arch/mips/boot/dts/ingenic/x1000.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 #include <dt-bindings/clock/ingenic,tcu.h>
   3 #include <dt-bindings/clock/ingenic,x1000-cgu.h>
   4 #include <dt-bindings/dma/x1000-dma.h>
   5
   6 / {
   7         #address-cells = <1>;
   8         #size-cells = <1>;
   9         compatible = "ingenic,x1000", "ingenic,x1000e";
  10
  11         cpus {
  12                 #address-cells = <1>;
  13                 #size-cells = <0>;
  14
  15                 cpu0: cpu@0 {
  16                         device_type = "cpu";
  17                         compatible = "ingenic,xburst-fpu1.0-mxu1.1";
  18                         reg = <0>;
  19
  20                         clocks = <&cgu X1000_CLK_CPU>;
  21                         clock-names = "cpu";
  22                 };
  23         };
  24
  25         cpuintc: interrupt-controller {
  26                 #address-cells = <0>;
  27                 #interrupt-cells = <1>;
  28                 interrupt-controller;
  29                 compatible = "mti,cpu-interrupt-controller";
  30         };
  31
  32         intc: interrupt-controller@10001000 {
  33                 compatible = "ingenic,x1000-intc", "ingenic,jz4780-intc";
  34                 reg = <0x10001000 0x50>;
  35
  36                 interrupt-controller;
  37                 #interrupt-cells = <1>;
  38
  39                 interrupt-parent = <&cpuintc>;
  40                 interrupts = <2>;
  41         };
  42
  43         exclk: ext {
  44                 compatible = "fixed-clock";
  45                 #clock-cells = <0>;
  46         };
  47
  48         rtclk: rtc {
  49                 compatible = "fixed-clock";
  50                 #clock-cells = <0>;
  51                 clock-frequency = <32768>;
  52         };
  53
  54         cgu: x1000-cgu@10000000 {
  55                 compatible = "ingenic,x1000-cgu", "simple-mfd";
  56                 reg = <0x10000000 0x100>;
  57                 #address-cells = <1>;
  58                 #size-cells = <1>;
  59                 ranges = <0x0 0x10000000 0x100>;
  60
  61                 #clock-cells = <1>;
  62
  63                 clocks = <&exclk>, <&rtclk>;
  64                 clock-names = "ext", "rtc";
  65
  66                 otg_phy: usb-phy@3c {
  67                         compatible = "ingenic,x1000-phy";
  68                         reg = <0x3c 0x10>;
  69
  70                         clocks = <&cgu X1000_CLK_OTGPHY>;
  71
  72                         #phy-cells = <0>;
  73
  74                         status = "disabled";
  75                 };
  76
  77                 rng: rng@d8 {
  78                         compatible = "ingenic,x1000-rng";
  79                         reg = <0xd8 0x8>;
  80
  81                         status = "disabled";
  82                 };
  83
  84                 mac_phy_ctrl: mac-phy-ctrl@e8 {
  85                         compatible = "syscon";
  86                         reg = <0xe8 0x4>;
  87                 };
  88         };
  89
  90         ost: timer@12000000 {
  91                 compatible = "ingenic,x1000-ost";
  92                 reg = <0x12000000 0x3c>;
  93
  94                 #clock-cells = <1>;
  95
  96                 clocks = <&cgu X1000_CLK_OST>;
  97                 clock-names = "ost";
  98
  99                 interrupt-parent = <&cpuintc>;
 100                 interrupts = <3>;
 101         };
 102
 103         tcu: timer@10002000 {
 104                 compatible = "ingenic,x1000-tcu", "simple-mfd";
 105                 reg = <0x10002000 0x1000>;
 106                 #address-cells = <1>;
 107                 #size-cells = <1>;
 108                 ranges = <0x0 0x10002000 0x1000>;
 109
 110                 #clock-cells = <1>;
 111
 112                 clocks = <&cgu X1000_CLK_RTCLK>,
 113                          <&cgu X1000_CLK_EXCLK>,
 114                          <&cgu X1000_CLK_PCLK>,
 115                          <&cgu X1000_CLK_TCU>;
 116                 clock-names = "rtc", "ext", "pclk", "tcu";
 117
 118                 interrupt-controller;
 119                 #interrupt-cells = <1>;
 120
 121                 interrupt-parent = <&intc>;
 122                 interrupts = <27 26 25>;
 123
 124                 wdt: watchdog@0 {
 125                         compatible = "ingenic,x1000-watchdog", "ingenic,jz4780-watchdog";
 126                         reg = <0x0 0x10>;
 127
 128                         clocks = <&tcu TCU_CLK_WDT>;
 129                         clock-names = "wdt";
 130                 };
 131
 132                 pwm: pwm@40 {
 133                         compatible = "ingenic,x1000-pwm";
 134                         reg = <0x40 0x50>;
 135
 136                         #pwm-cells = <3>;
 137
 138                         clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
 139                                  <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
 140                                  <&tcu TCU_CLK_TIMER4>;
 141                         clock-names = "timer0", "timer1", "timer2", "timer3", "timer4";
 142                 };
 143         };
 144
 145         rtc: rtc@10003000 {
 146                 compatible = "ingenic,x1000-rtc", "ingenic,jz4780-rtc";
 147                 reg = <0x10003000 0x4c>;
 148
 149                 interrupt-parent = <&intc>;
 150                 interrupts = <32>;
 151
 152                 clocks = <&cgu X1000_CLK_RTCLK>;
 153                 clock-names = "rtc";
 154         };
 155
 156         pinctrl: pin-controller@10010000 {
 157                 compatible = "ingenic,x1000-pinctrl";
 158                 reg = <0x10010000 0x800>;
 159                 #address-cells = <1>;
 160                 #size-cells = <0>;
 161
 162                 gpa: gpio@0 {
 163                         compatible = "ingenic,x1000-gpio";
 164                         reg = <0>;
 165
 166                         gpio-controller;
 167                         gpio-ranges = <&pinctrl 0 0 32>;
 168                         #gpio-cells = <2>;
 169
 170                         interrupt-controller;
 171                         #interrupt-cells = <2>;
 172
 173                         interrupt-parent = <&intc>;
 174                         interrupts = <17>;
 175                 };
 176
 177                 gpb: gpio@1 {
 178                         compatible = "ingenic,x1000-gpio";
 179                         reg = <1>;
 180
 181                         gpio-controller;
 182                         gpio-ranges = <&pinctrl 0 32 32>;
 183                         #gpio-cells = <2>;
 184
 185                         interrupt-controller;
 186                         #interrupt-cells = <2>;
 187
 188                         interrupt-parent = <&intc>;
 189                         interrupts = <16>;
 190                 };
 191
 192                 gpc: gpio@2 {
 193                         compatible = "ingenic,x1000-gpio";
 194                         reg = <2>;
 195
 196                         gpio-controller;
 197                         gpio-ranges = <&pinctrl 0 64 32>;
 198                         #gpio-cells = <2>;
 199
 200                         interrupt-controller;
 201                         #interrupt-cells = <2>;
 202
 203                         interrupt-parent = <&intc>;
 204                         interrupts = <15>;
 205                 };
 206
 207                 gpd: gpio@3 {
 208                         compatible = "ingenic,x1000-gpio";
 209                         reg = <3>;
 210
 211                         gpio-controller;
 212                         gpio-ranges = <&pinctrl 0 96 32>;
 213                         #gpio-cells = <2>;
 214
 215                         interrupt-controller;
 216                         #interrupt-cells = <2>;
 217
 218                         interrupt-parent = <&intc>;
 219                         interrupts = <14>;
 220                 };
 221         };
 222
 223         uart0: serial@10030000 {
 224                 compatible = "ingenic,x1000-uart";
 225                 reg = <0x10030000 0x100>;
 226
 227                 interrupt-parent = <&intc>;
 228                 interrupts = <51>;
 229
 230                 clocks = <&exclk>, <&cgu X1000_CLK_UART0>;
 231                 clock-names = "baud", "module";
 232
 233                 status = "disabled";
 234         };
 235
 236         uart1: serial@10031000 {
 237                 compatible = "ingenic,x1000-uart";
 238                 reg = <0x10031000 0x100>;
 239
 240                 interrupt-parent = <&intc>;
 241                 interrupts = <50>;
 242
 243                 clocks = <&exclk>, <&cgu X1000_CLK_UART1>;
 244                 clock-names = "baud", "module";
 245
 246                 status = "disabled";
 247         };
 248
 249         uart2: serial@10032000 {
 250                 compatible = "ingenic,x1000-uart";
 251                 reg = <0x10032000 0x100>;
 252
 253                 interrupt-parent = <&intc>;
 254                 interrupts = <49>;
 255
 256                 clocks = <&exclk>, <&cgu X1000_CLK_UART2>;
 257                 clock-names = "baud", "module";
 258
 259                 status = "disabled";
 260         };
 261
 262         ssi: spi@10043000 {
 263                 compatible = "ingenic,x1000-spi";
 264                 reg = <0x10043000 0x20>;
 265                 #address-cells = <1>;
 266                 #size-cells = <0>;
 267
 268                 interrupt-parent = <&intc>;
 269                 interrupts = <8>;
 270
 271                 clocks = <&cgu X1000_CLK_SSI>;
 272                 clock-names = "spi";
 273
 274                 dmas = <&pdma X1000_DMA_SSI0_RX 0xffffffff>,
 275                            <&pdma X1000_DMA_SSI0_TX 0xffffffff>;
 276                 dma-names = "rx", "tx";
 277
 278                 status = "disabled";
 279         };
 280
 281         i2c0: i2c-controller@10050000 {
 282                 compatible = "ingenic,x1000-i2c";
 283                 reg = <0x10050000 0x1000>;
 284                 #address-cells = <1>;
 285                 #size-cells = <0>;
 286
 287                 interrupt-parent = <&intc>;
 288                 interrupts = <60>;
 289
 290                 clocks = <&cgu X1000_CLK_I2C0>;
 291
 292                 status = "disabled";
 293         };
 294
 295         i2c1: i2c-controller@10051000 {
 296                 compatible = "ingenic,x1000-i2c";
 297                 reg = <0x10051000 0x1000>;
 298                 #address-cells = <1>;
 299                 #size-cells = <0>;
 300
 301                 interrupt-parent = <&intc>;
 302                 interrupts = <59>;
 303
 304                 clocks = <&cgu X1000_CLK_I2C1>;
 305
 306                 status = "disabled";
 307         };
 308
 309         i2c2: i2c-controller@10052000 {
 310                 compatible = "ingenic,x1000-i2c";
 311                 reg = <0x10052000 0x1000>;
 312                 #address-cells = <1>;
 313                 #size-cells = <0>;
 314
 315                 interrupt-parent = <&intc>;
 316                 interrupts = <58>;
 317
 318                 clocks = <&cgu X1000_CLK_I2C2>;
 319
 320                 status = "disabled";
 321         };
 322
 323         pdma: dma-controller@13420000 {
 324                 compatible = "ingenic,x1000-dma";
 325                 reg = <0x13420000 0x400>, <0x13421000 0x40>;
 326
 327                 #dma-cells = <2>;
 328
 329                 interrupt-parent = <&intc>;
 330                 interrupts = <10>;
 331
 332                 clocks = <&cgu X1000_CLK_PDMA>;
 333         };
 334
 335         msc0: mmc@13450000 {
 336                 compatible = "ingenic,x1000-mmc";
 337                 reg = <0x13450000 0x1000>;
 338
 339                 interrupt-parent = <&intc>;
 340                 interrupts = <37>;
 341
 342                 clocks = <&cgu X1000_CLK_MSC0>;
 343                 clock-names = "mmc";
 344
 345                 cap-sd-highspeed;
 346                 cap-mmc-highspeed;
 347                 cap-sdio-irq;
 348
 349                 dmas = <&pdma X1000_DMA_MSC0_RX 0xffffffff>,
 350                            <&pdma X1000_DMA_MSC0_TX 0xffffffff>;
 351                 dma-names = "rx", "tx";
 352
 353                 status = "disabled";
 354         };
 355
 356         msc1: mmc@13460000 {
 357                 compatible = "ingenic,x1000-mmc";
 358                 reg = <0x13460000 0x1000>;
 359
 360                 interrupt-parent = <&intc>;
 361                 interrupts = <36>;
 362
 363                 clocks = <&cgu X1000_CLK_MSC1>;
 364                 clock-names = "mmc";
 365
 366                 cap-sd-highspeed;
 367                 cap-mmc-highspeed;
 368                 cap-sdio-irq;
 369
 370                 dmas = <&pdma X1000_DMA_MSC1_RX 0xffffffff>,
 371                            <&pdma X1000_DMA_MSC1_TX 0xffffffff>;
 372                 dma-names = "rx", "tx";
 373
 374                 status = "disabled";
 375         };
 376
 377         mac: ethernet@134b0000 {
 378                 compatible = "ingenic,x1000-mac", "snps,dwmac";
 379                 reg = <0x134b0000 0x2000>;
 380
 381                 interrupt-parent = <&intc>;
 382                 interrupts = <55>;
 383                 interrupt-names = "macirq";
 384
 385                 clocks = <&cgu X1000_CLK_MAC>;
 386                 clock-names = "stmmaceth";
 387
 388                 mode-reg = <&mac_phy_ctrl>;
 389
 390                 status = "disabled";
 391
 392                 mdio: mdio {
 393                         compatible = "snps,dwmac-mdio";
 394                         #address-cells = <1>;
 395                         #size-cells = <0>;
 396
 397                         status = "disabled";
 398                 };
 399         };
 400
 401         otg: usb@13500000 {
 402                 compatible = "ingenic,x1000-otg";
 403                 reg = <0x13500000 0x40000>;
 404
 405                 interrupt-parent = <&intc>;
 406                 interrupts = <21>;
 407
 408                 clocks = <&cgu X1000_CLK_OTG>;
 409                 clock-names = "otg";
 410
 411                 phys = <&otg_phy>;
 412                 phy-names = "usb2-phy";
 413
 414                 g-rx-fifo-size = <768>;
 415                 g-np-tx-fifo-size = <256>;
 416                 g-tx-fifo-size = <256 256 256 256 256 256 256 512>;
 417
 418                 status = "disabled";
 419         };
 420
 421         aic: audio-controller@10020000 {
 422                 compatible = "ingenic,x1000-i2s";
 423                 reg = <0x10020000 0x38>;
 424
 425                 #sound-dai-cells = <0>;
 426
 427                 interrupt-parent = <&intc>;
 428                 interrupts = <1>;
 429
 430                 clocks = <&cgu X1000_CLK_AIC>,
 431                          <&cgu X1000_CLK_I2S>;
 432                 clock-names = "aic", "i2s";
 433
 434                 dmas = <&pdma X1000_DMA_I2S0_RX 0xffffffff>,
 435                            <&pdma X1000_DMA_I2S0_TX 0xffffffff>;
 436                 dma-names = "rx", "tx";
 437         };
 438 };