bindings/pinctrl/qcom,sdm670-tlmm.yaml

   1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/pinctrl/qcom,sdm670-tlmm.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Qualcomm Technologies, Inc. SDM670 TLMM block
   8
   9 maintainers:
  10   - Richard Acayan <mailingradian@gmail.com>
  11
  12 description: |
  13   The Top Level Mode Multiplexer (TLMM) block found in the SDM670 platform.
  14
  15 allOf:
  16   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
  17
  18 properties:
  19   compatible:
  20     const: qcom,sdm670-tlmm
  21
  22   reg:
  23     maxItems: 1
  24
  25   interrupts:
  26     maxItems: 1
  27
  28   gpio-reserved-ranges:
  29     minItems: 1
  30     maxItems: 75
  31
  32 patternProperties:
  33   "-state$":
  34     oneOf:
  35       - $ref: "#/$defs/qcom-sdm670-tlmm-state"
  36       - patternProperties:
  37           "-pins$":
  38             $ref: "#/$defs/qcom-sdm670-tlmm-state"
  39         additionalProperties: false
  40
  41 $defs:
  42   qcom-sdm670-tlmm-state:
  43     type: object
  44     description:
  45       Pinctrl node's client devices use subnodes for desired pin configuration.
  46       Client device subnodes use below standard properties.
  47     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
  48     unevaluatedProperties: false
  49
  50     properties:
  51       pins:
  52         description:
  53           List of gpio pins affected by the properties specified in this
  54           subnode.
  55         items:
  56           oneOf:
  57             - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
  58             - enum: [ ufs_reset, sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
  59                       sdc2_clk, sdc2_cmd, sdc2_data ]
  60         minItems: 1
  61         maxItems: 36
  62
  63       function:
  64         description:
  65           Specify the alternative function to be configured for the specified
  66           pins.
  67
  68         enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2, atest_usb1, atest_usb10,
  69                 atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21,
  70                 atest_usb22, atest_usb23, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
  71                 cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, dbg_out, ddr_bist,
  72                 ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
  73                 gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en, ldo_update,
  74                 lpass_slimbus, m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3,
  75                 mss_lte, nav_pps, pa_indicator, pci_e0, pci_e1, phase_flag, pll_bist, pll_bypassnl,
  76                 pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, qdss, qlink_enable,
  77                 qlink_request, qua_mi2s, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2,
  78                 qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sdc4_clk,
  79                 sdc4_cmd, sdc4_data, sd_write, sec_mi2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2,
  80                 tgu_ch3, tsif1_clk, tsif1_data, tsif1_en, tsif1_error, tsif1_sync, tsif2_clk,
  81                 tsif2_data, tsif2_en, tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present,
  82                 uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1,
  83                 vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data, ]
  84
  85     required:
  86       - pins
  87
  88 required:
  89   - compatible
  90   - reg
  91
  92 unevaluatedProperties: false
  93
  94 examples:
  95   - |
  96     #include <dt-bindings/interrupt-controller/arm-gic.h>
  97     pinctrl@3400000 {
  98         compatible = "qcom,sdm670-tlmm";
  99         reg = <0x03400000 0x300000>;
 100         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 101         gpio-controller;
 102         #gpio-cells = <2>;
 103         interrupt-controller;
 104         #interrupt-cells = <2>;
 105         gpio-ranges = <&tlmm 0 0 151>;
 106
 107         qup-i2c9-state {
 108             pins = "gpio6", "gpio7";
 109             function = "qup9";
 110         };
 111     };
 112 ...