1 // SPDX-License-Identifier: GPL-2.0-or-later
5 * (C) Copyright IBM Corp. 2005
7 * Author: Mark Nutter <mnutter@us.ibm.com>
9 * Host-side part of SPU context switch sequence outlined in
10 * Synergistic Processor Element, Book IV.
12 * A fully premptive switch of an SPE is very expensive in terms
13 * of time and system resources. SPE Book IV indicates that SPE
14 * allocation should follow a "serially reusable device" model,
15 * in which the SPE is assigned a task until it completes. When
16 * this is not possible, this sequence may be used to premptively
17 * save, and then later (optionally) restore the context of a
18 * program executing on an SPE.
21 #include <linux/export.h>
22 #include <linux/errno.h>
23 #include <linux/hardirq.h>
24 #include <linux/sched.h>
25 #include <linux/kernel.h>
27 #include <linux/vmalloc.h>
28 #include <linux/smp.h>
29 #include <linux/stddef.h>
30 #include <linux/unistd.h>
34 #include <asm/spu_priv1.h>
35 #include <asm/spu_csa.h>
36 #include <asm/mmu_context.h>
40 #include "spu_save_dump.h"
41 #include "spu_restore_dump.h"
44 #define POLL_WHILE_TRUE(_c) { \
49 #define RELAX_SPIN_COUNT 1000
50 #define POLL_WHILE_TRUE(_c) { \
53 for (_i=0; _i<RELAX_SPIN_COUNT && (_c); _i++) { \
56 if (unlikely(_c)) yield(); \
62 #define POLL_WHILE_FALSE(_c) POLL_WHILE_TRUE(!(_c))
64 static inline void acquire_spu_lock(struct spu *spu)
68 * Acquire SPU-specific mutual exclusion lock.
73 static inline void release_spu_lock(struct spu *spu)
76 * Release SPU-specific mutual exclusion lock.
81 static inline int check_spu_isolate(struct spu_state *csa, struct spu *spu)
83 struct spu_problem __iomem *prob = spu->problem;
88 * If SPU_Status[E,L,IS] any field is '1', this
89 * SPU is in isolate state and cannot be context
92 isolate_state = SPU_STATUS_ISOLATED_STATE |
93 SPU_STATUS_ISOLATED_LOAD_STATUS | SPU_STATUS_ISOLATED_EXIT_STATUS;
94 return (in_be32(&prob->spu_status_R) & isolate_state) ? 1 : 0;
97 static inline void disable_interrupts(struct spu_state *csa, struct spu *spu)
101 * Save INT_Mask_class0 in CSA.
102 * Write INT_MASK_class0 with value of 0.
103 * Save INT_Mask_class1 in CSA.
104 * Write INT_MASK_class1 with value of 0.
105 * Save INT_Mask_class2 in CSA.
106 * Write INT_MASK_class2 with value of 0.
107 * Synchronize all three interrupts to be sure
108 * we no longer execute a handler on another CPU.
110 spin_lock_irq(&spu->register_lock);
112 csa->priv1.int_mask_class0_RW = spu_int_mask_get(spu, 0);
113 csa->priv1.int_mask_class1_RW = spu_int_mask_get(spu, 1);
114 csa->priv1.int_mask_class2_RW = spu_int_mask_get(spu, 2);
116 spu_int_mask_set(spu, 0, 0ul);
117 spu_int_mask_set(spu, 1, 0ul);
118 spu_int_mask_set(spu, 2, 0ul);
120 spin_unlock_irq(&spu->register_lock);
123 * This flag needs to be set before calling synchronize_irq so
124 * that the update will be visible to the relevant handlers
127 set_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags);
128 clear_bit(SPU_CONTEXT_FAULT_PENDING, &spu->flags);
129 synchronize_irq(spu->irqs[0]);
130 synchronize_irq(spu->irqs[1]);
131 synchronize_irq(spu->irqs[2]);
134 static inline void set_watchdog_timer(struct spu_state *csa, struct spu *spu)
138 * Set a software watchdog timer, which specifies the
139 * maximum allowable time for a context save sequence.
141 * For present, this implementation will not set a global
142 * watchdog timer, as virtualization & variable system load
143 * may cause unpredictable execution times.
147 static inline void inhibit_user_access(struct spu_state *csa, struct spu *spu)
151 * Inhibit user-space access (if provided) to this
152 * SPU by unmapping the virtual pages assigned to
153 * the SPU memory-mapped I/O (MMIO) for problem
158 static inline void set_switch_pending(struct spu_state *csa, struct spu *spu)
162 * Set a software context switch pending flag.
163 * Done above in Step 3 - disable_interrupts().
167 static inline void save_mfc_cntl(struct spu_state *csa, struct spu *spu)
169 struct spu_priv2 __iomem *priv2 = spu->priv2;
172 * Suspend DMA and save MFC_CNTL.
174 switch (in_be64(&priv2->mfc_control_RW) &
175 MFC_CNTL_SUSPEND_DMA_STATUS_MASK) {
176 case MFC_CNTL_SUSPEND_IN_PROGRESS:
177 POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
178 MFC_CNTL_SUSPEND_DMA_STATUS_MASK) ==
179 MFC_CNTL_SUSPEND_COMPLETE);
181 case MFC_CNTL_SUSPEND_COMPLETE:
183 csa->priv2.mfc_control_RW =
184 in_be64(&priv2->mfc_control_RW) |
185 MFC_CNTL_SUSPEND_DMA_QUEUE;
187 case MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION:
188 out_be64(&priv2->mfc_control_RW, MFC_CNTL_SUSPEND_DMA_QUEUE);
189 POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
190 MFC_CNTL_SUSPEND_DMA_STATUS_MASK) ==
191 MFC_CNTL_SUSPEND_COMPLETE);
193 csa->priv2.mfc_control_RW =
194 in_be64(&priv2->mfc_control_RW) &
195 ~MFC_CNTL_SUSPEND_DMA_QUEUE &
196 ~MFC_CNTL_SUSPEND_MASK;
201 static inline void save_spu_runcntl(struct spu_state *csa, struct spu *spu)
203 struct spu_problem __iomem *prob = spu->problem;
206 * Save SPU_Runcntl in the CSA. This value contains
207 * the "Application Desired State".
209 csa->prob.spu_runcntl_RW = in_be32(&prob->spu_runcntl_RW);
212 static inline void save_mfc_sr1(struct spu_state *csa, struct spu *spu)
215 * Save MFC_SR1 in the CSA.
217 csa->priv1.mfc_sr1_RW = spu_mfc_sr1_get(spu);
220 static inline void save_spu_status(struct spu_state *csa, struct spu *spu)
222 struct spu_problem __iomem *prob = spu->problem;
225 * Read SPU_Status[R], and save to CSA.
227 if ((in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING) == 0) {
228 csa->prob.spu_status_R = in_be32(&prob->spu_status_R);
232 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
234 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
237 SPU_STATUS_INVALID_INSTR | SPU_STATUS_SINGLE_STEP |
238 SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP;
239 if ((in_be32(&prob->spu_status_R) & stopped) == 0)
240 csa->prob.spu_status_R = SPU_STATUS_RUNNING;
242 csa->prob.spu_status_R = in_be32(&prob->spu_status_R);
246 static inline void save_mfc_stopped_status(struct spu_state *csa,
249 struct spu_priv2 __iomem *priv2 = spu->priv2;
250 const u64 mask = MFC_CNTL_DECREMENTER_RUNNING |
251 MFC_CNTL_DMA_QUEUES_EMPTY;
254 * Read MFC_CNTL[Ds]. Update saved copy of
257 * update: do the same with MFC_CNTL[Q].
259 csa->priv2.mfc_control_RW &= ~mask;
260 csa->priv2.mfc_control_RW |= in_be64(&priv2->mfc_control_RW) & mask;
263 static inline void halt_mfc_decr(struct spu_state *csa, struct spu *spu)
265 struct spu_priv2 __iomem *priv2 = spu->priv2;
268 * Write MFC_CNTL[Dh] set to a '1' to halt
271 out_be64(&priv2->mfc_control_RW,
272 MFC_CNTL_DECREMENTER_HALTED | MFC_CNTL_SUSPEND_MASK);
276 static inline void save_timebase(struct spu_state *csa, struct spu *spu)
279 * Read PPE Timebase High and Timebase low registers
280 * and save in CSA. TBD.
282 csa->suspend_time = get_cycles();
285 static inline void remove_other_spu_access(struct spu_state *csa,
289 * Remove other SPU access to this SPU by unmapping
290 * this SPU's pages from their address space. TBD.
294 static inline void do_mfc_mssync(struct spu_state *csa, struct spu *spu)
296 struct spu_problem __iomem *prob = spu->problem;
300 * Write SPU_MSSync register. Poll SPU_MSSync[P]
303 out_be64(&prob->spc_mssync_RW, 1UL);
304 POLL_WHILE_TRUE(in_be64(&prob->spc_mssync_RW) & MS_SYNC_PENDING);
307 static inline void issue_mfc_tlbie(struct spu_state *csa, struct spu *spu)
312 * Write TLB_Invalidate_Entry[IS,VPN,L,Lp]=0 register.
313 * Then issue a PPE sync instruction.
315 spu_tlb_invalidate(spu);
319 static inline void handle_pending_interrupts(struct spu_state *csa,
323 * Handle any pending interrupts from this SPU
324 * here. This is OS or hypervisor specific. One
325 * option is to re-enable interrupts to handle any
326 * pending interrupts, with the interrupt handlers
327 * recognizing the software Context Switch Pending
328 * flag, to ensure the SPU execution or MFC command
329 * queue is not restarted. TBD.
333 static inline void save_mfc_queues(struct spu_state *csa, struct spu *spu)
335 struct spu_priv2 __iomem *priv2 = spu->priv2;
339 * If MFC_Cntl[Se]=0 then save
340 * MFC command queues.
342 if ((in_be64(&priv2->mfc_control_RW) & MFC_CNTL_DMA_QUEUES_EMPTY) == 0) {
343 for (i = 0; i < 8; i++) {
344 csa->priv2.puq[i].mfc_cq_data0_RW =
345 in_be64(&priv2->puq[i].mfc_cq_data0_RW);
346 csa->priv2.puq[i].mfc_cq_data1_RW =
347 in_be64(&priv2->puq[i].mfc_cq_data1_RW);
348 csa->priv2.puq[i].mfc_cq_data2_RW =
349 in_be64(&priv2->puq[i].mfc_cq_data2_RW);
350 csa->priv2.puq[i].mfc_cq_data3_RW =
351 in_be64(&priv2->puq[i].mfc_cq_data3_RW);
353 for (i = 0; i < 16; i++) {
354 csa->priv2.spuq[i].mfc_cq_data0_RW =
355 in_be64(&priv2->spuq[i].mfc_cq_data0_RW);
356 csa->priv2.spuq[i].mfc_cq_data1_RW =
357 in_be64(&priv2->spuq[i].mfc_cq_data1_RW);
358 csa->priv2.spuq[i].mfc_cq_data2_RW =
359 in_be64(&priv2->spuq[i].mfc_cq_data2_RW);
360 csa->priv2.spuq[i].mfc_cq_data3_RW =
361 in_be64(&priv2->spuq[i].mfc_cq_data3_RW);
366 static inline void save_ppu_querymask(struct spu_state *csa, struct spu *spu)
368 struct spu_problem __iomem *prob = spu->problem;
371 * Save the PPU_QueryMask register
374 csa->prob.dma_querymask_RW = in_be32(&prob->dma_querymask_RW);
377 static inline void save_ppu_querytype(struct spu_state *csa, struct spu *spu)
379 struct spu_problem __iomem *prob = spu->problem;
382 * Save the PPU_QueryType register
385 csa->prob.dma_querytype_RW = in_be32(&prob->dma_querytype_RW);
388 static inline void save_ppu_tagstatus(struct spu_state *csa, struct spu *spu)
390 struct spu_problem __iomem *prob = spu->problem;
392 /* Save the Prxy_TagStatus register in the CSA.
394 * It is unnecessary to restore dma_tagstatus_R, however,
395 * dma_tagstatus_R in the CSA is accessed via backing_ops, so
398 csa->prob.dma_tagstatus_R = in_be32(&prob->dma_tagstatus_R);
401 static inline void save_mfc_csr_tsq(struct spu_state *csa, struct spu *spu)
403 struct spu_priv2 __iomem *priv2 = spu->priv2;
406 * Save the MFC_CSR_TSQ register
409 csa->priv2.spu_tag_status_query_RW =
410 in_be64(&priv2->spu_tag_status_query_RW);
413 static inline void save_mfc_csr_cmd(struct spu_state *csa, struct spu *spu)
415 struct spu_priv2 __iomem *priv2 = spu->priv2;
418 * Save the MFC_CSR_CMD1 and MFC_CSR_CMD2
419 * registers in the CSA.
421 csa->priv2.spu_cmd_buf1_RW = in_be64(&priv2->spu_cmd_buf1_RW);
422 csa->priv2.spu_cmd_buf2_RW = in_be64(&priv2->spu_cmd_buf2_RW);
425 static inline void save_mfc_csr_ato(struct spu_state *csa, struct spu *spu)
427 struct spu_priv2 __iomem *priv2 = spu->priv2;
430 * Save the MFC_CSR_ATO register in
433 csa->priv2.spu_atomic_status_RW = in_be64(&priv2->spu_atomic_status_RW);
436 static inline void save_mfc_tclass_id(struct spu_state *csa, struct spu *spu)
439 * Save the MFC_TCLASS_ID register in
442 csa->priv1.mfc_tclass_id_RW = spu_mfc_tclass_id_get(spu);
445 static inline void set_mfc_tclass_id(struct spu_state *csa, struct spu *spu)
449 * Write the MFC_TCLASS_ID register with
450 * the value 0x10000000.
452 spu_mfc_tclass_id_set(spu, 0x10000000);
456 static inline void purge_mfc_queue(struct spu_state *csa, struct spu *spu)
458 struct spu_priv2 __iomem *priv2 = spu->priv2;
462 * Write MFC_CNTL[Pc]=1 (purge queue).
464 out_be64(&priv2->mfc_control_RW,
465 MFC_CNTL_PURGE_DMA_REQUEST |
466 MFC_CNTL_SUSPEND_MASK);
470 static inline void wait_purge_complete(struct spu_state *csa, struct spu *spu)
472 struct spu_priv2 __iomem *priv2 = spu->priv2;
475 * Poll MFC_CNTL[Ps] until value '11' is read
478 POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
479 MFC_CNTL_PURGE_DMA_STATUS_MASK) ==
480 MFC_CNTL_PURGE_DMA_COMPLETE);
483 static inline void setup_mfc_sr1(struct spu_state *csa, struct spu *spu)
487 * Write MFC_SR1 with MFC_SR1[D=0,S=1] and
488 * MFC_SR1[TL,R,Pr,T] set correctly for the
489 * OS specific environment.
491 * Implementation note: The SPU-side code
492 * for save/restore is privileged, so the
493 * MFC_SR1[Pr] bit is not set.
496 spu_mfc_sr1_set(spu, (MFC_STATE1_MASTER_RUN_CONTROL_MASK |
497 MFC_STATE1_RELOCATE_MASK |
498 MFC_STATE1_BUS_TLBIE_MASK));
501 static inline void save_spu_npc(struct spu_state *csa, struct spu *spu)
503 struct spu_problem __iomem *prob = spu->problem;
506 * Save SPU_NPC in the CSA.
508 csa->prob.spu_npc_RW = in_be32(&prob->spu_npc_RW);
511 static inline void save_spu_privcntl(struct spu_state *csa, struct spu *spu)
513 struct spu_priv2 __iomem *priv2 = spu->priv2;
516 * Save SPU_PrivCntl in the CSA.
518 csa->priv2.spu_privcntl_RW = in_be64(&priv2->spu_privcntl_RW);
521 static inline void reset_spu_privcntl(struct spu_state *csa, struct spu *spu)
523 struct spu_priv2 __iomem *priv2 = spu->priv2;
527 * Write SPU_PrivCntl[S,Le,A] fields reset to 0.
529 out_be64(&priv2->spu_privcntl_RW, 0UL);
533 static inline void save_spu_lslr(struct spu_state *csa, struct spu *spu)
535 struct spu_priv2 __iomem *priv2 = spu->priv2;
538 * Save SPU_LSLR in the CSA.
540 csa->priv2.spu_lslr_RW = in_be64(&priv2->spu_lslr_RW);
543 static inline void reset_spu_lslr(struct spu_state *csa, struct spu *spu)
545 struct spu_priv2 __iomem *priv2 = spu->priv2;
551 out_be64(&priv2->spu_lslr_RW, LS_ADDR_MASK);
555 static inline void save_spu_cfg(struct spu_state *csa, struct spu *spu)
557 struct spu_priv2 __iomem *priv2 = spu->priv2;
560 * Save SPU_Cfg in the CSA.
562 csa->priv2.spu_cfg_RW = in_be64(&priv2->spu_cfg_RW);
565 static inline void save_pm_trace(struct spu_state *csa, struct spu *spu)
568 * Save PM_Trace_Tag_Wait_Mask in the CSA.
569 * Not performed by this implementation.
573 static inline void save_mfc_rag(struct spu_state *csa, struct spu *spu)
576 * Save RA_GROUP_ID register and the
577 * RA_ENABLE reigster in the CSA.
579 csa->priv1.resource_allocation_groupID_RW =
580 spu_resource_allocation_groupID_get(spu);
581 csa->priv1.resource_allocation_enable_RW =
582 spu_resource_allocation_enable_get(spu);
585 static inline void save_ppu_mb_stat(struct spu_state *csa, struct spu *spu)
587 struct spu_problem __iomem *prob = spu->problem;
590 * Save MB_Stat register in the CSA.
592 csa->prob.mb_stat_R = in_be32(&prob->mb_stat_R);
595 static inline void save_ppu_mb(struct spu_state *csa, struct spu *spu)
597 struct spu_problem __iomem *prob = spu->problem;
600 * Save the PPU_MB register in the CSA.
602 csa->prob.pu_mb_R = in_be32(&prob->pu_mb_R);
605 static inline void save_ppuint_mb(struct spu_state *csa, struct spu *spu)
607 struct spu_priv2 __iomem *priv2 = spu->priv2;
610 * Save the PPUINT_MB register in the CSA.
612 csa->priv2.puint_mb_R = in_be64(&priv2->puint_mb_R);
615 static inline void save_ch_part1(struct spu_state *csa, struct spu *spu)
617 struct spu_priv2 __iomem *priv2 = spu->priv2;
618 u64 idx, ch_indices[] = { 0UL, 3UL, 4UL, 24UL, 25UL, 27UL };
624 /* Save CH 1, without channel count */
625 out_be64(&priv2->spu_chnlcntptr_RW, 1);
626 csa->spu_chnldata_RW[1] = in_be64(&priv2->spu_chnldata_RW);
628 /* Save the following CH: [0,3,4,24,25,27] */
629 for (i = 0; i < ARRAY_SIZE(ch_indices); i++) {
631 out_be64(&priv2->spu_chnlcntptr_RW, idx);
633 csa->spu_chnldata_RW[idx] = in_be64(&priv2->spu_chnldata_RW);
634 csa->spu_chnlcnt_RW[idx] = in_be64(&priv2->spu_chnlcnt_RW);
635 out_be64(&priv2->spu_chnldata_RW, 0UL);
636 out_be64(&priv2->spu_chnlcnt_RW, 0UL);
641 static inline void save_spu_mb(struct spu_state *csa, struct spu *spu)
643 struct spu_priv2 __iomem *priv2 = spu->priv2;
647 * Save SPU Read Mailbox Channel.
649 out_be64(&priv2->spu_chnlcntptr_RW, 29UL);
651 csa->spu_chnlcnt_RW[29] = in_be64(&priv2->spu_chnlcnt_RW);
652 for (i = 0; i < 4; i++) {
653 csa->spu_mailbox_data[i] = in_be64(&priv2->spu_chnldata_RW);
655 out_be64(&priv2->spu_chnlcnt_RW, 0UL);
659 static inline void save_mfc_cmd(struct spu_state *csa, struct spu *spu)
661 struct spu_priv2 __iomem *priv2 = spu->priv2;
664 * Save MFC_CMD Channel.
666 out_be64(&priv2->spu_chnlcntptr_RW, 21UL);
668 csa->spu_chnlcnt_RW[21] = in_be64(&priv2->spu_chnlcnt_RW);
672 static inline void reset_ch(struct spu_state *csa, struct spu *spu)
674 struct spu_priv2 __iomem *priv2 = spu->priv2;
675 u64 ch_indices[4] = { 21UL, 23UL, 28UL, 30UL };
676 u64 ch_counts[4] = { 16UL, 1UL, 1UL, 1UL };
681 * Reset the following CH: [21, 23, 28, 30]
683 for (i = 0; i < 4; i++) {
685 out_be64(&priv2->spu_chnlcntptr_RW, idx);
687 out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]);
692 static inline void resume_mfc_queue(struct spu_state *csa, struct spu *spu)
694 struct spu_priv2 __iomem *priv2 = spu->priv2;
698 * Write MFC_CNTL[Sc]=0 (resume queue processing).
700 out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESUME_DMA_QUEUE);
703 static inline void setup_mfc_slbs(struct spu_state *csa, struct spu *spu,
704 unsigned int *code, int code_size)
708 * If MFC_SR1[R]=1, write 0 to SLB_Invalidate_All
709 * register, then initialize SLB_VSID and SLB_ESID
710 * to provide access to SPU context save code and
713 * This implementation places both the context
714 * switch code and LSCSA in kernel address space.
716 * Further this implementation assumes that the
717 * MFC_SR1[R]=1 (in other words, assume that
718 * translation is desired by OS environment).
720 spu_invalidate_slbs(spu);
721 spu_setup_kernel_slbs(spu, csa->lscsa, code, code_size);
724 static inline void set_switch_active(struct spu_state *csa, struct spu *spu)
728 * Change the software context switch pending flag
729 * to context switch active. This implementation does
730 * not uses a switch active flag.
732 * Now that we have saved the mfc in the csa, we can add in the
733 * restart command if an exception occurred.
735 if (test_bit(SPU_CONTEXT_FAULT_PENDING, &spu->flags))
736 csa->priv2.mfc_control_RW |= MFC_CNTL_RESTART_DMA_COMMAND;
737 clear_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags);
741 static inline void enable_interrupts(struct spu_state *csa, struct spu *spu)
743 unsigned long class1_mask = CLASS1_ENABLE_SEGMENT_FAULT_INTR |
744 CLASS1_ENABLE_STORAGE_FAULT_INTR;
748 * Reset and then enable interrupts, as
751 * This implementation enables only class1
752 * (translation) interrupts.
754 spin_lock_irq(&spu->register_lock);
755 spu_int_stat_clear(spu, 0, CLASS0_INTR_MASK);
756 spu_int_stat_clear(spu, 1, CLASS1_INTR_MASK);
757 spu_int_stat_clear(spu, 2, CLASS2_INTR_MASK);
758 spu_int_mask_set(spu, 0, 0ul);
759 spu_int_mask_set(spu, 1, class1_mask);
760 spu_int_mask_set(spu, 2, 0ul);
761 spin_unlock_irq(&spu->register_lock);
764 static inline int send_mfc_dma(struct spu *spu, unsigned long ea,
765 unsigned int ls_offset, unsigned int size,
766 unsigned int tag, unsigned int rclass,
769 struct spu_problem __iomem *prob = spu->problem;
770 union mfc_tag_size_class_cmd command;
771 unsigned int transfer_size;
772 volatile unsigned int status = 0x0;
776 (size > MFC_MAX_DMA_SIZE) ? MFC_MAX_DMA_SIZE : size;
777 command.u.mfc_size = transfer_size;
778 command.u.mfc_tag = tag;
779 command.u.mfc_rclassid = rclass;
780 command.u.mfc_cmd = cmd;
782 out_be32(&prob->mfc_lsa_W, ls_offset);
783 out_be64(&prob->mfc_ea_W, ea);
784 out_be64(&prob->mfc_union_W.all64, command.all64);
786 in_be32(&prob->mfc_union_W.by32.mfc_class_cmd32);
787 if (unlikely(status & 0x2)) {
790 } while (status & 0x3);
791 size -= transfer_size;
793 ls_offset += transfer_size;
798 static inline void save_ls_16kb(struct spu_state *csa, struct spu *spu)
800 unsigned long addr = (unsigned long)&csa->lscsa->ls[0];
801 unsigned int ls_offset = 0x0;
802 unsigned int size = 16384;
803 unsigned int tag = 0;
804 unsigned int rclass = 0;
805 unsigned int cmd = MFC_PUT_CMD;
808 * Issue a DMA command to copy the first 16K bytes
809 * of local storage to the CSA.
811 send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
814 static inline void set_spu_npc(struct spu_state *csa, struct spu *spu)
816 struct spu_problem __iomem *prob = spu->problem;
820 * Write SPU_NPC[IE]=0 and SPU_NPC[LSA] to entry
821 * point address of context save code in local
824 * This implementation uses SPU-side save/restore
825 * programs with entry points at LSA of 0.
827 out_be32(&prob->spu_npc_RW, 0);
831 static inline void set_signot1(struct spu_state *csa, struct spu *spu)
833 struct spu_problem __iomem *prob = spu->problem;
841 * Write SPU_Sig_Notify_1 register with upper 32-bits
842 * of the CSA.LSCSA effective address.
844 addr64.ull = (u64) csa->lscsa;
845 out_be32(&prob->signal_notify1, addr64.ui[0]);
849 static inline void set_signot2(struct spu_state *csa, struct spu *spu)
851 struct spu_problem __iomem *prob = spu->problem;
859 * Write SPU_Sig_Notify_2 register with lower 32-bits
860 * of the CSA.LSCSA effective address.
862 addr64.ull = (u64) csa->lscsa;
863 out_be32(&prob->signal_notify2, addr64.ui[1]);
867 static inline void send_save_code(struct spu_state *csa, struct spu *spu)
869 unsigned long addr = (unsigned long)&spu_save_code[0];
870 unsigned int ls_offset = 0x0;
871 unsigned int size = sizeof(spu_save_code);
872 unsigned int tag = 0;
873 unsigned int rclass = 0;
874 unsigned int cmd = MFC_GETFS_CMD;
877 * Issue a DMA command to copy context save code
878 * to local storage and start SPU.
880 send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
883 static inline void set_ppu_querymask(struct spu_state *csa, struct spu *spu)
885 struct spu_problem __iomem *prob = spu->problem;
889 * Write PPU_QueryMask=1 (enable Tag Group 0)
890 * and issue eieio instruction.
892 out_be32(&prob->dma_querymask_RW, MFC_TAGID_TO_TAGMASK(0));
896 static inline void wait_tag_complete(struct spu_state *csa, struct spu *spu)
898 struct spu_problem __iomem *prob = spu->problem;
899 u32 mask = MFC_TAGID_TO_TAGMASK(0);
906 * Poll PPU_TagStatus[gn] until 01 (Tag group 0 complete)
907 * or write PPU_QueryType[TS]=01 and wait for Tag Group
908 * Complete Interrupt. Write INT_Stat_Class0 or
909 * INT_Stat_Class2 with value of 'handled'.
911 POLL_WHILE_FALSE(in_be32(&prob->dma_tagstatus_R) & mask);
913 local_irq_save(flags);
914 spu_int_stat_clear(spu, 0, CLASS0_INTR_MASK);
915 spu_int_stat_clear(spu, 2, CLASS2_INTR_MASK);
916 local_irq_restore(flags);
919 static inline void wait_spu_stopped(struct spu_state *csa, struct spu *spu)
921 struct spu_problem __iomem *prob = spu->problem;
926 * Poll until SPU_Status[R]=0 or wait for SPU Class 0
927 * or SPU Class 2 interrupt. Write INT_Stat_class0
928 * or INT_Stat_class2 with value of handled.
930 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING);
932 local_irq_save(flags);
933 spu_int_stat_clear(spu, 0, CLASS0_INTR_MASK);
934 spu_int_stat_clear(spu, 2, CLASS2_INTR_MASK);
935 local_irq_restore(flags);
938 static inline int check_save_status(struct spu_state *csa, struct spu *spu)
940 struct spu_problem __iomem *prob = spu->problem;
944 * If SPU_Status[P]=1 and SPU_Status[SC] = "success",
945 * context save succeeded, otherwise context save
948 complete = ((SPU_SAVE_COMPLETE << SPU_STOP_STATUS_SHIFT) |
949 SPU_STATUS_STOPPED_BY_STOP);
950 return (in_be32(&prob->spu_status_R) != complete) ? 1 : 0;
953 static inline void terminate_spu_app(struct spu_state *csa, struct spu *spu)
956 * If required, notify the "using application" that
957 * the SPU task has been terminated. TBD.
961 static inline void suspend_mfc_and_halt_decr(struct spu_state *csa,
964 struct spu_priv2 __iomem *priv2 = spu->priv2;
967 * Write MFC_Cntl[Dh,Sc,Sm]='1','1','0' to suspend
968 * the queue and halt the decrementer.
970 out_be64(&priv2->mfc_control_RW, MFC_CNTL_SUSPEND_DMA_QUEUE |
971 MFC_CNTL_DECREMENTER_HALTED);
975 static inline void wait_suspend_mfc_complete(struct spu_state *csa,
978 struct spu_priv2 __iomem *priv2 = spu->priv2;
982 * Poll MFC_CNTL[Ss] until 11 is returned.
984 POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
985 MFC_CNTL_SUSPEND_DMA_STATUS_MASK) ==
986 MFC_CNTL_SUSPEND_COMPLETE);
989 static inline int suspend_spe(struct spu_state *csa, struct spu *spu)
991 struct spu_problem __iomem *prob = spu->problem;
994 * If SPU_Status[R]=1, stop SPU execution
995 * and wait for stop to complete.
997 * Returns 1 if SPU_Status[R]=1 on entry.
1000 if (in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING) {
1001 if (in_be32(&prob->spu_status_R) &
1002 SPU_STATUS_ISOLATED_EXIT_STATUS) {
1003 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1004 SPU_STATUS_RUNNING);
1006 if ((in_be32(&prob->spu_status_R) &
1007 SPU_STATUS_ISOLATED_LOAD_STATUS)
1008 || (in_be32(&prob->spu_status_R) &
1009 SPU_STATUS_ISOLATED_STATE)) {
1010 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
1012 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1013 SPU_STATUS_RUNNING);
1014 out_be32(&prob->spu_runcntl_RW, 0x2);
1016 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1017 SPU_STATUS_RUNNING);
1019 if (in_be32(&prob->spu_status_R) &
1020 SPU_STATUS_WAITING_FOR_CHANNEL) {
1021 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
1023 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1024 SPU_STATUS_RUNNING);
1031 static inline void clear_spu_status(struct spu_state *csa, struct spu *spu)
1033 struct spu_problem __iomem *prob = spu->problem;
1035 /* Restore, Step 10:
1036 * If SPU_Status[R]=0 and SPU_Status[E,L,IS]=1,
1037 * release SPU from isolate state.
1039 if (!(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING)) {
1040 if (in_be32(&prob->spu_status_R) &
1041 SPU_STATUS_ISOLATED_EXIT_STATUS) {
1042 spu_mfc_sr1_set(spu,
1043 MFC_STATE1_MASTER_RUN_CONTROL_MASK);
1045 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
1047 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1048 SPU_STATUS_RUNNING);
1050 if ((in_be32(&prob->spu_status_R) &
1051 SPU_STATUS_ISOLATED_LOAD_STATUS)
1052 || (in_be32(&prob->spu_status_R) &
1053 SPU_STATUS_ISOLATED_STATE)) {
1054 spu_mfc_sr1_set(spu,
1055 MFC_STATE1_MASTER_RUN_CONTROL_MASK);
1057 out_be32(&prob->spu_runcntl_RW, 0x2);
1059 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1060 SPU_STATUS_RUNNING);
1065 static inline void reset_ch_part1(struct spu_state *csa, struct spu *spu)
1067 struct spu_priv2 __iomem *priv2 = spu->priv2;
1068 u64 ch_indices[] = { 0UL, 3UL, 4UL, 24UL, 25UL, 27UL };
1072 /* Restore, Step 20:
1076 out_be64(&priv2->spu_chnlcntptr_RW, 1);
1077 out_be64(&priv2->spu_chnldata_RW, 0UL);
1079 /* Reset the following CH: [0,3,4,24,25,27] */
1080 for (i = 0; i < ARRAY_SIZE(ch_indices); i++) {
1081 idx = ch_indices[i];
1082 out_be64(&priv2->spu_chnlcntptr_RW, idx);
1084 out_be64(&priv2->spu_chnldata_RW, 0UL);
1085 out_be64(&priv2->spu_chnlcnt_RW, 0UL);
1090 static inline void reset_ch_part2(struct spu_state *csa, struct spu *spu)
1092 struct spu_priv2 __iomem *priv2 = spu->priv2;
1093 u64 ch_indices[5] = { 21UL, 23UL, 28UL, 29UL, 30UL };
1094 u64 ch_counts[5] = { 16UL, 1UL, 1UL, 0UL, 1UL };
1098 /* Restore, Step 21:
1099 * Reset the following CH: [21, 23, 28, 29, 30]
1101 for (i = 0; i < 5; i++) {
1102 idx = ch_indices[i];
1103 out_be64(&priv2->spu_chnlcntptr_RW, idx);
1105 out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]);
1110 static inline void setup_spu_status_part1(struct spu_state *csa,
1113 u32 status_P = SPU_STATUS_STOPPED_BY_STOP;
1114 u32 status_I = SPU_STATUS_INVALID_INSTR;
1115 u32 status_H = SPU_STATUS_STOPPED_BY_HALT;
1116 u32 status_S = SPU_STATUS_SINGLE_STEP;
1117 u32 status_S_I = SPU_STATUS_SINGLE_STEP | SPU_STATUS_INVALID_INSTR;
1118 u32 status_S_P = SPU_STATUS_SINGLE_STEP | SPU_STATUS_STOPPED_BY_STOP;
1119 u32 status_P_H = SPU_STATUS_STOPPED_BY_HALT |SPU_STATUS_STOPPED_BY_STOP;
1120 u32 status_P_I = SPU_STATUS_STOPPED_BY_STOP |SPU_STATUS_INVALID_INSTR;
1123 /* Restore, Step 27:
1124 * If the CSA.SPU_Status[I,S,H,P]=1 then add the correct
1125 * instruction sequence to the end of the SPU based restore
1126 * code (after the "context restored" stop and signal) to
1127 * restore the correct SPU status.
1129 * NOTE: Rather than modifying the SPU executable, we
1130 * instead add a new 'stopped_status' field to the
1131 * LSCSA. The SPU-side restore reads this field and
1132 * takes the appropriate action when exiting.
1136 (csa->prob.spu_status_R >> SPU_STOP_STATUS_SHIFT) & 0xFFFF;
1137 if ((csa->prob.spu_status_R & status_P_I) == status_P_I) {
1139 /* SPU_Status[P,I]=1 - Illegal Instruction followed
1140 * by Stop and Signal instruction, followed by 'br -4'.
1143 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P_I;
1144 csa->lscsa->stopped_status.slot[1] = status_code;
1146 } else if ((csa->prob.spu_status_R & status_P_H) == status_P_H) {
1148 /* SPU_Status[P,H]=1 - Halt Conditional, followed
1149 * by Stop and Signal instruction, followed by
1152 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P_H;
1153 csa->lscsa->stopped_status.slot[1] = status_code;
1155 } else if ((csa->prob.spu_status_R & status_S_P) == status_S_P) {
1157 /* SPU_Status[S,P]=1 - Stop and Signal instruction
1158 * followed by 'br -4'.
1160 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S_P;
1161 csa->lscsa->stopped_status.slot[1] = status_code;
1163 } else if ((csa->prob.spu_status_R & status_S_I) == status_S_I) {
1165 /* SPU_Status[S,I]=1 - Illegal instruction followed
1168 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S_I;
1169 csa->lscsa->stopped_status.slot[1] = status_code;
1171 } else if ((csa->prob.spu_status_R & status_P) == status_P) {
1173 /* SPU_Status[P]=1 - Stop and Signal instruction
1174 * followed by 'br -4'.
1176 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P;
1177 csa->lscsa->stopped_status.slot[1] = status_code;
1179 } else if ((csa->prob.spu_status_R & status_H) == status_H) {
1181 /* SPU_Status[H]=1 - Halt Conditional, followed
1184 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_H;
1186 } else if ((csa->prob.spu_status_R & status_S) == status_S) {
1188 /* SPU_Status[S]=1 - Two nop instructions.
1190 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S;
1192 } else if ((csa->prob.spu_status_R & status_I) == status_I) {
1194 /* SPU_Status[I]=1 - Illegal instruction followed
1197 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_I;
1202 static inline void setup_spu_status_part2(struct spu_state *csa,
1207 /* Restore, Step 28:
1208 * If the CSA.SPU_Status[I,S,H,P,R]=0 then
1209 * add a 'br *' instruction to the end of
1210 * the SPU based restore code.
1212 * NOTE: Rather than modifying the SPU executable, we
1213 * instead add a new 'stopped_status' field to the
1214 * LSCSA. The SPU-side restore reads this field and
1215 * takes the appropriate action when exiting.
1217 mask = SPU_STATUS_INVALID_INSTR |
1218 SPU_STATUS_SINGLE_STEP |
1219 SPU_STATUS_STOPPED_BY_HALT |
1220 SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_RUNNING;
1221 if (!(csa->prob.spu_status_R & mask)) {
1222 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_R;
1226 static inline void restore_mfc_rag(struct spu_state *csa, struct spu *spu)
1228 /* Restore, Step 29:
1229 * Restore RA_GROUP_ID register and the
1230 * RA_ENABLE reigster from the CSA.
1232 spu_resource_allocation_groupID_set(spu,
1233 csa->priv1.resource_allocation_groupID_RW);
1234 spu_resource_allocation_enable_set(spu,
1235 csa->priv1.resource_allocation_enable_RW);
1238 static inline void send_restore_code(struct spu_state *csa, struct spu *spu)
1240 unsigned long addr = (unsigned long)&spu_restore_code[0];
1241 unsigned int ls_offset = 0x0;
1242 unsigned int size = sizeof(spu_restore_code);
1243 unsigned int tag = 0;
1244 unsigned int rclass = 0;
1245 unsigned int cmd = MFC_GETFS_CMD;
1247 /* Restore, Step 37:
1248 * Issue MFC DMA command to copy context
1249 * restore code to local storage.
1251 send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
1254 static inline void setup_decr(struct spu_state *csa, struct spu *spu)
1256 /* Restore, Step 34:
1257 * If CSA.MFC_CNTL[Ds]=1 (decrementer was
1258 * running) then adjust decrementer, set
1259 * decrementer running status in LSCSA,
1260 * and set decrementer "wrapped" status
1263 if (csa->priv2.mfc_control_RW & MFC_CNTL_DECREMENTER_RUNNING) {
1264 cycles_t resume_time = get_cycles();
1265 cycles_t delta_time = resume_time - csa->suspend_time;
1267 csa->lscsa->decr_status.slot[0] = SPU_DECR_STATUS_RUNNING;
1268 if (csa->lscsa->decr.slot[0] < delta_time) {
1269 csa->lscsa->decr_status.slot[0] |=
1270 SPU_DECR_STATUS_WRAPPED;
1273 csa->lscsa->decr.slot[0] -= delta_time;
1275 csa->lscsa->decr_status.slot[0] = 0;
1279 static inline void setup_ppu_mb(struct spu_state *csa, struct spu *spu)
1281 /* Restore, Step 35:
1282 * Copy the CSA.PU_MB data into the LSCSA.
1284 csa->lscsa->ppu_mb.slot[0] = csa->prob.pu_mb_R;
1287 static inline void setup_ppuint_mb(struct spu_state *csa, struct spu *spu)
1289 /* Restore, Step 36:
1290 * Copy the CSA.PUINT_MB data into the LSCSA.
1292 csa->lscsa->ppuint_mb.slot[0] = csa->priv2.puint_mb_R;
1295 static inline int check_restore_status(struct spu_state *csa, struct spu *spu)
1297 struct spu_problem __iomem *prob = spu->problem;
1300 /* Restore, Step 40:
1301 * If SPU_Status[P]=1 and SPU_Status[SC] = "success",
1302 * context restore succeeded, otherwise context restore
1305 complete = ((SPU_RESTORE_COMPLETE << SPU_STOP_STATUS_SHIFT) |
1306 SPU_STATUS_STOPPED_BY_STOP);
1307 return (in_be32(&prob->spu_status_R) != complete) ? 1 : 0;
1310 static inline void restore_spu_privcntl(struct spu_state *csa, struct spu *spu)
1312 struct spu_priv2 __iomem *priv2 = spu->priv2;
1314 /* Restore, Step 41:
1315 * Restore SPU_PrivCntl from the CSA.
1317 out_be64(&priv2->spu_privcntl_RW, csa->priv2.spu_privcntl_RW);
1321 static inline void restore_status_part1(struct spu_state *csa, struct spu *spu)
1323 struct spu_problem __iomem *prob = spu->problem;
1326 /* Restore, Step 42:
1327 * If any CSA.SPU_Status[I,S,H,P]=1, then
1328 * restore the error or single step state.
1330 mask = SPU_STATUS_INVALID_INSTR |
1331 SPU_STATUS_SINGLE_STEP |
1332 SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP;
1333 if (csa->prob.spu_status_R & mask) {
1334 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
1336 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1337 SPU_STATUS_RUNNING);
1341 static inline void restore_status_part2(struct spu_state *csa, struct spu *spu)
1343 struct spu_problem __iomem *prob = spu->problem;
1346 /* Restore, Step 43:
1347 * If all CSA.SPU_Status[I,S,H,P,R]=0 then write
1348 * SPU_RunCntl[R0R1]='01', wait for SPU_Status[R]=1,
1349 * then write '00' to SPU_RunCntl[R0R1] and wait
1350 * for SPU_Status[R]=0.
1352 mask = SPU_STATUS_INVALID_INSTR |
1353 SPU_STATUS_SINGLE_STEP |
1354 SPU_STATUS_STOPPED_BY_HALT |
1355 SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_RUNNING;
1356 if (!(csa->prob.spu_status_R & mask)) {
1357 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
1359 POLL_WHILE_FALSE(in_be32(&prob->spu_status_R) &
1360 SPU_STATUS_RUNNING);
1361 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
1363 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1364 SPU_STATUS_RUNNING);
1368 static inline void restore_ls_16kb(struct spu_state *csa, struct spu *spu)
1370 unsigned long addr = (unsigned long)&csa->lscsa->ls[0];
1371 unsigned int ls_offset = 0x0;
1372 unsigned int size = 16384;
1373 unsigned int tag = 0;
1374 unsigned int rclass = 0;
1375 unsigned int cmd = MFC_GET_CMD;
1377 /* Restore, Step 44:
1378 * Issue a DMA command to restore the first
1379 * 16kb of local storage from CSA.
1381 send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
1384 static inline void suspend_mfc(struct spu_state *csa, struct spu *spu)
1386 struct spu_priv2 __iomem *priv2 = spu->priv2;
1388 /* Restore, Step 47.
1389 * Write MFC_Cntl[Sc,Sm]='1','0' to suspend
1392 out_be64(&priv2->mfc_control_RW, MFC_CNTL_SUSPEND_DMA_QUEUE);
1396 static inline void clear_interrupts(struct spu_state *csa, struct spu *spu)
1398 /* Restore, Step 49:
1399 * Write INT_MASK_class0 with value of 0.
1400 * Write INT_MASK_class1 with value of 0.
1401 * Write INT_MASK_class2 with value of 0.
1402 * Write INT_STAT_class0 with value of -1.
1403 * Write INT_STAT_class1 with value of -1.
1404 * Write INT_STAT_class2 with value of -1.
1406 spin_lock_irq(&spu->register_lock);
1407 spu_int_mask_set(spu, 0, 0ul);
1408 spu_int_mask_set(spu, 1, 0ul);
1409 spu_int_mask_set(spu, 2, 0ul);
1410 spu_int_stat_clear(spu, 0, CLASS0_INTR_MASK);
1411 spu_int_stat_clear(spu, 1, CLASS1_INTR_MASK);
1412 spu_int_stat_clear(spu, 2, CLASS2_INTR_MASK);
1413 spin_unlock_irq(&spu->register_lock);
1416 static inline void restore_mfc_queues(struct spu_state *csa, struct spu *spu)
1418 struct spu_priv2 __iomem *priv2 = spu->priv2;
1421 /* Restore, Step 50:
1422 * If MFC_Cntl[Se]!=0 then restore
1423 * MFC command queues.
1425 if ((csa->priv2.mfc_control_RW & MFC_CNTL_DMA_QUEUES_EMPTY_MASK) == 0) {
1426 for (i = 0; i < 8; i++) {
1427 out_be64(&priv2->puq[i].mfc_cq_data0_RW,
1428 csa->priv2.puq[i].mfc_cq_data0_RW);
1429 out_be64(&priv2->puq[i].mfc_cq_data1_RW,
1430 csa->priv2.puq[i].mfc_cq_data1_RW);
1431 out_be64(&priv2->puq[i].mfc_cq_data2_RW,
1432 csa->priv2.puq[i].mfc_cq_data2_RW);
1433 out_be64(&priv2->puq[i].mfc_cq_data3_RW,
1434 csa->priv2.puq[i].mfc_cq_data3_RW);
1436 for (i = 0; i < 16; i++) {
1437 out_be64(&priv2->spuq[i].mfc_cq_data0_RW,
1438 csa->priv2.spuq[i].mfc_cq_data0_RW);
1439 out_be64(&priv2->spuq[i].mfc_cq_data1_RW,
1440 csa->priv2.spuq[i].mfc_cq_data1_RW);
1441 out_be64(&priv2->spuq[i].mfc_cq_data2_RW,
1442 csa->priv2.spuq[i].mfc_cq_data2_RW);
1443 out_be64(&priv2->spuq[i].mfc_cq_data3_RW,
1444 csa->priv2.spuq[i].mfc_cq_data3_RW);
1450 static inline void restore_ppu_querymask(struct spu_state *csa, struct spu *spu)
1452 struct spu_problem __iomem *prob = spu->problem;
1454 /* Restore, Step 51:
1455 * Restore the PPU_QueryMask register from CSA.
1457 out_be32(&prob->dma_querymask_RW, csa->prob.dma_querymask_RW);
1461 static inline void restore_ppu_querytype(struct spu_state *csa, struct spu *spu)
1463 struct spu_problem __iomem *prob = spu->problem;
1465 /* Restore, Step 52:
1466 * Restore the PPU_QueryType register from CSA.
1468 out_be32(&prob->dma_querytype_RW, csa->prob.dma_querytype_RW);
1472 static inline void restore_mfc_csr_tsq(struct spu_state *csa, struct spu *spu)
1474 struct spu_priv2 __iomem *priv2 = spu->priv2;
1476 /* Restore, Step 53:
1477 * Restore the MFC_CSR_TSQ register from CSA.
1479 out_be64(&priv2->spu_tag_status_query_RW,
1480 csa->priv2.spu_tag_status_query_RW);
1484 static inline void restore_mfc_csr_cmd(struct spu_state *csa, struct spu *spu)
1486 struct spu_priv2 __iomem *priv2 = spu->priv2;
1488 /* Restore, Step 54:
1489 * Restore the MFC_CSR_CMD1 and MFC_CSR_CMD2
1490 * registers from CSA.
1492 out_be64(&priv2->spu_cmd_buf1_RW, csa->priv2.spu_cmd_buf1_RW);
1493 out_be64(&priv2->spu_cmd_buf2_RW, csa->priv2.spu_cmd_buf2_RW);
1497 static inline void restore_mfc_csr_ato(struct spu_state *csa, struct spu *spu)
1499 struct spu_priv2 __iomem *priv2 = spu->priv2;
1501 /* Restore, Step 55:
1502 * Restore the MFC_CSR_ATO register from CSA.
1504 out_be64(&priv2->spu_atomic_status_RW, csa->priv2.spu_atomic_status_RW);
1507 static inline void restore_mfc_tclass_id(struct spu_state *csa, struct spu *spu)
1509 /* Restore, Step 56:
1510 * Restore the MFC_TCLASS_ID register from CSA.
1512 spu_mfc_tclass_id_set(spu, csa->priv1.mfc_tclass_id_RW);
1516 static inline void set_llr_event(struct spu_state *csa, struct spu *spu)
1518 u64 ch0_cnt, ch0_data;
1521 /* Restore, Step 57:
1522 * Set the Lock Line Reservation Lost Event by:
1523 * 1. OR CSA.SPU_Event_Status with bit 21 (Lr) set to 1.
1524 * 2. If CSA.SPU_Channel_0_Count=0 and
1525 * CSA.SPU_Wr_Event_Mask[Lr]=1 and
1526 * CSA.SPU_Event_Status[Lr]=0 then set
1527 * CSA.SPU_Event_Status_Count=1.
1529 ch0_cnt = csa->spu_chnlcnt_RW[0];
1530 ch0_data = csa->spu_chnldata_RW[0];
1531 ch1_data = csa->spu_chnldata_RW[1];
1532 csa->spu_chnldata_RW[0] |= MFC_LLR_LOST_EVENT;
1533 if ((ch0_cnt == 0) && !(ch0_data & MFC_LLR_LOST_EVENT) &&
1534 (ch1_data & MFC_LLR_LOST_EVENT)) {
1535 csa->spu_chnlcnt_RW[0] = 1;
1539 static inline void restore_decr_wrapped(struct spu_state *csa, struct spu *spu)
1541 /* Restore, Step 58:
1542 * If the status of the CSA software decrementer
1543 * "wrapped" flag is set, OR in a '1' to
1544 * CSA.SPU_Event_Status[Tm].
1546 if (!(csa->lscsa->decr_status.slot[0] & SPU_DECR_STATUS_WRAPPED))
1549 if ((csa->spu_chnlcnt_RW[0] == 0) &&
1550 (csa->spu_chnldata_RW[1] & 0x20) &&
1551 !(csa->spu_chnldata_RW[0] & 0x20))
1552 csa->spu_chnlcnt_RW[0] = 1;
1554 csa->spu_chnldata_RW[0] |= 0x20;
1557 static inline void restore_ch_part1(struct spu_state *csa, struct spu *spu)
1559 struct spu_priv2 __iomem *priv2 = spu->priv2;
1560 u64 idx, ch_indices[] = { 0UL, 3UL, 4UL, 24UL, 25UL, 27UL };
1563 /* Restore, Step 59:
1564 * Restore the following CH: [0,3,4,24,25,27]
1566 for (i = 0; i < ARRAY_SIZE(ch_indices); i++) {
1567 idx = ch_indices[i];
1568 out_be64(&priv2->spu_chnlcntptr_RW, idx);
1570 out_be64(&priv2->spu_chnldata_RW, csa->spu_chnldata_RW[idx]);
1571 out_be64(&priv2->spu_chnlcnt_RW, csa->spu_chnlcnt_RW[idx]);
1576 static inline void restore_ch_part2(struct spu_state *csa, struct spu *spu)
1578 struct spu_priv2 __iomem *priv2 = spu->priv2;
1579 u64 ch_indices[3] = { 9UL, 21UL, 23UL };
1580 u64 ch_counts[3] = { 1UL, 16UL, 1UL };
1584 /* Restore, Step 60:
1585 * Restore the following CH: [9,21,23].
1588 ch_counts[1] = csa->spu_chnlcnt_RW[21];
1590 for (i = 0; i < 3; i++) {
1591 idx = ch_indices[i];
1592 out_be64(&priv2->spu_chnlcntptr_RW, idx);
1594 out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]);
1599 static inline void restore_spu_lslr(struct spu_state *csa, struct spu *spu)
1601 struct spu_priv2 __iomem *priv2 = spu->priv2;
1603 /* Restore, Step 61:
1604 * Restore the SPU_LSLR register from CSA.
1606 out_be64(&priv2->spu_lslr_RW, csa->priv2.spu_lslr_RW);
1610 static inline void restore_spu_cfg(struct spu_state *csa, struct spu *spu)
1612 struct spu_priv2 __iomem *priv2 = spu->priv2;
1614 /* Restore, Step 62:
1615 * Restore the SPU_Cfg register from CSA.
1617 out_be64(&priv2->spu_cfg_RW, csa->priv2.spu_cfg_RW);
1621 static inline void restore_pm_trace(struct spu_state *csa, struct spu *spu)
1623 /* Restore, Step 63:
1624 * Restore PM_Trace_Tag_Wait_Mask from CSA.
1625 * Not performed by this implementation.
1629 static inline void restore_spu_npc(struct spu_state *csa, struct spu *spu)
1631 struct spu_problem __iomem *prob = spu->problem;
1633 /* Restore, Step 64:
1634 * Restore SPU_NPC from CSA.
1636 out_be32(&prob->spu_npc_RW, csa->prob.spu_npc_RW);
1640 static inline void restore_spu_mb(struct spu_state *csa, struct spu *spu)
1642 struct spu_priv2 __iomem *priv2 = spu->priv2;
1645 /* Restore, Step 65:
1646 * Restore MFC_RdSPU_MB from CSA.
1648 out_be64(&priv2->spu_chnlcntptr_RW, 29UL);
1650 out_be64(&priv2->spu_chnlcnt_RW, csa->spu_chnlcnt_RW[29]);
1651 for (i = 0; i < 4; i++) {
1652 out_be64(&priv2->spu_chnldata_RW, csa->spu_mailbox_data[i]);
1657 static inline void check_ppu_mb_stat(struct spu_state *csa, struct spu *spu)
1659 struct spu_problem __iomem *prob = spu->problem;
1662 /* Restore, Step 66:
1663 * If CSA.MB_Stat[P]=0 (mailbox empty) then
1664 * read from the PPU_MB register.
1666 if ((csa->prob.mb_stat_R & 0xFF) == 0) {
1667 dummy = in_be32(&prob->pu_mb_R);
1672 static inline void check_ppuint_mb_stat(struct spu_state *csa, struct spu *spu)
1674 struct spu_priv2 __iomem *priv2 = spu->priv2;
1677 /* Restore, Step 66:
1678 * If CSA.MB_Stat[I]=0 (mailbox empty) then
1679 * read from the PPUINT_MB register.
1681 if ((csa->prob.mb_stat_R & 0xFF0000) == 0) {
1682 dummy = in_be64(&priv2->puint_mb_R);
1684 spu_int_stat_clear(spu, 2, CLASS2_ENABLE_MAILBOX_INTR);
1689 static inline void restore_mfc_sr1(struct spu_state *csa, struct spu *spu)
1691 /* Restore, Step 69:
1692 * Restore the MFC_SR1 register from CSA.
1694 spu_mfc_sr1_set(spu, csa->priv1.mfc_sr1_RW);
1698 static inline void set_int_route(struct spu_state *csa, struct spu *spu)
1700 struct spu_context *ctx = spu->ctx;
1702 spu_cpu_affinity_set(spu, ctx->last_ran);
1705 static inline void restore_other_spu_access(struct spu_state *csa,
1708 /* Restore, Step 70:
1709 * Restore other SPU mappings to this SPU. TBD.
1713 static inline void restore_spu_runcntl(struct spu_state *csa, struct spu *spu)
1715 struct spu_problem __iomem *prob = spu->problem;
1717 /* Restore, Step 71:
1718 * If CSA.SPU_Status[R]=1 then write
1719 * SPU_RunCntl[R0R1]='01'.
1721 if (csa->prob.spu_status_R & SPU_STATUS_RUNNING) {
1722 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
1727 static inline void restore_mfc_cntl(struct spu_state *csa, struct spu *spu)
1729 struct spu_priv2 __iomem *priv2 = spu->priv2;
1731 /* Restore, Step 72:
1732 * Restore the MFC_CNTL register for the CSA.
1734 out_be64(&priv2->mfc_control_RW, csa->priv2.mfc_control_RW);
1738 * The queue is put back into the same state that was evident prior to
1739 * the context switch. The suspend flag is added to the saved state in
1740 * the csa, if the operational state was suspending or suspended. In
1741 * this case, the code that suspended the mfc is responsible for
1742 * continuing it. Note that SPE faults do not change the operational
1747 static inline void enable_user_access(struct spu_state *csa, struct spu *spu)
1749 /* Restore, Step 73:
1750 * Enable user-space access (if provided) to this
1751 * SPU by mapping the virtual pages assigned to
1752 * the SPU memory-mapped I/O (MMIO) for problem
1757 static inline void reset_switch_active(struct spu_state *csa, struct spu *spu)
1759 /* Restore, Step 74:
1760 * Reset the "context switch active" flag.
1761 * Not performed by this implementation.
1765 static inline void reenable_interrupts(struct spu_state *csa, struct spu *spu)
1767 /* Restore, Step 75:
1768 * Re-enable SPU interrupts.
1770 spin_lock_irq(&spu->register_lock);
1771 spu_int_mask_set(spu, 0, csa->priv1.int_mask_class0_RW);
1772 spu_int_mask_set(spu, 1, csa->priv1.int_mask_class1_RW);
1773 spu_int_mask_set(spu, 2, csa->priv1.int_mask_class2_RW);
1774 spin_unlock_irq(&spu->register_lock);
1777 static int quiece_spu(struct spu_state *prev, struct spu *spu)
1780 * Combined steps 2-18 of SPU context save sequence, which
1781 * quiesce the SPU state (disable SPU execution, MFC command
1782 * queues, decrementer, SPU interrupts, etc.).
1784 * Returns 0 on success.
1785 * 2 if failed step 2.
1786 * 6 if failed step 6.
1789 if (check_spu_isolate(prev, spu)) { /* Step 2. */
1792 disable_interrupts(prev, spu); /* Step 3. */
1793 set_watchdog_timer(prev, spu); /* Step 4. */
1794 inhibit_user_access(prev, spu); /* Step 5. */
1795 if (check_spu_isolate(prev, spu)) { /* Step 6. */
1798 set_switch_pending(prev, spu); /* Step 7. */
1799 save_mfc_cntl(prev, spu); /* Step 8. */
1800 save_spu_runcntl(prev, spu); /* Step 9. */
1801 save_mfc_sr1(prev, spu); /* Step 10. */
1802 save_spu_status(prev, spu); /* Step 11. */
1803 save_mfc_stopped_status(prev, spu); /* Step 12. */
1804 halt_mfc_decr(prev, spu); /* Step 13. */
1805 save_timebase(prev, spu); /* Step 14. */
1806 remove_other_spu_access(prev, spu); /* Step 15. */
1807 do_mfc_mssync(prev, spu); /* Step 16. */
1808 issue_mfc_tlbie(prev, spu); /* Step 17. */
1809 handle_pending_interrupts(prev, spu); /* Step 18. */
1814 static void save_csa(struct spu_state *prev, struct spu *spu)
1817 * Combine steps 19-44 of SPU context save sequence, which
1818 * save regions of the privileged & problem state areas.
1821 save_mfc_queues(prev, spu); /* Step 19. */
1822 save_ppu_querymask(prev, spu); /* Step 20. */
1823 save_ppu_querytype(prev, spu); /* Step 21. */
1824 save_ppu_tagstatus(prev, spu); /* NEW. */
1825 save_mfc_csr_tsq(prev, spu); /* Step 22. */
1826 save_mfc_csr_cmd(prev, spu); /* Step 23. */
1827 save_mfc_csr_ato(prev, spu); /* Step 24. */
1828 save_mfc_tclass_id(prev, spu); /* Step 25. */
1829 set_mfc_tclass_id(prev, spu); /* Step 26. */
1830 save_mfc_cmd(prev, spu); /* Step 26a - moved from 44. */
1831 purge_mfc_queue(prev, spu); /* Step 27. */
1832 wait_purge_complete(prev, spu); /* Step 28. */
1833 setup_mfc_sr1(prev, spu); /* Step 30. */
1834 save_spu_npc(prev, spu); /* Step 31. */
1835 save_spu_privcntl(prev, spu); /* Step 32. */
1836 reset_spu_privcntl(prev, spu); /* Step 33. */
1837 save_spu_lslr(prev, spu); /* Step 34. */
1838 reset_spu_lslr(prev, spu); /* Step 35. */
1839 save_spu_cfg(prev, spu); /* Step 36. */
1840 save_pm_trace(prev, spu); /* Step 37. */
1841 save_mfc_rag(prev, spu); /* Step 38. */
1842 save_ppu_mb_stat(prev, spu); /* Step 39. */
1843 save_ppu_mb(prev, spu); /* Step 40. */
1844 save_ppuint_mb(prev, spu); /* Step 41. */
1845 save_ch_part1(prev, spu); /* Step 42. */
1846 save_spu_mb(prev, spu); /* Step 43. */
1847 reset_ch(prev, spu); /* Step 45. */
1850 static void save_lscsa(struct spu_state *prev, struct spu *spu)
1853 * Perform steps 46-57 of SPU context save sequence,
1854 * which save regions of the local store and register
1858 resume_mfc_queue(prev, spu); /* Step 46. */
1860 setup_mfc_slbs(prev, spu, spu_save_code, sizeof(spu_save_code));
1861 set_switch_active(prev, spu); /* Step 48. */
1862 enable_interrupts(prev, spu); /* Step 49. */
1863 save_ls_16kb(prev, spu); /* Step 50. */
1864 set_spu_npc(prev, spu); /* Step 51. */
1865 set_signot1(prev, spu); /* Step 52. */
1866 set_signot2(prev, spu); /* Step 53. */
1867 send_save_code(prev, spu); /* Step 54. */
1868 set_ppu_querymask(prev, spu); /* Step 55. */
1869 wait_tag_complete(prev, spu); /* Step 56. */
1870 wait_spu_stopped(prev, spu); /* Step 57. */
1873 static void force_spu_isolate_exit(struct spu *spu)
1875 struct spu_problem __iomem *prob = spu->problem;
1876 struct spu_priv2 __iomem *priv2 = spu->priv2;
1878 /* Stop SPE execution and wait for completion. */
1879 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
1881 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING);
1883 /* Restart SPE master runcntl. */
1884 spu_mfc_sr1_set(spu, MFC_STATE1_MASTER_RUN_CONTROL_MASK);
1887 /* Initiate isolate exit request and wait for completion. */
1888 out_be64(&priv2->spu_privcntl_RW, 4LL);
1890 out_be32(&prob->spu_runcntl_RW, 2);
1892 POLL_WHILE_FALSE((in_be32(&prob->spu_status_R)
1893 & SPU_STATUS_STOPPED_BY_STOP));
1895 /* Reset load request to normal. */
1896 out_be64(&priv2->spu_privcntl_RW, SPU_PRIVCNT_LOAD_REQUEST_NORMAL);
1902 * Check SPU run-control state and force isolated
1903 * exit function as necessary.
1905 static void stop_spu_isolate(struct spu *spu)
1907 struct spu_problem __iomem *prob = spu->problem;
1909 if (in_be32(&prob->spu_status_R) & SPU_STATUS_ISOLATED_STATE) {
1910 /* The SPU is in isolated state; the only way
1911 * to get it out is to perform an isolated
1912 * exit (clean) operation.
1914 force_spu_isolate_exit(spu);
1918 static void harvest(struct spu_state *prev, struct spu *spu)
1921 * Perform steps 2-25 of SPU context restore sequence,
1922 * which resets an SPU either after a failed save, or
1923 * when using SPU for first time.
1926 disable_interrupts(prev, spu); /* Step 2. */
1927 inhibit_user_access(prev, spu); /* Step 3. */
1928 terminate_spu_app(prev, spu); /* Step 4. */
1929 set_switch_pending(prev, spu); /* Step 5. */
1930 stop_spu_isolate(spu); /* NEW. */
1931 remove_other_spu_access(prev, spu); /* Step 6. */
1932 suspend_mfc_and_halt_decr(prev, spu); /* Step 7. */
1933 wait_suspend_mfc_complete(prev, spu); /* Step 8. */
1934 if (!suspend_spe(prev, spu)) /* Step 9. */
1935 clear_spu_status(prev, spu); /* Step 10. */
1936 do_mfc_mssync(prev, spu); /* Step 11. */
1937 issue_mfc_tlbie(prev, spu); /* Step 12. */
1938 handle_pending_interrupts(prev, spu); /* Step 13. */
1939 purge_mfc_queue(prev, spu); /* Step 14. */
1940 wait_purge_complete(prev, spu); /* Step 15. */
1941 reset_spu_privcntl(prev, spu); /* Step 16. */
1942 reset_spu_lslr(prev, spu); /* Step 17. */
1943 setup_mfc_sr1(prev, spu); /* Step 18. */
1944 spu_invalidate_slbs(spu); /* Step 19. */
1945 reset_ch_part1(prev, spu); /* Step 20. */
1946 reset_ch_part2(prev, spu); /* Step 21. */
1947 enable_interrupts(prev, spu); /* Step 22. */
1948 set_switch_active(prev, spu); /* Step 23. */
1949 set_mfc_tclass_id(prev, spu); /* Step 24. */
1950 resume_mfc_queue(prev, spu); /* Step 25. */
1953 static void restore_lscsa(struct spu_state *next, struct spu *spu)
1956 * Perform steps 26-40 of SPU context restore sequence,
1957 * which restores regions of the local store and register
1961 set_watchdog_timer(next, spu); /* Step 26. */
1962 setup_spu_status_part1(next, spu); /* Step 27. */
1963 setup_spu_status_part2(next, spu); /* Step 28. */
1964 restore_mfc_rag(next, spu); /* Step 29. */
1966 setup_mfc_slbs(next, spu, spu_restore_code, sizeof(spu_restore_code));
1967 set_spu_npc(next, spu); /* Step 31. */
1968 set_signot1(next, spu); /* Step 32. */
1969 set_signot2(next, spu); /* Step 33. */
1970 setup_decr(next, spu); /* Step 34. */
1971 setup_ppu_mb(next, spu); /* Step 35. */
1972 setup_ppuint_mb(next, spu); /* Step 36. */
1973 send_restore_code(next, spu); /* Step 37. */
1974 set_ppu_querymask(next, spu); /* Step 38. */
1975 wait_tag_complete(next, spu); /* Step 39. */
1976 wait_spu_stopped(next, spu); /* Step 40. */
1979 static void restore_csa(struct spu_state *next, struct spu *spu)
1982 * Combine steps 41-76 of SPU context restore sequence, which
1983 * restore regions of the privileged & problem state areas.
1986 restore_spu_privcntl(next, spu); /* Step 41. */
1987 restore_status_part1(next, spu); /* Step 42. */
1988 restore_status_part2(next, spu); /* Step 43. */
1989 restore_ls_16kb(next, spu); /* Step 44. */
1990 wait_tag_complete(next, spu); /* Step 45. */
1991 suspend_mfc(next, spu); /* Step 46. */
1992 wait_suspend_mfc_complete(next, spu); /* Step 47. */
1993 issue_mfc_tlbie(next, spu); /* Step 48. */
1994 clear_interrupts(next, spu); /* Step 49. */
1995 restore_mfc_queues(next, spu); /* Step 50. */
1996 restore_ppu_querymask(next, spu); /* Step 51. */
1997 restore_ppu_querytype(next, spu); /* Step 52. */
1998 restore_mfc_csr_tsq(next, spu); /* Step 53. */
1999 restore_mfc_csr_cmd(next, spu); /* Step 54. */
2000 restore_mfc_csr_ato(next, spu); /* Step 55. */
2001 restore_mfc_tclass_id(next, spu); /* Step 56. */
2002 set_llr_event(next, spu); /* Step 57. */
2003 restore_decr_wrapped(next, spu); /* Step 58. */
2004 restore_ch_part1(next, spu); /* Step 59. */
2005 restore_ch_part2(next, spu); /* Step 60. */
2006 restore_spu_lslr(next, spu); /* Step 61. */
2007 restore_spu_cfg(next, spu); /* Step 62. */
2008 restore_pm_trace(next, spu); /* Step 63. */
2009 restore_spu_npc(next, spu); /* Step 64. */
2010 restore_spu_mb(next, spu); /* Step 65. */
2011 check_ppu_mb_stat(next, spu); /* Step 66. */
2012 check_ppuint_mb_stat(next, spu); /* Step 67. */
2013 spu_invalidate_slbs(spu); /* Modified Step 68. */
2014 restore_mfc_sr1(next, spu); /* Step 69. */
2015 set_int_route(next, spu); /* NEW */
2016 restore_other_spu_access(next, spu); /* Step 70. */
2017 restore_spu_runcntl(next, spu); /* Step 71. */
2018 restore_mfc_cntl(next, spu); /* Step 72. */
2019 enable_user_access(next, spu); /* Step 73. */
2020 reset_switch_active(next, spu); /* Step 74. */
2021 reenable_interrupts(next, spu); /* Step 75. */
2024 static int __do_spu_save(struct spu_state *prev, struct spu *spu)
2029 * SPU context save can be broken into three phases:
2031 * (a) quiesce [steps 2-16].
2032 * (b) save of CSA, performed by PPE [steps 17-42]
2033 * (c) save of LSCSA, mostly performed by SPU [steps 43-52].
2035 * Returns 0 on success.
2036 * 2,6 if failed to quiece SPU
2037 * 53 if SPU-side of save failed.
2040 rc = quiece_spu(prev, spu); /* Steps 2-16. */
2051 save_csa(prev, spu); /* Steps 17-43. */
2052 save_lscsa(prev, spu); /* Steps 44-53. */
2053 return check_save_status(prev, spu); /* Step 54. */
2056 static int __do_spu_restore(struct spu_state *next, struct spu *spu)
2061 * SPU context restore can be broken into three phases:
2063 * (a) harvest (or reset) SPU [steps 2-24].
2064 * (b) restore LSCSA [steps 25-40], mostly performed by SPU.
2065 * (c) restore CSA [steps 41-76], performed by PPE.
2067 * The 'harvest' step is not performed here, but rather
2071 restore_lscsa(next, spu); /* Steps 24-39. */
2072 rc = check_restore_status(next, spu); /* Step 40. */
2075 /* Failed. Return now. */
2079 /* Fall through to next step. */
2082 restore_csa(next, spu);
2088 * spu_save - SPU context save, with locking.
2089 * @prev: pointer to SPU context save area, to be saved.
2090 * @spu: pointer to SPU iomem structure.
2092 * Acquire locks, perform the save operation then return.
2094 int spu_save(struct spu_state *prev, struct spu *spu)
2098 acquire_spu_lock(spu); /* Step 1. */
2099 rc = __do_spu_save(prev, spu); /* Steps 2-53. */
2100 release_spu_lock(spu);
2101 if (rc != 0 && rc != 2 && rc != 6) {
2102 panic("%s failed on SPU[%d], rc=%d.\n",
2103 __func__, spu->number, rc);
2107 EXPORT_SYMBOL_GPL(spu_save);
2110 * spu_restore - SPU context restore, with harvest and locking.
2111 * @new: pointer to SPU context save area, to be restored.
2112 * @spu: pointer to SPU iomem structure.
2114 * Perform harvest + restore, as we may not be coming
2115 * from a previous successful save operation, and the
2116 * hardware state is unknown.
2118 int spu_restore(struct spu_state *new, struct spu *spu)
2122 acquire_spu_lock(spu);
2124 spu->slb_replace = 0;
2125 rc = __do_spu_restore(new, spu);
2126 release_spu_lock(spu);
2128 panic("%s failed on SPU[%d] rc=%d.\n",
2129 __func__, spu->number, rc);
2133 EXPORT_SYMBOL_GPL(spu_restore);
2135 static void init_prob(struct spu_state *csa)
2137 csa->spu_chnlcnt_RW[9] = 1;
2138 csa->spu_chnlcnt_RW[21] = 16;
2139 csa->spu_chnlcnt_RW[23] = 1;
2140 csa->spu_chnlcnt_RW[28] = 1;
2141 csa->spu_chnlcnt_RW[30] = 1;
2142 csa->prob.spu_runcntl_RW = SPU_RUNCNTL_STOP;
2143 csa->prob.mb_stat_R = 0x000400;
2146 static void init_priv1(struct spu_state *csa)
2148 /* Enable decode, relocate, tlbie response, master runcntl. */
2149 csa->priv1.mfc_sr1_RW = MFC_STATE1_LOCAL_STORAGE_DECODE_MASK |
2150 MFC_STATE1_MASTER_RUN_CONTROL_MASK |
2151 MFC_STATE1_PROBLEM_STATE_MASK |
2152 MFC_STATE1_RELOCATE_MASK | MFC_STATE1_BUS_TLBIE_MASK;
2154 /* Enable OS-specific set of interrupts. */
2155 csa->priv1.int_mask_class0_RW = CLASS0_ENABLE_DMA_ALIGNMENT_INTR |
2156 CLASS0_ENABLE_INVALID_DMA_COMMAND_INTR |
2157 CLASS0_ENABLE_SPU_ERROR_INTR;
2158 csa->priv1.int_mask_class1_RW = CLASS1_ENABLE_SEGMENT_FAULT_INTR |
2159 CLASS1_ENABLE_STORAGE_FAULT_INTR;
2160 csa->priv1.int_mask_class2_RW = CLASS2_ENABLE_SPU_STOP_INTR |
2161 CLASS2_ENABLE_SPU_HALT_INTR |
2162 CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR;
2165 static void init_priv2(struct spu_state *csa)
2167 csa->priv2.spu_lslr_RW = LS_ADDR_MASK;
2168 csa->priv2.mfc_control_RW = MFC_CNTL_RESUME_DMA_QUEUE |
2169 MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION |
2170 MFC_CNTL_DMA_QUEUES_EMPTY_MASK;
2174 * spu_alloc_csa - allocate and initialize an SPU context save area.
2176 * Allocate and initialize the contents of an SPU context save area.
2177 * This includes enabling address translation, interrupt masks, etc.,
2178 * as appropriate for the given OS environment.
2180 * Note that storage for the 'lscsa' is allocated separately,
2181 * as it is by far the largest of the context save regions,
2182 * and may need to be pinned or otherwise specially aligned.
2184 int spu_init_csa(struct spu_state *csa)
2190 memset(csa, 0, sizeof(struct spu_state));
2192 rc = spu_alloc_lscsa(csa);
2196 spin_lock_init(&csa->register_lock);
2205 void spu_fini_csa(struct spu_state *csa)
2207 spu_free_lscsa(csa);