bindings/pinctrl/qcom,sm8550-tlmm.yaml

   1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/pinctrl/qcom,sm8550-tlmm.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Qualcomm Technologies, Inc. SM8550 TLMM block
   8
   9 maintainers:
  10   - Abel Vesa <abel.vesa@linaro.org>
  11
  12 description:
  13   Top Level Mode Multiplexer pin controller in Qualcomm SM8550 SoC.
  14
  15 allOf:
  16   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
  17
  18 properties:
  19   compatible:
  20     const: qcom,sm8550-tlmm
  21
  22   reg:
  23     maxItems: 1
  24
  25   interrupts:
  26     maxItems: 1
  27
  28   gpio-reserved-ranges:
  29     minItems: 1
  30     maxItems: 105
  31
  32   gpio-line-names:
  33     maxItems: 210
  34
  35 patternProperties:
  36   "-state$":
  37     oneOf:
  38       - $ref: "#/$defs/qcom-sm8550-tlmm-state"
  39       - patternProperties:
  40           "-pins$":
  41             $ref: "#/$defs/qcom-sm8550-tlmm-state"
  42         additionalProperties: false
  43
  44 $defs:
  45   qcom-sm8550-tlmm-state:
  46     type: object
  47     description:
  48       Pinctrl node's client devices use subnodes for desired pin configuration.
  49       Client device subnodes use below standard properties.
  50     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
  51     unevaluatedProperties: false
  52
  53     properties:
  54       pins:
  55         description:
  56           List of gpio pins affected by the properties specified in this
  57           subnode.
  58         items:
  59           oneOf:
  60             - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
  61             - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
  62         minItems: 1
  63         maxItems: 36
  64
  65       function:
  66         description:
  67           Specify the alternative function to be configured for the specified
  68           pins.
  69         enum: [ aon_cci, aoss_cti, atest_char, atest_usb,
  70                 audio_ext_mclk0, audio_ext_mclk1, audio_ref_clk,
  71                 cam_aon_mclk4, cam_mclk, cci_async_in, cci_i2c_scl,
  72                 cci_i2c_sda, cci_timer, cmu_rng, coex_uart1_rx,
  73                 coex_uart1_tx, coex_uart2_rx, coex_uart2_tx,
  74                 cri_trng, dbg_out_clk, ddr_bist_complete,
  75                 ddr_bist_fail, ddr_bist_start, ddr_bist_stop,
  76                 ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot,
  77                 gcc_gp1, gcc_gp2, gcc_gp3, gpio, i2chub0_se0,
  78                 i2chub0_se1, i2chub0_se2, i2chub0_se3, i2chub0_se4,
  79                 i2chub0_se5, i2chub0_se6, i2chub0_se7, i2chub0_se8,
  80                 i2chub0_se9, i2s0_data0, i2s0_data1, i2s0_sck,
  81                 i2s0_ws, i2s1_data0, i2s1_data1, i2s1_sck, i2s1_ws,
  82                 ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0_out,
  83                 mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out,
  84                 mdp_vsync_e, nav_gpio0, nav_gpio1, nav_gpio2,
  85                 pcie0_clk_req_n, pcie1_clk_req_n, phase_flag,
  86                 pll_bist_sync, pll_clk_aux, prng_rosc0, prng_rosc1,
  87                 prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio,
  88                 qlink0_enable, qlink0_request, qlink0_wmss,
  89                 qlink1_enable, qlink1_request, qlink1_wmss,
  90                 qlink2_enable, qlink2_request, qlink2_wmss,
  91                 qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs,
  92                 qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4,
  93                 qup1_se5, qup1_se6, qup1_se7, qup2_se0,
  94                 qup2_se0_l0_mira, qup2_se0_l0_mirb, qup2_se0_l1_mira,
  95                 qup2_se0_l1_mirb, qup2_se0_l2_mira, qup2_se0_l2_mirb,
  96                 qup2_se0_l3_mira, qup2_se0_l3_mirb, qup2_se1,
  97                 qup2_se2, qup2_se3, qup2_se4, qup2_se5, qup2_se6,
  98                 qup2_se7, sd_write_protect, sdc40, sdc41, sdc42,
  99                 sdc43, sdc4_clk, sdc4_cmd, tb_trig_sdc2, tb_trig_sdc4,
 100                 tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
 101                 tgu_ch3_trigout, tmess_prng0, tmess_prng1, tmess_prng2,
 102                 tmess_prng3, tsense_pwm1, tsense_pwm2, tsense_pwm3,
 103                 uim0_clk, uim0_data, uim0_present, uim0_reset,
 104                 uim1_clk, uim1_data, uim1_present, uim1_reset,
 105                 usb1_hs, usb_phy, vfr_0, vfr_1, vsense_trigger_mirnat ]
 106
 107     required:
 108       - pins
 109
 110 required:
 111   - compatible
 112   - reg
 113
 114 unevaluatedProperties: false
 115
 116 examples:
 117   - |
 118     #include <dt-bindings/interrupt-controller/arm-gic.h>
 119     tlmm: pinctrl@f100000 {
 120         compatible = "qcom,sm8550-tlmm";
 121         reg = <0x0f100000 0x300000>;
 122         gpio-controller;
 123         #gpio-cells = <2>;
 124         gpio-ranges = <&tlmm 0 0 211>;
 125         interrupt-controller;
 126         #interrupt-cells = <2>;
 127         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 128
 129         gpio-wo-state {
 130             pins = "gpio1";
 131             function = "gpio";
 132         };
 133
 134         uart-w-state {
 135             rx-pins {
 136                 pins = "gpio26";
 137                 function = "qup2_se7";
 138                 bias-pull-up;
 139             };
 140
 141             tx-pins {
 142                 pins = "gpio27";
 143                 function = "qup2_se7";
 144                 bias-disable;
 145             };
 146         };
 147     };
 148 ...