D", {
  89           DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
  90           DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307")},
  91          (void *)2},
  92         { set_max_cstate, "Pavilion zv5000", {
  93           DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
  94           DMI_MATCH(DMI_PRODUCT_NAME,"Pavilion zv5000 (DS502A#ABA)")},
  95          (void *)1},
  96         { set_max_cstate, "Asus L8400B", {
  97           DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
  98           DMI_MATCH(DMI_PRODUCT_NAME,"L8400B series Notebook PC")},
  99          (void *)1},
 100         {},
 101 };
 102
 103
 104 /*
 105  * Callers should disable interrupts before the call and enable
 106  * interrupts after return.
 107  */
 108 static void __cpuidle acpi_safe_halt(void)
 109 {
 110         if (!tif_need_resched()) {
 111                 safe_halt();
 112                 local_irq_disable();
 113         }
 114 }
 115
 116 #ifdef ARCH_APICTIMER_STOPS_ON_C3
 117
 118 /*
 119  * Some BIOS implementations switch to C3 in the published C2 state.
 120  * This seems to be a common problem on AMD boxen, but other vendors
 121  * are affected too. We pick the most conservative approach: we assume
 122  * that the local APIC stops in both C2 and C3.
 123  */
 124 static void lapic_timer_check_state(int state, struct acpi_processor *pr,
 125                                    struct acpi_processor_cx *cx)
 126 {
 127         struct acpi_processor_power *pwr = &pr->power;
 128         u8 type = local_apic_timer_c2_ok ? ACPI_STATE_C3 : ACPI_STATE_C2;
 129
 130         if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT))
 131                 return;
 132
 133         if (boot_cpu_has_bug(X86_BUG_AMD_APIC_C1E))
 134                 type = ACPI_STATE_C1;
 135
 136         /*
 137          * Check, if one of the previous states already marked the lapic
 138          * unstable
 139          */
 140         if (pwr->timer_broadcast_on_state < state)
 141                 return;
 142
 143         if (cx->type >= type)
 144                 pr->power.timer_broadcast_on_state = state;
 145 }
 146
 147 static void __lapic_timer_propagate_broadcast(void *arg)
 148 {
 149         struct acpi_processor *pr = (struct acpi_processor *) arg;
 150
 151         if (pr->power.timer_broadcast_on_state < INT_MAX)
 152                 tick_broadcast_enable();
 153         else
 154                 tick_broadcast_disable();
 155 }
 156
 157 static void lapic_timer_propagate_broadcast(struct acpi_processor *pr)
 158 {
 159         smp_call_function_single(pr->id, __lapic_timer_propagate_broadcast,
 160                                  (void *)pr, 1);
 161 }
 162
 163 /* Power(C) State timer broadcast control */
 164 static bool lapic_timer_needs_broadcast(struct acpi_processor *pr,
 165                                         struct acpi_processor_cx *cx)
 166 {
 167         return cx - pr->power.states >= pr->power.timer_broadcast_on_state;
 168 }
 169
 170 #else
 171
 172 static void lapic_timer_check_state(int state, struct acpi_processor *pr,
 173                                    struct acpi_processor_cx *cstate) { }
 174 static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) { }
 175
 176 static bool lapic_timer_needs_broadcast(struct acpi_processor *pr,
 177                                         struct acpi_processor_cx *cx)
 178 {
 179         return false;
 180 }
 181
 182 #endif
 183
 184 #if defined(CONFIG_X86)
 185 static void tsc_check_state(int state)
 186 {
 187         switch (boot_cpu_data.x86_vendor) {
 188         case X86_VENDOR_HYGON:
 189         case X86_VENDOR_AMD:
 190         case X86_VENDOR_INTEL:
 191         case X86_VENDOR_CENTAUR:
 192         case X86_VENDOR_ZHAOXIN:
 193                 /*
 194                  * AMD Fam10h TSC will tick in all
 195                  * C/P/S0/S1 states when this bit is set.
 196                  */
 197                 if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
 198                         return;
 199                 fallthrough;
 200         default:
 201                 /* TSC could halt in idle, so notify users */
 202                 if (state > ACPI_STATE_C1)
 203                         mark_tsc_unstable("TSC halts in idle");
 204         }
 205 }
 206 #else
 207 static void tsc_check_state(int state) { return; }
 208 #endif
 209
 210 static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
 211 {
 212
 213         if (!pr->pblk)
 214                 return -ENODEV;
 215
 216         /* if info is obtained from pblk/fadt, type equals state */
 217         pr->power.states[ACPI_STATE_C2].type = ACPI_STATE_C2;
 218         pr->power.states[ACPI_STATE_C3].type = ACPI_STATE_C3;
 219
 220 #ifndef CONFIG_HOTPLUG_CPU
 221         /*
 222          * Check for P_LVL2_UP flag before entering C2 and above on
 223          * an SMP system.
 224          */
 225         if ((num_online_cpus() > 1) &&
 226             !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
 227                 return -ENODEV;
 228 #endif
 229
 230         /* determine C2 and C3 address from pblk */
 231         pr->power.states[ACPI_STATE_C2].address = pr->pblk + 4;
 232         pr->power.states[ACPI_STATE_C3].address = pr->pblk + 5;
 233
 234         /* determine latencies from FADT */
 235         pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.c2_latency;
 236         pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.c3_latency;
 237
 238         /*
 239          * FADT specified C2 latency must be less than or equal to
 240          * 100 microseconds.
 241          */
 242         if (acpi_gbl_FADT.c2_latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
 243                 acpi_handle_debug(pr->handle, "C2 latency too large [%d]\n",
 244                                   acpi_gbl_FADT.c2_latency);
 245                 /* invalidate C2 */
 246                 pr->power.states[ACPI_STATE_C2].address = 0;
 247         }
 248
 249         /*
 250          * FADT supplied C3 latency must be less than or equal to
 251          * 1000 microseconds.
 252          */
 253         if (acpi_gbl_FADT.c3_latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
 254                 acpi_handle_debug(pr->handle, "C3 latency too large [%d]\n",
 255                                   acpi_gbl_FADT.c3_latency);
 256                 /* invalidate C3 */
 257                 pr->power.states[ACPI_STATE_C3].address = 0;
 258         }
 259
 260         acpi_handle_debug(pr->handle, "lvl2[0x%08x] lvl3[0x%08x]\n",
 261                           pr->power.states[ACPI_STATE_C2].address,
 262                           pr->power.states[ACPI_STATE_C3].address);
 263
 264         snprintf(pr->power.states[ACPI_STATE_C2].desc,
 265                          ACPI_CX_DESC_LEN, "ACPI P_LVL2 IOPORT 0x%x",
 266                          pr->power.states[ACPI_STATE_C2].address);
 267         snprintf(pr->power.states[ACPI_STATE_C3].desc,
 268                          ACPI_CX_DESC_LEN, "ACPI P_LVL3 IOPORT 0x%x",
 269                          pr->power.states[ACPI_STATE_C3].address);
 270
 271         return 0;
 272 }
 273
 274 static int acpi_processor_get_power_info_default(struct acpi_processor *pr)
 275 {
 276         if (!pr->power.states[ACPI_STATE_C1].valid) {
 277                 /* set the first C-State to C1 */
 278                 /* all processors need to support C1 */
 279                 pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
 280                 pr->power.states[ACPI_STATE_C1].valid = 1;
 281                 pr->power.states[ACPI_STATE_C1].entry_method = ACPI_CSTATE_HALT;
 282
 283                 snprintf(pr->power.states[ACPI_STATE_C1].desc,
 284                          ACPI_CX_DESC_LEN, "ACPI HLT");
 285         }
 286         /* the C0 state only exists as a filler in our array */
 287         pr->power.states[ACPI_STATE_C0].valid = 1;
 288         return 0;
 289 }
 290
 291 static int acpi_processor_get_power_info_cst(struct acpi_processor *pr)
 292 {
 293         int ret;
 294
 295         if (nocst)
 296                 return -ENODEV;
 297
 298         ret = acpi_processor_evaluate_cst(pr->handle, pr->id, &pr->power);
 299         if (ret)
 300                 return ret;
 301
 302         if (!pr->power.count)
 303                 return -EFAULT;
 304
 305         pr->flags.has_cst = 1;
 306         return 0;
 307 }
 308
 309 static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
 310                                            struct acpi_processor_cx *cx)
 311 {
 312         static int bm_check_flag = -1;
 313         static int bm_control_flag = -1;
 314
 315
 316         if (!cx->address)
 317                 return;
 318
 319         /*
 320          * PIIX4 Erratum #18: We don't support C3 when Type-F (fast)
 321          * DMA transfers are used by any ISA device to avoid livelock.
 322          * Note that we could disable Type-F DMA (as recommended by
 323          * the erratum), but this is known to disrupt certain ISA
 324          * devices thus we take the conservative approach.
 325          */
 326         else if (errata.piix4.fdma) {
 327                 acpi_handle_debug(pr->handle,
 328                                   "C3 not supported on PIIX4 with Type-F DMA\n");
 329                 return;
 330         }
 331
 332         /* All the logic here assumes flags.bm_check is same across all CPUs */
 333         if (bm_check_flag == -1) {
 334                 /* Determine whether bm_check is needed based on CPU  */
 335                 acpi_processor_power_init_bm_check(&(pr->flags), pr->id);
 336                 bm_check_flag = pr->flags.bm_check;
 337                 bm_control_flag = pr->flags.bm_control;
 338         } else {
 339                 pr->flags.bm_check = bm_check_flag;
 340                 pr->flags.bm_control = bm_control_flag;
 341         }
 342
 343         if (pr->flags.bm_check) {
 344                 if (!pr->flags.bm_control) {
 345                         if (pr->flags.has_cst != 1) {
 346                                 /* bus mastering control is necessary */
 347                                 acpi_handle_debug(pr->handle,
 348                                                   "C3 support requires BM control\n");
 349                                 return;
 350                         } else {
 351                                 /* Here we enter C3 without bus mastering */
 352                                 acpi_handle_debug(pr->handle,
 353                                                   "C3 support without BM control\n");
 354                         }
 355                 }
 356         } else {
 357                 /*
 358                  * WBINVD should be set in fadt, for C3 state to be
 359                  * supported on when bm_check is not required.
 360                  */
 361                 if (!(acpi_gbl_FADT.flags & ACPI_FADT_WBINVD)) {
 362                         acpi_handle_debug(pr->handle,
 363                                           "Cache invalidation should work properly"
 364                                           " for C3 to be enabled on SMP systems\n");
 365                         return;
 366                 }
 367         }
 368
 369         /*
 370          * Otherwise we've met all of our C3 requirements.
 371          * Normalize the C3 latency to expidite policy.  Enable
 372          * checking of bus mastering status (bm_check) so we can
 373          * use this in our C3 policy
 374          */
 375         cx->valid = 1;
 376
 377         /*
 378          * On older chipsets, BM_RLD needs to be set
 379          * in order for Bus Master activity to wake the
 380          * system from C3.  Newer chipsets handle DMA
 381          * during C3 automatically and BM_RLD is a NOP.
 382          * In either case, the proper way to
 383          * handle BM_RLD is to set it and leave it set.
 384          */
 385         acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 1);
 386
 387         return;
 388 }
 389
 390 static int acpi_cst_latency_cmp(const void *a, const void *b)
 391 {
 392         const struct acpi_processor_cx *x = a, *y = b;
 393
 394         if (!(x->valid && y->valid))
 395                 return 0;
 396         if (x->latency > y->latency)
 397                 return 1;
 398         if (x->latency < y->latency)
 399                 return -1;
 400         return 0;
 401 }
 402 static void acpi_cst_latency_swap(void *a, void *b, int n)
 403 {
 404         struct acpi_processor_cx *x = a, *y = b;
 405
 406         if (!(x->valid && y->valid))
 407                 return;
 408         swap(x->latency, y->latency);
 409 }
 410
 411 static int acpi_processor_power_verify(struct acpi_processor *pr)
 412 {
 413         unsigned int i;
 414         unsigned int working = 0;
 415         unsigned int last_latency = 0;
 416         unsigned int last_type = 0;
 417         bool buggy_latency = false;
 418
 419         pr->power.timer_broadcast_on_state = INT_MAX;
 420
 421         for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
 422                 struct acpi_processor_cx *cx = &pr->power.states[i];
 423
 424                 switch (cx->type) {
 425                 case ACPI_STATE_C1:
 426                         cx->valid = 1;
 427                         break;
 428
 429                 case ACPI_STATE_C2:
 430                         if (!cx->address)
 431                                 break;
 432                         cx->valid = 1;
 433                         break;
 434
 435                 case ACPI_STATE_C3:
 436                         acpi_processor_power_verify_c3(pr, cx);
 437                         break;
 438                 }
 439                 if (!cx->valid)
 440                         continue;
 441                 if (cx->type >= last_type && cx->latency < last_latency)
 442                         buggy_latency = true;
 443                 last_latency = cx->latency;
 444                 last_type = cx->type;
 445
 446                 lapic_timer_check_state(i, pr, cx);
 447                 tsc_check_state(cx->type);
 448                 working++;
 449         }
 450
 451         if (buggy_latency) {
 452                 pr_notice("FW issue: working around C-state latencies out of order\n");
 453                 sort(&pr->power.states[1], max_cstate,
 454                      sizeof(struct acpi_processor_cx),
 455                      acpi_cst_latency_cmp,
 456                      acpi_cst_latency_swap);
 457         }
 458
 459         lapic_timer_propagate_broadcast(pr);
 460
 461         return (working);
 462 }
 463
 464 static int acpi_processor_get_cstate_info(struct acpi_processor *pr)
 465 {
 466         unsigned int i;
 467         int result;
 468
 469
 470         /* NOTE: the idle thread may not be running while calling
 471          * this function */
 472
 473         /* Zero initialize all the C-states info. */
 474         memset(pr->power.states, 0, sizeof(pr->power.states));
 475
 476         result = acpi_processor_get_power_info_cst(pr);
 477         if (result == -ENODEV)
 478                 result = acpi_processor_get_power_info_fadt(pr);
 479
 480         if (result)
 481                 return result;
 482
 483         acpi_processor_get_power_info_default(pr);
 484
 485         pr->power.count = acpi_processor_power_verify(pr);
 486
 487         /*
 488          * if one state of type C2 or C3 is available, mark this
 489          * CPU as being "idle manageable"
 490          */
 491         for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
 492                 if (pr->power.states[i].valid) {
 493                         pr->power.count = i;
 494                         pr->flags.power = 1;
 495                 }
 496         }
 497
 498         return 0;
 499 }
 500
 501 /**
 502  * acpi_idle_bm_check - checks if bus master activity was detected
 503  */
 504 static int acpi_idle_bm_check(void)
 505 {
 506         u32 bm_status = 0;
 507
 508         if (bm_check_disable)
 509                 return 0;
 510
 511         acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
 512         if (bm_status)
 513                 acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
 514         /*
 515          * PIIX4 Erratum #18: Note that BM_STS doesn't always reflect
 516          * the true state of bus mastering activity; forcing us to
 517          * manually check the BMIDEA bit of each IDE channel.
 518          */
 519         else if (errata.piix4.bmisx) {
 520                 if ((inb_p(errata.piix4.bmisx + 0x02) & 0x01)
 521                     || (inb_p(errata.piix4.bmisx + 0x0A) & 0x01))
 522                         bm_status = 1;
 523         }
 524         return bm_status;
 525 }
 526
 527 static void wait_for_freeze(void)
 528 {
 529 #ifdef  CONFIG_X86
 530         /* No delay is needed if we are in guest */
 531         if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
 532                 return;
 533 #endif
 534         /* Dummy wait op - must do something useless after P_LVL2 read
 535            because chipsets cannot guarantee that STPCLK# signal
 536            gets asserted in time to freeze execution properly. */
 537         inl(acpi_gbl_FADT.xpm_timer_block.address);
 538 }
 539
 540 /**
 541  * acpi_idle_do_entry - enter idle state using the appropriate method
 542  * @cx: cstate data
 543  *
 544  * Caller disables interrupt before call and enables interrupt after return.
 545  */
 546 static void __cpuidle acpi_idle_do_entry(struct acpi_processor_cx *cx)
 547 {
 548         perf_lopwr_cb(true);
 549
 550         if (cx->entry_method == ACPI_CSTATE_FFH) {
 551                 /* Call into architectural FFH based C-state */
 552                 acpi_processor_ffh_cstate_enter(cx);
 553         } else if (cx->entry_method == ACPI_CSTATE_HALT) {
 554                 acpi_safe_halt();
 555         } else {
 556                 /* IO port based C-state */
 557                 inb(cx->address);
 558                 wait_for_freeze();
 559         }
 560
 561         perf_lopwr_cb(false);
 562 }
 563
 564 /**
 565  * acpi_idle_play_dead - enters an ACPI state for long-term idle (i.e. off-lining)
 566  * @dev: the target CPU
 567  * @index: the index of suggested state
 568  */
 569 static int acpi_idle_play_dead(struct cpuidle_device *dev, int index)
 570 {
 571         struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
 572
 573         ACPI_FLUSH_CPU_CACHE();
 574
 575         while (1) {
 576
 577                 if (cx->entry_method == ACPI_CSTATE_HALT)
 578                         safe_halt();
 579                 else if (cx->entry_method == ACPI_CSTATE_SYSTEMIO) {
 580                         inb(cx->address);
 581                         wait_for_freeze();
 582                 } else
 583                         return -ENODEV;
 584
 585 #if defined(CONFIG_X86) && defined(CONFIG_HOTPLUG_CPU)
 586                 cond_wakeup_cpu0();
 587 #endif
 588         }
 589
 590         /* Never reached */
 591         return 0;
 592 }
 593
 594 static bool acpi_idle_fallback_to_c1(struct acpi_processor *pr)
 595 {
 596         return IS_ENABLED(CONFIG_HOTPLUG_CPU) && !pr->flags.has_cst &&
 597                 !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED);
 598 }
 599
 600 static int c3_cpu_count;
 601 static DEFINE_RAW_SPINLOCK(c3_lock);
 602
 603 /**
 604  * acpi_idle_enter_bm - enters C3 with proper BM handling
 605  * @drv: cpuidle driver
 606  * @pr: Target processor
 607  * @cx: Target state context
 608  * @index: index of target state
 609  */
 610 static int acpi_idle_enter_bm(struct cpuidle_driver *drv,
 611                                struct acpi_processor *pr,
 612                                struct acpi_processor_cx *cx,
 613                                int index)
 614 {
 615         static struct acpi_processor_cx safe_cx = {
 616                 .entry_method = ACPI_CSTATE_HALT,
 617         };
 618
 619         /*
 620          * disable bus master
 621          * bm_check implies we need ARB_DIS
 622          * bm_control implies whether we can do ARB_DIS
 623          *
 624          * That leaves a case where bm_check is set and bm_control is not set.
 625          * In that case we cannot do much, we enter C3 without doing anything.
 626          */
 627         bool dis_bm = pr->flags.bm_control;
 628
 629         /* If we can skip BM, demote to a safe state. */
 630         if (!cx->bm_sts_skip && acpi_idle_bm_check()) {
 631                 dis_bm = false;
 632                 index = drv->safe_state_index;
 633                 if (index >= 0) {
 634                         cx = this_cpu_read(acpi_cstate[index]);
 635                 } else {
 636                         cx = &safe_cx;
 637                         index = -EBUSY;
 638                 }
 639         }
 640
 641         if (dis_bm) {
 642                 raw_spin_lock(&c3_lock);
 643                 c3_cpu_count++;
 644                 /* Disable bus master arbitration when all CPUs are in C3 */
 645                 if (c3_cpu_count == num_online_cpus())
 646                         acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
 647                 raw_spin_unlock(&c3_lock);
 648         }
 649
 650         rcu_idle_enter();
 651
 652         acpi_idle_do_entry(cx);
 653
 654         rcu_idle_exit();
 655
 656         /* Re-enable bus master arbitration */
 657         if (dis_bm) {
 658                 raw_spin_lock(&c3_lock);
 659                 acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
 660                 c3_cpu_count--;
 661                 raw_spin_unlock(&c3_lock);
 662         }
 663
 664         return index;
 665 }
 666
 667 static int acpi_idle_enter(struct cpuidle_device *dev,
 668                            struct cpuidle_driver *drv, int index)
 669 {
 670         struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
 671         struct acpi_processor *pr;
 672
 673         pr = __this_cpu_read(processors);
 674         if (unlikely(!pr))
 675                 return -EINVAL;
 676
 677         if (cx->type != ACPI_STATE_C1) {
 678                 if (cx->type == ACPI_STATE_C3 && pr->flags.bm_check)
 679                         return acpi_idle_enter_bm(drv, pr, cx, index);
 680
 681                 /* C2 to C1 demotion. */
 682                 if (acpi_idle_fallback_to_c1(pr) && num_online_cpus() > 1) {
 683                         index = ACPI_IDLE_STATE_START;
 684                         cx = per_cpu(acpi_cstate[index], dev->cpu);
 685                 }
 686         }
 687
 688         if (cx->type == ACPI_STATE_C3)
 689                 ACPI_FLUSH_CPU_CACHE();
 690
 691         acpi_idle_do_entry(cx);
 692
 693         return index;
 694 }
 695
 696 static int acpi_idle_enter_s2idle(struct cpuidle_device *dev,
 697                                   struct cpuidle_driver *drv, int index)
 698 {
 699         struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
 700
 701         if (cx->type == ACPI_STATE_C3) {
 702                 struct acpi_processor *pr = __this_cpu_read(processors);
 703
 704                 if (unlikely(!pr))
 705                         return 0;
 706
 707                 if (pr->flags.bm_check) {
 708                         u8 bm_sts_skip = cx->bm_sts_skip;
 709
 710                         /* Don't check BM_STS, do an unconditional ARB_DIS for S2IDLE */
 711                         cx->bm_sts_skip = 1;
 712                         acpi_idle_enter_bm(drv, pr, cx, index);
 713                         cx->bm_sts_skip = bm_sts_skip;
 714
 715                         return 0;
 716                 } else {
 717                         ACPI_FLUSH_CPU_CACHE();
 718                 }
 719         }
 720         acpi_idle_do_entry(cx);
 721
 722         return 0;
 723 }
 724
 725 static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr,
 726                                            struct cpuidle_device *dev)
 727 {
 728         int i, count = ACPI_IDLE_STATE_START;
 729         struct acpi_processor_cx *cx;
 730         struct cpuidle_state *state;
 731
 732         if (max_cstate == 0)
 733                 max_cstate = 1;
 734
 735         for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
 736                 state = &acpi_idle_driver.states[count];
 737                 cx = &pr->power.states[i];
 738
 739                 if (!cx->valid)
 740                         continue;
 741
 742                 per_cpu(acpi_cstate[count], dev->cpu) = cx;
 743
 744                 if (lapic_timer_needs_broadcast(pr, cx))
 745                         state->flags |= CPUIDLE_FLAG_TIMER_STOP;
 746
 747                 if (cx->type == ACPI_STATE_C3) {
 748                         state->flags |= CPUIDLE_FLAG_TLB_FLUSHED;
 749                         if (pr->flags.bm_check)
 750                                 state->flags |= CPUIDLE_FLAG_RCU_IDLE;
 751                 }
 752
 753                 count++;
 754                 if (count == CPUIDLE_STATE_MAX)
 755                         break;
 756         }
 757
 758         if (!count)
 759                 return -EINVAL;
 760
 761         return 0;
 762 }
 763
 764 static int acpi_processor_setup_cstates(struct acpi_processor *pr)
 765 {
 766         int i, count;
 767         struct acpi_processor_cx *cx;
 768         struct cpuidle_state *state;
 769         struct cpuidle_driver *drv = &acpi_idle_driver;
 770
 771         if (max_cstate == 0)
 772                 max_cstate = 1;
 773
 774         if (IS_ENABLED(CONFIG_ARCH_HAS_CPU_RELAX)) {
 775                 cpuidle_poll_state_init(drv);
 776                 count = 1;
 777         } else {
 778                 count = 0;
 779         }
 780
 781         for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
 782                 cx = &pr->power.states[i];
 783
 784                 if (!cx->valid)
 785                         continue;
 786
 787                 state = &drv->states[count];
 788                 snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i);
 789                 strlcpy(state->desc, cx->desc, CPUIDLE_DESC_LEN);
 790                 state->exit_latency = cx->latency;
 791                 state->target_residency = cx->latency * latency_factor;
 792                 state->enter = acpi_idle_enter;
 793
 794                 state->flags = 0;
 795                 if (cx->type == ACPI_STATE_C1 || cx->type == ACPI_STATE_C2 ||
 796                     cx->type == ACPI_STATE_C3) {
 797                         state->enter_dead = acpi_idle_play_dead;
 798                         if (cx->type != ACPI_STATE_C3)
 799                                 drv->safe_state_index = count;
 800                 }
 801                 /*
 802                  * Halt-induced C1 is not good for ->enter_s2idle, because it
 803                  * re-enables interrupts on exit.  Moreover, C1 is generally not
 804                  * particularly interesting from the suspend-to-idle angle, so
 805                  * avoid C1 and the situations in which we may need to fall back
 806                  * to it altogether.
 807                  */
 808                 if (cx->type != ACPI_STATE_C1 && !acpi_idle_fallback_to_c1(pr))
 809                         state->enter_s2idle = acpi_idle_enter_s2idle;
 810
 811                 count++;
 812                 if (count == CPUIDLE_STATE_MAX)
 813                         break;
 814         }
 815
 816         drv->state_count = count;
 817
 818         if (!count)
 819                 return -EINVAL;
 820
 821         return 0;
 822 }
 823
 824 static inline void acpi_processor_cstate_first_run_checks(void)
 825 {
 826         static int first_run;
 827
 828         if (first_run)
 829                 return;
 830         dmi_check_system(processor_power_dmi_table);
 831         max_cstate = acpi_processor_cstate_check(max_cstate);
 832         if (max_cstate < ACPI_C_STATES_MAX)
 833                 pr_notice("processor limited to max C-state %d\n", max_cstate);
 834
 835         first_run++;
 836
 837         if (nocst)
 838                 return;
 839
 840         acpi_processor_claim_cst_control();
 841 }
 842 #else
 843
 844 static inline int disabled_by_idle_boot_param(void) { return 0; }
 845 static inline void acpi_processor_cstate_first_run_checks(void) { }
 846 static int acpi_processor_get_cstate_info(struct acpi_processor *pr)
 847 {
 848         return -ENODEV;
 849 }
 850
 851 static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr,
 852                                            struct cpuidle_device *dev)
 853 {
 854         return -EINVAL;
 855 }
 856
 857 static int acpi_processor_setup_cstates(struct acpi_processor *pr)
 858 {
 859         return -EINVAL;
 860 }
 861
 862 #endif /* CONFIG_ACPI_PROCESSOR_CSTATE */
 863
 864 struct acpi_lpi_states_array {
 865         unsigned int size;
 866         unsigned int composite_states_size;
 867         struct acpi_lpi_state *entries;
 868         struct acpi_lpi_state *composite_states[ACPI_PROCESSOR_MAX_POWER];
 869 };
 870
 871 static int obj_get_integer(union acpi_object *obj, u32 *value)
 872 {
 873         if (obj->type != ACPI_TYPE_INTEGER)
 874                 return -EINVAL;
 875
 876         *value = obj->integer.value;
 877         return 0;
 878 }
 879
 880 static int acpi_processor_evaluate_lpi(acpi_handle handle,
 881                                        struct acpi_lpi_states_array *info)
 882 {
 883         acpi_status status;
 884         int ret = 0;
 885         int pkg_count, state_idx = 1, loop;
 886         struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 887         union acpi_object *lpi_data;
 888         struct acpi_lpi_state *lpi_state;
 889
 890         status = acpi_evaluate_object(handle, "_LPI", NULL, &buffer);
 891         if (ACPI_FAILURE(status)) {
 892                 acpi_handle_debug(handle, "No _LPI, giving up\n");
 893                 return -ENODEV;
 894         }
 895
 896         lpi_data = buffer.pointer;
 897
 898         /* There must be at least 4 elements = 3 elements + 1 package */
 899         if (!lpi_data || lpi_data->type != ACPI_TYPE_PACKAGE ||
 900             lpi_data->package.count < 4) {
 901                 pr_debug("not enough elements in _LPI\n");
 902                 ret = -ENODATA;
 903                 goto end;
 904         }
 905
 906         pkg_count = lpi_data->package.elements[2].integer.value;
 907
 908         /* Validate number of power states. */
 909         if (pkg_count < 1 || pkg_count != lpi_data->package.count - 3) {
 910                 pr_debug("count given by _LPI is not valid\n");
 911                 ret = -ENODATA;
 912                 goto end;
 913         }
 914
 915         lpi_state = kcalloc(pkg_count, sizeof(*lpi_state), GFP_KERNEL);
 916         if (!lpi_state) {
 917                 ret = -ENOMEM;
 918                 goto end;
 919         }
 920
 921         info->size = pkg_count;
 922         info->entries = lpi_state;
 923
 924         /* LPI States start at index 3 */
 925         for (loop = 3; state_idx <= pkg_count; loop++, state_idx++, lpi_state++) {
 926                 union acpi_object *element, *pkg_elem, *obj;
 927
 928                 element = &lpi_data->package.elements[loop];
 929                 if (element->type != ACPI_TYPE_PACKAGE || element->package.count < 7)
 930                         continue;
 931
 932                 pkg_elem = element->package.elements;
 933
 934                 obj = pkg_elem + 6;
 935                 if (obj->type == ACPI_TYPE_BUFFER) {
 936                         struct acpi_power_register *reg;
 937
 938                         reg = (struct acpi_power_register *)obj->buffer.pointer;
 939                         if (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO &&
 940                             reg->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)
 941                                 continue;
 942
 943                         lpi_state->address = reg->address;
 944                         lpi_state->entry_method =
 945                                 reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE ?
 946                                 ACPI_CSTATE_FFH : ACPI_CSTATE_SYSTEMIO;
 947                 } else if (obj->type == ACPI_TYPE_INTEGER) {
 948                         lpi_state->entry_method = ACPI_CSTATE_INTEGER;
 949                         lpi_state->address = obj->integer.value;
 950                 } else {
 951                         continue;
 952                 }
 953
 954                 /* elements[7,8] skipped for now i.e. Residency/Usage counter*/
 955
 956                 obj = pkg_elem + 9;
 957                 if (obj->type == ACPI_TYPE_STRING)
 958                         strlcpy(lpi_state->desc, obj->string.pointer,
 959                                 ACPI_CX_DESC_LEN);
 960
 961                 lpi_state->index = state_idx;
 962                 if (obj_get_integer(pkg_elem + 0, &lpi_state->min_residency)) {
 963                         pr_debug("No min. residency found, assuming 10 us\n");
 964                         lpi_state->min_residency = 10;
 965                 }
 966
 967                 if (obj_get_integer(pkg_elem + 1, &lpi_state->wake_latency)) {
 968                         pr_debug("No wakeup residency found, assuming 10 us\n");
 969                         lpi_state->wake_latency = 10;
 970                 }
 971
 972                 if (obj_get_integer(pkg_elem + 2, &lpi_state->flags))
 973                         lpi_state->flags = 0;
 974
 975                 if (obj_get_integer(pkg_elem + 3, &lpi_state->arch_flags))
 976                         lpi_state->arch_flags = 0;
 977
 978                 if (obj_get_integer(pkg_elem + 4, &lpi_state->res_cnt_freq))
 979                         lpi_state->res_cnt_freq = 1;
 980
 981                 if (obj_get_integer(pkg_elem + 5, &lpi_state->enable_parent_state))
 982                         lpi_state->enable_parent_state = 0;
 983         }
 984
 985         acpi_handle_debug(handle, "Found %d power states\n", state_idx);
 986 end:
 987         kfree(buffer.pointer);
 988         return ret;
 989 }
 990
 991 /*
 992  * flat_state_cnt - the number of composite LPI states after the process of flattening
 993  */
 994 static int flat_state_cnt;
 995
 996 /**
 997  * combine_lpi_states - combine local and parent LPI states to form a composite LPI state
 998  *
 999  * @local: local LPI state
1000  * @parent: parent LPI state
1001  * @result: composite LPI state
1002  */
1003 static bool combine_lpi_states(struct acpi_lpi_state *local,
1004                                struct acpi_lpi_state *parent,
1005                                struct acpi_lpi_state *result)
1006 {
1007         if (parent->entry_method == ACPI_CSTATE_INTEGER) {
1008                 if (!parent->address) /* 0 means autopromotable */
1009                         return false;
1010                 result->address = local->address + parent->address;
1011         } else {
1012                 result->address = parent->address;
1013         }
1014
1015         result->min_residency = max(local->min_residency, parent->min_residency);
1016         result->wake_latency = local->wake_latency + parent->wake_latency;
1017         result->enable_parent_state = parent->enable_parent_state;
1018         result->entry_method = local->entry_method;
1019
1020         result->flags = parent->flags;
1021         result->arch_flags = parent->arch_flags;
1022         result->index = parent->index;
1023
1024         strlcpy(result->desc, local->desc, ACPI_CX_DESC_LEN);
1025         strlcat(result->desc, "+", ACPI_CX_DESC_LEN);
1026         strlcat(result->desc, parent->desc, ACPI_CX_DESC_LEN);
1027         return true;
1028 }
1029
1030 #define ACPI_LPI_STATE_FLAGS_ENABLED                    BIT(0)
1031
1032 static void stash_composite_state(struct acpi_lpi_states_array *curr_level,
1033                                   struct acpi_lpi_state *t)
1034 {
1035         curr_level->composite_states[curr_level->composite_states_size++] = t;
1036 }
1037
1038 static int flatten_lpi_states(struct acpi_processor *pr,
1039                               struct acpi_lpi_states_array *curr_level,
1040                               struct acpi_lpi_states_array *prev_level)
1041 {
1042         int i, j, state_count = curr_level->size;
1043         struct acpi_lpi_state *p, *t = curr_level->entries;
1044
1045         curr_level->composite_states_size = 0;
1046         for (j = 0; j < state_count; j++, t++) {
1047                 struct acpi_lpi_state *flpi;
1048
1049                 if (!(t->flags & ACPI_LPI_STATE_FLAGS_ENABLED))
1050                         continue;
1051
1052                 if (flat_state_cnt >= ACPI_PROCESSOR_MAX_POWER) {
1053                         pr_warn("Limiting number of LPI states to max (%d)\n",
1054                                 ACPI_PROCESSOR_MAX_POWER);
1055                         pr_warn("Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n");
1056                         break;
1057                 }
1058
1059                 flpi = &pr->power.lpi_states[flat_state_cnt];
1060
1061                 if (!prev_level) { /* leaf/processor node */
1062                         memcpy(flpi, t, sizeof(*t));
1063                         stash_composite_state(curr_level, flpi);
1064                         flat_state_cnt++;
1065                         continue;
1066                 }
1067
1068                 for (i = 0; i < prev_level->composite_states_size; i++) {
1069                         p = prev_level->composite_states[i];
1070                         if (t->index <= p->enable_parent_state &&
1071                             combine_lpi_states(p, t, flpi)) {
1072                                 stash_composite_state(curr_level, flpi);
1073                                 flat_state_cnt++;
1074                                 flpi++;
1075                         }
1076                 }
1077         }
1078
1079         kfree(curr_level->entries);
1080         return 0;
1081 }
1082
1083 int __weak acpi_processor_ffh_lpi_probe(unsigned int cpu)
1084 {
1085         return -EOPNOTSUPP;
1086 }
1087
1088 static int acpi_processor_get_lpi_info(struct acpi_processor *pr)
1089 {
1090         int ret, i;
1091         acpi_status status;
1092         acpi_handle handle = pr->handle, pr_ahandle;
1093         struct acpi_device *d = NULL;
1094         struct acpi_lpi_states_array info[2], *tmp, *prev, *curr;
1095
1096         /* make sure our architecture has support */
1097         ret = acpi_processor_ffh_lpi_probe(pr->id);
1098         if (ret == -EOPNOTSUPP)
1099                 return ret;
1100
1101         if (!osc_pc_lpi_support_confirmed)
1102                 return -EOPNOTSUPP;
1103
1104         if (!acpi_has_method(handle, "_LPI"))
1105                 return -EINVAL;
1106
1107         flat_state_cnt = 0;
1108         prev = &info[0];
1109         curr = &info[1];
1110         handle = pr->handle;
1111         ret = acpi_processor_evaluate_lpi(handle, prev);
1112         if (ret)
1113                 return ret;
1114         flatten_lpi_states(pr, prev, NULL);
1115
1116         status = acpi_get_parent(handle, &pr_ahandle);
1117         while (ACPI_SUCCESS(status)) {
1118                 d = acpi_fetch_acpi_dev(pr_ahandle);
1119                 handle = pr_ahandle;
1120
1121                 if (strcmp(acpi_device_hid(d), ACPI_PROCESSOR_CONTAINER_HID))
1122                         break;
1123
1124                 /* can be optional ? */
1125                 if (!acpi_has_method(handle, "_LPI"))
1126                         break;
1127
1128                 ret = acpi_processor_evaluate_lpi(handle, curr);
1129                 if (ret)
1130                         break;
1131
1132                 /* flatten all the LPI states in this level of hierarchy */
1133                 flatten_lpi_states(pr, curr, prev);
1134
1135                 tmp = prev, prev = curr, curr = tmp;
1136
1137                 status = acpi_get_parent(handle, &pr_ahandle);
1138         }
1139
1140         pr->power.count = flat_state_cnt;
1141         /* reset the index after flattening */
1142         for (i = 0; i < pr->power.count; i++)
1143                 pr->power.lpi_states[i].index = i;
1144
1145         /* Tell driver that _LPI is supported. */
1146         pr->flags.has_lpi = 1;
1147         pr->flags.power = 1;
1148
1149         return 0;
1150 }
1151
1152 int __weak acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi)
1153 {
1154         return -ENODEV;
1155 }
1156
1157 /**
1158  * acpi_idle_lpi_enter - enters an ACPI any LPI state
1159  * @dev: the target CPU
1160  * @drv: cpuidle driver containing cpuidle state info
1161  * @index: index of target state
1162  *
1163  * Return: 0 for success or negative value for error
1164  */
1165 static int acpi_idle_lpi_enter(struct cpuidle_device *dev,
1166                                struct cpuidle_driver *drv, int index)
1167 {
1168         struct acpi_processor *pr;
1169         struct acpi_lpi_state *lpi;
1170
1171         pr = __this_cpu_read(processors);
1172
1173         if (unlikely(!pr))
1174                 return -EINVAL;
1175
1176         lpi = &pr->power.lpi_states[index];
1177         if (lpi->entry_method == ACPI_CSTATE_FFH)
1178                 return acpi_processor_ffh_lpi_enter(lpi);
1179
1180         return -EINVAL;
1181 }
1182
1183 static int acpi_processor_setup_lpi_states(struct acpi_processor *pr)
1184 {
1185         int i;
1186         struct acpi_lpi_state *lpi;
1187         struct cpuidle_state *state;
1188         struct cpuidle_driver *drv = &acpi_idle_driver;
1189
1190         if (!pr->flags.has_lpi)
1191                 return -EOPNOTSUPP;
1192
1193         for (i = 0; i < pr->power.count && i < CPUIDLE_STATE_MAX; i++) {
1194                 lpi = &pr->power.lpi_states[i];
1195
1196                 state = &drv->states[i];
1197                 snprintf(state->name, CPUIDLE_NAME_LEN, "LPI-%d", i);
1198                 strlcpy(state->desc, lpi->desc, CPUIDLE_DESC_LEN);
1199                 state->exit_latency = lpi->wake_latency;
1200                 state->target_residency = lpi->min_residency;
1201                 if (lpi->arch_flags)
1202                         state->flags |= CPUIDLE_FLAG_TIMER_STOP;
1203                 state->enter = acpi_idle_lpi_enter;
1204                 drv->safe_state_index = i;
1205         }
1206
1207         drv->state_count = i;
1208
1209         return 0;
1210 }
1211
1212 /**
1213  * acpi_processor_setup_cpuidle_states- prepares and configures cpuidle
1214  * global state data i.e. idle routines
1215  *
1216  * @pr: the ACPI processor
1217  */
1218 static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr)
1219 {
1220         int i;
1221         struct cpuidle_driver *drv = &acpi_idle_driver;
1222
1223         if (!pr->flags.power_setup_done || !pr->flags.power)
1224                 return -EINVAL;
1225
1226         drv->safe_state_index = -1;
1227         for (i = ACPI_IDLE_STATE_START; i < CPUIDLE_STATE_MAX; i++) {
1228                 drv->states[i].name[0] = '\0';
1229                 drv->states[i].desc[0] = '\0';
1230         }
1231
1232         if (pr->flags.has_lpi)
1233                 return acpi_processor_setup_lpi_states(pr);
1234
1235         return acpi_processor_setup_cstates(pr);
1236 }
1237
1238 /**
1239  * acpi_processor_setup_cpuidle_dev - prepares and configures CPUIDLE
1240  * device i.e. per-cpu data
1241  *
1242  * @pr: the ACPI processor
1243  * @dev : the cpuidle device
1244  */
1245 static int acpi_processor_setup_cpuidle_dev(struct acpi_processor *pr,
1246                                             struct cpuidle_device *dev)
1247 {
1248         if (!pr->flags.power_setup_done || !pr->flags.power || !dev)
1249                 return -EINVAL;
1250
1251         dev->cpu = pr->id;
1252         if (pr->flags.has_lpi)
1253                 return acpi_processor_ffh_lpi_probe(pr->id);
1254
1255         return acpi_processor_setup_cpuidle_cx(pr, dev);
1256 }
1257
1258 static int acpi_processor_get_power_info(struct acpi_processor *pr)
1259 {
1260         int ret;
1261
1262         ret = acpi_processor_get_lpi_info(pr);
1263         if (ret)
1264                 ret = acpi_processor_get_cstate_info(pr);
1265
1266         return ret;
1267 }
1268
1269 int acpi_processor_hotplug(struct acpi_processor *pr)
1270 {
1271         int ret = 0;
1272         struct cpuidle_device *dev;
1273
1274         if (disabled_by_idle_boot_param())
1275                 return 0;
1276
1277         if (!pr->flags.power_setup_done)
1278                 return -ENODEV;
1279
1280         dev = per_cpu(acpi_cpuidle_device, pr->id);
1281         cpuidle_pause_and_lock();
1282         cpuidle_disable_device(dev);
1283         ret = acpi_processor_get_power_info(pr);
1284         if (!ret && pr->flags.power) {
1285                 acpi_processor_setup_cpuidle_dev(pr, dev);
1286                 ret = cpuidle_enable_device(dev);
1287         }
1288         cpuidle_resume_and_unlock();
1289
1290         return ret;
1291 }
1292
1293 int acpi_processor_power_state_has_changed(struct acpi_processor *pr)
1294 {
1295         int cpu;
1296         struct acpi_processor *_pr;
1297         struct cpuidle_device *dev;
1298
1299         if (disabled_by_idle_boot_param())
1300                 return 0;
1301
1302         if (!pr->flags.power_setup_done)
1303                 return -ENODEV;
1304
1305         /*
1306          * FIXME:  Design the ACPI notification to make it once per
1307          * system instead of once per-cpu.  This condition is a hack
1308          * to make the code that updates C-States be called once.
1309          */
1310
1311         if (pr->id == 0 && cpuidle_get_driver() == &acpi_idle_driver) {
1312
1313                 /* Protect against cpu-hotplug */
1314                 cpus_read_lock();
1315                 cpuidle_pause_and_lock();
1316
1317                 /* Disable all cpuidle devices */
1318                 for_each_online_cpu(cpu) {
1319                         _pr = per_cpu(processors, cpu);
1320                         if (!_pr || !_pr->flags.power_setup_done)
1321                                 continue;
1322                         dev = per_cpu(acpi_cpuidle_device, cpu);
1323                         cpuidle_disable_device(dev);
1324                 }
1325
1326                 /* Populate Updated C-state information */
1327                 acpi_processor_get_power_info(pr);
1328                 acpi_processor_setup_cpuidle_states(pr);
1329
1330                 /* Enable all cpuidle devices */
1331                 for_each_online_cpu(cpu) {
1332                         _pr = per_cpu(processors, cpu);
1333                         if (!_pr || !_pr->flags.power_setup_done)
1334                                 continue;
1335                         acpi_processor_get_power_info(_pr);
1336                         if (_pr->flags.power) {
1337                                 dev = per_cpu(acpi_cpuidle_device, cpu);
1338                                 acpi_processor_setup_cpuidle_dev(_pr, dev);
1339                                 cpuidle_enable_device(dev);
1340                         }
1341                 }
1342                 cpuidle_resume_and_unlock();
1343                 cpus_read_unlock();
1344         }
1345
1346         return 0;
1347 }
1348
1349 static int acpi_processor_registered;
1350
1351 int acpi_processor_power_init(struct acpi_processor *pr)
1352 {
1353         int retval;
1354         struct cpuidle_device *dev;
1355
1356         if (disabled_by_idle_boot_param())
1357                 return 0;
1358
1359         acpi_processor_cstate_first_run_checks();
1360
1361         if (!acpi_processor_get_power_info(pr))
1362                 pr->flags.power_setup_done = 1;
1363
1364         /*
1365          * Install the idle handler if processor power management is supported.
1366          * Note that we use previously set idle handler will be used on
1367          * platforms that only support C1.
1368          */
1369         if (pr->flags.power) {
1370                 /* Register acpi_idle_driver if not already registered */
1371                 if (!acpi_processor_registered) {
1372                         acpi_processor_setup_cpuidle_states(pr);
1373                         retval = cpuidle_register_driver(&acpi_idle_driver);
1374                         if (retval)
1375                                 return retval;
1376                         pr_debug("%s registered with cpuidle\n",
1377                                  acpi_idle_driver.name);
1378                 }
1379
1380                 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
1381                 if (!dev)
1382                         return -ENOMEM;
1383                 per_cpu(acpi_cpuidle_device, pr->id) = dev;
1384
1385                 acpi_processor_setup_cpuidle_dev(pr, dev);
1386
1387                 /* Register per-cpu cpuidle_device. Cpuidle driver
1388                  * must already be registered before registering device
1389                  */
1390                 retval = cpuidle_register_device(dev);
1391                 if (retval) {
1392                         if (acpi_processor_registered == 0)
1393                                 cpuidle_unregister_driver(&acpi_idle_driver);
1394                         return retval;
1395                 }
1396                 acpi_processor_registered++;
1397         }
1398         return 0;
1399 }
1400
1401 int acpi_processor_power_exit(struct acpi_processor *pr)
1402 {
1403         struct cpuidle_device *dev = per_cpu(acpi_cpuidle_device, pr->id);
1404
1405         if (disabled_by_idle_boot_param())
1406                 return 0;
1407
1408         if (pr->flags.power) {
1409                 cpuidle_unregister_device(dev);
1410                 acpi_processor_registered--;
1411                 if (acpi_processor_registered == 0)
1412                         cpuidle_unregister_driver(&acpi_idle_driver);
1413         }
1414
1415         pr->flags.power_setup_done = 0;
1416         return 0;
1417 }