arch/powerpc/boot/dts/mpc8377_rdb.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * MPC8377E RDB Device Tree Source
   4  *
   5  * Copyright 2007, 2008 Freescale Semiconductor Inc.
   6  */
   7
   8 /dts-v1/;
   9
  10 / {
  11         compatible = "fsl,mpc8377rdb";
  12         #address-cells = <1>;
  13         #size-cells = <1>;
  14
  15         aliases {
  16                 ethernet0 = &enet0;
  17                 ethernet1 = &enet1;
  18                 serial0 = &serial0;
  19                 serial1 = &serial1;
  20                 pci0 = &pci0;
  21                 pci1 = &pci1;
  22                 pci2 = &pci2;
  23         };
  24
  25         cpus {
  26                 #address-cells = <1>;
  27                 #size-cells = <0>;
  28
  29                 PowerPC,8377@0 {
  30                         device_type = "cpu";
  31                         reg = <0x0>;
  32                         d-cache-line-size = <32>;
  33                         i-cache-line-size = <32>;
  34                         d-cache-size = <32768>;
  35                         i-cache-size = <32768>;
  36                         timebase-frequency = <0>;
  37                         bus-frequency = <0>;
  38                         clock-frequency = <0>;
  39                 };
  40         };
  41
  42         memory {
  43                 device_type = "memory";
  44                 reg = <0x00000000 0x10000000>;  // 256MB at 0
  45         };
  46
  47         localbus@e0005000 {
  48                 #address-cells = <2>;
  49                 #size-cells = <1>;
  50                 compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
  51                 reg = <0xe0005000 0x1000>;
  52                 interrupts = <77 0x8>;
  53                 interrupt-parent = <&ipic>;
  54
  55                 // CS0 and CS1 are swapped when
  56                 // booting from nand, but the
  57                 // addresses are the same.
  58                 ranges = <0x0 0x0 0xfe000000 0x00800000
  59                           0x1 0x0 0xe0600000 0x00008000
  60                           0x2 0x0 0xf0000000 0x00020000
  61                           0x3 0x0 0xfa000000 0x00008000>;
  62
  63                 flash@0,0 {
  64                         #address-cells = <1>;
  65                         #size-cells = <1>;
  66                         compatible = "cfi-flash";
  67                         reg = <0x0 0x0 0x800000>;
  68                         bank-width = <2>;
  69                         device-width = <1>;
  70                 };
  71
  72                 nand@1,0 {
  73                         #address-cells = <1>;
  74                         #size-cells = <1>;
  75                         compatible = "fsl,mpc8377-fcm-nand",
  76                                      "fsl,elbc-fcm-nand";
  77                         reg = <0x1 0x0 0x8000>;
  78
  79                         u-boot@0 {
  80                                 reg = <0x0 0x100000>;
  81                                 read-only;
  82                         };
  83
  84                         kernel@100000 {
  85                                 reg = <0x100000 0x300000>;
  86                         };
  87                         fs@400000 {
  88                                 reg = <0x400000 0x1c00000>;
  89                         };
  90                 };
  91         };
  92
  93         immr@e0000000 {
  94                 #address-cells = <1>;
  95                 #size-cells = <1>;
  96                 device_type = "soc";
  97                 compatible = "simple-bus";
  98                 ranges = <0x0 0xe0000000 0x00100000>;
  99                 reg = <0xe0000000 0x00000200>;
 100                 bus-frequency = <0>;
 101
 102                 wdt@200 {
 103                         device_type = "watchdog";
 104                         compatible = "mpc83xx_wdt";
 105                         reg = <0x200 0x100>;
 106                 };
 107
 108                 gpio1: gpio-controller@c00 {
 109                         #gpio-cells = <2>;
 110                         compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
 111                         reg = <0xc00 0x100>;
 112                         interrupts = <74 0x8>;
 113                         interrupt-parent = <&ipic>;
 114                         gpio-controller;
 115                 };
 116
 117                 gpio2: gpio-controller@d00 {
 118                         #gpio-cells = <2>;
 119                         compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
 120                         reg = <0xd00 0x100>;
 121                         interrupts = <75 0x8>;
 122                         interrupt-parent = <&ipic>;
 123                         gpio-controller;
 124                 };
 125
 126                 sleep-nexus {
 127                         #address-cells = <1>;
 128                         #size-cells = <1>;
 129                         compatible = "simple-bus";
 130                         sleep = <&pmc 0x0c000000>;
 131                         ranges;
 132
 133                         i2c@3000 {
 134                                 #address-cells = <1>;
 135                                 #size-cells = <0>;
 136                                 cell-index = <0>;
 137                                 compatible = "fsl-i2c";
 138                                 reg = <0x3000 0x100>;
 139                                 interrupts = <14 0x8>;
 140                                 interrupt-parent = <&ipic>;
 141                                 dfsrr;
 142
 143                                 dtt@48 {
 144                                         compatible = "national,lm75";
 145                                         reg = <0x48>;
 146                                 };
 147
 148                                 at24@50 {
 149                                         compatible = "atmel,24c256";
 150                                         reg = <0x50>;
 151                                 };
 152
 153                                 rtc@68 {
 154                                         compatible = "dallas,ds1339";
 155                                         reg = <0x68>;
 156                                 };
 157
 158                                 mcu_pio: mcu@a {
 159                                         #gpio-cells = <2>;
 160                                         compatible = "fsl,mc9s08qg8-mpc8377erdb",
 161                                                      "fsl,mcu-mpc8349emitx";
 162                                         reg = <0x0a>;
 163                                         gpio-controller;
 164                                 };
 165                         };
 166
 167                         sdhci@2e000 {
 168                                 compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
 169                                 reg = <0x2e000 0x1000>;
 170                                 interrupts = <42 0x8>;
 171                                 interrupt-parent = <&ipic>;
 172                                 sdhci,wp-inverted;
 173                                 /* Filled in by U-Boot */
 174                                 clock-frequency = <111111111>;
 175                         };
 176                 };
 177
 178                 i2c@3100 {
 179                         #address-cells = <1>;
 180                         #size-cells = <0>;
 181                         cell-index = <1>;
 182                         compatible = "fsl-i2c";
 183                         reg = <0x3100 0x100>;
 184                         interrupts = <15 0x8>;
 185                         interrupt-parent = <&ipic>;
 186                         dfsrr;
 187                 };
 188
 189                 spi@7000 {
 190                         cell-index = <0>;
 191                         compatible = "fsl,spi";
 192                         reg = <0x7000 0x1000>;
 193                         interrupts = <16 0x8>;
 194                         interrupt-parent = <&ipic>;
 195                         mode = "cpu";
 196                 };
 197
 198                 dma@82a8 {
 199                         #address-cells = <1>;
 200                         #size-cells = <1>;
 201                         compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
 202                         reg = <0x82a8 4>;
 203                         ranges = <0 0x8100 0x1a8>;
 204                         interrupt-parent = <&ipic>;
 205                         interrupts = <71 8>;
 206                         cell-index = <0>;
 207                         dma-channel@0 {
 208                                 compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
 209                                 reg = <0 0x80>;
 210                                 cell-index = <0>;
 211                                 interrupt-parent = <&ipic>;
 212                                 interrupts = <71 8>;
 213                         };
 214                         dma-channel@80 {
 215                                 compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
 216                                 reg = <0x80 0x80>;
 217                                 cell-index = <1>;
 218                                 interrupt-parent = <&ipic>;
 219                                 interrupts = <71 8>;
 220                         };
 221                         dma-channel@100 {
 222                                 compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
 223                                 reg = <0x100 0x80>;
 224                                 cell-index = <2>;
 225                                 interrupt-parent = <&ipic>;
 226                                 interrupts = <71 8>;
 227                         };
 228                         dma-channel@180 {
 229                                 compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
 230                                 reg = <0x180 0x28>;
 231                                 cell-index = <3>;
 232                                 interrupt-parent = <&ipic>;
 233                                 interrupts = <71 8>;
 234                         };
 235                 };
 236
 237                 usb@23000 {
 238                         compatible = "fsl-usb2-dr";
 239                         reg = <0x23000 0x1000>;
 240                         #address-cells = <1>;
 241                         #size-cells = <0>;
 242                         interrupt-parent = <&ipic>;
 243                         interrupts = <38 0x8>;
 244                         phy_type = "ulpi";
 245                         sleep = <&pmc 0x00c00000>;
 246                 };
 247
 248                 enet0: ethernet@24000 {
 249                         #address-cells = <1>;
 250                         #size-cells = <1>;
 251                         cell-index = <0>;
 252                         device_type = "network";
 253                         model = "eTSEC";
 254                         compatible = "gianfar";
 255                         reg = <0x24000 0x1000>;
 256                         ranges = <0x0 0x24000 0x1000>;
 257                         local-mac-address = [ 00 00 00 00 00 00 ];
 258                         interrupts = <32 0x8 33 0x8 34 0x8>;
 259                         phy-connection-type = "mii";
 260                         interrupt-parent = <&ipic>;
 261                         tbi-handle = <&tbi0>;
 262                         phy-handle = <&phy2>;
 263                         sleep = <&pmc 0xc0000000>;
 264                         fsl,magic-packet;
 265
 266                         mdio@520 {
 267                                 #address-cells = <1>;
 268                                 #size-cells = <0>;
 269                                 compatible = "fsl,gianfar-mdio";
 270                                 reg = <0x520 0x20>;
 271
 272                                 phy2: ethernet-phy@2 {
 273                                         interrupt-parent = <&ipic>;
 274                                         interrupts = <17 0x8>;
 275                                         reg = <0x2>;
 276                                 };
 277
 278                                 tbi0: tbi-phy@11 {
 279                                         reg = <0x11>;
 280                                         device_type = "tbi-phy";
 281                                 };
 282                         };
 283                 };
 284
 285                 enet1: ethernet@25000 {
 286                         #address-cells = <1>;
 287                         #size-cells = <1>;
 288                         cell-index = <1>;
 289                         device_type = "network";
 290                         model = "eTSEC";
 291                         compatible = "gianfar";
 292                         reg = <0x25000 0x1000>;
 293                         ranges = <0x0 0x25000 0x1000>;
 294                         local-mac-address = [ 00 00 00 00 00 00 ];
 295                         interrupts = <35 0x8 36 0x8 37 0x8>;
 296                         phy-connection-type = "mii";
 297                         interrupt-parent = <&ipic>;
 298                         fixed-link = <1 1 1000 0 0>;
 299                         tbi-handle = <&tbi1>;
 300                         sleep = <&pmc 0x30000000>;
 301                         fsl,magic-packet;
 302
 303                         mdio@520 {
 304                                 #address-cells = <1>;
 305                                 #size-cells = <0>;
 306                                 compatible = "fsl,gianfar-tbi";
 307                                 reg = <0x520 0x20>;
 308
 309                                 tbi1: tbi-phy@11 {
 310                                         reg = <0x11>;
 311                                         device_type = "tbi-phy";
 312                                 };
 313                         };
 314                 };
 315
 316                 serial0: serial@4500 {
 317                         cell-index = <0>;
 318                         device_type = "serial";
 319                         compatible = "fsl,ns16550", "ns16550";
 320                         reg = <0x4500 0x100>;
 321                         clock-frequency = <0>;
 322                         interrupts = <9 0x8>;
 323                         interrupt-parent = <&ipic>;
 324                 };
 325
 326                 serial1: serial@4600 {
 327                         cell-index = <1>;
 328                         device_type = "serial";
 329                         compatible = "fsl,ns16550", "ns16550";
 330                         reg = <0x4600 0x100>;
 331                         clock-frequency = <0>;
 332                         interrupts = <10 0x8>;
 333                         interrupt-parent = <&ipic>;
 334                 };
 335
 336                 crypto@30000 {
 337                         compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
 338                                      "fsl,sec2.1", "fsl,sec2.0";
 339                         reg = <0x30000 0x10000>;
 340                         interrupts = <11 0x8>;
 341                         interrupt-parent = <&ipic>;
 342                         fsl,num-channels = <4>;
 343                         fsl,channel-fifo-len = <24>;
 344                         fsl,exec-units-mask = <0x9fe>;
 345                         fsl,descriptor-types-mask = <0x3ab0ebf>;
 346                         sleep = <&pmc 0x03000000>;
 347                 };
 348
 349                 sata@18000 {
 350                         compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
 351                         reg = <0x18000 0x1000>;
 352                         interrupts = <44 0x8>;
 353                         interrupt-parent = <&ipic>;
 354                         sleep = <&pmc 0x000000c0>;
 355                 };
 356
 357                 sata@19000 {
 358                         compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
 359                         reg = <0x19000 0x1000>;
 360                         interrupts = <45 0x8>;
 361                         interrupt-parent = <&ipic>;
 362                         sleep = <&pmc 0x00000030>;
 363                 };
 364
 365                 /* IPIC
 366                  * interrupts cell = <intr #, sense>
 367                  * sense values match linux IORESOURCE_IRQ_* defines:
 368                  * sense == 8: Level, low assertion
 369                  * sense == 2: Edge, high-to-low change
 370                  */
 371                 ipic: interrupt-controller@700 {
 372                         compatible = "fsl,ipic";
 373                         interrupt-controller;
 374                         #address-cells = <0>;
 375                         #interrupt-cells = <2>;
 376                         reg = <0x700 0x100>;
 377                 };
 378
 379                 pmc: power@b00 {
 380                         compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
 381                         reg = <0xb00 0x100 0xa00 0x100>;
 382                         interrupts = <80 0x8>;
 383                         interrupt-parent = <&ipic>;
 384                 };
 385         };
 386
 387         pci0: pci@e0008500 {
 388                 interrupt-map-mask = <0xf800 0 0 7>;
 389                 interrupt-map = <
 390                                 /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
 391
 392                                 /* IDSEL AD14 IRQ6 inta */
 393                                  0x7000 0x0 0x0 0x1 &ipic 22 0x8
 394
 395                                 /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
 396                                  0x7800 0x0 0x0 0x1 &ipic 21 0x8
 397                                  0x7800 0x0 0x0 0x2 &ipic 22 0x8
 398                                  0x7800 0x0 0x0 0x4 &ipic 23 0x8
 399
 400                                 /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
 401                                  0xE000 0x0 0x0 0x1 &ipic 23 0x8
 402                                  0xE000 0x0 0x0 0x2 &ipic 21 0x8
 403                                  0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
 404                 interrupt-parent = <&ipic>;
 405                 interrupts = <66 0x8>;
 406                 bus-range = <0 0>;
 407                 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 408                           0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
 409                           0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
 410                 sleep = <&pmc 0x00010000>;
 411                 clock-frequency = <66666666>;
 412                 #interrupt-cells = <1>;
 413                 #size-cells = <2>;
 414                 #address-cells = <3>;
 415                 reg = <0xe0008500 0x100         /* internal registers */
 416                        0xe0008300 0x8>;         /* config space access registers */
 417                 compatible = "fsl,mpc8349-pci";
 418                 device_type = "pci";
 419         };
 420
 421         pci1: pcie@e0009000 {
 422                 #address-cells = <3>;
 423                 #size-cells = <2>;
 424                 #interrupt-cells = <1>;
 425                 device_type = "pci";
 426                 compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
 427                 reg = <0xe0009000 0x00001000>;
 428                 ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
 429                           0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
 430                 bus-range = <0 255>;
 431                 interrupt-map-mask = <0xf800 0 0 7>;
 432                 interrupt-map = <0 0 0 1 &ipic 1 8
 433                                  0 0 0 2 &ipic 1 8
 434                                  0 0 0 3 &ipic 1 8
 435                                  0 0 0 4 &ipic 1 8>;
 436                 sleep = <&pmc 0x00300000>;
 437                 clock-frequency = <0>;
 438
 439                 pcie@0 {
 440                         #address-cells = <3>;
 441                         #size-cells = <2>;
 442                         device_type = "pci";
 443                         reg = <0 0 0 0 0>;
 444                         ranges = <0x02000000 0 0xa8000000
 445                                   0x02000000 0 0xa8000000
 446                                   0 0x10000000
 447                                   0x01000000 0 0x00000000
 448                                   0x01000000 0 0x00000000
 449                                   0 0x00800000>;
 450                 };
 451         };
 452
 453         pci2: pcie@e000a000 {
 454                 #address-cells = <3>;
 455                 #size-cells = <2>;
 456                 #interrupt-cells = <1>;
 457                 device_type = "pci";
 458                 compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
 459                 reg = <0xe000a000 0x00001000>;
 460                 ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
 461                           0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
 462                 bus-range = <0 255>;
 463                 interrupt-map-mask = <0xf800 0 0 7>;
 464                 interrupt-map = <0 0 0 1 &ipic 2 8
 465                                  0 0 0 2 &ipic 2 8
 466                                  0 0 0 3 &ipic 2 8
 467                                  0 0 0 4 &ipic 2 8>;
 468                 sleep = <&pmc 0x000c0000>;
 469                 clock-frequency = <0>;
 470
 471                 pcie@0 {
 472                         #address-cells = <3>;
 473                         #size-cells = <2>;
 474                         device_type = "pci";
 475                         reg = <0 0 0 0 0>;
 476                         ranges = <0x02000000 0 0xc8000000
 477                                   0x02000000 0 0xc8000000
 478                                   0 0x10000000
 479                                   0x01000000 0 0x00000000
 480                                   0x01000000 0 0x00000000
 481                                   0 0x00800000>;
 482                 };
 483         };
 484
 485         leds {
 486                 compatible = "gpio-leds";
 487
 488                 pwr {
 489                         gpios = <&mcu_pio 0 0>;
 490                         default-state = "on";
 491                 };
 492
 493                 hdd {
 494                         gpios = <&mcu_pio 1 0>;
 495                         linux,default-trigger = "disk-activity";
 496                 };
 497         };
 498 };