arch/sh/boards/mach-sdk7786/setup.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Renesas Technology Europe SDK7786 Support.
   4  *
   5  * Copyright (C) 2010  Matt Fleming
   6  * Copyright (C) 2010  Paul Mundt
   7  */
   8 #include <linux/init.h>
   9 #include <linux/platform_device.h>
  10 #include <linux/io.h>
  11 #include <linux/regulator/fixed.h>
  12 #include <linux/regulator/machine.h>
  13 #include <linux/smsc911x.h>
  14 #include <linux/i2c.h>
  15 #include <linux/irq.h>
  16 #include <linux/clk.h>
  17 #include <linux/clkdev.h>
  18 #include <mach/fpga.h>
  19 #include <mach/irq.h>
  20 #include <asm/machvec.h>
  21 #include <asm/heartbeat.h>
  22 #include <linux/sizes.h>
  23 #include <asm/clock.h>
  24 #include <asm/reboot.h>
  25 #include <asm/smp-ops.h>
  26
  27 static struct resource heartbeat_resource = {
  28         .start          = 0x07fff8b0,
  29         .end            = 0x07fff8b0 + sizeof(u16) - 1,
  30         .flags          = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
  31 };
  32
  33 static struct platform_device heartbeat_device = {
  34         .name           = "heartbeat",
  35         .id             = -1,
  36         .num_resources  = 1,
  37         .resource       = &heartbeat_resource,
  38 };
  39
  40 /* Dummy supplies, where voltage doesn't matter */
  41 static struct regulator_consumer_supply dummy_supplies[] = {
  42         REGULATOR_SUPPLY("vddvario", "smsc911x"),
  43         REGULATOR_SUPPLY("vdd33a", "smsc911x"),
  44 };
  45
  46 static struct resource smsc911x_resources[] = {
  47         [0] = {
  48                 .name           = "smsc911x-memory",
  49                 .start          = 0x07ffff00,
  50                 .end            = 0x07ffff00 + SZ_256 - 1,
  51                 .flags          = IORESOURCE_MEM,
  52         },
  53         [1] = {
  54                 .name           = "smsc911x-irq",
  55                 .start          = evt2irq(0x2c0),
  56                 .end            = evt2irq(0x2c0),
  57                 .flags          = IORESOURCE_IRQ,
  58         },
  59 };
  60
  61 static struct smsc911x_platform_config smsc911x_config = {
  62         .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
  63         .irq_type       = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
  64         .flags          = SMSC911X_USE_32BIT,
  65         .phy_interface  = PHY_INTERFACE_MODE_MII,
  66 };
  67
  68 static struct platform_device smsc911x_device = {
  69         .name           = "smsc911x",
  70         .id             = -1,
  71         .num_resources  = ARRAY_SIZE(smsc911x_resources),
  72         .resource       = smsc911x_resources,
  73         .dev = {
  74                 .platform_data = &smsc911x_config,
  75         },
  76 };
  77
  78 static struct resource smbus_fpga_resource = {
  79         .start          = 0x07fff9e0,
  80         .end            = 0x07fff9e0 + SZ_32 - 1,
  81         .flags          = IORESOURCE_MEM,
  82 };
  83
  84 static struct platform_device smbus_fpga_device = {
  85         .name           = "i2c-sdk7786",
  86         .id             = 0,
  87         .num_resources  = 1,
  88         .resource       = &smbus_fpga_resource,
  89 };
  90
  91 static struct resource smbus_pcie_resource = {
  92         .start          = 0x07fffc30,
  93         .end            = 0x07fffc30 + SZ_32 - 1,
  94         .flags          = IORESOURCE_MEM,
  95 };
  96
  97 static struct platform_device smbus_pcie_device = {
  98         .name           = "i2c-sdk7786",
  99         .id             = 1,
 100         .num_resources  = 1,
 101         .resource       = &smbus_pcie_resource,
 102 };
 103
 104 static struct i2c_board_info __initdata sdk7786_i2c_devices[] = {
 105         {
 106                 I2C_BOARD_INFO("max6900", 0x68),
 107         },
 108 };
 109
 110 static struct platform_device *sh7786_devices[] __initdata = {
 111         &heartbeat_device,
 112         &smsc911x_device,
 113         &smbus_fpga_device,
 114         &smbus_pcie_device,
 115 };
 116
 117 static int sdk7786_i2c_setup(void)
 118 {
 119         unsigned int tmp;
 120
 121         /*
 122          * Hand over I2C control to the FPGA.
 123          */
 124         tmp = fpga_read_reg(SBCR);
 125         tmp &= ~SCBR_I2CCEN;
 126         tmp |= SCBR_I2CMEN;
 127         fpga_write_reg(tmp, SBCR);
 128
 129         return i2c_register_board_info(0, sdk7786_i2c_devices,
 130                                        ARRAY_SIZE(sdk7786_i2c_devices));
 131 }
 132
 133 static int __init sdk7786_devices_setup(void)
 134 {
 135         int ret;
 136
 137         ret = platform_add_devices(sh7786_devices, ARRAY_SIZE(sh7786_devices));
 138         if (unlikely(ret != 0))
 139                 return ret;
 140
 141         return sdk7786_i2c_setup();
 142 }
 143 device_initcall(sdk7786_devices_setup);
 144
 145 static int sdk7786_mode_pins(void)
 146 {
 147         return fpga_read_reg(MODSWR);
 148 }
 149
 150 /*
 151  * FPGA-driven PCIe clocks
 152  *
 153  * Historically these include the oscillator, clock B (slots 2/3/4) and
 154  * clock A (slot 1 and the CPU clock). Newer revs of the PCB shove
 155  * everything under a single PCIe clocks enable bit that happens to map
 156  * to the same bit position as the oscillator bit for earlier FPGA
 157  * versions.
 158  *
 159  * Given that the legacy clocks have the side-effect of shutting the CPU
 160  * off through the FPGA along with the PCI slots, we simply leave them in
 161  * their initial state and don't bother registering them with the clock
 162  * framework.
 163  */
 164 static int sdk7786_pcie_clk_enable(struct clk *clk)
 165 {
 166         fpga_write_reg(fpga_read_reg(PCIECR) | PCIECR_CLKEN, PCIECR);
 167         return 0;
 168 }
 169
 170 static void sdk7786_pcie_clk_disable(struct clk *clk)
 171 {
 172         fpga_write_reg(fpga_read_reg(PCIECR) & ~PCIECR_CLKEN, PCIECR);
 173 }
 174
 175 static struct sh_clk_ops sdk7786_pcie_clk_ops = {
 176         .enable         = sdk7786_pcie_clk_enable,
 177         .disable        = sdk7786_pcie_clk_disable,
 178 };
 179
 180 static struct clk sdk7786_pcie_clk = {
 181         .ops            = &sdk7786_pcie_clk_ops,
 182 };
 183
 184 static struct clk_lookup sdk7786_pcie_cl = {
 185         .con_id         = "pcie_plat_clk",
 186         .clk            = &sdk7786_pcie_clk,
 187 };
 188
 189 static int sdk7786_clk_init(void)
 190 {
 191         struct clk *clk;
 192         int ret;
 193
 194         /*
 195          * Only handle the EXTAL case, anyone interfacing a crystal
 196          * resonator will need to provide their own input clock.
 197          */
 198         if (test_mode_pin(MODE_PIN9))
 199                 return -EINVAL;
 200
 201         clk = clk_get(NULL, "extal");
 202         if (IS_ERR(clk))
 203                 return PTR_ERR(clk);
 204         ret = clk_set_rate(clk, 33333333);
 205         clk_put(clk);
 206
 207         /*
 208          * Setup the FPGA clocks.
 209          */
 210         ret = clk_register(&sdk7786_pcie_clk);
 211         if (unlikely(ret)) {
 212                 pr_err("FPGA clock registration failed\n");
 213                 return ret;
 214         }
 215
 216         clkdev_add(&sdk7786_pcie_cl);
 217
 218         return 0;
 219 }
 220
 221 static void sdk7786_restart(char *cmd)
 222 {
 223         fpga_write_reg(0xa5a5, SRSTR);
 224 }
 225
 226 static void sdk7786_power_off(void)
 227 {
 228         fpga_write_reg(fpga_read_reg(PWRCR) | PWRCR_PDWNREQ, PWRCR);
 229
 230         /*
 231          * It can take up to 20us for the R8C to do its job, back off and
 232          * wait a bit until we've been shut off. Even though newer FPGA
 233          * versions don't set the ACK bit, the latency issue remains.
 234          */
 235         while ((fpga_read_reg(PWRCR) & PWRCR_PDWNACK) == 0)
 236                 cpu_sleep();
 237 }
 238
 239 /* Initialize the board */
 240 static void __init sdk7786_setup(char **cmdline_p)
 241 {
 242         pr_info("Renesas Technology Europe SDK7786 support:\n");
 243
 244         regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 245
 246         sdk7786_fpga_init();
 247         sdk7786_nmi_init();
 248
 249         pr_info("\tPCB revision:\t%d\n", fpga_read_reg(PCBRR) & 0xf);
 250
 251         machine_ops.restart = sdk7786_restart;
 252         pm_power_off = sdk7786_power_off;
 253
 254         register_smp_ops(&shx3_smp_ops);
 255 }
 256
 257 /*
 258  * The Machine Vector
 259  */
 260 static struct sh_machine_vector mv_sdk7786 __initmv = {
 261         .mv_name                = "SDK7786",
 262         .mv_setup               = sdk7786_setup,
 263         .mv_mode_pins           = sdk7786_mode_pins,
 264         .mv_clk_init            = sdk7786_clk_init,
 265         .mv_init_irq            = sdk7786_init_irq,
 266 };