bindings/pinctrl/qcom,msm8916-pinctrl.yaml

   1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/pinctrl/qcom,msm8916-pinctrl.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Qualcomm MSM8916 TLMM pin controller
   8
   9 maintainers:
  10   - Bjorn Andersson <andersson@kernel.org>
  11   - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
  12
  13 description:
  14   Top Level Mode Multiplexer pin controller in Qualcomm MSM8916 SoC.
  15
  16 properties:
  17   compatible:
  18     const: qcom,msm8916-pinctrl
  19
  20   reg:
  21     maxItems: 1
  22
  23   interrupts:
  24     maxItems: 1
  25
  26   gpio-reserved-ranges:
  27     minItems: 1
  28     maxItems: 61
  29
  30   gpio-line-names:
  31     maxItems: 122
  32
  33 patternProperties:
  34   "-state$":
  35     oneOf:
  36       - $ref: "#/$defs/qcom-msm8916-tlmm-state"
  37       - patternProperties:
  38           "-pins$":
  39             $ref: "#/$defs/qcom-msm8916-tlmm-state"
  40         additionalProperties: false
  41
  42 $defs:
  43   qcom-msm8916-tlmm-state:
  44     type: object
  45     description:
  46       Pinctrl node's client devices use subnodes for desired pin configuration.
  47       Client device subnodes use below standard properties.
  48     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
  49     unevaluatedProperties: false
  50
  51     properties:
  52       pins:
  53         description:
  54           List of gpio pins affected by the properties specified in this
  55           subnode.
  56         items:
  57           oneOf:
  58             - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9]|12[01])$"
  59             - enum: [ qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
  60                       qdsd_data3, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
  61                       sdc2_cmd, sdc2_data ]
  62         minItems: 1
  63         maxItems: 36
  64
  65       function:
  66         description:
  67           Specify the alternative function to be configured for the specified
  68           pins.
  69
  70         enum: [ gpio, adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char,
  71                 atest_char0, atest_char1, atest_char2, atest_char3,
  72                 atest_combodac, atest_gpsadc0, atest_gpsadc1, atest_tsens,
  73                 atest_wlan0, atest_wlan1, backlight_en, bimc_dte0, bimc_dte1,
  74                 blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
  75                 blsp_i2c6, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2,
  76                 blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2,
  77                 blsp_spi2_cs3, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2,
  78                 blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_uart1,
  79                 blsp_uart2, blsp_uim1, blsp_uim2, cam1_rst, cam1_standby,
  80                 cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0,
  81                 cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out,
  82                 display_5v, dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc,
  83                 euro_us, ext_lpass, flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b,
  84                 gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b,
  85                 gsm0_tx0, gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0,
  86                 kpsns1, kpsns2, ldo_en, ldo_update, mag_int, mdp_vsync,
  87                 modem_tsync, m_voc, nav_pps, nav_tsync, pa_indicator, pbs0,
  88                 pbs1, pbs2, pri_mi2s, pri_mi2s_ws, prng_rosc,
  89                 pwr_crypto_enabled_a, pwr_crypto_enabled_b,
  90                 pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
  91                 pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1,
  92                 qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0,
  93                 qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1,
  94                 qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a,
  95                 qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, reset_n,
  96                 sd_card, sd_write, sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1,
  97                 uim1, uim2, uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan,
  98                 webcam1_rst ]
  99
 100     required:
 101       - pins
 102
 103 allOf:
 104   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 105
 106 required:
 107   - compatible
 108   - reg
 109
 110 unevaluatedProperties: false
 111
 112 examples:
 113   - |
 114     #include <dt-bindings/interrupt-controller/arm-gic.h>
 115
 116     msmgpio: pinctrl@1000000 {
 117         compatible = "qcom,msm8916-pinctrl";
 118         reg = <0x01000000 0x300000>;
 119         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 120         gpio-controller;
 121         gpio-ranges = <&msmgpio 0 0 122>;
 122         #gpio-cells = <2>;
 123         interrupt-controller;
 124         #interrupt-cells = <2>;
 125
 126         blsp1-uart2-sleep-state {
 127             pins = "gpio4", "gpio5";
 128             function = "gpio";
 129
 130             drive-strength = <2>;
 131             bias-pull-down;
 132         };
 133
 134         spi1-default-state {
 135             spi-pins {
 136                 pins = "gpio0", "gpio1", "gpio3";
 137                 function = "blsp_spi1";
 138
 139                 drive-strength = <12>;
 140                 bias-disable;
 141             };
 142
 143             cs-pins {
 144                 pins = "gpio2";
 145                 function = "gpio";
 146
 147                 drive-strength = <16>;
 148                 bias-disable;
 149                 output-high;
 150             };
 151         };
 152     };