1 // SPDX-License-Identifier: GPL-2.0
3 * General Purpose functions for the global management of the
4 * Communication Processor Module.
5 * Copyright (c) 1997 Dan error_act (dmalek@jlc.net)
7 * In addition to the individual control of the communication
8 * channels, there are a few functions that globally affect the
9 * communication processor.
11 * Buffer descriptors must be allocated from the dual ported memory
12 * space. The allocator for that is here. When the communication
13 * process is reset, we reclaim the memory available. There is
14 * currently no deallocator for this memory.
15 * The amount of space available is platform dependent. On the
16 * MBX, the EPPC software loads additional microcode into the
17 * communication processor, and uses some of the DP ram for this
18 * purpose. Current, the first 512 bytes and the last 256 bytes of
19 * memory are used. Right now I am conservative and only use the
20 * memory that can never be used for microcode. If there are
21 * applications that require more DP ram, we can expand the boundaries
22 * but then we have to be careful of any downloaded microcode.
24 #include <linux/errno.h>
25 #include <linux/sched.h>
26 #include <linux/kernel.h>
27 #include <linux/dma-mapping.h>
28 #include <linux/param.h>
29 #include <linux/string.h>
31 #include <linux/interrupt.h>
32 #include <linux/irq.h>
33 #include <linux/module.h>
34 #include <linux/spinlock.h>
35 #include <linux/slab.h>
37 #include <asm/pgtable.h>
38 #include <asm/8xx_immap.h>
41 #include <asm/rheap.h>
45 #include <asm/fs_pd.h>
47 #ifdef CONFIG_8xx_GPIO
48 #include <linux/of_gpio.h>
51 #define CPM_MAP_SIZE (0x4000)
53 cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */
54 immap_t __iomem *mpc8xx_immr;
55 static cpic8xx_t __iomem *cpic_reg;
57 static struct irq_domain *cpm_pic_host;
59 static void cpm_mask_irq(struct irq_data *d)
61 unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);
63 clrbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec));
66 static void cpm_unmask_irq(struct irq_data *d)
68 unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);
70 setbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec));
73 static void cpm_end_irq(struct irq_data *d)
75 unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);
77 out_be32(&cpic_reg->cpic_cisr, (1 << cpm_vec));
80 static struct irq_chip cpm_pic = {
82 .irq_mask = cpm_mask_irq,
83 .irq_unmask = cpm_unmask_irq,
84 .irq_eoi = cpm_end_irq,
91 /* Get the vector by setting the ACK bit and then reading
94 out_be16(&cpic_reg->cpic_civr, 1);
95 cpm_vec = in_be16(&cpic_reg->cpic_civr);
98 return irq_linear_revmap(cpm_pic_host, cpm_vec);
101 static int cpm_pic_host_map(struct irq_domain *h, unsigned int virq,
104 pr_debug("cpm_pic_host_map(%d, 0x%lx)\n", virq, hw);
106 irq_set_status_flags(virq, IRQ_LEVEL);
107 irq_set_chip_and_handler(virq, &cpm_pic, handle_fasteoi_irq);
111 /* The CPM can generate the error interrupt when there is a race condition
112 * between generating and masking interrupts. All we have to do is ACK it
113 * and return. This is a no-op function so we don't need any special
114 * tests in the interrupt handler.
116 static irqreturn_t cpm_error_interrupt(int irq, void *dev)
121 static struct irqaction cpm_error_irqaction = {
122 .handler = cpm_error_interrupt,
123 .flags = IRQF_NO_THREAD,
127 static const struct irq_domain_ops cpm_pic_host_ops = {
128 .map = cpm_pic_host_map,
131 unsigned int cpm_pic_init(void)
133 struct device_node *np = NULL;
135 unsigned int sirq = 0, hwirq, eirq;
138 pr_debug("cpm_pic_init\n");
140 np = of_find_compatible_node(NULL, NULL, "fsl,cpm1-pic");
142 np = of_find_compatible_node(NULL, "cpm-pic", "CPM");
144 printk(KERN_ERR "CPM PIC init: can not find cpm-pic node\n");
148 ret = of_address_to_resource(np, 0, &res);
152 cpic_reg = ioremap(res.start, resource_size(&res));
153 if (cpic_reg == NULL)
156 sirq = irq_of_parse_and_map(np, 0);
160 /* Initialize the CPM interrupt controller. */
161 hwirq = (unsigned int)virq_to_hw(sirq);
162 out_be32(&cpic_reg->cpic_cicr,
163 (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
164 ((hwirq/2) << 13) | CICR_HP_MASK);
166 out_be32(&cpic_reg->cpic_cimr, 0);
168 cpm_pic_host = irq_domain_add_linear(np, 64, &cpm_pic_host_ops, NULL);
169 if (cpm_pic_host == NULL) {
170 printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
175 /* Install our own error handler. */
176 np = of_find_compatible_node(NULL, NULL, "fsl,cpm1");
178 np = of_find_node_by_type(NULL, "cpm");
180 printk(KERN_ERR "CPM PIC init: can not find cpm node\n");
184 eirq = irq_of_parse_and_map(np, 0);
188 if (setup_irq(eirq, &cpm_error_irqaction))
189 printk(KERN_ERR "Could not allocate CPM error IRQ!");
191 setbits32(&cpic_reg->cpic_cicr, CICR_IEN);
198 void __init cpm_reset(void)
200 sysconf8xx_t __iomem *siu_conf;
202 mpc8xx_immr = ioremap(get_immrbase(), 0x4000);
204 printk(KERN_CRIT "Could not map IMMR\n");
208 cpmp = &mpc8xx_immr->im_cpm;
210 #ifndef CONFIG_PPC_EARLY_DEBUG_CPM
213 out_be16(&cpmp->cp_cpcr, CPM_CR_RST | CPM_CR_FLG);
217 while (in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG);
220 #ifdef CONFIG_UCODE_PATCH
221 cpm_load_patch(cpmp);
224 /* Set SDMA Bus Request priority 5.
225 * On 860T, this also enables FEC priority 6. I am not sure
226 * this is what we really want for some applications, but the
227 * manual recommends it.
228 * Bit 25, FAM can also be set to use FEC aggressive mode (860T).
230 siu_conf = immr_map(im_siu_conf);
231 if ((mfspr(SPRN_IMMR) & 0xffff) == 0x0900) /* MPC885 */
232 out_be32(&siu_conf->sc_sdcr, 0x40);
234 out_be32(&siu_conf->sc_sdcr, 1);
235 immr_unmap(siu_conf);
238 static DEFINE_SPINLOCK(cmd_lock);
240 #define MAX_CR_CMD_LOOPS 10000
242 int cpm_command(u32 command, u8 opcode)
247 if (command & 0xffffff0f)
250 spin_lock_irqsave(&cmd_lock, flags);
253 out_be16(&cpmp->cp_cpcr, command | CPM_CR_FLG | (opcode << 8));
254 for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
255 if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
258 printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
261 spin_unlock_irqrestore(&cmd_lock, flags);
264 EXPORT_SYMBOL(cpm_command);
266 /* Set a baud rate generator. This needs lots of work. There are
267 * four BRGs, any of which can be wired to any channel.
268 * The internal baud rate clock is the system clock divided by 16.
269 * This assumes the baudrate is 16x oversampled by the uart.
271 #define BRG_INT_CLK (get_brgfreq())
272 #define BRG_UART_CLK (BRG_INT_CLK/16)
273 #define BRG_UART_CLK_DIV16 (BRG_UART_CLK/16)
276 cpm_setbrg(uint brg, uint rate)
280 /* This is good enough to get SMCs running.....
282 bp = &cpmp->cp_brgc1;
284 /* The BRG has a 12-bit counter. For really slow baud rates (or
285 * really fast processors), we may have to further divide by 16.
287 if (((BRG_UART_CLK / rate) - 1) < 4096)
288 out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
290 out_be32(bp, (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) |
291 CPM_BRG_EN | CPM_BRG_DIV16);
294 struct cpm_ioport16 {
295 __be16 dir, par, odr_sor, dat, intr;
299 struct cpm_ioport32b {
300 __be32 dir, par, odr, dat;
303 struct cpm_ioport32e {
304 __be32 dir, par, sor, odr, dat;
307 static void cpm1_set_pin32(int port, int pin, int flags)
309 struct cpm_ioport32e __iomem *iop;
310 pin = 1 << (31 - pin);
312 if (port == CPM_PORTB)
313 iop = (struct cpm_ioport32e __iomem *)
314 &mpc8xx_immr->im_cpm.cp_pbdir;
316 iop = (struct cpm_ioport32e __iomem *)
317 &mpc8xx_immr->im_cpm.cp_pedir;
319 if (flags & CPM_PIN_OUTPUT)
320 setbits32(&iop->dir, pin);
322 clrbits32(&iop->dir, pin);
324 if (!(flags & CPM_PIN_GPIO))
325 setbits32(&iop->par, pin);
327 clrbits32(&iop->par, pin);
329 if (port == CPM_PORTB) {
330 if (flags & CPM_PIN_OPENDRAIN)
331 setbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
333 clrbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
336 if (port == CPM_PORTE) {
337 if (flags & CPM_PIN_SECONDARY)
338 setbits32(&iop->sor, pin);
340 clrbits32(&iop->sor, pin);
342 if (flags & CPM_PIN_OPENDRAIN)
343 setbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
345 clrbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
349 static void cpm1_set_pin16(int port, int pin, int flags)
351 struct cpm_ioport16 __iomem *iop =
352 (struct cpm_ioport16 __iomem *)&mpc8xx_immr->im_ioport;
354 pin = 1 << (15 - pin);
359 if (flags & CPM_PIN_OUTPUT)
360 setbits16(&iop->dir, pin);
362 clrbits16(&iop->dir, pin);
364 if (!(flags & CPM_PIN_GPIO))
365 setbits16(&iop->par, pin);
367 clrbits16(&iop->par, pin);
369 if (port == CPM_PORTA) {
370 if (flags & CPM_PIN_OPENDRAIN)
371 setbits16(&iop->odr_sor, pin);
373 clrbits16(&iop->odr_sor, pin);
375 if (port == CPM_PORTC) {
376 if (flags & CPM_PIN_SECONDARY)
377 setbits16(&iop->odr_sor, pin);
379 clrbits16(&iop->odr_sor, pin);
380 if (flags & CPM_PIN_FALLEDGE)
381 setbits16(&iop->intr, pin);
383 clrbits16(&iop->intr, pin);
387 void cpm1_set_pin(enum cpm_port port, int pin, int flags)
389 if (port == CPM_PORTB || port == CPM_PORTE)
390 cpm1_set_pin32(port, pin, flags);
392 cpm1_set_pin16(port, pin, flags);
395 int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
403 {CPM_CLK_SCC1, CPM_BRG1, 0},
404 {CPM_CLK_SCC1, CPM_BRG2, 1},
405 {CPM_CLK_SCC1, CPM_BRG3, 2},
406 {CPM_CLK_SCC1, CPM_BRG4, 3},
407 {CPM_CLK_SCC1, CPM_CLK1, 4},
408 {CPM_CLK_SCC1, CPM_CLK2, 5},
409 {CPM_CLK_SCC1, CPM_CLK3, 6},
410 {CPM_CLK_SCC1, CPM_CLK4, 7},
412 {CPM_CLK_SCC2, CPM_BRG1, 0},
413 {CPM_CLK_SCC2, CPM_BRG2, 1},
414 {CPM_CLK_SCC2, CPM_BRG3, 2},
415 {CPM_CLK_SCC2, CPM_BRG4, 3},
416 {CPM_CLK_SCC2, CPM_CLK1, 4},
417 {CPM_CLK_SCC2, CPM_CLK2, 5},
418 {CPM_CLK_SCC2, CPM_CLK3, 6},
419 {CPM_CLK_SCC2, CPM_CLK4, 7},
421 {CPM_CLK_SCC3, CPM_BRG1, 0},
422 {CPM_CLK_SCC3, CPM_BRG2, 1},
423 {CPM_CLK_SCC3, CPM_BRG3, 2},
424 {CPM_CLK_SCC3, CPM_BRG4, 3},
425 {CPM_CLK_SCC3, CPM_CLK5, 4},
426 {CPM_CLK_SCC3, CPM_CLK6, 5},
427 {CPM_CLK_SCC3, CPM_CLK7, 6},
428 {CPM_CLK_SCC3, CPM_CLK8, 7},
430 {CPM_CLK_SCC4, CPM_BRG1, 0},
431 {CPM_CLK_SCC4, CPM_BRG2, 1},
432 {CPM_CLK_SCC4, CPM_BRG3, 2},
433 {CPM_CLK_SCC4, CPM_BRG4, 3},
434 {CPM_CLK_SCC4, CPM_CLK5, 4},
435 {CPM_CLK_SCC4, CPM_CLK6, 5},
436 {CPM_CLK_SCC4, CPM_CLK7, 6},
437 {CPM_CLK_SCC4, CPM_CLK8, 7},
439 {CPM_CLK_SMC1, CPM_BRG1, 0},
440 {CPM_CLK_SMC1, CPM_BRG2, 1},
441 {CPM_CLK_SMC1, CPM_BRG3, 2},
442 {CPM_CLK_SMC1, CPM_BRG4, 3},
443 {CPM_CLK_SMC1, CPM_CLK1, 4},
444 {CPM_CLK_SMC1, CPM_CLK2, 5},
445 {CPM_CLK_SMC1, CPM_CLK3, 6},
446 {CPM_CLK_SMC1, CPM_CLK4, 7},
448 {CPM_CLK_SMC2, CPM_BRG1, 0},
449 {CPM_CLK_SMC2, CPM_BRG2, 1},
450 {CPM_CLK_SMC2, CPM_BRG3, 2},
451 {CPM_CLK_SMC2, CPM_BRG4, 3},
452 {CPM_CLK_SMC2, CPM_CLK5, 4},
453 {CPM_CLK_SMC2, CPM_CLK6, 5},
454 {CPM_CLK_SMC2, CPM_CLK7, 6},
455 {CPM_CLK_SMC2, CPM_CLK8, 7},
460 reg = &mpc8xx_immr->im_cpm.cp_sicr;
465 reg = &mpc8xx_immr->im_cpm.cp_sicr;
470 reg = &mpc8xx_immr->im_cpm.cp_sicr;
475 reg = &mpc8xx_immr->im_cpm.cp_sicr;
480 reg = &mpc8xx_immr->im_cpm.cp_simode;
485 reg = &mpc8xx_immr->im_cpm.cp_simode;
490 printk(KERN_ERR "cpm1_clock_setup: invalid clock target\n");
494 for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
495 if (clk_map[i][0] == target && clk_map[i][1] == clock) {
496 bits = clk_map[i][2];
501 if (i == ARRAY_SIZE(clk_map)) {
502 printk(KERN_ERR "cpm1_clock_setup: invalid clock combination\n");
509 if (reg == &mpc8xx_immr->im_cpm.cp_sicr) {
510 if (mode == CPM_CLK_RTX) {
513 } else if (mode == CPM_CLK_RX) {
519 out_be32(reg, (in_be32(reg) & ~mask) | bits);
525 * GPIO LIB API implementation
527 #ifdef CONFIG_8xx_GPIO
529 struct cpm1_gpio16_chip {
530 struct of_mm_gpio_chip mm_gc;
533 /* shadowed data register to clear/set bits safely */
536 /* IRQ associated with Pins when relevant */
540 static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc)
542 struct cpm1_gpio16_chip *cpm1_gc =
543 container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc);
544 struct cpm_ioport16 __iomem *iop = mm_gc->regs;
546 cpm1_gc->cpdata = in_be16(&iop->dat);
549 static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio)
551 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
552 struct cpm_ioport16 __iomem *iop = mm_gc->regs;
555 pin_mask = 1 << (15 - gpio);
557 return !!(in_be16(&iop->dat) & pin_mask);
560 static void __cpm1_gpio16_set(struct of_mm_gpio_chip *mm_gc, u16 pin_mask,
563 struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
564 struct cpm_ioport16 __iomem *iop = mm_gc->regs;
567 cpm1_gc->cpdata |= pin_mask;
569 cpm1_gc->cpdata &= ~pin_mask;
571 out_be16(&iop->dat, cpm1_gc->cpdata);
574 static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
576 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
577 struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
579 u16 pin_mask = 1 << (15 - gpio);
581 spin_lock_irqsave(&cpm1_gc->lock, flags);
583 __cpm1_gpio16_set(mm_gc, pin_mask, value);
585 spin_unlock_irqrestore(&cpm1_gc->lock, flags);
588 static int cpm1_gpio16_to_irq(struct gpio_chip *gc, unsigned int gpio)
590 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
591 struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
593 return cpm1_gc->irq[gpio] ? : -ENXIO;
596 static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
598 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
599 struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
600 struct cpm_ioport16 __iomem *iop = mm_gc->regs;
602 u16 pin_mask = 1 << (15 - gpio);
604 spin_lock_irqsave(&cpm1_gc->lock, flags);
606 setbits16(&iop->dir, pin_mask);
607 __cpm1_gpio16_set(mm_gc, pin_mask, val);
609 spin_unlock_irqrestore(&cpm1_gc->lock, flags);
614 static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
616 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
617 struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
618 struct cpm_ioport16 __iomem *iop = mm_gc->regs;
620 u16 pin_mask = 1 << (15 - gpio);
622 spin_lock_irqsave(&cpm1_gc->lock, flags);
624 clrbits16(&iop->dir, pin_mask);
626 spin_unlock_irqrestore(&cpm1_gc->lock, flags);
631 int cpm1_gpiochip_add16(struct device *dev)
633 struct device_node *np = dev->of_node;
634 struct cpm1_gpio16_chip *cpm1_gc;
635 struct of_mm_gpio_chip *mm_gc;
636 struct gpio_chip *gc;
639 cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
643 spin_lock_init(&cpm1_gc->lock);
645 if (!of_property_read_u16(np, "fsl,cpm1-gpio-irq-mask", &mask)) {
648 for (i = 0, j = 0; i < 16; i++)
649 if (mask & (1 << (15 - i)))
650 cpm1_gc->irq[i] = irq_of_parse_and_map(np, j++);
653 mm_gc = &cpm1_gc->mm_gc;
656 mm_gc->save_regs = cpm1_gpio16_save_regs;
658 gc->direction_input = cpm1_gpio16_dir_in;
659 gc->direction_output = cpm1_gpio16_dir_out;
660 gc->get = cpm1_gpio16_get;
661 gc->set = cpm1_gpio16_set;
662 gc->to_irq = cpm1_gpio16_to_irq;
664 gc->owner = THIS_MODULE;
666 return of_mm_gpiochip_add_data(np, mm_gc, cpm1_gc);
669 struct cpm1_gpio32_chip {
670 struct of_mm_gpio_chip mm_gc;
673 /* shadowed data register to clear/set bits safely */
677 static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
679 struct cpm1_gpio32_chip *cpm1_gc =
680 container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc);
681 struct cpm_ioport32b __iomem *iop = mm_gc->regs;
683 cpm1_gc->cpdata = in_be32(&iop->dat);
686 static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
688 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
689 struct cpm_ioport32b __iomem *iop = mm_gc->regs;
692 pin_mask = 1 << (31 - gpio);
694 return !!(in_be32(&iop->dat) & pin_mask);
697 static void __cpm1_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
700 struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
701 struct cpm_ioport32b __iomem *iop = mm_gc->regs;
704 cpm1_gc->cpdata |= pin_mask;
706 cpm1_gc->cpdata &= ~pin_mask;
708 out_be32(&iop->dat, cpm1_gc->cpdata);
711 static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
713 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
714 struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
716 u32 pin_mask = 1 << (31 - gpio);
718 spin_lock_irqsave(&cpm1_gc->lock, flags);
720 __cpm1_gpio32_set(mm_gc, pin_mask, value);
722 spin_unlock_irqrestore(&cpm1_gc->lock, flags);
725 static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
727 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
728 struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
729 struct cpm_ioport32b __iomem *iop = mm_gc->regs;
731 u32 pin_mask = 1 << (31 - gpio);
733 spin_lock_irqsave(&cpm1_gc->lock, flags);
735 setbits32(&iop->dir, pin_mask);
736 __cpm1_gpio32_set(mm_gc, pin_mask, val);
738 spin_unlock_irqrestore(&cpm1_gc->lock, flags);
743 static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
745 struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
746 struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
747 struct cpm_ioport32b __iomem *iop = mm_gc->regs;
749 u32 pin_mask = 1 << (31 - gpio);
751 spin_lock_irqsave(&cpm1_gc->lock, flags);
753 clrbits32(&iop->dir, pin_mask);
755 spin_unlock_irqrestore(&cpm1_gc->lock, flags);
760 int cpm1_gpiochip_add32(struct device *dev)
762 struct device_node *np = dev->of_node;
763 struct cpm1_gpio32_chip *cpm1_gc;
764 struct of_mm_gpio_chip *mm_gc;
765 struct gpio_chip *gc;
767 cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
771 spin_lock_init(&cpm1_gc->lock);
773 mm_gc = &cpm1_gc->mm_gc;
776 mm_gc->save_regs = cpm1_gpio32_save_regs;
778 gc->direction_input = cpm1_gpio32_dir_in;
779 gc->direction_output = cpm1_gpio32_dir_out;
780 gc->get = cpm1_gpio32_get;
781 gc->set = cpm1_gpio32_set;
783 gc->owner = THIS_MODULE;
785 return of_mm_gpiochip_add_data(np, mm_gc, cpm1_gc);
788 #endif /* CONFIG_8xx_GPIO */