1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * 64-bit pSeries and RS/6000 setup code.
5 * Copyright (C) 1995 Linus Torvalds
6 * Adapted from 'alpha' version by Gary Thomas
7 * Modified by Cort Dougan (cort@cs.nmt.edu)
8 * Modified by PPC64 Team, IBM Corp
12 * bootup setup stuff..
15 #include <linux/cpu.h>
16 #include <linux/errno.h>
17 #include <linux/sched.h>
18 #include <linux/kernel.h>
20 #include <linux/stddef.h>
21 #include <linux/unistd.h>
22 #include <linux/user.h>
23 #include <linux/tty.h>
24 #include <linux/major.h>
25 #include <linux/interrupt.h>
26 #include <linux/reboot.h>
27 #include <linux/init.h>
28 #include <linux/ioport.h>
29 #include <linux/console.h>
30 #include <linux/pci.h>
31 #include <linux/utsname.h>
32 #include <linux/adb.h>
33 #include <linux/export.h>
34 #include <linux/delay.h>
35 #include <linux/irq.h>
36 #include <linux/seq_file.h>
37 #include <linux/root_dev.h>
39 #include <linux/of_pci.h>
40 #include <linux/memblock.h>
41 #include <linux/swiotlb.h>
44 #include <asm/processor.h>
48 #include <asm/pci-bridge.h>
49 #include <asm/iommu.h>
51 #include <asm/machdep.h>
54 #include <asm/nvram.h>
58 #include <asm/ppc-pci.h>
59 #include <asm/i8259.h>
62 #include <asm/firmware.h>
65 #include <asm/plpar_wrappers.h>
66 #include <asm/kexec.h>
67 #include <asm/isa-bridge.h>
68 #include <asm/security_features.h>
69 #include <asm/asm-const.h>
71 #include <asm/swiotlb.h>
76 #include "../../../../drivers/pci/pci.h"
78 DEFINE_STATIC_KEY_FALSE(shared_processor);
79 EXPORT_SYMBOL(shared_processor);
83 unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT_4K);
84 EXPORT_SYMBOL(CMO_PageSize);
86 int fwnmi_active; /* TRUE if an FWNMI handler is present */
87 int ibm_nmi_interlock_token;
89 static void pSeries_show_cpuinfo(struct seq_file *m)
91 struct device_node *root;
92 const char *model = "";
94 root = of_find_node_by_path("/");
96 model = of_get_property(root, "model", NULL);
97 seq_printf(m, "machine\t\t: CHRP %s\n", model);
100 seq_printf(m, "MMU\t\t: Radix\n");
102 seq_printf(m, "MMU\t\t: Hash\n");
105 /* Initialize firmware assisted non-maskable interrupts if
106 * the firmware supports this feature.
108 static void __init fwnmi_init(void)
110 unsigned long system_reset_addr, machine_check_addr;
113 int nr_cpus = num_possible_cpus();
114 #ifdef CONFIG_PPC_BOOK3S_64
115 struct slb_entry *slb_ptr;
118 int ibm_nmi_register_token;
120 ibm_nmi_register_token = rtas_token("ibm,nmi-register");
121 if (ibm_nmi_register_token == RTAS_UNKNOWN_SERVICE)
124 ibm_nmi_interlock_token = rtas_token("ibm,nmi-interlock");
125 if (WARN_ON(ibm_nmi_interlock_token == RTAS_UNKNOWN_SERVICE))
128 /* If the kernel's not linked at zero we point the firmware at low
129 * addresses anyway, and use a trampoline to get to the real code. */
130 system_reset_addr = __pa(system_reset_fwnmi) - PHYSICAL_START;
131 machine_check_addr = __pa(machine_check_fwnmi) - PHYSICAL_START;
133 if (0 == rtas_call(ibm_nmi_register_token, 2, 1, NULL,
134 system_reset_addr, machine_check_addr))
138 * Allocate a chunk for per cpu buffer to hold rtas errorlog.
139 * It will be used in real mode mce handler, hence it needs to be
142 mce_data_buf = memblock_alloc_try_nid_raw(RTAS_ERROR_LOG_MAX * nr_cpus,
143 RTAS_ERROR_LOG_MAX, MEMBLOCK_LOW_LIMIT,
144 ppc64_rma_size, NUMA_NO_NODE);
146 panic("Failed to allocate %d bytes below %pa for MCE buffer\n",
147 RTAS_ERROR_LOG_MAX * nr_cpus, &ppc64_rma_size);
149 for_each_possible_cpu(i) {
150 paca_ptrs[i]->mce_data_buf = mce_data_buf +
151 (RTAS_ERROR_LOG_MAX * i);
154 #ifdef CONFIG_PPC_BOOK3S_64
155 if (!radix_enabled()) {
156 /* Allocate per cpu area to save old slb contents during MCE */
157 size = sizeof(struct slb_entry) * mmu_slb_size * nr_cpus;
158 slb_ptr = memblock_alloc_try_nid_raw(size,
159 sizeof(struct slb_entry), MEMBLOCK_LOW_LIMIT,
160 ppc64_rma_size, NUMA_NO_NODE);
162 panic("Failed to allocate %zu bytes below %pa for slb area\n",
163 size, &ppc64_rma_size);
165 for_each_possible_cpu(i)
166 paca_ptrs[i]->mce_faulty_slbs = slb_ptr + (mmu_slb_size * i);
171 static void pseries_8259_cascade(struct irq_desc *desc)
173 struct irq_chip *chip = irq_desc_get_chip(desc);
174 unsigned int cascade_irq = i8259_irq();
177 generic_handle_irq(cascade_irq);
179 chip->irq_eoi(&desc->irq_data);
182 static void __init pseries_setup_i8259_cascade(void)
184 struct device_node *np, *old, *found = NULL;
185 unsigned int cascade;
187 unsigned long intack = 0;
190 for_each_node_by_type(np, "interrupt-controller") {
191 if (of_device_is_compatible(np, "chrp,iic")) {
198 printk(KERN_DEBUG "pic: no ISA interrupt controller\n");
202 cascade = irq_of_parse_and_map(found, 0);
204 printk(KERN_ERR "pic: failed to map cascade interrupt");
207 pr_debug("pic: cascade mapped to irq %d\n", cascade);
209 for (old = of_node_get(found); old != NULL ; old = np) {
210 np = of_get_parent(old);
214 if (!of_node_name_eq(np, "pci"))
216 addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL);
219 naddr = of_n_addr_cells(np);
220 intack = addrp[naddr-1];
222 intack |= ((unsigned long)addrp[naddr-2]) << 32;
225 printk(KERN_DEBUG "pic: PCI 8259 intack at 0x%016lx\n", intack);
226 i8259_init(found, intack);
228 irq_set_chained_handler(cascade, pseries_8259_cascade);
231 static void __init pseries_init_irq(void)
233 /* Try using a XIVE if available, otherwise use a XICS */
234 if (!xive_spapr_init()) {
236 pseries_setup_i8259_cascade();
240 static void pseries_lpar_enable_pmcs(void)
242 unsigned long set, reset;
246 plpar_hcall_norets(H_PERFMON, set, reset);
249 static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *data)
251 struct of_reconfig_data *rd = data;
252 struct device_node *parent, *np = rd->dn;
257 case OF_RECONFIG_ATTACH_NODE:
258 parent = of_get_parent(np);
259 pdn = parent ? PCI_DN(parent) : NULL;
261 pci_add_device_node_info(pdn->phb, np);
265 case OF_RECONFIG_DETACH_NODE:
268 list_del(&pdn->list);
277 static struct notifier_block pci_dn_reconfig_nb = {
278 .notifier_call = pci_dn_reconfig_notifier,
281 struct kmem_cache *dtl_cache;
283 #ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
285 * Allocate space for the dispatch trace log for all possible cpus
286 * and register the buffers with the hypervisor. This is used for
287 * computing time stolen by the hypervisor.
289 static int alloc_dispatch_logs(void)
291 if (!firmware_has_feature(FW_FEATURE_SPLPAR))
297 alloc_dtl_buffers(0);
299 /* Register the DTL for the current (boot) cpu */
300 register_dtl_buffer(smp_processor_id());
304 #else /* !CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
305 static inline int alloc_dispatch_logs(void)
309 #endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
311 static int alloc_dispatch_log_kmem_cache(void)
313 void (*ctor)(void *) = get_dtl_cache_ctor();
315 dtl_cache = kmem_cache_create("dtl", DISPATCH_LOG_BYTES,
316 DISPATCH_LOG_BYTES, 0, ctor);
318 pr_warn("Failed to create dispatch trace log buffer cache\n");
319 pr_warn("Stolen time statistics will be unreliable\n");
323 return alloc_dispatch_logs();
325 machine_early_initcall(pseries, alloc_dispatch_log_kmem_cache);
327 DEFINE_PER_CPU(u64, idle_spurr_cycles);
328 DEFINE_PER_CPU(u64, idle_entry_purr_snap);
329 DEFINE_PER_CPU(u64, idle_entry_spurr_snap);
330 static void pseries_lpar_idle(void)
333 * Default handler to go into low thread priority and possibly
334 * low power mode by ceding processor to hypervisor
337 if (!prep_irq_for_idle())
340 /* Indicate to hypervisor that we are idle. */
341 pseries_idle_prolog();
344 * Yield the processor to the hypervisor. We return if
345 * an external interrupt occurs (which are driven prior
346 * to returning here) or if a prod occurs from another
347 * processor. When returning here, external interrupts
352 pseries_idle_epilog();
356 * Enable relocation on during exceptions. This has partition wide scope and
357 * may take a while to complete, if it takes longer than one second we will
358 * just give up rather than wasting any more time on this - if that turns out
359 * to ever be a problem in practice we can move this into a kernel thread to
360 * finish off the process later in boot.
362 bool pseries_enable_reloc_on_exc(void)
365 unsigned int delay, total_delay = 0;
368 rc = enable_reloc_on_exceptions();
369 if (!H_IS_LONG_BUSY(rc)) {
371 pr_info("Relocation on exceptions not"
374 } else if (rc != H_SUCCESS) {
375 pr_warn("Unable to enable relocation"
376 " on exceptions: %ld\n", rc);
382 delay = get_longbusy_msecs(rc);
383 total_delay += delay;
384 if (total_delay > 1000) {
385 pr_warn("Warning: Giving up waiting to enable "
386 "relocation on exceptions (%u msec)!\n",
394 EXPORT_SYMBOL(pseries_enable_reloc_on_exc);
396 void pseries_disable_reloc_on_exc(void)
401 rc = disable_reloc_on_exceptions();
402 if (!H_IS_LONG_BUSY(rc))
404 mdelay(get_longbusy_msecs(rc));
407 pr_warn("Warning: Failed to disable relocation on exceptions: %ld\n",
410 EXPORT_SYMBOL(pseries_disable_reloc_on_exc);
412 #ifdef CONFIG_KEXEC_CORE
413 static void pSeries_machine_kexec(struct kimage *image)
415 if (firmware_has_feature(FW_FEATURE_SET_MODE))
416 pseries_disable_reloc_on_exc();
418 default_machine_kexec(image);
422 #ifdef __LITTLE_ENDIAN__
423 void pseries_big_endian_exceptions(void)
428 rc = enable_big_endian_exceptions();
429 if (!H_IS_LONG_BUSY(rc))
431 mdelay(get_longbusy_msecs(rc));
435 * At this point it is unlikely panic() will get anything
436 * out to the user, since this is called very late in kexec
437 * but at least this will stop us from continuing on further
438 * and creating an even more difficult to debug situation.
440 * There is a known problem when kdump'ing, if cpus are offline
441 * the above call will fail. Rather than panicking again, keep
442 * going and hope the kdump kernel is also little endian, which
445 if (rc && !kdump_in_progress())
446 panic("Could not enable big endian exceptions");
449 void pseries_little_endian_exceptions(void)
454 rc = enable_little_endian_exceptions();
455 if (!H_IS_LONG_BUSY(rc))
457 mdelay(get_longbusy_msecs(rc));
460 ppc_md.progress("H_SET_MODE LE exception fail", 0);
461 panic("Could not enable little endian exceptions");
466 static void __init find_and_init_phbs(void)
468 struct device_node *node;
469 struct pci_controller *phb;
470 struct device_node *root = of_find_node_by_path("/");
472 for_each_child_of_node(root, node) {
473 if (!of_node_is_type(node, "pci") &&
474 !of_node_is_type(node, "pciex"))
477 phb = pcibios_alloc_controller(node);
481 pci_process_bridge_OF_ranges(phb, node, 0);
482 isa_bridge_find_early(phb);
483 phb->controller_ops = pseries_pci_controller_ops;
489 * PCI_PROBE_ONLY and PCI_REASSIGN_ALL_BUS can be set via properties
492 of_pci_check_probe_only();
495 static void init_cpu_char_feature_flags(struct h_cpu_char_result *result)
498 * The features below are disabled by default, so we instead look to see
499 * if firmware has *enabled* them, and set them if so.
501 if (result->character & H_CPU_CHAR_SPEC_BAR_ORI31)
502 security_ftr_set(SEC_FTR_SPEC_BAR_ORI31);
504 if (result->character & H_CPU_CHAR_BCCTRL_SERIALISED)
505 security_ftr_set(SEC_FTR_BCCTRL_SERIALISED);
507 if (result->character & H_CPU_CHAR_L1D_FLUSH_ORI30)
508 security_ftr_set(SEC_FTR_L1D_FLUSH_ORI30);
510 if (result->character & H_CPU_CHAR_L1D_FLUSH_TRIG2)
511 security_ftr_set(SEC_FTR_L1D_FLUSH_TRIG2);
513 if (result->character & H_CPU_CHAR_L1D_THREAD_PRIV)
514 security_ftr_set(SEC_FTR_L1D_THREAD_PRIV);
516 if (result->character & H_CPU_CHAR_COUNT_CACHE_DISABLED)
517 security_ftr_set(SEC_FTR_COUNT_CACHE_DISABLED);
519 if (result->character & H_CPU_CHAR_BCCTR_FLUSH_ASSIST)
520 security_ftr_set(SEC_FTR_BCCTR_FLUSH_ASSIST);
522 if (result->character & H_CPU_CHAR_BCCTR_LINK_FLUSH_ASSIST)
523 security_ftr_set(SEC_FTR_BCCTR_LINK_FLUSH_ASSIST);
525 if (result->behaviour & H_CPU_BEHAV_FLUSH_COUNT_CACHE)
526 security_ftr_set(SEC_FTR_FLUSH_COUNT_CACHE);
528 if (result->behaviour & H_CPU_BEHAV_FLUSH_LINK_STACK)
529 security_ftr_set(SEC_FTR_FLUSH_LINK_STACK);
532 * The features below are enabled by default, so we instead look to see
533 * if firmware has *disabled* them, and clear them if so.
535 if (!(result->behaviour & H_CPU_BEHAV_FAVOUR_SECURITY))
536 security_ftr_clear(SEC_FTR_FAVOUR_SECURITY);
538 if (!(result->behaviour & H_CPU_BEHAV_L1D_FLUSH_PR))
539 security_ftr_clear(SEC_FTR_L1D_FLUSH_PR);
541 if (result->behaviour & H_CPU_BEHAV_NO_L1D_FLUSH_ENTRY)
542 security_ftr_clear(SEC_FTR_L1D_FLUSH_ENTRY);
544 if (result->behaviour & H_CPU_BEHAV_NO_L1D_FLUSH_UACCESS)
545 security_ftr_clear(SEC_FTR_L1D_FLUSH_UACCESS);
547 if (!(result->behaviour & H_CPU_BEHAV_BNDS_CHK_SPEC_BAR))
548 security_ftr_clear(SEC_FTR_BNDS_CHK_SPEC_BAR);
551 void pseries_setup_security_mitigations(void)
553 struct h_cpu_char_result result;
554 enum l1d_flush_type types;
559 * Set features to the defaults assumed by init_cpu_char_feature_flags()
560 * so it can set/clear again any features that might have changed after
561 * migration, and in case the hypercall fails and it is not even called.
563 powerpc_security_features = SEC_FTR_DEFAULT;
565 rc = plpar_get_cpu_characteristics(&result);
567 init_cpu_char_feature_flags(&result);
570 * We're the guest so this doesn't apply to us, clear it to simplify
571 * handling of it elsewhere.
573 security_ftr_clear(SEC_FTR_L1D_FLUSH_HV);
575 types = L1D_FLUSH_FALLBACK;
577 if (security_ftr_enabled(SEC_FTR_L1D_FLUSH_TRIG2))
578 types |= L1D_FLUSH_MTTRIG;
580 if (security_ftr_enabled(SEC_FTR_L1D_FLUSH_ORI30))
581 types |= L1D_FLUSH_ORI;
583 enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && \
584 security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR);
586 setup_rfi_flush(types, enable);
587 setup_count_cache_flush();
589 enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
590 security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY);
591 setup_entry_flush(enable);
593 enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
594 security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS);
595 setup_uaccess_flush(enable);
600 #ifdef CONFIG_PCI_IOV
601 enum rtas_iov_fw_value_map {
602 NUM_RES_PROPERTY = 0, /* Number of Resources */
603 LOW_INT = 1, /* Lowest 32 bits of Address */
604 START_OF_ENTRIES = 2, /* Always start of entry */
605 APERTURE_PROPERTY = 2, /* Start of entry+ to Aperture Size */
606 WDW_SIZE_PROPERTY = 4, /* Start of entry+ to Window Size */
607 NEXT_ENTRY = 7 /* Go to next entry on array */
610 enum get_iov_fw_value_index {
611 BAR_ADDRS = 1, /* Get Bar Address */
612 APERTURE_SIZE = 2, /* Get Aperture Size */
613 WDW_SIZE = 3 /* Get Window Size */
616 resource_size_t pseries_get_iov_fw_value(struct pci_dev *dev, int resno,
617 enum get_iov_fw_value_index value)
620 struct device_node *dn = pci_device_to_OF_node(dev);
621 int i, num_res, ret = 0;
623 indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL);
628 * First element in the array is the number of Bars
629 * returned. Search through the list to find the matching
632 num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1);
633 if (resno >= num_res)
634 return 0; /* or an errror */
636 i = START_OF_ENTRIES + NEXT_ENTRY * resno;
639 ret = of_read_number(&indexes[i], 2);
642 ret = of_read_number(&indexes[i + APERTURE_PROPERTY], 2);
645 ret = of_read_number(&indexes[i + WDW_SIZE_PROPERTY], 2);
652 void of_pci_set_vf_bar_size(struct pci_dev *dev, const int *indexes)
654 struct resource *res;
655 resource_size_t base, size;
658 num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1);
659 num_res = min_t(int, num_res, PCI_SRIOV_NUM_BARS);
660 for (i = START_OF_ENTRIES, r = 0; r < num_res && r < PCI_SRIOV_NUM_BARS;
661 i += NEXT_ENTRY, r++) {
662 res = &dev->resource[r + PCI_IOV_RESOURCES];
663 base = of_read_number(&indexes[i], 2);
664 size = of_read_number(&indexes[i + APERTURE_PROPERTY], 2);
665 res->flags = pci_parse_of_flags(of_read_number
666 (&indexes[i + LOW_INT], 1), 0);
667 res->flags |= (IORESOURCE_MEM_64 | IORESOURCE_PCI_FIXED);
668 res->name = pci_name(dev);
670 res->end = base + size - 1;
674 void of_pci_parse_iov_addrs(struct pci_dev *dev, const int *indexes)
676 struct resource *res, *root, *conflict;
677 resource_size_t base, size;
681 * First element in the array is the number of Bars
682 * returned. Search through the list to find the matching
683 * bars assign them from firmware into resources structure.
685 num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1);
686 for (i = START_OF_ENTRIES, r = 0; r < num_res && r < PCI_SRIOV_NUM_BARS;
687 i += NEXT_ENTRY, r++) {
688 res = &dev->resource[r + PCI_IOV_RESOURCES];
689 base = of_read_number(&indexes[i], 2);
690 size = of_read_number(&indexes[i + WDW_SIZE_PROPERTY], 2);
691 res->name = pci_name(dev);
693 res->end = base + size - 1;
694 root = &iomem_resource;
696 "pSeries IOV BAR %d: trying firmware assignment %pR\n",
697 r + PCI_IOV_RESOURCES, res);
698 conflict = request_resource_conflict(root, res);
701 "BAR %d: %pR conflicts with %s %pR\n",
702 r + PCI_IOV_RESOURCES, res,
703 conflict->name, conflict);
704 res->flags |= IORESOURCE_UNSET;
709 static void pseries_disable_sriov_resources(struct pci_dev *pdev)
713 pci_warn(pdev, "No hypervisor support for SR-IOV on this device, IOV BARs disabled.\n");
714 for (i = 0; i < PCI_SRIOV_NUM_BARS; i++)
715 pdev->resource[i + PCI_IOV_RESOURCES].flags = 0;
718 static void pseries_pci_fixup_resources(struct pci_dev *pdev)
721 struct device_node *dn = pci_device_to_OF_node(pdev);
723 /*Firmware must support open sriov otherwise dont configure*/
724 indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL);
726 of_pci_set_vf_bar_size(pdev, indexes);
728 pseries_disable_sriov_resources(pdev);
731 static void pseries_pci_fixup_iov_resources(struct pci_dev *pdev)
734 struct device_node *dn = pci_device_to_OF_node(pdev);
736 if (!pdev->is_physfn || pci_dev_is_added(pdev))
738 /*Firmware must support open sriov otherwise dont configure*/
739 indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL);
741 of_pci_parse_iov_addrs(pdev, indexes);
743 pseries_disable_sriov_resources(pdev);
746 static resource_size_t pseries_pci_iov_resource_alignment(struct pci_dev *pdev,
750 struct device_node *dn = pci_device_to_OF_node(pdev);
752 /*Firmware must support open sriov otherwise report regular alignment*/
753 reg = of_get_property(dn, "ibm,is-open-sriov-pf", NULL);
755 return pci_iov_resource_size(pdev, resno);
757 if (!pdev->is_physfn)
759 return pseries_get_iov_fw_value(pdev,
760 resno - PCI_IOV_RESOURCES,
765 static void __init pSeries_setup_arch(void)
767 set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT);
769 /* Discover PIC type and setup ppc_md accordingly */
773 if (radix_enabled() && !mmu_has_feature(MMU_FTR_GTSE))
774 if (!firmware_has_feature(FW_FEATURE_RPT_INVALIDATE))
775 panic("BUG: Radix support requires either GTSE or RPT_INVALIDATE\n");
778 /* openpic global configuration register (64-bit format). */
779 /* openpic Interrupt Source Unit pointer (64-bit format). */
780 /* python0 facility area (mmio) (64-bit format) REAL address. */
782 /* init to some ~sane value until calibrate_delay() runs */
783 loops_per_jiffy = 50000000;
787 pseries_setup_security_mitigations();
788 pseries_lpar_read_hblkrm_characteristics();
790 /* By default, only probe PCI (can be overridden by rtas_pci) */
791 pci_add_flags(PCI_PROBE_ONLY);
793 /* Find and initialize PCI host bridges */
794 init_pci_config_tokens();
795 find_and_init_phbs();
796 of_reconfig_notifier_register(&pci_dn_reconfig_nb);
798 pSeries_nvram_init();
800 if (firmware_has_feature(FW_FEATURE_LPAR)) {
801 vpa_init(boot_cpuid);
803 if (lppaca_shared_proc()) {
804 static_branch_enable(&shared_processor);
808 ppc_md.power_save = pseries_lpar_idle;
809 ppc_md.enable_pmcs = pseries_lpar_enable_pmcs;
810 #ifdef CONFIG_PCI_IOV
811 ppc_md.pcibios_fixup_resources =
812 pseries_pci_fixup_resources;
813 ppc_md.pcibios_fixup_sriov =
814 pseries_pci_fixup_iov_resources;
815 ppc_md.pcibios_iov_resource_alignment =
816 pseries_pci_iov_resource_alignment;
819 /* No special idle routine */
820 ppc_md.enable_pmcs = power4_enable_pmcs;
823 ppc_md.pcibios_root_bridge_prepare = pseries_root_bridge_prepare;
825 if (swiotlb_force == SWIOTLB_FORCE)
826 ppc_swiotlb_enable = 1;
831 static void pseries_panic(char *str)
833 panic_flush_kmsg_end();
837 static int __init pSeries_init_panel(void)
839 /* Manually leave the kernel version on the panel. */
840 #ifdef __BIG_ENDIAN__
841 ppc_md.progress("Linux ppc64\n", 0);
843 ppc_md.progress("Linux ppc64le\n", 0);
845 ppc_md.progress(init_utsname()->version, 0);
849 machine_arch_initcall(pseries, pSeries_init_panel);
851 static int pseries_set_dabr(unsigned long dabr, unsigned long dabrx)
853 return plpar_hcall_norets(H_SET_DABR, dabr);
856 static int pseries_set_xdabr(unsigned long dabr, unsigned long dabrx)
858 /* Have to set at least one bit in the DABRX according to PAPR */
859 if (dabrx == 0 && dabr == 0)
861 /* PAPR says we can only set kernel and user bits */
862 dabrx &= DABRX_KERNEL | DABRX_USER;
864 return plpar_hcall_norets(H_SET_XDABR, dabr, dabrx);
867 static int pseries_set_dawr(int nr, unsigned long dawr, unsigned long dawrx)
869 /* PAPR says we can't set HYP */
873 return plpar_set_watchpoint0(dawr, dawrx);
875 return plpar_set_watchpoint1(dawr, dawrx);
878 #define CMO_CHARACTERISTICS_TOKEN 44
879 #define CMO_MAXLENGTH 1026
881 void pSeries_coalesce_init(void)
883 struct hvcall_mpp_x_data mpp_x_data;
885 if (firmware_has_feature(FW_FEATURE_CMO) && !h_get_mpp_x(&mpp_x_data))
886 powerpc_firmware_features |= FW_FEATURE_XCMO;
888 powerpc_firmware_features &= ~FW_FEATURE_XCMO;
892 * fw_cmo_feature_init - FW_FEATURE_CMO is not stored in ibm,hypertas-functions,
893 * handle that here. (Stolen from parse_system_parameter_string)
895 static void pSeries_cmo_feature_init(void)
897 char *ptr, *key, *value, *end;
899 int page_order = IOMMU_PAGE_SHIFT_4K;
901 pr_debug(" -> fw_cmo_feature_init()\n");
902 spin_lock(&rtas_data_buf_lock);
903 memset(rtas_data_buf, 0, RTAS_DATA_BUF_SIZE);
904 call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
906 CMO_CHARACTERISTICS_TOKEN,
910 if (call_status != 0) {
911 spin_unlock(&rtas_data_buf_lock);
912 pr_debug("CMO not available\n");
913 pr_debug(" <- fw_cmo_feature_init()\n");
917 end = rtas_data_buf + CMO_MAXLENGTH - 2;
918 ptr = rtas_data_buf + 2; /* step over strlen value */
921 while (*ptr && (ptr <= end)) {
922 /* Separate the key and value by replacing '=' with '\0' and
923 * point the value at the string after the '='
928 } else if (ptr[0] == '\0' || ptr[0] == ',') {
929 /* Terminate the string containing the key/value pair */
933 pr_debug("Malformed key/value pair\n");
934 /* Never found a '=', end processing */
938 if (0 == strcmp(key, "CMOPageSize"))
939 page_order = simple_strtol(value, NULL, 10);
940 else if (0 == strcmp(key, "PrPSP"))
941 CMO_PrPSP = simple_strtol(value, NULL, 10);
942 else if (0 == strcmp(key, "SecPSP"))
943 CMO_SecPSP = simple_strtol(value, NULL, 10);
944 value = key = ptr + 1;
949 /* Page size is returned as the power of 2 of the page size,
950 * convert to the page size in bytes before returning
952 CMO_PageSize = 1 << page_order;
953 pr_debug("CMO_PageSize = %lu\n", CMO_PageSize);
955 if (CMO_PrPSP != -1 || CMO_SecPSP != -1) {
956 pr_info("CMO enabled\n");
957 pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
959 powerpc_firmware_features |= FW_FEATURE_CMO;
960 pSeries_coalesce_init();
962 pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
964 spin_unlock(&rtas_data_buf_lock);
965 pr_debug(" <- fw_cmo_feature_init()\n");
969 * Early initialization. Relocation is on but do not reference unbolted pages
971 static void __init pseries_init(void)
973 pr_debug(" -> pseries_init()\n");
975 #ifdef CONFIG_HVC_CONSOLE
976 if (firmware_has_feature(FW_FEATURE_LPAR))
977 hvc_vio_init_early();
979 if (firmware_has_feature(FW_FEATURE_XDABR))
980 ppc_md.set_dabr = pseries_set_xdabr;
981 else if (firmware_has_feature(FW_FEATURE_DABR))
982 ppc_md.set_dabr = pseries_set_dabr;
984 if (firmware_has_feature(FW_FEATURE_SET_MODE))
985 ppc_md.set_dawr = pseries_set_dawr;
987 pSeries_cmo_feature_init();
988 iommu_init_early_pSeries();
990 pr_debug(" <- pseries_init()\n");
994 * pseries_power_off - tell firmware about how to power off the system.
996 * This function calls either the power-off rtas token in normal cases
997 * or the ibm,power-off-ups token (if present & requested) in case of
998 * a power failure. If power-off token is used, power on will only be
999 * possible with power button press. If ibm,power-off-ups token is used
1000 * it will allow auto poweron after power is restored.
1002 static void pseries_power_off(void)
1005 int rtas_poweroff_ups_token = rtas_token("ibm,power-off-ups");
1007 if (rtas_flash_term_hook)
1008 rtas_flash_term_hook(SYS_POWER_OFF);
1010 if (rtas_poweron_auto == 0 ||
1011 rtas_poweroff_ups_token == RTAS_UNKNOWN_SERVICE) {
1012 rc = rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1);
1013 printk(KERN_INFO "RTAS power-off returned %d\n", rc);
1015 rc = rtas_call(rtas_poweroff_ups_token, 0, 1, NULL);
1016 printk(KERN_INFO "RTAS ibm,power-off-ups returned %d\n", rc);
1021 static int __init pSeries_probe(void)
1023 if (!of_node_is_type(of_root, "chrp"))
1026 /* Cell blades firmware claims to be chrp while it's not. Until this
1027 * is fixed, we need to avoid those here.
1029 if (of_machine_is_compatible("IBM,CPBW-1.0") ||
1030 of_machine_is_compatible("IBM,CBEA"))
1033 pm_power_off = pseries_power_off;
1035 pr_debug("Machine is%s LPAR !\n",
1036 (powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not");
1043 static int pSeries_pci_probe_mode(struct pci_bus *bus)
1045 if (firmware_has_feature(FW_FEATURE_LPAR))
1046 return PCI_PROBE_DEVTREE;
1047 return PCI_PROBE_NORMAL;
1050 struct pci_controller_ops pseries_pci_controller_ops = {
1051 .probe_mode = pSeries_pci_probe_mode,
1054 define_machine(pseries) {
1056 .probe = pSeries_probe,
1057 .setup_arch = pSeries_setup_arch,
1058 .init_IRQ = pseries_init_irq,
1059 .show_cpuinfo = pSeries_show_cpuinfo,
1060 .log_error = pSeries_log_error,
1061 .pcibios_fixup = pSeries_final_fixup,
1062 .restart = rtas_restart,
1064 .panic = pseries_panic,
1065 .get_boot_time = rtas_get_boot_time,
1066 .get_rtc_time = rtas_get_rtc_time,
1067 .set_rtc_time = rtas_set_rtc_time,
1068 .calibrate_decr = generic_calibrate_decr,
1069 .progress = rtas_progress,
1070 .system_reset_exception = pSeries_system_reset_exception,
1071 .machine_check_early = pseries_machine_check_realmode,
1072 .machine_check_exception = pSeries_machine_check_exception,
1073 #ifdef CONFIG_KEXEC_CORE
1074 .machine_kexec = pSeries_machine_kexec,
1075 .kexec_cpu_down = pseries_kexec_cpu_down,
1077 #ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
1078 .memory_block_size = pseries_memory_block_size,