deblob-2.6.28

   1 #!/bin/sh
   2
   3 #    Copyright (C) 2008, 2009 Alexandre Oliva <lxoliva@fsfla.org>
   4 #    Copyright (C) 2008 Jeff Moe
   5 #
   6 #    This program is free software; you can redistribute it and/or modify
   7 #    it under the terms of the GNU General Public License as published by
   8 #    the Free Software Foundation; either version 2 of the License, or
   9 #    (at your option) any later version.
  10 #
  11 #    This program is distributed in the hope that it will be useful,
  12 #    but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 #    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 #    GNU General Public License for more details.
  15 #
  16 #    You should have received a copy of the GNU General Public License
  17 #    along with this program; if not, write to the Free Software
  18 #    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  19
  20
  21 # deblob - remove non-free blobs from the vanilla linux kernel
  22
  23 # http://www.fsfla.org/svn/fsfla/software/linux-libre
  24
  25
  26 # This script, suited for the kernel version named below, in kver,
  27 # attempts to remove only non-Free Software bits, without removing
  28 # Free Software that happens to be in the same file.
  29
  30 # Drivers that currently require non-Free firmware are retained, but
  31 # firmware included in GPLed sources is replaced with /*(DEBLOBBED)*/
  32 # if the deblob-check script, that knows how to do this, is present.
  33 # -lxoliva
  34
  35
  36 # See also:
  37 # http://wiki.debian.org/KernelFirmwareLicensing
  38 # svn://svn.debian.org/kernel/dists/trunk/linux-2.6/debian/patches/debian/dfsg/files-1
  39 # http://svn.gnewsense.svnhopper.net/gnewsense/builder/trunk/firmware/firmware-removed
  40 # http://svn.gnewsense.svnhopper.net/gnewsense/builder/trunk/gen-kernel
  41
  42 # Thanks to Brian Brazil @ gnewsense
  43
  44
  45 # For each kver release, start extra with an empty string, then count
  46 # from 1 if changes are needed that require rebuilding the tarball.
  47 kver=2.6.28 extra=++
  48
  49 case $1 in
  50 --force) die () { echo ERROR: "$@": ignored >&2; }; shift;;
  51 *) die () { echo "$@" >&2; exit 1; };;
  52 esac
  53
  54 check=`echo $0 | sed 's,/[^/]*$,,'`/deblob-check
  55 if [ ! -f $check ] ; then
  56   die deblob-check script missing, will remove entire files
  57   have_check=false
  58 else
  59   have_check=:
  60 fi
  61
  62 announce () {
  63         echo
  64         echo "$@"
  65 }
  66
  67 clean_file () {
  68         #$1 = filename
  69         if test ! -f $1; then
  70                 die $1 does not exist, something is wrong
  71         fi
  72         rm -v $1
  73 }
  74
  75 check_changed () {
  76         if test ! -f $1; then
  77                 die $1 does not exist, something is wrong
  78         elif cmp $1.deblob $1 > /dev/null; then
  79                 die $1 did not change, something is wrong
  80         fi
  81         mv $1.deblob $1
  82 }
  83
  84 clean_blob () {
  85         #$1 = filename
  86         if $have_check; then
  87             if test ! -f $1; then
  88                 die $1 does not exist, something is wrong
  89             fi
  90             name=$1
  91             echo Removing blobs from $name
  92             set fnord "$@" -d
  93             shift 2
  94             $check "$@" -i linux-$kver $name > $name.deblob
  95             check_changed $name
  96         else
  97             clean_file $1
  98         fi
  99 }
 100
 101 dummy_blob () {
 102         #$1 = filename
 103         if test -f $1; then
 104             echo $1 exists, something is wrong >&2
 105             exit 1
 106         elif test ! -f firmware/Makefile; then
 107             echo firmware/Makefile does not exist, something is wrong >&2
 108             exit 1
 109         fi
 110
 111         sed -i "s,`echo $1 | sed s,^firmware/,,`,\$(DEBLOBBED),g" \
 112           firmware/Makefile
 113 }
 114
 115 clean_fw () {
 116         #$1 = firmware text input, $2 = firmware output
 117         if test ! -f $1; then
 118                 echo $1 does not exist, something is wrong >&2
 119                 exit 1
 120         elif test -f $2; then
 121                 echo $2 exists, something is wrong >&2
 122                 exit 1
 123         fi
 124         clean_blob $1 -s 4
 125         dummy_blob $2
 126 }
 127
 128 drop_fw_file () {
 129         #$1 = firmware text input, $2 = firmware output
 130         if test ! -f $1; then
 131                 echo $1 does not exist, something is wrong >&2
 132                 exit 1
 133         elif test -f $2; then
 134                 echo $2 exists, something is wrong >&2
 135                 exit 1
 136         fi
 137         clean_file $1
 138         dummy_blob $2
 139 }
 140
 141 clean_kconfig () {
 142         #$1 = filename $2 = things to remove
 143         case $1 in
 144         -f)
 145                 shift
 146                 ;;
 147         *)
 148                 if $have_check; then
 149                         return
 150                 fi
 151                 ;;
 152         esac
 153         echo Marking config $2 as depending on NONFREE in $1
 154         sed "/^config \\($2\\)\$/{p;i\
 155         depends on NONFREE
 156 d;}" $1 > $1.deblob
 157         check_changed $1
 158 }
 159
 160 clean_mk () {
 161         #$1 = config $2 = Makefile name
 162         # We don't clean up Makefiles any more --lxoliva
 163         # sed -i "/\\($1\\)/d" $2
 164         # check_changed $2
 165         if sed -n "/\\($1\\)/p" $2 | grep . > /dev/null; then
 166             :
 167         else
 168             die $2 does not contain matches for $1
 169         fi
 170 }
 171
 172 clean_sed () {
 173         #$1 = sed-script $2 = file
 174         echo Cleaning "$2" with sed script "$1"
 175         sed -e "$1" "$2" > "$2".deblob
 176         check_changed "$2"
 177 }
 178
 179 reject_firmware () {
 180         #$1 = file
 181         clean_sed 's,request\(_ihex\|\)_firmware(,reject_firmware(,' "$1"
 182 }
 183
 184 # First, check that files that contain firmwares and their
 185 # corresponding sources are present.
 186
 187 for f in \
 188   drivers/char/ser_a2232fw.h \
 189     drivers/char/ser_a2232fw.ax \
 190   drivers/net/ixp2000/ixp2400_rx.ucode \
 191     drivers/net/ixp2000/ixp2400_rx.uc \
 192   drivers/net/ixp2000/ixp2400_tx.ucode \
 193     drivers/net/ixp2000/ixp2400_rx.uc \
 194   drivers/net/wan/wanxlfw.inc_shipped \
 195     drivers/net/wan/wanxlfw.S \
 196   drivers/net/wireless/atmel.c \
 197     drivers/net/wireless/atmel.c \
 198   drivers/scsi/53c700_d.h_shipped \
 199     drivers/scsi/53c700.scr \
 200   drivers/scsi/aic7xxx/aic79xx_seq.h_shipped \
 201     drivers/scsi/aic7xxx/aic79xx.seq \
 202   drivers/scsi/aic7xxx/aic7xxx_seq.h_shipped \
 203     drivers/scsi/aic7xxx/aic7xxx.seq \
 204   drivers/scsi/aic7xxx_old/aic7xxx_seq.c \
 205     drivers/scsi/aic7xxx_old/aic7xxx.seq \
 206   drivers/scsi/53c7xx_d.h_shipped \
 207     drivers/scsi/53c7xx.scr \
 208   drivers/scsi/sym53c8xx_2/sym_fw1.h \
 209     drivers/scsi/sym53c8xx_2/sym_fw1.h \
 210   drivers/scsi/sym53c8xx_2/sym_fw2.h \
 211     drivers/scsi/sym53c8xx_2/sym_fw2.h \
 212   firmware/dsp56k/bootstrap.bin.ihex \
 213     firmware/dsp56k/bootstrap.asm \
 214   firmware/keyspan_pda/keyspan_pda.HEX \
 215     firmware/keyspan_pda/keyspan_pda.S \
 216   firmware/keyspan_pda/xircom_pgs.HEX \
 217     firmware/keyspan_pda/xircom_pgs.S \
 218   sound/pci/cs46xx/imgs/cwcbinhack.h \
 219     sound/pci/cs46xx/imgs/cwcdma.asp \
 220 ; do
 221   if test ! $f; then
 222     die $f is not present, something is amiss
 223   fi
 224 done
 225
 226 # Identify the tarball.
 227 clean_sed "s,^EXTRAVERSION.*,&-libre$extra," Makefile
 228
 229 # Add reject_firmware and maybe_reject_firmware
 230 cat >> include/linux/firwmare.h <<\EOF
 231 #ifndef _LINUX_LIBRE_FIRMWARE_H
 232 #define _LINUX_LIBRE_FIRMWARE_H
 233
 234 #define NONFREE_FIRMWARE "/*(DEBLOBBED)*/"
 235
 236 static inline int reject_firmware(const struct firmware **fw,
 237                                   const char *name,
 238                                   struct device *device)
 239 {
 240         struct firmware *xfw = NULL;
 241         int retval = request_firmware(&xfw, NONFREE_FIRMWARE, device);
 242         if (!retval)
 243                 release_firmware(xfw);
 244         return -EINVAL;
 245 }
 246 static inline int maybe_reject_firmware(const struct firmware **fw,
 247                                         const char *name,
 248                                         struct device *device)
 249 {
 250         if (strstr (name, NONFREE_FIRMWARE))
 251                 return reject_firmware(fw, name, device);
 252         else
 253                 return request_firmware(fw, name, device);
 254 }
 255 static inline void discard_rejected_firmware(const struct firmware *fw,
 256                                               void *context)
 257 {
 258         release_firmware(fw);
 259 }
 260 static inline int reject_firmware_nowait(
 261         struct module *module, int uevent,
 262         const char *name, struct device *device, void *context,
 263         void (*cont)(const struct firmware *fw, void *context))
 264 {
 265         int retval = request_firmware_nowait(module, uevent, NONFREE_FIRMWARE,
 266                                              device, NULL,
 267                                              discard_rejected_firmware);
 268         if (retval)
 269                 return retval;
 270         return -EINVAL;
 271 }
 272 static inline int maybe_reject_firmware_nowait(
 273         struct module *module, int uevent,
 274         const char *name, struct device *device, void *context,
 275         void (*cont)(const struct firmware *fw, void *context))
 276 {
 277         if (strstr (name, NONFREE_FIRMWARE))
 278                 return reject_firmware_nowait(module, uevent, name,
 279                                               device, context, cont);
 280         else
 281                 return request_firmware_nowait(module, uevent, name,
 282                                                device, context, cont);
 283 }
 284
 285 #endif /* _LINUX_LIBRE_FIRMWARE_H */
 286 EOF
 287
 288 #######################
 289 # Removed ATM Drivers #
 290 #######################
 291
 292 announce ATM_AMBASSADOR -  Madge Ambassador, Collage PCI 155 Server
 293 reject_firmware drivers/atm/ambassador.c
 294 clean_blob drivers/atm/ambassador.c
 295 clean_fw firmware/atmsar11.HEX firmware/atmsar11.fw
 296 clean_kconfig drivers/atm/Kconfig 'ATM_AMBASSADOR'
 297 clean_mk CONFIG_ATM_AMBASSADOR drivers/atm/Makefile
 298
 299 announce ATM_FORE200E_PCA, ATM_FORE200E_SBA - SBA-200E
 300 reject_firmware drivers/atm/fore200e.c
 301 clean_blob drivers/atm/fore200e.c
 302 clean_blob Documentation/networking/fore200e.txt
 303 clean_kconfig drivers/atm/Kconfig 'ATM_FORE.*'
 304 clean_mk CONFIG_ATM_FORE200E drivers/atm/Makefile
 305
 306
 307 ########################
 308 # Removed char Drivers #
 309 ########################
 310
 311 announce COMPUTONE - Computone IntelliPort Plus serial
 312 drop_fw_file firmware/intelliport2.bin.ihex firmware/intelliport2.bin
 313 reject_firmware drivers/char/ip2/ip2main.c
 314 clean_blob drivers/char/ip2/ip2main.c
 315 clean_kconfig drivers/char/Kconfig 'COMPUTONE'
 316 clean_mk CONFIG_COMPUTONE drivers/char/Makefile
 317
 318 # gpu drm
 319
 320 announce DRM_MGA - Matrox g200/g400
 321 clean_blob drivers/gpu/drm/mga/mga_ucode.h
 322 clean_blob drivers/gpu/drm/mga/mga_warp.c
 323 clean_kconfig drivers/gpu/drm/Kconfig 'DRM_MGA'
 324 clean_mk CONFIG_DRM_MGA drivers/gpu/drm/Makefile
 325
 326 announce DRM_R128 - ATI Rage 128
 327 clean_sed '/^static int r128_do_init_cce(/,/^}$/{
 328   /^    r128_cce_load_microcode(dev_priv);$/{
 329     i\
 330         DRM_ERROR("Missing Free microcode!\\n");\
 331         dev->dev_private = (void *)dev_priv;\
 332         r128_do_cleanup_cce(dev);\
 333         return -EINVAL;
 334   }
 335 }' drivers/gpu/drm/r128/r128_cce.c
 336 clean_blob drivers/gpu/drm/r128/r128_cce.c
 337 clean_kconfig drivers/gpu/drm/Kconfig 'DRM_R128'
 338 clean_mk CONFIG_DRM_R128 drivers/gpu/drm/Makefile
 339
 340 announce DRM_RADEON - ATI Radeon
 341 clean_sed '/^static int radeon_do_init_cce(/,/^}$/{
 342   /^    radeon_cp_load_microcode(dev_priv);$/{
 343     i\
 344         DRM_ERROR("Missing Free microcode!\\n");\
 345         radeon_do_cleanup_cp(dev);\
 346         return -EINVAL;
 347   }
 348 }
 349 /^static int radeon_do_resume_cp(/,/^}$/{
 350   /^    radeon_cp_load_microcode(dev_priv);$/{
 351     i\
 352         DRM_ERROR("Missing Free microcode!\\n");\
 353         return -EINVAL;
 354   }
 355 }' drivers/gpu/drm/radeon/radeon_cp.c
 356 clean_blob drivers/gpu/drm/radeon/radeon_microcode.h
 357 clean_kconfig drivers/gpu/drm/Kconfig 'DRM_RADEON'
 358 clean_mk CONFIG_DRM_RADEON drivers/gpu/drm/Makefile
 359
 360
 361 #########################
 362 # Removed Media Drivers #
 363 #########################
 364
 365
 366 announce DVB non-Free firmware scripts and documentation
 367 clean_blob Documentation/dvb/get_dvb_firmware
 368 clean_blob Documentation/dvb/avermedia.txt
 369 clean_blob Documentation/dvb/opera-firmware.txt
 370 clean_blob Documentation/dvb/ttusb-dec.txt
 371
 372 announce DVB_USB_AF9005 - Afatech AF9005 DVB-T USB1.1
 373 clean_file drivers/media/dvb/dvb-usb/af9005-script.h
 374 clean_sed 's,^  deb_info("load init script\\n");$,      {\n             err("Missing Free init script\\n");\n           return scriptlen = ret = -EINVAL;\n             ,' drivers/media/dvb/dvb-usb/af9005-fe.c
 375 clean_blob drivers/media/dvb/dvb-usb/af9005-fe.c
 376 clean_kconfig drivers/media/dvb/dvb-usb/Kconfig 'DVB_USB_AF9005'
 377 clean_mk CONFIG_DVB_USB_AF9005 drivers/media/dvb/dvb-usb/Makefile
 378
 379 # dvb/frontends
 380
 381 announce DVB_SP8870 - Spase sp8870
 382 clean_sed 's,SP8870_DEFAULT_FIRMWARE,NONFREE_FIRMWARE,g' drivers/media/dvb/frontends/sp8870.c
 383 clean_blob drivers/media/dvb/frontends/sp8870.c
 384 clean_kconfig drivers/media/dvb/frontends 'DVB_SP8870'
 385 clean_mk CONFIG_DVB_SP8870 drivers/media/dvb/frontends/Makefile
 386
 387 announce DVB_TDA1004X - Philips TDA10045H/TDA10046H
 388 clean_sed 's,TDA1004[56]_DEFAULT_FIRMWARE,NONFREE_FIRMWARE,g' drivers/media/dvb/frontends/tda1004x.c
 389 clean_blob drivers/media/dvb/frontends/tda1004x.c
 390 clean_kconfig drivers/media/dvb/frontends 'DVB_TDA1004X'
 391 clean_mk CONFIG_DVB_TDA1004X drivers/media/dvb/frontends/Makefile
 392
 393 # dvb/ttpci
 394
 395 announce DVB_AV7110 - AV7110 cards
 396 # The bootcode is actually Free Software under GPLv2, but since it's
 397 # being distributed without source code, we're taking it out for now.
 398 clean_sed 's,^  \/\* boot \*\/$,        printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): Missing Free bootcode\\n");\n     return -EINVAL;\n\n&,' drivers/media/dvb/ttpci/av7110_hw.c
 399 clean_sed 's,mwdebi(.*bootcode.*$,/* & */,' drivers/media/dvb/ttpci/av7110_hw.c
 400 clean_blob drivers/media/dvb/ttpci/av7110_hw.c
 401 clean_sed '/^static int get_firmware(/,/^}$/s, request_firmware(, reject_firmware(,' drivers/media/dvb/ttpci/av7110.c
 402 clean_sed '/^static int alps_tdlb7_request_firmware(/,/^}$/s, request_firmware(, maybe_reject_firmware(,' drivers/media/dvb/ttpci/av7110.c
 403 clean_blob drivers/media/dvb/ttpci/av7110.c
 404 clean_kconfig drivers/media/dvb/ttpci/Kconfig 'DVB_AV7110'
 405 clean_mk CONFIG_DVB_AV7110 drivers/media/dvb/ttpci/Makefile
 406
 407 announce DVB_BUDGET - Budget cards
 408 clean_sed '/^static int alps_tdhd1_204_request_firmware(/,/^}$/s, request_firmware(, maybe_reject_firmware(,' drivers/media/dvb/ttpci/budget.c
 409
 410 announce DVB_BUDGET_AV - Budget cards with analog video inputs
 411 clean_sed '/^static int philips_tu1216_request_firmware(/,/^}$/s, request_firmware(, maybe_reject_firmware(,' drivers/media/dvb/ttpci/budget-av.c
 412
 413 announce DVB_BUDGET_CI - Budget cards with onboard CI connector
 414 clean_sed '/^static int philips_tdm1316l_request_firmware(/,/^}$/s, request_firmware(, maybe_reject_firmware(,' drivers/media/dvb/ttpci/budget-ci.c
 415
 416 # dvb/ttusb-budget
 417
 418 announce DVB_TTUSB_BUDGET - Technotrend/Hauppauge Nova-USB devices
 419 drop_fw_file firmware/ttusb-budget/dspbootcode.bin.ihex firmware/ttusb-budget/dspbootcode.bin
 420 clean_sed '/^static int philips_tdm1316l_request_firmware(/,/^}$/s, request_firmware(, maybe_reject_firmware(,' drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
 421 reject_firmware drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
 422 clean_blob drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
 423 clean_kconfig drivers/media/dvb/ttusb-budget/Kconfig 'DVB_TTUSB_BUDGET'
 424 clean_mk CONFIG_DVB_TTUSB_BUDGET drivers/media/dvb/ttusb-budget/Makefile
 425
 426 # video
 427
 428 announce VIDEO_CPIA2 - CPiA2 Video For Linux
 429 clean_fw firmware/cpia2/stv0672_vp4.bin.ihex firmware/cpia2/stv0672_vp4.bin
 430 reject_firmware drivers/media/video/cpia2/cpia2_core.c
 431 clean_blob drivers/media/video/cpia2/cpia2_core.c
 432 clean_kconfig drivers/media/video/cpia2/Kconfig 'VIDEO_CPIA2'
 433 clean_mk CONFIG_VIDEO_CPIA2 drivers/media/video/cpia2/Makefile
 434
 435 announce USB_DABUSB - DABUSB driver
 436 clean_fw firmware/dabusb/bitstream.bin.ihex firmware/dabusb/bitstream.bin
 437 clean_fw firmware/dabusb/firmware.HEX firmware/dabusb/firmware.fw
 438 reject_firmware drivers/media/video/dabusb.c
 439 clean_blob drivers/media/video/dabusb.c
 440 clean_kconfig drivers/media/Kconfig 'USB_DABUSB'
 441 clean_mk CONFIG_USB_DABUSB drivers/media/video/Makefile
 442
 443 # video/usbvideo
 444
 445 announce USB_VICAM - USB 3com HomeConnect, AKA vicam
 446 drop_fw_file firmware/vicam/firmware.H16 firmware/vicam/firmware.fw
 447 reject_firmware drivers/media/video/vicam.c
 448 clean_blob drivers/media/video/vicam.c
 449 clean_kconfig drivers/media/video/usbvideo/Kconfig 'USB_VICAM'
 450 clean_mk CONFIG_USB_VICAM drivers/media/video/usbvideo/Makefile
 451
 452
 453 #######################
 454 # Removed net Drivers #
 455 #######################
 456
 457 announce ACENIC - Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit
 458 clean_blob drivers/net/acenic_firmware.h
 459 clean_sed 's,   \(ace_load_firmware[^;]*\),     if ((ecode = \1)) goto init_error,' drivers/net/acenic.c
 460 clean_sed '/^static int __devinit ace_load_firmware(/,/^}$/ { /^}$/i\
 461 }\
 462         printk(KERN_ERR "%s: Missing Free firwmare\\n", ap->name);\
 463         return -EINVAL;
 464 }' drivers/net/acenic.c
 465 clean_blob drivers/net/acenic.c
 466 clean_kconfig drivers/net/Kconfig 'ACENIC'
 467 clean_mk CONFIG_ACENIC drivers/net/Makefile
 468
 469 announce ADAPTEC_STARFIRE - Adaptec Starfire/DuraLAN support
 470 # This file requires prior acceptance of the GPL before you can even
 471 # run the code in it.  It's not clear whether this is a further
 472 # requirement that would make the distribution incompatible with the
 473 # GPL, but since nothing remains after we remove the blob, it's
 474 # irrelevant whether the explicit acceptance would be a problem.
 475 clean_file drivers/net/starfire_firmware.h
 476 clean_file drivers/net/starfire_firmware.pl
 477 clean_sed '/Load Rx\/Tx firmware/i\
 478         printk (KERN_ERR "%s: Missing Free firmware\\n", dev->name);\
 479         return -EINVAL;
 480 ' drivers/net/starfire.c
 481 clean_blob drivers/net/starfire.c
 482 clean_kconfig drivers/net/Kconfig 'ADAPTEC_STARFIRE'
 483 clean_mk CONFIG_ADAPTEC_STARFIRE drivers/net/Makefile
 484
 485 announce BNX2 - Broadcom NetXtremeII
 486 clean_file drivers/net/bnx2_fw.h
 487 clean_file drivers/net/bnx2_fw2.h
 488 clean_sed '/ bnx2_init_cpus(/i\
 489         printk (KERN_ERR "%s: Missing Free firmware\\n", bp->dev->name);\
 490         return -EINVAL;\
 491 #define bnx2_init_cpus(bp) (-EINVAL)' drivers/net/bnx2.c
 492 clean_blob drivers/net/bnx2.c
 493 clean_kconfig drivers/net/Kconfig 'BNX2'
 494 clean_mk CONFIG_BNX2 drivers/net/Makefile
 495
 496 announce BNX2X - Broadcom NetXtremeII 10Gb support
 497 clean_blob drivers/net/bnx2x_init_values.h
 498 clean_blob drivers/net/bnx2x_init.h
 499 clean_sed '/^#include "bnx2x_init\.h"/,/^$/ {/^$/i\
 500 #define bnx2x_init_block(bp, start, end) \\\
 501   return printk(KERN_ERR PFX "%s: Missing Free firmware\\n", bp->dev->name),\
 502          -EINVAL;
 503 }' drivers/net/bnx2x_main.c
 504 clean_kconfig drivers/net/Kconfig 'BNX2X'
 505 clean_mk CONFIG_BNX2X drivers/net/Makefile
 506
 507 # CASSINI - Sun Cassini
 508 drop_fw_file firmware/sun/cassini.bin.ihex firmware/sun/cassini.bin
 509 clean_kconfig drivers/net/Kconfig 'CASSINI'
 510 clean_mk CONFIG_CASSINI drivers/net/Makefile
 511
 512 # CHELSIO_T3 - Chelsio AEL 2005 support
 513 clean_blob drivers/net/cxgb3/ael1002.c
 514 clean_kconfig drivers/net/Kconfig 'CHELSIO_T3'
 515 clean_mk CONFIG_CHELSIO_T3 drivers/net/cxgb3/Makefile
 516
 517 # E100 - Intel(R) PRO/100+
 518 clean_blob drivers/net/e100.c
 519 if $have_check; then
 520   sed -i 's:\(\/\*(DEBLOBBED)\*\/\),:\1:' drivers/net/e100.c
 521 else
 522   clean_kconfig drivers/net/Kconfig 'E100'
 523   clean_mk CONFIG_E100 drivers/net/Makefile
 524 fi
 525
 526 # MYRI_SBUS - MyriCOM Gigabit Ethernet
 527 clean_blob drivers/net/myri_code.h
 528 clean_kconfig drivers/net/Kconfig 'MYRI_SBUS'
 529 clean_mk CONFIG_MYRI_SBUS drivers/net/Makefile
 530
 531 # TEHUTI - Tehuti Networks 10G Ethernet
 532 clean_blob drivers/net/tehuti_fw.h -s 4
 533 clean_kconfig drivers/net/Kconfig 'TEHUTI'
 534 clean_mk CONFIG_TEHUTI drivers/net/Makefile
 535
 536 # TIGON3 - Broadcom Tigon3
 537 patch --no-backup-if-mismatch --batch -p0 <<\EOF || \
 538   die failed to remove license comments from drivers/net/tg3.c \
 539   # patches/linux-2.6-tg3-clean.patch
 540 --- drivers/net/tg3.c
 541 +++ drivers/net/tg3.c
 542 @@ -5,14 +5,6 @@
 543   * Copyright (C) 2001, 2002, 2003 Jeff Garzik (jgarzik@pobox.com)
 544   * Copyright (C) 2004 Sun Microsystems Inc.
 545   * Copyright (C) 2005-2007 Broadcom Corporation.
 546 - *
 547 - * Firmware is:
 548 - *     Derived from proprietary unpublished source code,
 549 - *     Copyright (C) 2000-2003 Broadcom Corporation.
 550 - *
 551 - *     Permission is hereby granted for the distribution of this firmware
 552 - *     data in hexadecimal or equivalent format, provided this copyright
 553 - *     notice is accompanying it.
 554   */
 555
 556
 557 EOF
 558 clean_blob drivers/net/tg3.c -s 9
 559 if $have_check; then
 560   sed -i 's:\(\/\*(DEBLOBBED)\*\/\),:\1:' drivers/net/tg3.c
 561 else
 562   clean_kconfig drivers/net/Kconfig 'TIGON3'
 563   clean_mk CONFIG_TIGON3 drivers/net/Makefile
 564 fi
 565
 566 # TYPHOON - 3cr990 series Typhoon
 567 clean_blob drivers/net/typhoon-firmware.h
 568 clean_kconfig drivers/net/Kconfig 'TYPHOON'
 569 clean_mk CONFIG_TYPHOON drivers/net/Makefile
 570
 571 # appletalk
 572
 573 # COPS - COPS LocalTalk PC
 574 # clean_blob drivers/net/appletalk/cops.c
 575 # clean_blob drivers/net/appletalk/cops.h
 576 clean_blob drivers/net/appletalk/cops_ffdrv.h
 577 clean_blob drivers/net/appletalk/cops_ltdrv.h
 578 clean_kconfig drivers/net/appletalk/Kconfig 'COPS'
 579 clean_mk CONFIG_COPS drivers/net/appletalk/Makefile
 580
 581 # hamradio
 582
 583 # YAM - YAM driver for AX.25
 584 clean_blob drivers/net/hamradio/yam1200.h
 585 clean_blob drivers/net/hamradio/yam9600.h
 586 clean_kconfig drivers/net/hamradio/Kconfig 'YAM'
 587 clean_mk CONFIG_YAM drivers/net/hamradio/Makefile
 588
 589 # pcmcia
 590
 591 # PCMCIA_SMC91C92 - SMC 91Cxx PCMCIA
 592 clean_blob drivers/net/pcmcia/ositech.h
 593 clean_kconfig drivers/net/pcmcia/Kconfig 'PCMCIA_SMC91C92'
 594 clean_mk CONFIG_PCMCIA_SMC91C92 drivers/net/pcmcia/Makefile
 595
 596
 597 # tokenring
 598
 599 # 3C359 - 3Com 3C359 Token Link Velocity XL adapter
 600 # No need to remove these, they don't contain non-Free code.
 601 # clean_blob drivers/net/tokenring/3c359.c
 602 # clean_blob drivers/net/tokenring/3c359.h
 603 # This file is not under the GPL, better remove it all.
 604 clean_file drivers/net/tokenring/3c359_microcode.h
 605 clean_kconfig drivers/net/tokenring/Kconfig '3C359'
 606 clean_mk CONFIG_3C359 drivers/net/tokenring/Makefile
 607
 608 # SMCTR - SMC ISA/MCA adapter
 609 # No need to remove these, they don't contain non-Free code.
 610 # clean_blob drivers/net/tokenring/smctr.c
 611 # clean_blob drivers/net/tokenring/smctr.h
 612 # This file is not under the GPL, better remove it all.
 613 drop_fw_file firmware/tr_smctr.bin.ihex firmware/tr_smctr.bin
 614 clean_kconfig drivers/net/tokenring/Kconfig 'SMCTR'
 615 clean_mk CONFIG_SMCTR drivers/net/tokenring/Makefile
 616
 617 # usb
 618
 619 # USB_KAWETH - USB KLSI KL5USB101-based ethernet device support
 620 drop_fw_file firmware/kaweth/new_code.bin.ihex firmware/kaweth/new_code.bin
 621 drop_fw_file firmware/kaweth/new_code_fix.bin.ihex firmware/kaweth/new_code_fix.bin
 622 drop_fw_file firmware/kaweth/trigger_code.bin.ihex firmware/kaweth/trigger_code.bin
 623 drop_fw_file firmware/kaweth/trigger_code_fix.bin.ihex firmware/kaweth/trigger_code_fix.bin
 624 clean_kconfig drivers/net/usb/Kconfig 'USB_KAWETH'
 625 clean_mk CONFIG_USB_KAWETH drivers/net/usb/Makefile
 626
 627 # wireless
 628
 629
 630
 631 ########################
 632 # Removed s390 Drivers #
 633 ########################
 634
 635 # QETH - Gigabit Ethernet device support
 636 clean_blob drivers/s390/net/qeth_core_mpc.c
 637 clean_kconfig drivers/s390/net/Kconfig 'QETH'
 638 clean_mk CONFIG_QETH drivers/s390/net/Makefile
 639
 640
 641 #####################
 642 # Removed SH boards #
 643 #####################
 644
 645 # SH_AP325RXA - Renesas AP-325RXA board
 646 clean_blob arch/sh/boards/board-ap325rxa.c
 647 clean_kconfig arch/sh/boards/Kconfig 'SH_AP325RXA'
 648 clean_mk CONFIG_SH_AP325RXA arch/sh/boards/Makefile
 649
 650 # SH_MIGOR - Reneasas Migo-R
 651 clean_blob arch/sh/boards/mach-migor/lcd_qvga.c -s 16
 652 clean_blob arch/sh/boards/mach-migor/setup.c
 653 clean_kconfig arch/sh/boards/Kconfig 'SH_MIGOR'
 654 clean_kconfig arch/sh/boards/mach-migor/Kconfig 'SH_MIGOR_QVGA'
 655 clean_mk CONFIG_SH_MIGOR_QVGA arch/sh/boards/mach-migor/Makefile
 656
 657
 658 ########################
 659 # Removed SCSI Drivers #
 660 ########################
 661
 662 # SCSI_QLOGICPTI - PTI Qlogic, ISP Driver
 663 clean_blob drivers/scsi/qlogicpti_asm.c
 664 clean_kconfig drivers/scsi/Kconfig 'SCSI_QLOGICPTI'
 665 clean_mk CONFIG_SCSI_QLOGICPTI drivers/scsi/Makefile
 666
 667 # SCSI_ADVANSYS - AdvanSys SCSI
 668 clean_blob drivers/scsi/advansys.c
 669 clean_kconfig drivers/scsi/Kconfig 'SCSI_ADVANSYS'
 670 clean_mk CONFIG_SCSI_ADVANSYS drivers/scsi/Makefile
 671
 672 # SCSI_QLOGIC_1280 - Qlogic QLA 1240/1x80/1x160 SCSI
 673 clean_blob drivers/scsi/ql1280_fw.h
 674 clean_blob drivers/scsi/ql1040_fw.h
 675 clean_blob drivers/scsi/ql12160_fw.h
 676 clean_kconfig drivers/scsi/Kconfig 'SCSI_QLOGIC_1280'
 677 clean_mk CONFIG_SCSI_QLOGIC_1280 drivers/scsi/Makefile
 678
 679
 680 #######################
 681 # Removed USB Drivers #
 682 #######################
 683
 684 # misc
 685
 686 # USB_EMI26 - EMI 2|6 USB Audio interface
 687 # No need to remove this, it doesn't contain non-Free code.
 688 # clean_blob drivers/usb/misc/emi26.c
 689 # These files are not under the GPL, better remove them all.
 690 drop_fw_file firmware/emi26/bitstream.HEX firmware/emi26/bitstream.fw
 691 drop_fw_file firmware/emi26/firmware.HEX firmware/emi26/firmware.fw
 692 drop_fw_file firmware/emi26/loader.HEX firmware/emi26/loader.fw
 693 clean_kconfig drivers/usb/misc/Kconfig 'USB_EMI26'
 694 clean_mk CONFIG_USB_EMI26 drivers/usb/misc/Makefile
 695
 696 # USB_EMI62 - EMI 6|2m USB Audio interface
 697 # No need to remove this, it doesn't contain non-Free code.
 698 # clean_blob drivers/usb/misc/emi62.c
 699 # These files are probably not under the GPL, better remove them all.
 700 drop_fw_file firmware/emi62/bitstream.HEX firmware/emi62/bitstream.fw
 701 drop_fw_file firmware/emi62/loader.HEX firmware/emi62/loader.fw
 702 drop_fw_file firmware/emi62/midi.HEX firmware/emi62/midi.fw
 703 drop_fw_file firmware/emi62/spdif.HEX firmware/emi62/spdif.fw
 704 clean_kconfig drivers/usb/misc/Kconfig 'USB_EMI62'
 705 clean_mk CONFIG_USB_EMI62 drivers/usb/misc/Makefile
 706
 707 # USB_SISUSBVGA - USB 2.0 SVGA dongle support (Net2280/SiS315)
 708 clean_blob drivers/usb/misc/sisusbvga/sisusb_init.h
 709 clean_kconfig drivers/usb/misc/sisusbvga/Kconfig 'USB_SISUSBVGA'
 710 clean_mk CONFIG_USB_SISUSBVGA drivers/usb/misc/sisusbvga/Makefile
 711
 712 # serial
 713
 714 # USB_SERIAL_KEYSPAN_MPR - USB Keyspan MPR Firmware
 715 drop_fw_file firmware/keyspan/mpr.HEX firmware/keyspan/mpr.fw
 716 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_MPR'
 717 # USB_SERIAL_KEYSPAN_USA18X - USB Keyspan USA-18X Firmware
 718 drop_fw_file firmware/keyspan/usa18x.HEX firmware/keyspan/usa18x.fw
 719 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA18X'
 720 # USB_SERIAL_KEYSPAN_USA19 - USB Keyspan USA-19 Firmware
 721 drop_fw_file firmware/keyspan/usa19.HEX firmware/keyspan/usa19.fw
 722 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA19'
 723 # USB_SERIAL_KEYSPAN_USA19QI - USB Keyspan USA-19QI Firmware
 724 drop_fw_file firmware/keyspan/usa19qi.HEX firmware/keyspan/usa19qi.fw
 725 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA19QI'
 726 # USB_SERIAL_KEYSPAN_USA19QW - USB Keyspan USA-19QW Firmware
 727 drop_fw_file firmware/keyspan/usa19qw.HEX firmware/keyspan/usa19qw.fw
 728 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA19QW'
 729 # USB_SERIAL_KEYSPAN_USA19W - USB Keyspan USA-19W Firmware
 730 drop_fw_file firmware/keyspan/usa19w.HEX firmware/keyspan/usa19w.fw
 731 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA19W'
 732 # USB_SERIAL_KEYSPAN_USA28 - USB Keyspan USA-28 Firmware
 733 drop_fw_file firmware/keyspan/usa28.HEX firmware/keyspan/usa28.fw
 734 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA28'
 735 # USB_SERIAL_KEYSPAN_USA28XA - USB Keyspan USA-28XA Firmware
 736 drop_fw_file firmware/keyspan/usa28xa.HEX firmware/keyspan/usa28xa.fw
 737 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA28XA'
 738 # USB_SERIAL_KEYSPAN_USA28XB - USB Keyspan USA-28XB Firmware
 739 drop_fw_file firmware/keyspan/usa28xb.HEX firmware/keyspan/usa28xb.fw
 740 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA28XB'
 741 # USB_SERIAL_KEYSPAN_USA28X - USB Keyspan USA-28X Firmware
 742 drop_fw_file firmware/keyspan/usa28x.HEX firmware/keyspan/usa28x.fw
 743 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA28X'
 744 # USB_SERIAL_KEYSPAN_USA49W - USB Keyspan USA-49W Firmware
 745 drop_fw_file firmware/keyspan/usa49w.HEX firmware/keyspan/usa49w.fw
 746 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA49W'
 747 # USB_SERIAL_KEYSPAN_USA49WLC - USB Keyspan USA-49WLC Firmware
 748 drop_fw_file firmware/keyspan/usa49wlc.HEX firmware/keyspan/usa49wlc.fw
 749 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_KEYSPAN_USA49WLC'
 750 clean_mk CONFIG_USB_SERIAL_KEYSPAN drivers/usb/serial/Makefile
 751
 752 # USB_SERIAL_EDGEPORT - USB Inside Out Edgeport Serial Driver
 753 clean_fw firmware/edgeport/boot.H16 firmware/edgeport/boot.fw
 754 clean_fw firmware/edgeport/down.H16 firmware/edgeport/down.fw
 755 clean_fw firmware/edgeport/down2.H16 firmware/edgeport/down2.fw
 756 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_EDGEPORT'
 757 clean_mk CONFIG_USB_SERIAL_EDGEPORT drivers/usb/serial/Makefile
 758
 759 # USB_SERIAL_EDGEPORT_TI - USB Inside Out Edgeport Serial Driver (TI devices)
 760 clean_fw firmware/edgeport/boot2.H16 firmware/edgeport/boot2.fw
 761 clean_fw firmware/edgeport/down3.bin.ihex firmware/edgeport/down3.bin
 762 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_EDGEPORT_TI'
 763 clean_mk CONFIG_USB_SERIAL_EDGEPORT_TI drivers/usb/serial/Makefile
 764
 765 # USB_SERIAL_TI - USB TI 3410/5052 Serial Driver
 766 drop_fw_file firmware/ti_3410.fw.ihex firmware/ti_3410.fw
 767 drop_fw_file firmware/ti_5052.fw.ihex firmware/ti_5052.fw
 768 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_TI'
 769 clean_mk CONFIG_USB_SERIAL_TI drivers/usb/serial/Makefile
 770
 771 # USB_SERIAL_WHITEHEAT - USB ConnectTech WhiteHEAT Serial Driver
 772 clean_fw firmware/whiteheat.HEX firmware/whiteheat.fw
 773 clean_fw firmware/whiteheat_loader.HEX firmware/whiteheat_loader.fw
 774 clean_fw firmware/whiteheat_loader_debug.HEX firmware/whiteheat_loader_debug.fw
 775 clean_kconfig drivers/usb/serial/Kconfig 'USB_SERIAL_WHITEHEAT'
 776 clean_mk CONFIG_USB_SERIAL_WHITEHEAT drivers/usb/serial/Makefile
 777
 778
 779 #########################
 780 # Removed video Drivers #
 781 #########################
 782
 783 # FB_ASILIANT - Asiliant (Chips) 69000 display support
 784 clean_blob drivers/video/asiliantfb.c
 785 clean_kconfig drivers/video/Kconfig 'FB_ASILIANT'
 786 clean_mk CONFIG_FB_ASILIANT drivers/video/Makefile
 787
 788 # FB_CT65550 - Chips 65550 display support
 789 clean_blob drivers/video/chipsfb.c
 790 clean_kconfig drivers/video/Kconfig 'FB_CT65550'
 791 clean_mk CONFIG_FB_CT65550 drivers/video/Makefile
 792
 793 # USB_GSPCA - Conexant 11646
 794 clean_blob drivers/media/video/gspca/conex.c
 795 # clean_kconfig drivers/video/gspca/Kconfig 'USB_GSPCA'
 796 # clean_mk CONFIG_USB_GSPCA drivers/video/Makefile
 797
 798 #########################
 799 # Removed Sound Drivers #
 800 #########################
 801
 802 # SND_CS46XX - Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x
 803 clean_blob sound/pci/cs46xx/cs46xx_image.h
 804 # Blobs containing comments, not recognized by deblob-check
 805 clean_file sound/pci/cs46xx/imgs/cwc4630.h
 806 clean_file sound/pci/cs46xx/imgs/cwcasync.h
 807 clean_file sound/pci/cs46xx/imgs/cwcdma.h
 808 clean_file sound/pci/cs46xx/imgs/cwcsnoop.h
 809 clean_kconfig sound/pci/Kconfig 'SND_CS46XX'
 810 # sed -i '/cs46xx\/ \\/d' sound/pci/Makefile
 811
 812 # SND_KORG1212 - Korg 1212 IO
 813 drop_fw_file firmware/korg/k1212.dsp.ihex firmware/korg/k1212.dsp
 814
 815 # SND_MAESTRO3 - ESS Allegro/Maestro3
 816 drop_fw_file firmware/ess/maestro3_assp_kernel.fw.ihex firmware/ess/maestro3_assp_kernel.fw
 817 drop_fw_file firmware/ess/maestro3_assp_minisrc.fw.ihex firmware/ess/maestro3_assp_minisrc.fw
 818
 819 # SND_YMFPCI - Yamaha YMF724/740/744/754
 820 drop_fw_file firmware/yamaha/ds1_ctrl.fw.ihex firmware/yamaha/ds1_ctrl.fw
 821 drop_fw_file firmware/yamaha/ds1_dsp.fw.ihex firmware/yamaha/ds1_dsp.fw
 822 drop_fw_file firmware/yamaha/ds1e_ctrl.fw.ihex firmware/yamaha/ds1e_ctrl.fw
 823
 824 # SND_SB16_CSP_FIRMWARE_IN_KERNEL - SB16 Advanced Signal Processor
 825 drop_fw_file firmware/sb16/alaw_main.csp.ihex firmware/sb16/alaw_main.csp
 826 drop_fw_file firmware/sb16/mulaw_main.csp.ihex firmware/sb16/mulaw_main.csp
 827 drop_fw_file firmware/sb16/ima_adpcm_init.csp.ihex firmware/sb16/ima_adpcm_init.csp
 828 drop_fw_file firmware/sb16/ima_adpcm_capture.csp.ihex firmware/sb16/ima_adpcm_capture.csp
 829 drop_fw_file firmware/sb16/ima_adpcm_playback.csp.ihex firmware/sb16/ima_adpcm_playback.csp
 830
 831 # SND_WAVEFRONT_FIRMWARE_IN_KERNEL
 832 # Most of this file is not matched by deblob-check because of WAIT_IDLE.
 833 # Just remove it.
 834 clean_file sound/isa/wavefront/yss225.c
 835 clean_kconfig sound/isa/Kconfig 'SND_WAVEFRONT_FIRMWARE_IN_KERNEL'
 836
 837
 838 ###########################
 839 # Removed Staging Drivers #
 840 ###########################
 841
 842 # ME4000 - Meilhaus ME-4000 I/O board
 843 clean_file drivers/staging/me4000/me4000_firmware.h
 844 clean_file drivers/staging/me4000/me4610_firmware.h
 845 clean_kconfig drivers/staging/me4000/Kconfig 'ME4000'
 846 clean_mk CONFIG_ME4000 drivers/staging/me4000/Makefile
 847
 848 # SLICOSS - Alacritech Gigabit IS-NIC cards
 849 clean_blob drivers/staging/slicoss/gbdownload.h
 850 clean_blob drivers/staging/slicoss/oasisdownload.h
 851 clean_blob drivers/staging/slicoss/oasisdbgdownload.h
 852 clean_blob drivers/staging/slicoss/gbrcvucode.h
 853 clean_blob drivers/staging/slicoss/oasisrcvucode.h
 854 clean_kconfig drivers/staging/slicoss/Kconfig 'SLICOSS'
 855 clean_mk CONFIG_SLICOSS drivers/staging/slicoss/Makefile
 856
 857 # SXG - Alacritech SLIC Technology Non-Accelerated 10Gbe cards
 858 clean_blob drivers/staging/sxg/saharadbgdownload.h
 859 clean_blob drivers/staging/sxg/sxgphycode.h
 860 clean_kconfig drivers/staging/sxg/Kconfig 'SXG'
 861 clean_mk CONFIG_SXG drivers/staging/sxg/Makefile
 862
 863 exit 0