arch/powerpc/kernel/security.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 //
   3 // Security related flags and so on.
   4 //
   5 // Copyright 2018, Michael Ellerman, IBM Corporation.
   6
   7 #include <linux/cpu.h>
   8 #include <linux/kernel.h>
   9 #include <linux/device.h>
  10 #include <linux/memblock.h>
  11 #include <linux/nospec.h>
  12 #include <linux/prctl.h>
  13 #include <linux/seq_buf.h>
  14 #include <linux/debugfs.h>
  15
  16 #include <asm/asm-prototypes.h>
  17 #include <asm/code-patching.h>
  18 #include <asm/security_features.h>
  19 #include <asm/sections.h>
  20 #include <asm/setup.h>
  21 #include <asm/inst.h>
  22
  23 #include "setup.h"
  24
  25 u64 powerpc_security_features __read_mostly = SEC_FTR_DEFAULT;
  26
  27 enum branch_cache_flush_type {
  28         BRANCH_CACHE_FLUSH_NONE = 0x1,
  29         BRANCH_CACHE_FLUSH_SW   = 0x2,
  30         BRANCH_CACHE_FLUSH_HW   = 0x4,
  31 };
  32 static enum branch_cache_flush_type count_cache_flush_type = BRANCH_CACHE_FLUSH_NONE;
  33 static enum branch_cache_flush_type link_stack_flush_type = BRANCH_CACHE_FLUSH_NONE;
  34
  35 bool barrier_nospec_enabled;
  36 static bool no_nospec;
  37 static bool btb_flush_enabled;
  38 #if defined(CONFIG_PPC_E500) || defined(CONFIG_PPC_BOOK3S_64)
  39 static bool no_spectrev2;
  40 #endif
  41
  42 static void enable_barrier_nospec(bool enable)
  43 {
  44         barrier_nospec_enabled = enable;
  45         do_barrier_nospec_fixups(enable);
  46 }
  47
  48 void __init setup_barrier_nospec(void)
  49 {
  50         bool enable;
  51
  52         /*
  53          * It would make sense to check SEC_FTR_SPEC_BAR_ORI31 below as well.
  54          * But there's a good reason not to. The two flags we check below are
  55          * both are enabled by default in the kernel, so if the hcall is not
  56          * functional they will be enabled.
  57          * On a system where the host firmware has been updated (so the ori
  58          * functions as a barrier), but on which the hypervisor (KVM/Qemu) has
  59          * not been updated, we would like to enable the barrier. Dropping the
  60          * check for SEC_FTR_SPEC_BAR_ORI31 achieves that. The only downside is
  61          * we potentially enable the barrier on systems where the host firmware
  62          * is not updated, but that's harmless as it's a no-op.
  63          */
  64         enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
  65                  security_ftr_enabled(SEC_FTR_BNDS_CHK_SPEC_BAR);
  66
  67         if (!no_nospec && !cpu_mitigations_off())
  68                 enable_barrier_nospec(enable);
  69 }
  70
  71 static int __init handle_nospectre_v1(char *p)
  72 {
  73         no_nospec = true;
  74
  75         return 0;
  76 }
  77 early_param("nospectre_v1", handle_nospectre_v1);
  78
  79 #ifdef CONFIG_DEBUG_FS
  80 static int barrier_nospec_set(void *data, u64 val)
  81 {
  82         switch (val) {
  83         case 0:
  84         case 1:
  85                 break;
  86         default:
  87                 return -EINVAL;
  88         }
  89
  90         if (!!val == !!barrier_nospec_enabled)
  91                 return 0;
  92
  93         enable_barrier_nospec(!!val);
  94
  95         return 0;
  96 }
  97
  98 static int barrier_nospec_get(void *data, u64 *val)
  99 {
 100         *val = barrier_nospec_enabled ? 1 : 0;
 101         return 0;
 102 }
 103
 104 DEFINE_DEBUGFS_ATTRIBUTE(fops_barrier_nospec, barrier_nospec_get,
 105                          barrier_nospec_set, "%llu\n");
 106
 107 static __init int barrier_nospec_debugfs_init(void)
 108 {
 109         debugfs_create_file_unsafe("barrier_nospec", 0600,
 110                                    arch_debugfs_dir, NULL,
 111                                    &fops_barrier_nospec);
 112         return 0;
 113 }
 114 device_initcall(barrier_nospec_debugfs_init);
 115
 116 static __init int security_feature_debugfs_init(void)
 117 {
 118         debugfs_create_x64("security_features", 0400, arch_debugfs_dir,
 119                            &powerpc_security_features);
 120         return 0;
 121 }
 122 device_initcall(security_feature_debugfs_init);
 123 #endif /* CONFIG_DEBUG_FS */
 124
 125 #if defined(CONFIG_PPC_E500) || defined(CONFIG_PPC_BOOK3S_64)
 126 static int __init handle_nospectre_v2(char *p)
 127 {
 128         no_spectrev2 = true;
 129
 130         return 0;
 131 }
 132 early_param("nospectre_v2", handle_nospectre_v2);
 133 #endif /* CONFIG_PPC_E500 || CONFIG_PPC_BOOK3S_64 */
 134
 135 #ifdef CONFIG_PPC_E500
 136 void __init setup_spectre_v2(void)
 137 {
 138         if (no_spectrev2 || cpu_mitigations_off())
 139                 do_btb_flush_fixups();
 140         else
 141                 btb_flush_enabled = true;
 142 }
 143 #endif /* CONFIG_PPC_E500 */
 144
 145 #ifdef CONFIG_PPC_BOOK3S_64
 146 ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, char *buf)
 147 {
 148         bool thread_priv;
 149
 150         thread_priv = security_ftr_enabled(SEC_FTR_L1D_THREAD_PRIV);
 151
 152         if (rfi_flush) {
 153                 struct seq_buf s;
 154                 seq_buf_init(&s, buf, PAGE_SIZE - 1);
 155
 156                 seq_buf_printf(&s, "Mitigation: RFI Flush");
 157                 if (thread_priv)
 158                         seq_buf_printf(&s, ", L1D private per thread");
 159
 160                 seq_buf_printf(&s, "\n");
 161
 162                 return s.len;
 163         }
 164
 165         if (thread_priv)
 166                 return sprintf(buf, "Vulnerable: L1D private per thread\n");
 167
 168         if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) &&
 169             !security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR))
 170                 return sprintf(buf, "Not affected\n");
 171
 172         return sprintf(buf, "Vulnerable\n");
 173 }
 174
 175 ssize_t cpu_show_l1tf(struct device *dev, struct device_attribute *attr, char *buf)
 176 {
 177         return cpu_show_meltdown(dev, attr, buf);
 178 }
 179 #endif
 180
 181 ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr, char *buf)
 182 {
 183         struct seq_buf s;
 184
 185         seq_buf_init(&s, buf, PAGE_SIZE - 1);
 186
 187         if (security_ftr_enabled(SEC_FTR_BNDS_CHK_SPEC_BAR)) {
 188                 if (barrier_nospec_enabled)
 189                         seq_buf_printf(&s, "Mitigation: __user pointer sanitization");
 190                 else
 191                         seq_buf_printf(&s, "Vulnerable");
 192
 193                 if (security_ftr_enabled(SEC_FTR_SPEC_BAR_ORI31))
 194                         seq_buf_printf(&s, ", ori31 speculation barrier enabled");
 195
 196                 seq_buf_printf(&s, "\n");
 197         } else
 198                 seq_buf_printf(&s, "Not affected\n");
 199
 200         return s.len;
 201 }
 202
 203 ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr, char *buf)
 204 {
 205         struct seq_buf s;
 206         bool bcs, ccd;
 207
 208         seq_buf_init(&s, buf, PAGE_SIZE - 1);
 209
 210         bcs = security_ftr_enabled(SEC_FTR_BCCTRL_SERIALISED);
 211         ccd = security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED);
 212
 213         if (bcs || ccd) {
 214                 seq_buf_printf(&s, "Mitigation: ");
 215
 216                 if (bcs)
 217                         seq_buf_printf(&s, "Indirect branch serialisation (kernel only)");
 218
 219                 if (bcs && ccd)
 220                         seq_buf_printf(&s, ", ");
 221
 222                 if (ccd)
 223                         seq_buf_printf(&s, "Indirect branch cache disabled");
 224
 225         } else if (count_cache_flush_type != BRANCH_CACHE_FLUSH_NONE) {
 226                 seq_buf_printf(&s, "Mitigation: Software count cache flush");
 227
 228                 if (count_cache_flush_type == BRANCH_CACHE_FLUSH_HW)
 229                         seq_buf_printf(&s, " (hardware accelerated)");
 230
 231         } else if (btb_flush_enabled) {
 232                 seq_buf_printf(&s, "Mitigation: Branch predictor state flush");
 233         } else {
 234                 seq_buf_printf(&s, "Vulnerable");
 235         }
 236
 237         if (bcs || ccd || count_cache_flush_type != BRANCH_CACHE_FLUSH_NONE) {
 238                 if (link_stack_flush_type != BRANCH_CACHE_FLUSH_NONE)
 239                         seq_buf_printf(&s, ", Software link stack flush");
 240                 if (link_stack_flush_type == BRANCH_CACHE_FLUSH_HW)
 241                         seq_buf_printf(&s, " (hardware accelerated)");
 242         }
 243
 244         seq_buf_printf(&s, "\n");
 245
 246         return s.len;
 247 }
 248
 249 #ifdef CONFIG_PPC_BOOK3S_64
 250 /*
 251  * Store-forwarding barrier support.
 252  */
 253
 254 static enum stf_barrier_type stf_enabled_flush_types;
 255 static bool no_stf_barrier;
 256 static bool stf_barrier;
 257
 258 static int __init handle_no_stf_barrier(char *p)
 259 {
 260         pr_info("stf-barrier: disabled on command line.");
 261         no_stf_barrier = true;
 262         return 0;
 263 }
 264
 265 early_param("no_stf_barrier", handle_no_stf_barrier);
 266
 267 enum stf_barrier_type stf_barrier_type_get(void)
 268 {
 269         return stf_enabled_flush_types;
 270 }
 271
 272 /* This is the generic flag used by other architectures */
 273 static int __init handle_ssbd(char *p)
 274 {
 275         if (!p || strncmp(p, "auto", 5) == 0 || strncmp(p, "on", 2) == 0 ) {
 276                 /* Until firmware tells us, we have the barrier with auto */
 277                 return 0;
 278         } else if (strncmp(p, "off", 3) == 0) {
 279                 handle_no_stf_barrier(NULL);
 280                 return 0;
 281         } else
 282                 return 1;
 283
 284         return 0;
 285 }
 286 early_param("spec_store_bypass_disable", handle_ssbd);
 287
 288 /* This is the generic flag used by other architectures */
 289 static int __init handle_no_ssbd(char *p)
 290 {
 291         handle_no_stf_barrier(NULL);
 292         return 0;
 293 }
 294 early_param("nospec_store_bypass_disable", handle_no_ssbd);
 295
 296 static void stf_barrier_enable(bool enable)
 297 {
 298         if (enable)
 299                 do_stf_barrier_fixups(stf_enabled_flush_types);
 300         else
 301                 do_stf_barrier_fixups(STF_BARRIER_NONE);
 302
 303         stf_barrier = enable;
 304 }
 305
 306 void setup_stf_barrier(void)
 307 {
 308         enum stf_barrier_type type;
 309         bool enable;
 310
 311         /* Default to fallback in case fw-features are not available */
 312         if (cpu_has_feature(CPU_FTR_ARCH_300))
 313                 type = STF_BARRIER_EIEIO;
 314         else if (cpu_has_feature(CPU_FTR_ARCH_207S))
 315                 type = STF_BARRIER_SYNC_ORI;
 316         else if (cpu_has_feature(CPU_FTR_ARCH_206))
 317                 type = STF_BARRIER_FALLBACK;
 318         else
 319                 type = STF_BARRIER_NONE;
 320
 321         enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
 322                  security_ftr_enabled(SEC_FTR_STF_BARRIER);
 323
 324         if (type == STF_BARRIER_FALLBACK) {
 325                 pr_info("stf-barrier: fallback barrier available\n");
 326         } else if (type == STF_BARRIER_SYNC_ORI) {
 327                 pr_info("stf-barrier: hwsync barrier available\n");
 328         } else if (type == STF_BARRIER_EIEIO) {
 329                 pr_info("stf-barrier: eieio barrier available\n");
 330         }
 331
 332         stf_enabled_flush_types = type;
 333
 334         if (!no_stf_barrier && !cpu_mitigations_off())
 335                 stf_barrier_enable(enable);
 336 }
 337
 338 ssize_t cpu_show_spec_store_bypass(struct device *dev, struct device_attribute *attr, char *buf)
 339 {
 340         if (stf_barrier && stf_enabled_flush_types != STF_BARRIER_NONE) {
 341                 const char *type;
 342                 switch (stf_enabled_flush_types) {
 343                 case STF_BARRIER_EIEIO:
 344                         type = "eieio";
 345                         break;
 346                 case STF_BARRIER_SYNC_ORI:
 347                         type = "hwsync";
 348                         break;
 349                 case STF_BARRIER_FALLBACK:
 350                         type = "fallback";
 351                         break;
 352                 default:
 353                         type = "unknown";
 354                 }
 355                 return sprintf(buf, "Mitigation: Kernel entry/exit barrier (%s)\n", type);
 356         }
 357
 358         if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) &&
 359             !security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR))
 360                 return sprintf(buf, "Not affected\n");
 361
 362         return sprintf(buf, "Vulnerable\n");
 363 }
 364
 365 static int ssb_prctl_get(struct task_struct *task)
 366 {
 367         /*
 368          * The STF_BARRIER feature is on by default, so if it's off that means
 369          * firmware has explicitly said the CPU is not vulnerable via either
 370          * the hypercall or device tree.
 371          */
 372         if (!security_ftr_enabled(SEC_FTR_STF_BARRIER))
 373                 return PR_SPEC_NOT_AFFECTED;
 374
 375         /*
 376          * If the system's CPU has no known barrier (see setup_stf_barrier())
 377          * then assume that the CPU is not vulnerable.
 378          */
 379         if (stf_enabled_flush_types == STF_BARRIER_NONE)
 380                 return PR_SPEC_NOT_AFFECTED;
 381
 382         /*
 383          * Otherwise the CPU is vulnerable. The barrier is not a global or
 384          * per-process mitigation, so the only value that can be reported here
 385          * is PR_SPEC_ENABLE, which appears as "vulnerable" in /proc.
 386          */
 387         return PR_SPEC_ENABLE;
 388 }
 389
 390 int arch_prctl_spec_ctrl_get(struct task_struct *task, unsigned long which)
 391 {
 392         switch (which) {
 393         case PR_SPEC_STORE_BYPASS:
 394                 return ssb_prctl_get(task);
 395         default:
 396                 return -ENODEV;
 397         }
 398 }
 399
 400 #ifdef CONFIG_DEBUG_FS
 401 static int stf_barrier_set(void *data, u64 val)
 402 {
 403         bool enable;
 404
 405         if (val == 1)
 406                 enable = true;
 407         else if (val == 0)
 408                 enable = false;
 409         else
 410                 return -EINVAL;
 411
 412         /* Only do anything if we're changing state */
 413         if (enable != stf_barrier)
 414                 stf_barrier_enable(enable);
 415
 416         return 0;
 417 }
 418
 419 static int stf_barrier_get(void *data, u64 *val)
 420 {
 421         *val = stf_barrier ? 1 : 0;
 422         return 0;
 423 }
 424
 425 DEFINE_DEBUGFS_ATTRIBUTE(fops_stf_barrier, stf_barrier_get, stf_barrier_set,
 426                          "%llu\n");
 427
 428 static __init int stf_barrier_debugfs_init(void)
 429 {
 430         debugfs_create_file_unsafe("stf_barrier", 0600, arch_debugfs_dir,
 431                                    NULL, &fops_stf_barrier);
 432         return 0;
 433 }
 434 device_initcall(stf_barrier_debugfs_init);
 435 #endif /* CONFIG_DEBUG_FS */
 436
 437 static void update_branch_cache_flush(void)
 438 {
 439         u32 *site, __maybe_unused *site2;
 440
 441 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
 442         site = &patch__call_kvm_flush_link_stack;
 443         site2 = &patch__call_kvm_flush_link_stack_p9;
 444         // This controls the branch from guest_exit_cont to kvm_flush_link_stack
 445         if (link_stack_flush_type == BRANCH_CACHE_FLUSH_NONE) {
 446                 patch_instruction_site(site, ppc_inst(PPC_RAW_NOP()));
 447                 patch_instruction_site(site2, ppc_inst(PPC_RAW_NOP()));
 448         } else {
 449                 // Could use HW flush, but that could also flush count cache
 450                 patch_branch_site(site, (u64)&kvm_flush_link_stack, BRANCH_SET_LINK);
 451                 patch_branch_site(site2, (u64)&kvm_flush_link_stack, BRANCH_SET_LINK);
 452         }
 453 #endif
 454
 455         // Patch out the bcctr first, then nop the rest
 456         site = &patch__call_flush_branch_caches3;
 457         patch_instruction_site(site, ppc_inst(PPC_RAW_NOP()));
 458         site = &patch__call_flush_branch_caches2;
 459         patch_instruction_site(site, ppc_inst(PPC_RAW_NOP()));
 460         site = &patch__call_flush_branch_caches1;
 461         patch_instruction_site(site, ppc_inst(PPC_RAW_NOP()));
 462
 463         // This controls the branch from _switch to flush_branch_caches
 464         if (count_cache_flush_type == BRANCH_CACHE_FLUSH_NONE &&
 465             link_stack_flush_type == BRANCH_CACHE_FLUSH_NONE) {
 466                 // Nothing to be done
 467
 468         } else if (count_cache_flush_type == BRANCH_CACHE_FLUSH_HW &&
 469                    link_stack_flush_type == BRANCH_CACHE_FLUSH_HW) {
 470                 // Patch in the bcctr last
 471                 site = &patch__call_flush_branch_caches1;
 472                 patch_instruction_site(site, ppc_inst(0x39207fff)); // li r9,0x7fff
 473                 site = &patch__call_flush_branch_caches2;
 474                 patch_instruction_site(site, ppc_inst(0x7d2903a6)); // mtctr r9
 475                 site = &patch__call_flush_branch_caches3;
 476                 patch_instruction_site(site, ppc_inst(PPC_INST_BCCTR_FLUSH));
 477
 478         } else {
 479                 patch_branch_site(site, (u64)&flush_branch_caches, BRANCH_SET_LINK);
 480
 481                 // If we just need to flush the link stack, early return
 482                 if (count_cache_flush_type == BRANCH_CACHE_FLUSH_NONE) {
 483                         patch_instruction_site(&patch__flush_link_stack_return,
 484                                                ppc_inst(PPC_RAW_BLR()));
 485
 486                 // If we have flush instruction, early return
 487                 } else if (count_cache_flush_type == BRANCH_CACHE_FLUSH_HW) {
 488                         patch_instruction_site(&patch__flush_count_cache_return,
 489                                                ppc_inst(PPC_RAW_BLR()));
 490                 }
 491         }
 492 }
 493
 494 static void toggle_branch_cache_flush(bool enable)
 495 {
 496         if (!enable || !security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE)) {
 497                 if (count_cache_flush_type != BRANCH_CACHE_FLUSH_NONE)
 498                         count_cache_flush_type = BRANCH_CACHE_FLUSH_NONE;
 499
 500                 pr_info("count-cache-flush: flush disabled.\n");
 501         } else {
 502                 if (security_ftr_enabled(SEC_FTR_BCCTR_FLUSH_ASSIST)) {
 503                         count_cache_flush_type = BRANCH_CACHE_FLUSH_HW;
 504                         pr_info("count-cache-flush: hardware flush enabled.\n");
 505                 } else {
 506                         count_cache_flush_type = BRANCH_CACHE_FLUSH_SW;
 507                         pr_info("count-cache-flush: software flush enabled.\n");
 508                 }
 509         }
 510
 511         if (!enable || !security_ftr_enabled(SEC_FTR_FLUSH_LINK_STACK)) {
 512                 if (link_stack_flush_type != BRANCH_CACHE_FLUSH_NONE)
 513                         link_stack_flush_type = BRANCH_CACHE_FLUSH_NONE;
 514
 515                 pr_info("link-stack-flush: flush disabled.\n");
 516         } else {
 517                 if (security_ftr_enabled(SEC_FTR_BCCTR_LINK_FLUSH_ASSIST)) {
 518                         link_stack_flush_type = BRANCH_CACHE_FLUSH_HW;
 519                         pr_info("link-stack-flush: hardware flush enabled.\n");
 520                 } else {
 521                         link_stack_flush_type = BRANCH_CACHE_FLUSH_SW;
 522                         pr_info("link-stack-flush: software flush enabled.\n");
 523                 }
 524         }
 525
 526         update_branch_cache_flush();
 527 }
 528
 529 void setup_count_cache_flush(void)
 530 {
 531         bool enable = true;
 532
 533         if (no_spectrev2 || cpu_mitigations_off()) {
 534                 if (security_ftr_enabled(SEC_FTR_BCCTRL_SERIALISED) ||
 535                     security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED))
 536                         pr_warn("Spectre v2 mitigations not fully under software control, can't disable\n");
 537
 538                 enable = false;
 539         }
 540
 541         /*
 542          * There's no firmware feature flag/hypervisor bit to tell us we need to
 543          * flush the link stack on context switch. So we set it here if we see
 544          * either of the Spectre v2 mitigations that aim to protect userspace.
 545          */
 546         if (security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED) ||
 547             security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE))
 548                 security_ftr_set(SEC_FTR_FLUSH_LINK_STACK);
 549
 550         toggle_branch_cache_flush(enable);
 551 }
 552
 553 static enum l1d_flush_type enabled_flush_types;
 554 static void *l1d_flush_fallback_area;
 555 static bool no_rfi_flush;
 556 static bool no_entry_flush;
 557 static bool no_uaccess_flush;
 558 bool rfi_flush;
 559 static bool entry_flush;
 560 static bool uaccess_flush;
 561 DEFINE_STATIC_KEY_FALSE(uaccess_flush_key);
 562 EXPORT_SYMBOL(uaccess_flush_key);
 563
 564 static int __init handle_no_rfi_flush(char *p)
 565 {
 566         pr_info("rfi-flush: disabled on command line.");
 567         no_rfi_flush = true;
 568         return 0;
 569 }
 570 early_param("no_rfi_flush", handle_no_rfi_flush);
 571
 572 static int __init handle_no_entry_flush(char *p)
 573 {
 574         pr_info("entry-flush: disabled on command line.");
 575         no_entry_flush = true;
 576         return 0;
 577 }
 578 early_param("no_entry_flush", handle_no_entry_flush);
 579
 580 static int __init handle_no_uaccess_flush(char *p)
 581 {
 582         pr_info("uaccess-flush: disabled on command line.");
 583         no_uaccess_flush = true;
 584         return 0;
 585 }
 586 early_param("no_uaccess_flush", handle_no_uaccess_flush);
 587
 588 /*
 589  * The RFI flush is not KPTI, but because users will see doco that says to use
 590  * nopti we hijack that option here to also disable the RFI flush.
 591  */
 592 static int __init handle_no_pti(char *p)
 593 {
 594         pr_info("rfi-flush: disabling due to 'nopti' on command line.\n");
 595         handle_no_rfi_flush(NULL);
 596         return 0;
 597 }
 598 early_param("nopti", handle_no_pti);
 599
 600 static void do_nothing(void *unused)
 601 {
 602         /*
 603          * We don't need to do the flush explicitly, just enter+exit kernel is
 604          * sufficient, the RFI exit handlers will do the right thing.
 605          */
 606 }
 607
 608 void rfi_flush_enable(bool enable)
 609 {
 610         if (enable) {
 611                 do_rfi_flush_fixups(enabled_flush_types);
 612                 on_each_cpu(do_nothing, NULL, 1);
 613         } else
 614                 do_rfi_flush_fixups(L1D_FLUSH_NONE);
 615
 616         rfi_flush = enable;
 617 }
 618
 619 static void entry_flush_enable(bool enable)
 620 {
 621         if (enable) {
 622                 do_entry_flush_fixups(enabled_flush_types);
 623                 on_each_cpu(do_nothing, NULL, 1);
 624         } else {
 625                 do_entry_flush_fixups(L1D_FLUSH_NONE);
 626         }
 627
 628         entry_flush = enable;
 629 }
 630
 631 static void uaccess_flush_enable(bool enable)
 632 {
 633         if (enable) {
 634                 do_uaccess_flush_fixups(enabled_flush_types);
 635                 static_branch_enable(&uaccess_flush_key);
 636                 on_each_cpu(do_nothing, NULL, 1);
 637         } else {
 638                 static_branch_disable(&uaccess_flush_key);
 639                 do_uaccess_flush_fixups(L1D_FLUSH_NONE);
 640         }
 641
 642         uaccess_flush = enable;
 643 }
 644
 645 static void __ref init_fallback_flush(void)
 646 {
 647         u64 l1d_size, limit;
 648         int cpu;
 649
 650         /* Only allocate the fallback flush area once (at boot time). */
 651         if (l1d_flush_fallback_area)
 652                 return;
 653
 654         l1d_size = ppc64_caches.l1d.size;
 655
 656         /*
 657          * If there is no d-cache-size property in the device tree, l1d_size
 658          * could be zero. That leads to the loop in the asm wrapping around to
 659          * 2^64-1, and then walking off the end of the fallback area and
 660          * eventually causing a page fault which is fatal. Just default to
 661          * something vaguely sane.
 662          */
 663         if (!l1d_size)
 664                 l1d_size = (64 * 1024);
 665
 666         limit = min(ppc64_bolted_size(), ppc64_rma_size);
 667
 668         /*
 669          * Align to L1d size, and size it at 2x L1d size, to catch possible
 670          * hardware prefetch runoff. We don't have a recipe for load patterns to
 671          * reliably avoid the prefetcher.
 672          */
 673         l1d_flush_fallback_area = memblock_alloc_try_nid(l1d_size * 2,
 674                                                 l1d_size, MEMBLOCK_LOW_LIMIT,
 675                                                 limit, NUMA_NO_NODE);
 676         if (!l1d_flush_fallback_area)
 677                 panic("%s: Failed to allocate %llu bytes align=0x%llx max_addr=%pa\n",
 678                       __func__, l1d_size * 2, l1d_size, &limit);
 679
 680
 681         for_each_possible_cpu(cpu) {
 682                 struct paca_struct *paca = paca_ptrs[cpu];
 683                 paca->rfi_flush_fallback_area = l1d_flush_fallback_area;
 684                 paca->l1d_flush_size = l1d_size;
 685         }
 686 }
 687
 688 void setup_rfi_flush(enum l1d_flush_type types, bool enable)
 689 {
 690         if (types & L1D_FLUSH_FALLBACK) {
 691                 pr_info("rfi-flush: fallback displacement flush available\n");
 692                 init_fallback_flush();
 693         }
 694
 695         if (types & L1D_FLUSH_ORI)
 696                 pr_info("rfi-flush: ori type flush available\n");
 697
 698         if (types & L1D_FLUSH_MTTRIG)
 699                 pr_info("rfi-flush: mttrig type flush available\n");
 700
 701         enabled_flush_types = types;
 702
 703         if (!cpu_mitigations_off() && !no_rfi_flush)
 704                 rfi_flush_enable(enable);
 705 }
 706
 707 void setup_entry_flush(bool enable)
 708 {
 709         if (cpu_mitigations_off())
 710                 return;
 711
 712         if (!no_entry_flush)
 713                 entry_flush_enable(enable);
 714 }
 715
 716 void setup_uaccess_flush(bool enable)
 717 {
 718         if (cpu_mitigations_off())
 719                 return;
 720
 721         if (!no_uaccess_flush)
 722                 uaccess_flush_enable(enable);
 723 }
 724
 725 #ifdef CONFIG_DEBUG_FS
 726 static int count_cache_flush_set(void *data, u64 val)
 727 {
 728         bool enable;
 729
 730         if (val == 1)
 731                 enable = true;
 732         else if (val == 0)
 733                 enable = false;
 734         else
 735                 return -EINVAL;
 736
 737         toggle_branch_cache_flush(enable);
 738
 739         return 0;
 740 }
 741
 742 static int count_cache_flush_get(void *data, u64 *val)
 743 {
 744         if (count_cache_flush_type == BRANCH_CACHE_FLUSH_NONE)
 745                 *val = 0;
 746         else
 747                 *val = 1;
 748
 749         return 0;
 750 }
 751
 752 static int link_stack_flush_get(void *data, u64 *val)
 753 {
 754         if (link_stack_flush_type == BRANCH_CACHE_FLUSH_NONE)
 755                 *val = 0;
 756         else
 757                 *val = 1;
 758
 759         return 0;
 760 }
 761
 762 DEFINE_DEBUGFS_ATTRIBUTE(fops_count_cache_flush, count_cache_flush_get,
 763                          count_cache_flush_set, "%llu\n");
 764 DEFINE_DEBUGFS_ATTRIBUTE(fops_link_stack_flush, link_stack_flush_get,
 765                          count_cache_flush_set, "%llu\n");
 766
 767 static __init int count_cache_flush_debugfs_init(void)
 768 {
 769         debugfs_create_file_unsafe("count_cache_flush", 0600,
 770                                    arch_debugfs_dir, NULL,
 771                                    &fops_count_cache_flush);
 772         debugfs_create_file_unsafe("link_stack_flush", 0600,
 773                                    arch_debugfs_dir, NULL,
 774                                    &fops_link_stack_flush);
 775         return 0;
 776 }
 777 device_initcall(count_cache_flush_debugfs_init);
 778
 779 static int rfi_flush_set(void *data, u64 val)
 780 {
 781         bool enable;
 782
 783         if (val == 1)
 784                 enable = true;
 785         else if (val == 0)
 786                 enable = false;
 787         else
 788                 return -EINVAL;
 789
 790         /* Only do anything if we're changing state */
 791         if (enable != rfi_flush)
 792                 rfi_flush_enable(enable);
 793
 794         return 0;
 795 }
 796
 797 static int rfi_flush_get(void *data, u64 *val)
 798 {
 799         *val = rfi_flush ? 1 : 0;
 800         return 0;
 801 }
 802
 803 DEFINE_SIMPLE_ATTRIBUTE(fops_rfi_flush, rfi_flush_get, rfi_flush_set, "%llu\n");
 804
 805 static int entry_flush_set(void *data, u64 val)
 806 {
 807         bool enable;
 808
 809         if (val == 1)
 810                 enable = true;
 811         else if (val == 0)
 812                 enable = false;
 813         else
 814                 return -EINVAL;
 815
 816         /* Only do anything if we're changing state */
 817         if (enable != entry_flush)
 818                 entry_flush_enable(enable);
 819
 820         return 0;
 821 }
 822
 823 static int entry_flush_get(void *data, u64 *val)
 824 {
 825         *val = entry_flush ? 1 : 0;
 826         return 0;
 827 }
 828
 829 DEFINE_SIMPLE_ATTRIBUTE(fops_entry_flush, entry_flush_get, entry_flush_set, "%llu\n");
 830
 831 static int uaccess_flush_set(void *data, u64 val)
 832 {
 833         bool enable;
 834
 835         if (val == 1)
 836                 enable = true;
 837         else if (val == 0)
 838                 enable = false;
 839         else
 840                 return -EINVAL;
 841
 842         /* Only do anything if we're changing state */
 843         if (enable != uaccess_flush)
 844                 uaccess_flush_enable(enable);
 845
 846         return 0;
 847 }
 848
 849 static int uaccess_flush_get(void *data, u64 *val)
 850 {
 851         *val = uaccess_flush ? 1 : 0;
 852         return 0;
 853 }
 854
 855 DEFINE_SIMPLE_ATTRIBUTE(fops_uaccess_flush, uaccess_flush_get, uaccess_flush_set, "%llu\n");
 856
 857 static __init int rfi_flush_debugfs_init(void)
 858 {
 859         debugfs_create_file("rfi_flush", 0600, arch_debugfs_dir, NULL, &fops_rfi_flush);
 860         debugfs_create_file("entry_flush", 0600, arch_debugfs_dir, NULL, &fops_entry_flush);
 861         debugfs_create_file("uaccess_flush", 0600, arch_debugfs_dir, NULL, &fops_uaccess_flush);
 862         return 0;
 863 }
 864 device_initcall(rfi_flush_debugfs_init);
 865 #endif /* CONFIG_DEBUG_FS */
 866 #endif /* CONFIG_PPC_BOOK3S_64 */