1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Procedures for creating, accessing and interpreting the device tree.
5 * Paul Mackerras August 1996.
6 * Copyright (C) 1996-2005 Paul Mackerras.
8 * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
9 * {engebret|bergner}@us.ibm.com
14 #include <linux/kernel.h>
15 #include <linux/string.h>
16 #include <linux/init.h>
17 #include <linux/threads.h>
18 #include <linux/spinlock.h>
19 #include <linux/types.h>
20 #include <linux/pci.h>
21 #include <linux/delay.h>
22 #include <linux/initrd.h>
23 #include <linux/bitops.h>
24 #include <linux/export.h>
25 #include <linux/kexec.h>
26 #include <linux/irq.h>
27 #include <linux/memblock.h>
29 #include <linux/of_fdt.h>
30 #include <linux/libfdt.h>
31 #include <linux/cpu.h>
32 #include <linux/pgtable.h>
33 #include <linux/seq_buf.h>
37 #include <asm/processor.h>
40 #include <asm/kdump.h>
44 #include <asm/powernv.h>
45 #include <asm/iommu.h>
46 #include <asm/btext.h>
47 #include <asm/sections.h>
48 #include <asm/setup.h>
49 #include <asm/pci-bridge.h>
50 #include <asm/kexec.h>
52 #include <asm/fadump.h>
53 #include <asm/epapr_hcalls.h>
54 #include <asm/firmware.h>
55 #include <asm/dt_cpu_ftrs.h>
56 #include <asm/drmem.h>
57 #include <asm/ultravisor.h>
59 #include <asm/plpks.h>
61 #include <mm/mmu_decl.h>
64 #define DBG(fmt...) printk(KERN_ERR fmt)
69 int *chip_id_lookup_table;
72 int __initdata iommu_is_off;
73 int __initdata iommu_force_on;
74 unsigned long tce_alloc_start, tce_alloc_end;
76 unsigned int boot_cpu_node_count __ro_after_init;
78 static phys_addr_t first_memblock_size;
79 static int __initdata boot_cpu_count;
81 static int __init early_parse_mem(char *p)
86 memory_limit = PAGE_ALIGN(memparse(p, &p));
87 DBG("memory limit = 0x%llx\n", memory_limit);
91 early_param("mem", early_parse_mem);
94 * overlaps_initrd - check for overlap with page aligned extension of
97 static inline int overlaps_initrd(unsigned long start, unsigned long size)
99 #ifdef CONFIG_BLK_DEV_INITRD
103 return (start + size) > ALIGN_DOWN(initrd_start, PAGE_SIZE) &&
104 start <= ALIGN(initrd_end, PAGE_SIZE);
111 * move_device_tree - move tree to an unused area, if needed.
113 * The device tree may be allocated beyond our memory limit, or inside the
114 * crash kernel region for kdump, or within the page aligned range of initrd.
115 * If so, move it out of the way.
117 static void __init move_device_tree(void)
119 unsigned long start, size;
122 DBG("-> move_device_tree\n");
124 start = __pa(initial_boot_params);
125 size = fdt_totalsize(initial_boot_params);
127 if ((memory_limit && (start + size) > PHYSICAL_START + memory_limit) ||
128 !memblock_is_memory(start + size - 1) ||
129 overlaps_crashkernel(start, size) || overlaps_initrd(start, size)) {
130 p = memblock_alloc_raw(size, PAGE_SIZE);
132 panic("Failed to allocate %lu bytes to move device tree\n",
134 memcpy(p, initial_boot_params, size);
135 initial_boot_params = p;
136 DBG("Moved device tree to 0x%px\n", p);
139 DBG("<- move_device_tree\n");
143 * ibm,pa/pi-features is a per-cpu property that contains a string of
144 * attribute descriptors, each of which has a 2 byte header plus up
145 * to 254 bytes worth of processor attribute bits. First header
146 * byte specifies the number of bytes following the header.
147 * Second header byte is an "attribute-specifier" type, of which
148 * zero is the only currently-defined value.
149 * Implementation: Pass in the byte and bit offset for the feature
150 * that we are interested in. The function will return -1 if the
151 * pa-features property is missing, or a 1/0 to indicate if the feature
152 * is supported/not supported. Note that the bit numbers are
153 * big-endian to match the definition in PAPR.
156 unsigned long cpu_features; /* CPU_FTR_xxx bit */
157 unsigned long mmu_features; /* MMU_FTR_xxx bit */
158 unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */
159 unsigned int cpu_user_ftrs2; /* PPC_FEATURE2_xxx bit */
160 unsigned char pabyte; /* byte number in ibm,pa/pi-features */
161 unsigned char pabit; /* bit number (big-endian) */
162 unsigned char invert; /* if 1, pa bit set => clear feature */
165 static struct ibm_feature ibm_pa_features[] __initdata = {
166 { .pabyte = 0, .pabit = 0, .cpu_user_ftrs = PPC_FEATURE_HAS_MMU },
167 { .pabyte = 0, .pabit = 1, .cpu_user_ftrs = PPC_FEATURE_HAS_FPU },
168 { .pabyte = 0, .pabit = 3, .cpu_features = CPU_FTR_CTRL },
169 { .pabyte = 0, .pabit = 6, .cpu_features = CPU_FTR_NOEXECUTE },
170 { .pabyte = 1, .pabit = 2, .mmu_features = MMU_FTR_CI_LARGE_PAGE },
171 #ifdef CONFIG_PPC_RADIX_MMU
172 { .pabyte = 40, .pabit = 0, .mmu_features = MMU_FTR_TYPE_RADIX | MMU_FTR_GTSE },
174 { .pabyte = 5, .pabit = 0, .cpu_features = CPU_FTR_REAL_LE,
175 .cpu_user_ftrs = PPC_FEATURE_TRUE_LE },
177 * If the kernel doesn't support TM (ie CONFIG_PPC_TRANSACTIONAL_MEM=n),
178 * we don't want to turn on TM here, so we use the *_COMP versions
179 * which are 0 if the kernel doesn't support TM.
181 { .pabyte = 22, .pabit = 0, .cpu_features = CPU_FTR_TM_COMP,
182 .cpu_user_ftrs2 = PPC_FEATURE2_HTM_COMP | PPC_FEATURE2_HTM_NOSC_COMP },
184 { .pabyte = 64, .pabit = 0, .cpu_features = CPU_FTR_DAWR1 },
185 { .pabyte = 68, .pabit = 5, .cpu_features = CPU_FTR_DEXCR_NPHIE },
189 * ibm,pi-features property provides the support of processor specific
190 * options not described in ibm,pa-features. Right now use byte 0, bit 3
191 * which indicates the occurrence of DSI interrupt when the paste operation
192 * on the suspended NX window.
194 static struct ibm_feature ibm_pi_features[] __initdata = {
195 { .pabyte = 0, .pabit = 3, .mmu_features = MMU_FTR_NX_DSI },
198 static void __init scan_features(unsigned long node, const unsigned char *ftrs,
199 unsigned long tablelen,
200 struct ibm_feature *fp,
201 unsigned long ft_size)
203 unsigned long i, len, bit;
205 /* find descriptor with type == 0 */
211 return; /* descriptor 0 not found */
218 /* loop over bits we know about */
219 for (i = 0; i < ft_size; ++i, ++fp) {
220 if (fp->pabyte >= ftrs[0])
222 bit = (ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1;
223 if (bit ^ fp->invert) {
224 cur_cpu_spec->cpu_features |= fp->cpu_features;
225 cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
226 cur_cpu_spec->cpu_user_features2 |= fp->cpu_user_ftrs2;
227 cur_cpu_spec->mmu_features |= fp->mmu_features;
229 cur_cpu_spec->cpu_features &= ~fp->cpu_features;
230 cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs;
231 cur_cpu_spec->cpu_user_features2 &= ~fp->cpu_user_ftrs2;
232 cur_cpu_spec->mmu_features &= ~fp->mmu_features;
237 static void __init check_cpu_features(unsigned long node, char *name,
238 struct ibm_feature *fp,
241 const unsigned char *pa_ftrs;
244 pa_ftrs = of_get_flat_dt_prop(node, name, &tablelen);
248 scan_features(node, pa_ftrs, tablelen, fp, size);
251 #ifdef CONFIG_PPC_64S_HASH_MMU
252 static void __init init_mmu_slb_size(unsigned long node)
254 const __be32 *slb_size_ptr;
256 slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL) ? :
257 of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
260 mmu_slb_size = be32_to_cpup(slb_size_ptr);
263 #define init_mmu_slb_size(node) do { } while(0)
266 static struct feature_property {
269 unsigned long cpu_feature;
270 unsigned long cpu_user_ftr;
271 } feature_properties[] __initdata = {
272 #ifdef CONFIG_ALTIVEC
273 {"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
274 {"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
275 #endif /* CONFIG_ALTIVEC */
277 /* Yes, this _really_ is ibm,vmx == 2 to enable VSX */
278 {"ibm,vmx", 2, CPU_FTR_VSX, PPC_FEATURE_HAS_VSX},
279 #endif /* CONFIG_VSX */
281 {"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP},
282 {"ibm,purr", 1, CPU_FTR_PURR, 0},
283 {"ibm,spurr", 1, CPU_FTR_SPURR, 0},
284 #endif /* CONFIG_PPC64 */
287 #if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU)
288 static __init void identical_pvr_fixup(unsigned long node)
291 const char *model = of_get_flat_dt_prop(node, "model", NULL);
294 * Since 440GR(x)/440EP(x) processors have the same pvr,
295 * we check the node path and set bit 28 in the cur_cpu_spec
296 * pvr for EP(x) processor version. This bit is always 0 in
297 * the "real" pvr. Then we call identify_cpu again with
298 * the new logical pvr to enable FPU support.
300 if (model && strstr(model, "440EP")) {
301 pvr = cur_cpu_spec->pvr_value | 0x8;
302 identify_cpu(0, pvr);
303 DBG("Using logical pvr %x for %s\n", pvr, model);
307 #define identical_pvr_fixup(node) do { } while(0)
310 static void __init check_cpu_feature_properties(unsigned long node)
313 struct feature_property *fp = feature_properties;
316 for (i = 0; i < (int)ARRAY_SIZE(feature_properties); ++i, ++fp) {
317 prop = of_get_flat_dt_prop(node, fp->name, NULL);
318 if (prop && be32_to_cpup(prop) >= fp->min_value) {
319 cur_cpu_spec->cpu_features |= fp->cpu_feature;
320 cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftr;
325 static int __init early_init_dt_scan_cpus(unsigned long node,
326 const char *uname, int depth,
329 const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
331 const __be32 *intserv;
335 int found_thread = 0;
337 /* We are scanning "cpu" nodes only */
338 if (type == NULL || strcmp(type, "cpu") != 0)
341 if (IS_ENABLED(CONFIG_PPC64))
342 boot_cpu_node_count++;
344 /* Get physical cpuid */
345 intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len);
347 intserv = of_get_flat_dt_prop(node, "reg", &len);
349 nthreads = len / sizeof(int);
352 * Now see if any of these threads match our boot cpu.
353 * NOTE: This must match the parsing done in smp_setup_cpu_maps.
355 for (i = 0; i < nthreads; i++) {
356 if (be32_to_cpu(intserv[i]) ==
357 fdt_boot_cpuid_phys(initial_boot_params)) {
358 found = boot_cpu_count;
362 /* logical cpu id is always 0 on UP kernels */
367 /* Not the boot CPU */
371 DBG("boot cpu: logical %d physical %d\n", found,
372 be32_to_cpu(intserv[found_thread]));
375 if (IS_ENABLED(CONFIG_PPC64))
376 boot_cpu_hwid = be32_to_cpu(intserv[found_thread]);
379 * PAPR defines "logical" PVR values for cpus that
380 * meet various levels of the architecture:
381 * 0x0f000001 Architecture version 2.04
382 * 0x0f000002 Architecture version 2.05
383 * If the cpu-version property in the cpu node contains
384 * such a value, we call identify_cpu again with the
385 * logical PVR value in order to use the cpu feature
386 * bits appropriate for the architecture level.
388 * A POWER6 partition in "POWER6 architected" mode
389 * uses the 0x0f000002 PVR value; in POWER5+ mode
390 * it uses 0x0f000001.
392 * If we're using device tree CPU feature discovery then we don't
393 * support the cpu-version property, and it's the responsibility of the
394 * firmware/hypervisor to provide the correct feature set for the
395 * architecture level via the ibm,powerpc-cpu-features binding.
397 if (!dt_cpu_ftrs_in_use()) {
398 prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
399 if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000) {
400 identify_cpu(0, be32_to_cpup(prop));
401 seq_buf_printf(&ppc_hw_desc, "0x%04x ", be32_to_cpup(prop));
404 check_cpu_feature_properties(node);
405 check_cpu_features(node, "ibm,pa-features", ibm_pa_features,
406 ARRAY_SIZE(ibm_pa_features));
407 check_cpu_features(node, "ibm,pi-features", ibm_pi_features,
408 ARRAY_SIZE(ibm_pi_features));
411 identical_pvr_fixup(node);
412 init_mmu_slb_size(node);
416 cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
417 else if (!dt_cpu_ftrs_in_use())
418 cur_cpu_spec->cpu_features |= CPU_FTR_SMT;
424 static int __init early_init_dt_scan_chosen_ppc(unsigned long node,
426 int depth, void *data)
428 const unsigned long *lprop; /* All these set by kernel, so no need to convert endian */
430 /* Use common scan routine to determine if this is the chosen node */
431 if (early_init_dt_scan_chosen(data) < 0)
435 /* check if iommu is forced on or off */
436 if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL)
438 if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL)
442 /* mem=x on the command line is the preferred mechanism */
443 lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
445 memory_limit = *lprop;
448 lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
450 tce_alloc_start = *lprop;
451 lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
453 tce_alloc_end = *lprop;
456 #ifdef CONFIG_KEXEC_CORE
457 lprop = of_get_flat_dt_prop(node, "linux,crashkernel-base", NULL);
459 crashk_res.start = *lprop;
461 lprop = of_get_flat_dt_prop(node, "linux,crashkernel-size", NULL);
463 crashk_res.end = crashk_res.start + *lprop - 1;
471 * Compare the range against max mem limit and update
472 * size if it cross the limit.
475 #ifdef CONFIG_SPARSEMEM
476 static bool __init validate_mem_limit(u64 base, u64 *size)
478 u64 max_mem = 1UL << (MAX_PHYSMEM_BITS);
482 if ((base + *size) > max_mem)
483 *size = max_mem - base;
487 static bool __init validate_mem_limit(u64 base, u64 *size)
493 #ifdef CONFIG_PPC_PSERIES
495 * Interpret the ibm dynamic reconfiguration memory LMBs.
496 * This contains a list of memory blocks along with NUMA affinity
499 static int __init early_init_drmem_lmb(struct drmem_lmb *lmb,
504 int is_kexec_kdump = 0, rngs;
506 base = lmb->base_addr;
507 size = drmem_lmb_size();
511 * Skip this block if the reserved bit is set in flags
512 * or if the block is not assigned to this partition.
514 if ((lmb->flags & DRCONF_MEM_RESERVED) ||
515 !(lmb->flags & DRCONF_MEM_ASSIGNED))
521 if (is_kexec_kdump) {
523 * For each memblock in ibm,dynamic-memory, a
524 * corresponding entry in linux,drconf-usable-memory
525 * property contains a counter 'p' followed by 'p'
526 * (base, size) duple. Now read the counter from
527 * linux,drconf-usable-memory property
529 rngs = dt_mem_next_cell(dt_root_size_cells, usm);
530 if (!rngs) /* there are no (base, size) duple */
535 if (is_kexec_kdump) {
536 base = dt_mem_next_cell(dt_root_addr_cells, usm);
537 size = dt_mem_next_cell(dt_root_size_cells, usm);
541 if (base >= 0x80000000ul)
543 if ((base + size) > 0x80000000ul)
544 size = 0x80000000ul - base;
547 if (!validate_mem_limit(base, &size))
550 DBG("Adding: %llx -> %llx\n", base, size);
551 memblock_add(base, size);
553 if (lmb->flags & DRCONF_MEM_HOTREMOVABLE)
554 memblock_mark_hotplug(base, size);
559 #endif /* CONFIG_PPC_PSERIES */
561 static int __init early_init_dt_scan_memory_ppc(void)
563 #ifdef CONFIG_PPC_PSERIES
564 const void *fdt = initial_boot_params;
565 int node = fdt_path_offset(fdt, "/ibm,dynamic-reconfiguration-memory");
568 walk_drmem_lmbs_early(node, NULL, early_init_drmem_lmb);
572 return early_init_dt_scan_memory();
576 * For a relocatable kernel, we need to get the memstart_addr first,
577 * then use it to calculate the virtual kernel start address. This has
578 * to happen at a very early stage (before machine_init). In this case,
579 * we just want to get the memstart_address and would not like to mess the
580 * memblock at this stage. So introduce a variable to skip the memblock_add()
583 #ifdef CONFIG_RELOCATABLE
584 static int add_mem_to_memblock = 1;
586 #define add_mem_to_memblock 1
589 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
593 if (base >= 0x80000000ul)
595 if ((base + size) > 0x80000000ul)
596 size = 0x80000000ul - base;
599 /* Keep track of the beginning of memory -and- the size of
600 * the very first block in the device-tree as it represents
601 * the RMA on ppc64 server
603 if (base < memstart_addr) {
604 memstart_addr = base;
605 first_memblock_size = size;
608 /* Add the chunk to the MEMBLOCK list */
609 if (add_mem_to_memblock) {
610 if (validate_mem_limit(base, &size))
611 memblock_add(base, size);
615 static void __init early_reserve_mem_dt(void)
617 unsigned long i, dt_root;
621 early_init_fdt_reserve_self();
622 early_init_fdt_scan_reserved_mem();
624 dt_root = of_get_flat_dt_root();
626 prop = of_get_flat_dt_prop(dt_root, "reserved-ranges", &len);
631 DBG("Found new-style reserved-ranges\n");
633 /* Each reserved range is an (address,size) pair, 2 cells each,
634 * totalling 4 cells per range. */
635 for (i = 0; i < len / (sizeof(*prop) * 4); i++) {
638 base = of_read_number(prop + (i * 4) + 0, 2);
639 size = of_read_number(prop + (i * 4) + 2, 2);
642 DBG("reserving: %llx -> %llx\n", base, size);
643 memblock_reserve(base, size);
648 static void __init early_reserve_mem(void)
652 reserve_map = (__be64 *)(((unsigned long)initial_boot_params) +
653 fdt_off_mem_rsvmap(initial_boot_params));
655 /* Look for the new "reserved-regions" property in the DT */
656 early_reserve_mem_dt();
658 #ifdef CONFIG_BLK_DEV_INITRD
659 /* Then reserve the initrd, if any */
660 if (initrd_start && (initrd_end > initrd_start)) {
661 memblock_reserve(ALIGN_DOWN(__pa(initrd_start), PAGE_SIZE),
662 ALIGN(initrd_end, PAGE_SIZE) -
663 ALIGN_DOWN(initrd_start, PAGE_SIZE));
665 #endif /* CONFIG_BLK_DEV_INITRD */
667 if (!IS_ENABLED(CONFIG_PPC32))
671 * Handle the case where we might be booting from an old kexec
672 * image that setup the mem_rsvmap as pairs of 32-bit values
674 if (be64_to_cpup(reserve_map) > 0xffffffffull) {
675 u32 base_32, size_32;
676 __be32 *reserve_map_32 = (__be32 *)reserve_map;
678 DBG("Found old 32-bit reserve map\n");
681 base_32 = be32_to_cpup(reserve_map_32++);
682 size_32 = be32_to_cpup(reserve_map_32++);
685 DBG("reserving: %x -> %x\n", base_32, size_32);
686 memblock_reserve(base_32, size_32);
692 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
693 static bool tm_disabled __initdata;
695 static int __init parse_ppc_tm(char *str)
699 if (kstrtobool(str, &res))
706 early_param("ppc_tm", parse_ppc_tm);
708 static void __init tm_init(void)
711 pr_info("Disabling hardware transactional memory (HTM)\n");
712 cur_cpu_spec->cpu_user_features2 &=
713 ~(PPC_FEATURE2_HTM_NOSC | PPC_FEATURE2_HTM);
714 cur_cpu_spec->cpu_features &= ~CPU_FTR_TM;
721 static void tm_init(void) { }
722 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
725 early_init_dt_scan_model(unsigned long node, const char *uname,
726 int depth, void *data)
733 prop = of_get_flat_dt_prop(node, "model", NULL);
735 seq_buf_printf(&ppc_hw_desc, "%s ", prop);
742 static void __init save_fscr_to_task(void)
745 * Ensure the init_task (pid 0, aka swapper) uses the value of FSCR we
746 * have configured via the device tree features or via __init_FSCR().
747 * That value will then be propagated to pid 1 (init) and all future
750 if (early_cpu_has_feature(CPU_FTR_ARCH_207S))
751 init_task.thread.fscr = mfspr(SPRN_FSCR);
754 static inline void save_fscr_to_task(void) {}
758 void __init early_init_devtree(void *params)
762 DBG(" -> early_init_devtree(%px)\n", params);
764 /* Too early to BUG_ON(), do it by hand */
765 if (!early_init_dt_verify(params))
766 panic("BUG: Failed verifying flat device tree, bad version?");
768 of_scan_flat_dt(early_init_dt_scan_model, NULL);
770 #ifdef CONFIG_PPC_RTAS
771 /* Some machines might need RTAS info for debugging, grab it now. */
772 of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
775 #ifdef CONFIG_PPC_POWERNV
776 /* Some machines might need OPAL info for debugging, grab it now. */
777 of_scan_flat_dt(early_init_dt_scan_opal, NULL);
779 /* Scan tree for ultravisor feature */
780 of_scan_flat_dt(early_init_dt_scan_ultravisor, NULL);
783 #if defined(CONFIG_FA_DUMP) || defined(CONFIG_PRESERVE_FA_DUMP)
784 /* scan tree to see if dump is active during last boot */
785 of_scan_flat_dt(early_init_dt_scan_fw_dump, NULL);
788 /* Retrieve various informations from the /chosen node of the
789 * device-tree, including the platform type, initrd location and
790 * size, TCE reserve, and more ...
792 of_scan_flat_dt(early_init_dt_scan_chosen_ppc, boot_command_line);
794 /* Scan memory nodes and rebuild MEMBLOCKs */
795 early_init_dt_scan_root();
796 early_init_dt_scan_memory_ppc();
799 * As generic code authors expect to be able to use static keys
800 * in early_param() handlers, we initialize the static keys just
801 * before parsing early params (it's fine to call jump_label_init()
807 /* make sure we've parsed cmdline for mem= before this */
809 first_memblock_size = min_t(u64, first_memblock_size, memory_limit);
810 setup_initial_memory_limit(memstart_addr, first_memblock_size);
811 /* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
812 memblock_reserve(PHYSICAL_START, __pa(_end) - PHYSICAL_START);
813 /* If relocatable, reserve first 32k for interrupt vectors etc. */
814 if (PHYSICAL_START > MEMORY_START)
815 memblock_reserve(MEMORY_START, 0x8000);
816 reserve_kdump_trampoline();
817 #if defined(CONFIG_FA_DUMP) || defined(CONFIG_PRESERVE_FA_DUMP)
819 * If we fail to reserve memory for firmware-assisted dump then
820 * fallback to kexec based kdump.
822 if (fadump_reserve_mem() == 0)
824 reserve_crashkernel();
827 /* Ensure that total memory size is page-aligned. */
828 limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
829 memblock_enforce_memory_limit(limit);
831 #if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_PPC_4K_PAGES)
832 if (!early_radix_enabled())
833 memblock_cap_memory_range(0, 1UL << (H_MAX_PHYSMEM_BITS));
836 memblock_allow_resize();
839 DBG("Phys. mem: %llx\n", (unsigned long long)memblock_phys_mem_size());
841 /* We may need to relocate the flat tree, do it now.
842 * FIXME .. and the initrd too? */
845 DBG("Scanning CPUs ...\n");
849 // We can now add the CPU name & PVR to the hardware description
850 seq_buf_printf(&ppc_hw_desc, "%s 0x%04lx ", cur_cpu_spec->cpu_name, mfspr(SPRN_PVR));
852 /* Retrieve CPU related informations from the flat tree
853 * (altivec support, boot CPU ID, ...)
855 of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
856 if (boot_cpuid < 0) {
857 printk("Failed to identify boot CPU !\n");
863 #if defined(CONFIG_SMP) && defined(CONFIG_PPC64)
864 /* We'll later wait for secondaries to check in; there are
865 * NCPUS-1 non-boot CPUs :-)
867 spinning_secondaries = boot_cpu_count - 1;
870 mmu_early_init_devtree();
872 #ifdef CONFIG_PPC_POWERNV
873 /* Scan and build the list of machine check recoverable ranges */
874 of_scan_flat_dt(early_init_dt_scan_recoverable_ranges, NULL);
876 epapr_paravirt_early_init();
878 /* Now try to figure out if we are running on LPAR and so on */
879 pseries_probe_fw_features();
882 * Initialize pkey features and default AMR/IAMR values
884 pkey_early_init_devtree();
886 #ifdef CONFIG_PPC_PS3
887 /* Identify PS3 firmware */
888 if (of_flat_dt_is_compatible(of_get_flat_dt_root(), "sony,ps3"))
889 powerpc_firmware_features |= FW_FEATURE_PS3_POSSIBLE;
892 /* If kexec left a PLPKS password in the DT, get it and clear it */
893 plpks_early_init_devtree();
897 DBG(" <- early_init_devtree()\n");
900 #ifdef CONFIG_RELOCATABLE
902 * This function run before early_init_devtree, so we have to init
903 * initial_boot_params.
905 void __init early_get_first_memblock_info(void *params, phys_addr_t *size)
907 /* Setup flat device-tree pointer */
908 initial_boot_params = params;
911 * Scan the memory nodes and set add_mem_to_memblock to 0 to avoid
914 add_mem_to_memblock = 0;
915 early_init_dt_scan_root();
916 early_init_dt_scan_memory_ppc();
917 add_mem_to_memblock = 1;
920 *size = first_memblock_size;
926 * New implementation of the OF "find" APIs, return a refcounted
927 * object, call of_node_put() when done. The device tree and list
928 * are protected by a rw_lock.
930 * Note that property management will need some locking as well,
931 * this isn't dealt with yet.
936 * of_get_ibm_chip_id - Returns the IBM "chip-id" of a device
937 * @np: device node of the device
939 * This looks for a property "ibm,chip-id" in the node or any
940 * of its parents and returns its content, or -1 if it cannot
943 int of_get_ibm_chip_id(struct device_node *np)
950 * Skiboot may produce memory nodes that contain more than one
951 * cell in chip-id, we only read the first one here.
953 if (!of_property_read_u32(np, "ibm,chip-id", &chip_id)) {
958 np = of_get_next_parent(np);
962 EXPORT_SYMBOL(of_get_ibm_chip_id);
965 * cpu_to_chip_id - Return the cpus chip-id
966 * @cpu: The logical cpu number.
968 * Return the value of the ibm,chip-id property corresponding to the given
969 * logical cpu number. If the chip-id can not be found, returns -1.
971 int cpu_to_chip_id(int cpu)
973 struct device_node *np;
976 idx = cpu / threads_per_core;
977 if (chip_id_lookup_table && chip_id_lookup_table[idx] != -1)
978 return chip_id_lookup_table[idx];
980 np = of_get_cpu_node(cpu, NULL);
982 ret = of_get_ibm_chip_id(np);
985 if (chip_id_lookup_table)
986 chip_id_lookup_table[idx] = ret;
991 EXPORT_SYMBOL(cpu_to_chip_id);
993 bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
997 * Early firmware scanning must use this rather than
998 * get_hard_smp_processor_id because we don't have pacas allocated
999 * until memory topology is discovered.
1001 if (cpu_to_phys_id != NULL)
1002 return (int)phys_id == cpu_to_phys_id[cpu];
1005 return (int)phys_id == get_hard_smp_processor_id(cpu);