arch/mips/cavium-octeon/octeon-platform.c

   1 /*
   2  * This file is subject to the terms and conditions of the GNU General Public
   3  * License.  See the file "COPYING" in the main directory of this archive
   4  * for more details.
   5  *
   6  * Copyright (C) 2004-2017 Cavium, Inc.
   7  * Copyright (C) 2008 Wind River Systems
   8  */
   9
  10 #include <linux/etherdevice.h>
  11 #include <linux/of.h>
  12 #include <linux/of_platform.h>
  13 #include <linux/of_fdt.h>
  14 #include <linux/platform_device.h>
  15 #include <linux/libfdt.h>
  16
  17 #include <asm/octeon/octeon.h>
  18 #include <asm/octeon/cvmx-helper-board.h>
  19
  20 #ifdef CONFIG_USB
  21 #include <linux/usb/ehci_def.h>
  22 #include <linux/usb/ehci_pdriver.h>
  23 #include <linux/usb/ohci_pdriver.h>
  24 #include <asm/octeon/cvmx-uctlx-defs.h>
  25
  26 #define CVMX_UAHCX_EHCI_USBCMD  (CVMX_ADD_IO_SEG(0x00016F0000000010ull))
  27 #define CVMX_UAHCX_OHCI_USBCMD  (CVMX_ADD_IO_SEG(0x00016F0000000408ull))
  28
  29 static DEFINE_MUTEX(octeon2_usb_clocks_mutex);
  30
  31 static int octeon2_usb_clock_start_cnt;
  32
  33 static int __init octeon2_usb_reset(void)
  34 {
  35         union cvmx_uctlx_clk_rst_ctl clk_rst_ctl;
  36         u32 ucmd;
  37
  38         if (!OCTEON_IS_OCTEON2())
  39                 return 0;
  40
  41         clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0));
  42         if (clk_rst_ctl.s.hrst) {
  43                 ucmd = cvmx_read64_uint32(CVMX_UAHCX_EHCI_USBCMD);
  44                 ucmd &= ~CMD_RUN;
  45                 cvmx_write64_uint32(CVMX_UAHCX_EHCI_USBCMD, ucmd);
  46                 mdelay(2);
  47                 ucmd |= CMD_RESET;
  48                 cvmx_write64_uint32(CVMX_UAHCX_EHCI_USBCMD, ucmd);
  49                 ucmd = cvmx_read64_uint32(CVMX_UAHCX_OHCI_USBCMD);
  50                 ucmd |= CMD_RUN;
  51                 cvmx_write64_uint32(CVMX_UAHCX_OHCI_USBCMD, ucmd);
  52         }
  53
  54         return 0;
  55 }
  56 arch_initcall(octeon2_usb_reset);
  57
  58 static void octeon2_usb_clocks_start(struct device *dev)
  59 {
  60         u64 div;
  61         union cvmx_uctlx_if_ena if_ena;
  62         union cvmx_uctlx_clk_rst_ctl clk_rst_ctl;
  63         union cvmx_uctlx_uphy_portx_ctl_status port_ctl_status;
  64         int i;
  65         unsigned long io_clk_64_to_ns;
  66         u32 clock_rate = 12000000;
  67         bool is_crystal_clock = false;
  68
  69
  70         mutex_lock(&octeon2_usb_clocks_mutex);
  71
  72         octeon2_usb_clock_start_cnt++;
  73         if (octeon2_usb_clock_start_cnt != 1)
  74                 goto exit;
  75
  76         io_clk_64_to_ns = 64000000000ull / octeon_get_io_clock_rate();
  77
  78         if (dev->of_node) {
  79                 struct device_node *uctl_node;
  80                 const char *clock_type;
  81
  82                 uctl_node = of_get_parent(dev->of_node);
  83                 if (!uctl_node) {
  84                         dev_err(dev, "No UCTL device node\n");
  85                         goto exit;
  86                 }
  87                 i = of_property_read_u32(uctl_node,
  88                                          "refclk-frequency", &clock_rate);
  89                 if (i) {
  90                         dev_err(dev, "No UCTL \"refclk-frequency\"\n");
  91                         of_node_put(uctl_node);
  92                         goto exit;
  93                 }
  94                 i = of_property_read_string(uctl_node,
  95                                             "refclk-type", &clock_type);
  96                 of_node_put(uctl_node);
  97                 if (!i && strcmp("crystal", clock_type) == 0)
  98                         is_crystal_clock = true;
  99         }
 100
 101         /*
 102          * Step 1: Wait for voltages stable.  That surely happened
 103          * before starting the kernel.
 104          *
 105          * Step 2: Enable  SCLK of UCTL by writing UCTL0_IF_ENA[EN] = 1
 106          */
 107         if_ena.u64 = 0;
 108         if_ena.s.en = 1;
 109         cvmx_write_csr(CVMX_UCTLX_IF_ENA(0), if_ena.u64);
 110
 111         for (i = 0; i <= 1; i++) {
 112                 port_ctl_status.u64 =
 113                         cvmx_read_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0));
 114                 /* Set txvreftune to 15 to obtain compliant 'eye' diagram. */
 115                 port_ctl_status.s.txvreftune = 15;
 116                 port_ctl_status.s.txrisetune = 1;
 117                 port_ctl_status.s.txpreemphasistune = 1;
 118                 cvmx_write_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0),
 119                                port_ctl_status.u64);
 120         }
 121
 122         /* Step 3: Configure the reference clock, PHY, and HCLK */
 123         clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0));
 124
 125         /*
 126          * If the UCTL looks like it has already been started, skip
 127          * the initialization, otherwise bus errors are obtained.
 128          */
 129         if (clk_rst_ctl.s.hrst)
 130                 goto end_clock;
 131         /* 3a */
 132         clk_rst_ctl.s.p_por = 1;
 133         clk_rst_ctl.s.hrst = 0;
 134         clk_rst_ctl.s.p_prst = 0;
 135         clk_rst_ctl.s.h_clkdiv_rst = 0;
 136         clk_rst_ctl.s.o_clkdiv_rst = 0;
 137         clk_rst_ctl.s.h_clkdiv_en = 0;
 138         clk_rst_ctl.s.o_clkdiv_en = 0;
 139         cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
 140
 141         /* 3b */
 142         clk_rst_ctl.s.p_refclk_sel = is_crystal_clock ? 0 : 1;
 143         switch (clock_rate) {
 144         default:
 145                 pr_err("Invalid UCTL clock rate of %u, using 12000000 instead\n",
 146                         clock_rate);
 147                 fallthrough;
 148         case 12000000:
 149                 clk_rst_ctl.s.p_refclk_div = 0;
 150                 break;
 151         case 24000000:
 152                 clk_rst_ctl.s.p_refclk_div = 1;
 153                 break;
 154         case 48000000:
 155                 clk_rst_ctl.s.p_refclk_div = 2;
 156                 break;
 157         }
 158         cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
 159
 160         /* 3c */
 161         div = octeon_get_io_clock_rate() / 130000000ull;
 162
 163         switch (div) {
 164         case 0:
 165                 div = 1;
 166                 break;
 167         case 1:
 168         case 2:
 169         case 3:
 170         case 4:
 171                 break;
 172         case 5:
 173                 div = 4;
 174                 break;
 175         case 6:
 176         case 7:
 177                 div = 6;
 178                 break;
 179         case 8:
 180         case 9:
 181         case 10:
 182         case 11:
 183                 div = 8;
 184                 break;
 185         default:
 186                 div = 12;
 187                 break;
 188         }
 189         clk_rst_ctl.s.h_div = div;
 190         cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
 191         /* Read it back, */
 192         clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0));
 193         clk_rst_ctl.s.h_clkdiv_en = 1;
 194         cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
 195         /* 3d */
 196         clk_rst_ctl.s.h_clkdiv_rst = 1;
 197         cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
 198
 199         /* 3e: delay 64 io clocks */
 200         ndelay(io_clk_64_to_ns);
 201
 202         /*
 203          * Step 4: Program the power-on reset field in the UCTL
 204          * clock-reset-control register.
 205          */
 206         clk_rst_ctl.s.p_por = 0;
 207         cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
 208
 209         /* Step 5:    Wait 3 ms for the PHY clock to start. */
 210         mdelay(3);
 211
 212         /* Steps 6..9 for ATE only, are skipped. */
 213
 214         /* Step 10: Configure the OHCI_CLK48 and OHCI_CLK12 clocks. */
 215         /* 10a */
 216         clk_rst_ctl.s.o_clkdiv_rst = 1;
 217         cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
 218
 219         /* 10b */
 220         clk_rst_ctl.s.o_clkdiv_en = 1;
 221         cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
 222
 223         /* 10c */
 224         ndelay(io_clk_64_to_ns);
 225
 226         /*
 227          * Step 11: Program the PHY reset field:
 228          * UCTL0_CLK_RST_CTL[P_PRST] = 1
 229          */
 230         clk_rst_ctl.s.p_prst = 1;
 231         cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
 232
 233         /* Step 11b */
 234         udelay(1);
 235
 236         /* Step 11c */
 237         clk_rst_ctl.s.p_prst = 0;
 238         cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
 239
 240         /* Step 11d */
 241         mdelay(1);
 242
 243         /* Step 11e */
 244         clk_rst_ctl.s.p_prst = 1;
 245         cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
 246
 247         /* Step 12: Wait 1 uS. */
 248         udelay(1);
 249
 250         /* Step 13: Program the HRESET_N field: UCTL0_CLK_RST_CTL[HRST] = 1 */
 251         clk_rst_ctl.s.hrst = 1;
 252         cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64);
 253
 254 end_clock:
 255         /* Set uSOF cycle period to 60,000 bits. */
 256         cvmx_write_csr(CVMX_UCTLX_EHCI_FLA(0), 0x20ull);
 257
 258 exit:
 259         mutex_unlock(&octeon2_usb_clocks_mutex);
 260 }
 261
 262 static void octeon2_usb_clocks_stop(void)
 263 {
 264         mutex_lock(&octeon2_usb_clocks_mutex);
 265         octeon2_usb_clock_start_cnt--;
 266         mutex_unlock(&octeon2_usb_clocks_mutex);
 267 }
 268
 269 static int octeon_ehci_power_on(struct platform_device *pdev)
 270 {
 271         octeon2_usb_clocks_start(&pdev->dev);
 272         return 0;
 273 }
 274
 275 static void octeon_ehci_power_off(struct platform_device *pdev)
 276 {
 277         octeon2_usb_clocks_stop();
 278 }
 279
 280 static struct usb_ehci_pdata octeon_ehci_pdata = {
 281         /* Octeon EHCI matches CPU endianness. */
 282 #ifdef __BIG_ENDIAN
 283         .big_endian_mmio        = 1,
 284 #endif
 285         /*
 286          * We can DMA from anywhere. But the descriptors must be in
 287          * the lower 4GB.
 288          */
 289         .dma_mask_64    = 0,
 290         .power_on       = octeon_ehci_power_on,
 291         .power_off      = octeon_ehci_power_off,
 292 };
 293
 294 static void __init octeon_ehci_hw_start(struct device *dev)
 295 {
 296         union cvmx_uctlx_ehci_ctl ehci_ctl;
 297
 298         octeon2_usb_clocks_start(dev);
 299
 300         ehci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_EHCI_CTL(0));
 301         /* Use 64-bit addressing. */
 302         ehci_ctl.s.ehci_64b_addr_en = 1;
 303         ehci_ctl.s.l2c_addr_msb = 0;
 304 #ifdef __BIG_ENDIAN
 305         ehci_ctl.s.l2c_buff_emod = 1; /* Byte swapped. */
 306         ehci_ctl.s.l2c_desc_emod = 1; /* Byte swapped. */
 307 #else
 308         ehci_ctl.s.l2c_buff_emod = 0; /* not swapped. */
 309         ehci_ctl.s.l2c_desc_emod = 0; /* not swapped. */
 310         ehci_ctl.s.inv_reg_a2 = 1;
 311 #endif
 312         cvmx_write_csr(CVMX_UCTLX_EHCI_CTL(0), ehci_ctl.u64);
 313
 314         octeon2_usb_clocks_stop();
 315 }
 316
 317 static int __init octeon_ehci_device_init(void)
 318 {
 319         struct platform_device *pd;
 320         struct device_node *ehci_node;
 321         int ret = 0;
 322
 323         ehci_node = of_find_node_by_name(NULL, "ehci");
 324         if (!ehci_node)
 325                 return 0;
 326
 327         pd = of_find_device_by_node(ehci_node);
 328         of_node_put(ehci_node);
 329         if (!pd)
 330                 return 0;
 331
 332         pd->dev.platform_data = &octeon_ehci_pdata;
 333         octeon_ehci_hw_start(&pd->dev);
 334         put_device(&pd->dev);
 335
 336         return ret;
 337 }
 338 device_initcall(octeon_ehci_device_init);
 339
 340 static int octeon_ohci_power_on(struct platform_device *pdev)
 341 {
 342         octeon2_usb_clocks_start(&pdev->dev);
 343         return 0;
 344 }
 345
 346 static void octeon_ohci_power_off(struct platform_device *pdev)
 347 {
 348         octeon2_usb_clocks_stop();
 349 }
 350
 351 static struct usb_ohci_pdata octeon_ohci_pdata = {
 352         /* Octeon OHCI matches CPU endianness. */
 353 #ifdef __BIG_ENDIAN
 354         .big_endian_mmio        = 1,
 355 #endif
 356         .power_on       = octeon_ohci_power_on,
 357         .power_off      = octeon_ohci_power_off,
 358 };
 359
 360 static void __init octeon_ohci_hw_start(struct device *dev)
 361 {
 362         union cvmx_uctlx_ohci_ctl ohci_ctl;
 363
 364         octeon2_usb_clocks_start(dev);
 365
 366         ohci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_OHCI_CTL(0));
 367         ohci_ctl.s.l2c_addr_msb = 0;
 368 #ifdef __BIG_ENDIAN
 369         ohci_ctl.s.l2c_buff_emod = 1; /* Byte swapped. */
 370         ohci_ctl.s.l2c_desc_emod = 1; /* Byte swapped. */
 371 #else
 372         ohci_ctl.s.l2c_buff_emod = 0; /* not swapped. */
 373         ohci_ctl.s.l2c_desc_emod = 0; /* not swapped. */
 374         ohci_ctl.s.inv_reg_a2 = 1;
 375 #endif
 376         cvmx_write_csr(CVMX_UCTLX_OHCI_CTL(0), ohci_ctl.u64);
 377
 378         octeon2_usb_clocks_stop();
 379 }
 380
 381 static int __init octeon_ohci_device_init(void)
 382 {
 383         struct platform_device *pd;
 384         struct device_node *ohci_node;
 385         int ret = 0;
 386
 387         ohci_node = of_find_node_by_name(NULL, "ohci");
 388         if (!ohci_node)
 389                 return 0;
 390
 391         pd = of_find_device_by_node(ohci_node);
 392         of_node_put(ohci_node);
 393         if (!pd)
 394                 return 0;
 395
 396         pd->dev.platform_data = &octeon_ohci_pdata;
 397         octeon_ohci_hw_start(&pd->dev);
 398         put_device(&pd->dev);
 399
 400         return ret;
 401 }
 402 device_initcall(octeon_ohci_device_init);
 403
 404 #endif /* CONFIG_USB */
 405
 406 /* Octeon Random Number Generator.  */
 407 static int __init octeon_rng_device_init(void)
 408 {
 409         struct platform_device *pd;
 410         int ret = 0;
 411
 412         struct resource rng_resources[] = {
 413                 {
 414                         .flags  = IORESOURCE_MEM,
 415                         .start  = XKPHYS_TO_PHYS(CVMX_RNM_CTL_STATUS),
 416                         .end    = XKPHYS_TO_PHYS(CVMX_RNM_CTL_STATUS) + 0xf
 417                 }, {
 418                         .flags  = IORESOURCE_MEM,
 419                         .start  = cvmx_build_io_address(8, 0),
 420                         .end    = cvmx_build_io_address(8, 0) + 0x7
 421                 }
 422         };
 423
 424         pd = platform_device_alloc("octeon_rng", -1);
 425         if (!pd) {
 426                 ret = -ENOMEM;
 427                 goto out;
 428         }
 429
 430         ret = platform_device_add_resources(pd, rng_resources,
 431                                             ARRAY_SIZE(rng_resources));
 432         if (ret)
 433                 goto fail;
 434
 435         ret = platform_device_add(pd);
 436         if (ret)
 437                 goto fail;
 438
 439         return ret;
 440 fail:
 441         platform_device_put(pd);
 442
 443 out:
 444         return ret;
 445 }
 446 device_initcall(octeon_rng_device_init);
 447
 448 static const struct of_device_id octeon_ids[] __initconst = {
 449         { .compatible = "simple-bus", },
 450         { .compatible = "cavium,octeon-6335-uctl", },
 451         { .compatible = "cavium,octeon-5750-usbn", },
 452         { .compatible = "cavium,octeon-3860-bootbus", },
 453         { .compatible = "cavium,mdio-mux", },
 454         { .compatible = "gpio-leds", },
 455         {},
 456 };
 457
 458 static bool __init octeon_has_88e1145(void)
 459 {
 460         return !OCTEON_IS_MODEL(OCTEON_CN52XX) &&
 461                !OCTEON_IS_MODEL(OCTEON_CN6XXX) &&
 462                !OCTEON_IS_MODEL(OCTEON_CN56XX);
 463 }
 464
 465 static bool __init octeon_has_fixed_link(int ipd_port)
 466 {
 467         switch (cvmx_sysinfo_get()->board_type) {
 468         case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
 469         case CVMX_BOARD_TYPE_CN3010_EVB_HS5:
 470         case CVMX_BOARD_TYPE_CN3020_EVB_HS5:
 471         case CVMX_BOARD_TYPE_CUST_NB5:
 472         case CVMX_BOARD_TYPE_EBH3100:
 473                 /* Port 1 on these boards is always gigabit. */
 474                 return ipd_port == 1;
 475         case CVMX_BOARD_TYPE_BBGW_REF:
 476                 /* Ports 0 and 1 connect to the switch. */
 477                 return ipd_port == 0 || ipd_port == 1;
 478         }
 479         return false;
 480 }
 481
 482 static void __init octeon_fdt_set_phy(int eth, int phy_addr)
 483 {
 484         const __be32 *phy_handle;
 485         const __be32 *alt_phy_handle;
 486         const __be32 *reg;
 487         u32 phandle;
 488         int phy;
 489         int alt_phy;
 490         const char *p;
 491         int current_len;
 492         char new_name[20];
 493
 494         phy_handle = fdt_getprop(initial_boot_params, eth, "phy-handle", NULL);
 495         if (!phy_handle)
 496                 return;
 497
 498         phandle = be32_to_cpup(phy_handle);
 499         phy = fdt_node_offset_by_phandle(initial_boot_params, phandle);
 500
 501         alt_phy_handle = fdt_getprop(initial_boot_params, eth, "cavium,alt-phy-handle", NULL);
 502         if (alt_phy_handle) {
 503                 u32 alt_phandle = be32_to_cpup(alt_phy_handle);
 504
 505                 alt_phy = fdt_node_offset_by_phandle(initial_boot_params, alt_phandle);
 506         } else {
 507                 alt_phy = -1;
 508         }
 509
 510         if (phy_addr < 0 || phy < 0) {
 511                 /* Delete the PHY things */
 512                 fdt_nop_property(initial_boot_params, eth, "phy-handle");
 513                 /* This one may fail */
 514                 fdt_nop_property(initial_boot_params, eth, "cavium,alt-phy-handle");
 515                 if (phy >= 0)
 516                         fdt_nop_node(initial_boot_params, phy);
 517                 if (alt_phy >= 0)
 518                         fdt_nop_node(initial_boot_params, alt_phy);
 519                 return;
 520         }
 521
 522         if (phy_addr >= 256 && alt_phy > 0) {
 523                 const struct fdt_property *phy_prop;
 524                 struct fdt_property *alt_prop;
 525                 fdt32_t phy_handle_name;
 526
 527                 /* Use the alt phy node instead.*/
 528                 phy_prop = fdt_get_property(initial_boot_params, eth, "phy-handle", NULL);
 529                 phy_handle_name = phy_prop->nameoff;
 530                 fdt_nop_node(initial_boot_params, phy);
 531                 fdt_nop_property(initial_boot_params, eth, "phy-handle");
 532                 alt_prop = fdt_get_property_w(initial_boot_params, eth, "cavium,alt-phy-handle", NULL);
 533                 alt_prop->nameoff = phy_handle_name;
 534                 phy = alt_phy;
 535         }
 536
 537         phy_addr &= 0xff;
 538
 539         if (octeon_has_88e1145()) {
 540                 fdt_nop_property(initial_boot_params, phy, "marvell,reg-init");
 541                 memset(new_name, 0, sizeof(new_name));
 542                 strcpy(new_name, "marvell,88e1145");
 543                 p = fdt_getprop(initial_boot_params, phy, "compatible",
 544                                 &current_len);
 545                 if (p && current_len >= strlen(new_name))
 546                         fdt_setprop_inplace(initial_boot_params, phy,
 547                                         "compatible", new_name, current_len);
 548         }
 549
 550         reg = fdt_getprop(initial_boot_params, phy, "reg", NULL);
 551         if (phy_addr == be32_to_cpup(reg))
 552                 return;
 553
 554         fdt_setprop_inplace_cell(initial_boot_params, phy, "reg", phy_addr);
 555
 556         snprintf(new_name, sizeof(new_name), "ethernet-phy@%x", phy_addr);
 557
 558         p = fdt_get_name(initial_boot_params, phy, &current_len);
 559         if (p && current_len == strlen(new_name))
 560                 fdt_set_name(initial_boot_params, phy, new_name);
 561         else
 562                 pr_err("Error: could not rename ethernet phy: <%s>", p);
 563 }
 564
 565 static void __init octeon_fdt_set_mac_addr(int n, u64 *pmac)
 566 {
 567         const u8 *old_mac;
 568         int old_len;
 569         u8 new_mac[6];
 570         u64 mac = *pmac;
 571         int r;
 572
 573         old_mac = fdt_getprop(initial_boot_params, n, "local-mac-address",
 574                               &old_len);
 575         if (!old_mac || old_len != 6 || is_valid_ether_addr(old_mac))
 576                 return;
 577
 578         new_mac[0] = (mac >> 40) & 0xff;
 579         new_mac[1] = (mac >> 32) & 0xff;
 580         new_mac[2] = (mac >> 24) & 0xff;
 581         new_mac[3] = (mac >> 16) & 0xff;
 582         new_mac[4] = (mac >> 8) & 0xff;
 583         new_mac[5] = mac & 0xff;
 584
 585         r = fdt_setprop_inplace(initial_boot_params, n, "local-mac-address",
 586                                 new_mac, sizeof(new_mac));
 587
 588         if (r) {
 589                 pr_err("Setting \"local-mac-address\" failed %d", r);
 590                 return;
 591         }
 592         *pmac = mac + 1;
 593 }
 594
 595 static void __init octeon_fdt_rm_ethernet(int node)
 596 {
 597         const __be32 *phy_handle;
 598
 599         phy_handle = fdt_getprop(initial_boot_params, node, "phy-handle", NULL);
 600         if (phy_handle) {
 601                 u32 ph = be32_to_cpup(phy_handle);
 602                 int p = fdt_node_offset_by_phandle(initial_boot_params, ph);
 603
 604                 if (p >= 0)
 605                         fdt_nop_node(initial_boot_params, p);
 606         }
 607         fdt_nop_node(initial_boot_params, node);
 608 }
 609
 610 static void __init _octeon_rx_tx_delay(int eth, int rx_delay, int tx_delay)
 611 {
 612         fdt_setprop_inplace_cell(initial_boot_params, eth, "rx-delay",
 613                                  rx_delay);
 614         fdt_setprop_inplace_cell(initial_boot_params, eth, "tx-delay",
 615                                  tx_delay);
 616 }
 617
 618 static void __init octeon_rx_tx_delay(int eth, int iface, int port)
 619 {
 620         switch (cvmx_sysinfo_get()->board_type) {
 621         case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
 622                 if (iface == 0) {
 623                         if (port == 0) {
 624                                 /*
 625                                  * Boards with gigabit WAN ports need a
 626                                  * different setting that is compatible with
 627                                  * 100 Mbit settings
 628                                  */
 629                                 _octeon_rx_tx_delay(eth, 0xc, 0x0c);
 630                                 return;
 631                         } else if (port == 1) {
 632                                 /* Different config for switch port. */
 633                                 _octeon_rx_tx_delay(eth, 0x0, 0x0);
 634                                 return;
 635                         }
 636                 }
 637                 break;
 638         case CVMX_BOARD_TYPE_UBNT_E100:
 639                 if (iface == 0 && port <= 2) {
 640                         _octeon_rx_tx_delay(eth, 0x0, 0x10);
 641                         return;
 642                 }
 643                 break;
 644         }
 645         fdt_nop_property(initial_boot_params, eth, "rx-delay");
 646         fdt_nop_property(initial_boot_params, eth, "tx-delay");
 647 }
 648
 649 static void __init octeon_fdt_pip_port(int iface, int i, int p, int max)
 650 {
 651         char name_buffer[20];
 652         int eth;
 653         int phy_addr;
 654         int ipd_port;
 655         int fixed_link;
 656
 657         snprintf(name_buffer, sizeof(name_buffer), "ethernet@%x", p);
 658         eth = fdt_subnode_offset(initial_boot_params, iface, name_buffer);
 659         if (eth < 0)
 660                 return;
 661         if (p > max) {
 662                 pr_debug("Deleting port %x:%x\n", i, p);
 663                 octeon_fdt_rm_ethernet(eth);
 664                 return;
 665         }
 666         if (OCTEON_IS_MODEL(OCTEON_CN68XX))
 667                 ipd_port = (0x100 * i) + (0x10 * p) + 0x800;
 668         else
 669                 ipd_port = 16 * i + p;
 670
 671         phy_addr = cvmx_helper_board_get_mii_address(ipd_port);
 672         octeon_fdt_set_phy(eth, phy_addr);
 673
 674         fixed_link = fdt_subnode_offset(initial_boot_params, eth, "fixed-link");
 675         if (fixed_link < 0)
 676                 WARN_ON(octeon_has_fixed_link(ipd_port));
 677         else if (!octeon_has_fixed_link(ipd_port))
 678                 fdt_nop_node(initial_boot_params, fixed_link);
 679         octeon_rx_tx_delay(eth, i, p);
 680 }
 681
 682 static void __init octeon_fdt_pip_iface(int pip, int idx)
 683 {
 684         char name_buffer[20];
 685         int iface;
 686         int p;
 687         int count = 0;
 688
 689         snprintf(name_buffer, sizeof(name_buffer), "interface@%d", idx);
 690         iface = fdt_subnode_offset(initial_boot_params, pip, name_buffer);
 691         if (iface < 0)
 692                 return;
 693
 694         if (cvmx_helper_interface_enumerate(idx) == 0)
 695                 count = cvmx_helper_ports_on_interface(idx);
 696
 697         for (p = 0; p < 16; p++)
 698                 octeon_fdt_pip_port(iface, idx, p, count - 1);
 699 }
 700
 701 void __init octeon_fill_mac_addresses(void)
 702 {
 703         const char *alias_prop;
 704         char name_buffer[20];
 705         u64 mac_addr_base;
 706         int aliases;
 707         int pip;
 708         int i;
 709
 710         aliases = fdt_path_offset(initial_boot_params, "/aliases");
 711         if (aliases < 0)
 712                 return;
 713
 714         mac_addr_base =
 715                 ((octeon_bootinfo->mac_addr_base[0] & 0xffull)) << 40 |
 716                 ((octeon_bootinfo->mac_addr_base[1] & 0xffull)) << 32 |
 717                 ((octeon_bootinfo->mac_addr_base[2] & 0xffull)) << 24 |
 718                 ((octeon_bootinfo->mac_addr_base[3] & 0xffull)) << 16 |
 719                 ((octeon_bootinfo->mac_addr_base[4] & 0xffull)) << 8 |
 720                  (octeon_bootinfo->mac_addr_base[5] & 0xffull);
 721
 722         for (i = 0; i < 2; i++) {
 723                 int mgmt;
 724
 725                 snprintf(name_buffer, sizeof(name_buffer), "mix%d", i);
 726                 alias_prop = fdt_getprop(initial_boot_params, aliases,
 727                                          name_buffer, NULL);
 728                 if (!alias_prop)
 729                         continue;
 730                 mgmt = fdt_path_offset(initial_boot_params, alias_prop);
 731                 if (mgmt < 0)
 732                         continue;
 733                 octeon_fdt_set_mac_addr(mgmt, &mac_addr_base);
 734         }
 735
 736         alias_prop = fdt_getprop(initial_boot_params, aliases, "pip", NULL);
 737         if (!alias_prop)
 738                 return;
 739
 740         pip = fdt_path_offset(initial_boot_params, alias_prop);
 741         if (pip < 0)
 742                 return;
 743
 744         for (i = 0; i <= 4; i++) {
 745                 int iface;
 746                 int p;
 747
 748                 snprintf(name_buffer, sizeof(name_buffer), "interface@%d", i);
 749                 iface = fdt_subnode_offset(initial_boot_params, pip,
 750                                            name_buffer);
 751                 if (iface < 0)
 752                         continue;
 753                 for (p = 0; p < 16; p++) {
 754                         int eth;
 755
 756                         snprintf(name_buffer, sizeof(name_buffer),
 757                                  "ethernet@%x", p);
 758                         eth = fdt_subnode_offset(initial_boot_params, iface,
 759                                                  name_buffer);
 760                         if (eth < 0)
 761                                 continue;
 762                         octeon_fdt_set_mac_addr(eth, &mac_addr_base);
 763                 }
 764         }
 765 }
 766
 767 int __init octeon_prune_device_tree(void)
 768 {
 769         int i, max_port, uart_mask;
 770         const char *pip_path;
 771         const char *alias_prop;
 772         char name_buffer[20];
 773         int aliases;
 774
 775         if (fdt_check_header(initial_boot_params))
 776                 panic("Corrupt Device Tree.");
 777
 778         WARN(octeon_bootinfo->board_type == CVMX_BOARD_TYPE_CUST_DSR1000N,
 779              "Built-in DTB booting is deprecated on %s. Please switch to use appended DTB.",
 780              cvmx_board_type_to_string(octeon_bootinfo->board_type));
 781
 782         aliases = fdt_path_offset(initial_boot_params, "/aliases");
 783         if (aliases < 0) {
 784                 pr_err("Error: No /aliases node in device tree.");
 785                 return -EINVAL;
 786         }
 787
 788         if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN63XX))
 789                 max_port = 2;
 790         else if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN68XX))
 791                 max_port = 1;
 792         else
 793                 max_port = 0;
 794
 795         if (octeon_bootinfo->board_type == CVMX_BOARD_TYPE_NIC10E)
 796                 max_port = 0;
 797
 798         for (i = 0; i < 2; i++) {
 799                 int mgmt;
 800
 801                 snprintf(name_buffer, sizeof(name_buffer),
 802                          "mix%d", i);
 803                 alias_prop = fdt_getprop(initial_boot_params, aliases,
 804                                         name_buffer, NULL);
 805                 if (alias_prop) {
 806                         mgmt = fdt_path_offset(initial_boot_params, alias_prop);
 807                         if (mgmt < 0)
 808                                 continue;
 809                         if (i >= max_port) {
 810                                 pr_debug("Deleting mix%d\n", i);
 811                                 octeon_fdt_rm_ethernet(mgmt);
 812                                 fdt_nop_property(initial_boot_params, aliases,
 813                                                  name_buffer);
 814                         } else {
 815                                 int phy_addr = cvmx_helper_board_get_mii_address(CVMX_HELPER_BOARD_MGMT_IPD_PORT + i);
 816
 817                                 octeon_fdt_set_phy(mgmt, phy_addr);
 818                         }
 819                 }
 820         }
 821
 822         pip_path = fdt_getprop(initial_boot_params, aliases, "pip", NULL);
 823         if (pip_path) {
 824                 int pip = fdt_path_offset(initial_boot_params, pip_path);
 825
 826                 if (pip  >= 0)
 827                         for (i = 0; i <= 4; i++)
 828                                 octeon_fdt_pip_iface(pip, i);
 829         }
 830
 831         /* I2C */
 832         if (OCTEON_IS_MODEL(OCTEON_CN52XX) ||
 833             OCTEON_IS_MODEL(OCTEON_CN63XX) ||
 834             OCTEON_IS_MODEL(OCTEON_CN68XX) ||
 835             OCTEON_IS_MODEL(OCTEON_CN56XX))
 836                 max_port = 2;
 837         else
 838                 max_port = 1;
 839
 840         for (i = 0; i < 2; i++) {
 841                 int i2c;
 842
 843                 snprintf(name_buffer, sizeof(name_buffer),
 844                          "twsi%d", i);
 845                 alias_prop = fdt_getprop(initial_boot_params, aliases,
 846                                         name_buffer, NULL);
 847
 848                 if (alias_prop) {
 849                         i2c = fdt_path_offset(initial_boot_params, alias_prop);
 850                         if (i2c < 0)
 851                                 continue;
 852                         if (i >= max_port) {
 853                                 pr_debug("Deleting twsi%d\n", i);
 854                                 fdt_nop_node(initial_boot_params, i2c);
 855                                 fdt_nop_property(initial_boot_params, aliases,
 856                                                  name_buffer);
 857                         }
 858                 }
 859         }
 860
 861         /* SMI/MDIO */
 862         if (OCTEON_IS_MODEL(OCTEON_CN68XX))
 863                 max_port = 4;
 864         else if (OCTEON_IS_MODEL(OCTEON_CN52XX) ||
 865                  OCTEON_IS_MODEL(OCTEON_CN63XX) ||
 866                  OCTEON_IS_MODEL(OCTEON_CN56XX))
 867                 max_port = 2;
 868         else
 869                 max_port = 1;
 870
 871         for (i = 0; i < 2; i++) {
 872                 int i2c;
 873
 874                 snprintf(name_buffer, sizeof(name_buffer),
 875                          "smi%d", i);
 876                 alias_prop = fdt_getprop(initial_boot_params, aliases,
 877                                         name_buffer, NULL);
 878                 if (alias_prop) {
 879                         i2c = fdt_path_offset(initial_boot_params, alias_prop);
 880                         if (i2c < 0)
 881                                 continue;
 882                         if (i >= max_port) {
 883                                 pr_debug("Deleting smi%d\n", i);
 884                                 fdt_nop_node(initial_boot_params, i2c);
 885                                 fdt_nop_property(initial_boot_params, aliases,
 886                                                  name_buffer);
 887                         }
 888                 }
 889         }
 890
 891         /* Serial */
 892         uart_mask = 3;
 893
 894         /* Right now CN52XX is the only chip with a third uart */
 895         if (OCTEON_IS_MODEL(OCTEON_CN52XX))
 896                 uart_mask |= 4; /* uart2 */
 897
 898         for (i = 0; i < 3; i++) {
 899                 int uart;
 900
 901                 snprintf(name_buffer, sizeof(name_buffer),
 902                          "uart%d", i);
 903                 alias_prop = fdt_getprop(initial_boot_params, aliases,
 904                                         name_buffer, NULL);
 905
 906                 if (alias_prop) {
 907                         uart = fdt_path_offset(initial_boot_params, alias_prop);
 908                         if (uart_mask & (1 << i)) {
 909                                 __be32 f;
 910
 911                                 f = cpu_to_be32(octeon_get_io_clock_rate());
 912                                 fdt_setprop_inplace(initial_boot_params,
 913                                                     uart, "clock-frequency",
 914                                                     &f, sizeof(f));
 915                                 continue;
 916                         }
 917                         pr_debug("Deleting uart%d\n", i);
 918                         fdt_nop_node(initial_boot_params, uart);
 919                         fdt_nop_property(initial_boot_params, aliases,
 920                                          name_buffer);
 921                 }
 922         }
 923
 924         /* Compact Flash */
 925         alias_prop = fdt_getprop(initial_boot_params, aliases,
 926                                  "cf0", NULL);
 927         if (alias_prop) {
 928                 union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg;
 929                 unsigned long base_ptr, region_base, region_size;
 930                 unsigned long region1_base = 0;
 931                 unsigned long region1_size = 0;
 932                 int cs, bootbus;
 933                 bool is_16bit = false;
 934                 bool is_true_ide = false;
 935                 __be32 new_reg[6];
 936                 __be32 *ranges;
 937                 int len;
 938
 939                 int cf = fdt_path_offset(initial_boot_params, alias_prop);
 940
 941                 base_ptr = 0;
 942                 if (octeon_bootinfo->major_version == 1
 943                         && octeon_bootinfo->minor_version >= 1) {
 944                         if (octeon_bootinfo->compact_flash_common_base_addr)
 945                                 base_ptr = octeon_bootinfo->compact_flash_common_base_addr;
 946                 } else {
 947                         base_ptr = 0x1d000800;
 948                 }
 949
 950                 if (!base_ptr)
 951                         goto no_cf;
 952
 953                 /* Find CS0 region. */
 954                 for (cs = 0; cs < 8; cs++) {
 955                         mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs));
 956                         region_base = mio_boot_reg_cfg.s.base << 16;
 957                         region_size = (mio_boot_reg_cfg.s.size + 1) << 16;
 958                         if (mio_boot_reg_cfg.s.en && base_ptr >= region_base
 959                                 && base_ptr < region_base + region_size) {
 960                                 is_16bit = mio_boot_reg_cfg.s.width;
 961                                 break;
 962                         }
 963                 }
 964                 if (cs >= 7) {
 965                         /* cs and cs + 1 are CS0 and CS1, both must be less than 8. */
 966                         goto no_cf;
 967                 }
 968
 969                 if (!(base_ptr & 0xfffful)) {
 970                         /*
 971                          * Boot loader signals availability of DMA (true_ide
 972                          * mode) by setting low order bits of base_ptr to
 973                          * zero.
 974                          */
 975
 976                         /* Asume that CS1 immediately follows. */
 977                         mio_boot_reg_cfg.u64 =
 978                                 cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs + 1));
 979                         region1_base = mio_boot_reg_cfg.s.base << 16;
 980                         region1_size = (mio_boot_reg_cfg.s.size + 1) << 16;
 981                         if (!mio_boot_reg_cfg.s.en)
 982                                 goto no_cf;
 983                         is_true_ide = true;
 984
 985                 } else {
 986                         fdt_nop_property(initial_boot_params, cf, "cavium,true-ide");
 987                         fdt_nop_property(initial_boot_params, cf, "cavium,dma-engine-handle");
 988                         if (!is_16bit) {
 989                                 __be32 width = cpu_to_be32(8);
 990
 991                                 fdt_setprop_inplace(initial_boot_params, cf,
 992                                                 "cavium,bus-width", &width, sizeof(width));
 993                         }
 994                 }
 995                 new_reg[0] = cpu_to_be32(cs);
 996                 new_reg[1] = cpu_to_be32(0);
 997                 new_reg[2] = cpu_to_be32(0x10000);
 998                 new_reg[3] = cpu_to_be32(cs + 1);
 999                 new_reg[4] = cpu_to_be32(0);
1000                 new_reg[5] = cpu_to_be32(0x10000);
1001                 fdt_setprop_inplace(initial_boot_params, cf,
1002                                     "reg",  new_reg, sizeof(new_reg));
1003
1004                 bootbus = fdt_parent_offset(initial_boot_params, cf);
1005                 if (bootbus < 0)
1006                         goto no_cf;
1007                 ranges = fdt_getprop_w(initial_boot_params, bootbus, "ranges", &len);
1008                 if (!ranges || len < (5 * 8 * sizeof(__be32)))
1009                         goto no_cf;
1010
1011                 ranges[(cs * 5) + 2] = cpu_to_be32(region_base >> 32);
1012                 ranges[(cs * 5) + 3] = cpu_to_be32(region_base & 0xffffffff);
1013                 ranges[(cs * 5) + 4] = cpu_to_be32(region_size);
1014                 if (is_true_ide) {
1015                         cs++;
1016                         ranges[(cs * 5) + 2] = cpu_to_be32(region1_base >> 32);
1017                         ranges[(cs * 5) + 3] = cpu_to_be32(region1_base & 0xffffffff);
1018                         ranges[(cs * 5) + 4] = cpu_to_be32(region1_size);
1019                 }
1020                 goto end_cf;
1021 no_cf:
1022                 fdt_nop_node(initial_boot_params, cf);
1023
1024 end_cf:
1025                 ;
1026         }
1027
1028         /* 8 char LED */
1029         alias_prop = fdt_getprop(initial_boot_params, aliases,
1030                                  "led0", NULL);
1031         if (alias_prop) {
1032                 union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg;
1033                 unsigned long base_ptr, region_base, region_size;
1034                 int cs, bootbus;
1035                 __be32 new_reg[6];
1036                 __be32 *ranges;
1037                 int len;
1038                 int led = fdt_path_offset(initial_boot_params, alias_prop);
1039
1040                 base_ptr = octeon_bootinfo->led_display_base_addr;
1041                 if (base_ptr == 0)
1042                         goto no_led;
1043                 /* Find CS0 region. */
1044                 for (cs = 0; cs < 8; cs++) {
1045                         mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs));
1046                         region_base = mio_boot_reg_cfg.s.base << 16;
1047                         region_size = (mio_boot_reg_cfg.s.size + 1) << 16;
1048                         if (mio_boot_reg_cfg.s.en && base_ptr >= region_base
1049                                 && base_ptr < region_base + region_size)
1050                                 break;
1051                 }
1052
1053                 if (cs > 7)
1054                         goto no_led;
1055
1056                 new_reg[0] = cpu_to_be32(cs);
1057                 new_reg[1] = cpu_to_be32(0x20);
1058                 new_reg[2] = cpu_to_be32(0x20);
1059                 new_reg[3] = cpu_to_be32(cs);
1060                 new_reg[4] = cpu_to_be32(0);
1061                 new_reg[5] = cpu_to_be32(0x20);
1062                 fdt_setprop_inplace(initial_boot_params, led,
1063                                     "reg",  new_reg, sizeof(new_reg));
1064
1065                 bootbus = fdt_parent_offset(initial_boot_params, led);
1066                 if (bootbus < 0)
1067                         goto no_led;
1068                 ranges = fdt_getprop_w(initial_boot_params, bootbus, "ranges", &len);
1069                 if (!ranges || len < (5 * 8 * sizeof(__be32)))
1070                         goto no_led;
1071
1072                 ranges[(cs * 5) + 2] = cpu_to_be32(region_base >> 32);
1073                 ranges[(cs * 5) + 3] = cpu_to_be32(region_base & 0xffffffff);
1074                 ranges[(cs * 5) + 4] = cpu_to_be32(region_size);
1075                 goto end_led;
1076
1077 no_led:
1078                 fdt_nop_node(initial_boot_params, led);
1079 end_led:
1080                 ;
1081         }
1082
1083 #ifdef CONFIG_USB
1084         /* OHCI/UHCI USB */
1085         alias_prop = fdt_getprop(initial_boot_params, aliases,
1086                                  "uctl", NULL);
1087         if (alias_prop) {
1088                 int uctl = fdt_path_offset(initial_boot_params, alias_prop);
1089
1090                 if (uctl >= 0 && (!OCTEON_IS_MODEL(OCTEON_CN6XXX) ||
1091                                   octeon_bootinfo->board_type == CVMX_BOARD_TYPE_NIC2E)) {
1092                         pr_debug("Deleting uctl\n");
1093                         fdt_nop_node(initial_boot_params, uctl);
1094                         fdt_nop_property(initial_boot_params, aliases, "uctl");
1095                 } else if (octeon_bootinfo->board_type == CVMX_BOARD_TYPE_NIC10E ||
1096                            octeon_bootinfo->board_type == CVMX_BOARD_TYPE_NIC4E) {
1097                         /* Missing "refclk-type" defaults to crystal. */
1098                         fdt_nop_property(initial_boot_params, uctl, "refclk-type");
1099                 }
1100         }
1101
1102         /* DWC2 USB */
1103         alias_prop = fdt_getprop(initial_boot_params, aliases,
1104                                  "usbn", NULL);
1105         if (alias_prop) {
1106                 int usbn = fdt_path_offset(initial_boot_params, alias_prop);
1107
1108                 if (usbn >= 0 && (current_cpu_type() == CPU_CAVIUM_OCTEON2 ||
1109                                   !octeon_has_feature(OCTEON_FEATURE_USB))) {
1110                         pr_debug("Deleting usbn\n");
1111                         fdt_nop_node(initial_boot_params, usbn);
1112                         fdt_nop_property(initial_boot_params, aliases, "usbn");
1113                 } else  {
1114                         __be32 new_f[1];
1115                         enum cvmx_helper_board_usb_clock_types c;
1116
1117                         c = __cvmx_helper_board_usb_get_clock_type();
1118                         switch (c) {
1119                         case USB_CLOCK_TYPE_REF_48:
1120                                 new_f[0] = cpu_to_be32(48000000);
1121                                 fdt_setprop_inplace(initial_boot_params, usbn,
1122                                                     "refclk-frequency",  new_f, sizeof(new_f));
1123                                 fallthrough;
1124                         case USB_CLOCK_TYPE_REF_12:
1125                                 /* Missing "refclk-type" defaults to external. */
1126                                 fdt_nop_property(initial_boot_params, usbn, "refclk-type");
1127                                 break;
1128                         default:
1129                                 break;
1130                         }
1131                 }
1132         }
1133 #endif
1134
1135         return 0;
1136 }
1137
1138 static int __init octeon_publish_devices(void)
1139 {
1140         return of_platform_populate(NULL, octeon_ids, NULL, NULL);
1141 }
1142 arch_initcall(octeon_publish_devices);