3 # deblob-check version 2008-03-29 $Rev$
4 # Inspired in gNewSense's find-firmware script.
5 # Written by Alexandre Oliva <lxoliva@fsfla.org>
7 # Check http://www.fsfla.org/svn/fsfla/software/linux-libre for newer
10 # Copyright (C) 2008 Alexandre Oliva
12 # This program is free software; you can redistribute it and/or modify
13 # it under the terms of the GNU General Public License as published by
14 # the Free Software Foundation; either version 2 of the License, or
15 # (at your option) any later version.
17 # This program is distributed in the hope that it will be useful, but
18 # WITHOUT ANY WARRANTY; without even the implied warranty of
19 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
20 # General Public License for more details.
22 # You should have received a copy of the GNU General Public License
23 # along with this program; if not, write to the Free Software
24 # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301
28 # usage: deblob-check [-S] [-vv] [-s S] [-lDdBbCcXxPpFftVh?H] \
29 # [*.tar* patch-* *.patch]
31 # Look for too-long undocumented sequences of numbers (generally blobs
32 # in disguise) in source files.
34 # The order of command line flags is significant. Flags given out of
35 # the order above won't be handled correctly, sorry.
37 # -s --sensitivity: must be followed by a blank and a number.
38 # Specifies the number of consecutive integral or
39 # character constants that trigger the blob detector.
41 # The default sensitivity is 32 constants.
43 # The sensitivity, if present, must be the first option. The action
44 # selection, if present, must be the first argument, except for the
45 # sensitivity and verbosity.
47 # The default can be overridden with one of:
49 # -l --list-blobs: list files that contain sequences that match the
50 # blob detector test and that are not known to be false
51 # positives. This is the default option.
53 # -d --deblob --mark-blobs: print the processed input, replacing
54 # sequences that match the blob detector test and that
55 # are NOT known to be false positives with
58 # -D --cat: print the processed input, as it would have been fed to
59 # the blob detector script. Use -S to save the sed
60 # script used to process it, and search for `sedcat:' in
61 # comments to locate the relevant adaptation points.
63 # -b --print-marked-blobs: like -d, but print only the matching
66 # -B --print-blobs: like -b, but do not deblob the sequences.
68 # -c --print-marked-blobs-with-context: like -b, but try to maximize
69 # the context around the blobs. This maximization will
70 # sometimes disregard known false positives, if they
71 # happen to be contained within the extended match.
72 # This is probably an indication that the false positive
73 # matching rule could be improved.
75 # -C --print-blobs-with-context: like -B, but try to maximize the
76 # context around the blobs.
78 # -X --print-all-matches: print all blobs, be they known false
81 # -x --list-all-matches: list files that contain sequences that appear
82 # to be blobs, be they known false positives or not.
84 # -p --mark-false-positives: print the processed input, replacing
85 # sequences that match the blob detector test, but that
86 # are known to be false positives, with /*(DEBLOBBED)*/.
88 # -P --list-false-positives: list files that contain false positives.
90 # -f --print-marked-false-positives: like -p, but print only the
93 # -F --print-false-positives: like -f, but do not deblob the sequences.
95 # -t --test: run (very minimal) self-test.
97 # -V --version: print a version number
99 # -h -? -H --help: print short or long help message
104 # -S --save-scripts: save scripts and temporary files.
106 # -v --verbose: increase verbosity level, for internal debugging. May
107 # be given at most twice.
109 # The exit status is only significant for the --list options: it will
110 # be true if nothing was found, and false otherwise.
112 : # Mark the end of the help message.
116 # - Improve handling of command-line arguments, so as to not make the
119 # - Add an option for the user to feed their own false positive
122 # - Add support to recognize known blobs (or other non-Free
123 # signatures, really), to speed up the scanning of files containing
124 # blobs, and to avoid attempts to disguise blobs.
126 # - Factor out the code in the various print_* and list_* parts of the
127 # sed script, at least in the shell sources. Make sure they're all
128 # included and expanded in a saved --cat script though.
130 # - Add support for file name tagging in patterns, such that blobs or
131 # false positives are recognized only when handling the specific
132 # filename, be it stand-alone, as part of a patch or a tarball. This
133 # should help avoid recognition of actual blobs as false positives
134 # just because there's a symbol with a different name elsewhere.
136 # It is convenient that the patterns provided by the user to
137 # recognize file names can be empty (for backward compatibility), but
138 # this should ideally be phased out in favor of more precise matches.
139 # It's important that files can be recognized with leading tarball or
140 # patch names, that the filename used within the tarball contain
141 # leading garbage, and even that a partial pathname be recognizable
142 # (say recognize drivers/net/whatever.c when the input file is named
143 # ../net/whatever.c).
145 # Rather than using regular expressions to recognize multiple files
146 # it's convenient (but not quite essential) that filename patterns be
147 # specifiable as regular expressions, rather than simple filenames,
148 # but there are other ways around this.
150 # Maintaining begin/end markers in a stack-like fashion as part of
151 # the processed stream, and using the names in them as (optional) part
152 # of the recognition patterns, would enable us to do it.
154 # Introducing annotations next to the false positives (and recognized
155 # blobs) as an early part of the process may speed things up and
156 # enable fast processing, but how to introduce the annotations quickly
157 # in the first place? Given patterns such as
159 # \(\(file1\)\(.*\)\(pat1\)\|\(file2\)\(.*\)\(pat2\)\|...\)
161 # how do we get sed to introduce a marker that contains file2 right
162 # before or right after pat2, without turning a big efficient regexp
163 # into a slowish sequence of s/// commands?
165 # - Re-check and narrow false-positive patterns to make sure they
166 # apply only to the relevant content.
168 # - Scripting abilities, so as to be able to automate the removal of
169 # source files or of blobs from source files in a tarball without
170 # having to extract the entire tarball (as in tar --update/--delete)
171 # would be nice. Carrying over removed files automatically into
172 # patches would also be great, and this sort of script would be
173 # perfect to document what has been done to a tarball plus a set of
174 # patches. Something like deblob.script:
176 # tarball linux-2.6.24.tar.bz2
177 # delete net/wireloss/freedom.c drivers/me/crazy.c
178 # deblob include/linux/slab-blob-kfree.h
179 # deconfig drivers/char/drm DRM_IS_BAD
181 # patch patch-2.6.25-rc7.bz2
182 # delete arch/power/over/you.c
184 # such that the deletes from an earlier file would carry over into the
185 # subsequent ones, and new tarballs and patch files would be generated
186 # with the libre- prefix in their basename, and the xdeltas between
187 # the original files and the modified files would be minimal, and
188 # redundant with this script and the input script while at that.
190 # - Improve documentation of the code.
192 # - Write a decent testsuite.
194 # - Insert your idea here. :-)
196 # Yeah, lots of stuff to do. Want to help?
198 # This makes it much faster, and mostly immune to non-ASCII stuff, as
199 # long as a 8-bit-safe sed is used. Probably a safe assumption these
201 case ${LANG+set} in set) LANG=C; export LANG;; esac
211 # Choose verbosity level for sed script debugging and performance
242 if test "$sens" -gt 0 2>/dev/null; then
245 echo invalid sensitivity: $sens >&2
249 sens=`expr $sens - 1`
259 sed '/^# '$name' version /,/^# Written by/ { s/^# //; p; }; d' < $0
264 sed -n '/^# usage:/,/# -h/ { /^# -/,/^$/{s/^# \(-.*\):.*/\1/p; d; }; s/^\(# \?\)\?//p; }' < $0 &&
266 echo "run \`$name --help | more' for full usage"
271 sed -n '/^# '$name' version /,/^[^#]/ s/^\(# \?\)\?//p' < $0
279 --mark-false-positives | -p)
282 set_sedmain "b list_both;" "p;" "b list_matches;"
286 --print-marked-false-positives | -f)
289 set_sedmain "b print_marked_matches;" "" "b print_marked_matches;"
293 --print-false-positives | -F)
296 set_sedmain "b print_matches;" "" "b print_matches;"
300 --deblob | --mark-blobs | -d)
303 set_sedmain "b list_blobs;" "p;" "p;"
311 "# sedcat: Actual blob detected, but there may be false positives." \
312 "# sedcat: No blob whatsoever found." \
313 "# sedcat: False positives found." \
314 "p; d; # sedcat: Just print stuff, remove this line to run the actual script."
318 --print-marked-blobs | -b)
321 set_sedmain "b print_marked_blobs;"
328 set_sedmain "b print_blobs;"
332 --print-marked-blobs-with-context | -c)
335 set_sedmain "b print_marked_cblobs;"
339 --print-blobs-with-context | -C)
342 set_sedmain "b print_cblobs;"
346 --list-false-positives | -P)
356 --list-all-matches | -x)
369 --print-all-matches | -X)
372 set_sedmain "b print_both;" "" "b print_matches;"
378 -- | -l | --list-blobs) shift;;
382 if test ! -f "$1"; then
383 echo "$name: \`$1' given too late or out of the proper sequence." >&2
384 echo "$name: The order of arguments is significant, see the usage." >&2
407 # Exercise some nasty inputs to see that we recognize them as blobs
425 "#define X { 1, 2, \\
426 3, 4, /* comment */ \\
434 0x4c00c000, 0x00000000, 0x00060000, 0x00000000,
438 case `echo "$string" | $0 -s 4 -c` in
441 *) echo "failed positive test for:
447 # Make sure we do not recognize these as blobs.
450 #define Y { 3, 4 }" \
451 " 0x00, 0x00, 0x00 " \
453 case `echo "$string" | $0 -s 4` in
455 *) echo "failed negative test for:
470 # Call addx as needed to set up more patterns to be recognized as
471 # false positives. Takes the input filename in $1.
474 # Look for a multi-line definition starting with a line that matches
475 # $1 (implicitly anchored to the beginning of the line), and ending
481 # Look for a multi-line definition starting with a line that matches
482 # $1 (implicitly anchored to the beginning of the line), and ending
483 # at the first ';' that's not within comments.
485 addx "$1\\([^;]*\\|$comment\\)*;"
488 # Accept as a non-blob an expression $1 that would have otherwise
489 # triggered blob detection. The expression must end in a way that
490 # would trigger the blob detection machinery.
495 # Match up to the end a comment started in $1.
497 addx "$1\\([^*]\\|[*][*]*[^*/]\\|[*]*[\\n]\\)*[*]*[*][/]"
500 # Match $1 followed by backslash-terminated lines and a last
501 # non-backslash-terminated line.
503 addx "$1\\([^\\n]*\\\\[\\n]\\)*[^\\n\\\\]*$eol"
507 */*linux*.tar* | */*kernel*.tar* | */*linux-*.*.*/*)
508 # false alarms, contain source
509 # drivers/net/wan/wanxlfw.inc_shipped -> wanxlfw.S
510 accept 'static u8 firmware\[\]={[\n]0x60,\(0x00,\)*0x16,\(0x00,\)*\([\n]\(0x[0-9A-F][0-9A-F],\)*\)*[\n]0x23,0xFC,0x00,0x00,0x00,0x01,0xFF,0xF9,0x00,0xD4,0x61,0x00,0x06,0x74,0x33,0xFC,\([\n]\(0x[0-9A-F][0-9A-F],\)*\)*0x00[\n]};'
511 # drivers/usb/serial/xircom_pgs_fw.h -> xircom_pgs.S
512 initnc 'static const struct ezusb_hex_record xircom_pgs_firmware\[\] ='
513 # drivers/usb/serial/keyspan_pda_fw_h -> keyspan_pda.S
514 initnc 'static const struct ezusb_hex_record keyspan_pda_firmware\[\] ='
515 # arch/m68k/ifpsp060/*.sa -> src/*.s
516 accept ' \.long 0x60ff0000,0x02360000,0x60ff0000,0x16260000[\n]'"$sepx$blobpat*"
517 accept ' \.long 0x60ff0000,0x17400000,0x60ff0000,0x15f40000[\n]'"$sepx$blobpat*"
518 # arch/powerpc/platforms/cell/spufs/spu_save_dump.h_shipped -> spu_save.c
519 initnc 'static unsigned int spu_save_code\[\] __attribute__((__aligned__(128))) ='
520 # arch/powerpc/platforms/cell/spufs/spu_restore_dump.h_shipped -> spu_restore.c
521 initnc 'static unsigned int spu_restore_code\[\] __attribute__((__aligned__(128))) ='
522 # drivers/net/ixp2000/ixp2400_tx.ucode -> ixp2400_tx.uc
523 initnc ' \.initial_reg_values = (struct ixp2000_reg_value \[\]) {'
524 # drivers/net/ixp2000/ixp2400_rx.ucode -> ixp2400_rx.uc
525 initnc ' \.initial_reg_values = (struct ixp2000_reg_value \[\]) {'
527 initnc '[ ]*\.\(digest\|entries\|input\|key\|output\|plaintext\|result\)[ ]*= {'
531 accept ' \$3 = {{pge = {{ste = {\(\([0-9][0-9a-fx{},\n ]*\|\(pge\|ste\) =\|<repeats [0-9]\+ times>\)[{},\n ]*\)*<repeats 11 times>}'"$eol"
532 # arch/sparc/lib/divdi3.S
533 accept '__clz_tab:[\n] \.byte 0\(,[0-5]\)\+'"$sepx$blobpat*"
534 accept 'PITBL:[\n] \.long 0xC0040000,0xC90FDAA2,'"$blobpat*"
535 # arch/m68k/mac/mac_penguin.S
536 accept '\(0x[0F][0F],\)\+\\[\n]\(\(0x[0F][0F],\)\+\\[\n]\)*\(0x[0F][0F],\)\+0x00'
537 # arch/s390/kernel/head.S
538 accept '\.lowcase:[\n] \.byte 0x00\(,0x0[1-7]\)\+'"$sepx$blobpat*$eol"
539 # arch/s390/kernel/bitmap.S
540 accept '_zb_findmap:[\n] \.byte 0\(,[123],0\)\+,4'"$sepx$blobpat*$eol"
541 accept '_sb_findmap:[\n] \.byte 8\(,0,[123]\)\+,0'"$sepx$blobpat*$eol"
542 # arch/powerpc/lib/copyuser_64.S
543 accept ' \.section __ex_table,"a"'"$sepx$blobpat*"
544 # arch/powerpc/platforms/iseries/mf.c
545 accept ' memcpy(src, "\\x01\\x00\\x00\\x01\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00".*PROGxxxx'
546 # arch/ppc/platforms/ev64260.c
547 initnc 'static const unsigned int cpu_745x\[2\]\[16\] ='
548 # arch/alpha/lib/fls.c
549 initnc 'const unsigned char __flsm1_tab\[256\] ='
550 # drivers/input/misc/map_to_7segment.h
551 accept '#define _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \\[\n] \(0,\)\+'"$eol"
553 initc ' static int init_values_b\[\] ='
554 # drivers/input/keyboard/atkbd.c
555 initnc 'static unsigned char atkbd_set2_keycode\[512\] ='
556 # drivers/usb/serial/keyspan_pda.S and
557 # drivers/usb/serial/xircom_pgs.S
558 accept 'desc_config1:[\n] \.byte 0x09, 0x02'"$sepx$blobpat*"
559 accept 'string_mfg:[\n]\?\(;\? \.byte[^\n]*[\n]\)\+string_mfg_end:'
560 accept 'string_product:[\n]\?\(;\? \.byte[^\n]*[\n]\)\+string_product_end:'
561 # drivers/media/video/pwc/pwc-nala.h
562 accept ' [/][*] \(SQCIF\|QSIF\|QCIF\|SIF\|CIF\|VGA\) [*][/][\n] {[\n] {'"$blobpat*"
563 # drivers/video/logo/*.ppm
564 accept 'P[13]\([\n]#[^\n]*\)*[\n]*\([\n][0-9 ]*\)\+'
565 # Documentation/specialix.txt
566 accept 'for i in [ 0-9\\\n]*[\n]do'
567 # Documentation/cpu-freq/cpufreq-stats.txt
568 accept ' : 3600000 3400000 3200000 3000000 2800000 '
569 # Documentation/scsi/sym53c8xx_2.txt and
570 # Documentation/scsi/ncr53c8xx_2.txt
571 accept '00 00[\n]64 01[\n]8e 0b[\n][\n][0-9a-f \n]*fe fe'
572 accept '0f 00 08 08 64 00 0a 00 - id 0[\n]'"$blobpat*"
573 accept 'default nvram data:'"$sepx$blobpat*"
574 # Documentation/video4linux/sn9c102.txt
575 accept '0x0458 0x7025[\n]'"$blobpat*"
576 # Documentation/video4linux/et61x251.txt
577 accept '0x102c 0x6151[\n]'"$blobpat*"
578 # Documentation/video4linux/zc0301.txt
579 accept '0x041e 0x4017[\n]'"$blobpat*"
580 # Documentation/uml/UserModeLinux-HOWTO.txt
581 accept ' (gdb) x\/100x \$25[\n] 0x507d2434: 0x507d2434 0x00000000 0x08048000 0x080a4f8c'"$sepx$blobpat*"
582 # Documentation/isdn/README.inc
583 accept ' 1 0 0 0 0x308'"$sepx$blobpat*"
584 # Documentation/sched-stats.txt
585 accept 'domain<N> <cpumask> 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36'"$eol"
586 # net/ipv4/ipvs/ip_vs_sync.c and
587 # net/sctp/sm_make_chunk.c and
588 # include/linux/sctp.h
589 accept '[ * ]*0 1 2 3[\n][ * ]*0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1'
590 # arch/x86/lguest/boot.c
591 accept ' \* 1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0'
592 # drivers/net/fealnx.c
593 ocomment ' [/][*] Configure the PCI bus bursts and FIFO thresholds.'
594 # drivers/hwmon/via686a.c
595 ocomment '[/][*] the original LUT values from Alex van Kaam <darkside@chello\.nl>'
596 # drivers/media/video/saa7114.c
597 initc 'static const unsigned char init\[\] = {[^;]*MODE=0 ;.*SAA_7114_NTSC_HSYNC_START'
600 accept " Psize Ipps Tput Rxint Txint Done Ndone[\\n] ---------------------------------------------------------------\\([\\n][ 0-9]\\+\\)\\+$eol"
601 initnc 'static u_short ataplain_map\[NR_KEYS\] __initdata ='
602 initnc 'static RegInitializer initData\[\] __initdata ='
603 initnc ' static const unsigned char invert5\[\] ='
604 initnc 'static unsigned char alpa2target\[\] ='
605 initnc 'static unsigned char target2alpa\[\] ='
606 oprepline '#define INIT_THREAD [{0},]\+[ ]*\\[ ]*[{0},]\+'
607 initnc 'static uint tas300\(1c\|4\)_\(master\|mixer\|treble\|bass\)_tab\[\]='
608 initnc 'static short dmasound_[au]law2dma16\[\] ='
609 initnc 'static const unsigned short DACVolTable\[101\] ='
612 accept "%canned_values = ([\\n] \\([0-9]\\+ => \\[[ \\n]\\+\\(\\([0-9]\\+\\|'0x[0-9a-f]\\+'\\),[ \\n]*\\)*\\]\\(, \\|[\\n]\\)\\)*);"
614 # from 2.6.25-rc* patches
615 initnc ' int bcomm_irq\[3\*16\] ='
616 initnc ' static const int8 countLeadingZerosHigh\[\] ='
617 initnc 'static struct nic_qp_map nic_qp_mapping_[01]\[\] ='
618 initnc 'static struct regval ov_initvals\[\] ='
619 initnc 'static struct regval stk1125_initvals\[\] ='
620 initnc 'static u8 bnx2x_stats_len_arr\[BNX2X_NUM_STATS\] ='
621 initnc 'static const struct arb_line read_arb_data\[NUM_RD_Q\]\[MAX_RD_ORD + 1\] ='
622 initnc 'static const struct arb_line write_arb_data\[NUM_WR_Q\]\[MAX_WR_ORD + 1\] ='
623 oprepline '#define AR5K_RATES_11A '
624 oprepline '#define AR5K_RATES_11B '
625 oprepline '#define AR5K_RATES_11G '
626 oprepline '#define AR5K_RATES_TURBO '
627 oprepline '#define AR5K_RATES_XR '
628 initnc ' } blinkrates\[\] ='
629 initnc 'static const struct ath5k_ini ar5212_ini\[\] ='
630 initnc 'static const struct ath5k_ini_mode rf5413_ini_mode_end\[\] ='
631 initnc 'static const struct ath5k_ini_rf rfregs_5111\[\] ='
632 initnc 'static const struct ath5k_ini_rf rfregs_5112\[\] ='
633 initnc 'static const struct ath5k_ini_rf rfregs_5112a\[\] ='
634 initnc 'static const struct ath5k_ini_rf rfregs_5413\[\] ='
635 initnc 'const u\(8\|16\|32\) b43_ntab_\(\(adjustpower\|estimatepowerlt\|gainctl\|iqlt\|loftlt\|noisevar1\|tdi[24]0a\)[01]\|channelest\|frame\(lookup\|struct\)\|mcs\|pilot\|tdtrn\|tmap\)\[\] ='
638 # arch/parisc/kernel/perf_images.h
639 initc 'static uint32_t onyx_images\[\]\[PCXU_IMAGE_SIZE\/sizeof(uint32_t)\] __read_mostly ='
640 initc 'static uint32_t cuda_images\[\]\[PCXW_IMAGE_SIZE\/sizeof(uint32_t)\] __read_mostly ='
642 # These are regarded as ok
643 initnc 'static const u8 SN9C102_\(Y\|UV\)_QTABLE[01]\[64\] = {'
644 initnc ' static const u8 jpeg_header\[589\] = {'
645 accept '[ ]\{1,2\}err = sn9c102_write_const_regs(cam\(,[ \n]\+{0x[0-9a-fA-F][0-9a-fA-F], 0x[0-9a-fA-F][0-9a-fA-F]}\)*);'
648 initnc 'static yyconst flex_int\(16\|32\)_t yy_[^[]*\[[][0-9]*\] ='
649 initnc 'static const \(yytype_u\?int\(8\|16\)\|unsigned \(short\( int\)\?\|char\)\) yy[^[]*\[\] ='
650 initnc '\(\| \)static \(const \|\)\(unsigned \(short\|char\)\|struct SiS_[^ ]*\) SiS[^[]*\(\[[] [*0-9]*\]\)\+ *='
652 initnc 'static const a3d_Hrtf_t A3dHrirZeros = {'
653 initnc 'static const a3d_Hrtf_t A3dHrirImpulse = {'
654 initnc 'static const a3d_Hrtf_t A3dHrirOnes = {'
655 initnc 'static const a3d_Hrtf_t A3dHrirSatTest = {'
656 initnc 'static const a3d_Hrtf_t A3dHrirDImpulse = {'
657 initnc 'static const a3d_ItdDline_t A3dItdDlineZeros = {'
658 initnc 'static auxxEqCoeffSet_t asEqCoefsNormal = {'
659 initnc 'static xtalk_dline_t const alXtalkDlineTest = {'
660 initnc 'static struct nand_ecclayout rtc_from4_nand_oobinfo = {'
661 initnc 'static const s16 tempLUT\[\] ='
662 initnc 'static const u8 viaLUT\[\] ='
663 initnc 'static struct { int xres, yres, left, right, upper, lower, hslen, vslen, vfreq; } timmings\[\] __initdata = {'
664 initnc 'static struct platinum_regvals platinum_reg_init_[0-9]* = {'
665 initnc '} sisfb_ddc[sf]modes\[\] __devinitdata ='
666 initnc 'static struct dvb_pll_desc [^\n]* = {'
667 initnc 'static u32 LABELPATCHES\[\] __attribute((unused)) ='
669 initnc 'static dbdev_tab_t dbdev_tab\[\] ='
670 accept '\(EXP\|LOG\|ATAN\)TBL:'"$sepx$blobpat*"
671 initnc 'static char fm_volume_table\[128\] ='
672 initnc 'unsigned int snd_gf1_scale_table\[SNDRV_GF1_SCALE_TABLE_SIZE\] ='
673 # remaining after original deblob_2_6_24, not fully checked
675 oprepline '#define OV51[18]_\(Y\|UV\)QUANTABLE {'
676 initnc ' static unsigned char const data_bit\[64\] ='
677 initnc ' static const u8 data_sbit\[32\] ='
678 initnc ' \.RightCoefs ='
679 initnc ' #define WakeupSeq {'
680 initnc ' SetRate44100\[\] ='
681 initnc ' const short period\[32\] ='
682 initnc ' const static int desc_idx_table\[\] ='
683 initnc ' int prop_bcomm_irq\[3\*16\] ='
684 initnc ' static char logSlopeTable\[128\] ='
685 initnc ' static const int uc_\(dup\|word\)_table\[\]\[2\] ='
686 initnc ' static const struct mc7_timing_params mc7_timings\[\] ='
687 initnc ' static const u8 biphase_tbl\[\] ='
688 initnc ' static const u8 cs170\[7 \* 8\] ='
689 initnc ' static const u8 cs3[13]a\[8 \* 4\] ='
690 initnc ' static const u8 dramsr13\[12 \* 5\] ='
691 initnc ' static const u8 log10\[\] ='
692 initnc ' static const u8 mpeg_hdr_data\[\] ='
693 initnc ' static const u8 sdramtype\[13\]\[5\] ='
694 initnc ' static const u8 t\[\] ='
695 initnc ' static const unsigned int avg_pkts\[NCCTRL_WIN\] ='
696 initnc ' static const unsigned short ac97_defaults\[\] ='
697 initnc ' static int exp_lut\[256\] ='
698 initnc ' static u16 jpeg_tables\[\]\[70\] ='
699 initnc ' static u16 tables\[\] ='
700 initnc ' static u32 logMagTable\[128\] ='
701 initnc ' static u8 init_bufs\[13\]\[5\] ='
702 initnc ' static u8 sine \[\] ='
703 initnc ' static u_short geometry_table\[\]\[[45]\] ='
704 initnc ' static unsigned char CRCTable1\[\] ='
705 initnc ' static unsigned char CRCTable2\[\] ='
706 initnc ' static unsigned char default_colors\[\] ='
707 initnc ' static unsigned char iso_regs\[8\]\[4\] ='
708 initnc ' static unsigned char log_scale\[101\] ='
709 initnc ' static unsigned char msg\[\] ='
710 initnc ' static unsigned char static_pad\[\] ='
711 initnc ' static unsigned char table_alaw2ulaw\[\] ='
712 initnc ' static unsigned char table_ulaw2alaw\[\] ='
713 initnc ' u32 reg_boundaries\[\] ='
715 initnc ' uint8_t tx\[\] ='
716 initnc ' unsigned char saa7111_regs\[\] ='
717 initnc ' unsigned char sas_pcd_m_pg\[\] ='
718 initnc ' } modedb\[5\] ='
719 initnc ' } reg_tbl\[\] ='
720 initnc ' } vals\[\] ='
721 initnc ' } vm_devices\[\] ='
722 initnc ' static const code distfix\[32\] ='
723 initnc ' static const code lenfix\[512\] ='
724 initnc ' int poly\[\]='
725 initnc ' static const unsigned char asso_values\[\] ='
726 initnc ' static unsigned char asso_values\[\] ='
727 initnc ' } cards_ds\[\] ='
728 initnc ' static const int8 countLeadingZerosHigh\[\] ='
729 initnc ' static const unsigned short d\(base\|ext\)\[32\] ='
730 initnc '#define OV511_QUANTABLESIZE 64'
731 initnc 'BYTE BtCard::SRAMTable_\(NTSC\|PAL\)\[\] ='
732 initnc 'BYTE SRAMTable\[\]\[ 60 \] ='
733 accept 'irq_prio_[hdlc]*:'"$sepx$blobpat*"
734 initc '__u8 _ascebc\[256\] ='
735 initc '__u8 _ebc_tolower\[256\] ='
736 initc '__u8 _ebc_toupper\[256\] ='
737 initnc 'adapter_tag_info_t aic7[9x]xx_tag_info\[\] ='
738 initnc 'char dmasound_alaw2dma8\[\] ='
739 initnc 'char dmasound_ulaw2dma8\[\] ='
740 initnc 'const struct aper_size_info_16 agp3_generic_sizes\[AGP_GENERIC_SIZES_ENTRIES\] ='
741 initnc 'const u16 crc_itu_t_table\[256\] ='
742 initnc 'const u8 byte_rev_table\[256\] ='
743 initnc 'const u8 crc7_syndrome_table\[256\] ='
744 initnc 'const unsigned char INIT_2\[127\] ='
745 initnc 'int snd_sf_vol_table\[128\] ='
746 initnc 'static u_char irq_to_siubit\[\] ='
747 initnc 'static u_char irq_to_siureg\[\] ='
748 initnc 'static Byte_t RData\[RDATASIZE\] ='
749 initnc 'static __const__ __u16 gx_coeff\[256\] ='
750 initnc 'static __u8 init7121ntsc\[\] ='
751 initnc 'static __u8 init7121pal\[\] ='
752 initnc 'static __u8 mode8420\(pro\|con\)\[\] ='
753 initnc 'static byte capidtmf_leading_zeroes_table\[0x100\] ='
754 initnc 'static char channel_map_madi_ss\[HDSPM_MAX_CHANNELS\] ='
755 initnc 'static char coefficients\[NM_TOTAL_COEFF_COUNT \* 4\] ='
756 initnc 'static char ecc_syndrome_table\[\] ='
757 initnc 'static char isdn_audio_alaw_to_ulaw\[\] ='
758 initnc 'static char isdn_audio_ulaw_to_alaw\[\] ='
759 initnc 'static char mix_cvt\[101\] ='
760 initnc 'static char opl3_volume_table\[128\] ='
761 initnc 'static const RegInitializer initData\[\] __initdata ='
762 initnc 'static const __u16 crc10_table\[256\] ='
763 initnc 'static const __u32 crc_c\[256\] ='
764 initnc 'static const char zr360[56]0_dht\[0x1a4\] ='
765 initnc 'static const char zr360[56]0_dqt\[0x86\] ='
766 initnc 'static const fixp_t cos_table\[46\] ='
767 initnc 'static const int init_seq\[\] ='
768 initnc 'static const int mobile_vid_table\[32\] ='
769 initnc 'static const s16 snd_opl4_pitch_map\[0x600\] ='
770 initnc 'static const s8 \(b43\(\|legacy\)\|bcm43xx\)_tssi2dbm_[bg]_table\[\] ='
771 initnc 'static const s8 budtab\[256\] ='
772 initnc 'static const struct aper_size_info_32 u3_sizes\[8\] ='
773 initnc 'static const struct aper_size_info_8 via_generic_sizes\[9\] ='
774 initnc 'static const struct color clut_vga16\[16\] ='
775 initnc 'static const struct gain_entry gain_table\[2\]\[108\] ='
776 initnc 'static const struct mV_pos __initdata mobilevrm_mV\[32\] ='
777 initnc 'static const struct mV_pos __initdata vrm85_mV\[32\] ='
778 initnc 'static const struct menelaus_vtg_value vcore_values\[\] ='
779 initnc 'static const struct opl4_region regions_[0-9a-frums]*\[\] ='
780 initnc 'static const struct regval regval_table\[\] ='
781 initnc 'static const struct rf_channel rf_vals_5222\[\] ='
782 initnc 'static const struct rf_channel rf_vals_5225_2527\[\] ='
783 initnc 'static const struct rf_channel rf_vals_5226\[\] ='
784 initnc 'static const struct rf_channel rf_vals_bg\[\] ='
785 initnc 'static const struct rf_channel rf_vals_bg_2522\[\] ='
786 initnc 'static const struct rf_channel rf_vals_bg_2523\[\] ='
787 initnc 'static const struct rf_channel rf_vals_bg_2524\[\] ='
788 initnc 'static const struct rf_channel rf_vals_bg_2525\[\] ='
789 initnc 'static const struct rf_channel rf_vals_bg_2525e\[\] ='
790 initnc 'static const struct rf_channel rf_vals_bg_2528\[\] ='
791 initnc 'static const struct rf_channel rf_vals_noseq\[\] ='
792 initnc 'static const struct rf_channel rf_vals_seq\[\] ='
793 initnc 'static const u16 Sbox\[256\] ='
794 initnc 'static const u16 count_lut\[\] ='
795 # drivers/net/e1000e/phy.c
796 initnc 'static const u16 e1000_igp_2_cable_length_table\[\] ='
797 initnc 'static const u16 rtl8225bcd_rxgain\[\] ='
798 initnc 'static const u16 rtl8225z2_rxgain\[\] ='
799 initnc 'static const u16 stufftab\[5 \* 256\] ='
800 initnc 'static const u16 tkip_sbox\[256\] ='
801 initnc 'static const u16 wm8753_reg\[\] ='
802 initnc 'static const u32 SS[0-3]\[256\] ='
803 initnc 'static const u32 S[1-8]\[64\] ='
804 initnc 'static const u32 T[0-5]\[256\] ='
805 initnc 'static const u32 Tm\[24\]\[8\] ='
806 initnc 'static const u32 bass_table\[41\]\[5\] ='
807 initnc 'static const u32 bf_sbox\[256 \* 4\] ='
808 initnc 'static const u32 camellia_sp0222\[256\] ='
809 initnc 'static const u32 camellia_sp1110\[256\] ='
810 initnc 'static const u32 camellia_sp3033\[256\] ='
811 initnc 'static const u32 camellia_sp4404\[256\] ='
812 initnc 'static const u32 crc32c_table\[256\] ='
813 initnc 'static const u32 db_table\[101\] ='
814 initnc 'static const u32 m8xx_size_to_gray\[M8XX_SIZES_NO\] ='
815 initnc 'static const u32 mds\[4\]\[256\] ='
816 initnc 'static const u32 pc2\[1024\] ='
817 initnc 'static const u32 s[1-7]\[256\] ='
818 initnc 'static const u32 sb8\[256\] ='
819 initnc 'static const u32 tfrc_calc_x_lookup\[TFRC_CALC_X_ARRSIZE\]\[2\] ='
820 initnc 'static const u32 treble_table\[41\]\[5\] ='
821 initnc 'static const u64 [CT][0-7]\[256\] ='
822 initnc 'static const u64 sbox[1-4]\[256\] ='
823 initnc 'static const u64 sha512_K\[80\] ='
824 initnc 'static const u8 Tr\[4\]\[8\] ='
825 initnc 'static const u8 aes_sbox\[256\] ='
826 initnc 'static const u8 calc_sb_tbl\[512\] ='
827 initnc 'static const u8 exp_to_poly\[492\] ='
828 initnc 'static const u8 legal_ansi_char_array\[0x40\] ='
829 initnc 'static const u8 parity\[\] ='
830 initnc 'static const u8 pc1\[256\] ='
831 initnc 'static const u8 poly_to_exp\[255\] ='
832 initnc 'static const u8 q[01]\[256\] ='
833 initnc 'static const u8 ratio_lut\[\] ='
834 initnc 'static const u8 rs\[256\] ='
835 initnc 'static const u8 rtl8225_agc\[\] ='
836 initnc 'static const u8 rtl8225_tx_power_cck\[\] ='
837 initnc 'static const u8 rtl8225_tx_power_cck_ch14\[\] ='
838 initnc 'static const u8 rtl8225z2_tx_gain_cck_ofdm\[\] ='
839 initnc 'static const u8 setup\[\] ='
840 initnc 'static const u8 speedtab \[3\]\[12\] ='
841 initnc 'static const u_char irq_to_siubit\[\] ='
842 initnc 'static const u_char irq_to_siureg\[\] ='
843 initnc 'static const u_char nand_ecc_precalc_table\[\] ='
844 initnc 'static const uint8_t parity\[256\] ='
845 initnc 'static const unsigned char \(UV\|Y\)_QUANTABLE\[64\] ='
846 initnc 'static const unsigned char __initdata mV_mobilevrm\[32\] ='
847 initnc 'static const unsigned char __initdata mV_vrm85\[32\] ='
848 initnc 'static const unsigned char barco_p1\[2\]\[9\]\[7\]\[3\] ='
849 initnc 'static const unsigned char bitcounts\[256\] ='
850 initnc 'static const unsigned char blue\[256\] ='
851 initnc 'static const unsigned char chktab[hl]\[256\] ='
852 initnc 'static const unsigned char comet_miireg2offset\[32\] ='
853 initnc 'static \(const \)\?unsigned char euc2sjisibm_g3upper_map\[\]\[2\] ='
854 initnc 'static const unsigned char green\[256\] ='
855 initnc 'static const unsigned char hash_table_ops\[64\*4\] ='
856 initnc 'static const unsigned char hid_keyboard\[256\] ='
857 initnc 'static const unsigned char mts_direction\[256\/8\] ='
858 initnc 'static const unsigned char red\[256\] ='
859 initnc 'static \(const \)\?unsigned char sjisibm2euc_map\[\]\[2\] ='
860 initnc 'static const unsigned char vol_cvt_datt\[128\] ='
861 initnc 'static const unsigned char wm_vol\[256\] ='
862 initnc 'static const unsigned int MulIdx\[16\]\[16\] ='
863 initnc 'static const unsigned int crctab32\[\] ='
864 initnc 'static const unsigned short crc_flex_table\[\] ='
865 initnc 'static const unsigned short logtable\[256\] ='
866 initnc 'static const unsigned short wd7000_iobase\[\] ='
867 initnc 'static const unsigned short x86_keycodes\[256\] ='
868 initnc 'static const unsigned table\[\] ='
869 initnc 'static int MV300_reg_8bit\[256\] ='
870 initnc 'static int fifo_map\[\]\[MAX_TX_FIFOS\] ='
871 initnc 'static int initial_lfsr\[\] ='
872 initnc 'static int log_tbl\[129\] ='
873 initnc 'static int logitech_expanded_keymap\[LOGITECH_EXPANDED_KEYMAP_SIZE\] ='
874 initnc 'static int miro_fmtuner\[\] ='
875 initnc 'static int miro_tunermap\[\] ='
876 initnc 'static int register_size\[\] ='
877 initnc 'static int reserve_list\[MAX_RES_ARGS\] ='
878 initnc 'static int reverse6\[64\] ='
879 initnc 'static short attack_time_tbl\[128\] ='
880 initnc 'static short beep_wform\[256\] ='
881 initnc 'static short decay_time_tbl\[128\] ='
882 initnc 'static short isdn_audio_[ua]law_to_s16\[\] ='
883 initnc 'static struct cipher_testvec anubis_cbc_dec_tv_template\[\] ='
884 initnc 'static struct cipher_testvec anubis_cbc_enc_tv_template\[\] ='
885 initnc 'static struct cipher_testvec anubis_dec_tv_template\[\] ='
886 initnc 'static struct cipher_testvec anubis_enc_tv_template\[\] ='
887 initnc 'static struct cipher_testvec camellia_cbc_dec_tv_template\[\] ='
888 initnc 'static struct cipher_testvec camellia_cbc_enc_tv_template\[\] ='
889 initnc 'static struct cipher_testvec camellia_dec_tv_template\[\] ='
890 initnc 'static struct cipher_testvec camellia_enc_tv_template\[\] ='
891 initnc 'static struct cipher_testvec cast6_dec_tv_template\[\] ='
892 initnc 'static struct cipher_testvec cast6_enc_tv_template\[\] ='
893 initnc 'static struct cipher_testvec serpent_dec_tv_template\[\] ='
894 initnc 'static struct cipher_testvec serpent_enc_tv_template\[\] ='
895 initnc 'static struct cipher_testvec tea_dec_tv_template\[\] ='
896 initnc 'static struct cipher_testvec tea_enc_tv_template\[\] ='
897 initnc 'static struct cipher_testvec tf_dec_tv_template\[\] ='
898 initnc 'static struct cipher_testvec tf_enc_tv_template\[\] ='
899 initnc 'static struct cipher_testvec tnepres_dec_tv_template\[\] ='
900 initnc 'static struct cipher_testvec xeta_dec_tv_template\[\] ='
901 initnc 'static struct cipher_testvec xeta_enc_tv_template\[\] ='
902 initnc 'static struct cipher_testvec xtea_dec_tv_template\[\] ='
903 initnc 'static struct cipher_testvec xtea_enc_tv_template\[\] ='
904 initnc 'static struct comp_testvec deflate_decomp_tv_template\[\] ='
905 initnc 'static struct hash_testvec aes_xcbc128_tv_template\[\] ='
906 initnc 'static struct hash_testvec crc32c_tv_template\[\] ='
907 initnc 'static struct hash_testvec hmac_sha256_tv_template\[\] ='
908 initnc 'static struct hash_testvec sha256_tv_template\[\] ='
909 initnc 'static struct hash_testvec sha384_tv_template\[\] ='
910 initnc 'static struct hash_testvec sha512_tv_template\[\] ='
911 initnc 'static struct hash_testvec wp256_tv_template\[\] ='
912 initnc 'static struct hash_testvec wp384_tv_template\[\] ='
913 initnc 'static struct hash_testvec wp512_tv_template\[\] ='
914 initnc 'static struct iwl\(3945\)\?_tx_power power_gain_table\[2\]\[IWL_MAX_GAIN_ENTRIES\] ='
915 initnc 'static struct ovcamchip_regvals regvals_init_\(76be\|7[16]20\|7x10\)\[\] ='
916 initnc 'static struct regval_list ov7670_default_regs\[\] ='
917 initnc 'static struct s_c2 SetRate48000\[\] ='
918 initnc 'static struct tea6420_multiplex TEA6420_line\[MXB_AUDIOS+1\]\[2\] ='
919 initnc 'static struct wm_info i810_wm_16_100\[\] ='
920 initnc 'static struct wm_info i810_wm_16_133\[\] ='
921 initnc 'static struct wm_info i810_wm_24_100\[\] ='
922 initnc 'static struct wm_info i810_wm_24_133\[\] ='
923 initnc 'static struct wm_info i810_wm_8_100\[\] ='
924 initnc 'static struct wm_info i810_wm_8_133\[\] ='
925 initnc 'static struct { struct fb_bitfield red, green, blue, transp; int bits_per_pixel; } colors\[\] ='
926 initnc 'static u16 asEqCoefsPipes\[64\] ='
927 initnc 'static u16 asEqCoefsZeros\[50\] ='
928 initnc 'static u16 asEqOutStateZeros\[48\] ='
929 initnc 'static u16 default_key_map \[256\] ='
930 initnc 'static u16 eq_levels\[64\] ='
931 initnc 'static u32 crc32tab\[\] __attribute__ ((aligned(8))) ='
932 initnc 'static u32 ac3_frames\[3\]\[32\] ='
933 initnc 'static u32 adwDecim8\[33\] ='
934 initnc 'static u32 h_prescale\[64\] ='
935 initnc 'static u32 v_gain\[64\] ='
936 initnc 'static u8 cvs_time_value\[\]\[XFER_UDMA_6 - XFER_UDMA_0 + 1\] ='
937 initnc 'static u8 SRAM_Table\[\]\[60\] ='
938 initnc 'static u8 act_time_value\[\]\[8\] ='
939 initnc 'static u8 alps_tdee4_stv0297_inittab\[\] ='
940 initnc 'static u8 bnx2_5706_stats_len_arr\[BNX2_NUM_STATS\] ='
941 initnc 'static u8 bnx2_5708_stats_len_arr\[BNX2_NUM_STATS\] ='
942 initnc 'static u8 flit_desc_map\[\] ='
943 initnc 'static u8 ini_time_value\[\]\[8\] ='
944 initnc 'static u8 init_tab \[\] ='
945 initnc 'static u8 mac_reader\[\] ='
946 initnc 'static u8 mt2131_config1\[\] ='
947 initnc 'static u8 mt2266_init2\[\] ='
948 initnc 'static u8 opera1_inittab\[\] ='
949 initnc 'static u8 rco_time_value\[\]\[8\] ='
950 initnc 'static u8 saa7113_init_regs\[\] ='
951 initnc 'static u8 samsung_tbmu24112_inittab\[\] ='
952 initnc 'static u8 tas3004_treble_table\[\] ='
953 initnc 'static u8 w1_crc8_table\[\] ='
954 initnc 'static u_char const data_sizes_32\[32\] ='
955 initnc 'static u_long ident_map\[32\] ='
956 initnc 'static u_short alt_map\[NR_KEYS\] ='
957 initnc 'static u_short altgr_map\[NR_KEYS\] ='
958 initnc 'static u_short ctrl_alt_map\[NR_KEYS\] ='
959 initnc 'static u_short ctrl_map\[NR_KEYS\] *='
960 initnc 'static u_short shift_ctrl_map\[NR_KEYS\] ='
961 initnc 'static u_short shift_map\[NR_KEYS\] *='
962 initnc 'static uchar perm1\[56\] ='
963 initnc 'static uchar perm2\[48\] ='
964 initnc 'static uchar perm3\[64\] ='
965 initnc 'static uchar perm4\[48\] ='
966 initnc 'static uchar perm5\[32\] ='
967 initnc 'static uchar perm6\[64\] ='
968 initnc 'static uchar sbox\[8\]\[4\]\[16\] ='
969 initnc 'static uint16_t crc_table\[256\] ='
970 initnc 'static uint8_t lpfcAlpaArray\[\] ='
971 initnc 'static uint8_t seqprog\[\] ='
972 initnc 'static unsigned char V110_OffMatrix_9600\[\] ='
973 initnc 'static unsigned char V110_OnMatrix_9600\[\] ='
974 initnc 'static unsigned char a2232_65EC02code\[\] ='
975 initnc 'static unsigned char alaw_main\[\] ='
976 initnc 'static unsigned char atkbd_set3_keycode\[512\] ='
977 initnc 'static unsigned char atkbd_unxlate_table\[128\] ='
978 initnc 'static unsigned char banner_table\[\] ='
979 initnc 'static unsigned char bootlogo_bits\[\] ='
980 initnc 'static unsigned char bus2core_8260\[\] ='
981 initnc 'static unsigned char bus2core_8280\[\] ='
982 initnc 'static unsigned char caseorder\[256\] ='
983 initnc 'static unsigned char crystal_key\[\] ='
984 initnc 'static unsigned char dsp_ulaw\[\] ='
985 initnc 'static unsigned char expressiontab\[128\] ='
986 initnc 'static unsigned char header2\[\] ='
987 initnc 'static unsigned char hidp_keycode\[256\] ='
988 initnc 'static unsigned char ima_adpcm_capture\[\] ='
989 initnc 'static unsigned char ima_adpcm_init\[\] ='
990 initnc 'static unsigned char ima_adpcm_playback\[\] ='
991 initnc 'static unsigned char irq_xlate\[32\] ='
992 initnc 'static unsigned char mulaw_main\[\] ='
993 initnc 'static unsigned char nkbd_keycode\[128\] ='
994 initnc 'static unsigned char pan_volumes\[256\] ='
995 initnc 'static unsigned char parm_block\[32\] ='
996 initnc 'static unsigned char raw3270_ebcgraf\[64\] ='
997 initnc 'static unsigned char rfcomm_crc_table\[256\] ='
998 initnc 'static unsigned char rwa_unlock\[\] __initdata ='
999 initnc 'static unsigned char seqprog\[\] ='
1000 initnc 'static unsigned char snd_opl4_volume_table\[128\] ='
1001 initnc 'static unsigned char splash_bits\[\] ='
1002 initnc 'static unsigned char sunkbd_keycode\[128\] ='
1003 initnc 'static unsigned char ufs_fragtable_8fpb\[\] ='
1004 initnc 'static unsigned char ufs_fragtable_other\[\] ='
1005 initnc 'static unsigned char ulaw_dsp\[\] ='
1006 initnc 'static unsigned char usb_kbd_keycode\[256\] ='
1007 initnc 'static unsigned char vga_font\[cmapsz\] \(BTDATA \|\)='
1008 initnc 'static unsigned char voltab[12]\[128\] ='
1009 initnc 'static unsigned char vpd89_data\[\] ='
1010 initnc 'static unsigned char xtkbd_keycode\[256\] ='
1011 initnc 'static unsigned int ac3_bitrates\[32\] ='
1012 initnc 'static unsigned int bass_volume_table\[\] ='
1013 initnc 'static unsigned int bitrates\[3\]\[16\] ='
1014 initnc 'static unsigned int isa_dma_port\[8\]\[7\] ='
1015 initnc 'static unsigned int master_volume_table\[\] ='
1016 initnc 'static unsigned int mixer_volume_table\[\] ='
1017 initnc 'static unsigned int pan_table\[63\] ='
1018 initnc 'static unsigned int snapper_bass_volume_table\[\] ='
1019 initnc 'static unsigned int snapper_treble_volume_table\[\] ='
1020 initnc 'static unsigned int treble_volume_table\[\] ='
1021 initnc 'static unsigned int valid_mem\[\] ='
1022 initnc 'static unsigned long arthur_to_linux_signals\[32\] ='
1023 initnc 'static unsigned long shmedia_opcode_table\[64\] ='
1024 initnc 'static unsigned nv\([34]\|10\)TableP\(FIFO\|GRAPH\|RAMIN\)\[\]\[2\] ='
1025 initnc 'static unsigned short fcstab\[256\] ='
1026 initnc 'static unsigned short init[1234]\[128\] \/\*__devinitdata\*\/ ='
1027 initnc 'static unsigned short log_table\[LOG_TABLE_SIZE\*2\] ='
1028 initnc 'static unsigned short rc_ioport\[\] ='
1029 initnc 'static unsigned short translations\[\]\[256\] ='
1030 initnc 'static unsigned short treble_parm\[12\]\[9\] ='
1031 initnc 'struct RGBColors TextCLUT\[256\] ='
1032 initnc 'struct VgaRegs GenVgaTextRegs\[NREGS+1\] ='
1033 initnc 'struct battery_thresh spitz_battery_levels_noac\[\] ='
1034 initnc 'struct battery_thresh spitz_battery_levels_acin\[\] ='
1035 initnc 'struct fb_bitfield rgb_bitfields\[\]\[4\] ='
1036 initnc 'struct mode_registers std_modes\[\] ='
1037 initnc 'struct vmode_attr vmode_attrs\[VMODE_MAX\] ='
1038 initnc 'u16 const crc16_table\[256\] ='
1039 initnc 'u16 const crc_ccitt_table\[256\] ='
1040 initnc 'u16 hfsplus_compose_table\[\] ='
1041 initnc 'u16 hfsplus_decompose_table\[\] ='
1042 initnc 'u_char const data_sizes_16\[32\] ='
1043 initnc 'u_short alt_map\[NR_KEYS\] ='
1044 initnc 'u_short altgr_map\[NR_KEYS\] ='
1045 initnc 'u_short ctrl_alt_map\[NR_KEYS\] ='
1046 initnc 'u_short ctrl_map\[NR_KEYS\] *='
1047 initnc 'u_short plain_map\[NR_KEYS\] *='
1048 initnc 'u_short shift_ctrl_map\[NR_KEYS\] ='
1049 initnc 'u_short shift_map\[NR_KEYS\] *='
1050 initnc 'uint patch_2[0f]00\[\] ='
1051 initnc 'uint16_t e1000_igp_cable_length_table\[IGP01E1000_AGC_LENGTH_TABLE_SIZE\] ='
1052 initnc 'uint16_t e1000_igp_2_cable_length_table\[IGP02E1000_AGC_LENGTH_TABLE_SIZE\] ='
1053 initnc '} euc2sjisibm_jisx0212_map\[\] ='
1054 initnc '} freq\[\] ='
1055 initnc '} hps_h_coeff_tab \[\] ='
1056 initnc '} hps_v_coeff_tab \[\] ='
1057 initnc '} init_tab\[\] ='
1058 initnc '} maven_gamma\[\] ='
1059 initnc '} mem_table\[\] ='
1060 initnc '} mxb_saa7740_init\[\] ='
1061 initnc '} pll_table\[\] ='
1062 initnc '} qam256_snr_tab\[\] ='
1063 initnc '} qam64_snr_tab\[\] ='
1064 initnc '} sil_port\[\] ='
1065 initnc '} vsb_snr_tab\[\] ='
1066 initnc '} yss225_registers\[\] __devinitdata ='
1069 initnc ';[/][*]@@ -[0-9]*,[0-9]* +[0-9]*,[0-9]* @@ static uchar sbox\[8\]\[4\]\[16\] = {[*][/];'
1070 accept ' \$3 = {{pge = {{ste = {\(\([0-9][0-9a-fx{},\n ]*\|\(pge\|ste\) =\|<repeats [0-9]\+ times>\)[{},\n ]*\)*<repeats 11 times>}'"$eol"
1071 initnc 'static yyconst flex_int\(16\|32\)_t yy_[^[]*\[[0-9]*\] ='
1072 initnc 'static const yytype_u\?int\(8\|16\) yy[^[]*\[\] ='
1073 initnc ' int bcomm_irq\[3\*16\] ='
1074 initnc ' static const int8 countLeadingZerosHigh\[\] ='
1075 initnc 'static unsigned long shmedia_opcode_table\[64\] ='
1076 initnc 'u_char const data_sizes_16\[32\] ='
1077 initnc 'static u_char const data_sizes_32\[32\] ='
1078 initnc ' \.\(digest\|entries\|input\|key\|output\|plaintext\|result\)[ ]*= {'
1079 initnc 'static struct [^\n]*_testvec [^\n]*_tv_template\[\] ='
1080 initnc 'static struct nic_qp_map nic_qp_mapping_[01]\[\] ='
1081 initnc 'static u8 mt2266_init2\[\] ='
1082 initnc 'static struct regval ov_initvals\[\] ='
1083 initnc 'static struct regval stk1125_initvals\[\] ='
1084 initnc 'static u8 bnx2x_stats_len_arr\[BNX2X_NUM_STATS\] ='
1085 initnc 'static const struct arb_line read_arb_data\[NUM_RD_Q\]\[MAX_RD_ORD + 1\] ='
1086 initnc 'static const struct arb_line write_arb_data\[NUM_WR_Q\]\[MAX_WR_ORD + 1\] ='
1087 initnc 'uint16_t e1000_igp_cable_length_table\[IGP01E1000_AGC_LENGTH_TABLE_SIZE\] ='
1088 initnc 'uint16_t e1000_igp_2_cable_length_table\[IGP02E1000_AGC_LENGTH_TABLE_SIZE\] ='
1089 oprepline '#define AR5K_RATES_11A '
1090 oprepline '#define AR5K_RATES_11B '
1091 oprepline '#define AR5K_RATES_11G '
1092 oprepline '#define AR5K_RATES_TURBO '
1093 oprepline '#define AR5K_RATES_XR '
1094 initnc ' } blinkrates\[\] ='
1095 initnc 'static const struct ath5k_ini ar5212_ini\[\] ='
1096 initnc 'static const struct ath5k_ini_mode rf5413_ini_mode_end\[\] ='
1097 initnc 'static const struct ath5k_ini_rf rfregs_5111\[\] ='
1098 initnc 'static const struct ath5k_ini_rf rfregs_5112\[\] ='
1099 initnc 'static const struct ath5k_ini_rf rfregs_5112a\[\] ='
1100 initnc 'static const struct ath5k_ini_rf rfregs_5413\[\] ='
1101 initnc 'static const u16 rtl8225bcd_rxgain\[\] ='
1102 initnc 'static const u8 rtl8225_agc\[\] ='
1103 initnc 'static const u8 rtl8225_tx_power_cck\[\] ='
1104 initnc 'static const u8 rtl8225_tx_power_cck_ch14\[\] ='
1105 initnc 'static const u16 rtl8225z2_rxgain\[\] ='
1106 accept ' \( 49,\)*[\n]\([ 0-9,]*[\n]\)* \( 49,\)*'"$eol"
1107 initnc 'static const unsigned char wm_vol\[256\] ='
1108 accept 'domain<N> <cpumask> 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36'"$eol"
1109 # drivers/net/e1000e/phy.c
1110 initnc 'static const u16 e1000_igp_2_cable_length_table\[\] ='
1111 accept ' 24 => \[[\n]\([^\n]*[\n]\)* \]\(, [0-9]\+ => \[\)\?'"$eol"
1112 accept ' '"'"'0x[^\n]*[\n]\([^\n]*[\n]\)* \]\(, [0-9]\+ => \[\)\?'"$eol"
1113 initnc 'const u\(8\|16\|32\) b43_ntab_\(\(adjustpower\|estimatepowerlt\|gainctl\|iqlt\|loftlt\|noisevar1\|tdi[24]0a\)[01]\|channelest\|frame\(lookup\|struct\)\|mcs\|pilot\|tdtrn\|tmap\)\[\] ='
1115 */nouveau-drm*.patch)
1116 initnc '\(static uint32_t\|}\) nv04_graph_ctx_regs \[\] ='
1117 initnc 'static int nv10_graph_ctx_regs \[\] ='
1119 # Although the developers of the drivers are not trying to stop
1120 # anyone from modifying it or understanding it, they acknowledge
1121 # these are bits of code, obtained through mmio interactions.
1122 # This means these blobs are not source code, AND original authors
1123 # of the blobs have power to stop others from modifying them.
1124 # Non-Free software, for sure.
1126 # initnc 'static uint32_t nv\(4[013467ace]\|49_4b\|8[46]\)_ctx_\(voodoo\|prog\)\[\] ='
1128 */linux-2.6-lirc.patch)
1129 initnc 'const unsigned char map_table\[\] ='
1131 */linux-2.6-modsign-mpilib.patch)
1132 initnc 'const unsigned char __clz_tab\[\] ='
1134 */linux-2.6-wireless*.patch)
1135 initnc 'const u\(8\|16\|32\) b43_ntab_\(\(adjustpower\|estimatepowerlt\|gainctl\|iqlt\|loftlt\|noisevar1\|tdi[24]0a\)[01]\|channelest\|frame\(lookup\|struct\)\|mcs\|pilot\|tdtrn\|tmap\)\[\] ='
1136 initnc 'static const s8 \(b43\(legacy\)\?\|bcm43xx\)_tssi2dbm_[bg]_table\[\] ='
1137 initnc 'static struct iwl\(3945\)\?_tx_power power_gain_table\[2\]\[IWL_MAX_GAIN_ENTRIES\] ='
1138 initnc 'static const struct gain_entry gain_table\[2\]\[108\] ='
1139 initnc 'static const struct rf_channel rf_vals_5222\[\] ='
1140 initnc 'static const struct rf_channel rf_vals_5225_2527\[\] ='
1141 initnc 'static const struct rf_channel rf_vals_5226\[\] ='
1142 initnc 'static const struct rf_channel rf_vals_bg\[\] ='
1143 initnc 'static const struct rf_channel rf_vals_bg_2522\[\] ='
1144 initnc 'static const struct rf_channel rf_vals_bg_2523\[\] ='
1145 initnc 'static const struct rf_channel rf_vals_bg_2524\[\] ='
1146 initnc 'static const struct rf_channel rf_vals_bg_2525\[\] ='
1147 initnc 'static const struct rf_channel rf_vals_bg_2525e\[\] ='
1148 initnc 'static const struct rf_channel rf_vals_bg_2528\[\] ='
1149 initnc 'static const struct rf_channel rf_vals_noseq\[\] ='
1150 initnc 'static const struct rf_channel rf_vals_seq\[\] ='
1151 initnc ' static const u8 t\[\] ='
1152 initnc 'static const u16 rtl8225bcd_rxgain\[\] ='
1153 initnc 'static const u8 rtl8225_agc\[\] ='
1154 initnc 'static const u8 rtl8225_tx_power_cck\[\] ='
1155 initnc 'static const u8 rtl8225_tx_power_cck_ch14\[\] ='
1156 initnc 'static const u16 rtl8225z2_rxgain\[\] ='
1157 initnc 'static const struct ath5k_ini_rf rfregs_5111\[\] ='
1158 initnc 'static const struct ath5k_ini_rf rfregs_5112\[\] ='
1159 initnc 'static const struct ath5k_ini_rf rfregs_5112a\[\] ='
1160 initnc 'static const struct ath5k_ini_rf rfregs_5413\[\] ='
1161 oprepline '#define AR5K_RATES_11A '
1162 oprepline '#define AR5K_RATES_11B '
1163 oprepline '#define AR5K_RATES_11G '
1164 oprepline '#define AR5K_RATES_TURBO '
1165 oprepline '#define AR5K_RATES_XR '
1166 initnc 'static const struct ath5k_ini ar5212_ini\[\] ='
1167 initnc 'static const struct ath5k_ini_mode rf\(5413\|24\(13\|25\)\)_ini_mode_end\[\] ='
1168 initnc ' } blinkrates\[\] ='
1171 accept ' sudo modprobe ath5k debug=0x00000400[\n][ ]*[\n]\([ ]*Band[^\n]*[\n]\([ ]*\(\(channels\|rates\):\|[- 0-9a-f]*\|\[\.\.\. etc \]\)[\n]\)\+\)\+ 540 000c 0000 0000'
1172 oprepline ' { 1, MODULATION_XR, 3000, 1, 150, 3 },'
1174 */linux-2.6-drm-i915-modeset.patch)
1175 initnc 'static const u32 filter_table\[\] ='
1177 */linux-2.6-netdev-e1000e*.patch)
1178 # drivers/net/e1000e/phy.c
1179 initnc 'static const u16 e1000_igp_2_cable_length_table\[\] ='
1184 # Regular expression that matches a literal constant.
1185 constx="[0-9][0-9a-fA-FxX]*"
1186 # Regular expression that matches a separator between consecutive
1187 # literal constants.
1188 sepx="\\([,:{} \\nLlUu\"\'\\\\]\\+[xX\$]\\?\\|[ \\n]*[.][a-zA-Z][a-zA-Z0-9]*[ ]\\+[\$]\\?\\)"
1190 # Regular expression that matches a continuation of a blob, after an
1191 # initial constant. *, \+ and \? can be safely appended to it without
1193 blobcont="\\($sepx$constx\\)"
1195 # Regular expression that matches the initial constant of a blob plus
1196 # its continuation. *, \+ and \? can be safely appended to it without
1198 blobpat="$constx$blobcont"
1200 # Regular expression that matches a blob with the exact number of
1201 # constants specified as sensitivity.
1202 blobseq="$blobpat\\{$sens\\}"
1204 # Regular expression that matches a blob with the exact specified
1205 # length, or longer.
1206 blobfseq="$blobseq$blobcont*"
1208 # Regular expression that matches the beginning of the pattern or a
1209 # line break. It must be \(\)ed, such that it can be named in
1210 # replacement patterns without being named.
1211 bol="\\(^\\|[\\n]\\)"
1213 # Regular expression that matches the end of the pattern or a line
1214 # break. It must be \(\)ed, such that it can be named in replacement
1215 # patterns without being named.
1216 eol="\\([\\n]\\|\$\\)"
1218 # Regular expression that matches a C-style comment.
1219 comment="\\([/][*]\\([^*]*\\|[*]\\+[^/*]\\)*[*]\\+[/]\\|[/][/][^\\n]*[\\n]\\)"
1221 # Regular expression that matches comments typically used in assembly.
1222 asmcomment="\\($comment\\|[;#][^\\n]*[\\n]\\)"
1224 # Regular expression that matches a braced initializer containing at
1226 initblob="[^\\n]*=\\([ \\n\\\\]*\\|$comment\\)*{\\([^;]*\\|$comment\\)*$blobseq\\([^;]*\\|$comment\\)*}\\?\\([ \\n\\\\]*\\|$comment\\);\\?"
1228 # Regular expression that matches a C (possibly multi-line) #define
1229 # that contains a blob.
1230 defineblob='[ ]*#[ ]*define[ ]\+\([^\n]*\\[\n]\)*[^\n]*'"$blobseq"'\([^\n]*\\[\n]\)*'
1232 # Regular expression that matches an assembly label followed by a blob
1233 # without any intervening label.
1234 asmblob="[a-zA-Z_.][^\\n:;#/ ]*[ ]*:\\([^:]*\\|$asmcomment\\)*$blobseq\\([^:]*\\|$asmcomment\\)*"
1236 # Regular expression that matches one or more blobs without
1237 # intervening line breaks.
1238 sblobctx="\\([^\\n]*$blobfseq\\)\\+"
1240 # Regular expression that matches the context for a long blob match.
1241 lblobctx="\\($initblob\\|$defineblob\\|$asmblob\\|$sblobctx\\)"
1243 # Set up the sed script that will go through the (processed) input,
1244 # looking for sequences of blobs and printing whatever was requested.
1245 # It accepts 3 arguments.
1247 # $1 is the action in case blobs were found in the input.
1249 # $2 is the action in case no blobs were found, not even false positives.
1251 # $3 is the action in case false positives were located.
1253 # $4 is the action for every complete input pattern.
1256 falsepos=`sed 's,^\\\|,,;s,^,\\\\(,;s,$,\\\\),' < "$falsepos_name"`
1258 if test -s "$falsepos_name"; then
1259 check_false_positives="$v:???falsepos
1260 /$bol$falsepos/!b blob;
1263 s/$bol$falsepos/\\1;\/**\/;/g;
1264 # See if, after removing all matches, we end up without any blobs.
1274 check_false_positives=
1278 /^;[/][*]\\(end .*\\)\\?[*][/];$/{
1293 /^;[/][*]end [^\\n]*[*][/];$/! {
1301 s/^\(;[/][*]begin [^\n]*[\n]\)*//;
1302 s/\\($bol;[/][*]\\(end [^\n]*\\)\\?[*][/];\\)*$//;
1305 $check_false_positives
1322 $v:delete unmatching lines
1324 s/[\\n]$falsepos.*//;
1325 : print_matches_nomatch_loop
1331 b print_matches_nomatch_loop;
1334 b print_matches_delete_to_eol;
1337 s/^\\($falsepos[^\\n]*\\)\\([\\n].*\\)\\?$/\\1/;
1338 $v:narrowed to match
1345 s/^\\($falsepos[^\\n]*\\)//;
1346 : print_matches_delete_to_eol
1353 : print_marked_matches
1354 $v:print_marked_matches
1357 s/[\\n]$falsepos.*//;
1358 : print_marked_matches_nomatch_loop
1364 b print_marked_matches_nomatch_loop;
1367 b print_marked_matches_delete_to_eol;
1370 s/^\\($falsepos[^\\n]*\\)\\([\\n].*\\)\\?$/\\1/;
1371 $v:narrowed to match
1375 s/{\\($sepx\\)\\?$blobfseq\\($sepx\\)\\?}[ ]*;/{\/*(DEBLOBBED)*\/};/g;
1376 s/$blobfseq/\/*(DEBLOBBED)*\//g;
1380 s/^\\($falsepos[^\\n]*\\)//;
1381 : print_marked_matches_delete_to_eol
1386 b print_marked_matches;
1391 $v:delete false positive
1392 # This is tricky. We don't want to print the false positive.
1393 /^$falsepos[^\\n]*$blobseq/ {
1394 $v:delete false positive immediately followed by blob
1396 s/^\\($falsepos\\)[^\\n]*$blobseq.*/\\1/;
1397 : print_blobs_match_loop
1403 b print_blobs_match_loop;
1406 b print_blobs_delete_to_eol;
1409 b print_blobs_delete_to_eol;
1411 /^[^\\n]*$blobseq/! {
1412 $v:delete non-blob header
1414 s/[\\n]\\($falsepos\\|[^\\n]*$blobseq\\).*//;
1415 : print_blobs_nomatch_loop
1421 b print_blobs_nomatch_loop;
1424 b print_blobs_delete_to_eol;
1429 s/^\\([^\\n]*\\($blobfseq[^\\n]*\\)\\+\\)\\([\\n].*\\)\\?$/\\1/;
1433 s/^\\([^\\n]*\\($blobfseq[^\\n]*\\)\\+\\)//;
1434 : print_blobs_delete_to_eol
1441 : print_marked_blobs
1442 $v:print_marked_blobs
1444 $v:delete false positive
1445 # This is tricky. We don't want to print the false positive.
1446 /^$falsepos[^\\n]*$blobseq/ {
1447 $v:delete false positive immediately followed by blob
1449 s/^\\($falsepos\\)[^\\n]*$blobseq.*/\\1/;
1450 : print_marked_blobs_match_loop
1456 b print_marked_blobs_match_loop;
1459 b print_marked_blobs_delete_to_eol;
1462 b print_marked_blobs_delete_to_eol;
1464 /^[^\\n]*$blobseq/! {
1465 $v:delete non-blob header
1467 s/[\\n]\\($falsepos\\|[^\\n]*$blobseq\\).*//;
1468 : print_marked_blobs_nomatch_loop
1474 b print_marked_blobs_nomatch_loop;
1477 b print_marked_blobs_delete_to_eol;
1482 s/^\\([^\\n]*\\($blobfseq[^\\n]*\\)\\+\\)\\([\\n].*\\)\\?$/\\1/;
1484 s/{\\($sepx\\)\\?$blobfseq\\($sepx\\)\\?}[ ]*;/{\/*(DEBLOBBED)*\/};/g;
1485 s/$blobfseq/\/*(DEBLOBBED)*\//g;
1488 s/^\\([^\\n]*\\($blobfseq[^\\n]*\\)\\+\\)//;
1489 : print_marked_blobs_delete_to_eol
1494 b print_marked_blobs;
1499 $v:delete false positive
1500 # This is tricky. We don't want to print the false positive.
1501 /^$falsepos[^\\n]*$blobseq/ {
1502 $v:delete false positive immediately followed by blob
1504 s/^\\($falsepos\\)[^\\n]*$blobseq.*/\\1/;
1505 : print_cblobs_match_loop
1511 b print_cblobs_match_loop;
1514 b print_cblobs_delete_to_eol;
1517 b print_cblobs_delete_to_eol;
1520 $v:delete non-blob header
1522 s/[\\n]\\($falsepos\\|$lblobctx\\).*//;
1523 : print_cblobs_nomatch_loop
1529 b print_cblobs_nomatch_loop;
1532 b print_cblobs_delete_to_eol;
1537 s/^\\($lblobctx[^\\n]*\\($blobfseq[^\\n]*\\)*\\)\\([\\n].*\\)\\?$/\\1/;
1541 s/^\\($lblobctx[^\\n]*\\($blobfseq[^\\n]*\\)*\\)//;
1542 : print_cblobs_delete_to_eol
1549 : print_marked_cblobs
1550 $v:print_marked_cblobs
1552 $v:delete false positive
1553 # This is tricky. We don't want to print the false positive.
1554 /^$falsepos[^\\n]*$blobseq/ {
1555 $v:delete false positive immediately followed by blob
1557 s/^\\($falsepos\\)[^\\n]*$blobseq.*/\\1/;
1558 : print_marked_cblobs_match_loop
1564 b print_marked_cblobs_match_loop;
1567 b print_marked_cblobs_delete_to_eol;
1570 b print_marked_cblobs_delete_to_eol;
1573 $v:delete non-blob header
1575 s/[\\n]\\($falsepos\\|$lblobctx\\).*//;
1576 : print_marked_cblobs_nomatch_loop
1582 b print_marked_cblobs_nomatch_loop;
1585 b print_marked_cblobs_delete_to_eol;
1590 s/^\\($lblobctx[^\\n]*\\($blobfseq[^\\n]*\\)*\\)\\([\\n].*\\)\\?$/\\1/;
1592 s/{\\($sepx\\)\\?$blobfseq\\($sepx\\)\\?}[ ]*;/{\/*(DEBLOBBED)*\/};/g;
1593 s/$blobfseq/\/*(DEBLOBBED)*\//g;
1596 s/^\\($lblobctx[^\\n]*\\($blobfseq[^\\n]*\\)*\\)//;
1597 : print_marked_cblobs_delete_to_eol
1602 b print_marked_cblobs;
1606 /^\\($falsepos\\|[^\\n]*$blobseq\\)/! {
1607 $v:delete non-blob header
1609 s/[\\n]\\($falsepos\\|[^\\n]*$blobseq\\).*//;
1610 : print_both_nomatch_loop
1616 b print_both_nomatch_loop;
1619 b print_both_delete_to_eol;
1624 s/^\\(\\($falsepos[^\\n]*\\|[^\\n]*$blobfseq[^\\n]*\\)\\($blobfseq[^\\n]*\\)*\\)\\([\\n].*\\)\\?$/\\1/;
1628 s/^\\(\\($falsepos[^\\n]*\\|[^\\n]*$blobfseq[^\\n]*\\)\\($blobfseq[^\\n]*\\)*\\)//;
1629 : print_both_delete_to_eol
1639 $v:print unmatching lines
1641 s/[\\n]$falsepos.*//;
1643 : list_matches_nomatch_loop
1649 b list_matches_nomatch_loop;
1652 b list_matches_delete_to_eol;
1655 s/^\\($falsepos[^\\n]*\\)\\([\\n].*\\)\\?$/\\1/;
1656 $v:narrowed to match
1658 s/{\\($sepx\\)\\?$blobfseq\\($sepx\\)\\?}[ ]*;/{\/*(DEBLOBBED)*\/};/g;
1659 s/$blobfseq/\/*(DEBLOBBED)*\//g;
1663 s/^\\($falsepos[^\\n]*\\)//;
1664 : list_matches_delete_to_eol
1674 $v:print false positive
1675 # This is tricky. We don't want to deblob the false positive.
1676 /^$falsepos[^\\n]*$blobseq/ {
1677 $v:print false positive immediately followed by blob
1679 s/^\\($falsepos\\)[^\\n]*$blobseq.*/\\1/;
1680 : list_blobs_match_loop
1687 b list_blobs_match_loop;
1690 b list_blobs_delete_to_eol;
1693 s/^\\($falsepos[^\\n]*\\)[\\n].*/\\1/;
1696 s/^\\($falsepos[^\\n]*\\)//;
1697 b list_blobs_delete_to_eol;
1699 /^[^\\n]*$blobseq/! {
1700 $v:print non-blob header
1702 s/[\\n]\\($falsepos\\|[^\\n]*$blobseq\\).*//;
1704 : list_blobs_nomatch_loop
1710 b list_blobs_nomatch_loop;
1713 b list_blobs_delete_to_eol;
1716 s/^\\([^\\n]*\\($blobfseq[^\\n]*\\)\\+\\)\\([\\n].*\\)\\?$/\\1/;
1718 s/{\\($sepx\\)\\?$blobfseq\\($sepx\\)\\?}[ ]*;/{\/*(DEBLOBBED)*\/};/g;
1719 s/$blobfseq/\/*(DEBLOBBED)*\//g;
1722 s/^\\([^\\n]*\\($blobfseq[^\\n]*\\)\\+\\)//;
1723 : list_blobs_delete_to_eol
1732 /^\\($falsepos\\|[^\\n]*$blobseq\\)/! {
1733 $v:print non-blob header
1735 s/[\\n]\\($falsepos\\|[^\\n]*$blobseq\\).*//;
1737 : list_both_nomatch_loop
1743 b list_both_nomatch_loop;
1746 b list_both_delete_to_eol;
1749 s/^\\(\\($falsepos[^\\n]*\\|[^\\n]*$blobfseq[^\\n]*\\)\\($blobfseq[^\\n]*\\)*\\)\\([\\n].*\\)\\?$/\\1/;
1751 s/{\\($sepx\\)\\?$blobfseq\\($sepx\\)\\?}[ ]*;/{\/*(DEBLOBBED)*\/};/g;
1752 s/$blobfseq/\/*(DEBLOBBED)*\//g;
1755 s/^\\(\\($falsepos[^\\n]*\\|[^\\n]*$blobfseq[^\\n]*\\)\\($blobfseq[^\\n]*\\)*\\)//;
1756 : list_both_delete_to_eol
1766 # Process an input file named in $1 and run it through the blob
1767 # recognizer. Functions set_except and set_sed_cmd provide additional
1768 # arguments on a per-file and per-action basis.
1771 case "$#" in 1) ;; *) echo ICE >&2; exit 1;; esac
1775 falsepos_name=`mktemp -t deblob-check-falsepos-XXXXXX`
1776 tempfiles="$falsepos_name"
1778 # Add $1 to falsepos. Its usage makes it implicitly anchored to
1779 # the beginning of the line.
1781 if test -n "$1"; then
1782 echo -n "\\|$1" >> $falsepos_name
1788 set_sed_cmd "$input"
1790 rm -f "$falsepos_name"
1793 # Choose the input source...
1796 *) in='< "$input"' ;;
1799 set fnord # shifted out below
1801 # Decompress as needed...
1803 *.bz2) cmd='bunzip2' ;;
1804 *.gz) cmd='gunzip' ;;
1807 if test -n "$cmd"; then
1811 # Extract or otherwise munge...
1814 cmd="tar -xf - --to-command='echo \";/*begin \$TAR_FILENAME*/;\"; cat; echo \";/**/;\"; echo \";/*end \$TAR_FILENAME*/;\"'"
1822 ;/*end patchlet */;\
1823 ;/*begin patchlet */;
1828 cmd='sed "$sedpatch"'
1834 cmd="{ echo \";/*begin $input*/;\"; $cmd; echo \";/*end $input*/;\"; }"
1839 cmd="{ cat; cat > /dev/null; }"
1844 # Then run through the selected action.
1845 if test "$rm" != "rm -f" || test ! `echo "$sedmain" | wc -c` -lt 1024; then
1846 scriptname=`mktemp -t deblob-check-sedmain-XXXXXX`
1847 tempfiles="$tempfiles $scriptname"
1848 echo "$sedmain" > $scriptname
1849 cmd="sed -n -f \"$scriptname\""
1851 cmd='sed -n "$sedmain"'
1855 test $# != 1 || set "$@" "cat"
1857 shift # fnord goes out here
1862 if test -z "$pipe"; then
1878 # If no input given, use stdin.
1881 test -t 0 && echo reading from standard input >&2
1887 # The lines below commented out out #list: can be used to get a list
1888 # of matching inputs. ATM this is useless, so we just use a shell
1895 trap "status=$?; test -z \"$tempfiles\" || rm -f $tempfiles; (exit $status); exit" 0 1 2 15
1897 # Go through each of the input files in the command line.
1900 # If we print anything whatsoever (even a blank line) while
1901 # processing it, we've failed.
1902 if check "$file"; then
1906 #list: set fnord "$@" "$file"
1913 #list: exec test $# = 0