2 * Keymile kmcoge4 Device Tree Source, based on the P2041RDB DTS
5 * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
7 * Copyright 2011 Freescale Semiconductor Inc.
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License as published by the
11 * Free Software Foundation; either version 2 of the License, or (at your
12 * option) any later version.
15 /include/ "p2041si-pre.dtsi"
18 model = "keymile,kmcoge4";
19 compatible = "keymile,kmcoge4", "keymile,kmp204x";
22 interrupt-parent = <&mpic>;
25 device_type = "memory";
33 bman_fbpr: bman-fbpr {
35 alignment = <0 0x1000000>;
39 alignment = <0 0x400000>;
41 qman_pfdr: qman-pfdr {
43 alignment = <0 0x2000000>;
47 dcsr: dcsr@f00000000 {
48 ranges = <0x00000000 0xf 0x00000000 0x01008000>;
51 bportals: bman-portals@ff4000000 {
52 ranges = <0x0 0xf 0xf4000000 0x200000>;
55 qportals: qman-portals@ff4200000 {
56 ranges = <0x0 0xf 0xf4200000 0x200000>;
60 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
61 reg = <0xf 0xfe000000 0 0x00001000>;
66 compatible = "spansion,s25fl256s1", "jedec,spi-nor";
68 spi-max-frequency = <20000000>; /* input clock */
72 compatible = "zarlink,zl30343";
74 spi-max-frequency = <8000000>;
80 compatible = "micron,m25p32", "jedec,spi-nor";
82 spi-max-frequency = <15000000>;
115 enet0: ethernet@e0000 {
116 phy-connection-type = "sgmii";
123 front_phy: ethernet-phy@11 {
128 enet1: ethernet@e2000 {
129 phy-connection-type = "sgmii";
135 enet2: ethernet@e4000 {
139 enet3: ethernet@e6000 {
142 enet4: ethernet@e8000 {
143 phy-handle = <&front_phy>;
144 phy-connection-type = "rgmii";
146 enet5: ethernet@f0000 {
152 rio: rapidio@ffe0c0000 {
156 lbc: localbus@ffe124000 {
157 reg = <0xf 0xfe124000 0 0x1000>;
158 ranges = <0 0 0xf 0xffa00000 0x00040000 /* LB 0 */
159 1 0 0xf 0xfb000000 0x00010000 /* LB 1 */
160 2 0 0xf 0xd0000000 0x10000000 /* LB 2 */
161 3 0 0xf 0xe0000000 0x10000000>; /* LB 3 */
164 #address-cells = <1>;
166 compatible = "fsl,elbc-fcm-nand";
171 compatible = "keymile,qriox";
176 compatible = "keymile,bfticu";
177 interrupt-controller;
178 #interrupt-cells = <2>;
180 interrupt-parent = <&mpic>;
181 interrupts = <6 1 0 0>;
185 pci0: pcie@ffe200000 {
186 reg = <0xf 0xfe200000 0 0x1000>;
187 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
188 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
190 ranges = <0x02000000 0 0xe0000000
191 0x02000000 0 0xe0000000
194 0x01000000 0 0x00000000
195 0x01000000 0 0x00000000
200 pci1: pcie@ffe201000 {
204 pci2: pcie@ffe202000 {
205 reg = <0xf 0xfe202000 0 0x1000>;
206 ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
207 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
209 ranges = <0x02000000 0 0xe0000000
210 0x02000000 0 0xe0000000
213 0x01000000 0 0x00000000
214 0x01000000 0 0x00000000
220 /include/ "p2041si-post.dtsi"