deblob-2.6.28

   1 #!/bin/sh
   2
   3 #    Copyright (C) 2008, 2009 Alexandre Oliva <lxoliva@fsfla.org>
   4 #    Copyright (C) 2008 Jeff Moe
   5 #
   6 #    This program is free software; you can redistribute it and/or modify
   7 #    it under the terms of the GNU General Public License as published by
   8 #    the Free Software Foundation; either version 2 of the License, or
   9 #    (at your option) any later version.
  10 #
  11 #    This program is distributed in the hope that it will be useful,
  12 #    but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 #    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 #    GNU General Public License for more details.
  15 #
  16 #    You should have received a copy of the GNU General Public License
  17 #    along with this program; if not, write to the Free Software
  18 #    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  19
  20
  21 # deblob - remove non-free blobs from the vanilla linux kernel
  22
  23 # http://www.fsfla.org/svn/fsfla/software/linux-libre
  24
  25
  26 # This script, suited for the kernel version named below, in kver,
  27 # attempts to remove only non-Free Software bits, without removing
  28 # Free Software that happens to be in the same file.
  29
  30 # Drivers that currently require non-Free firmware are retained, but
  31 # firmware included in GPLed sources is replaced with /*(DEBLOBBED)*/
  32 # if the deblob-check script, that knows how to do this, is present.
  33 # -lxoliva
  34
  35
  36 # See also:
  37 # http://wiki.debian.org/KernelFirmwareLicensing
  38 # svn://svn.debian.org/kernel/dists/trunk/linux-2.6/debian/patches/debian/dfsg/files-1
  39 # http://svn.gnewsense.svnhopper.net/gnewsense/builder/trunk/firmware/firmware-removed
  40 # http://svn.gnewsense.svnhopper.net/gnewsense/builder/trunk/gen-kernel
  41
  42 # Thanks to Brian Brazil @ gnewsense
  43
  44
  45 # For each kver release, start extra with an empty string, then count
  46 # from 1 if changes are needed that require rebuilding the tarball.
  47 kver=2.6.28 extra=++
  48
  49 fatal () {
  50   echo "$@"
  51   exit 1
  52 }
  53
  54 case $1 in
  55 --force) die () { echo ERROR: "$@": ignored >&2; }; forced=:; shift;;
  56 *) die () { fatal "$@"; }; forced=false;;
  57 esac
  58
  59 check=`echo $0 | sed 's,/[^/]*$,,'`/deblob-check
  60 if [ ! -f $check ] ; then
  61   if $forced; then
  62     die deblob-check script missing, will remove entire files
  63   else
  64     die deblob-check script missing
  65   fi
  66   have_check=false
  67 else
  68   have_check=:
  69 fi
  70
  71 announce () {
  72         echo
  73         echo "$@"
  74 }
  75
  76 clean_file () {
  77         #$1 = filename
  78         if test ! -f $1; then
  79                 die $1 does not exist, something is wrong
  80         fi
  81         rm $1
  82         echo $1: removed
  83 }
  84
  85 check_changed () {
  86         if test ! -f $1; then
  87                 die $1 does not exist, something is wrong
  88         elif cmp $1.deblob $1 > /dev/null; then
  89                 die $1 did not change, something is wrong
  90         fi
  91         mv $1.deblob $1
  92 }
  93
  94 clean_blob () {
  95         #$1 = filename
  96         if $have_check; then
  97             if test ! -f $1; then
  98                 die $1 does not exist, something is wrong
  99             fi
 100             name=$1
 101             set fnord "$@" -d
 102             shift 2
 103             $check "$@" -i linux-$kver $name > $name.deblob
 104             echo $name: removed blobs
 105             check_changed $name
 106         else
 107             clean_file $1
 108         fi
 109 }
 110
 111 dummy_blob () {
 112         #$1 = filename
 113         if test -f $1; then
 114             fatal $1 exists, something is wrong
 115         elif test ! -f firmware/Makefile; then
 116             fatal firmware/Makefile does not exist, something is wrong
 117         fi
 118
 119         clean_sed "s,`echo $1 | sed s,^firmware/,,`,\$(DEBLOBBED),g" \
 120           firmware/Makefile "dropped $1"
 121 }
 122
 123 clean_fw () {
 124         #$1 = firmware text input, $2 = firmware output
 125         if test ! -f $1; then
 126                 fatal $1 does not exist, something is wrong
 127         elif test -f $2; then
 128                 fatal $2 exists, something is wrong
 129         fi
 130         clean_blob $1 -s 4
 131         dummy_blob $2
 132 }
 133
 134 drop_fw_file () {
 135         #$1 = firmware text input, $2 = firmware output
 136         if test ! -f $1; then
 137                 fatal $1 does not exist, something is wrong
 138         elif test -f $2; then
 139                 fatal $2 exists, something is wrong
 140         fi
 141         clean_file $1
 142         dummy_blob $2
 143 }
 144
 145 clean_kconfig () {
 146         #$1 = filename $2 = things to remove
 147         case $1 in
 148         -f)
 149                 shift
 150                 ;;
 151         *)
 152                 if $have_check; then
 153                         return
 154                 fi
 155                 ;;
 156         esac
 157         sed "/^config \\($2\\)\$/{p;i\
 158         depends on NONFREE
 159 d;}" $1 > $1.deblob
 160         echo $1: marked config $2 as depending on NONFREE
 161         check_changed $1
 162 }
 163
 164 clean_mk () {
 165         #$1 = config $2 = Makefile name
 166         # We don't clean up Makefiles any more --lxoliva
 167         # sed -i "/\\($1\\)/d" $2
 168         # echo $2: removed $1 support
 169         # check_changed $2
 170         if sed -n "/\\($1\\)/p" $2 | grep . > /dev/null; then
 171             :
 172         else
 173             die $2 does not contain matches for $1
 174         fi
 175 }
 176
 177 clean_sed () {
 178         #$1 = sed-script $2 = file $3 = comment
 179         sed -e "$1" "$2" > "$2".deblob
 180         echo $2: ${3-applied sed script $1}
 181         check_changed "$2"
 182 }
 183
 184 reject_firmware () {
 185         #$1 = file
 186         clean_sed '
 187 s,request\(_ihex\|\)_firmware(,reject_firmware(,
 188 ' "$1" 'disabled non-Free firmware-loading machinery'
 189 }
 190
 191 # First, check that files that contain firmwares and their
 192 # corresponding sources are present.
 193
 194 for f in \
 195   drivers/char/ser_a2232fw.h \
 196     drivers/char/ser_a2232fw.ax \
 197   drivers/net/ixp2000/ixp2400_rx.ucode \
 198     drivers/net/ixp2000/ixp2400_rx.uc \
 199   drivers/net/ixp2000/ixp2400_tx.ucode \
 200     drivers/net/ixp2000/ixp2400_rx.uc \
 201   drivers/net/wan/wanxlfw.inc_shipped \
 202     drivers/net/wan/wanxlfw.S \
 203   drivers/net/wireless/atmel.c \
 204     drivers/net/wireless/atmel.c \
 205   drivers/scsi/53c700_d.h_shipped \
 206     drivers/scsi/53c700.scr \
 207   drivers/scsi/aic7xxx/aic79xx_seq.h_shipped \
 208     drivers/scsi/aic7xxx/aic79xx.seq \
 209   drivers/scsi/aic7xxx/aic7xxx_seq.h_shipped \
 210     drivers/scsi/aic7xxx/aic7xxx.seq \
 211   drivers/scsi/aic7xxx_old/aic7xxx_seq.c \
 212     drivers/scsi/aic7xxx_old/aic7xxx.seq \
 213   drivers/scsi/53c7xx_d.h_shipped \
 214     drivers/scsi/53c7xx.scr \
 215   drivers/scsi/sym53c8xx_2/sym_fw1.h \
 216     drivers/scsi/sym53c8xx_2/sym_fw1.h \
 217   drivers/scsi/sym53c8xx_2/sym_fw2.h \
 218     drivers/scsi/sym53c8xx_2/sym_fw2.h \
 219   firmware/dsp56k/bootstrap.bin.ihex \
 220     firmware/dsp56k/bootstrap.asm \
 221   firmware/keyspan_pda/keyspan_pda.HEX \
 222     firmware/keyspan_pda/keyspan_pda.S \
 223   firmware/keyspan_pda/xircom_pgs.HEX \
 224     firmware/keyspan_pda/xircom_pgs.S \
 225   sound/pci/cs46xx/imgs/cwcdma.h \
 226     sound/pci/cs46xx/imgs/cwcdma.asp \
 227 ; do
 228   if test ! $f; then
 229     die $f is not present, something is amiss
 230   fi
 231 done
 232
 233 # Identify the tarball.
 234 clean_sed "
 235 s,^EXTRAVERSION.*,&-libre$extra,
 236 " Makefile 'added -libre to EXTRAVERSION'
 237
 238 # Add reject_firmware and maybe_reject_firmware
 239 clean_sed '
 240 $i\
 241 #ifndef _LINUX_LIBRE_FIRMWARE_H\
 242 #define _LINUX_LIBRE_FIRMWARE_H\
 243 \
 244 #define NONFREE_FIRMWARE "/*(DEBLOBBED)*/"\
 245 \
 246 static inline int\
 247 report_missing_free_firmware(const char *name, const char *what)\
 248 {\
 249         printk(KERN_ERR "%s: Missing Free %s\\n", name,\
 250                what ? what : "firmware");\
 251         return -EINVAL;\
 252 }\
 253 static inline int\
 254 reject_firmware(const struct firmware **fw,
 255                 const char *name, struct device *device)\
 256 {\
 257         struct firmware *xfw = NULL;\
 258         int retval;\
 259         report_missing_free_firmware(device->name, NULL);\
 260         retval = request_firmware(&xfw, NONFREE_FIRMWARE, device);\
 261         if (!retval)\
 262                 release_firmware(xfw);\
 263         return -EINVAL;\
 264 }\
 265 static inline int\
 266 maybe_reject_firmware(const struct firmware **fw,\
 267                       const char *name, struct device *device)\
 268 {\
 269         if (strstr (name, NONFREE_FIRMWARE))\
 270                 return reject_firmware(fw, name, device);\
 271         else\
 272                 return request_firmware(fw, name, device);\
 273 }\
 274 static inline void\
 275 discard_rejected_firmware(const struct firmware *fw, void *context)\
 276 {\
 277         release_firmware(fw);\
 278 }\
 279 static inline int\
 280 reject_firmware_nowait(struct module *module, int uevent,\
 281                        const char *name, struct device *device,\
 282                        void *context,\
 283                        void (*cont)(const struct firmware *fw,\
 284                                     void *context))\
 285 {\
 286         int retval;\
 287         report_missing_free_firmware(device->name, NULL);\
 288         retval = request_firmware_nowait(module, uevent, NONFREE_FIRMWARE,\
 289                                          device, NULL,\
 290                                          discard_rejected_firmware);\
 291         if (retval)\
 292                 return retval;\
 293         return -EINVAL;\
 294 }\
 295 static inline int\
 296 maybe_reject_firmware_nowait(struct module *module, int uevent,\
 297                              const char *name, struct device *device,\
 298                              void *context,\
 299                              void (*cont)(const struct firmware *fw,\
 300                                           void *context))\
 301 {\
 302         if (strstr (name, NONFREE_FIRMWARE))\
 303                 return reject_firmware_nowait(module, uevent, name,\
 304                                               device, context, cont);\
 305         else\
 306                 return request_firmware_nowait(module, uevent, name,\
 307                                                device, context, cont);\
 308 }\
 309 \
 310 #endif /* _LINUX_LIBRE_FIRMWARE_H */\
 311 ' include/linux/firmware.h 'added non-Free firmware notification support'
 312
 313 ########################
 314 # Removed Arch Drivers #
 315 ########################
 316
 317 # x86
 318
 319 announce MICROCODE_AMD - "AMD microcode patch loading support"
 320 reject_firmware arch/x86/kernel/microcode_amd.c
 321 clean_blob arch/x86/kernel/microcode_amd.c
 322 clean_kconfig arch/x86/Kconfig 'MICROCODE_AMD'
 323 clean_mk CONFIG_MICROCODE_AMD arch/x86/kernel/Makefile
 324
 325 announce MICROCODE_INTEL - "Intel microcode patch loading support"
 326 reject_firmware arch/x86/kernel/microcode_intel.c
 327 clean_blob arch/x86/kernel/microcode_intel.c
 328 clean_kconfig arch/x86/Kconfig 'MICROCODE_INTEL'
 329 clean_mk CONFIG_MICROCODE_INTEL arch/x86/kernel/Makefile
 330
 331 # arm
 332
 333 announce IXP4XX_NPE - "IXP4xx Network Processor Engine support"
 334 reject_firmware arch/arm/mach-ixp4xx/ixp4xx_npe.c
 335 clean_blob Documentation/arm/IXP4xx
 336
 337 announce ARCH_NETX - "Hilscher NetX based"
 338 clean_sed '
 339 s,\([" ]\)request_firmware(,\1reject_firmware(,
 340 ' arch/arm/mach-netx/xc.c 'disabled non-Free firmware-loading machinery'
 341
 342
 343 #######################
 344 # Removed ATM Drivers #
 345 #######################
 346
 347 announce ATM_AMBASSADOR - "Madge Ambassador, Collage PCI 155 Server"
 348 reject_firmware drivers/atm/ambassador.c
 349 clean_blob drivers/atm/ambassador.c
 350 clean_fw firmware/atmsar11.HEX firmware/atmsar11.fw
 351 clean_kconfig drivers/atm/Kconfig 'ATM_AMBASSADOR'
 352 clean_mk CONFIG_ATM_AMBASSADOR drivers/atm/Makefile
 353
 354 announce ATM_FORE200E - "FORE Systems 200E-series"
 355 reject_firmware drivers/atm/fore200e.c
 356 clean_blob drivers/atm/fore200e.c
 357 clean_blob Documentation/networking/fore200e.txt
 358 clean_kconfig drivers/atm/Kconfig 'ATM_FORE200E'
 359 clean_mk CONFIG_ATM_FORE200E drivers/atm/Makefile
 360
 361
 362 ########################
 363 # Removed char Drivers #
 364 ########################
 365
 366 announce COMPUTONE - "Computone IntelliPort Plus serial"
 367 drop_fw_file firmware/intelliport2.bin.ihex firmware/intelliport2.bin
 368 reject_firmware drivers/char/ip2/ip2main.c
 369 clean_blob drivers/char/ip2/ip2main.c
 370 clean_kconfig drivers/char/Kconfig 'COMPUTONE'
 371 clean_mk CONFIG_COMPUTONE drivers/char/Makefile
 372
 373 announce CYCLADES - "Cyclades async mux support"
 374 reject_firmware drivers/char/cyclades.c
 375 clean_blob drivers/char/cyclades.c
 376 clean_kconfig drivers/char/Kconfig 'CYCLADES'
 377 clean_mk CONFIG_CYCLADES drivers/char/Makefile
 378
 379 announce ISI - "Multi-Tech multiport card support (EXPERIMENTAL)"
 380 reject_firmware drivers/char/isicom.c
 381 clean_blob drivers/char/isicom.c
 382 clean_kconfig drivers/char/Kconfig 'ISI'
 383 clean_mk CONFIG_ISI drivers/char/Makefile
 384
 385 announce MOXA_INTELLIO - "Moxa Intellio support"
 386 reject_firmware drivers/char/moxa.c
 387 clean_blob drivers/char/moxa.c
 388 clean_kconfig drivers/char/Kconfig 'MOXA_INTELLIO'
 389 clean_mk CONFIG_MOXA_INTELLIO drivers/char/Makefile
 390
 391 # gpu drm
 392
 393 announce DRM_MGA - "Matrox g200/g400"
 394 clean_blob drivers/gpu/drm/mga/mga_ucode.h
 395 clean_blob drivers/gpu/drm/mga/mga_warp.c
 396 clean_kconfig drivers/gpu/drm/Kconfig 'DRM_MGA'
 397 clean_mk CONFIG_DRM_MGA drivers/gpu/drm/Makefile
 398
 399 announce DRM_R128 - "ATI Rage 128"
 400 clean_sed '
 401 /^static int r128_do_init_cce([^;]*$/,/^}$/{
 402   /^    r128_cce_load_microcode(dev_priv);$/{
 403     i\
 404         DRM_ERROR("Missing Free microcode!\\n");\
 405         dev->dev_private = (void *)dev_priv;\
 406         r128_do_cleanup_cce(dev);\
 407         return -EINVAL;
 408   }
 409 }' drivers/gpu/drm/r128/r128_cce.c 'report missing Free microcode'
 410 clean_blob drivers/gpu/drm/r128/r128_cce.c
 411 clean_kconfig drivers/gpu/drm/Kconfig 'DRM_R128'
 412 clean_mk CONFIG_DRM_R128 drivers/gpu/drm/Makefile
 413
 414 announce DRM_RADEON - "ATI Radeon"
 415 clean_sed '
 416 /^static int radeon_do_init_cce([^;]*$/,/^}$/{
 417   /^    radeon_cp_load_microcode(dev_priv);$/{
 418     i\
 419         DRM_ERROR("Missing Free microcode!\\n");\
 420         radeon_do_cleanup_cp(dev);\
 421         return -EINVAL;
 422   }
 423 }
 424 /^static int radeon_do_resume_cp([^;]*$/,/^}$/{
 425   /^    radeon_cp_load_microcode(dev_priv);$/{
 426     i\
 427         DRM_ERROR("Missing Free microcode!\\n");\
 428         return -EINVAL;
 429   }
 430 }' drivers/gpu/drm/radeon/radeon_cp.c 'report missing Free microcode'
 431 clean_blob drivers/gpu/drm/radeon/radeon_microcode.h
 432 clean_kconfig drivers/gpu/drm/Kconfig 'DRM_RADEON'
 433 clean_mk CONFIG_DRM_RADEON drivers/gpu/drm/Makefile
 434
 435
 436 #########################
 437 # Removed Media Drivers #
 438 #########################
 439
 440 # media/tuner
 441
 442 announce MEDIA_TUNER_XC2028 - "XCeive xc2028/xc3028 tuners"
 443 clean_sed '
 444 s,\(#define XC\(2028\|3028L\)_DEFAULT_FIRMWARE \)"[^"]*",\1NONFREE_FIRMWARE,
 445 ' drivers/media/common/tuners/tuner-xc2028.h 'report missing non-Free firmware'
 446 clean_blob drivers/media/common/tuners/tuner-xc2028.h
 447 clean_sed '
 448 s,request_firmware(,maybe_reject_firmware(,
 449 ' drivers/media/common/tuners/tuner-xc2028.c \
 450   'disabled non-Free firmware loading machinery'
 451 clean_kconfig drivers/media/common/tuners/Kconfig 'MEDIA_TUNER_XC2028'
 452 clean_mk CONFIG_MEDIA_TUNER_XC2028 drivers/media/common/tuners/Makefile
 453
 454 announce MEDIA_TUNER_XC5000 - "Xceive XC5000 silicon tuner"
 455 reject_firmware drivers/media/common/tuners/xc5000.c
 456 clean_blob drivers/media/common/tuners/xc5000.c
 457 clean_kconfig drivers/media/common/tuners/Kconfig 'MEDIA_TUNER_XC5000'
 458 clean_mk CONFIG_MEDIA_TUNER_XC5000 drivers/media/common/tuners/Makefile
 459
 460 announce DVB - "non-Free firmware scripts and documentation"
 461 clean_blob Documentation/dvb/get_dvb_firmware
 462 clean_blob Documentation/dvb/avermedia.txt
 463 clean_blob Documentation/dvb/opera-firmware.txt
 464 clean_blob Documentation/dvb/ttusb-dec.txt
 465
 466 announce DVB_USB_AF9005 - "Afatech AF9005 DVB-T USB1.1"
 467 clean_file drivers/media/dvb/dvb-usb/af9005-script.h
 468 clean_sed '
 469 s,^     deb_info("load init script\\n");$,      {\n             err("Missing Free init script\\n");\n           return scriptlen = ret = -EINVAL;\n             ,;
 470 ' drivers/media/dvb/dvb-usb/af9005-fe.c 'report missing Free init script'
 471 clean_blob drivers/media/dvb/dvb-usb/af9005-fe.c
 472 clean_kconfig drivers/media/dvb/dvb-usb/Kconfig 'DVB_USB_AF9005'
 473 clean_mk CONFIG_DVB_USB_AF9005 drivers/media/dvb/dvb-usb/Makefile
 474
 475 announce DVB_B2C2_FLEXCOP - "Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters"
 476 reject_firmware drivers/media/dvb/b2c2/flexcop-fe-tuner.c
 477
 478 announce DVB_BT8XX - "BT8xx based PCI cards"
 479 reject_firmware drivers/media/dvb/bt8xx/dvb-bt8xx.c
 480
 481 # dvb/frontends
 482
 483 announce DVB_SP8870 - "Spase sp8870"
 484 clean_sed '
 485 s,SP8870_DEFAULT_FIRMWARE,NONFREE_FIRMWARE,g
 486 ' drivers/media/dvb/frontends/sp8870.c 'disable non-Free firmware'
 487 clean_blob drivers/media/dvb/frontends/sp8870.c
 488 clean_kconfig drivers/media/dvb/frontends 'DVB_SP8870'
 489 clean_mk CONFIG_DVB_SP8870 drivers/media/dvb/frontends/Makefile
 490
 491 announce DVB_TDA1004X - "Philips TDA10045H/TDA10046H"
 492 clean_sed '
 493 s,TDA1004[56]_DEFAULT_FIRMWARE,NONFREE_FIRMWARE,g
 494 ' drivers/media/dvb/frontends/tda1004x.c 'disable non-Free firmware'
 495 clean_blob drivers/media/dvb/frontends/tda1004x.c
 496 clean_kconfig drivers/media/dvb/frontends 'DVB_TDA1004X'
 497 clean_mk CONFIG_DVB_TDA1004X drivers/media/dvb/frontends/Makefile
 498
 499 # dvb/ttpci
 500
 501 announce DVB_AV7110 - "AV7110 cards"
 502 # The bootcode is actually Free Software under GPLv2, but since it's
 503 # being distributed without source code, we're taking it out for now.
 504 clean_sed '
 505 s,^     \/\* boot \*\/$,        printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): Missing Free bootcode\\n");\n     return -EINVAL;\n\n&,
 506 ' drivers/media/dvb/ttpci/av7110_hw.c 'report missing Free bootcode'
 507 clean_sed '
 508 s,mwdebi(.*bootcode.*$,/* & */,
 509 ' drivers/media/dvb/ttpci/av7110_hw.c 'adjust bootcode loader'
 510 clean_blob drivers/media/dvb/ttpci/av7110_hw.c
 511 clean_sed '
 512 /^static int get_firmware([^;]*$/,/^}$/{
 513   s, request_firmware(, reject_firmware(,
 514 }' drivers/media/dvb/ttpci/av7110.c 'report missing Free firwmare'
 515 clean_sed '
 516 /^static int alps_tdlb7_request_firmware([^;]*$/,/^}$/{
 517   s, request_firmware(, maybe_reject_firmware(,
 518 }' drivers/media/dvb/ttpci/av7110.c 'accept Free firmware'
 519 clean_blob drivers/media/dvb/ttpci/av7110.c
 520 clean_kconfig drivers/media/dvb/ttpci/Kconfig 'DVB_AV7110'
 521 clean_mk CONFIG_DVB_AV7110 drivers/media/dvb/ttpci/Makefile
 522
 523 announce DVB_BUDGET - "Budget cards"
 524 clean_sed '
 525 /^static int alps_tdhd1_204_request_firmware([^;]*$/,/^}$/{
 526   s, request_firmware(, maybe_reject_firmware(,
 527 }' drivers/media/dvb/ttpci/budget.c 'report missing Free firmware'
 528
 529 announce DVB_BUDGET_AV - "Budget cards with analog video inputs"
 530 clean_sed '
 531 /^static int philips_tu1216_request_firmware([^;]*$/,/^}$/{
 532   s, request_firmware(, maybe_reject_firmware(,
 533 }' drivers/media/dvb/ttpci/budget-av.c \
 534   'report missing Free firmware, accept Free firmware'
 535
 536 announce DVB_BUDGET_CI - "Budget cards with onboard CI connector"
 537 clean_sed '
 538 /^static int philips_tdm1316l_request_firmware([^;]*$/,/^}$/{
 539   s, request_firmware(, maybe_reject_firmware(,
 540 }' drivers/media/dvb/ttpci/budget-ci.c \
 541   'report missing Free firmware, accept Free firmware'
 542
 543 # dvb/ttusb-budget
 544
 545 announce DVB_TTUSB_BUDGET - "Technotrend/Hauppauge Nova-USB devices"
 546 drop_fw_file firmware/ttusb-budget/dspbootcode.bin.ihex firmware/ttusb-budget/dspbootcode.bin
 547 clean_sed '
 548 /^static int philips_tdm1316l_request_firmware([^;]*$/,/^}$/{
 549   s, request_firmware(, maybe_reject_firmware(,
 550 }' drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c \
 551   'report missing Free firmware, accept Free firmware'
 552 reject_firmware drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
 553 clean_blob drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
 554 clean_kconfig drivers/media/dvb/ttusb-budget/Kconfig 'DVB_TTUSB_BUDGET'
 555 clean_mk CONFIG_DVB_TTUSB_BUDGET drivers/media/dvb/ttusb-budget/Makefile
 556
 557 # video
 558
 559 announce VIDEO_CPIA2 - "CPiA2 Video For Linux"
 560 clean_fw firmware/cpia2/stv0672_vp4.bin.ihex firmware/cpia2/stv0672_vp4.bin
 561 reject_firmware drivers/media/video/cpia2/cpia2_core.c
 562 clean_blob drivers/media/video/cpia2/cpia2_core.c
 563 clean_kconfig drivers/media/video/cpia2/Kconfig 'VIDEO_CPIA2'
 564 clean_mk CONFIG_VIDEO_CPIA2 drivers/media/video/cpia2/Makefile
 565
 566 announce USB_DABUSB - "DABUSB driver"
 567 clean_fw firmware/dabusb/bitstream.bin.ihex firmware/dabusb/bitstream.bin
 568 clean_fw firmware/dabusb/firmware.HEX firmware/dabusb/firmware.fw
 569 reject_firmware drivers/media/video/dabusb.c
 570 clean_blob drivers/media/video/dabusb.c
 571 clean_kconfig drivers/media/Kconfig 'USB_DABUSB'
 572 clean_mk CONFIG_USB_DABUSB drivers/media/video/Makefile
 573
 574 # video/usbvideo
 575
 576 announce USB_VICAM - "USB 3com HomeConnect, AKA vicam"
 577 drop_fw_file firmware/vicam/firmware.H16 firmware/vicam/firmware.fw
 578 reject_firmware drivers/media/video/usbvideo/vicam.c
 579 clean_blob drivers/media/video/usbvideo/vicam.c
 580 clean_kconfig drivers/media/video/usbvideo/Kconfig 'USB_VICAM'
 581 clean_mk CONFIG_USB_VICAM drivers/media/video/usbvideo/Makefile
 582
 583
 584 #######################
 585 # Removed net Drivers #
 586 #######################
 587
 588 announce ACENIC - "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit"
 589 clean_blob drivers/net/acenic_firmware.h
 590 clean_sed '
 591 s,      \(ace_load_firmware[^;]*\),     if ((ecode = \1)) goto init_error,
 592 ' drivers/net/acenic.c 'check for error in firmware loading'
 593 clean_sed '
 594 /^static int __devinit ace_load_firmware([^;]*$/,/^}$/{
 595   /^}$/i\
 596 }\
 597         printk(KERN_ERR "%s: Missing Free firwmare\\n", ap->name);\
 598         return -EINVAL;
 599 }' drivers/net/acenic.c 'report missing Free firmware'
 600 clean_blob drivers/net/acenic.c
 601 clean_kconfig drivers/net/Kconfig 'ACENIC'
 602 clean_mk CONFIG_ACENIC drivers/net/Makefile
 603
 604 announce ADAPTEC_STARFIRE - "Adaptec Starfire/DuraLAN support"
 605 # This file requires prior acceptance of the GPL before you can even
 606 # run the code in it.  It's not clear whether this is a further
 607 # requirement that would make the distribution incompatible with the
 608 # GPL, but since nothing remains after we remove the blob, it's
 609 # irrelevant whether the explicit acceptance would be a problem.
 610 clean_file drivers/net/starfire_firmware.h
 611 clean_file drivers/net/starfire_firmware.pl
 612 clean_sed '
 613 /Load Rx\/Tx firmware/i\
 614         printk (KERN_ERR "%s: Missing Free firmware\\n", dev->name);\
 615         return -EINVAL;
 616 ' drivers/net/starfire.c 'report missing Free firmware'
 617 clean_blob drivers/net/starfire.c
 618 clean_kconfig drivers/net/Kconfig 'ADAPTEC_STARFIRE'
 619 clean_mk CONFIG_ADAPTEC_STARFIRE drivers/net/Makefile
 620
 621 announce BNX2 - "Broadcom NetXtremeII"
 622 clean_file drivers/net/bnx2_fw.h
 623 clean_file drivers/net/bnx2_fw2.h
 624 clean_sed '
 625 / bnx2_init_cpus(/i\
 626         printk (KERN_ERR "%s: Missing Free firmware\\n", bp->dev->name);\
 627         return -EINVAL;\
 628 #define bnx2_init_cpus(bp) (-EINVAL)
 629 ' drivers/net/bnx2.c 'report missing Free firmware'
 630 clean_blob drivers/net/bnx2.c
 631 clean_kconfig drivers/net/Kconfig 'BNX2'
 632 clean_mk CONFIG_BNX2 drivers/net/Makefile
 633
 634 announce BNX2X - "Broadcom NetXtremeII 10Gb support"
 635 clean_blob drivers/net/bnx2x_init_values.h
 636 clean_blob drivers/net/bnx2x_init.h
 637 clean_sed '
 638 /^#include "bnx2x_init\.h"/,/^$/{
 639   /^$/i\
 640 #define bnx2x_init_block(bp, start, end) \\\
 641   return printk(KERN_ERR PFX "%s: Missing Free firmware\\n", bp->dev->name),\
 642          -EINVAL;
 643 }' drivers/net/bnx2x_main.c 'report missing Free firmware'
 644 clean_kconfig drivers/net/Kconfig 'BNX2X'
 645 clean_mk CONFIG_BNX2X drivers/net/Makefile
 646
 647 announce CASSINI - "Sun Cassini"
 648 drop_fw_file firmware/sun/cassini.bin.ihex firmware/sun/cassini.bin
 649 reject_firmware drivers/net/cassini.c
 650 clean_blob drivers/net/cassini.c
 651 clean_kconfig drivers/net/Kconfig 'CASSINI'
 652 clean_mk CONFIG_CASSINI drivers/net/Makefile
 653
 654 announce CHELSIO_T3 - "Chelsio AEL 2005 support"
 655 clean_sed '
 656 /^static int ael2005_setup_\(sr\|twinax\)_edc([^;]*$/,/^}$/{
 657   /for.*ARRAY_SIZE(\(sr\|twinax\)_edc)/i\
 658 }\
 659         CH_ERR(phy->adapter, "Missing Free firwmare\\n");\
 660         err = -EINVAL;
 661 }' drivers/net/cxgb3/ael1002.c 'report missing Free firmware'
 662 clean_blob drivers/net/cxgb3/ael1002.c
 663 clean_kconfig drivers/net/Kconfig 'CHELSIO_T3'
 664 clean_mk CONFIG_CHELSIO_T3 drivers/net/cxgb3/Makefile
 665
 666 announce E100 - "Intel PRO/100+"
 667 clean_sed '
 668 /^static void e100_setup_ucode([^;]*$/,/^}$/{
 669   /^    } ucode_opts\[\] = {$/,/^       }[,;]/ {
 670     s,D[^,]*_RCVBUNDLE_UCODE,/*DEBLOBBED*/{0},g;
 671     s,D[^,]*_CPUSAVER_\(TIMER\|BUNDLE\|MIN_SIZE\)_DWORD,/*DEBLOBBED*/0,g;
 672   }
 673   /^    for ([^;]*ucode_opts[^{]*) {$/,/^       }$/ {
 674     /^  }$/ i\
 675         }\
 676                 DPRINTK(DRV, ERR, "Missing Free firmware\\n");\
 677                 /* ??? We should error out somehow.  */\
 678                 goto noloaducode;
 679   }
 680 }
 681 ' drivers/net/e100.c 'report missing Free firmware for some variants'
 682 clean_blob drivers/net/e100.c
 683 clean_kconfig drivers/net/Kconfig 'E100'
 684 clean_mk CONFIG_E100 drivers/net/Makefile
 685
 686 announce MYRI_SBUS - "MyriCOM Gigabit Ethernet"
 687 clean_file drivers/net/myri_code.h
 688 clean_sed '
 689 /myri_load_lanai.*;/{
 690   i\
 691         printk(KERN_ERR "Missing Free firmware\\n");\
 692         goto err_free_irq;
 693 }' drivers/net/myri_sbus.c 'report missing Free firmware'
 694 clean_blob drivers/net/myri_sbus.c
 695 clean_kconfig drivers/net/Kconfig 'MYRI_SBUS'
 696 clean_mk CONFIG_MYRI_SBUS drivers/net/Makefile
 697
 698 announce TEHUTI - "Tehuti Networks 10G Ethernet"
 699 clean_blob drivers/net/tehuti_fw.h
 700 clean_sed '
 701 /bdx_tx_push_desc_safe.*s_firmLoad.*/{
 702   i\
 703                 ERR("%s: Missing Free firmware\\n", priv->ndev->name);\
 704                 RET(-EINVAL);
 705 }' drivers/net/tehuti.c 'report missing Free firmware'
 706 clean_blob drivers/net/tehuti.c
 707 clean_kconfig drivers/net/Kconfig 'TEHUTI'
 708 clean_mk CONFIG_TEHUTI drivers/net/Makefile
 709
 710 announce TIGON3 - "Broadcom Tigon3"
 711 clean_sed '
 712 s,\&tg3\(Tso5\?\)\?Fw\(Text\|Rodata\|Data\)\[0\],NULL,;
 713 /^static int tg3_load_firmware_cpu([^;]*$/,/^}/{
 714   /^    err = 0;/{
 715     i\
 716         printk(KERN_ERR PFX "Missing Free firmware for %s, hoping it works anyway\\n",\
 717                tp->dev->name);
 718   }
 719 }' drivers/net/tg3.c 'report missing Free firmware, proceed without it'
 720 clean_blob drivers/net/tg3.c
 721 clean_kconfig drivers/net/Kconfig 'TIGON3'
 722 clean_mk CONFIG_TIGON3 drivers/net/Makefile
 723
 724 announce TYPHOON - "3cr990 series Typhoon"
 725 clean_blob drivers/net/typhoon-firmware.h
 726 clean_sed '
 727 /^typhoon_download_firmware([^;]*$/,/^}/{
 728   /typhoon_firmware_image/{
 729     i\
 730         printk(KERN_ERR "%s: Missing Free firmware\\n", tp->name);\
 731         err = -EINVAL;\
 732         goto err_out;
 733     d;
 734   }
 735 }' drivers/net/typhoon.c 'report missing Free firmware'
 736 clean_kconfig drivers/net/Kconfig 'TYPHOON'
 737 clean_mk CONFIG_TYPHOON drivers/net/Makefile
 738
 739 # appletalk
 740
 741 announce COPS - "COPS LocalTalk PC"
 742 clean_sed '
 743 /sizeof(\(ff\|lt\)drv_code)/{
 744   i\
 745                 printk(KERN_INFO "%s: Missing Free firmware.\\n", dev->name);\
 746                 return;
 747 }
 748 /\(ff\|lt\)drv_code/d;
 749 ' drivers/net/appletalk/cops.c 'report missing Free firmware'
 750 clean_blob drivers/net/appletalk/cops.c
 751 clean_file drivers/net/appletalk/cops_ffdrv.h
 752 clean_file drivers/net/appletalk/cops_ltdrv.h
 753 clean_kconfig drivers/net/appletalk/Kconfig 'COPS'
 754 clean_mk CONFIG_COPS drivers/net/appletalk/Makefile
 755
 756 # hamradio
 757
 758 announce YAM - "YAM driver for AX.25"
 759 clean_file drivers/net/hamradio/yam1200.h
 760 clean_file drivers/net/hamradio/yam9600.h
 761 clean_sed '
 762 /add_mcs(bits_\(12\|96\)00, bitrate)/{
 763   i\
 764                 printk(KERN_ERR "yam: Missing Free firmware\\n");
 765   s:add_mcs(bits_\(12\|96\)00, bitrate):NULL:
 766 }' drivers/net/hamradio/yam.c 'report missing Free firmware'
 767 clean_blob drivers/net/hamradio/yam.c
 768 clean_kconfig drivers/net/hamradio/Kconfig 'YAM'
 769 clean_mk CONFIG_YAM drivers/net/hamradio/Makefile
 770
 771 # pcmcia
 772
 773 announce PCMCIA_SMC91C92 - "SMC 91Cxx PCMCIA"
 774 clean_blob drivers/net/pcmcia/ositech.h
 775 clean_sed '
 776 /^\(static int \)\?osi_setup([^;]*$/,/^}$/{
 777   s/^\(.*\)[/][*] Download.*firmware [*][/]/\1printk(KERN_ERR "%s: Missing Free firmware\\n", dev->name);\n\1rc = -EINVAL;\n\1goto free_cfg_mem;\n&/
 778 }' drivers/net/pcmcia/smc91c92_cs.c 'report missing Free firmware'
 779 clean_sed '
 780 /^\(static int \)\?smc91c92_resume([^;]*$/,/^}$/{
 781   s/^\(.*\)[/][*] Download.*firmware [*][/]/\1printk(KERN_ERR "%s: Missing Free firmware\\n", dev->name);\n\1return -EINVAL;\n&/
 782 }' drivers/net/pcmcia/smc91c92_cs.c 'report another missing Free firmware'
 783 clean_kconfig drivers/net/pcmcia/Kconfig 'PCMCIA_SMC91C92'
 784 clean_mk CONFIG_PCMCIA_SMC91C92 drivers/net/pcmcia/Makefile
 785
 786
 787 # tokenring
 788
 789 announce 3C359 - "3Com 3C359 Token Link Velocity XL adapter"
 790 clean_file drivers/net/tokenring/3c359_microcode.h
 791 clean_sed '
 792 /^\(static int \)\?xl_hw_reset([^;]*$/,/^}/{
 793   /printk.*Uploading Microcode/i\
 794                 printk(KERN_ERR "%s: Missing Free firmware\\n", dev->name);\
 795                 return -EINVAL;
 796 }' drivers/net/tokenring/3c359.c 'report missing Free firmware'
 797 clean_blob drivers/net/tokenring/3c359.c
 798 clean_kconfig drivers/net/tokenring/Kconfig '3C359'
 799 clean_mk CONFIG_3C359 drivers/net/tokenring/Makefile
 800
 801 announce SMCTR - "SMC ISA/MCA adapter"
 802 drop_fw_file firmware/tr_smctr.bin.ihex firmware/tr_smctr.bin
 803 reject_firmware drivers/net/tokenring/smctr.c
 804 clean_blob drivers/net/tokenring/smctr.c
 805 clean_kconfig drivers/net/tokenring/Kconfig 'SMCTR'
 806 clean_mk CONFIG_SMCTR drivers/net/tokenring/Makefile
 807
 808 # usb
 809
 810 announce USB_KAWETH - "USB KLSI KL5USB101-based ethernet device support"
 811 drop_fw_file firmware/kaweth/new_code.bin.ihex firmware/kaweth/new_code.bin
 812 drop_fw_file firmware/kaweth/new_code_fix.bin.ihex firmware/kaweth/new_code_fix.bin
 813 drop_fw_file firmware/kaweth/trigger_code.bin.ihex firmware/kaweth/trigger_code.bin
 814 drop_fw_file firmware/kaweth/trigger_code_fix.bin.ihex firmware/kaweth/trigger_code_fix.bin
 815 reject_firmware drivers/net/usb/kaweth.c
 816 clean_blob drivers/net/usb/kaweth.c
 817 clean_kconfig drivers/net/usb/Kconfig 'USB_KAWETH'
 818 clean_mk CONFIG_USB_KAWETH drivers/net/usb/Makefile
 819
 820 # wireless
 821
 822 announce HERMES - "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
 823 reject_firmware drivers/net/wireless/orinoco.c
 824 clean_blob drivers/net/wireless/orinoco.c
 825 clean_kconfig drivers/net/wireless/Kconfig 'HERMES'
 826 clean_mk CONFIG_HERMES drivers/net/wireless/Makefile
 827
 828 # bluetooth
 829
 830 announce BT_HCIBCM203X - "HCI BCM203x USB driver"
 831 reject_firmware drivers/bluetooth/bcm203x.c
 832 clean_blob drivers/bluetooth/bcm203x.c
 833 clean_kconfig drivers/bluetooth/Kconfig 'BT_HCIBCM203X'
 834 clean_mk CONFIG_BT_HCIBCM203X drivers/bluetooth/Makefile
 835
 836 announce BT_HCIBFUSB - "HCI BlueFRITZ! USB driver"
 837 reject_firmware drivers/bluetooth/bfusb.c
 838 clean_blob drivers/bluetooth/bfusb.c
 839 clean_kconfig drivers/bluetooth/Kconfig 'BT_HCIBFUSB'
 840 clean_mk CONFIG_BT_HCIBFUSB drivers/bluetooth/Makefile
 841
 842 announce BT_HCIBT3C - "HCI BT3C (PC Card) driver"
 843 reject_firmware drivers/bluetooth/bt3c_cs.c
 844 clean_blob drivers/bluetooth/bt3c_cs.c
 845 clean_kconfig drivers/bluetooth/Kconfig 'BT_HCIBT3C'
 846 clean_mk CONFIG_BT_HCIBT3C drivers/bluetooth/Makefile
 847
 848
 849 ########################
 850 # Removed SCSI Drivers #
 851 ########################
 852
 853 announce SCSI_QLOGICPTI - "PTI Qlogic, ISP Driver"
 854 clean_file drivers/scsi/qlogicpti_asm.c
 855 clean_sed '
 856 /^static int __devinit qlogicpti_load_firmware([^;]*$/,/^}$/{
 857   /[&]sbus_risc_code01/{
 858     i\
 859         printk(KERN_ERR "qlogicpti%d: Missing Free firmware\\n", qpti->qpti_id);\
 860         return -EINVAL;
 861   }
 862   s,[&]sbus_risc_code01\[0\],NULL,
 863   s,sbus_risc_code_length01,0,
 864 }' drivers/scsi/qlogicpti.c 'report missing Free firmware'
 865 clean_blob drivers/scsi/qlogicpti.c
 866 clean_kconfig drivers/scsi/Kconfig 'SCSI_QLOGICPTI'
 867 clean_mk CONFIG_SCSI_QLOGICPTI drivers/scsi/Makefile
 868
 869 announce SCSI_ADVANSYS - "AdvanSys SCSI"
 870 clean_sed '
 871 /ASC_DBG.*_asc_mcode_chksum);/d;
 872 /^\(static ASC_CNT \)\?AscLoadMicroCode([^;]*$/,/^}$/{
 873   /^}$/{
 874     p;
 875     i\
 876 #define AscLoadMicroCode(x1,x2,x3,x4) ((x1),(x2),(x3),(x4),printk(KERN_ERR "advansys: Missing Free firmware\\n"), -1)
 877     d;
 878   }
 879 }
 880 /^\(static int \)\?AdvLoadMicrocode([^;]*$/,/^}$/{
 881   /^}$/{
 882     p;
 883     i\
 884 #define AdvLoadMicrocode(x1,x2,x3,x4,x5) ((x1),(x2),(x3),(x4),(x5),printk(KERN_ERR "advansys: Missing Free firmware\\n"), ASC_IERR_MCODE_CHKSUM)
 885     d;
 886   }
 887 }
 888 s/\([   (]\)_\(asc_mcode\|adv_asc3\(550\|8C\(08\|16\)00\)\)_buf,/\1NULL,/;
 889 s/\([   ]\)_\(asc_mcode\|adv_asc3\(550\|8C\(08\|16\)00\)\)_size\([,)]\)/\1(unsigned short)0\5/;
 890 s/\([   ]\)_\(asc_mcode\|adv_asc3\(550\|8C\(08\|16\)00\)\)_chksum\([,)]\)/\1(ADV_DCNT)0\5/;
 891 ' drivers/scsi/advansys.c 'report missing Free firmware'
 892 clean_blob drivers/scsi/advansys.c
 893 clean_kconfig drivers/scsi/Kconfig 'SCSI_ADVANSYS'
 894 clean_mk CONFIG_SCSI_ADVANSYS drivers/scsi/Makefile
 895
 896 announce SCSI_QLOGIC_1280 - "Qlogic QLA 1240/1x80/1x160 SCSI"
 897 clean_blob drivers/scsi/ql1280_fw.h
 898 clean_blob drivers/scsi/ql1040_fw.h
 899 clean_blob drivers/scsi/ql12160_fw.h
 900 clean_sed '
 901 s,[&]\(fw12\(160\|80e\)i\|risc\(_code\)\?\)_\(code01\[0\]\|length01\),NULL,g;
 902 /^qla1280_load_firmware\(_pio\)\?([^;]*$/,/^}$/{
 903   /risc_code_size = [*]/{
 904     i\
 905         if (!risc_code_address) {\
 906                 printk(KERN_ERR "scsi(%li): Missing Free firmware\\n", ha->host_no);\
 907                 return -EINVAL;\
 908         }
 909   }
 910 }
 911 /^qla1280_load_firmware_dma([^;]*$/,/^}$/{
 912   /risc_code_size = [*]/{
 913     i\
 914         if (!risc_code_address) {\
 915                 printk(KERN_ERR "scsi(%li): Missing Free firmware\\n", ha->host_no);\
 916                 err = -EINVAL;\
 917                 goto out;\
 918         }
 919   }
 920 }' drivers/scsi/qla1280.c 'report missing Free firmware'
 921 clean_kconfig drivers/scsi/Kconfig 'SCSI_QLOGIC_1280'
 922 clean_mk CONFIG_SCSI_QLOGIC_1280 drivers/scsi/Makefile
 923
 924
 925 #######################
 926 # Removed USB Drivers #
 927 #######################
 928
 929 # misc
 930
 931 announce USB_EMI26 - "EMI 2|6 USB Audio interface"
 932 # These files are not under the GPL, better remove them all.
 933 drop_fw_file firmware/emi26/bitstream.HEX firmware/emi26/bitstream.fw
 934 drop_fw_file firmware/emi26/firmware.HEX firmware/emi26/firmware.fw
 935 drop_fw_file firmware/emi26/loader.HEX firmware/emi26/loader.fw
 936 reject_firmware drivers/usb/misc/emi26.c
 937 clean_blob drivers/usb/misc/emi26.c
 938 clean_kconfig drivers/usb/misc/Kconfig 'USB_EMI26'
 939 clean_mk CONFIG_USB_EMI26 drivers/usb/misc/Makefile
 940
 941 announce USB_EMI62 - "EMI 6|2m USB Audio interface"
 942 # These files are probably not under the GPL, better remove them all.
 943 drop_fw_file firmware/emi62/bitstream.HEX firmware/emi62/bitstream.fw
 944 drop_fw_file firmware/emi62/loader.HEX firmware/emi62/loader.fw
 945 drop_fw_file firmware/emi62/midi.HEX firmware/emi62/midi.fw
 946 drop_fw_file firmware/emi62/spdif.HEX firmware/emi62/spdif.fw
 947 reject_firmware drivers/usb/misc/emi62.c
 948 clean_blob drivers/usb/misc/emi62.c
 949 clean_kconfig drivers/usb/misc/Kconfig 'USB_EMI62'
 950 clean_mk CONFIG_USB_EMI62 drivers/usb/misc/Makefile
 951
 952 # serial
 953
 954 announce USB_SERIAL_KEYSPAN - "USB Keyspan USA-xxx Serial Driver"
 955 drop_fw_file firmware/keyspan/mpr.HEX firmware/keyspan/mpr.fw
 956 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_MPR'
 957 drop_fw_file firmware/keyspan/usa18x.HEX firmware/keyspan/usa18x.fw
 958 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA18X'
 959 drop_fw_file firmware/keyspan/usa19.HEX firmware/keyspan/usa19.fw
 960 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA19'
 961 drop_fw_file firmware/keyspan/usa19qi.HEX firmware/keyspan/usa19qi.fw
 962 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA19QI'
 963 drop_fw_file firmware/keyspan/usa19qw.HEX firmware/keyspan/usa19qw.fw
 964 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA19QW'
 965 drop_fw_file firmware/keyspan/usa19w.HEX firmware/keyspan/usa19w.fw
 966 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA19W'
 967 drop_fw_file firmware/keyspan/usa28.HEX firmware/keyspan/usa28.fw
 968 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA28'
 969 drop_fw_file firmware/keyspan/usa28xa.HEX firmware/keyspan/usa28xa.fw
 970 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA28XA'
 971 drop_fw_file firmware/keyspan/usa28xb.HEX firmware/keyspan/usa28xb.fw
 972 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA28XB'
 973 drop_fw_file firmware/keyspan/usa28x.HEX firmware/keyspan/usa28x.fw
 974 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA28X'
 975 drop_fw_file firmware/keyspan/usa49w.HEX firmware/keyspan/usa49w.fw
 976 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA49W'
 977 drop_fw_file firmware/keyspan/usa49wlc.HEX firmware/keyspan/usa49wlc.fw
 978 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA49WLC'
 979 reject_firmware drivers/usb/serial/keyspan.c
 980 clean_blob drivers/usb/serial/keyspan.c
 981 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN'
 982 clean_mk CONFIG_USB_SERIAL_KEYSPAN drivers/usb/serial/Makefile
 983
 984 announce USB_SERIAL_KEYSPAN_PDA - "USB Keyspan PDA Single Port Serial Driver"
 985 clean_sed '
 986 s,request_ihex_firmware,/*KEYSPAN_PDA*/&,
 987 ' drivers/usb/serial/keyspan_pda.c 'accept Free firmware'
 988
 989 announce USB_SERIAL_EDGEPORT - "USB Inside Out Edgeport Serial Driver"
 990 clean_fw firmware/edgeport/boot.H16 firmware/edgeport/boot.fw
 991 clean_fw firmware/edgeport/boot2.H16 firmware/edgeport/boot2.fw
 992 clean_fw firmware/edgeport/down.H16 firmware/edgeport/down.fw
 993 clean_fw firmware/edgeport/down2.H16 firmware/edgeport/down2.fw
 994 reject_firmware drivers/usb/serial/io_edgeport.c
 995 clean_blob drivers/usb/serial/io_edgeport.c
 996 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_EDGEPORT'
 997 clean_mk CONFIG_USB_SERIAL_EDGEPORT drivers/usb/serial/Makefile
 998
 999 announce USB_SERIAL_EDGEPORT_TI - "USB Inside Out Edgeport Serial Driver (TI devices)"
1000 clean_fw firmware/edgeport/down3.bin.ihex firmware/edgeport/down3.bin
1001 reject_firmware drivers/usb/serial/io_ti.c
1002 clean_blob drivers/usb/serial/io_ti.c
1003 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_EDGEPORT_TI'
1004 clean_mk CONFIG_USB_SERIAL_EDGEPORT_TI drivers/usb/serial/Makefile
1005
1006 announce USB_SERIAL_TI - "USB TI 3410/5052 Serial Driver"
1007 drop_fw_file firmware/ti_3410.fw.ihex firmware/ti_3410.fw
1008 drop_fw_file firmware/ti_5052.fw.ihex firmware/ti_5052.fw
1009 reject_firmware drivers/usb/serial/ti_usb_3410_5052.c
1010 clean_blob drivers/usb/serial/ti_usb_3410_5052.c
1011 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_TI'
1012 clean_mk CONFIG_USB_SERIAL_TI drivers/usb/serial/Makefile
1013
1014 announce USB_SERIAL_WHITEHEAT - "USB ConnectTech WhiteHEAT Serial Driver"
1015 clean_fw firmware/whiteheat.HEX firmware/whiteheat.fw
1016 clean_fw firmware/whiteheat_loader.HEX firmware/whiteheat_loader.fw
1017 clean_fw firmware/whiteheat_loader_debug.HEX firmware/whiteheat_loader_debug.fw
1018 reject_firmware drivers/usb/serial/whiteheat.c
1019 clean_blob drivers/usb/serial/whiteheat.c
1020 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_WHITEHEAT'
1021 clean_mk CONFIG_USB_SERIAL_WHITEHEAT drivers/usb/serial/Makefile
1022
1023
1024 #########################
1025 # Removed Sound Drivers #
1026 #########################
1027
1028 announce SND_CS46XX - "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x"
1029 # This appears to have been extracted from some non-Free driver
1030 clean_file sound/pci/cs46xx/cs46xx_image.h
1031 # The following blobs are definitely extracted from non-Free drivers.
1032 clean_file sound/pci/cs46xx/imgs/cwc4630.h
1033 clean_file sound/pci/cs46xx/imgs/cwcasync.h
1034 clean_file sound/pci/cs46xx/imgs/cwcsnoop.h
1035 clean_sed '
1036 /^\(int \)\?snd_cs46xx_download_image([^;]*$/,/^}$/{
1037   /for.*BA1_MEMORY_COUNT/i\
1038 #if 0
1039   /^}$/{
1040     i\
1041 #else\
1042         snd_printk(KERN_ERR "cs46xx: Missing Free firmware\\n");\
1043         return -EINVAL;\
1044 #endif
1045   }
1046 }
1047 s/cs46xx_dsp_load_module(chip, [&]cwc\(4630\|async\|snoop\)_module)/(snd_printk(KERN_ERR "cs46xx: Missing Free firmware\\n"),-EINVAL)/
1048 ' sound/pci/cs46xx/cs46xx_lib.c 'report missing Free firmware'
1049 clean_blob sound/pci/cs46xx/cs46xx_lib.c
1050 clean_kconfig sound/pci/Kconfig 'SND_CS46XX'
1051 clean_mk 'CONFIG_SND_CS46XX' sound/pci/cs46xx/Makefile
1052
1053 announce SND_KORG1212 - "Korg 1212 IO"
1054 drop_fw_file firmware/korg/k1212.dsp.ihex firmware/korg/k1212.dsp
1055 reject_firmware sound/pci/korg1212/korg1212.c
1056 clean_blob sound/pci/korg1212/korg1212.c
1057 clean_kconfig sound/pci/Kconfig 'SND_KORG1212'
1058 clean_mk 'CONFIG_SND_KORG1212' sound/pci/korg1212/Makefile
1059
1060 announce SND_MAESTRO3 - "ESS Allegro/Maestro3"
1061 drop_fw_file firmware/ess/maestro3_assp_kernel.fw.ihex firmware/ess/maestro3_assp_kernel.fw
1062 drop_fw_file firmware/ess/maestro3_assp_minisrc.fw.ihex firmware/ess/maestro3_assp_minisrc.fw
1063 reject_firmware sound/pci/maestro3.c
1064 clean_blob sound/pci/maestro3.c
1065 clean_kconfig sound/pci/Kconfig 'SND_MAESTRO3'
1066 clean_mk 'CONFIG_SND_MAESTRO3' sound/pci/Makefile
1067
1068 announce SND_YMFPCI - "Yamaha YMF724/740/744/754"
1069 drop_fw_file firmware/yamaha/ds1_ctrl.fw.ihex firmware/yamaha/ds1_ctrl.fw
1070 drop_fw_file firmware/yamaha/ds1_dsp.fw.ihex firmware/yamaha/ds1_dsp.fw
1071 drop_fw_file firmware/yamaha/ds1e_ctrl.fw.ihex firmware/yamaha/ds1e_ctrl.fw
1072 reject_firmware sound/pci/ymfpci/ymfpci_main.c
1073 clean_blob sound/pci/ymfpci/ymfpci_main.c
1074 clean_kconfig sound/pci/Kconfig 'SND_YMFPCI'
1075 clean_mk 'CONFIG_SND_YMFPCI' sound/pci/ymfpci/Makefile
1076
1077 announce SND_SB16_CSP - "SB16 Advanced Signal Processor"
1078 drop_fw_file firmware/sb16/alaw_main.csp.ihex firmware/sb16/alaw_main.csp
1079 drop_fw_file firmware/sb16/mulaw_main.csp.ihex firmware/sb16/mulaw_main.csp
1080 drop_fw_file firmware/sb16/ima_adpcm_init.csp.ihex firmware/sb16/ima_adpcm_init.csp
1081 drop_fw_file firmware/sb16/ima_adpcm_capture.csp.ihex firmware/sb16/ima_adpcm_capture.csp
1082 drop_fw_file firmware/sb16/ima_adpcm_playback.csp.ihex firmware/sb16/ima_adpcm_playback.csp
1083 reject_firmware sound/isa/sb/sb16_csp.c
1084 clean_blob sound/isa/sb/sb16_csp.c
1085 clean_kconfig sound/isa/Kconfig 'SND_SB16_CSP'
1086 clean_mk 'CONFIG_SND_SB16_CSP' sound/isa/sb/Makefile
1087
1088 announce SND_WAVEFRONT - "Turtle Beach Maui,Tropez,Tropez+ (Wavefront)"
1089 clean_blob sound/isa/wavefront/yss225.c
1090 clean_sed '
1091 /firmware = &yss225_registers_firmware/i\
1092         snd_printk(KERN_ERR "FX: Missing Free firmware\\n");\
1093         err = -EINVAL;\
1094         goto out;
1095 ' sound/isa/wavefront/wavefront_fx.c 'report missing Free firmware'
1096 reject_firmware sound/isa/wavefront/wavefront_fx.c
1097 clean_blob sound/isa/wavefront/wavefront_fx.c
1098 reject_firmware sound/isa/wavefront/wavefront_synth.c
1099 clean_blob sound/isa/wavefront/wavefront_synth.c
1100 clean_kconfig sound/isa/Kconfig 'SND_WAVEFRONT'
1101 clean_mk 'CONFIG_SND_WAVEFRONT' sound/isa/wavefront/Makefile
1102
1103
1104 ###########################
1105 # Removed Staging Drivers #
1106 ###########################
1107
1108 # ME4000 - Meilhaus ME-4000 I/O board
1109 clean_file drivers/staging/me4000/me4000_firmware.h
1110 clean_file drivers/staging/me4000/me4610_firmware.h
1111 clean_kconfig drivers/staging/me4000/Kconfig 'ME4000'
1112 clean_mk CONFIG_ME4000 drivers/staging/me4000/Makefile
1113
1114 # SLICOSS - Alacritech Gigabit IS-NIC cards
1115 clean_blob drivers/staging/slicoss/gbdownload.h
1116 clean_blob drivers/staging/slicoss/oasisdownload.h
1117 clean_blob drivers/staging/slicoss/oasisdbgdownload.h
1118 clean_blob drivers/staging/slicoss/gbrcvucode.h
1119 clean_blob drivers/staging/slicoss/oasisrcvucode.h
1120 clean_kconfig drivers/staging/slicoss/Kconfig 'SLICOSS'
1121 clean_mk CONFIG_SLICOSS drivers/staging/slicoss/Makefile
1122
1123 # SXG - Alacritech SLIC Technology Non-Accelerated 10Gbe cards
1124 clean_blob drivers/staging/sxg/saharadbgdownload.h
1125 clean_blob drivers/staging/sxg/sxgphycode.h
1126 clean_kconfig drivers/staging/sxg/Kconfig 'SXG'
1127 clean_mk CONFIG_SXG drivers/staging/sxg/Makefile
1128
1129
1130 exit 0