bindings/display/bridge/cdns,dsi.yaml

   1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/display/bridge/cdns,dsi.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Cadence DSI bridge
   8
   9 maintainers:
  10   - Boris Brezillon <boris.brezillon@bootlin.com>
  11
  12 description: |
  13    CDNS DSI is a bridge device which converts DPI to DSI
  14
  15 properties:
  16   compatible:
  17     enum:
  18       - cdns,dsi
  19       - ti,j721e-dsi
  20
  21   reg:
  22     minItems: 1
  23     items:
  24       - description:
  25           Register block for controller's registers.
  26       - description:
  27           Register block for wrapper settings registers in case of TI J7 SoCs.
  28
  29   clocks:
  30     items:
  31       - description: PSM clock, used by the IP
  32       - description: sys clock, used by the IP
  33
  34   clock-names:
  35     items:
  36       - const: dsi_p_clk
  37       - const: dsi_sys_clk
  38
  39   phys:
  40     maxItems: 1
  41
  42   phy-names:
  43     const: dphy
  44
  45   interrupts:
  46     maxItems: 1
  47
  48   resets:
  49     maxItems: 1
  50
  51   reset-names:
  52     const: dsi_p_rst
  53
  54   ports:
  55     $ref: /schemas/graph.yaml#/properties/ports
  56
  57     properties:
  58       port@0:
  59         $ref: /schemas/graph.yaml#/properties/port
  60         description:
  61           Output port representing the DSI output. It can have
  62           at most 4 endpoints. The endpoint number is directly encoding
  63           the DSI virtual channel used by this device.
  64
  65       port@1:
  66         $ref: /schemas/graph.yaml#/properties/port
  67         description:
  68           Input port representing the DPI input.
  69
  70     required:
  71       - port@1
  72
  73 allOf:
  74   - $ref: ../dsi-controller.yaml#
  75
  76   - if:
  77       properties:
  78         compatible:
  79           contains:
  80             const: ti,j721e-dsi
  81     then:
  82       properties:
  83         reg:
  84           minItems: 2
  85           maxItems: 2
  86         power-domains:
  87           maxItems: 1
  88     else:
  89       properties:
  90         reg:
  91           maxItems: 1
  92
  93 required:
  94   - compatible
  95   - reg
  96   - interrupts
  97   - clocks
  98   - clock-names
  99   - phys
 100   - phy-names
 101   - ports
 102
 103 unevaluatedProperties: false
 104
 105 examples:
 106   - |
 107     bus {
 108         #address-cells = <2>;
 109         #size-cells = <2>;
 110
 111         dsi@fd0c0000 {
 112             compatible = "cdns,dsi";
 113             reg = <0x0 0xfd0c0000 0x0 0x1000>;
 114             clocks = <&pclk>, <&sysclk>;
 115             clock-names = "dsi_p_clk", "dsi_sys_clk";
 116             interrupts = <1>;
 117             phys = <&dphy0>;
 118             phy-names = "dphy";
 119
 120             #address-cells = <1>;
 121             #size-cells = <0>;
 122
 123             ports {
 124                 #address-cells = <1>;
 125                 #size-cells = <0>;
 126
 127                 port@1 {
 128                     reg = <1>;
 129                     endpoint {
 130                         remote-endpoint = <&xxx_dpi_output>;
 131                     };
 132                 };
 133             };
 134
 135             panel@0 {
 136                 compatible = "panasonic,vvx10f034n00";
 137                 reg = <0>;
 138                 power-supply = <&vcc_lcd_reg>;
 139             };
 140         };
 141     };
 142
 143   - |
 144     bus {
 145         #address-cells = <2>;
 146         #size-cells = <2>;
 147
 148         dsi@fd0c0000 {
 149             compatible = "cdns,dsi";
 150             reg = <0x0 0xfd0c0000 0x0 0x1000>;
 151             clocks = <&pclk>, <&sysclk>;
 152             clock-names = "dsi_p_clk", "dsi_sys_clk";
 153             interrupts = <1>;
 154             phys = <&dphy1>;
 155             phy-names = "dphy";
 156
 157             ports {
 158                 #address-cells = <1>;
 159                 #size-cells = <0>;
 160
 161                 port@0 {
 162                     reg = <0>;
 163                     #address-cells = <1>;
 164                     #size-cells = <0>;
 165
 166                     endpoint@0 {
 167                         reg = <0>;
 168                         remote-endpoint = <&dsi_panel_input>;
 169                     };
 170                 };
 171
 172                 port@1 {
 173                     reg = <1>;
 174                     endpoint {
 175                         remote-endpoint = <&xxx_dpi_output>;
 176                     };
 177                 };
 178             };
 179         };
 180     };