arch/powerpc/include/asm/security_features.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Security related feature bit definitions.
   4  *
   5  * Copyright 2018, Michael Ellerman, IBM Corporation.
   6  */
   7
   8 #ifndef _ASM_POWERPC_SECURITY_FEATURES_H
   9 #define _ASM_POWERPC_SECURITY_FEATURES_H
  10
  11
  12 extern unsigned long powerpc_security_features;
  13 extern bool rfi_flush;
  14
  15 /* These are bit flags */
  16 enum stf_barrier_type {
  17         STF_BARRIER_NONE        = 0x1,
  18         STF_BARRIER_FALLBACK    = 0x2,
  19         STF_BARRIER_EIEIO       = 0x4,
  20         STF_BARRIER_SYNC_ORI    = 0x8,
  21 };
  22
  23 void setup_stf_barrier(void);
  24 void do_stf_barrier_fixups(enum stf_barrier_type types);
  25 void setup_count_cache_flush(void);
  26
  27 static inline void security_ftr_set(unsigned long feature)
  28 {
  29         powerpc_security_features |= feature;
  30 }
  31
  32 static inline void security_ftr_clear(unsigned long feature)
  33 {
  34         powerpc_security_features &= ~feature;
  35 }
  36
  37 static inline bool security_ftr_enabled(unsigned long feature)
  38 {
  39         return !!(powerpc_security_features & feature);
  40 }
  41
  42 #ifdef CONFIG_PPC_BOOK3S_64
  43 enum stf_barrier_type stf_barrier_type_get(void);
  44 #else
  45 static inline enum stf_barrier_type stf_barrier_type_get(void) { return STF_BARRIER_NONE; }
  46 #endif
  47
  48 // Features indicating support for Spectre/Meltdown mitigations
  49
  50 // The L1-D cache can be flushed with ori r30,r30,0
  51 #define SEC_FTR_L1D_FLUSH_ORI30         0x0000000000000001ull
  52
  53 // The L1-D cache can be flushed with mtspr 882,r0 (aka SPRN_TRIG2)
  54 #define SEC_FTR_L1D_FLUSH_TRIG2         0x0000000000000002ull
  55
  56 // ori r31,r31,0 acts as a speculation barrier
  57 #define SEC_FTR_SPEC_BAR_ORI31          0x0000000000000004ull
  58
  59 // Speculation past bctr is disabled
  60 #define SEC_FTR_BCCTRL_SERIALISED       0x0000000000000008ull
  61
  62 // Entries in L1-D are private to a SMT thread
  63 #define SEC_FTR_L1D_THREAD_PRIV         0x0000000000000010ull
  64
  65 // Indirect branch prediction cache disabled
  66 #define SEC_FTR_COUNT_CACHE_DISABLED    0x0000000000000020ull
  67
  68 // bcctr 2,0,0 triggers a hardware assisted count cache flush
  69 #define SEC_FTR_BCCTR_FLUSH_ASSIST      0x0000000000000800ull
  70
  71
  72 // Features indicating need for Spectre/Meltdown mitigations
  73
  74 // The L1-D cache should be flushed on MSR[HV] 1->0 transition (hypervisor to guest)
  75 #define SEC_FTR_L1D_FLUSH_HV            0x0000000000000040ull
  76
  77 // The L1-D cache should be flushed on MSR[PR] 0->1 transition (kernel to userspace)
  78 #define SEC_FTR_L1D_FLUSH_PR            0x0000000000000080ull
  79
  80 // A speculation barrier should be used for bounds checks (Spectre variant 1)
  81 #define SEC_FTR_BNDS_CHK_SPEC_BAR       0x0000000000000100ull
  82
  83 // Firmware configuration indicates user favours security over performance
  84 #define SEC_FTR_FAVOUR_SECURITY         0x0000000000000200ull
  85
  86 // Software required to flush count cache on context switch
  87 #define SEC_FTR_FLUSH_COUNT_CACHE       0x0000000000000400ull
  88
  89 // Software required to flush link stack on context switch
  90 #define SEC_FTR_FLUSH_LINK_STACK        0x0000000000001000ull
  91
  92 // The L1-D cache should be flushed when entering the kernel
  93 #define SEC_FTR_L1D_FLUSH_ENTRY         0x0000000000004000ull
  94
  95 // The L1-D cache should be flushed after user accesses from the kernel
  96 #define SEC_FTR_L1D_FLUSH_UACCESS       0x0000000000008000ull
  97
  98 // Features enabled by default
  99 #define SEC_FTR_DEFAULT \
 100         (SEC_FTR_L1D_FLUSH_HV | \
 101          SEC_FTR_L1D_FLUSH_PR | \
 102          SEC_FTR_BNDS_CHK_SPEC_BAR | \
 103          SEC_FTR_L1D_FLUSH_ENTRY | \
 104          SEC_FTR_L1D_FLUSH_UACCESS | \
 105          SEC_FTR_FAVOUR_SECURITY)
 106
 107 #endif /* _ASM_POWERPC_SECURITY_FEATURES_H */