arch/powerpc/boot/dts/charon.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * charon board Device Tree Source
   4  *
   5  * Copyright (C) 2007 Semihalf
   6  * Marian Balakowicz <m8@semihalf.com>
   7  *
   8  * Copyright (C) 2010 DENX Software Engineering GmbH
   9  * Heiko Schocher <hs@denx.de>
  10  */
  11
  12 /dts-v1/;
  13
  14 / {
  15         model = "anon,charon";
  16         compatible = "anon,charon";
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19         interrupt-parent = <&mpc5200_pic>;
  20
  21         cpus {
  22                 #address-cells = <1>;
  23                 #size-cells = <0>;
  24
  25                 PowerPC,5200@0 {
  26                         device_type = "cpu";
  27                         reg = <0>;
  28                         d-cache-line-size = <32>;
  29                         i-cache-line-size = <32>;
  30                         d-cache-size = <0x4000>;        // L1, 16K
  31                         i-cache-size = <0x4000>;        // L1, 16K
  32                         timebase-frequency = <0>;       // from bootloader
  33                         bus-frequency = <0>;            // from bootloader
  34                         clock-frequency = <0>;          // from bootloader
  35                 };
  36         };
  37
  38         memory@0 {
  39                 device_type = "memory";
  40                 reg = <0x00000000 0x08000000>;  // 128MB
  41         };
  42
  43         soc5200@f0000000 {
  44                 #address-cells = <1>;
  45                 #size-cells = <1>;
  46                 compatible = "fsl,mpc5200-immr";
  47                 ranges = <0 0xf0000000 0x0000c000>;
  48                 reg = <0xf0000000 0x00000100>;
  49                 bus-frequency = <0>;            // from bootloader
  50                 system-frequency = <0>;         // from bootloader
  51
  52                 cdm@200 {
  53                         compatible = "fsl,mpc5200-cdm";
  54                         reg = <0x200 0x38>;
  55                 };
  56
  57                 mpc5200_pic: interrupt-controller@500 {
  58                         // 5200 interrupts are encoded into two levels;
  59                         interrupt-controller;
  60                         #interrupt-cells = <3>;
  61                         compatible = "fsl,mpc5200-pic";
  62                         reg = <0x500 0x80>;
  63                 };
  64
  65                 timer@600 {     // General Purpose Timer
  66                         compatible = "fsl,mpc5200-gpt";
  67                         reg = <0x600 0x10>;
  68                         interrupts = <1 9 0>;
  69                         fsl,has-wdt;
  70                 };
  71
  72                 can@900 {
  73                         compatible = "fsl,mpc5200-mscan";
  74                         interrupts = <2 17 0>;
  75                         reg = <0x900 0x80>;
  76                 };
  77
  78                 can@980 {
  79                         compatible = "fsl,mpc5200-mscan";
  80                         interrupts = <2 18 0>;
  81                         reg = <0x980 0x80>;
  82                 };
  83
  84                 gpio_simple: gpio@b00 {
  85                         compatible = "fsl,mpc5200-gpio";
  86                         reg = <0xb00 0x40>;
  87                         interrupts = <1 7 0>;
  88                         gpio-controller;
  89                         #gpio-cells = <2>;
  90                 };
  91
  92                 usb@1000 {
  93                         compatible = "fsl,mpc5200-ohci","ohci-be";
  94                         reg = <0x1000 0xff>;
  95                         interrupts = <2 6 0>;
  96                 };
  97
  98                 dma-controller@1200 {
  99                         device_type = "dma-controller";
 100                         compatible = "fsl,mpc5200-bestcomm";
 101                         reg = <0x1200 0x80>;
 102                         interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
 103                                       3 4 0  3 5 0  3 6 0  3 7 0
 104                                       3 8 0  3 9 0  3 10 0  3 11 0
 105                                       3 12 0  3 13 0  3 14 0  3 15 0>;
 106                 };
 107
 108                 xlb@1f00 {
 109                         compatible = "fsl,mpc5200-xlb";
 110                         reg = <0x1f00 0x100>;
 111                 };
 112
 113                 serial@2000 {           // PSC1
 114                         compatible = "fsl,mpc5200-psc-uart";
 115                         reg = <0x2000 0x100>;
 116                         interrupts = <2 1 0>;
 117                 };
 118
 119                 serial@2400 {           // PSC3
 120                         compatible = "fsl,mpc5200-psc-uart";
 121                         reg = <0x2400 0x100>;
 122                         interrupts = <2 3 0>;
 123                 };
 124
 125                 ethernet@3000 {
 126                         compatible = "fsl,mpc5200-fec";
 127                         reg = <0x3000 0x400>;
 128                         local-mac-address = [ 00 00 00 00 00 00 ];
 129                         interrupts = <2 5 0>;
 130                         fixed-link = <1 1 100 0 0>;
 131                 };
 132
 133                 mdio@3000 {
 134                         #address-cells = <1>;
 135                         #size-cells = <0>;
 136                         compatible = "fsl,mpc5200-mdio";
 137                         reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
 138                         interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
 139                 };
 140
 141                 ata@3a00 {
 142                         compatible = "fsl,mpc5200-ata";
 143                         reg = <0x3a00 0x100>;
 144                         interrupts = <2 7 0>;
 145                 };
 146
 147                 i2c@3d00 {
 148                         #address-cells = <1>;
 149                         #size-cells = <0>;
 150                         compatible = "fsl,mpc5200-i2c","fsl-i2c";
 151                         reg = <0x3d00 0x40>;
 152                         interrupts = <2 15 0>;
 153                 };
 154
 155
 156                 i2c@3d40 {
 157                         #address-cells = <1>;
 158                         #size-cells = <0>;
 159                         compatible = "fsl,mpc5200-i2c","fsl-i2c";
 160                         reg = <0x3d40 0x40>;
 161                         interrupts = <2 16 0>;
 162
 163                         dtt@28 {
 164                                 compatible = "national,lm80";
 165                                 reg = <0x28>;
 166                         };
 167
 168                         rtc@68 {
 169                                 compatible = "dallas,ds1374";
 170                                 reg = <0x68>;
 171                         };
 172                 };
 173
 174                 sram@8000 {
 175                         compatible = "fsl,mpc5200-sram";
 176                         reg = <0x8000 0x4000>;
 177                 };
 178         };
 179
 180         localbus {
 181                 compatible = "fsl,mpc5200-lpb","simple-bus";
 182                 #address-cells = <2>;
 183                 #size-cells = <1>;
 184                 ranges = <      0 0 0xfc000000 0x02000000
 185                                 1 0 0xe0000000 0x04000000 // CS1 range, SM501
 186                                 3 0 0xe8000000 0x00080000>;
 187
 188                 flash@0,0 {
 189                         compatible = "cfi-flash";
 190                         reg = <0 0 0x02000000>;
 191                         bank-width = <4>;
 192                         device-width = <2>;
 193                         #size-cells = <1>;
 194                         #address-cells = <1>;
 195                 };
 196
 197                 display@1,0 {
 198                         compatible = "smi,sm501";
 199                         reg = <1 0x00000000 0x00800000
 200                                1 0x03e00000 0x00200000>;
 201                         mode = "640x480-32@60";
 202                         interrupts = <1 1 3>;
 203                         little-endian;
 204                 };
 205
 206                 mram0@3,0 {
 207                         compatible = "mtd-ram";
 208                         reg = <3 0x00000 0x80000>;
 209                         bank-width = <1>;
 210                 };
 211         };
 212
 213         pci@f0000d00 {
 214                 #interrupt-cells = <1>;
 215                 #size-cells = <2>;
 216                 #address-cells = <3>;
 217                 device_type = "pci";
 218                 compatible = "fsl,mpc5200-pci";
 219                 reg = <0xf0000d00 0x100>;
 220                 interrupt-map-mask = <0xf800 0 0 7>;
 221                 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
 222                                  0xc000 0 0 2 &mpc5200_pic 0 0 3
 223                                  0xc000 0 0 3 &mpc5200_pic 0 0 3
 224                                  0xc000 0 0 4 &mpc5200_pic 0 0 3>;
 225                 clock-frequency = <0>; // From boot loader
 226                 interrupts = <2 8 0 2 9 0 2 10 0>;
 227                 bus-range = <0 0>;
 228                 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
 229                           0x02000000 0 0x90000000 0x90000000 0 0x10000000
 230                           0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
 231         };
 232 };