2 * GE SBC610 Device Tree Source
4 * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
11 * Based on: SBS CM6 Device Tree Source
12 * Copyright 2007 SBS Technologies GmbH & Co. KG
13 * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
14 * Copyright 2006 Freescale Semiconductor Inc.
18 * Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts
21 /include/ "mpc8641si-pre.dtsi"
25 compatible = "gef,sbc610";
28 device_type = "memory";
29 reg = <0x0 0x40000000>; // set by uboot
32 lbc: localbus@fef05000 {
33 reg = <0xfef05000 0x1000>;
35 ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
36 1 0 0xe8000000 0x08000000 // Paged Flash 0
37 2 0 0xe0000000 0x08000000 // Paged Flash 1
38 3 0 0xfc100000 0x00020000 // NVRAM
39 4 0 0xfc000000 0x00008000 // FPGA
40 5 0 0xfc008000 0x00008000 // AFIX FPGA
41 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit)
42 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit)
44 /* flash@0,0 is a mirror of part of the memory in flash@1,0
46 compatible = "gef,sbc610-firmware-mirror", "cfi-flash";
47 reg = <0x0 0x0 0x1000000>;
54 reg = <0x0 0x1000000>;
61 compatible = "gef,sbc610-paged-flash", "cfi-flash";
62 reg = <0x1 0x0 0x8000000>;
69 reg = <0x0 0x7800000>;
73 reg = <0x7800000 0x800000>;
79 device_type = "nvram";
80 compatible = "simtek,stk14ca8";
81 reg = <0x3 0x0 0x20000>;
85 compatible = "gef,fpga-regs";
90 compatible = "gef,fpga-wdt";
91 reg = <0x4 0x2000 0x8>;
92 interrupts = <0x1a 0x4>;
93 interrupt-parent = <&gef_pic>;
95 /* Second watchdog available, driver currently supports one.
97 compatible = "gef,fpga-wdt";
98 reg = <0x4 0x2010 0x8>;
99 interrupts = <0x1b 0x4>;
100 interrupt-parent = <&gef_pic>;
103 gef_pic: pic@4,4000 {
104 #interrupt-cells = <1>;
105 interrupt-controller;
106 compatible = "gef,fpga-pic";
107 reg = <0x4 0x4000 0x20>;
108 interrupts = <0x8 0x9 0 0>;
111 gef_gpio: gpio@7,14000 {
113 compatible = "gef,sbc610-gpio";
114 reg = <0x7 0x14000 0x24>;
120 ranges = <0x0 0xfef00000 0x00100000>;
124 compatible = "national,lm92";
129 compatible = "adi,adt7461";
134 compatible = "epson,rx8581";
139 compatible = "dallas,ds1682";
144 enet0: ethernet@24000 {
145 tbi-handle = <&tbi0>;
146 phy-handle = <&phy0>;
147 phy-connection-type = "gmii";
151 phy0: ethernet-phy@0 {
152 interrupt-parent = <&gef_pic>;
153 interrupts = <0x9 0x4>;
156 phy2: ethernet-phy@2 {
157 interrupt-parent = <&gef_pic>;
158 interrupts = <0x8 0x4>;
163 device_type = "tbi-phy";
167 enet1: ethernet@26000 {
168 tbi-handle = <&tbi2>;
169 phy-handle = <&phy2>;
170 phy-connection-type = "gmii";
176 device_type = "tbi-phy";
180 enet2: ethernet@25000 {
188 enet3: ethernet@27000 {
197 pci0: pcie@fef08000 {
198 reg = <0xfef08000 0x1000>;
199 ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
200 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
203 ranges = <0x02000000 0x0 0x80000000
204 0x02000000 0x0 0x80000000
207 0x01000000 0x0 0x00000000
208 0x01000000 0x0 0x00000000
213 pci1: pcie@fef09000 {
218 /include/ "mpc8641si-post.dtsi"