GNU Linux-libre 4.19.245-gnu1
[releases.git] / arch / x86 / kernel / step.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * x86 single-step support code, common to 32-bit and 64-bit.
4  */
5 #include <linux/sched.h>
6 #include <linux/sched/task_stack.h>
7 #include <linux/mm.h>
8 #include <linux/ptrace.h>
9 #include <asm/desc.h>
10 #include <asm/mmu_context.h>
11
12 unsigned long convert_ip_to_linear(struct task_struct *child, struct pt_regs *regs)
13 {
14         unsigned long addr, seg;
15
16         addr = regs->ip;
17         seg = regs->cs;
18         if (v8086_mode(regs)) {
19                 addr = (addr & 0xffff) + (seg << 4);
20                 return addr;
21         }
22
23 #ifdef CONFIG_MODIFY_LDT_SYSCALL
24         /*
25          * We'll assume that the code segments in the GDT
26          * are all zero-based. That is largely true: the
27          * TLS segments are used for data, and the PNPBIOS
28          * and APM bios ones we just ignore here.
29          */
30         if ((seg & SEGMENT_TI_MASK) == SEGMENT_LDT) {
31                 struct desc_struct *desc;
32                 unsigned long base;
33
34                 seg >>= 3;
35
36                 mutex_lock(&child->mm->context.lock);
37                 if (unlikely(!child->mm->context.ldt ||
38                              seg >= child->mm->context.ldt->nr_entries))
39                         addr = -1L; /* bogus selector, access would fault */
40                 else {
41                         desc = &child->mm->context.ldt->entries[seg];
42                         base = get_desc_base(desc);
43
44                         /* 16-bit code segment? */
45                         if (!desc->d)
46                                 addr &= 0xffff;
47                         addr += base;
48                 }
49                 mutex_unlock(&child->mm->context.lock);
50         }
51 #endif
52
53         return addr;
54 }
55
56 static int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs)
57 {
58         int i, copied;
59         unsigned char opcode[15];
60         unsigned long addr = convert_ip_to_linear(child, regs);
61
62         copied = access_process_vm(child, addr, opcode, sizeof(opcode),
63                         FOLL_FORCE);
64         for (i = 0; i < copied; i++) {
65                 switch (opcode[i]) {
66                 /* popf and iret */
67                 case 0x9d: case 0xcf:
68                         return 1;
69
70                         /* CHECKME: 64 65 */
71
72                 /* opcode and address size prefixes */
73                 case 0x66: case 0x67:
74                         continue;
75                 /* irrelevant prefixes (segment overrides and repeats) */
76                 case 0x26: case 0x2e:
77                 case 0x36: case 0x3e:
78                 case 0x64: case 0x65:
79                 case 0xf0: case 0xf2: case 0xf3:
80                         continue;
81
82 #ifdef CONFIG_X86_64
83                 case 0x40 ... 0x4f:
84                         if (!user_64bit_mode(regs))
85                                 /* 32-bit mode: register increment */
86                                 return 0;
87                         /* 64-bit mode: REX prefix */
88                         continue;
89 #endif
90
91                         /* CHECKME: f2, f3 */
92
93                 /*
94                  * pushf: NOTE! We should probably not let
95                  * the user see the TF bit being set. But
96                  * it's more pain than it's worth to avoid
97                  * it, and a debugger could emulate this
98                  * all in user space if it _really_ cares.
99                  */
100                 case 0x9c:
101                 default:
102                         return 0;
103                 }
104         }
105         return 0;
106 }
107
108 /*
109  * Enable single-stepping.  Return nonzero if user mode is not using TF itself.
110  */
111 static int enable_single_step(struct task_struct *child)
112 {
113         struct pt_regs *regs = task_pt_regs(child);
114         unsigned long oflags;
115
116         /*
117          * If we stepped into a sysenter/syscall insn, it trapped in
118          * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP.
119          * If user-mode had set TF itself, then it's still clear from
120          * do_debug() and we need to set it again to restore the user
121          * state so we don't wrongly set TIF_FORCED_TF below.
122          * If enable_single_step() was used last and that is what
123          * set TIF_SINGLESTEP, then both TF and TIF_FORCED_TF are
124          * already set and our bookkeeping is fine.
125          */
126         if (unlikely(test_tsk_thread_flag(child, TIF_SINGLESTEP)))
127                 regs->flags |= X86_EFLAGS_TF;
128
129         /*
130          * Always set TIF_SINGLESTEP - this guarantees that
131          * we single-step system calls etc..  This will also
132          * cause us to set TF when returning to user mode.
133          */
134         set_tsk_thread_flag(child, TIF_SINGLESTEP);
135
136         oflags = regs->flags;
137
138         /* Set TF on the kernel stack.. */
139         regs->flags |= X86_EFLAGS_TF;
140
141         /*
142          * ..but if TF is changed by the instruction we will trace,
143          * don't mark it as being "us" that set it, so that we
144          * won't clear it by hand later.
145          *
146          * Note that if we don't actually execute the popf because
147          * of a signal arriving right now or suchlike, we will lose
148          * track of the fact that it really was "us" that set it.
149          */
150         if (is_setting_trap_flag(child, regs)) {
151                 clear_tsk_thread_flag(child, TIF_FORCED_TF);
152                 return 0;
153         }
154
155         /*
156          * If TF was already set, check whether it was us who set it.
157          * If not, we should never attempt a block step.
158          */
159         if (oflags & X86_EFLAGS_TF)
160                 return test_tsk_thread_flag(child, TIF_FORCED_TF);
161
162         set_tsk_thread_flag(child, TIF_FORCED_TF);
163
164         return 1;
165 }
166
167 void set_task_blockstep(struct task_struct *task, bool on)
168 {
169         unsigned long debugctl;
170
171         /*
172          * Ensure irq/preemption can't change debugctl in between.
173          * Note also that both TIF_BLOCKSTEP and debugctl should
174          * be changed atomically wrt preemption.
175          *
176          * NOTE: this means that set/clear TIF_BLOCKSTEP is only safe if
177          * task is current or it can't be running, otherwise we can race
178          * with __switch_to_xtra(). We rely on ptrace_freeze_traced() but
179          * PTRACE_KILL is not safe.
180          */
181         local_irq_disable();
182         debugctl = get_debugctlmsr();
183         if (on) {
184                 debugctl |= DEBUGCTLMSR_BTF;
185                 set_tsk_thread_flag(task, TIF_BLOCKSTEP);
186         } else {
187                 debugctl &= ~DEBUGCTLMSR_BTF;
188                 clear_tsk_thread_flag(task, TIF_BLOCKSTEP);
189         }
190         if (task == current)
191                 update_debugctlmsr(debugctl);
192         local_irq_enable();
193 }
194
195 /*
196  * Enable single or block step.
197  */
198 static void enable_step(struct task_struct *child, bool block)
199 {
200         /*
201          * Make sure block stepping (BTF) is not enabled unless it should be.
202          * Note that we don't try to worry about any is_setting_trap_flag()
203          * instructions after the first when using block stepping.
204          * So no one should try to use debugger block stepping in a program
205          * that uses user-mode single stepping itself.
206          */
207         if (enable_single_step(child) && block)
208                 set_task_blockstep(child, true);
209         else if (test_tsk_thread_flag(child, TIF_BLOCKSTEP))
210                 set_task_blockstep(child, false);
211 }
212
213 void user_enable_single_step(struct task_struct *child)
214 {
215         enable_step(child, 0);
216 }
217
218 void user_enable_block_step(struct task_struct *child)
219 {
220         enable_step(child, 1);
221 }
222
223 void user_disable_single_step(struct task_struct *child)
224 {
225         /*
226          * Make sure block stepping (BTF) is disabled.
227          */
228         if (test_tsk_thread_flag(child, TIF_BLOCKSTEP))
229                 set_task_blockstep(child, false);
230
231         /* Always clear TIF_SINGLESTEP... */
232         clear_tsk_thread_flag(child, TIF_SINGLESTEP);
233
234         /* But touch TF only if it was set by us.. */
235         if (test_and_clear_tsk_thread_flag(child, TIF_FORCED_TF))
236                 task_pt_regs(child)->flags &= ~X86_EFLAGS_TF;
237 }