arm64: dts: qcom: sm8550: add TRNG node
[linux-modified.git] / arch / powerpc / perf / hv-gpci.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Hypervisor supplied "gpci" ("get performance counter info") performance
4  * counter support
5  *
6  * Author: Cody P Schafer <cody@linux.vnet.ibm.com>
7  * Copyright 2014 IBM Corporation.
8  */
9
10 #define pr_fmt(fmt) "hv-gpci: " fmt
11
12 #include <linux/init.h>
13 #include <linux/perf_event.h>
14 #include <asm/firmware.h>
15 #include <asm/hvcall.h>
16 #include <asm/io.h>
17
18 #include "hv-gpci.h"
19 #include "hv-common.h"
20
21 /*
22  * Example usage:
23  *  perf stat -e 'hv_gpci/counter_info_version=3,offset=0,length=8,
24  *                secondary_index=0,starting_index=0xffffffff,request=0x10/' ...
25  */
26
27 /* u32 */
28 EVENT_DEFINE_RANGE_FORMAT(request, config, 0, 31);
29 /* u32 */
30 /*
31  * Note that starting_index, phys_processor_idx, sibling_part_id,
32  * hw_chip_id, partition_id all refer to the same bit range. They
33  * are basically aliases for the starting_index. The specific alias
34  * used depends on the event. See REQUEST_IDX_KIND in hv-gpci-requests.h
35  */
36 EVENT_DEFINE_RANGE_FORMAT(starting_index, config, 32, 63);
37 EVENT_DEFINE_RANGE_FORMAT_LITE(phys_processor_idx, config, 32, 63);
38 EVENT_DEFINE_RANGE_FORMAT_LITE(sibling_part_id, config, 32, 63);
39 EVENT_DEFINE_RANGE_FORMAT_LITE(hw_chip_id, config, 32, 63);
40 EVENT_DEFINE_RANGE_FORMAT_LITE(partition_id, config, 32, 63);
41
42 /* u16 */
43 EVENT_DEFINE_RANGE_FORMAT(secondary_index, config1, 0, 15);
44 /* u8 */
45 EVENT_DEFINE_RANGE_FORMAT(counter_info_version, config1, 16, 23);
46 /* u8, bytes of data (1-8) */
47 EVENT_DEFINE_RANGE_FORMAT(length, config1, 24, 31);
48 /* u32, byte offset */
49 EVENT_DEFINE_RANGE_FORMAT(offset, config1, 32, 63);
50
51 static cpumask_t hv_gpci_cpumask;
52
53 static struct attribute *format_attrs[] = {
54         &format_attr_request.attr,
55         &format_attr_starting_index.attr,
56         &format_attr_phys_processor_idx.attr,
57         &format_attr_sibling_part_id.attr,
58         &format_attr_hw_chip_id.attr,
59         &format_attr_partition_id.attr,
60         &format_attr_secondary_index.attr,
61         &format_attr_counter_info_version.attr,
62
63         &format_attr_offset.attr,
64         &format_attr_length.attr,
65         NULL,
66 };
67
68 static const struct attribute_group format_group = {
69         .name = "format",
70         .attrs = format_attrs,
71 };
72
73 static struct attribute_group event_group = {
74         .name  = "events",
75         /* .attrs is set in init */
76 };
77
78 #define HV_CAPS_ATTR(_name, _format)                            \
79 static ssize_t _name##_show(struct device *dev,                 \
80                             struct device_attribute *attr,      \
81                             char *page)                         \
82 {                                                               \
83         struct hv_perf_caps caps;                               \
84         unsigned long hret = hv_perf_caps_get(&caps);           \
85         if (hret)                                               \
86                 return -EIO;                                    \
87                                                                 \
88         return sprintf(page, _format, caps._name);              \
89 }                                                               \
90 static struct device_attribute hv_caps_attr_##_name = __ATTR_RO(_name)
91
92 static ssize_t kernel_version_show(struct device *dev,
93                                    struct device_attribute *attr,
94                                    char *page)
95 {
96         return sprintf(page, "0x%x\n", COUNTER_INFO_VERSION_CURRENT);
97 }
98
99 static ssize_t cpumask_show(struct device *dev,
100                             struct device_attribute *attr, char *buf)
101 {
102         return cpumap_print_to_pagebuf(true, buf, &hv_gpci_cpumask);
103 }
104
105 /* Interface attribute array index to store system information */
106 #define INTERFACE_PROCESSOR_BUS_TOPOLOGY_ATTR   6
107 #define INTERFACE_PROCESSOR_CONFIG_ATTR         7
108 #define INTERFACE_AFFINITY_DOMAIN_VIA_VP_ATTR   8
109 #define INTERFACE_AFFINITY_DOMAIN_VIA_DOM_ATTR  9
110 #define INTERFACE_AFFINITY_DOMAIN_VIA_PAR_ATTR  10
111 #define INTERFACE_NULL_ATTR                     11
112
113 /* Counter request value to retrieve system information */
114 enum {
115         PROCESSOR_BUS_TOPOLOGY,
116         PROCESSOR_CONFIG,
117         AFFINITY_DOMAIN_VIA_VP, /* affinity domain via virtual processor */
118         AFFINITY_DOMAIN_VIA_DOM, /* affinity domain via domain */
119         AFFINITY_DOMAIN_VIA_PAR, /* affinity domain via partition */
120 };
121
122 static int sysinfo_counter_request[] = {
123         [PROCESSOR_BUS_TOPOLOGY] = 0xD0,
124         [PROCESSOR_CONFIG] = 0x90,
125         [AFFINITY_DOMAIN_VIA_VP] = 0xA0,
126         [AFFINITY_DOMAIN_VIA_DOM] = 0xB0,
127         [AFFINITY_DOMAIN_VIA_PAR] = 0xB1,
128 };
129
130 static DEFINE_PER_CPU(char, hv_gpci_reqb[HGPCI_REQ_BUFFER_SIZE]) __aligned(sizeof(uint64_t));
131
132 static unsigned long systeminfo_gpci_request(u32 req, u32 starting_index,
133                         u16 secondary_index, char *buf,
134                         size_t *n, struct hv_gpci_request_buffer *arg)
135 {
136         unsigned long ret;
137         size_t i, j;
138
139         arg->params.counter_request = cpu_to_be32(req);
140         arg->params.starting_index = cpu_to_be32(starting_index);
141         arg->params.secondary_index = cpu_to_be16(secondary_index);
142
143         ret = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO,
144                         virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE);
145
146         /*
147          * ret value as 'H_PARAMETER' corresponds to 'GEN_BUF_TOO_SMALL',
148          * which means that the current buffer size cannot accommodate
149          * all the information and a partial buffer returned.
150          * hcall fails incase of ret value other than H_SUCCESS or H_PARAMETER.
151          *
152          * ret value as H_AUTHORITY implies that partition is not permitted to retrieve
153          * performance information, and required to set
154          * "Enable Performance Information Collection" option.
155          */
156         if (ret == H_AUTHORITY)
157                 return -EPERM;
158
159         /*
160          * hcall can fail with other possible ret value like H_PRIVILEGE/H_HARDWARE
161          * because of invalid buffer-length/address or due to some hardware
162          * error.
163          */
164         if (ret && (ret != H_PARAMETER))
165                 return -EIO;
166
167         /*
168          * hcall H_GET_PERF_COUNTER_INFO populates the 'returned_values'
169          * to show the total number of counter_value array elements
170          * returned via hcall.
171          * hcall also populates 'cv_element_size' corresponds to individual
172          * counter_value array element size. Below loop go through all
173          * counter_value array elements as per their size and add it to
174          * the output buffer.
175          */
176         for (i = 0; i < be16_to_cpu(arg->params.returned_values); i++) {
177                 j = i * be16_to_cpu(arg->params.cv_element_size);
178
179                 for (; j < (i + 1) * be16_to_cpu(arg->params.cv_element_size); j++)
180                         *n += sprintf(buf + *n,  "%02x", (u8)arg->bytes[j]);
181                 *n += sprintf(buf + *n,  "\n");
182         }
183
184         if (*n >= PAGE_SIZE) {
185                 pr_info("System information exceeds PAGE_SIZE\n");
186                 return -EFBIG;
187         }
188
189         return ret;
190 }
191
192 static ssize_t processor_bus_topology_show(struct device *dev, struct device_attribute *attr,
193                                 char *buf)
194 {
195         struct hv_gpci_request_buffer *arg;
196         unsigned long ret;
197         size_t n = 0;
198
199         arg = (void *)get_cpu_var(hv_gpci_reqb);
200         memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
201
202         /*
203          * Pass the counter request value 0xD0 corresponds to request
204          * type 'Processor_bus_topology', to retrieve
205          * the system topology information.
206          * starting_index value implies the starting hardware
207          * chip id.
208          */
209         ret = systeminfo_gpci_request(sysinfo_counter_request[PROCESSOR_BUS_TOPOLOGY],
210                         0, 0, buf, &n, arg);
211
212         if (!ret)
213                 return n;
214
215         if (ret != H_PARAMETER)
216                 goto out;
217
218         /*
219          * ret value as 'H_PARAMETER' corresponds to 'GEN_BUF_TOO_SMALL', which
220          * implies that buffer can't accommodate all information, and a partial buffer
221          * returned. To handle that, we need to make subsequent requests
222          * with next starting index to retrieve additional (missing) data.
223          * Below loop do subsequent hcalls with next starting index and add it
224          * to buffer util we get all the information.
225          */
226         while (ret == H_PARAMETER) {
227                 int returned_values = be16_to_cpu(arg->params.returned_values);
228                 int elementsize = be16_to_cpu(arg->params.cv_element_size);
229                 int last_element = (returned_values - 1) * elementsize;
230
231                 /*
232                  * Since the starting index value is part of counter_value
233                  * buffer elements, use the starting index value in the last
234                  * element and add 1 to make subsequent hcalls.
235                  */
236                 u32 starting_index = arg->bytes[last_element + 3] +
237                                 (arg->bytes[last_element + 2] << 8) +
238                                 (arg->bytes[last_element + 1] << 16) +
239                                 (arg->bytes[last_element] << 24) + 1;
240
241                 memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
242
243                 ret = systeminfo_gpci_request(sysinfo_counter_request[PROCESSOR_BUS_TOPOLOGY],
244                                 starting_index, 0, buf, &n, arg);
245
246                 if (!ret)
247                         return n;
248
249                 if (ret != H_PARAMETER)
250                         goto out;
251         }
252
253         return n;
254
255 out:
256         put_cpu_var(hv_gpci_reqb);
257         return ret;
258 }
259
260 static ssize_t processor_config_show(struct device *dev, struct device_attribute *attr,
261                                         char *buf)
262 {
263         struct hv_gpci_request_buffer *arg;
264         unsigned long ret;
265         size_t n = 0;
266
267         arg = (void *)get_cpu_var(hv_gpci_reqb);
268         memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
269
270         /*
271          * Pass the counter request value 0x90 corresponds to request
272          * type 'Processor_config', to retrieve
273          * the system processor information.
274          * starting_index value implies the starting hardware
275          * processor index.
276          */
277         ret = systeminfo_gpci_request(sysinfo_counter_request[PROCESSOR_CONFIG],
278                         0, 0, buf, &n, arg);
279
280         if (!ret)
281                 return n;
282
283         if (ret != H_PARAMETER)
284                 goto out;
285
286         /*
287          * ret value as 'H_PARAMETER' corresponds to 'GEN_BUF_TOO_SMALL', which
288          * implies that buffer can't accommodate all information, and a partial buffer
289          * returned. To handle that, we need to take subsequent requests
290          * with next starting index to retrieve additional (missing) data.
291          * Below loop do subsequent hcalls with next starting index and add it
292          * to buffer util we get all the information.
293          */
294         while (ret == H_PARAMETER) {
295                 int returned_values = be16_to_cpu(arg->params.returned_values);
296                 int elementsize = be16_to_cpu(arg->params.cv_element_size);
297                 int last_element = (returned_values - 1) * elementsize;
298
299                 /*
300                  * Since the starting index is part of counter_value
301                  * buffer elements, use the starting index value in the last
302                  * element and add 1 to subsequent hcalls.
303                  */
304                 u32 starting_index = arg->bytes[last_element + 3] +
305                                 (arg->bytes[last_element + 2] << 8) +
306                                 (arg->bytes[last_element + 1] << 16) +
307                                 (arg->bytes[last_element] << 24) + 1;
308
309                 memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
310
311                 ret = systeminfo_gpci_request(sysinfo_counter_request[PROCESSOR_CONFIG],
312                                 starting_index, 0, buf, &n, arg);
313
314                 if (!ret)
315                         return n;
316
317                 if (ret != H_PARAMETER)
318                         goto out;
319         }
320
321         return n;
322
323 out:
324         put_cpu_var(hv_gpci_reqb);
325         return ret;
326 }
327
328 static ssize_t affinity_domain_via_virtual_processor_show(struct device *dev,
329                         struct device_attribute *attr, char *buf)
330 {
331         struct hv_gpci_request_buffer *arg;
332         unsigned long ret;
333         size_t n = 0;
334
335         arg = (void *)get_cpu_var(hv_gpci_reqb);
336         memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
337
338         /*
339          * Pass the counter request 0xA0 corresponds to request
340          * type 'Affinity_domain_information_by_virutal_processor',
341          * to retrieve the system affinity domain information.
342          * starting_index value refers to the starting hardware
343          * processor index.
344          */
345         ret = systeminfo_gpci_request(sysinfo_counter_request[AFFINITY_DOMAIN_VIA_VP],
346                         0, 0, buf, &n, arg);
347
348         if (!ret)
349                 return n;
350
351         if (ret != H_PARAMETER)
352                 goto out;
353
354         /*
355          * ret value as 'H_PARAMETER' corresponds to 'GEN_BUF_TOO_SMALL', which
356          * implies that buffer can't accommodate all information, and a partial buffer
357          * returned. To handle that, we need to take subsequent requests
358          * with next secondary index to retrieve additional (missing) data.
359          * Below loop do subsequent hcalls with next secondary index and add it
360          * to buffer util we get all the information.
361          */
362         while (ret == H_PARAMETER) {
363                 int returned_values = be16_to_cpu(arg->params.returned_values);
364                 int elementsize = be16_to_cpu(arg->params.cv_element_size);
365                 int last_element = (returned_values - 1) * elementsize;
366
367                 /*
368                  * Since the starting index and secondary index type is part of the
369                  * counter_value buffer elements, use the starting index value in the
370                  * last array element as subsequent starting index, and use secondary index
371                  * value in the last array element plus 1 as subsequent secondary index.
372                  * For counter request '0xA0', starting index points to partition id
373                  * and secondary index points to corresponding virtual processor index.
374                  */
375                 u32 starting_index = arg->bytes[last_element + 1] + (arg->bytes[last_element] << 8);
376                 u16 secondary_index = arg->bytes[last_element + 3] +
377                                 (arg->bytes[last_element + 2] << 8) + 1;
378
379                 memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
380
381                 ret = systeminfo_gpci_request(sysinfo_counter_request[AFFINITY_DOMAIN_VIA_VP],
382                                 starting_index, secondary_index, buf, &n, arg);
383
384                 if (!ret)
385                         return n;
386
387                 if (ret != H_PARAMETER)
388                         goto out;
389         }
390
391         return n;
392
393 out:
394         put_cpu_var(hv_gpci_reqb);
395         return ret;
396 }
397
398 static ssize_t affinity_domain_via_domain_show(struct device *dev, struct device_attribute *attr,
399                                                 char *buf)
400 {
401         struct hv_gpci_request_buffer *arg;
402         unsigned long ret;
403         size_t n = 0;
404
405         arg = (void *)get_cpu_var(hv_gpci_reqb);
406         memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
407
408         /*
409          * Pass the counter request 0xB0 corresponds to request
410          * type 'Affinity_domain_information_by_domain',
411          * to retrieve the system affinity domain information.
412          * starting_index value refers to the starting hardware
413          * processor index.
414          */
415         ret = systeminfo_gpci_request(sysinfo_counter_request[AFFINITY_DOMAIN_VIA_DOM],
416                         0, 0, buf, &n, arg);
417
418         if (!ret)
419                 return n;
420
421         if (ret != H_PARAMETER)
422                 goto out;
423
424         /*
425          * ret value as 'H_PARAMETER' corresponds to 'GEN_BUF_TOO_SMALL', which
426          * implies that buffer can't accommodate all information, and a partial buffer
427          * returned. To handle that, we need to take subsequent requests
428          * with next starting index to retrieve additional (missing) data.
429          * Below loop do subsequent hcalls with next starting index and add it
430          * to buffer util we get all the information.
431          */
432         while (ret == H_PARAMETER) {
433                 int returned_values = be16_to_cpu(arg->params.returned_values);
434                 int elementsize = be16_to_cpu(arg->params.cv_element_size);
435                 int last_element = (returned_values - 1) * elementsize;
436
437                 /*
438                  * Since the starting index value is part of counter_value
439                  * buffer elements, use the starting index value in the last
440                  * element and add 1 to make subsequent hcalls.
441                  */
442                 u32 starting_index = arg->bytes[last_element + 1] +
443                         (arg->bytes[last_element] << 8) + 1;
444
445                 memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
446
447                 ret = systeminfo_gpci_request(sysinfo_counter_request[AFFINITY_DOMAIN_VIA_DOM],
448                                         starting_index, 0, buf, &n, arg);
449
450                 if (!ret)
451                         return n;
452
453                 if (ret != H_PARAMETER)
454                         goto out;
455         }
456
457         return n;
458
459 out:
460         put_cpu_var(hv_gpci_reqb);
461         return ret;
462 }
463
464 static void affinity_domain_via_partition_result_parse(int returned_values,
465                         int element_size, char *buf, size_t *last_element,
466                         size_t *n, struct hv_gpci_request_buffer *arg)
467 {
468         size_t i = 0, j = 0;
469         size_t k, l, m;
470         uint16_t total_affinity_domain_ele, size_of_each_affinity_domain_ele;
471
472         /*
473          * hcall H_GET_PERF_COUNTER_INFO populates the 'returned_values'
474          * to show the total number of counter_value array elements
475          * returned via hcall.
476          * Unlike other request types, the data structure returned by this
477          * request is variable-size. For this counter request type,
478          * hcall populates 'cv_element_size' corresponds to minimum size of
479          * the structure returned i.e; the size of the structure with no domain
480          * information. Below loop go through all counter_value array
481          * to determine the number and size of each domain array element and
482          * add it to the output buffer.
483          */
484         while (i < returned_values) {
485                 k = j;
486                 for (; k < j + element_size; k++)
487                         *n += sprintf(buf + *n,  "%02x", (u8)arg->bytes[k]);
488                 *n += sprintf(buf + *n,  "\n");
489
490                 total_affinity_domain_ele = (u8)arg->bytes[k - 2] << 8 | (u8)arg->bytes[k - 3];
491                 size_of_each_affinity_domain_ele = (u8)arg->bytes[k] << 8 | (u8)arg->bytes[k - 1];
492
493                 for (l = 0; l < total_affinity_domain_ele; l++) {
494                         for (m = 0; m < size_of_each_affinity_domain_ele; m++) {
495                                 *n += sprintf(buf + *n,  "%02x", (u8)arg->bytes[k]);
496                                 k++;
497                         }
498                         *n += sprintf(buf + *n,  "\n");
499                 }
500
501                 *n += sprintf(buf + *n,  "\n");
502                 i++;
503                 j = k;
504         }
505
506         *last_element = k;
507 }
508
509 static ssize_t affinity_domain_via_partition_show(struct device *dev, struct device_attribute *attr,
510                                                         char *buf)
511 {
512         struct hv_gpci_request_buffer *arg;
513         unsigned long ret;
514         size_t n = 0;
515         size_t last_element = 0;
516         u32 starting_index;
517
518         arg = (void *)get_cpu_var(hv_gpci_reqb);
519         memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
520
521         /*
522          * Pass the counter request value 0xB1 corresponds to counter request
523          * type 'Affinity_domain_information_by_partition',
524          * to retrieve the system affinity domain by partition information.
525          * starting_index value refers to the starting hardware
526          * processor index.
527          */
528         arg->params.counter_request = cpu_to_be32(sysinfo_counter_request[AFFINITY_DOMAIN_VIA_PAR]);
529         arg->params.starting_index = cpu_to_be32(0);
530
531         ret = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO,
532                         virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE);
533
534         if (!ret)
535                 goto parse_result;
536
537         /*
538          * ret value as 'H_PARAMETER' implies that the current buffer size
539          * can't accommodate all the information, and a partial buffer
540          * returned. To handle that, we need to make subsequent requests
541          * with next starting index to retrieve additional (missing) data.
542          * Below loop do subsequent hcalls with next starting index and add it
543          * to buffer util we get all the information.
544          */
545         while (ret == H_PARAMETER) {
546                 affinity_domain_via_partition_result_parse(
547                         be16_to_cpu(arg->params.returned_values) - 1,
548                         be16_to_cpu(arg->params.cv_element_size), buf,
549                         &last_element, &n, arg);
550
551                 if (n >= PAGE_SIZE) {
552                         put_cpu_var(hv_gpci_reqb);
553                         pr_debug("System information exceeds PAGE_SIZE\n");
554                         return -EFBIG;
555                 }
556
557                 /*
558                  * Since the starting index value is part of counter_value
559                  * buffer elements, use the starting_index value in the last
560                  * element and add 1 to make subsequent hcalls.
561                  */
562                 starting_index = (u8)arg->bytes[last_element] << 8 |
563                                 (u8)arg->bytes[last_element + 1];
564
565                 memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
566                 arg->params.counter_request = cpu_to_be32(
567                                 sysinfo_counter_request[AFFINITY_DOMAIN_VIA_PAR]);
568                 arg->params.starting_index = cpu_to_be32(starting_index);
569
570                 ret = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO,
571                                 virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE);
572
573                 if (ret && (ret != H_PARAMETER))
574                         goto out;
575         }
576
577 parse_result:
578         affinity_domain_via_partition_result_parse(
579                 be16_to_cpu(arg->params.returned_values),
580                 be16_to_cpu(arg->params.cv_element_size),
581                 buf, &last_element, &n, arg);
582
583         put_cpu_var(hv_gpci_reqb);
584         return n;
585
586 out:
587         put_cpu_var(hv_gpci_reqb);
588
589         /*
590          * ret value as 'H_PARAMETER' corresponds to 'GEN_BUF_TOO_SMALL',
591          * which means that the current buffer size cannot accommodate
592          * all the information and a partial buffer returned.
593          * hcall fails incase of ret value other than H_SUCCESS or H_PARAMETER.
594          *
595          * ret value as H_AUTHORITY implies that partition is not permitted to retrieve
596          * performance information, and required to set
597          * "Enable Performance Information Collection" option.
598          */
599         if (ret == H_AUTHORITY)
600                 return -EPERM;
601
602         /*
603          * hcall can fail with other possible ret value like H_PRIVILEGE/H_HARDWARE
604          * because of invalid buffer-length/address or due to some hardware
605          * error.
606          */
607         return -EIO;
608 }
609
610 static DEVICE_ATTR_RO(kernel_version);
611 static DEVICE_ATTR_RO(cpumask);
612
613 HV_CAPS_ATTR(version, "0x%x\n");
614 HV_CAPS_ATTR(ga, "%d\n");
615 HV_CAPS_ATTR(expanded, "%d\n");
616 HV_CAPS_ATTR(lab, "%d\n");
617 HV_CAPS_ATTR(collect_privileged, "%d\n");
618
619 static struct attribute *interface_attrs[] = {
620         &dev_attr_kernel_version.attr,
621         &hv_caps_attr_version.attr,
622         &hv_caps_attr_ga.attr,
623         &hv_caps_attr_expanded.attr,
624         &hv_caps_attr_lab.attr,
625         &hv_caps_attr_collect_privileged.attr,
626         /*
627          * This NULL is a placeholder for the processor_bus_topology
628          * attribute, set in init function if applicable.
629          */
630         NULL,
631         /*
632          * This NULL is a placeholder for the processor_config
633          * attribute, set in init function if applicable.
634          */
635         NULL,
636         /*
637          * This NULL is a placeholder for the affinity_domain_via_virtual_processor
638          * attribute, set in init function if applicable.
639          */
640         NULL,
641         /*
642          * This NULL is a placeholder for the affinity_domain_via_domain
643          * attribute, set in init function if applicable.
644          */
645         NULL,
646         /*
647          * This NULL is a placeholder for the affinity_domain_via_partition
648          * attribute, set in init function if applicable.
649          */
650         NULL,
651         NULL,
652 };
653
654 static struct attribute *cpumask_attrs[] = {
655         &dev_attr_cpumask.attr,
656         NULL,
657 };
658
659 static const struct attribute_group cpumask_attr_group = {
660         .attrs = cpumask_attrs,
661 };
662
663 static const struct attribute_group interface_group = {
664         .name = "interface",
665         .attrs = interface_attrs,
666 };
667
668 static const struct attribute_group *attr_groups[] = {
669         &format_group,
670         &event_group,
671         &interface_group,
672         &cpumask_attr_group,
673         NULL,
674 };
675
676 static unsigned long single_gpci_request(u32 req, u32 starting_index,
677                 u16 secondary_index, u8 version_in, u32 offset, u8 length,
678                 u64 *value)
679 {
680         unsigned long ret;
681         size_t i;
682         u64 count;
683         struct hv_gpci_request_buffer *arg;
684
685         arg = (void *)get_cpu_var(hv_gpci_reqb);
686         memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
687
688         arg->params.counter_request = cpu_to_be32(req);
689         arg->params.starting_index = cpu_to_be32(starting_index);
690         arg->params.secondary_index = cpu_to_be16(secondary_index);
691         arg->params.counter_info_version_in = version_in;
692
693         ret = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO,
694                         virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE);
695         if (ret) {
696                 pr_devel("hcall failed: 0x%lx\n", ret);
697                 goto out;
698         }
699
700         /*
701          * we verify offset and length are within the zeroed buffer at event
702          * init.
703          */
704         count = 0;
705         for (i = offset; i < offset + length; i++)
706                 count |= (u64)(arg->bytes[i]) << ((length - 1 - (i - offset)) * 8);
707
708         *value = count;
709 out:
710         put_cpu_var(hv_gpci_reqb);
711         return ret;
712 }
713
714 static u64 h_gpci_get_value(struct perf_event *event)
715 {
716         u64 count;
717         unsigned long ret = single_gpci_request(event_get_request(event),
718                                         event_get_starting_index(event),
719                                         event_get_secondary_index(event),
720                                         event_get_counter_info_version(event),
721                                         event_get_offset(event),
722                                         event_get_length(event),
723                                         &count);
724         if (ret)
725                 return 0;
726         return count;
727 }
728
729 static void h_gpci_event_update(struct perf_event *event)
730 {
731         s64 prev;
732         u64 now = h_gpci_get_value(event);
733         prev = local64_xchg(&event->hw.prev_count, now);
734         local64_add(now - prev, &event->count);
735 }
736
737 static void h_gpci_event_start(struct perf_event *event, int flags)
738 {
739         local64_set(&event->hw.prev_count, h_gpci_get_value(event));
740 }
741
742 static void h_gpci_event_stop(struct perf_event *event, int flags)
743 {
744         h_gpci_event_update(event);
745 }
746
747 static int h_gpci_event_add(struct perf_event *event, int flags)
748 {
749         if (flags & PERF_EF_START)
750                 h_gpci_event_start(event, flags);
751
752         return 0;
753 }
754
755 static int h_gpci_event_init(struct perf_event *event)
756 {
757         u64 count;
758         u8 length;
759
760         /* Not our event */
761         if (event->attr.type != event->pmu->type)
762                 return -ENOENT;
763
764         /* config2 is unused */
765         if (event->attr.config2) {
766                 pr_devel("config2 set when reserved\n");
767                 return -EINVAL;
768         }
769
770         /* no branch sampling */
771         if (has_branch_stack(event))
772                 return -EOPNOTSUPP;
773
774         length = event_get_length(event);
775         if (length < 1 || length > 8) {
776                 pr_devel("length invalid\n");
777                 return -EINVAL;
778         }
779
780         /* last byte within the buffer? */
781         if ((event_get_offset(event) + length) > HGPCI_MAX_DATA_BYTES) {
782                 pr_devel("request outside of buffer: %zu > %zu\n",
783                                 (size_t)event_get_offset(event) + length,
784                                 HGPCI_MAX_DATA_BYTES);
785                 return -EINVAL;
786         }
787
788         /* check if the request works... */
789         if (single_gpci_request(event_get_request(event),
790                                 event_get_starting_index(event),
791                                 event_get_secondary_index(event),
792                                 event_get_counter_info_version(event),
793                                 event_get_offset(event),
794                                 length,
795                                 &count)) {
796                 pr_devel("gpci hcall failed\n");
797                 return -EINVAL;
798         }
799
800         return 0;
801 }
802
803 static struct pmu h_gpci_pmu = {
804         .task_ctx_nr = perf_invalid_context,
805
806         .name = "hv_gpci",
807         .attr_groups = attr_groups,
808         .event_init  = h_gpci_event_init,
809         .add         = h_gpci_event_add,
810         .del         = h_gpci_event_stop,
811         .start       = h_gpci_event_start,
812         .stop        = h_gpci_event_stop,
813         .read        = h_gpci_event_update,
814         .capabilities = PERF_PMU_CAP_NO_EXCLUDE,
815 };
816
817 static int ppc_hv_gpci_cpu_online(unsigned int cpu)
818 {
819         if (cpumask_empty(&hv_gpci_cpumask))
820                 cpumask_set_cpu(cpu, &hv_gpci_cpumask);
821
822         return 0;
823 }
824
825 static int ppc_hv_gpci_cpu_offline(unsigned int cpu)
826 {
827         int target;
828
829         /* Check if exiting cpu is used for collecting gpci events */
830         if (!cpumask_test_and_clear_cpu(cpu, &hv_gpci_cpumask))
831                 return 0;
832
833         /* Find a new cpu to collect gpci events */
834         target = cpumask_last(cpu_active_mask);
835
836         if (target < 0 || target >= nr_cpu_ids) {
837                 pr_err("hv_gpci: CPU hotplug init failed\n");
838                 return -1;
839         }
840
841         /* Migrate gpci events to the new target */
842         cpumask_set_cpu(target, &hv_gpci_cpumask);
843         perf_pmu_migrate_context(&h_gpci_pmu, cpu, target);
844
845         return 0;
846 }
847
848 static int hv_gpci_cpu_hotplug_init(void)
849 {
850         return cpuhp_setup_state(CPUHP_AP_PERF_POWERPC_HV_GPCI_ONLINE,
851                           "perf/powerpc/hv_gcpi:online",
852                           ppc_hv_gpci_cpu_online,
853                           ppc_hv_gpci_cpu_offline);
854 }
855
856 static struct device_attribute *sysinfo_device_attr_create(int
857                 sysinfo_interface_group_index, u32 req)
858 {
859         struct device_attribute *attr = NULL;
860         unsigned long ret;
861         struct hv_gpci_request_buffer *arg;
862
863         if (sysinfo_interface_group_index < INTERFACE_PROCESSOR_BUS_TOPOLOGY_ATTR ||
864                         sysinfo_interface_group_index >= INTERFACE_NULL_ATTR) {
865                 pr_info("Wrong interface group index for system information\n");
866                 return NULL;
867         }
868
869         /* Check for given counter request value support */
870         arg = (void *)get_cpu_var(hv_gpci_reqb);
871         memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
872
873         arg->params.counter_request = cpu_to_be32(req);
874
875         ret = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO,
876                         virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE);
877
878         put_cpu_var(hv_gpci_reqb);
879
880         /*
881          * Add given counter request value attribute in the interface_attrs
882          * attribute array, only for valid return types.
883          */
884         if (!ret || ret == H_AUTHORITY || ret == H_PARAMETER) {
885                 attr = kzalloc(sizeof(*attr), GFP_KERNEL);
886                 if (!attr)
887                         return NULL;
888
889                 sysfs_attr_init(&attr->attr);
890                 attr->attr.mode = 0444;
891
892                 switch (sysinfo_interface_group_index) {
893                 case INTERFACE_PROCESSOR_BUS_TOPOLOGY_ATTR:
894                         attr->attr.name = "processor_bus_topology";
895                         attr->show = processor_bus_topology_show;
896                 break;
897                 case INTERFACE_PROCESSOR_CONFIG_ATTR:
898                         attr->attr.name = "processor_config";
899                         attr->show = processor_config_show;
900                 break;
901                 case INTERFACE_AFFINITY_DOMAIN_VIA_VP_ATTR:
902                         attr->attr.name = "affinity_domain_via_virtual_processor";
903                         attr->show = affinity_domain_via_virtual_processor_show;
904                 break;
905                 case INTERFACE_AFFINITY_DOMAIN_VIA_DOM_ATTR:
906                         attr->attr.name = "affinity_domain_via_domain";
907                         attr->show = affinity_domain_via_domain_show;
908                 break;
909                 case INTERFACE_AFFINITY_DOMAIN_VIA_PAR_ATTR:
910                         attr->attr.name = "affinity_domain_via_partition";
911                         attr->show = affinity_domain_via_partition_show;
912                 break;
913                 }
914         } else
915                 pr_devel("hcall failed, with error: 0x%lx\n", ret);
916
917         return attr;
918 }
919
920 static void add_sysinfo_interface_files(void)
921 {
922         int sysfs_count;
923         struct device_attribute *attr[INTERFACE_NULL_ATTR - INTERFACE_PROCESSOR_BUS_TOPOLOGY_ATTR];
924         int i;
925
926         sysfs_count = INTERFACE_NULL_ATTR - INTERFACE_PROCESSOR_BUS_TOPOLOGY_ATTR;
927
928         /* Get device attribute for a given counter request value */
929         for (i = 0; i < sysfs_count; i++) {
930                 attr[i] = sysinfo_device_attr_create(i + INTERFACE_PROCESSOR_BUS_TOPOLOGY_ATTR,
931                                 sysinfo_counter_request[i]);
932
933                 if (!attr[i])
934                         goto out;
935         }
936
937         /* Add sysinfo interface attributes in the interface_attrs attribute array */
938         for (i = 0; i < sysfs_count; i++)
939                 interface_attrs[i + INTERFACE_PROCESSOR_BUS_TOPOLOGY_ATTR] = &attr[i]->attr;
940
941         return;
942
943 out:
944         /*
945          * The sysinfo interface attributes will be added, only if hcall passed for
946          * all the counter request values. Free the device attribute array incase
947          * of any hcall failure.
948          */
949         if (i > 0) {
950                 while (i >= 0) {
951                         kfree(attr[i]);
952                         i--;
953                 }
954         }
955 }
956
957 static int hv_gpci_init(void)
958 {
959         int r;
960         unsigned long hret;
961         struct hv_perf_caps caps;
962         struct hv_gpci_request_buffer *arg;
963
964         hv_gpci_assert_offsets_correct();
965
966         if (!firmware_has_feature(FW_FEATURE_LPAR)) {
967                 pr_debug("not a virtualized system, not enabling\n");
968                 return -ENODEV;
969         }
970
971         hret = hv_perf_caps_get(&caps);
972         if (hret) {
973                 pr_debug("could not obtain capabilities, not enabling, rc=%ld\n",
974                                 hret);
975                 return -ENODEV;
976         }
977
978         /* init cpuhotplug */
979         r = hv_gpci_cpu_hotplug_init();
980         if (r)
981                 return r;
982
983         /* sampling not supported */
984         h_gpci_pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
985
986         arg = (void *)get_cpu_var(hv_gpci_reqb);
987         memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
988
989         /*
990          * hcall H_GET_PERF_COUNTER_INFO populates the output
991          * counter_info_version value based on the system hypervisor.
992          * Pass the counter request 0x10 corresponds to request type
993          * 'Dispatch_timebase_by_processor', to get the supported
994          * counter_info_version.
995          */
996         arg->params.counter_request = cpu_to_be32(0x10);
997
998         r = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO,
999                         virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE);
1000         if (r) {
1001                 pr_devel("hcall failed, can't get supported counter_info_version: 0x%x\n", r);
1002                 arg->params.counter_info_version_out = 0x8;
1003         }
1004
1005         /*
1006          * Use counter_info_version_out value to assign
1007          * required hv-gpci event list.
1008          */
1009         if (arg->params.counter_info_version_out >= 0x8)
1010                 event_group.attrs = hv_gpci_event_attrs;
1011         else
1012                 event_group.attrs = hv_gpci_event_attrs_v6;
1013
1014         put_cpu_var(hv_gpci_reqb);
1015
1016         r = perf_pmu_register(&h_gpci_pmu, h_gpci_pmu.name, -1);
1017         if (r)
1018                 return r;
1019
1020         /* sysinfo interface files are only available for power10 and above platforms */
1021         if (PVR_VER(mfspr(SPRN_PVR)) >= PVR_POWER10)
1022                 add_sysinfo_interface_files();
1023
1024         return 0;
1025 }
1026
1027 device_initcall(hv_gpci_init);