arch/powerpc/platforms/powermac/low_i2c.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * arch/powerpc/platforms/powermac/low_i2c.c
   4  *
   5  *  Copyright (C) 2003-2005 Ben. Herrenschmidt (benh@kernel.crashing.org)
   6  *
   7  * The linux i2c layer isn't completely suitable for our needs for various
   8  * reasons ranging from too late initialisation to semantics not perfectly
   9  * matching some requirements of the apple platform functions etc...
  10  *
  11  * This file thus provides a simple low level unified i2c interface for
  12  * powermac that covers the various types of i2c busses used in Apple machines.
  13  * For now, keywest, PMU and SMU, though we could add Cuda, or other bit
  14  * banging busses found on older chipsets in earlier machines if we ever need
  15  * one of them.
  16  *
  17  * The drivers in this file are synchronous/blocking. In addition, the
  18  * keywest one is fairly slow due to the use of msleep instead of interrupts
  19  * as the interrupt is currently used by i2c-keywest. In the long run, we
  20  * might want to get rid of those high-level interfaces to linux i2c layer
  21  * either completely (converting all drivers) or replacing them all with a
  22  * single stub driver on top of this one. Once done, the interrupt will be
  23  * available for our use.
  24  */
  25
  26 #undef DEBUG
  27 #undef DEBUG_LOW
  28
  29 #include <linux/types.h>
  30 #include <linux/sched.h>
  31 #include <linux/init.h>
  32 #include <linux/export.h>
  33 #include <linux/adb.h>
  34 #include <linux/pmu.h>
  35 #include <linux/delay.h>
  36 #include <linux/completion.h>
  37 #include <linux/platform_device.h>
  38 #include <linux/interrupt.h>
  39 #include <linux/timer.h>
  40 #include <linux/mutex.h>
  41 #include <linux/i2c.h>
  42 #include <linux/slab.h>
  43 #include <linux/of_irq.h>
  44 #include <asm/keylargo.h>
  45 #include <asm/uninorth.h>
  46 #include <asm/io.h>
  47 #include <asm/machdep.h>
  48 #include <asm/smu.h>
  49 #include <asm/pmac_pfunc.h>
  50 #include <asm/pmac_low_i2c.h>
  51
  52 #ifdef DEBUG
  53 #define DBG(x...) do {\
  54                 printk(KERN_DEBUG "low_i2c:" x);        \
  55         } while(0)
  56 #else
  57 #define DBG(x...)
  58 #endif
  59
  60 #ifdef DEBUG_LOW
  61 #define DBG_LOW(x...) do {\
  62                 printk(KERN_DEBUG "low_i2c:" x);        \
  63         } while(0)
  64 #else
  65 #define DBG_LOW(x...)
  66 #endif
  67
  68
  69 static int pmac_i2c_force_poll = 1;
  70
  71 /*
  72  * A bus structure. Each bus in the system has such a structure associated.
  73  */
  74 struct pmac_i2c_bus
  75 {
  76         struct list_head        link;
  77         struct device_node      *controller;
  78         struct device_node      *busnode;
  79         int                     type;
  80         int                     flags;
  81         struct i2c_adapter      adapter;
  82         void                    *hostdata;
  83         int                     channel;        /* some hosts have multiple */
  84         int                     mode;           /* current mode */
  85         struct mutex            mutex;
  86         int                     opened;
  87         int                     polled;         /* open mode */
  88         struct platform_device  *platform_dev;
  89         struct lock_class_key   lock_key;
  90
  91         /* ops */
  92         int (*open)(struct pmac_i2c_bus *bus);
  93         void (*close)(struct pmac_i2c_bus *bus);
  94         int (*xfer)(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
  95                     u32 subaddr, u8 *data, int len);
  96 };
  97
  98 static LIST_HEAD(pmac_i2c_busses);
  99
 100 /*
 101  * Keywest implementation
 102  */
 103
 104 struct pmac_i2c_host_kw
 105 {
 106         struct mutex            mutex;          /* Access mutex for use by
 107                                                  * i2c-keywest */
 108         void __iomem            *base;          /* register base address */
 109         int                     bsteps;         /* register stepping */
 110         int                     speed;          /* speed */
 111         int                     irq;
 112         u8                      *data;
 113         unsigned                len;
 114         int                     state;
 115         int                     rw;
 116         int                     polled;
 117         int                     result;
 118         struct completion       complete;
 119         spinlock_t              lock;
 120         struct timer_list       timeout_timer;
 121 };
 122
 123 /* Register indices */
 124 typedef enum {
 125         reg_mode = 0,
 126         reg_control,
 127         reg_status,
 128         reg_isr,
 129         reg_ier,
 130         reg_addr,
 131         reg_subaddr,
 132         reg_data
 133 } reg_t;
 134
 135 /* The Tumbler audio equalizer can be really slow sometimes */
 136 #define KW_POLL_TIMEOUT         (2*HZ)
 137
 138 /* Mode register */
 139 #define KW_I2C_MODE_100KHZ      0x00
 140 #define KW_I2C_MODE_50KHZ       0x01
 141 #define KW_I2C_MODE_25KHZ       0x02
 142 #define KW_I2C_MODE_DUMB        0x00
 143 #define KW_I2C_MODE_STANDARD    0x04
 144 #define KW_I2C_MODE_STANDARDSUB 0x08
 145 #define KW_I2C_MODE_COMBINED    0x0C
 146 #define KW_I2C_MODE_MODE_MASK   0x0C
 147 #define KW_I2C_MODE_CHAN_MASK   0xF0
 148
 149 /* Control register */
 150 #define KW_I2C_CTL_AAK          0x01
 151 #define KW_I2C_CTL_XADDR        0x02
 152 #define KW_I2C_CTL_STOP         0x04
 153 #define KW_I2C_CTL_START        0x08
 154
 155 /* Status register */
 156 #define KW_I2C_STAT_BUSY        0x01
 157 #define KW_I2C_STAT_LAST_AAK    0x02
 158 #define KW_I2C_STAT_LAST_RW     0x04
 159 #define KW_I2C_STAT_SDA         0x08
 160 #define KW_I2C_STAT_SCL         0x10
 161
 162 /* IER & ISR registers */
 163 #define KW_I2C_IRQ_DATA         0x01
 164 #define KW_I2C_IRQ_ADDR         0x02
 165 #define KW_I2C_IRQ_STOP         0x04
 166 #define KW_I2C_IRQ_START        0x08
 167 #define KW_I2C_IRQ_MASK         0x0F
 168
 169 /* State machine states */
 170 enum {
 171         state_idle,
 172         state_addr,
 173         state_read,
 174         state_write,
 175         state_stop,
 176         state_dead
 177 };
 178
 179 #define WRONG_STATE(name) do {\
 180                 printk(KERN_DEBUG "KW: wrong state. Got %s, state: %s " \
 181                        "(isr: %02x)\n", \
 182                        name, __kw_state_names[host->state], isr); \
 183         } while(0)
 184
 185 static const char *__kw_state_names[] = {
 186         "state_idle",
 187         "state_addr",
 188         "state_read",
 189         "state_write",
 190         "state_stop",
 191         "state_dead"
 192 };
 193
 194 static inline u8 __kw_read_reg(struct pmac_i2c_host_kw *host, reg_t reg)
 195 {
 196         return readb(host->base + (((unsigned int)reg) << host->bsteps));
 197 }
 198
 199 static inline void __kw_write_reg(struct pmac_i2c_host_kw *host,
 200                                   reg_t reg, u8 val)
 201 {
 202         writeb(val, host->base + (((unsigned)reg) << host->bsteps));
 203         (void)__kw_read_reg(host, reg_subaddr);
 204 }
 205
 206 #define kw_write_reg(reg, val)  __kw_write_reg(host, reg, val)
 207 #define kw_read_reg(reg)        __kw_read_reg(host, reg)
 208
 209 static u8 kw_i2c_wait_interrupt(struct pmac_i2c_host_kw *host)
 210 {
 211         int i, j;
 212         u8 isr;
 213
 214         for (i = 0; i < 1000; i++) {
 215                 isr = kw_read_reg(reg_isr) & KW_I2C_IRQ_MASK;
 216                 if (isr != 0)
 217                         return isr;
 218
 219                 /* This code is used with the timebase frozen, we cannot rely
 220                  * on udelay nor schedule when in polled mode !
 221                  * For now, just use a bogus loop....
 222                  */
 223                 if (host->polled) {
 224                         for (j = 1; j < 100000; j++)
 225                                 mb();
 226                 } else
 227                         msleep(1);
 228         }
 229         return isr;
 230 }
 231
 232 static void kw_i2c_do_stop(struct pmac_i2c_host_kw *host, int result)
 233 {
 234         kw_write_reg(reg_control, KW_I2C_CTL_STOP);
 235         host->state = state_stop;
 236         host->result = result;
 237 }
 238
 239
 240 static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr)
 241 {
 242         u8 ack;
 243
 244         DBG_LOW("kw_handle_interrupt(%s, isr: %x)\n",
 245                 __kw_state_names[host->state], isr);
 246
 247         if (host->state == state_idle) {
 248                 printk(KERN_WARNING "low_i2c: Keywest got an out of state"
 249                        " interrupt, ignoring\n");
 250                 kw_write_reg(reg_isr, isr);
 251                 return;
 252         }
 253
 254         if (isr == 0) {
 255                 printk(KERN_WARNING "low_i2c: Timeout in i2c transfer"
 256                        " on keywest !\n");
 257                 if (host->state != state_stop) {
 258                         kw_i2c_do_stop(host, -EIO);
 259                         return;
 260                 }
 261                 ack = kw_read_reg(reg_status);
 262                 if (ack & KW_I2C_STAT_BUSY)
 263                         kw_write_reg(reg_status, 0);
 264                 host->state = state_idle;
 265                 kw_write_reg(reg_ier, 0x00);
 266                 if (!host->polled)
 267                         complete(&host->complete);
 268                 return;
 269         }
 270
 271         if (isr & KW_I2C_IRQ_ADDR) {
 272                 ack = kw_read_reg(reg_status);
 273                 if (host->state != state_addr) {
 274                         WRONG_STATE("KW_I2C_IRQ_ADDR");
 275                         kw_i2c_do_stop(host, -EIO);
 276                 }
 277                 if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
 278                         host->result = -ENXIO;
 279                         host->state = state_stop;
 280                         DBG_LOW("KW: NAK on address\n");
 281                 } else {
 282                         if (host->len == 0)
 283                                 kw_i2c_do_stop(host, 0);
 284                         else if (host->rw) {
 285                                 host->state = state_read;
 286                                 if (host->len > 1)
 287                                         kw_write_reg(reg_control,
 288                                                      KW_I2C_CTL_AAK);
 289                         } else {
 290                                 host->state = state_write;
 291                                 kw_write_reg(reg_data, *(host->data++));
 292                                 host->len--;
 293                         }
 294                 }
 295                 kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
 296         }
 297
 298         if (isr & KW_I2C_IRQ_DATA) {
 299                 if (host->state == state_read) {
 300                         *(host->data++) = kw_read_reg(reg_data);
 301                         host->len--;
 302                         kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
 303                         if (host->len == 0)
 304                                 host->state = state_stop;
 305                         else if (host->len == 1)
 306                                 kw_write_reg(reg_control, 0);
 307                 } else if (host->state == state_write) {
 308                         ack = kw_read_reg(reg_status);
 309                         if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
 310                                 DBG_LOW("KW: nack on data write\n");
 311                                 host->result = -EFBIG;
 312                                 host->state = state_stop;
 313                         } else if (host->len) {
 314                                 kw_write_reg(reg_data, *(host->data++));
 315                                 host->len--;
 316                         } else
 317                                 kw_i2c_do_stop(host, 0);
 318                 } else {
 319                         WRONG_STATE("KW_I2C_IRQ_DATA");
 320                         if (host->state != state_stop)
 321                                 kw_i2c_do_stop(host, -EIO);
 322                 }
 323                 kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
 324         }
 325
 326         if (isr & KW_I2C_IRQ_STOP) {
 327                 kw_write_reg(reg_isr, KW_I2C_IRQ_STOP);
 328                 if (host->state != state_stop) {
 329                         WRONG_STATE("KW_I2C_IRQ_STOP");
 330                         host->result = -EIO;
 331                 }
 332                 host->state = state_idle;
 333                 if (!host->polled)
 334                         complete(&host->complete);
 335         }
 336
 337         /* Below should only happen in manual mode which we don't use ... */
 338         if (isr & KW_I2C_IRQ_START)
 339                 kw_write_reg(reg_isr, KW_I2C_IRQ_START);
 340
 341 }
 342
 343 /* Interrupt handler */
 344 static irqreturn_t kw_i2c_irq(int irq, void *dev_id)
 345 {
 346         struct pmac_i2c_host_kw *host = dev_id;
 347         unsigned long flags;
 348
 349         spin_lock_irqsave(&host->lock, flags);
 350         del_timer(&host->timeout_timer);
 351         kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr));
 352         if (host->state != state_idle) {
 353                 host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT;
 354                 add_timer(&host->timeout_timer);
 355         }
 356         spin_unlock_irqrestore(&host->lock, flags);
 357         return IRQ_HANDLED;
 358 }
 359
 360 static void kw_i2c_timeout(struct timer_list *t)
 361 {
 362         struct pmac_i2c_host_kw *host = from_timer(host, t, timeout_timer);
 363         unsigned long flags;
 364
 365         spin_lock_irqsave(&host->lock, flags);
 366
 367         /*
 368          * If the timer is pending, that means we raced with the
 369          * irq, in which case we just return
 370          */
 371         if (timer_pending(&host->timeout_timer))
 372                 goto skip;
 373
 374         kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr));
 375         if (host->state != state_idle) {
 376                 host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT;
 377                 add_timer(&host->timeout_timer);
 378         }
 379  skip:
 380         spin_unlock_irqrestore(&host->lock, flags);
 381 }
 382
 383 static int kw_i2c_open(struct pmac_i2c_bus *bus)
 384 {
 385         struct pmac_i2c_host_kw *host = bus->hostdata;
 386         mutex_lock(&host->mutex);
 387         return 0;
 388 }
 389
 390 static void kw_i2c_close(struct pmac_i2c_bus *bus)
 391 {
 392         struct pmac_i2c_host_kw *host = bus->hostdata;
 393         mutex_unlock(&host->mutex);
 394 }
 395
 396 static int kw_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
 397                        u32 subaddr, u8 *data, int len)
 398 {
 399         struct pmac_i2c_host_kw *host = bus->hostdata;
 400         u8 mode_reg = host->speed;
 401         int use_irq = host->irq && !bus->polled;
 402
 403         /* Setup mode & subaddress if any */
 404         switch(bus->mode) {
 405         case pmac_i2c_mode_dumb:
 406                 return -EINVAL;
 407         case pmac_i2c_mode_std:
 408                 mode_reg |= KW_I2C_MODE_STANDARD;
 409                 if (subsize != 0)
 410                         return -EINVAL;
 411                 break;
 412         case pmac_i2c_mode_stdsub:
 413                 mode_reg |= KW_I2C_MODE_STANDARDSUB;
 414                 if (subsize != 1)
 415                         return -EINVAL;
 416                 break;
 417         case pmac_i2c_mode_combined:
 418                 mode_reg |= KW_I2C_MODE_COMBINED;
 419                 if (subsize != 1)
 420                         return -EINVAL;
 421                 break;
 422         }
 423
 424         /* Setup channel & clear pending irqs */
 425         kw_write_reg(reg_isr, kw_read_reg(reg_isr));
 426         kw_write_reg(reg_mode, mode_reg | (bus->channel << 4));
 427         kw_write_reg(reg_status, 0);
 428
 429         /* Set up address and r/w bit, strip possible stale bus number from
 430          * address top bits
 431          */
 432         kw_write_reg(reg_addr, addrdir & 0xff);
 433
 434         /* Set up the sub address */
 435         if ((mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB
 436             || (mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED)
 437                 kw_write_reg(reg_subaddr, subaddr);
 438
 439         /* Prepare for async operations */
 440         host->data = data;
 441         host->len = len;
 442         host->state = state_addr;
 443         host->result = 0;
 444         host->rw = (addrdir & 1);
 445         host->polled = bus->polled;
 446
 447         /* Enable interrupt if not using polled mode and interrupt is
 448          * available
 449          */
 450         if (use_irq) {
 451                 /* Clear completion */
 452                 reinit_completion(&host->complete);
 453                 /* Ack stale interrupts */
 454                 kw_write_reg(reg_isr, kw_read_reg(reg_isr));
 455                 /* Arm timeout */
 456                 host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT;
 457                 add_timer(&host->timeout_timer);
 458                 /* Enable emission */
 459                 kw_write_reg(reg_ier, KW_I2C_IRQ_MASK);
 460         }
 461
 462         /* Start sending address */
 463         kw_write_reg(reg_control, KW_I2C_CTL_XADDR);
 464
 465         /* Wait for completion */
 466         if (use_irq)
 467                 wait_for_completion(&host->complete);
 468         else {
 469                 while(host->state != state_idle) {
 470                         unsigned long flags;
 471
 472                         u8 isr = kw_i2c_wait_interrupt(host);
 473                         spin_lock_irqsave(&host->lock, flags);
 474                         kw_i2c_handle_interrupt(host, isr);
 475                         spin_unlock_irqrestore(&host->lock, flags);
 476                 }
 477         }
 478
 479         /* Disable emission */
 480         kw_write_reg(reg_ier, 0);
 481
 482         return host->result;
 483 }
 484
 485 static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
 486 {
 487         struct pmac_i2c_host_kw *host;
 488         const u32               *psteps, *prate, *addrp;
 489         u32                     steps;
 490
 491         host = kzalloc(sizeof(*host), GFP_KERNEL);
 492         if (host == NULL) {
 493                 printk(KERN_ERR "low_i2c: Can't allocate host for %pOF\n",
 494                        np);
 495                 return NULL;
 496         }
 497
 498         /* Apple is kind enough to provide a valid AAPL,address property
 499          * on all i2c keywest nodes so far ... we would have to fallback
 500          * to macio parsing if that wasn't the case
 501          */
 502         addrp = of_get_property(np, "AAPL,address", NULL);
 503         if (addrp == NULL) {
 504                 printk(KERN_ERR "low_i2c: Can't find address for %pOF\n",
 505                        np);
 506                 kfree(host);
 507                 return NULL;
 508         }
 509         mutex_init(&host->mutex);
 510         init_completion(&host->complete);
 511         spin_lock_init(&host->lock);
 512         timer_setup(&host->timeout_timer, kw_i2c_timeout, 0);
 513
 514         psteps = of_get_property(np, "AAPL,address-step", NULL);
 515         steps = psteps ? (*psteps) : 0x10;
 516         for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++)
 517                 steps >>= 1;
 518         /* Select interface rate */
 519         host->speed = KW_I2C_MODE_25KHZ;
 520         prate = of_get_property(np, "AAPL,i2c-rate", NULL);
 521         if (prate) switch(*prate) {
 522         case 100:
 523                 host->speed = KW_I2C_MODE_100KHZ;
 524                 break;
 525         case 50:
 526                 host->speed = KW_I2C_MODE_50KHZ;
 527                 break;
 528         case 25:
 529                 host->speed = KW_I2C_MODE_25KHZ;
 530                 break;
 531         }
 532         host->irq = irq_of_parse_and_map(np, 0);
 533         if (!host->irq)
 534                 printk(KERN_WARNING
 535                        "low_i2c: Failed to map interrupt for %pOF\n",
 536                        np);
 537
 538         host->base = ioremap((*addrp), 0x1000);
 539         if (host->base == NULL) {
 540                 printk(KERN_ERR "low_i2c: Can't map registers for %pOF\n",
 541                        np);
 542                 kfree(host);
 543                 return NULL;
 544         }
 545
 546         /* Make sure IRQ is disabled */
 547         kw_write_reg(reg_ier, 0);
 548
 549         /* Request chip interrupt. We set IRQF_NO_SUSPEND because we don't
 550          * want that interrupt disabled between the 2 passes of driver
 551          * suspend or we'll have issues running the pfuncs
 552          */
 553         if (request_irq(host->irq, kw_i2c_irq, IRQF_NO_SUSPEND,
 554                         "keywest i2c", host))
 555                 host->irq = 0;
 556
 557         printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %pOF\n",
 558                *addrp, host->irq, np);
 559
 560         return host;
 561 }
 562
 563
 564 static void __init kw_i2c_add(struct pmac_i2c_host_kw *host,
 565                               struct device_node *controller,
 566                               struct device_node *busnode,
 567                               int channel)
 568 {
 569         struct pmac_i2c_bus *bus;
 570
 571         bus = kzalloc(sizeof(struct pmac_i2c_bus), GFP_KERNEL);
 572         if (bus == NULL)
 573                 return;
 574
 575         bus->controller = of_node_get(controller);
 576         bus->busnode = of_node_get(busnode);
 577         bus->type = pmac_i2c_bus_keywest;
 578         bus->hostdata = host;
 579         bus->channel = channel;
 580         bus->mode = pmac_i2c_mode_std;
 581         bus->open = kw_i2c_open;
 582         bus->close = kw_i2c_close;
 583         bus->xfer = kw_i2c_xfer;
 584         mutex_init(&bus->mutex);
 585         lockdep_register_key(&bus->lock_key);
 586         lockdep_set_class(&bus->mutex, &bus->lock_key);
 587         if (controller == busnode)
 588                 bus->flags = pmac_i2c_multibus;
 589         list_add(&bus->link, &pmac_i2c_busses);
 590
 591         printk(KERN_INFO " channel %d bus %s\n", channel,
 592                (controller == busnode) ? "<multibus>" : busnode->full_name);
 593 }
 594
 595 static void __init kw_i2c_probe(void)
 596 {
 597         struct device_node *np, *child, *parent;
 598
 599         /* Probe keywest-i2c busses */
 600         for_each_compatible_node(np, "i2c","keywest-i2c") {
 601                 struct pmac_i2c_host_kw *host;
 602                 int multibus;
 603
 604                 /* Found one, init a host structure */
 605                 host = kw_i2c_host_init(np);
 606                 if (host == NULL)
 607                         continue;
 608
 609                 /* Now check if we have a multibus setup (old style) or if we
 610                  * have proper bus nodes. Note that the "new" way (proper bus
 611                  * nodes) might cause us to not create some busses that are
 612                  * kept hidden in the device-tree. In the future, we might
 613                  * want to work around that by creating busses without a node
 614                  * but not for now
 615                  */
 616                 child = of_get_next_child(np, NULL);
 617                 multibus = !of_node_name_eq(child, "i2c-bus");
 618                 of_node_put(child);
 619
 620                 /* For a multibus setup, we get the bus count based on the
 621                  * parent type
 622                  */
 623                 if (multibus) {
 624                         int chans, i;
 625
 626                         parent = of_get_parent(np);
 627                         if (parent == NULL)
 628                                 continue;
 629                         chans = parent->name[0] == 'u' ? 2 : 1;
 630                         of_node_put(parent);
 631                         for (i = 0; i < chans; i++)
 632                                 kw_i2c_add(host, np, np, i);
 633                 } else {
 634                         for_each_child_of_node(np, child) {
 635                                 const u32 *reg = of_get_property(child,
 636                                                 "reg", NULL);
 637                                 if (reg == NULL)
 638                                         continue;
 639                                 kw_i2c_add(host, np, child, *reg);
 640                         }
 641                 }
 642         }
 643 }
 644
 645
 646 /*
 647  *
 648  * PMU implementation
 649  *
 650  */
 651
 652 #ifdef CONFIG_ADB_PMU
 653
 654 /*
 655  * i2c command block to the PMU
 656  */
 657 struct pmu_i2c_hdr {
 658         u8      bus;
 659         u8      mode;
 660         u8      bus2;
 661         u8      address;
 662         u8      sub_addr;
 663         u8      comb_addr;
 664         u8      count;
 665         u8      data[];
 666 };
 667
 668 static void pmu_i2c_complete(struct adb_request *req)
 669 {
 670         complete(req->arg);
 671 }
 672
 673 static int pmu_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
 674                         u32 subaddr, u8 *data, int len)
 675 {
 676         struct adb_request *req = bus->hostdata;
 677         struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req->data[1];
 678         struct completion comp;
 679         int read = addrdir & 1;
 680         int retry;
 681         int rc = 0;
 682
 683         /* For now, limit ourselves to 16 bytes transfers */
 684         if (len > 16)
 685                 return -EINVAL;
 686
 687         init_completion(&comp);
 688
 689         for (retry = 0; retry < 16; retry++) {
 690                 memset(req, 0, sizeof(struct adb_request));
 691                 hdr->bus = bus->channel;
 692                 hdr->count = len;
 693
 694                 switch(bus->mode) {
 695                 case pmac_i2c_mode_std:
 696                         if (subsize != 0)
 697                                 return -EINVAL;
 698                         hdr->address = addrdir;
 699                         hdr->mode = PMU_I2C_MODE_SIMPLE;
 700                         break;
 701                 case pmac_i2c_mode_stdsub:
 702                 case pmac_i2c_mode_combined:
 703                         if (subsize != 1)
 704                                 return -EINVAL;
 705                         hdr->address = addrdir & 0xfe;
 706                         hdr->comb_addr = addrdir;
 707                         hdr->sub_addr = subaddr;
 708                         if (bus->mode == pmac_i2c_mode_stdsub)
 709                                 hdr->mode = PMU_I2C_MODE_STDSUB;
 710                         else
 711                                 hdr->mode = PMU_I2C_MODE_COMBINED;
 712                         break;
 713                 default:
 714                         return -EINVAL;
 715                 }
 716
 717                 reinit_completion(&comp);
 718                 req->data[0] = PMU_I2C_CMD;
 719                 req->reply[0] = 0xff;
 720                 req->nbytes = sizeof(struct pmu_i2c_hdr) + 1;
 721                 req->done = pmu_i2c_complete;
 722                 req->arg = &comp;
 723                 if (!read && len) {
 724                         memcpy(hdr->data, data, len);
 725                         req->nbytes += len;
 726                 }
 727                 rc = pmu_queue_request(req);
 728                 if (rc)
 729                         return rc;
 730                 wait_for_completion(&comp);
 731                 if (req->reply[0] == PMU_I2C_STATUS_OK)
 732                         break;
 733                 msleep(15);
 734         }
 735         if (req->reply[0] != PMU_I2C_STATUS_OK)
 736                 return -EIO;
 737
 738         for (retry = 0; retry < 16; retry++) {
 739                 memset(req, 0, sizeof(struct adb_request));
 740
 741                 /* I know that looks like a lot, slow as hell, but darwin
 742                  * does it so let's be on the safe side for now
 743                  */
 744                 msleep(15);
 745
 746                 hdr->bus = PMU_I2C_BUS_STATUS;
 747
 748                 reinit_completion(&comp);
 749                 req->data[0] = PMU_I2C_CMD;
 750                 req->reply[0] = 0xff;
 751                 req->nbytes = 2;
 752                 req->done = pmu_i2c_complete;
 753                 req->arg = &comp;
 754                 rc = pmu_queue_request(req);
 755                 if (rc)
 756                         return rc;
 757                 wait_for_completion(&comp);
 758
 759                 if (req->reply[0] == PMU_I2C_STATUS_OK && !read)
 760                         return 0;
 761                 if (req->reply[0] == PMU_I2C_STATUS_DATAREAD && read) {
 762                         int rlen = req->reply_len - 1;
 763
 764                         if (rlen != len) {
 765                                 printk(KERN_WARNING "low_i2c: PMU returned %d"
 766                                        " bytes, expected %d !\n", rlen, len);
 767                                 return -EIO;
 768                         }
 769                         if (len)
 770                                 memcpy(data, &req->reply[1], len);
 771                         return 0;
 772                 }
 773         }
 774         return -EIO;
 775 }
 776
 777 static void __init pmu_i2c_probe(void)
 778 {
 779         struct pmac_i2c_bus *bus;
 780         struct device_node *busnode;
 781         int channel, sz;
 782
 783         if (!pmu_present())
 784                 return;
 785
 786         /* There might or might not be a "pmu-i2c" node, we use that
 787          * or via-pmu itself, whatever we find. I haven't seen a machine
 788          * with separate bus nodes, so we assume a multibus setup
 789          */
 790         busnode = of_find_node_by_name(NULL, "pmu-i2c");
 791         if (busnode == NULL)
 792                 busnode = of_find_node_by_name(NULL, "via-pmu");
 793         if (busnode == NULL)
 794                 return;
 795
 796         printk(KERN_INFO "PMU i2c %pOF\n", busnode);
 797
 798         /*
 799          * We add bus 1 and 2 only for now, bus 0 is "special"
 800          */
 801         for (channel = 1; channel <= 2; channel++) {
 802                 sz = sizeof(struct pmac_i2c_bus) + sizeof(struct adb_request);
 803                 bus = kzalloc(sz, GFP_KERNEL);
 804                 if (bus == NULL)
 805                         return;
 806
 807                 bus->controller = busnode;
 808                 bus->busnode = busnode;
 809                 bus->type = pmac_i2c_bus_pmu;
 810                 bus->channel = channel;
 811                 bus->mode = pmac_i2c_mode_std;
 812                 bus->hostdata = bus + 1;
 813                 bus->xfer = pmu_i2c_xfer;
 814                 mutex_init(&bus->mutex);
 815                 lockdep_register_key(&bus->lock_key);
 816                 lockdep_set_class(&bus->mutex, &bus->lock_key);
 817                 bus->flags = pmac_i2c_multibus;
 818                 list_add(&bus->link, &pmac_i2c_busses);
 819
 820                 printk(KERN_INFO " channel %d bus <multibus>\n", channel);
 821         }
 822 }
 823
 824 #endif /* CONFIG_ADB_PMU */
 825
 826
 827 /*
 828  *
 829  * SMU implementation
 830  *
 831  */
 832
 833 #ifdef CONFIG_PMAC_SMU
 834
 835 static void smu_i2c_complete(struct smu_i2c_cmd *cmd, void *misc)
 836 {
 837         complete(misc);
 838 }
 839
 840 static int smu_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
 841                         u32 subaddr, u8 *data, int len)
 842 {
 843         struct smu_i2c_cmd *cmd = bus->hostdata;
 844         struct completion comp;
 845         int read = addrdir & 1;
 846         int rc = 0;
 847
 848         if ((read && len > SMU_I2C_READ_MAX) ||
 849             ((!read) && len > SMU_I2C_WRITE_MAX))
 850                 return -EINVAL;
 851
 852         memset(cmd, 0, sizeof(struct smu_i2c_cmd));
 853         cmd->info.bus = bus->channel;
 854         cmd->info.devaddr = addrdir;
 855         cmd->info.datalen = len;
 856
 857         switch(bus->mode) {
 858         case pmac_i2c_mode_std:
 859                 if (subsize != 0)
 860                         return -EINVAL;
 861                 cmd->info.type = SMU_I2C_TRANSFER_SIMPLE;
 862                 break;
 863         case pmac_i2c_mode_stdsub:
 864         case pmac_i2c_mode_combined:
 865                 if (subsize > 3 || subsize < 1)
 866                         return -EINVAL;
 867                 cmd->info.sublen = subsize;
 868                 /* that's big-endian only but heh ! */
 869                 memcpy(&cmd->info.subaddr, ((char *)&subaddr) + (4 - subsize),
 870                        subsize);
 871                 if (bus->mode == pmac_i2c_mode_stdsub)
 872                         cmd->info.type = SMU_I2C_TRANSFER_STDSUB;
 873                 else
 874                         cmd->info.type = SMU_I2C_TRANSFER_COMBINED;
 875                 break;
 876         default:
 877                 return -EINVAL;
 878         }
 879         if (!read && len)
 880                 memcpy(cmd->info.data, data, len);
 881
 882         init_completion(&comp);
 883         cmd->done = smu_i2c_complete;
 884         cmd->misc = &comp;
 885         rc = smu_queue_i2c(cmd);
 886         if (rc < 0)
 887                 return rc;
 888         wait_for_completion(&comp);
 889         rc = cmd->status;
 890
 891         if (read && len)
 892                 memcpy(data, cmd->info.data, len);
 893         return rc < 0 ? rc : 0;
 894 }
 895
 896 static void __init smu_i2c_probe(void)
 897 {
 898         struct device_node *controller, *busnode;
 899         struct pmac_i2c_bus *bus;
 900         const u32 *reg;
 901         int sz;
 902
 903         if (!smu_present())
 904                 return;
 905
 906         controller = of_find_node_by_name(NULL, "smu-i2c-control");
 907         if (controller == NULL)
 908                 controller = of_find_node_by_name(NULL, "smu");
 909         if (controller == NULL)
 910                 return;
 911
 912         printk(KERN_INFO "SMU i2c %pOF\n", controller);
 913
 914         /* Look for childs, note that they might not be of the right
 915          * type as older device trees mix i2c busses and other things
 916          * at the same level
 917          */
 918         for_each_child_of_node(controller, busnode) {
 919                 if (!of_node_is_type(busnode, "i2c") &&
 920                     !of_node_is_type(busnode, "i2c-bus"))
 921                         continue;
 922                 reg = of_get_property(busnode, "reg", NULL);
 923                 if (reg == NULL)
 924                         continue;
 925
 926                 sz = sizeof(struct pmac_i2c_bus) + sizeof(struct smu_i2c_cmd);
 927                 bus = kzalloc(sz, GFP_KERNEL);
 928                 if (bus == NULL) {
 929                         of_node_put(busnode);
 930                         return;
 931                 }
 932
 933                 bus->controller = controller;
 934                 bus->busnode = of_node_get(busnode);
 935                 bus->type = pmac_i2c_bus_smu;
 936                 bus->channel = *reg;
 937                 bus->mode = pmac_i2c_mode_std;
 938                 bus->hostdata = bus + 1;
 939                 bus->xfer = smu_i2c_xfer;
 940                 mutex_init(&bus->mutex);
 941                 lockdep_register_key(&bus->lock_key);
 942                 lockdep_set_class(&bus->mutex, &bus->lock_key);
 943                 bus->flags = 0;
 944                 list_add(&bus->link, &pmac_i2c_busses);
 945
 946                 printk(KERN_INFO " channel %x bus %pOF\n",
 947                        bus->channel, busnode);
 948         }
 949 }
 950
 951 #endif /* CONFIG_PMAC_SMU */
 952
 953 /*
 954  *
 955  * Core code
 956  *
 957  */
 958
 959
 960 struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node)
 961 {
 962         struct device_node *p = of_node_get(node);
 963         struct device_node *prev = NULL;
 964         struct pmac_i2c_bus *bus;
 965
 966         while(p) {
 967                 list_for_each_entry(bus, &pmac_i2c_busses, link) {
 968                         if (p == bus->busnode) {
 969                                 if (prev && bus->flags & pmac_i2c_multibus) {
 970                                         const u32 *reg;
 971                                         reg = of_get_property(prev, "reg",
 972                                                                 NULL);
 973                                         if (!reg)
 974                                                 continue;
 975                                         if (((*reg) >> 8) != bus->channel)
 976                                                 continue;
 977                                 }
 978                                 of_node_put(p);
 979                                 of_node_put(prev);
 980                                 return bus;
 981                         }
 982                 }
 983                 of_node_put(prev);
 984                 prev = p;
 985                 p = of_get_parent(p);
 986         }
 987         return NULL;
 988 }
 989 EXPORT_SYMBOL_GPL(pmac_i2c_find_bus);
 990
 991 u8 pmac_i2c_get_dev_addr(struct device_node *device)
 992 {
 993         const u32 *reg = of_get_property(device, "reg", NULL);
 994
 995         if (reg == NULL)
 996                 return 0;
 997
 998         return (*reg) & 0xff;
 999 }
1000 EXPORT_SYMBOL_GPL(pmac_i2c_get_dev_addr);
1001
1002 struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus)
1003 {
1004         return bus->controller;
1005 }
1006 EXPORT_SYMBOL_GPL(pmac_i2c_get_controller);
1007
1008 struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus)
1009 {
1010         return bus->busnode;
1011 }
1012 EXPORT_SYMBOL_GPL(pmac_i2c_get_bus_node);
1013
1014 int pmac_i2c_get_type(struct pmac_i2c_bus *bus)
1015 {
1016         return bus->type;
1017 }
1018 EXPORT_SYMBOL_GPL(pmac_i2c_get_type);
1019
1020 int pmac_i2c_get_flags(struct pmac_i2c_bus *bus)
1021 {
1022         return bus->flags;
1023 }
1024 EXPORT_SYMBOL_GPL(pmac_i2c_get_flags);
1025
1026 int pmac_i2c_get_channel(struct pmac_i2c_bus *bus)
1027 {
1028         return bus->channel;
1029 }
1030 EXPORT_SYMBOL_GPL(pmac_i2c_get_channel);
1031
1032
1033 struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus)
1034 {
1035         return &bus->adapter;
1036 }
1037 EXPORT_SYMBOL_GPL(pmac_i2c_get_adapter);
1038
1039 struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter)
1040 {
1041         struct pmac_i2c_bus *bus;
1042
1043         list_for_each_entry(bus, &pmac_i2c_busses, link)
1044                 if (&bus->adapter == adapter)
1045                         return bus;
1046         return NULL;
1047 }
1048 EXPORT_SYMBOL_GPL(pmac_i2c_adapter_to_bus);
1049
1050 int pmac_i2c_match_adapter(struct device_node *dev, struct i2c_adapter *adapter)
1051 {
1052         struct pmac_i2c_bus *bus = pmac_i2c_find_bus(dev);
1053
1054         if (bus == NULL)
1055                 return 0;
1056         return (&bus->adapter == adapter);
1057 }
1058 EXPORT_SYMBOL_GPL(pmac_i2c_match_adapter);
1059
1060 int pmac_low_i2c_lock(struct device_node *np)
1061 {
1062         struct pmac_i2c_bus *bus, *found = NULL;
1063
1064         list_for_each_entry(bus, &pmac_i2c_busses, link) {
1065                 if (np == bus->controller) {
1066                         found = bus;
1067                         break;
1068                 }
1069         }
1070         if (!found)
1071                 return -ENODEV;
1072         return pmac_i2c_open(bus, 0);
1073 }
1074 EXPORT_SYMBOL_GPL(pmac_low_i2c_lock);
1075
1076 int pmac_low_i2c_unlock(struct device_node *np)
1077 {
1078         struct pmac_i2c_bus *bus, *found = NULL;
1079
1080         list_for_each_entry(bus, &pmac_i2c_busses, link) {
1081                 if (np == bus->controller) {
1082                         found = bus;
1083                         break;
1084                 }
1085         }
1086         if (!found)
1087                 return -ENODEV;
1088         pmac_i2c_close(bus);
1089         return 0;
1090 }
1091 EXPORT_SYMBOL_GPL(pmac_low_i2c_unlock);
1092
1093
1094 int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled)
1095 {
1096         int rc;
1097
1098         mutex_lock(&bus->mutex);
1099         bus->polled = polled || pmac_i2c_force_poll;
1100         bus->opened = 1;
1101         bus->mode = pmac_i2c_mode_std;
1102         if (bus->open && (rc = bus->open(bus)) != 0) {
1103                 bus->opened = 0;
1104                 mutex_unlock(&bus->mutex);
1105                 return rc;
1106         }
1107         return 0;
1108 }
1109 EXPORT_SYMBOL_GPL(pmac_i2c_open);
1110
1111 void pmac_i2c_close(struct pmac_i2c_bus *bus)
1112 {
1113         WARN_ON(!bus->opened);
1114         if (bus->close)
1115                 bus->close(bus);
1116         bus->opened = 0;
1117         mutex_unlock(&bus->mutex);
1118 }
1119 EXPORT_SYMBOL_GPL(pmac_i2c_close);
1120
1121 int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode)
1122 {
1123         WARN_ON(!bus->opened);
1124
1125         /* Report me if you see the error below as there might be a new
1126          * "combined4" mode that I need to implement for the SMU bus
1127          */
1128         if (mode < pmac_i2c_mode_dumb || mode > pmac_i2c_mode_combined) {
1129                 printk(KERN_ERR "low_i2c: Invalid mode %d requested on"
1130                        " bus %pOF !\n", mode, bus->busnode);
1131                 return -EINVAL;
1132         }
1133         bus->mode = mode;
1134
1135         return 0;
1136 }
1137 EXPORT_SYMBOL_GPL(pmac_i2c_setmode);
1138
1139 int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
1140                   u32 subaddr, u8 *data, int len)
1141 {
1142         int rc;
1143
1144         WARN_ON(!bus->opened);
1145
1146         DBG("xfer() chan=%d, addrdir=0x%x, mode=%d, subsize=%d, subaddr=0x%x,"
1147             " %d bytes, bus %pOF\n", bus->channel, addrdir, bus->mode, subsize,
1148             subaddr, len, bus->busnode);
1149
1150         rc = bus->xfer(bus, addrdir, subsize, subaddr, data, len);
1151
1152 #ifdef DEBUG
1153         if (rc)
1154                 DBG("xfer error %d\n", rc);
1155 #endif
1156         return rc;
1157 }
1158 EXPORT_SYMBOL_GPL(pmac_i2c_xfer);
1159
1160 /* some quirks for platform function decoding */
1161 enum {
1162         pmac_i2c_quirk_invmask = 0x00000001u,
1163         pmac_i2c_quirk_skip = 0x00000002u,
1164 };
1165
1166 static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
1167                                               int quirks))
1168 {
1169         struct pmac_i2c_bus *bus;
1170         struct device_node *np;
1171         static struct whitelist_ent {
1172                 char *name;
1173                 char *compatible;
1174                 int quirks;
1175         } whitelist[] = {
1176                 /* XXX Study device-tree's & apple drivers are get the quirks
1177                  * right !
1178                  */
1179                 /* Workaround: It seems that running the clockspreading
1180                  * properties on the eMac will cause lockups during boot.
1181                  * The machine seems to work fine without that. So for now,
1182                  * let's make sure i2c-hwclock doesn't match about "imic"
1183                  * clocks and we'll figure out if we really need to do
1184                  * something special about those later.
1185                  */
1186                 { "i2c-hwclock", "imic5002", pmac_i2c_quirk_skip },
1187                 { "i2c-hwclock", "imic5003", pmac_i2c_quirk_skip },
1188                 { "i2c-hwclock", NULL, pmac_i2c_quirk_invmask },
1189                 { "i2c-cpu-voltage", NULL, 0},
1190                 {  "temp-monitor", NULL, 0 },
1191                 {  "supply-monitor", NULL, 0 },
1192                 { NULL, NULL, 0 },
1193         };
1194
1195         /* Only some devices need to have platform functions instantiated
1196          * here. For now, we have a table. Others, like 9554 i2c GPIOs used
1197          * on Xserve, if we ever do a driver for them, will use their own
1198          * platform function instance
1199          */
1200         list_for_each_entry(bus, &pmac_i2c_busses, link) {
1201                 for_each_child_of_node(bus->busnode, np) {
1202                         struct whitelist_ent *p;
1203                         /* If multibus, check if device is on that bus */
1204                         if (bus->flags & pmac_i2c_multibus)
1205                                 if (bus != pmac_i2c_find_bus(np))
1206                                         continue;
1207                         for (p = whitelist; p->name != NULL; p++) {
1208                                 if (!of_node_name_eq(np, p->name))
1209                                         continue;
1210                                 if (p->compatible &&
1211                                     !of_device_is_compatible(np, p->compatible))
1212                                         continue;
1213                                 if (p->quirks & pmac_i2c_quirk_skip)
1214                                         break;
1215                                 callback(np, p->quirks);
1216                                 break;
1217                         }
1218                 }
1219         }
1220 }
1221
1222 #define MAX_I2C_DATA    64
1223
1224 struct pmac_i2c_pf_inst
1225 {
1226         struct pmac_i2c_bus     *bus;
1227         u8                      addr;
1228         u8                      buffer[MAX_I2C_DATA];
1229         u8                      scratch[MAX_I2C_DATA];
1230         int                     bytes;
1231         int                     quirks;
1232 };
1233
1234 static void* pmac_i2c_do_begin(struct pmf_function *func, struct pmf_args *args)
1235 {
1236         struct pmac_i2c_pf_inst *inst;
1237         struct pmac_i2c_bus     *bus;
1238
1239         bus = pmac_i2c_find_bus(func->node);
1240         if (bus == NULL) {
1241                 printk(KERN_ERR "low_i2c: Can't find bus for %pOF (pfunc)\n",
1242                        func->node);
1243                 return NULL;
1244         }
1245         if (pmac_i2c_open(bus, 0)) {
1246                 printk(KERN_ERR "low_i2c: Can't open i2c bus for %pOF (pfunc)\n",
1247                        func->node);
1248                 return NULL;
1249         }
1250
1251         /* XXX might need GFP_ATOMIC when called during the suspend process,
1252          * but then, there are already lots of issues with suspending when
1253          * near OOM that need to be resolved, the allocator itself should
1254          * probably make GFP_NOIO implicit during suspend
1255          */
1256         inst = kzalloc(sizeof(struct pmac_i2c_pf_inst), GFP_KERNEL);
1257         if (inst == NULL) {
1258                 pmac_i2c_close(bus);
1259                 return NULL;
1260         }
1261         inst->bus = bus;
1262         inst->addr = pmac_i2c_get_dev_addr(func->node);
1263         inst->quirks = (int)(long)func->driver_data;
1264         return inst;
1265 }
1266
1267 static void pmac_i2c_do_end(struct pmf_function *func, void *instdata)
1268 {
1269         struct pmac_i2c_pf_inst *inst = instdata;
1270
1271         if (inst == NULL)
1272                 return;
1273         pmac_i2c_close(inst->bus);
1274         kfree(inst);
1275 }
1276
1277 static int pmac_i2c_do_read(PMF_STD_ARGS, u32 len)
1278 {
1279         struct pmac_i2c_pf_inst *inst = instdata;
1280
1281         inst->bytes = len;
1282         return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_read, 0, 0,
1283                              inst->buffer, len);
1284 }
1285
1286 static int pmac_i2c_do_write(PMF_STD_ARGS, u32 len, const u8 *data)
1287 {
1288         struct pmac_i2c_pf_inst *inst = instdata;
1289
1290         return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 0, 0,
1291                              (u8 *)data, len);
1292 }
1293
1294 /* This function is used to do the masking & OR'ing for the "rmw" type
1295  * callbacks. Ze should apply the mask and OR in the values in the
1296  * buffer before writing back. The problem is that it seems that
1297  * various darwin drivers implement the mask/or differently, thus
1298  * we need to check the quirks first
1299  */
1300 static void pmac_i2c_do_apply_rmw(struct pmac_i2c_pf_inst *inst,
1301                                   u32 len, const u8 *mask, const u8 *val)
1302 {
1303         int i;
1304
1305         if (inst->quirks & pmac_i2c_quirk_invmask) {
1306                 for (i = 0; i < len; i ++)
1307                         inst->scratch[i] = (inst->buffer[i] & mask[i]) | val[i];
1308         } else {
1309                 for (i = 0; i < len; i ++)
1310                         inst->scratch[i] = (inst->buffer[i] & ~mask[i])
1311                                 | (val[i] & mask[i]);
1312         }
1313 }
1314
1315 static int pmac_i2c_do_rmw(PMF_STD_ARGS, u32 masklen, u32 valuelen,
1316                            u32 totallen, const u8 *maskdata,
1317                            const u8 *valuedata)
1318 {
1319         struct pmac_i2c_pf_inst *inst = instdata;
1320
1321         if (masklen > inst->bytes || valuelen > inst->bytes ||
1322             totallen > inst->bytes || valuelen > masklen)
1323                 return -EINVAL;
1324
1325         pmac_i2c_do_apply_rmw(inst, masklen, maskdata, valuedata);
1326
1327         return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 0, 0,
1328                              inst->scratch, totallen);
1329 }
1330
1331 static int pmac_i2c_do_read_sub(PMF_STD_ARGS, u8 subaddr, u32 len)
1332 {
1333         struct pmac_i2c_pf_inst *inst = instdata;
1334
1335         inst->bytes = len;
1336         return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_read, 1, subaddr,
1337                              inst->buffer, len);
1338 }
1339
1340 static int pmac_i2c_do_write_sub(PMF_STD_ARGS, u8 subaddr, u32 len,
1341                                      const u8 *data)
1342 {
1343         struct pmac_i2c_pf_inst *inst = instdata;
1344
1345         return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 1,
1346                              subaddr, (u8 *)data, len);
1347 }
1348
1349 static int pmac_i2c_do_set_mode(PMF_STD_ARGS, int mode)
1350 {
1351         struct pmac_i2c_pf_inst *inst = instdata;
1352
1353         return pmac_i2c_setmode(inst->bus, mode);
1354 }
1355
1356 static int pmac_i2c_do_rmw_sub(PMF_STD_ARGS, u8 subaddr, u32 masklen,
1357                                u32 valuelen, u32 totallen, const u8 *maskdata,
1358                                const u8 *valuedata)
1359 {
1360         struct pmac_i2c_pf_inst *inst = instdata;
1361
1362         if (masklen > inst->bytes || valuelen > inst->bytes ||
1363             totallen > inst->bytes || valuelen > masklen)
1364                 return -EINVAL;
1365
1366         pmac_i2c_do_apply_rmw(inst, masklen, maskdata, valuedata);
1367
1368         return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 1,
1369                              subaddr, inst->scratch, totallen);
1370 }
1371
1372 static int pmac_i2c_do_mask_and_comp(PMF_STD_ARGS, u32 len,
1373                                      const u8 *maskdata,
1374                                      const u8 *valuedata)
1375 {
1376         struct pmac_i2c_pf_inst *inst = instdata;
1377         int i, match;
1378
1379         /* Get return value pointer, it's assumed to be a u32 */
1380         if (!args || !args->count || !args->u[0].p)
1381                 return -EINVAL;
1382
1383         /* Check buffer */
1384         if (len > inst->bytes)
1385                 return -EINVAL;
1386
1387         for (i = 0, match = 1; match && i < len; i ++)
1388                 if ((inst->buffer[i] & maskdata[i]) != valuedata[i])
1389                         match = 0;
1390         *args->u[0].p = match;
1391         return 0;
1392 }
1393
1394 static int pmac_i2c_do_delay(PMF_STD_ARGS, u32 duration)
1395 {
1396         msleep((duration + 999) / 1000);
1397         return 0;
1398 }
1399
1400
1401 static struct pmf_handlers pmac_i2c_pfunc_handlers = {
1402         .begin                  = pmac_i2c_do_begin,
1403         .end                    = pmac_i2c_do_end,
1404         .read_i2c               = pmac_i2c_do_read,
1405         .write_i2c              = pmac_i2c_do_write,
1406         .rmw_i2c                = pmac_i2c_do_rmw,
1407         .read_i2c_sub           = pmac_i2c_do_read_sub,
1408         .write_i2c_sub          = pmac_i2c_do_write_sub,
1409         .rmw_i2c_sub            = pmac_i2c_do_rmw_sub,
1410         .set_i2c_mode           = pmac_i2c_do_set_mode,
1411         .mask_and_compare       = pmac_i2c_do_mask_and_comp,
1412         .delay                  = pmac_i2c_do_delay,
1413 };
1414
1415 static void __init pmac_i2c_dev_create(struct device_node *np, int quirks)
1416 {
1417         DBG("dev_create(%pOF)\n", np);
1418
1419         pmf_register_driver(np, &pmac_i2c_pfunc_handlers,
1420                             (void *)(long)quirks);
1421 }
1422
1423 static void __init pmac_i2c_dev_init(struct device_node *np, int quirks)
1424 {
1425         DBG("dev_create(%pOF)\n", np);
1426
1427         pmf_do_functions(np, NULL, 0, PMF_FLAGS_ON_INIT, NULL);
1428 }
1429
1430 static void pmac_i2c_dev_suspend(struct device_node *np, int quirks)
1431 {
1432         DBG("dev_suspend(%pOF)\n", np);
1433         pmf_do_functions(np, NULL, 0, PMF_FLAGS_ON_SLEEP, NULL);
1434 }
1435
1436 static void pmac_i2c_dev_resume(struct device_node *np, int quirks)
1437 {
1438         DBG("dev_resume(%pOF)\n", np);
1439         pmf_do_functions(np, NULL, 0, PMF_FLAGS_ON_WAKE, NULL);
1440 }
1441
1442 void pmac_pfunc_i2c_suspend(void)
1443 {
1444         pmac_i2c_devscan(pmac_i2c_dev_suspend);
1445 }
1446
1447 void pmac_pfunc_i2c_resume(void)
1448 {
1449         pmac_i2c_devscan(pmac_i2c_dev_resume);
1450 }
1451
1452 /*
1453  * Initialize us: probe all i2c busses on the machine, instantiate
1454  * busses and platform functions as needed.
1455  */
1456 /* This is non-static as it might be called early by smp code */
1457 int __init pmac_i2c_init(void)
1458 {
1459         static int i2c_inited;
1460
1461         if (i2c_inited)
1462                 return 0;
1463         i2c_inited = 1;
1464
1465         /* Probe keywest-i2c busses */
1466         kw_i2c_probe();
1467
1468 #ifdef CONFIG_ADB_PMU
1469         /* Probe PMU i2c busses */
1470         pmu_i2c_probe();
1471 #endif
1472
1473 #ifdef CONFIG_PMAC_SMU
1474         /* Probe SMU i2c busses */
1475         smu_i2c_probe();
1476 #endif
1477
1478         /* Now add platform functions for some known devices */
1479         pmac_i2c_devscan(pmac_i2c_dev_create);
1480
1481         return 0;
1482 }
1483 machine_arch_initcall(powermac, pmac_i2c_init);
1484
1485 /* Since pmac_i2c_init can be called too early for the platform device
1486  * registration, we need to do it at a later time. In our case, subsys
1487  * happens to fit well, though I agree it's a bit of a hack...
1488  */
1489 static int __init pmac_i2c_create_platform_devices(void)
1490 {
1491         struct pmac_i2c_bus *bus;
1492         int i = 0;
1493
1494         /* In the case where we are initialized from smp_init(), we must
1495          * not use the timer (and thus the irq). It's safe from now on
1496          * though
1497          */
1498         pmac_i2c_force_poll = 0;
1499
1500         /* Create platform devices */
1501         list_for_each_entry(bus, &pmac_i2c_busses, link) {
1502                 bus->platform_dev =
1503                         platform_device_alloc("i2c-powermac", i++);
1504                 if (bus->platform_dev == NULL)
1505                         return -ENOMEM;
1506                 bus->platform_dev->dev.platform_data = bus;
1507                 bus->platform_dev->dev.of_node = bus->busnode;
1508                 platform_device_add(bus->platform_dev);
1509         }
1510
1511         /* Now call platform "init" functions */
1512         pmac_i2c_devscan(pmac_i2c_dev_init);
1513
1514         return 0;
1515 }
1516 machine_subsys_initcall(powermac, pmac_i2c_create_platform_devices);