GNU Linux-libre 6.7.9-gnu
[releases.git] / arch / powerpc / perf / hv-gpci.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Hypervisor supplied "gpci" ("get performance counter info") performance
4  * counter support
5  *
6  * Author: Cody P Schafer <cody@linux.vnet.ibm.com>
7  * Copyright 2014 IBM Corporation.
8  */
9
10 #define pr_fmt(fmt) "hv-gpci: " fmt
11
12 #include <linux/init.h>
13 #include <linux/perf_event.h>
14 #include <asm/firmware.h>
15 #include <asm/hvcall.h>
16 #include <asm/io.h>
17
18 #include "hv-gpci.h"
19 #include "hv-common.h"
20
21 /*
22  * Example usage:
23  *  perf stat -e 'hv_gpci/counter_info_version=3,offset=0,length=8,
24  *                secondary_index=0,starting_index=0xffffffff,request=0x10/' ...
25  */
26
27 /* u32 */
28 EVENT_DEFINE_RANGE_FORMAT(request, config, 0, 31);
29 /* u32 */
30 /*
31  * Note that starting_index, phys_processor_idx, sibling_part_id,
32  * hw_chip_id, partition_id all refer to the same bit range. They
33  * are basically aliases for the starting_index. The specific alias
34  * used depends on the event. See REQUEST_IDX_KIND in hv-gpci-requests.h
35  */
36 EVENT_DEFINE_RANGE_FORMAT(starting_index, config, 32, 63);
37 EVENT_DEFINE_RANGE_FORMAT_LITE(phys_processor_idx, config, 32, 63);
38 EVENT_DEFINE_RANGE_FORMAT_LITE(sibling_part_id, config, 32, 63);
39 EVENT_DEFINE_RANGE_FORMAT_LITE(hw_chip_id, config, 32, 63);
40 EVENT_DEFINE_RANGE_FORMAT_LITE(partition_id, config, 32, 63);
41
42 /* u16 */
43 EVENT_DEFINE_RANGE_FORMAT(secondary_index, config1, 0, 15);
44 /* u8 */
45 EVENT_DEFINE_RANGE_FORMAT(counter_info_version, config1, 16, 23);
46 /* u8, bytes of data (1-8) */
47 EVENT_DEFINE_RANGE_FORMAT(length, config1, 24, 31);
48 /* u32, byte offset */
49 EVENT_DEFINE_RANGE_FORMAT(offset, config1, 32, 63);
50
51 static cpumask_t hv_gpci_cpumask;
52
53 static struct attribute *format_attrs[] = {
54         &format_attr_request.attr,
55         &format_attr_starting_index.attr,
56         &format_attr_phys_processor_idx.attr,
57         &format_attr_sibling_part_id.attr,
58         &format_attr_hw_chip_id.attr,
59         &format_attr_partition_id.attr,
60         &format_attr_secondary_index.attr,
61         &format_attr_counter_info_version.attr,
62
63         &format_attr_offset.attr,
64         &format_attr_length.attr,
65         NULL,
66 };
67
68 static const struct attribute_group format_group = {
69         .name = "format",
70         .attrs = format_attrs,
71 };
72
73 static struct attribute_group event_group = {
74         .name  = "events",
75         /* .attrs is set in init */
76 };
77
78 #define HV_CAPS_ATTR(_name, _format)                            \
79 static ssize_t _name##_show(struct device *dev,                 \
80                             struct device_attribute *attr,      \
81                             char *page)                         \
82 {                                                               \
83         struct hv_perf_caps caps;                               \
84         unsigned long hret = hv_perf_caps_get(&caps);           \
85         if (hret)                                               \
86                 return -EIO;                                    \
87                                                                 \
88         return sprintf(page, _format, caps._name);              \
89 }                                                               \
90 static struct device_attribute hv_caps_attr_##_name = __ATTR_RO(_name)
91
92 static ssize_t kernel_version_show(struct device *dev,
93                                    struct device_attribute *attr,
94                                    char *page)
95 {
96         return sprintf(page, "0x%x\n", COUNTER_INFO_VERSION_CURRENT);
97 }
98
99 static ssize_t cpumask_show(struct device *dev,
100                             struct device_attribute *attr, char *buf)
101 {
102         return cpumap_print_to_pagebuf(true, buf, &hv_gpci_cpumask);
103 }
104
105 /* Interface attribute array index to store system information */
106 #define INTERFACE_PROCESSOR_BUS_TOPOLOGY_ATTR   6
107 #define INTERFACE_PROCESSOR_CONFIG_ATTR         7
108 #define INTERFACE_AFFINITY_DOMAIN_VIA_VP_ATTR   8
109 #define INTERFACE_AFFINITY_DOMAIN_VIA_DOM_ATTR  9
110 #define INTERFACE_AFFINITY_DOMAIN_VIA_PAR_ATTR  10
111 #define INTERFACE_NULL_ATTR                     11
112
113 /* Counter request value to retrieve system information */
114 enum {
115         PROCESSOR_BUS_TOPOLOGY,
116         PROCESSOR_CONFIG,
117         AFFINITY_DOMAIN_VIA_VP, /* affinity domain via virtual processor */
118         AFFINITY_DOMAIN_VIA_DOM, /* affinity domain via domain */
119         AFFINITY_DOMAIN_VIA_PAR, /* affinity domain via partition */
120 };
121
122 static int sysinfo_counter_request[] = {
123         [PROCESSOR_BUS_TOPOLOGY] = 0xD0,
124         [PROCESSOR_CONFIG] = 0x90,
125         [AFFINITY_DOMAIN_VIA_VP] = 0xA0,
126         [AFFINITY_DOMAIN_VIA_DOM] = 0xB0,
127         [AFFINITY_DOMAIN_VIA_PAR] = 0xB1,
128 };
129
130 static DEFINE_PER_CPU(char, hv_gpci_reqb[HGPCI_REQ_BUFFER_SIZE]) __aligned(sizeof(uint64_t));
131
132 static unsigned long systeminfo_gpci_request(u32 req, u32 starting_index,
133                         u16 secondary_index, char *buf,
134                         size_t *n, struct hv_gpci_request_buffer *arg)
135 {
136         unsigned long ret;
137         size_t i, j;
138
139         arg->params.counter_request = cpu_to_be32(req);
140         arg->params.starting_index = cpu_to_be32(starting_index);
141         arg->params.secondary_index = cpu_to_be16(secondary_index);
142
143         ret = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO,
144                         virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE);
145
146         /*
147          * ret value as 'H_PARAMETER' corresponds to 'GEN_BUF_TOO_SMALL',
148          * which means that the current buffer size cannot accommodate
149          * all the information and a partial buffer returned.
150          * hcall fails incase of ret value other than H_SUCCESS or H_PARAMETER.
151          *
152          * ret value as H_AUTHORITY implies that partition is not permitted to retrieve
153          * performance information, and required to set
154          * "Enable Performance Information Collection" option.
155          */
156         if (ret == H_AUTHORITY)
157                 return -EPERM;
158
159         /*
160          * hcall can fail with other possible ret value like H_PRIVILEGE/H_HARDWARE
161          * because of invalid buffer-length/address or due to some hardware
162          * error.
163          */
164         if (ret && (ret != H_PARAMETER))
165                 return -EIO;
166
167         /*
168          * hcall H_GET_PERF_COUNTER_INFO populates the 'returned_values'
169          * to show the total number of counter_value array elements
170          * returned via hcall.
171          * hcall also populates 'cv_element_size' corresponds to individual
172          * counter_value array element size. Below loop go through all
173          * counter_value array elements as per their size and add it to
174          * the output buffer.
175          */
176         for (i = 0; i < be16_to_cpu(arg->params.returned_values); i++) {
177                 j = i * be16_to_cpu(arg->params.cv_element_size);
178
179                 for (; j < (i + 1) * be16_to_cpu(arg->params.cv_element_size); j++)
180                         *n += sprintf(buf + *n,  "%02x", (u8)arg->bytes[j]);
181                 *n += sprintf(buf + *n,  "\n");
182         }
183
184         if (*n >= PAGE_SIZE) {
185                 pr_info("System information exceeds PAGE_SIZE\n");
186                 return -EFBIG;
187         }
188
189         return ret;
190 }
191
192 static ssize_t processor_bus_topology_show(struct device *dev, struct device_attribute *attr,
193                                 char *buf)
194 {
195         struct hv_gpci_request_buffer *arg;
196         unsigned long ret;
197         size_t n = 0;
198
199         arg = (void *)get_cpu_var(hv_gpci_reqb);
200         memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
201
202         /*
203          * Pass the counter request value 0xD0 corresponds to request
204          * type 'Processor_bus_topology', to retrieve
205          * the system topology information.
206          * starting_index value implies the starting hardware
207          * chip id.
208          */
209         ret = systeminfo_gpci_request(sysinfo_counter_request[PROCESSOR_BUS_TOPOLOGY],
210                         0, 0, buf, &n, arg);
211
212         if (!ret)
213                 return n;
214
215         if (ret != H_PARAMETER)
216                 goto out;
217
218         /*
219          * ret value as 'H_PARAMETER' corresponds to 'GEN_BUF_TOO_SMALL', which
220          * implies that buffer can't accommodate all information, and a partial buffer
221          * returned. To handle that, we need to make subsequent requests
222          * with next starting index to retrieve additional (missing) data.
223          * Below loop do subsequent hcalls with next starting index and add it
224          * to buffer util we get all the information.
225          */
226         while (ret == H_PARAMETER) {
227                 int returned_values = be16_to_cpu(arg->params.returned_values);
228                 int elementsize = be16_to_cpu(arg->params.cv_element_size);
229                 int last_element = (returned_values - 1) * elementsize;
230
231                 /*
232                  * Since the starting index value is part of counter_value
233                  * buffer elements, use the starting index value in the last
234                  * element and add 1 to make subsequent hcalls.
235                  */
236                 u32 starting_index = arg->bytes[last_element + 3] +
237                                 (arg->bytes[last_element + 2] << 8) +
238                                 (arg->bytes[last_element + 1] << 16) +
239                                 (arg->bytes[last_element] << 24) + 1;
240
241                 memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
242
243                 ret = systeminfo_gpci_request(sysinfo_counter_request[PROCESSOR_BUS_TOPOLOGY],
244                                 starting_index, 0, buf, &n, arg);
245
246                 if (!ret)
247                         return n;
248
249                 if (ret != H_PARAMETER)
250                         goto out;
251         }
252
253         return n;
254
255 out:
256         put_cpu_var(hv_gpci_reqb);
257         return ret;
258 }
259
260 static ssize_t processor_config_show(struct device *dev, struct device_attribute *attr,
261                                         char *buf)
262 {
263         struct hv_gpci_request_buffer *arg;
264         unsigned long ret;
265         size_t n = 0;
266
267         arg = (void *)get_cpu_var(hv_gpci_reqb);
268         memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
269
270         /*
271          * Pass the counter request value 0x90 corresponds to request
272          * type 'Processor_config', to retrieve
273          * the system processor information.
274          * starting_index value implies the starting hardware
275          * processor index.
276          */
277         ret = systeminfo_gpci_request(sysinfo_counter_request[PROCESSOR_CONFIG],
278                         0, 0, buf, &n, arg);
279
280         if (!ret)
281                 return n;
282
283         if (ret != H_PARAMETER)
284                 goto out;
285
286         /*
287          * ret value as 'H_PARAMETER' corresponds to 'GEN_BUF_TOO_SMALL', which
288          * implies that buffer can't accommodate all information, and a partial buffer
289          * returned. To handle that, we need to take subsequent requests
290          * with next starting index to retrieve additional (missing) data.
291          * Below loop do subsequent hcalls with next starting index and add it
292          * to buffer util we get all the information.
293          */
294         while (ret == H_PARAMETER) {
295                 int returned_values = be16_to_cpu(arg->params.returned_values);
296                 int elementsize = be16_to_cpu(arg->params.cv_element_size);
297                 int last_element = (returned_values - 1) * elementsize;
298
299                 /*
300                  * Since the starting index is part of counter_value
301                  * buffer elements, use the starting index value in the last
302                  * element and add 1 to subsequent hcalls.
303                  */
304                 u32 starting_index = arg->bytes[last_element + 3] +
305                                 (arg->bytes[last_element + 2] << 8) +
306                                 (arg->bytes[last_element + 1] << 16) +
307                                 (arg->bytes[last_element] << 24) + 1;
308
309                 memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
310
311                 ret = systeminfo_gpci_request(sysinfo_counter_request[PROCESSOR_CONFIG],
312                                 starting_index, 0, buf, &n, arg);
313
314                 if (!ret)
315                         return n;
316
317                 if (ret != H_PARAMETER)
318                         goto out;
319         }
320
321         return n;
322
323 out:
324         put_cpu_var(hv_gpci_reqb);
325         return ret;
326 }
327
328 static ssize_t affinity_domain_via_virtual_processor_show(struct device *dev,
329                         struct device_attribute *attr, char *buf)
330 {
331         struct hv_gpci_request_buffer *arg;
332         unsigned long ret;
333         size_t n = 0;
334
335         arg = (void *)get_cpu_var(hv_gpci_reqb);
336         memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
337
338         /*
339          * Pass the counter request 0xA0 corresponds to request
340          * type 'Affinity_domain_information_by_virutal_processor',
341          * to retrieve the system affinity domain information.
342          * starting_index value refers to the starting hardware
343          * processor index.
344          */
345         ret = systeminfo_gpci_request(sysinfo_counter_request[AFFINITY_DOMAIN_VIA_VP],
346                         0, 0, buf, &n, arg);
347
348         if (!ret)
349                 return n;
350
351         if (ret != H_PARAMETER)
352                 goto out;
353
354         /*
355          * ret value as 'H_PARAMETER' corresponds to 'GEN_BUF_TOO_SMALL', which
356          * implies that buffer can't accommodate all information, and a partial buffer
357          * returned. To handle that, we need to take subsequent requests
358          * with next secondary index to retrieve additional (missing) data.
359          * Below loop do subsequent hcalls with next secondary index and add it
360          * to buffer util we get all the information.
361          */
362         while (ret == H_PARAMETER) {
363                 int returned_values = be16_to_cpu(arg->params.returned_values);
364                 int elementsize = be16_to_cpu(arg->params.cv_element_size);
365                 int last_element = (returned_values - 1) * elementsize;
366
367                 /*
368                  * Since the starting index and secondary index type is part of the
369                  * counter_value buffer elements, use the starting index value in the
370                  * last array element as subsequent starting index, and use secondary index
371                  * value in the last array element plus 1 as subsequent secondary index.
372                  * For counter request '0xA0', starting index points to partition id
373                  * and secondary index points to corresponding virtual processor index.
374                  */
375                 u32 starting_index = arg->bytes[last_element + 1] + (arg->bytes[last_element] << 8);
376                 u16 secondary_index = arg->bytes[last_element + 3] +
377                                 (arg->bytes[last_element + 2] << 8) + 1;
378
379                 memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
380
381                 ret = systeminfo_gpci_request(sysinfo_counter_request[AFFINITY_DOMAIN_VIA_VP],
382                                 starting_index, secondary_index, buf, &n, arg);
383
384                 if (!ret)
385                         return n;
386
387                 if (ret != H_PARAMETER)
388                         goto out;
389         }
390
391         return n;
392
393 out:
394         put_cpu_var(hv_gpci_reqb);
395         return ret;
396 }
397
398 static ssize_t affinity_domain_via_domain_show(struct device *dev, struct device_attribute *attr,
399                                                 char *buf)
400 {
401         struct hv_gpci_request_buffer *arg;
402         unsigned long ret;
403         size_t n = 0;
404
405         arg = (void *)get_cpu_var(hv_gpci_reqb);
406         memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
407
408         /*
409          * Pass the counter request 0xB0 corresponds to request
410          * type 'Affinity_domain_information_by_domain',
411          * to retrieve the system affinity domain information.
412          * starting_index value refers to the starting hardware
413          * processor index.
414          */
415         ret = systeminfo_gpci_request(sysinfo_counter_request[AFFINITY_DOMAIN_VIA_DOM],
416                         0, 0, buf, &n, arg);
417
418         if (!ret)
419                 return n;
420
421         if (ret != H_PARAMETER)
422                 goto out;
423
424         /*
425          * ret value as 'H_PARAMETER' corresponds to 'GEN_BUF_TOO_SMALL', which
426          * implies that buffer can't accommodate all information, and a partial buffer
427          * returned. To handle that, we need to take subsequent requests
428          * with next starting index to retrieve additional (missing) data.
429          * Below loop do subsequent hcalls with next starting index and add it
430          * to buffer util we get all the information.
431          */
432         while (ret == H_PARAMETER) {
433                 int returned_values = be16_to_cpu(arg->params.returned_values);
434                 int elementsize = be16_to_cpu(arg->params.cv_element_size);
435                 int last_element = (returned_values - 1) * elementsize;
436
437                 /*
438                  * Since the starting index value is part of counter_value
439                  * buffer elements, use the starting index value in the last
440                  * element and add 1 to make subsequent hcalls.
441                  */
442                 u32 starting_index = arg->bytes[last_element + 1] +
443                         (arg->bytes[last_element] << 8) + 1;
444
445                 memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
446
447                 ret = systeminfo_gpci_request(sysinfo_counter_request[AFFINITY_DOMAIN_VIA_DOM],
448                                         starting_index, 0, buf, &n, arg);
449
450                 if (!ret)
451                         return n;
452
453                 if (ret != H_PARAMETER)
454                         goto out;
455         }
456
457         return n;
458
459 out:
460         put_cpu_var(hv_gpci_reqb);
461         return ret;
462 }
463
464 static void affinity_domain_via_partition_result_parse(int returned_values,
465                         int element_size, char *buf, size_t *last_element,
466                         size_t *n, struct hv_gpci_request_buffer *arg)
467 {
468         size_t i = 0, j = 0;
469         size_t k, l, m;
470         uint16_t total_affinity_domain_ele, size_of_each_affinity_domain_ele;
471
472         /*
473          * hcall H_GET_PERF_COUNTER_INFO populates the 'returned_values'
474          * to show the total number of counter_value array elements
475          * returned via hcall.
476          * Unlike other request types, the data structure returned by this
477          * request is variable-size. For this counter request type,
478          * hcall populates 'cv_element_size' corresponds to minimum size of
479          * the structure returned i.e; the size of the structure with no domain
480          * information. Below loop go through all counter_value array
481          * to determine the number and size of each domain array element and
482          * add it to the output buffer.
483          */
484         while (i < returned_values) {
485                 k = j;
486                 for (; k < j + element_size; k++)
487                         *n += sprintf(buf + *n,  "%02x", (u8)arg->bytes[k]);
488                 *n += sprintf(buf + *n,  "\n");
489
490                 total_affinity_domain_ele = (u8)arg->bytes[k - 2] << 8 | (u8)arg->bytes[k - 3];
491                 size_of_each_affinity_domain_ele = (u8)arg->bytes[k] << 8 | (u8)arg->bytes[k - 1];
492
493                 for (l = 0; l < total_affinity_domain_ele; l++) {
494                         for (m = 0; m < size_of_each_affinity_domain_ele; m++) {
495                                 *n += sprintf(buf + *n,  "%02x", (u8)arg->bytes[k]);
496                                 k++;
497                         }
498                         *n += sprintf(buf + *n,  "\n");
499                 }
500
501                 *n += sprintf(buf + *n,  "\n");
502                 i++;
503                 j = k;
504         }
505
506         *last_element = k;
507 }
508
509 static ssize_t affinity_domain_via_partition_show(struct device *dev, struct device_attribute *attr,
510                                                         char *buf)
511 {
512         struct hv_gpci_request_buffer *arg;
513         unsigned long ret;
514         size_t n = 0;
515         size_t last_element = 0;
516         u32 starting_index;
517
518         arg = (void *)get_cpu_var(hv_gpci_reqb);
519         memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
520
521         /*
522          * Pass the counter request value 0xB1 corresponds to counter request
523          * type 'Affinity_domain_information_by_partition',
524          * to retrieve the system affinity domain by partition information.
525          * starting_index value refers to the starting hardware
526          * processor index.
527          */
528         arg->params.counter_request = cpu_to_be32(sysinfo_counter_request[AFFINITY_DOMAIN_VIA_PAR]);
529         arg->params.starting_index = cpu_to_be32(0);
530
531         ret = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO,
532                         virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE);
533
534         if (!ret)
535                 goto parse_result;
536
537         if (ret && (ret != H_PARAMETER))
538                 goto out;
539
540         /*
541          * ret value as 'H_PARAMETER' implies that the current buffer size
542          * can't accommodate all the information, and a partial buffer
543          * returned. To handle that, we need to make subsequent requests
544          * with next starting index to retrieve additional (missing) data.
545          * Below loop do subsequent hcalls with next starting index and add it
546          * to buffer util we get all the information.
547          */
548         while (ret == H_PARAMETER) {
549                 affinity_domain_via_partition_result_parse(
550                         be16_to_cpu(arg->params.returned_values) - 1,
551                         be16_to_cpu(arg->params.cv_element_size), buf,
552                         &last_element, &n, arg);
553
554                 if (n >= PAGE_SIZE) {
555                         put_cpu_var(hv_gpci_reqb);
556                         pr_debug("System information exceeds PAGE_SIZE\n");
557                         return -EFBIG;
558                 }
559
560                 /*
561                  * Since the starting index value is part of counter_value
562                  * buffer elements, use the starting_index value in the last
563                  * element and add 1 to make subsequent hcalls.
564                  */
565                 starting_index = (u8)arg->bytes[last_element] << 8 |
566                                 (u8)arg->bytes[last_element + 1];
567
568                 memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
569                 arg->params.counter_request = cpu_to_be32(
570                                 sysinfo_counter_request[AFFINITY_DOMAIN_VIA_PAR]);
571                 arg->params.starting_index = cpu_to_be32(starting_index);
572
573                 ret = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO,
574                                 virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE);
575
576                 if (ret && (ret != H_PARAMETER))
577                         goto out;
578         }
579
580 parse_result:
581         affinity_domain_via_partition_result_parse(
582                 be16_to_cpu(arg->params.returned_values),
583                 be16_to_cpu(arg->params.cv_element_size),
584                 buf, &last_element, &n, arg);
585
586         put_cpu_var(hv_gpci_reqb);
587         return n;
588
589 out:
590         put_cpu_var(hv_gpci_reqb);
591
592         /*
593          * ret value as 'H_PARAMETER' corresponds to 'GEN_BUF_TOO_SMALL',
594          * which means that the current buffer size cannot accommodate
595          * all the information and a partial buffer returned.
596          * hcall fails incase of ret value other than H_SUCCESS or H_PARAMETER.
597          *
598          * ret value as H_AUTHORITY implies that partition is not permitted to retrieve
599          * performance information, and required to set
600          * "Enable Performance Information Collection" option.
601          */
602         if (ret == H_AUTHORITY)
603                 return -EPERM;
604
605         /*
606          * hcall can fail with other possible ret value like H_PRIVILEGE/H_HARDWARE
607          * because of invalid buffer-length/address or due to some hardware
608          * error.
609          */
610         return -EIO;
611 }
612
613 static DEVICE_ATTR_RO(kernel_version);
614 static DEVICE_ATTR_RO(cpumask);
615
616 HV_CAPS_ATTR(version, "0x%x\n");
617 HV_CAPS_ATTR(ga, "%d\n");
618 HV_CAPS_ATTR(expanded, "%d\n");
619 HV_CAPS_ATTR(lab, "%d\n");
620 HV_CAPS_ATTR(collect_privileged, "%d\n");
621
622 static struct attribute *interface_attrs[] = {
623         &dev_attr_kernel_version.attr,
624         &hv_caps_attr_version.attr,
625         &hv_caps_attr_ga.attr,
626         &hv_caps_attr_expanded.attr,
627         &hv_caps_attr_lab.attr,
628         &hv_caps_attr_collect_privileged.attr,
629         /*
630          * This NULL is a placeholder for the processor_bus_topology
631          * attribute, set in init function if applicable.
632          */
633         NULL,
634         /*
635          * This NULL is a placeholder for the processor_config
636          * attribute, set in init function if applicable.
637          */
638         NULL,
639         /*
640          * This NULL is a placeholder for the affinity_domain_via_virtual_processor
641          * attribute, set in init function if applicable.
642          */
643         NULL,
644         /*
645          * This NULL is a placeholder for the affinity_domain_via_domain
646          * attribute, set in init function if applicable.
647          */
648         NULL,
649         /*
650          * This NULL is a placeholder for the affinity_domain_via_partition
651          * attribute, set in init function if applicable.
652          */
653         NULL,
654         NULL,
655 };
656
657 static struct attribute *cpumask_attrs[] = {
658         &dev_attr_cpumask.attr,
659         NULL,
660 };
661
662 static const struct attribute_group cpumask_attr_group = {
663         .attrs = cpumask_attrs,
664 };
665
666 static const struct attribute_group interface_group = {
667         .name = "interface",
668         .attrs = interface_attrs,
669 };
670
671 static const struct attribute_group *attr_groups[] = {
672         &format_group,
673         &event_group,
674         &interface_group,
675         &cpumask_attr_group,
676         NULL,
677 };
678
679 static unsigned long single_gpci_request(u32 req, u32 starting_index,
680                 u16 secondary_index, u8 version_in, u32 offset, u8 length,
681                 u64 *value)
682 {
683         unsigned long ret;
684         size_t i;
685         u64 count;
686         struct hv_gpci_request_buffer *arg;
687
688         arg = (void *)get_cpu_var(hv_gpci_reqb);
689         memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
690
691         arg->params.counter_request = cpu_to_be32(req);
692         arg->params.starting_index = cpu_to_be32(starting_index);
693         arg->params.secondary_index = cpu_to_be16(secondary_index);
694         arg->params.counter_info_version_in = version_in;
695
696         ret = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO,
697                         virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE);
698         if (ret) {
699                 pr_devel("hcall failed: 0x%lx\n", ret);
700                 goto out;
701         }
702
703         /*
704          * we verify offset and length are within the zeroed buffer at event
705          * init.
706          */
707         count = 0;
708         for (i = offset; i < offset + length; i++)
709                 count |= (u64)(arg->bytes[i]) << ((length - 1 - (i - offset)) * 8);
710
711         *value = count;
712 out:
713         put_cpu_var(hv_gpci_reqb);
714         return ret;
715 }
716
717 static u64 h_gpci_get_value(struct perf_event *event)
718 {
719         u64 count;
720         unsigned long ret = single_gpci_request(event_get_request(event),
721                                         event_get_starting_index(event),
722                                         event_get_secondary_index(event),
723                                         event_get_counter_info_version(event),
724                                         event_get_offset(event),
725                                         event_get_length(event),
726                                         &count);
727         if (ret)
728                 return 0;
729         return count;
730 }
731
732 static void h_gpci_event_update(struct perf_event *event)
733 {
734         s64 prev;
735         u64 now = h_gpci_get_value(event);
736         prev = local64_xchg(&event->hw.prev_count, now);
737         local64_add(now - prev, &event->count);
738 }
739
740 static void h_gpci_event_start(struct perf_event *event, int flags)
741 {
742         local64_set(&event->hw.prev_count, h_gpci_get_value(event));
743 }
744
745 static void h_gpci_event_stop(struct perf_event *event, int flags)
746 {
747         h_gpci_event_update(event);
748 }
749
750 static int h_gpci_event_add(struct perf_event *event, int flags)
751 {
752         if (flags & PERF_EF_START)
753                 h_gpci_event_start(event, flags);
754
755         return 0;
756 }
757
758 static int h_gpci_event_init(struct perf_event *event)
759 {
760         u64 count;
761         u8 length;
762
763         /* Not our event */
764         if (event->attr.type != event->pmu->type)
765                 return -ENOENT;
766
767         /* config2 is unused */
768         if (event->attr.config2) {
769                 pr_devel("config2 set when reserved\n");
770                 return -EINVAL;
771         }
772
773         /* no branch sampling */
774         if (has_branch_stack(event))
775                 return -EOPNOTSUPP;
776
777         length = event_get_length(event);
778         if (length < 1 || length > 8) {
779                 pr_devel("length invalid\n");
780                 return -EINVAL;
781         }
782
783         /* last byte within the buffer? */
784         if ((event_get_offset(event) + length) > HGPCI_MAX_DATA_BYTES) {
785                 pr_devel("request outside of buffer: %zu > %zu\n",
786                                 (size_t)event_get_offset(event) + length,
787                                 HGPCI_MAX_DATA_BYTES);
788                 return -EINVAL;
789         }
790
791         /* check if the request works... */
792         if (single_gpci_request(event_get_request(event),
793                                 event_get_starting_index(event),
794                                 event_get_secondary_index(event),
795                                 event_get_counter_info_version(event),
796                                 event_get_offset(event),
797                                 length,
798                                 &count)) {
799                 pr_devel("gpci hcall failed\n");
800                 return -EINVAL;
801         }
802
803         return 0;
804 }
805
806 static struct pmu h_gpci_pmu = {
807         .task_ctx_nr = perf_invalid_context,
808
809         .name = "hv_gpci",
810         .attr_groups = attr_groups,
811         .event_init  = h_gpci_event_init,
812         .add         = h_gpci_event_add,
813         .del         = h_gpci_event_stop,
814         .start       = h_gpci_event_start,
815         .stop        = h_gpci_event_stop,
816         .read        = h_gpci_event_update,
817         .capabilities = PERF_PMU_CAP_NO_EXCLUDE,
818 };
819
820 static int ppc_hv_gpci_cpu_online(unsigned int cpu)
821 {
822         if (cpumask_empty(&hv_gpci_cpumask))
823                 cpumask_set_cpu(cpu, &hv_gpci_cpumask);
824
825         return 0;
826 }
827
828 static int ppc_hv_gpci_cpu_offline(unsigned int cpu)
829 {
830         int target;
831
832         /* Check if exiting cpu is used for collecting gpci events */
833         if (!cpumask_test_and_clear_cpu(cpu, &hv_gpci_cpumask))
834                 return 0;
835
836         /* Find a new cpu to collect gpci events */
837         target = cpumask_last(cpu_active_mask);
838
839         if (target < 0 || target >= nr_cpu_ids) {
840                 pr_err("hv_gpci: CPU hotplug init failed\n");
841                 return -1;
842         }
843
844         /* Migrate gpci events to the new target */
845         cpumask_set_cpu(target, &hv_gpci_cpumask);
846         perf_pmu_migrate_context(&h_gpci_pmu, cpu, target);
847
848         return 0;
849 }
850
851 static int hv_gpci_cpu_hotplug_init(void)
852 {
853         return cpuhp_setup_state(CPUHP_AP_PERF_POWERPC_HV_GPCI_ONLINE,
854                           "perf/powerpc/hv_gcpi:online",
855                           ppc_hv_gpci_cpu_online,
856                           ppc_hv_gpci_cpu_offline);
857 }
858
859 static struct device_attribute *sysinfo_device_attr_create(int
860                 sysinfo_interface_group_index, u32 req)
861 {
862         struct device_attribute *attr = NULL;
863         unsigned long ret;
864         struct hv_gpci_request_buffer *arg;
865
866         if (sysinfo_interface_group_index < INTERFACE_PROCESSOR_BUS_TOPOLOGY_ATTR ||
867                         sysinfo_interface_group_index >= INTERFACE_NULL_ATTR) {
868                 pr_info("Wrong interface group index for system information\n");
869                 return NULL;
870         }
871
872         /* Check for given counter request value support */
873         arg = (void *)get_cpu_var(hv_gpci_reqb);
874         memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
875
876         arg->params.counter_request = cpu_to_be32(req);
877
878         ret = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO,
879                         virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE);
880
881         put_cpu_var(hv_gpci_reqb);
882
883         /*
884          * Add given counter request value attribute in the interface_attrs
885          * attribute array, only for valid return types.
886          */
887         if (!ret || ret == H_AUTHORITY || ret == H_PARAMETER) {
888                 attr = kzalloc(sizeof(*attr), GFP_KERNEL);
889                 if (!attr)
890                         return NULL;
891
892                 sysfs_attr_init(&attr->attr);
893                 attr->attr.mode = 0444;
894
895                 switch (sysinfo_interface_group_index) {
896                 case INTERFACE_PROCESSOR_BUS_TOPOLOGY_ATTR:
897                         attr->attr.name = "processor_bus_topology";
898                         attr->show = processor_bus_topology_show;
899                 break;
900                 case INTERFACE_PROCESSOR_CONFIG_ATTR:
901                         attr->attr.name = "processor_config";
902                         attr->show = processor_config_show;
903                 break;
904                 case INTERFACE_AFFINITY_DOMAIN_VIA_VP_ATTR:
905                         attr->attr.name = "affinity_domain_via_virtual_processor";
906                         attr->show = affinity_domain_via_virtual_processor_show;
907                 break;
908                 case INTERFACE_AFFINITY_DOMAIN_VIA_DOM_ATTR:
909                         attr->attr.name = "affinity_domain_via_domain";
910                         attr->show = affinity_domain_via_domain_show;
911                 break;
912                 case INTERFACE_AFFINITY_DOMAIN_VIA_PAR_ATTR:
913                         attr->attr.name = "affinity_domain_via_partition";
914                         attr->show = affinity_domain_via_partition_show;
915                 break;
916                 }
917         } else
918                 pr_devel("hcall failed, with error: 0x%lx\n", ret);
919
920         return attr;
921 }
922
923 static void add_sysinfo_interface_files(void)
924 {
925         int sysfs_count;
926         struct device_attribute *attr[INTERFACE_NULL_ATTR - INTERFACE_PROCESSOR_BUS_TOPOLOGY_ATTR];
927         int i;
928
929         sysfs_count = INTERFACE_NULL_ATTR - INTERFACE_PROCESSOR_BUS_TOPOLOGY_ATTR;
930
931         /* Get device attribute for a given counter request value */
932         for (i = 0; i < sysfs_count; i++) {
933                 attr[i] = sysinfo_device_attr_create(i + INTERFACE_PROCESSOR_BUS_TOPOLOGY_ATTR,
934                                 sysinfo_counter_request[i]);
935
936                 if (!attr[i])
937                         goto out;
938         }
939
940         /* Add sysinfo interface attributes in the interface_attrs attribute array */
941         for (i = 0; i < sysfs_count; i++)
942                 interface_attrs[i + INTERFACE_PROCESSOR_BUS_TOPOLOGY_ATTR] = &attr[i]->attr;
943
944         return;
945
946 out:
947         /*
948          * The sysinfo interface attributes will be added, only if hcall passed for
949          * all the counter request values. Free the device attribute array incase
950          * of any hcall failure.
951          */
952         if (i > 0) {
953                 while (i >= 0) {
954                         kfree(attr[i]);
955                         i--;
956                 }
957         }
958 }
959
960 static int hv_gpci_init(void)
961 {
962         int r;
963         unsigned long hret;
964         struct hv_perf_caps caps;
965         struct hv_gpci_request_buffer *arg;
966
967         hv_gpci_assert_offsets_correct();
968
969         if (!firmware_has_feature(FW_FEATURE_LPAR)) {
970                 pr_debug("not a virtualized system, not enabling\n");
971                 return -ENODEV;
972         }
973
974         hret = hv_perf_caps_get(&caps);
975         if (hret) {
976                 pr_debug("could not obtain capabilities, not enabling, rc=%ld\n",
977                                 hret);
978                 return -ENODEV;
979         }
980
981         /* init cpuhotplug */
982         r = hv_gpci_cpu_hotplug_init();
983         if (r)
984                 return r;
985
986         /* sampling not supported */
987         h_gpci_pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
988
989         arg = (void *)get_cpu_var(hv_gpci_reqb);
990         memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
991
992         /*
993          * hcall H_GET_PERF_COUNTER_INFO populates the output
994          * counter_info_version value based on the system hypervisor.
995          * Pass the counter request 0x10 corresponds to request type
996          * 'Dispatch_timebase_by_processor', to get the supported
997          * counter_info_version.
998          */
999         arg->params.counter_request = cpu_to_be32(0x10);
1000
1001         r = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO,
1002                         virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE);
1003         if (r) {
1004                 pr_devel("hcall failed, can't get supported counter_info_version: 0x%x\n", r);
1005                 arg->params.counter_info_version_out = 0x8;
1006         }
1007
1008         /*
1009          * Use counter_info_version_out value to assign
1010          * required hv-gpci event list.
1011          */
1012         if (arg->params.counter_info_version_out >= 0x8)
1013                 event_group.attrs = hv_gpci_event_attrs;
1014         else
1015                 event_group.attrs = hv_gpci_event_attrs_v6;
1016
1017         put_cpu_var(hv_gpci_reqb);
1018
1019         r = perf_pmu_register(&h_gpci_pmu, h_gpci_pmu.name, -1);
1020         if (r)
1021                 return r;
1022
1023         /* sysinfo interface files are only available for power10 and above platforms */
1024         if (PVR_VER(mfspr(SPRN_PVR)) >= PVR_POWER10)
1025                 add_sysinfo_interface_files();
1026
1027         return 0;
1028 }
1029
1030 device_initcall(hv_gpci_init);