GNU Linux-libre 4.14.254-gnu1
[releases.git] / arch / x86 / include / asm / thread_info.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /* thread_info.h: low-level thread information
3  *
4  * Copyright (C) 2002  David Howells (dhowells@redhat.com)
5  * - Incorporating suggestions made by Linus Torvalds and Dave Miller
6  */
7
8 #ifndef _ASM_X86_THREAD_INFO_H
9 #define _ASM_X86_THREAD_INFO_H
10
11 #include <linux/compiler.h>
12 #include <asm/page.h>
13 #include <asm/percpu.h>
14 #include <asm/types.h>
15
16 /*
17  * TOP_OF_KERNEL_STACK_PADDING is a number of unused bytes that we
18  * reserve at the top of the kernel stack.  We do it because of a nasty
19  * 32-bit corner case.  On x86_32, the hardware stack frame is
20  * variable-length.  Except for vm86 mode, struct pt_regs assumes a
21  * maximum-length frame.  If we enter from CPL 0, the top 8 bytes of
22  * pt_regs don't actually exist.  Ordinarily this doesn't matter, but it
23  * does in at least one case:
24  *
25  * If we take an NMI early enough in SYSENTER, then we can end up with
26  * pt_regs that extends above sp0.  On the way out, in the espfix code,
27  * we can read the saved SS value, but that value will be above sp0.
28  * Without this offset, that can result in a page fault.  (We are
29  * careful that, in this case, the value we read doesn't matter.)
30  *
31  * In vm86 mode, the hardware frame is much longer still, so add 16
32  * bytes to make room for the real-mode segments.
33  *
34  * x86_64 has a fixed-length stack frame.
35  */
36 #ifdef CONFIG_X86_32
37 # ifdef CONFIG_VM86
38 #  define TOP_OF_KERNEL_STACK_PADDING 16
39 # else
40 #  define TOP_OF_KERNEL_STACK_PADDING 8
41 # endif
42 #else
43 # define TOP_OF_KERNEL_STACK_PADDING 0
44 #endif
45
46 /*
47  * low level task data that entry.S needs immediate access to
48  * - this struct should fit entirely inside of one cache line
49  * - this struct shares the supervisor stack pages
50  */
51 #ifndef __ASSEMBLY__
52 struct task_struct;
53 #include <asm/cpufeature.h>
54 #include <linux/atomic.h>
55
56 struct thread_info {
57         unsigned long           flags;          /* low level flags */
58         u32                     status;         /* thread synchronous flags */
59 };
60
61 #define INIT_THREAD_INFO(tsk)                   \
62 {                                               \
63         .flags          = 0,                    \
64 }
65
66 #define init_stack              (init_thread_union.stack)
67
68 #else /* !__ASSEMBLY__ */
69
70 #include <asm/asm-offsets.h>
71
72 #endif
73
74 /*
75  * thread information flags
76  * - these are process state flags that various assembly files
77  *   may need to access
78  */
79 #define TIF_SYSCALL_TRACE       0       /* syscall trace active */
80 #define TIF_NOTIFY_RESUME       1       /* callback before returning to user */
81 #define TIF_SIGPENDING          2       /* signal pending */
82 #define TIF_NEED_RESCHED        3       /* rescheduling necessary */
83 #define TIF_SINGLESTEP          4       /* reenable singlestep on user return*/
84 #define TIF_SSBD                5       /* Speculative store bypass disable */
85 #define TIF_SYSCALL_EMU         6       /* syscall emulation active */
86 #define TIF_SYSCALL_AUDIT       7       /* syscall auditing active */
87 #define TIF_SECCOMP             8       /* secure computing */
88 #define TIF_SPEC_IB             9       /* Indirect branch speculation mitigation */
89 #define TIF_SPEC_FORCE_UPDATE   10      /* Force speculation MSR update in context switch */
90 #define TIF_USER_RETURN_NOTIFY  11      /* notify kernel of userspace return */
91 #define TIF_UPROBE              12      /* breakpointed or singlestepping */
92 #define TIF_PATCH_PENDING       13      /* pending live patching update */
93 #define TIF_NOCPUID             15      /* CPUID is not accessible in userland */
94 #define TIF_NOTSC               16      /* TSC is not accessible in userland */
95 #define TIF_IA32                17      /* IA32 compatibility process */
96 #define TIF_NOHZ                19      /* in adaptive nohz mode */
97 #define TIF_MEMDIE              20      /* is terminating due to OOM killer */
98 #define TIF_POLLING_NRFLAG      21      /* idle is polling for TIF_NEED_RESCHED */
99 #define TIF_IO_BITMAP           22      /* uses I/O bitmap */
100 #define TIF_FORCED_TF           24      /* true if TF in eflags artificially */
101 #define TIF_BLOCKSTEP           25      /* set when we want DEBUGCTLMSR_BTF */
102 #define TIF_LAZY_MMU_UPDATES    27      /* task is updating the mmu lazily */
103 #define TIF_SYSCALL_TRACEPOINT  28      /* syscall tracepoint instrumentation */
104 #define TIF_ADDR32              29      /* 32-bit address space on 64 bits */
105 #define TIF_X32                 30      /* 32-bit native x86-64 binary */
106 #define TIF_FSCHECK             31      /* Check FS is USER_DS on return */
107
108 #define _TIF_SYSCALL_TRACE      (1 << TIF_SYSCALL_TRACE)
109 #define _TIF_NOTIFY_RESUME      (1 << TIF_NOTIFY_RESUME)
110 #define _TIF_SIGPENDING         (1 << TIF_SIGPENDING)
111 #define _TIF_NEED_RESCHED       (1 << TIF_NEED_RESCHED)
112 #define _TIF_SINGLESTEP         (1 << TIF_SINGLESTEP)
113 #define _TIF_SSBD               (1 << TIF_SSBD)
114 #define _TIF_SYSCALL_EMU        (1 << TIF_SYSCALL_EMU)
115 #define _TIF_SYSCALL_AUDIT      (1 << TIF_SYSCALL_AUDIT)
116 #define _TIF_SECCOMP            (1 << TIF_SECCOMP)
117 #define _TIF_SPEC_IB            (1 << TIF_SPEC_IB)
118 #define _TIF_SPEC_FORCE_UPDATE  (1 << TIF_SPEC_FORCE_UPDATE)
119 #define _TIF_USER_RETURN_NOTIFY (1 << TIF_USER_RETURN_NOTIFY)
120 #define _TIF_UPROBE             (1 << TIF_UPROBE)
121 #define _TIF_PATCH_PENDING      (1 << TIF_PATCH_PENDING)
122 #define _TIF_NOCPUID            (1 << TIF_NOCPUID)
123 #define _TIF_NOTSC              (1 << TIF_NOTSC)
124 #define _TIF_IA32               (1 << TIF_IA32)
125 #define _TIF_NOHZ               (1 << TIF_NOHZ)
126 #define _TIF_POLLING_NRFLAG     (1 << TIF_POLLING_NRFLAG)
127 #define _TIF_IO_BITMAP          (1 << TIF_IO_BITMAP)
128 #define _TIF_FORCED_TF          (1 << TIF_FORCED_TF)
129 #define _TIF_BLOCKSTEP          (1 << TIF_BLOCKSTEP)
130 #define _TIF_LAZY_MMU_UPDATES   (1 << TIF_LAZY_MMU_UPDATES)
131 #define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT)
132 #define _TIF_ADDR32             (1 << TIF_ADDR32)
133 #define _TIF_X32                (1 << TIF_X32)
134 #define _TIF_FSCHECK            (1 << TIF_FSCHECK)
135
136 /*
137  * work to do in syscall_trace_enter().  Also includes TIF_NOHZ for
138  * enter_from_user_mode()
139  */
140 #define _TIF_WORK_SYSCALL_ENTRY \
141         (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | _TIF_SYSCALL_AUDIT |   \
142          _TIF_SECCOMP | _TIF_SYSCALL_TRACEPOINT |       \
143          _TIF_NOHZ)
144
145 /* work to do on any return to user space */
146 #define _TIF_ALLWORK_MASK                                               \
147         (_TIF_SYSCALL_TRACE | _TIF_NOTIFY_RESUME | _TIF_SIGPENDING |    \
148          _TIF_NEED_RESCHED | _TIF_SINGLESTEP | _TIF_SYSCALL_EMU |       \
149          _TIF_SYSCALL_AUDIT | _TIF_USER_RETURN_NOTIFY | _TIF_UPROBE |   \
150          _TIF_PATCH_PENDING | _TIF_NOHZ | _TIF_SYSCALL_TRACEPOINT |     \
151          _TIF_FSCHECK)
152
153 /* flags to check in __switch_to() */
154 #define _TIF_WORK_CTXSW_BASE                                            \
155         (_TIF_IO_BITMAP|_TIF_NOCPUID|_TIF_NOTSC|_TIF_BLOCKSTEP|         \
156          _TIF_SSBD | _TIF_SPEC_FORCE_UPDATE)
157
158 /*
159  * Avoid calls to __switch_to_xtra() on UP as STIBP is not evaluated.
160  */
161 #ifdef CONFIG_SMP
162 # define _TIF_WORK_CTXSW        (_TIF_WORK_CTXSW_BASE | _TIF_SPEC_IB)
163 #else
164 # define _TIF_WORK_CTXSW        (_TIF_WORK_CTXSW_BASE)
165 #endif
166
167 #define _TIF_WORK_CTXSW_PREV (_TIF_WORK_CTXSW|_TIF_USER_RETURN_NOTIFY)
168 #define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW)
169
170 #define STACK_WARN              (THREAD_SIZE/8)
171
172 /*
173  * macros/functions for gaining access to the thread information structure
174  *
175  * preempt_count needs to be 1 initially, until the scheduler is functional.
176  */
177 #ifndef __ASSEMBLY__
178
179 /*
180  * Walks up the stack frames to make sure that the specified object is
181  * entirely contained by a single stack frame.
182  *
183  * Returns:
184  *      GOOD_FRAME      if within a frame
185  *      BAD_STACK       if placed across a frame boundary (or outside stack)
186  *      NOT_STACK       unable to determine (no frame pointers, etc)
187  */
188 static inline int arch_within_stack_frames(const void * const stack,
189                                            const void * const stackend,
190                                            const void *obj, unsigned long len)
191 {
192 #if defined(CONFIG_FRAME_POINTER)
193         const void *frame = NULL;
194         const void *oldframe;
195
196         oldframe = __builtin_frame_address(1);
197         if (oldframe)
198                 frame = __builtin_frame_address(2);
199         /*
200          * low ----------------------------------------------> high
201          * [saved bp][saved ip][args][local vars][saved bp][saved ip]
202          *                     ^----------------^
203          *               allow copies only within here
204          */
205         while (stack <= frame && frame < stackend) {
206                 /*
207                  * If obj + len extends past the last frame, this
208                  * check won't pass and the next frame will be 0,
209                  * causing us to bail out and correctly report
210                  * the copy as invalid.
211                  */
212                 if (obj + len <= frame)
213                         return obj >= oldframe + 2 * sizeof(void *) ?
214                                 GOOD_FRAME : BAD_STACK;
215                 oldframe = frame;
216                 frame = *(const void * const *)frame;
217         }
218         return BAD_STACK;
219 #else
220         return NOT_STACK;
221 #endif
222 }
223
224 #else /* !__ASSEMBLY__ */
225
226 #ifdef CONFIG_X86_64
227 # define cpu_current_top_of_stack (cpu_tss_rw + TSS_sp1)
228 #endif
229
230 #endif
231
232 /*
233  * Thread-synchronous status.
234  *
235  * This is different from the flags in that nobody else
236  * ever touches our thread-synchronous status, so we don't
237  * have to worry about atomic accesses.
238  */
239 #define TS_COMPAT               0x0002  /* 32bit syscall active (64BIT)*/
240
241 #ifndef __ASSEMBLY__
242 #ifdef CONFIG_COMPAT
243 #define TS_I386_REGS_POKED      0x0004  /* regs poked by 32-bit ptracer */
244 #define TS_COMPAT_RESTART       0x0008
245
246 #define arch_set_restart_data   arch_set_restart_data
247
248 static inline void arch_set_restart_data(struct restart_block *restart)
249 {
250         struct thread_info *ti = current_thread_info();
251         if (ti->status & TS_COMPAT)
252                 ti->status |= TS_COMPAT_RESTART;
253         else
254                 ti->status &= ~TS_COMPAT_RESTART;
255 }
256 #endif
257
258 #ifdef CONFIG_X86_32
259 #define in_ia32_syscall() true
260 #else
261 #define in_ia32_syscall() (IS_ENABLED(CONFIG_IA32_EMULATION) && \
262                            current_thread_info()->status & TS_COMPAT)
263 #endif
264
265 /*
266  * Force syscall return via IRET by making it look as if there was
267  * some work pending. IRET is our most capable (but slowest) syscall
268  * return path, which is able to restore modified SS, CS and certain
269  * EFLAGS values that other (fast) syscall return instructions
270  * are not able to restore properly.
271  */
272 #define force_iret() set_thread_flag(TIF_NOTIFY_RESUME)
273
274 extern void arch_task_cache_init(void);
275 extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
276 extern void arch_release_task_struct(struct task_struct *tsk);
277 extern void arch_setup_new_exec(void);
278 #define arch_setup_new_exec arch_setup_new_exec
279 #endif  /* !__ASSEMBLY__ */
280
281 #endif /* _ASM_X86_THREAD_INFO_H */