1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * PowerNV OPAL high level interfaces
5 * Copyright 2011 IBM Corp.
8 #define pr_fmt(fmt) "opal: " fmt
10 #include <linux/printk.h>
11 #include <linux/types.h>
13 #include <linux/of_fdt.h>
14 #include <linux/of_platform.h>
15 #include <linux/of_address.h>
16 #include <linux/interrupt.h>
17 #include <linux/notifier.h>
18 #include <linux/slab.h>
19 #include <linux/sched.h>
20 #include <linux/kobject.h>
21 #include <linux/delay.h>
22 #include <linux/memblock.h>
23 #include <linux/kthread.h>
24 #include <linux/freezer.h>
25 #include <linux/kmsg_dump.h>
26 #include <linux/console.h>
27 #include <linux/sched/debug.h>
29 #include <asm/machdep.h>
31 #include <asm/firmware.h>
33 #include <asm/imc-pmu.h>
38 #define OPAL_MSG_QUEUE_MAX 16
40 struct opal_msg_node {
41 struct list_head list;
45 static DEFINE_SPINLOCK(msg_list_lock);
46 static LIST_HEAD(msg_list);
48 /* /sys/firmware/opal */
49 struct kobject *opal_kobj;
57 struct mcheck_recoverable_range {
63 static int msg_list_size;
65 static struct mcheck_recoverable_range *mc_recoverable_range;
66 static int mc_recoverable_range_len;
68 struct device_node *opal_node;
69 static DEFINE_SPINLOCK(opal_write_lock);
70 static struct atomic_notifier_head opal_msg_notifier_head[OPAL_MSG_TYPE_MAX];
71 static uint32_t opal_heartbeat;
72 static struct task_struct *kopald_tsk;
73 static struct opal_msg *opal_msg;
74 static u32 opal_msg_size __ro_after_init;
76 void opal_configure_cores(void)
80 /* Do the actual re-init, This will clobber all FPRs, VRs, etc...
82 * It will preserve non volatile GPRs and HSPRG0/1. It will
83 * also restore HIDs and other SPRs to their original value
84 * but it might clobber a bunch.
87 reinit_flags |= OPAL_REINIT_CPUS_HILE_BE;
89 reinit_flags |= OPAL_REINIT_CPUS_HILE_LE;
93 * POWER9 always support running hash:
94 * ie. Host hash supports hash guests
95 * Host radix supports hash/radix guests
97 if (early_cpu_has_feature(CPU_FTR_ARCH_300)) {
98 reinit_flags |= OPAL_REINIT_CPUS_MMU_HASH;
99 if (early_radix_enabled())
100 reinit_flags |= OPAL_REINIT_CPUS_MMU_RADIX;
103 opal_reinit_cpus(reinit_flags);
105 /* Restore some bits */
106 if (cur_cpu_spec->cpu_restore)
107 cur_cpu_spec->cpu_restore();
110 int __init early_init_dt_scan_opal(unsigned long node,
111 const char *uname, int depth, void *data)
113 const void *basep, *entryp, *sizep;
114 int basesz, entrysz, runtimesz;
116 if (depth != 1 || strcmp(uname, "ibm,opal") != 0)
119 basep = of_get_flat_dt_prop(node, "opal-base-address", &basesz);
120 entryp = of_get_flat_dt_prop(node, "opal-entry-address", &entrysz);
121 sizep = of_get_flat_dt_prop(node, "opal-runtime-size", &runtimesz);
123 if (!basep || !entryp || !sizep)
126 opal.base = of_read_number(basep, basesz/4);
127 opal.entry = of_read_number(entryp, entrysz/4);
128 opal.size = of_read_number(sizep, runtimesz/4);
130 pr_debug("OPAL Base = 0x%llx (basep=%p basesz=%d)\n",
131 opal.base, basep, basesz);
132 pr_debug("OPAL Entry = 0x%llx (entryp=%p basesz=%d)\n",
133 opal.entry, entryp, entrysz);
134 pr_debug("OPAL Entry = 0x%llx (sizep=%p runtimesz=%d)\n",
135 opal.size, sizep, runtimesz);
137 if (of_flat_dt_is_compatible(node, "ibm,opal-v3")) {
138 powerpc_firmware_features |= FW_FEATURE_OPAL;
139 pr_debug("OPAL detected !\n");
141 panic("OPAL != V3 detected, no longer supported.\n");
147 int __init early_init_dt_scan_recoverable_ranges(unsigned long node,
148 const char *uname, int depth, void *data)
153 if (depth != 1 || strcmp(uname, "ibm,opal") != 0)
156 prop = of_get_flat_dt_prop(node, "mcheck-recoverable-ranges", &psize);
161 pr_debug("Found machine check recoverable ranges.\n");
164 * Calculate number of available entries.
166 * Each recoverable address range entry is (start address, len,
167 * recovery address), 2 cells each for start and recovery address,
168 * 1 cell for len, totalling 5 cells per entry.
170 mc_recoverable_range_len = psize / (sizeof(*prop) * 5);
173 if (!mc_recoverable_range_len)
176 /* Size required to hold all the entries. */
177 size = mc_recoverable_range_len *
178 sizeof(struct mcheck_recoverable_range);
181 * Allocate a buffer to hold the MC recoverable ranges.
183 mc_recoverable_range = memblock_alloc(size, __alignof__(u64));
184 if (!mc_recoverable_range)
185 panic("%s: Failed to allocate %u bytes align=0x%lx\n",
186 __func__, size, __alignof__(u64));
188 for (i = 0; i < mc_recoverable_range_len; i++) {
189 mc_recoverable_range[i].start_addr =
190 of_read_number(prop + (i * 5) + 0, 2);
191 mc_recoverable_range[i].end_addr =
192 mc_recoverable_range[i].start_addr +
193 of_read_number(prop + (i * 5) + 2, 1);
194 mc_recoverable_range[i].recover_addr =
195 of_read_number(prop + (i * 5) + 3, 2);
197 pr_debug("Machine check recoverable range: %llx..%llx: %llx\n",
198 mc_recoverable_range[i].start_addr,
199 mc_recoverable_range[i].end_addr,
200 mc_recoverable_range[i].recover_addr);
205 static int __init opal_register_exception_handlers(void)
207 #ifdef __BIG_ENDIAN__
210 if (!(powerpc_firmware_features & FW_FEATURE_OPAL))
213 /* Hookup some exception handlers except machine check. We use the
214 * fwnmi area at 0x7000 to provide the glue space to OPAL
219 * Only ancient OPAL firmware requires this.
220 * Specifically, firmware from FW810.00 (released June 2014)
221 * through FW810.20 (Released October 2014).
223 * Check if we are running on newer (post Oct 2014) firmware that
224 * exports the OPAL_HANDLE_HMI token. If yes, then don't ask OPAL to
225 * patch the HMI interrupt and we catch it directly in Linux.
227 * For older firmware (i.e < FW810.20), we fallback to old behavior and
228 * let OPAL patch the HMI vector and handle it inside OPAL firmware.
230 * For newer firmware we catch/handle the HMI directly in Linux.
232 if (!opal_check_token(OPAL_HANDLE_HMI)) {
233 pr_info("Old firmware detected, OPAL handles HMIs.\n");
234 opal_register_exception_handler(
235 OPAL_HYPERVISOR_MAINTENANCE_HANDLER,
241 * Only applicable to ancient firmware, all modern
242 * (post March 2015/skiboot 5.0) firmware will just return
245 opal_register_exception_handler(OPAL_SOFTPATCH_HANDLER, 0, glue);
250 machine_early_initcall(powernv, opal_register_exception_handlers);
252 static void queue_replay_msg(void *msg)
254 struct opal_msg_node *msg_node;
256 if (msg_list_size < OPAL_MSG_QUEUE_MAX) {
257 msg_node = kzalloc(sizeof(*msg_node), GFP_ATOMIC);
259 INIT_LIST_HEAD(&msg_node->list);
260 memcpy(&msg_node->msg, msg, sizeof(struct opal_msg));
261 list_add_tail(&msg_node->list, &msg_list);
264 pr_warn_once("message queue no memory\n");
266 if (msg_list_size >= OPAL_MSG_QUEUE_MAX)
267 pr_warn_once("message queue full\n");
271 static void dequeue_replay_msg(enum opal_msg_type msg_type)
273 struct opal_msg_node *msg_node, *tmp;
275 list_for_each_entry_safe(msg_node, tmp, &msg_list, list) {
276 if (be32_to_cpu(msg_node->msg.msg_type) != msg_type)
279 atomic_notifier_call_chain(&opal_msg_notifier_head[msg_type],
283 list_del(&msg_node->list);
290 * Opal message notifier based on message type. Allow subscribers to get
291 * notified for specific messgae type.
293 int opal_message_notifier_register(enum opal_msg_type msg_type,
294 struct notifier_block *nb)
299 if (!nb || msg_type >= OPAL_MSG_TYPE_MAX) {
300 pr_warn("%s: Invalid arguments, msg_type:%d\n",
305 spin_lock_irqsave(&msg_list_lock, flags);
306 ret = atomic_notifier_chain_register(
307 &opal_msg_notifier_head[msg_type], nb);
310 * If the registration succeeded, replay any queued messages that came
311 * in prior to the notifier chain registration. msg_list_lock held here
312 * to ensure they're delivered prior to any subsequent messages.
315 dequeue_replay_msg(msg_type);
317 spin_unlock_irqrestore(&msg_list_lock, flags);
321 EXPORT_SYMBOL_GPL(opal_message_notifier_register);
323 int opal_message_notifier_unregister(enum opal_msg_type msg_type,
324 struct notifier_block *nb)
326 return atomic_notifier_chain_unregister(
327 &opal_msg_notifier_head[msg_type], nb);
329 EXPORT_SYMBOL_GPL(opal_message_notifier_unregister);
331 static void opal_message_do_notify(uint32_t msg_type, void *msg)
336 spin_lock_irqsave(&msg_list_lock, flags);
337 if (opal_msg_notifier_head[msg_type].head == NULL) {
339 * Queue up the msg since no notifiers have registered
340 * yet for this msg_type.
342 queue_replay_msg(msg);
345 spin_unlock_irqrestore(&msg_list_lock, flags);
350 /* notify subscribers */
351 atomic_notifier_call_chain(&opal_msg_notifier_head[msg_type],
355 static void opal_handle_message(void)
360 ret = opal_get_msg(__pa(opal_msg), opal_msg_size);
361 /* No opal message pending. */
362 if (ret == OPAL_RESOURCE)
365 /* check for errors. */
367 pr_warn("%s: Failed to retrieve opal message, err=%lld\n",
372 type = be32_to_cpu(opal_msg->msg_type);
375 if (type >= OPAL_MSG_TYPE_MAX) {
376 pr_warn_once("%s: Unknown message type: %u\n", __func__, type);
379 opal_message_do_notify(type, (void *)opal_msg);
382 static irqreturn_t opal_message_notify(int irq, void *data)
384 opal_handle_message();
388 static int __init opal_message_init(struct device_node *opal_node)
392 ret = of_property_read_u32(opal_node, "opal-msg-size", &opal_msg_size);
394 pr_notice("Failed to read opal-msg-size property\n");
395 opal_msg_size = sizeof(struct opal_msg);
398 opal_msg = kmalloc(opal_msg_size, GFP_KERNEL);
400 opal_msg_size = sizeof(struct opal_msg);
401 /* Try to allocate fixed message size */
402 opal_msg = kmalloc(opal_msg_size, GFP_KERNEL);
403 BUG_ON(opal_msg == NULL);
406 for (i = 0; i < OPAL_MSG_TYPE_MAX; i++)
407 ATOMIC_INIT_NOTIFIER_HEAD(&opal_msg_notifier_head[i]);
409 irq = opal_event_request(ilog2(OPAL_EVENT_MSG_PENDING));
411 pr_err("%s: Can't register OPAL event irq (%d)\n",
416 ret = request_irq(irq, opal_message_notify,
417 IRQ_TYPE_LEVEL_HIGH, "opal-msg", NULL);
419 pr_err("%s: Can't request OPAL event irq (%d)\n",
427 int opal_get_chars(uint32_t vtermno, char *buf, int count)
434 opal_poll_events(&evt);
435 if ((be64_to_cpu(evt) & OPAL_EVENT_CONSOLE_INPUT) == 0)
437 len = cpu_to_be64(count);
438 rc = opal_console_read(vtermno, &len, buf);
439 if (rc == OPAL_SUCCESS)
440 return be64_to_cpu(len);
444 static int __opal_put_chars(uint32_t vtermno, const char *data, int total_len, bool atomic)
446 unsigned long flags = 0 /* shut up gcc */;
455 spin_lock_irqsave(&opal_write_lock, flags);
456 rc = opal_console_write_buffer_space(vtermno, &olen);
457 if (rc || be64_to_cpu(olen) < total_len) {
458 /* Closed -> drop characters */
466 /* Should not get a partial write here because space is available. */
467 olen = cpu_to_be64(total_len);
468 rc = opal_console_write(vtermno, &olen, data);
469 if (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
470 if (rc == OPAL_BUSY_EVENT)
471 opal_poll_events(NULL);
476 /* Closed or other error drop */
477 if (rc != OPAL_SUCCESS) {
478 written = opal_error_code(rc);
482 written = be64_to_cpu(olen);
483 if (written < total_len) {
485 /* Should not happen */
486 pr_warn("atomic console write returned partial "
487 "len=%d written=%d\n", total_len, written);
495 spin_unlock_irqrestore(&opal_write_lock, flags);
500 int opal_put_chars(uint32_t vtermno, const char *data, int total_len)
502 return __opal_put_chars(vtermno, data, total_len, false);
506 * opal_put_chars_atomic will not perform partial-writes. Data will be
507 * atomically written to the terminal or not at all. This is not strictly
508 * true at the moment because console space can race with OPAL's console
511 int opal_put_chars_atomic(uint32_t vtermno, const char *data, int total_len)
513 return __opal_put_chars(vtermno, data, total_len, true);
516 static s64 __opal_flush_console(uint32_t vtermno)
520 if (!opal_check_token(OPAL_CONSOLE_FLUSH)) {
524 * If OPAL_CONSOLE_FLUSH is not implemented in the firmware,
525 * the console can still be flushed by calling the polling
526 * function while it has OPAL_EVENT_CONSOLE_OUTPUT events.
528 WARN_ONCE(1, "opal: OPAL_CONSOLE_FLUSH missing.\n");
530 opal_poll_events(&evt);
531 if (!(be64_to_cpu(evt) & OPAL_EVENT_CONSOLE_OUTPUT))
536 rc = opal_console_flush(vtermno);
537 if (rc == OPAL_BUSY_EVENT) {
538 opal_poll_events(NULL);
547 * opal_flush_console spins until the console is flushed
549 int opal_flush_console(uint32_t vtermno)
552 s64 rc = __opal_flush_console(vtermno);
554 if (rc == OPAL_BUSY || rc == OPAL_PARTIAL) {
559 return opal_error_code(rc);
564 * opal_flush_chars is an hvc interface that sleeps until the console is
565 * flushed if wait, otherwise it will return -EBUSY if the console has data,
566 * -EAGAIN if it has data and some of it was flushed.
568 int opal_flush_chars(uint32_t vtermno, bool wait)
571 s64 rc = __opal_flush_console(vtermno);
573 if (rc == OPAL_BUSY || rc == OPAL_PARTIAL) {
575 msleep(OPAL_BUSY_DELAY_MS);
578 if (rc == OPAL_PARTIAL)
582 return opal_error_code(rc);
586 static int opal_recover_mce(struct pt_regs *regs,
587 struct machine_check_event *evt)
591 if (!(regs->msr & MSR_RI)) {
592 /* If MSR_RI isn't set, we cannot recover */
593 pr_err("Machine check interrupt unrecoverable: MSR(RI=0)\n");
595 } else if (evt->disposition == MCE_DISPOSITION_RECOVERED) {
596 /* Platform corrected itself */
598 } else if (evt->severity == MCE_SEV_FATAL) {
599 /* Fatal machine check */
600 pr_err("Machine check interrupt is fatal\n");
604 if (!recovered && evt->sync_error) {
606 * Try to kill processes if we get a synchronous machine check
607 * (e.g., one caused by execution of this instruction). This
608 * will devolve into a panic if we try to kill init or are in
611 * TODO: Queue up this address for hwpoisioning later.
612 * TODO: This is not quite right for d-side machine
613 * checks ->nip is not necessarily the important
616 if ((user_mode(regs))) {
617 _exception(SIGBUS, regs, BUS_MCEERR_AR, regs->nip);
619 } else if (die_will_crash()) {
621 * die() would kill the kernel, so better to go via
622 * the platform reboot code that will log the
627 die("Machine check", regs, SIGBUS);
635 void __noreturn pnv_platform_error_reboot(struct pt_regs *regs, const char *msg)
637 panic_flush_kmsg_start();
639 pr_emerg("Hardware platform error: %s\n", msg);
644 panic_flush_kmsg_end();
647 * Don't bother to shut things down because this will
650 if (opal_cec_reboot2(OPAL_REBOOT_PLATFORM_ERROR, msg)
651 == OPAL_UNSUPPORTED) {
652 pr_emerg("Reboot type %d not supported for %s\n",
653 OPAL_REBOOT_PLATFORM_ERROR, msg);
657 * We reached here. There can be three possibilities:
658 * 1. We are running on a firmware level that do not support
660 * 2. We are running on a firmware level that do not support
661 * OPAL_REBOOT_PLATFORM_ERROR reboot type.
662 * 3. We are running on FSP based system that does not need
663 * opal to trigger checkstop explicitly for error analysis.
664 * The FSP PRD component would have already got notified
665 * about this error through other channels.
666 * 4. We are running on a newer skiboot that by default does
667 * not cause a checkstop, drops us back to the kernel to
668 * extract context and state at the time of the error.
674 int opal_machine_check(struct pt_regs *regs)
676 struct machine_check_event evt;
678 if (!get_mce_event(&evt, MCE_EVENT_RELEASE))
681 /* Print things out */
682 if (evt.version != MCE_V1) {
683 pr_err("Machine Check Exception, Unknown event version %d !\n",
687 machine_check_print_event_info(&evt, user_mode(regs), false);
689 if (opal_recover_mce(regs, &evt))
692 pnv_platform_error_reboot(regs, "Unrecoverable Machine Check exception");
695 /* Early hmi handler called in real mode. */
696 int opal_hmi_exception_early(struct pt_regs *regs)
701 * call opal hmi handler. Pass paca address as token.
702 * The return value OPAL_SUCCESS is an indication that there is
703 * an HMI event generated waiting to pull by Linux.
705 rc = opal_handle_hmi();
706 if (rc == OPAL_SUCCESS) {
707 local_paca->hmi_event_available = 1;
713 int opal_hmi_exception_early2(struct pt_regs *regs)
719 * call opal hmi handler.
720 * Check 64-bit flag mask to find out if an event was generated,
721 * and whether TB is still valid or not etc.
723 rc = opal_handle_hmi2(&out_flags);
724 if (rc != OPAL_SUCCESS)
727 if (be64_to_cpu(out_flags) & OPAL_HMI_FLAGS_NEW_EVENT)
728 local_paca->hmi_event_available = 1;
729 if (be64_to_cpu(out_flags) & OPAL_HMI_FLAGS_TOD_TB_FAIL)
734 /* HMI exception handler called in virtual mode when irqs are next enabled. */
735 int opal_handle_hmi_exception(struct pt_regs *regs)
738 * Check if HMI event is available.
739 * if Yes, then wake kopald to process them.
741 if (!local_paca->hmi_event_available)
744 local_paca->hmi_event_available = 0;
750 static uint64_t find_recovery_address(uint64_t nip)
754 for (i = 0; i < mc_recoverable_range_len; i++)
755 if ((nip >= mc_recoverable_range[i].start_addr) &&
756 (nip < mc_recoverable_range[i].end_addr))
757 return mc_recoverable_range[i].recover_addr;
761 bool opal_mce_check_early_recovery(struct pt_regs *regs)
763 uint64_t recover_addr = 0;
765 if (!opal.base || !opal.size)
768 if ((regs->nip >= opal.base) &&
769 (regs->nip < (opal.base + opal.size)))
770 recover_addr = find_recovery_address(regs->nip);
773 * Setup regs->nip to rfi into fixup address.
776 regs->nip = recover_addr;
779 return !!recover_addr;
782 static int opal_sysfs_init(void)
784 opal_kobj = kobject_create_and_add("opal", firmware_kobj);
786 pr_warn("kobject_create_and_add opal failed\n");
793 static ssize_t export_attr_read(struct file *fp, struct kobject *kobj,
794 struct bin_attribute *bin_attr, char *buf,
795 loff_t off, size_t count)
797 return memory_read_from_buffer(buf, count, &off, bin_attr->private,
801 static int opal_add_one_export(struct kobject *parent, const char *export_name,
802 struct device_node *np, const char *prop_name)
804 struct bin_attribute *attr = NULL;
805 const char *name = NULL;
809 rc = of_property_read_u64_array(np, prop_name, &vals[0], 2);
813 attr = kzalloc(sizeof(*attr), GFP_KERNEL);
818 name = kstrdup(export_name, GFP_KERNEL);
824 sysfs_bin_attr_init(attr);
825 attr->attr.name = name;
826 attr->attr.mode = 0400;
827 attr->read = export_attr_read;
828 attr->private = __va(vals[0]);
829 attr->size = vals[1];
831 rc = sysfs_create_bin_file(parent, attr);
841 static void opal_add_exported_attrs(struct device_node *np,
842 struct kobject *kobj)
844 struct device_node *child;
845 struct property *prop;
847 for_each_property_of_node(np, prop) {
850 if (!strcmp(prop->name, "name") ||
851 !strcmp(prop->name, "phandle"))
854 rc = opal_add_one_export(kobj, prop->name, np, prop->name);
856 pr_warn("Unable to add export %pOF/%s, rc = %d!\n",
861 for_each_child_of_node(np, child) {
862 struct kobject *child_kobj;
864 child_kobj = kobject_create_and_add(child->name, kobj);
866 pr_err("Unable to create export dir for %pOF\n", child);
870 opal_add_exported_attrs(child, child_kobj);
875 * opal_export_attrs: creates a sysfs node for each property listed in
876 * the device-tree under /ibm,opal/firmware/exports/
877 * All new sysfs nodes are created under /opal/exports/.
878 * This allows for reserved memory regions (e.g. HDAT) to be read.
879 * The new sysfs nodes are only readable by root.
881 static void opal_export_attrs(void)
883 struct device_node *np;
884 struct kobject *kobj;
887 np = of_find_node_by_path("/ibm,opal/firmware/exports");
891 /* Create new 'exports' directory - /sys/firmware/opal/exports */
892 kobj = kobject_create_and_add("exports", opal_kobj);
894 pr_warn("kobject_create_and_add() of exports failed\n");
899 opal_add_exported_attrs(np, kobj);
902 * NB: symbol_map existed before the generic export interface so it
903 * lives under the top level opal_kobj.
905 rc = opal_add_one_export(opal_kobj, "symbol_map",
906 np->parent, "symbol-map");
908 pr_warn("Error %d creating OPAL symbols file\n", rc);
913 static void __init opal_dump_region_init(void)
919 if (!opal_check_token(OPAL_REGISTER_DUMP_REGION))
922 /* Register kernel log buffer */
923 addr = log_buf_addr_get();
927 size = log_buf_len_get();
931 rc = opal_register_dump_region(OPAL_DUMP_REGION_LOG_BUF,
933 /* Don't warn if this is just an older OPAL that doesn't
934 * know about that call
936 if (rc && rc != OPAL_UNSUPPORTED)
937 pr_warn("DUMP: Failed to register kernel log buffer. "
941 static void opal_pdev_init(const char *compatible)
943 struct device_node *np;
945 for_each_compatible_node(np, NULL, compatible)
946 of_platform_device_create(np, NULL, NULL);
949 static void __init opal_imc_init_dev(void)
951 struct device_node *np;
953 np = of_find_compatible_node(NULL, NULL, IMC_DTB_COMPAT);
955 of_platform_device_create(np, NULL, NULL);
958 static int kopald(void *unused)
960 unsigned long timeout = msecs_to_jiffies(opal_heartbeat) + 1;
966 opal_handle_events();
968 set_current_state(TASK_INTERRUPTIBLE);
969 if (opal_have_pending_events())
970 __set_current_state(TASK_RUNNING);
972 schedule_timeout(timeout);
974 } while (!kthread_should_stop());
979 void opal_wake_poller(void)
982 wake_up_process(kopald_tsk);
985 static void opal_init_heartbeat(void)
987 /* Old firwmware, we assume the HVC heartbeat is sufficient */
988 if (of_property_read_u32(opal_node, "ibm,heartbeat-ms",
989 &opal_heartbeat) != 0)
993 kopald_tsk = kthread_run(kopald, NULL, "kopald");
996 static int __init opal_init(void)
998 struct device_node *np, *consoles, *leds;
1001 opal_node = of_find_node_by_path("/ibm,opal");
1003 pr_warn("Device node not found\n");
1007 /* Register OPAL consoles if any ports */
1008 consoles = of_find_node_by_path("/ibm,opal/consoles");
1010 for_each_child_of_node(consoles, np) {
1011 if (!of_node_name_eq(np, "serial"))
1013 of_platform_device_create(np, NULL, NULL);
1015 of_node_put(consoles);
1018 /* Initialise OPAL messaging system */
1019 opal_message_init(opal_node);
1021 /* Initialise OPAL asynchronous completion interface */
1022 opal_async_comp_init();
1024 /* Initialise OPAL sensor interface */
1027 /* Initialise OPAL hypervisor maintainence interrupt handling */
1028 opal_hmi_handler_init();
1030 /* Create i2c platform devices */
1031 opal_pdev_init("ibm,opal-i2c");
1033 /* Handle non-volatile memory devices */
1034 opal_pdev_init("pmem-region");
1036 /* Setup a heatbeat thread if requested by OPAL */
1037 opal_init_heartbeat();
1039 /* Detect In-Memory Collection counters and create devices*/
1040 opal_imc_init_dev();
1042 /* Create leds platform devices */
1043 leds = of_find_node_by_path("/ibm,opal/leds");
1045 of_platform_device_create(leds, "opal_leds", NULL);
1049 /* Initialise OPAL message log interface */
1052 /* Create "opal" kobject under /sys/firmware */
1053 rc = opal_sysfs_init();
1055 /* Setup dump region interface */
1056 opal_dump_region_init();
1057 /* Setup error log interface */
1058 rc = opal_elog_init();
1059 /* Setup code update interface */
1060 opal_flash_update_init();
1061 /* Setup platform dump extract interface */
1062 opal_platform_dump_init();
1063 /* Setup system parameters interface */
1064 opal_sys_param_init();
1065 /* Setup message log sysfs interface. */
1066 opal_msglog_sysfs_init();
1067 /* Add all export properties*/
1068 opal_export_attrs();
1071 /* Initialize platform devices: IPMI backend, PRD & flash interface */
1072 opal_pdev_init("ibm,opal-ipmi");
1073 opal_pdev_init("ibm,opal-flash");
1074 opal_pdev_init("ibm,opal-prd");
1076 /* Initialise platform device: oppanel interface */
1077 opal_pdev_init("ibm,opal-oppanel");
1079 /* Initialise OPAL kmsg dumper for flushing console on panic */
1082 /* Initialise OPAL powercap interface */
1083 opal_powercap_init();
1085 /* Initialise OPAL Power-Shifting-Ratio interface */
1088 /* Initialise OPAL sensor groups */
1089 opal_sensor_groups_init();
1091 /* Initialise OPAL Power control interface */
1092 opal_power_control_init();
1094 /* Initialize OPAL secure variables */
1095 opal_pdev_init("ibm,secvar-backend");
1099 machine_subsys_initcall(powernv, opal_init);
1101 void opal_shutdown(void)
1103 long rc = OPAL_BUSY;
1105 opal_event_shutdown();
1108 * Then sync with OPAL which ensure anything that can
1109 * potentially write to our memory has completed such
1110 * as an ongoing dump retrieval
1112 while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
1113 rc = opal_sync_host_reboot();
1114 if (rc == OPAL_BUSY)
1115 opal_poll_events(NULL);
1120 /* Unregister memory dump region */
1121 if (opal_check_token(OPAL_UNREGISTER_DUMP_REGION))
1122 opal_unregister_dump_region(OPAL_DUMP_REGION_LOG_BUF);
1125 /* Export this so that test modules can use it */
1126 EXPORT_SYMBOL_GPL(opal_invalid_call);
1127 EXPORT_SYMBOL_GPL(opal_xscom_read);
1128 EXPORT_SYMBOL_GPL(opal_xscom_write);
1129 EXPORT_SYMBOL_GPL(opal_ipmi_send);
1130 EXPORT_SYMBOL_GPL(opal_ipmi_recv);
1131 EXPORT_SYMBOL_GPL(opal_flash_read);
1132 EXPORT_SYMBOL_GPL(opal_flash_write);
1133 EXPORT_SYMBOL_GPL(opal_flash_erase);
1134 EXPORT_SYMBOL_GPL(opal_prd_msg);
1135 EXPORT_SYMBOL_GPL(opal_check_token);
1137 /* Convert a region of vmalloc memory to an opal sg list */
1138 struct opal_sg_list *opal_vmalloc_to_sg_list(void *vmalloc_addr,
1139 unsigned long vmalloc_size)
1141 struct opal_sg_list *sg, *first = NULL;
1142 unsigned long i = 0;
1144 sg = kzalloc(PAGE_SIZE, GFP_KERNEL);
1150 while (vmalloc_size > 0) {
1151 uint64_t data = vmalloc_to_pfn(vmalloc_addr) << PAGE_SHIFT;
1152 uint64_t length = min(vmalloc_size, PAGE_SIZE);
1154 sg->entry[i].data = cpu_to_be64(data);
1155 sg->entry[i].length = cpu_to_be64(length);
1158 if (i >= SG_ENTRIES_PER_NODE) {
1159 struct opal_sg_list *next;
1161 next = kzalloc(PAGE_SIZE, GFP_KERNEL);
1165 sg->length = cpu_to_be64(
1166 i * sizeof(struct opal_sg_entry) + 16);
1168 sg->next = cpu_to_be64(__pa(next));
1172 vmalloc_addr += length;
1173 vmalloc_size -= length;
1176 sg->length = cpu_to_be64(i * sizeof(struct opal_sg_entry) + 16);
1181 pr_err("%s : Failed to allocate memory\n", __func__);
1182 opal_free_sg_list(first);
1186 void opal_free_sg_list(struct opal_sg_list *sg)
1189 uint64_t next = be64_to_cpu(sg->next);
1200 int opal_error_code(int rc)
1203 case OPAL_SUCCESS: return 0;
1205 case OPAL_PARAMETER: return -EINVAL;
1206 case OPAL_ASYNC_COMPLETION: return -EINPROGRESS;
1208 case OPAL_BUSY_EVENT: return -EBUSY;
1209 case OPAL_NO_MEM: return -ENOMEM;
1210 case OPAL_PERMISSION: return -EPERM;
1212 case OPAL_UNSUPPORTED: return -EIO;
1213 case OPAL_HARDWARE: return -EIO;
1214 case OPAL_INTERNAL_ERROR: return -EIO;
1215 case OPAL_TIMEOUT: return -ETIMEDOUT;
1217 pr_err("%s: unexpected OPAL error %d\n", __func__, rc);
1222 void powernv_set_nmmu_ptcr(unsigned long ptcr)
1226 if (firmware_has_feature(FW_FEATURE_OPAL)) {
1227 rc = opal_nmmu_set_ptcr(-1UL, ptcr);
1228 if (rc != OPAL_SUCCESS && rc != OPAL_UNSUPPORTED)
1229 pr_warn("%s: Unable to set nest mmu ptcr\n", __func__);
1233 EXPORT_SYMBOL_GPL(opal_poll_events);
1234 EXPORT_SYMBOL_GPL(opal_rtc_read);
1235 EXPORT_SYMBOL_GPL(opal_rtc_write);
1236 EXPORT_SYMBOL_GPL(opal_tpo_read);
1237 EXPORT_SYMBOL_GPL(opal_tpo_write);
1238 EXPORT_SYMBOL_GPL(opal_i2c_request);
1239 /* Export these symbols for PowerNV LED class driver */
1240 EXPORT_SYMBOL_GPL(opal_leds_get_ind);
1241 EXPORT_SYMBOL_GPL(opal_leds_set_ind);
1242 /* Export this symbol for PowerNV Operator Panel class driver */
1243 EXPORT_SYMBOL_GPL(opal_write_oppanel_async);
1244 /* Export this for KVM */
1245 EXPORT_SYMBOL_GPL(opal_int_set_mfrr);
1246 EXPORT_SYMBOL_GPL(opal_int_eoi);
1247 EXPORT_SYMBOL_GPL(opal_error_code);
1248 /* Export the below symbol for NX compression */
1249 EXPORT_SYMBOL(opal_nx_coproc_init);