arch/mips/boot/dts/brcm/bcm7425.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 / {
   3         #address-cells = <1>;
   4         #size-cells = <1>;
   5         compatible = "brcm,bcm7425";
   6
   7         cpus {
   8                 #address-cells = <1>;
   9                 #size-cells = <0>;
  10
  11                 mips-hpt-frequency = <163125000>;
  12
  13                 cpu@0 {
  14                         compatible = "brcm,bmips5000";
  15                         device_type = "cpu";
  16                         reg = <0>;
  17                 };
  18
  19                 cpu@1 {
  20                         compatible = "brcm,bmips5000";
  21                         device_type = "cpu";
  22                         reg = <1>;
  23                 };
  24         };
  25
  26         aliases {
  27                 uart0 = &uart0;
  28         };
  29
  30         cpu_intc: interrupt-controller {
  31                 #address-cells = <0>;
  32                 compatible = "mti,cpu-interrupt-controller";
  33
  34                 interrupt-controller;
  35                 #interrupt-cells = <1>;
  36         };
  37
  38         clocks {
  39                 uart_clk: uart_clk {
  40                         compatible = "fixed-clock";
  41                         #clock-cells = <0>;
  42                         clock-frequency = <81000000>;
  43                 };
  44
  45                 upg_clk: upg_clk {
  46                         compatible = "fixed-clock";
  47                         #clock-cells = <0>;
  48                         clock-frequency = <27000000>;
  49                 };
  50         };
  51
  52         rdb {
  53                 #address-cells = <1>;
  54                 #size-cells = <1>;
  55
  56                 compatible = "simple-bus";
  57                 ranges = <0 0x10000000 0x01000000>;
  58
  59                 periph_intc: interrupt-controller@41a400 {
  60                         compatible = "brcm,bcm7038-l1-intc";
  61                         reg = <0x41a400 0x30>, <0x41a600 0x30>;
  62
  63                         interrupt-controller;
  64                         #interrupt-cells = <1>;
  65
  66                         interrupt-parent = <&cpu_intc>;
  67                         interrupts = <2>, <3>;
  68                 };
  69
  70                 sun_l2_intc: interrupt-controller@403000 {
  71                         compatible = "brcm,l2-intc";
  72                         reg = <0x403000 0x30>;
  73                         interrupt-controller;
  74                         #interrupt-cells = <1>;
  75                         interrupt-parent = <&periph_intc>;
  76                         interrupts = <47>;
  77                 };
  78
  79                 gisb-arb@400000 {
  80                         compatible = "brcm,bcm7400-gisb-arb";
  81                         reg = <0x400000 0xdc>;
  82                         native-endian;
  83                         interrupt-parent = <&sun_l2_intc>;
  84                         interrupts = <0>, <2>;
  85                         brcm,gisb-arb-master-mask = <0x177b>;
  86                         brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pcie_0",
  87                                                      "bsp_0", "rdc_0",
  88                                                      "raaga_0", "avd_1",
  89                                                      "jtag_0", "svd_0",
  90                                                      "vice_0";
  91                 };
  92
  93                 upg_irq0_intc: interrupt-controller@406780 {
  94                         compatible = "brcm,bcm7120-l2-intc";
  95                         reg = <0x406780 0x8>;
  96
  97                         brcm,int-map-mask = <0x44>, <0x7000000>;
  98                         brcm,int-fwd-mask = <0x70000>;
  99
 100                         interrupt-controller;
 101                         #interrupt-cells = <1>;
 102
 103                         interrupt-parent = <&periph_intc>;
 104                         interrupts = <55>, <53>;
 105                         interrupt-names = "upg_main", "upg_bsc";
 106                 };
 107
 108                 upg_aon_irq0_intc: interrupt-controller@409480 {
 109                         compatible = "brcm,bcm7120-l2-intc";
 110                         reg = <0x409480 0x8>;
 111
 112                         brcm,int-map-mask = <0x40>, <0x18000000>, <0x100000>;
 113                         brcm,int-fwd-mask = <0>;
 114                         brcm,irq-can-wake;
 115
 116                         interrupt-controller;
 117                         #interrupt-cells = <1>;
 118
 119                         interrupt-parent = <&periph_intc>;
 120                         interrupts = <56>, <54>, <59>;
 121                         interrupt-names = "upg_main_aon", "upg_bsc_aon",
 122                                           "upg_spi";
 123                 };
 124
 125                 sun_top_ctrl: syscon@404000 {
 126                         compatible = "brcm,bcm7425-sun-top-ctrl", "syscon";
 127                         reg = <0x404000 0x51c>;
 128                         native-endian;
 129                 };
 130
 131                 reboot {
 132                         compatible = "brcm,brcmstb-reboot";
 133                         syscon = <&sun_top_ctrl 0x304 0x308>;
 134                 };
 135
 136                 uart0: serial@406b00 {
 137                         compatible = "ns16550a";
 138                         reg = <0x406b00 0x20>;
 139                         reg-io-width = <0x4>;
 140                         reg-shift = <0x2>;
 141                         interrupt-parent = <&periph_intc>;
 142                         interrupts = <61>;
 143                         clocks = <&uart_clk>;
 144                         status = "disabled";
 145                 };
 146
 147                 uart1: serial@406b40 {
 148                         compatible = "ns16550a";
 149                         reg = <0x406b40 0x20>;
 150                         reg-io-width = <0x4>;
 151                         reg-shift = <0x2>;
 152                         interrupt-parent = <&periph_intc>;
 153                         interrupts = <62>;
 154                         clocks = <&uart_clk>;
 155                         status = "disabled";
 156                 };
 157
 158                 uart2: serial@406b80 {
 159                         compatible = "ns16550a";
 160                         reg = <0x406b80 0x20>;
 161                         reg-io-width = <0x4>;
 162                         reg-shift = <0x2>;
 163                         interrupt-parent = <&periph_intc>;
 164                         interrupts = <63>;
 165                         clocks = <&uart_clk>;
 166                         status = "disabled";
 167                 };
 168
 169                 bsca: i2c@409180 {
 170                       clock-frequency = <390000>;
 171                       compatible = "brcm,brcmstb-i2c";
 172                       interrupt-parent = <&upg_aon_irq0_intc>;
 173                       reg = <0x409180 0x58>;
 174                       interrupts = <27>;
 175                       interrupt-names = "upg_bsca";
 176                       status = "disabled";
 177                 };
 178
 179                 bscb: i2c@409400 {
 180                       clock-frequency = <390000>;
 181                       compatible = "brcm,brcmstb-i2c";
 182                       interrupt-parent = <&upg_aon_irq0_intc>;
 183                       reg = <0x409400 0x58>;
 184                       interrupts = <28>;
 185                       interrupt-names = "upg_bscb";
 186                       status = "disabled";
 187                 };
 188
 189                 bscc: i2c@406200 {
 190                       clock-frequency = <390000>;
 191                       compatible = "brcm,brcmstb-i2c";
 192                       interrupt-parent = <&upg_irq0_intc>;
 193                       reg = <0x406200 0x58>;
 194                       interrupts = <24>;
 195                       interrupt-names = "upg_bscc";
 196                       status = "disabled";
 197                 };
 198
 199                 bscd: i2c@406280 {
 200                       clock-frequency = <390000>;
 201                       compatible = "brcm,brcmstb-i2c";
 202                       interrupt-parent = <&upg_irq0_intc>;
 203                       reg = <0x406280 0x58>;
 204                       interrupts = <25>;
 205                       interrupt-names = "upg_bscd";
 206                       status = "disabled";
 207                 };
 208
 209                 bsce: i2c@406300 {
 210                       clock-frequency = <390000>;
 211                       compatible = "brcm,brcmstb-i2c";
 212                       interrupt-parent = <&upg_irq0_intc>;
 213                       reg = <0x406300 0x58>;
 214                       interrupts = <26>;
 215                       interrupt-names = "upg_bsce";
 216                       status = "disabled";
 217                 };
 218
 219                 pwma: pwm@406580 {
 220                         compatible = "brcm,bcm7038-pwm";
 221                         reg = <0x406580 0x28>;
 222                         #pwm-cells = <2>;
 223                         clocks = <&upg_clk>;
 224                         status = "disabled";
 225                 };
 226
 227                 pwmb: pwm@406800 {
 228                         compatible = "brcm,bcm7038-pwm";
 229                         reg = <0x406800 0x28>;
 230                         #pwm-cells = <2>;
 231                         clocks = <&upg_clk>;
 232                         status = "disabled";
 233                 };
 234
 235                 watchdog: watchdog@4067e8 {
 236                         clocks = <&upg_clk>;
 237                         compatible = "brcm,bcm7038-wdt";
 238                         reg = <0x4067e8 0x14>;
 239                         status = "disabled";
 240                 };
 241
 242                 aon_pm_l2_intc: interrupt-controller@408440 {
 243                         compatible = "brcm,l2-intc";
 244                         reg = <0x408440 0x30>;
 245                         interrupt-controller;
 246                         #interrupt-cells = <1>;
 247                         interrupt-parent = <&periph_intc>;
 248                         interrupts = <49>;
 249                         brcm,irq-can-wake;
 250                 };
 251
 252                 aon_ctrl: syscon@408000 {
 253                         compatible = "brcm,brcmstb-aon-ctrl";
 254                         reg = <0x408000 0x100>, <0x408200 0x200>;
 255                         reg-names = "aon-ctrl", "aon-sram";
 256                 };
 257
 258                 timers: timer@4067c0 {
 259                         compatible = "brcm,brcmstb-timers";
 260                         reg = <0x4067c0 0x40>;
 261                 };
 262
 263                 upg_gio: gpio@406700 {
 264                         compatible = "brcm,brcmstb-gpio";
 265                         reg = <0x406700 0x80>;
 266                         #gpio-cells = <2>;
 267                         #interrupt-cells = <2>;
 268                         gpio-controller;
 269                         interrupt-controller;
 270                         interrupt-parent = <&upg_irq0_intc>;
 271                         interrupts = <6>;
 272                         brcm,gpio-bank-widths = <32 32 32 21>;
 273                 };
 274
 275                 upg_gio_aon: gpio@4094c0 {
 276                         compatible = "brcm,brcmstb-gpio";
 277                         reg = <0x4094c0 0x40>;
 278                         #gpio-cells = <2>;
 279                         #interrupt-cells = <2>;
 280                         gpio-controller;
 281                         interrupt-controller;
 282                         interrupt-parent = <&upg_aon_irq0_intc>;
 283                         interrupts = <6>;
 284                         interrupts-extended = <&upg_aon_irq0_intc 6>,
 285                                               <&aon_pm_l2_intc 5>;
 286                         wakeup-source;
 287                         brcm,gpio-bank-widths = <18 4>;
 288                 };
 289
 290                 enet0: ethernet@b80000 {
 291                         phy-mode = "internal";
 292                         phy-handle = <&phy1>;
 293                         mac-address = [ 00 10 18 36 23 1a ];
 294                         compatible = "brcm,genet-v3";
 295                         #address-cells = <0x1>;
 296                         #size-cells = <0x1>;
 297                         reg = <0xb80000 0x11c88>;
 298                         interrupts = <17>, <18>;
 299                         interrupt-parent = <&periph_intc>;
 300                         status = "disabled";
 301
 302                         mdio@e14 {
 303                                 compatible = "brcm,genet-mdio-v3";
 304                                 #address-cells = <0x1>;
 305                                 #size-cells = <0x0>;
 306                                 reg = <0xe14 0x8>;
 307
 308                                 phy1: ethernet-phy@1 {
 309                                         max-speed = <100>;
 310                                         reg = <0x1>;
 311                                         compatible = "brcm,40nm-ephy",
 312                                                 "ethernet-phy-ieee802.3-c22";
 313                                 };
 314                         };
 315                 };
 316
 317                 ehci0: usb@480300 {
 318                         compatible = "brcm,bcm7425-ehci", "generic-ehci";
 319                         reg = <0x480300 0x100>;
 320                         native-endian;
 321                         interrupt-parent = <&periph_intc>;
 322                         interrupts = <65>;
 323                         status = "disabled";
 324                 };
 325
 326                 ohci0: usb@480400 {
 327                         compatible = "brcm,bcm7425-ohci", "generic-ohci";
 328                         reg = <0x480400 0x100>;
 329                         native-endian;
 330                         no-big-frame-no;
 331                         interrupt-parent = <&periph_intc>;
 332                         interrupts = <67>;
 333                         status = "disabled";
 334                 };
 335
 336                 ehci1: usb@480500 {
 337                         compatible = "brcm,bcm7425-ehci", "generic-ehci";
 338                         reg = <0x480500 0x100>;
 339                         native-endian;
 340                         interrupt-parent = <&periph_intc>;
 341                         interrupts = <66>;
 342                         status = "disabled";
 343                 };
 344
 345                 ohci1: usb@480600 {
 346                         compatible = "brcm,bcm7425-ohci", "generic-ohci";
 347                         reg = <0x480600 0x100>;
 348                         native-endian;
 349                         no-big-frame-no;
 350                         interrupt-parent = <&periph_intc>;
 351                         interrupts = <68>;
 352                         status = "disabled";
 353                 };
 354
 355                 ehci2: usb@490300 {
 356                         compatible = "brcm,bcm7425-ehci", "generic-ehci";
 357                         reg = <0x490300 0x100>;
 358                         native-endian;
 359                         interrupt-parent = <&periph_intc>;
 360                         interrupts = <70>;
 361                         status = "disabled";
 362                 };
 363
 364                 ohci2: usb@490400 {
 365                         compatible = "brcm,bcm7425-ohci", "generic-ohci";
 366                         reg = <0x490400 0x100>;
 367                         native-endian;
 368                         no-big-frame-no;
 369                         interrupt-parent = <&periph_intc>;
 370                         interrupts = <72>;
 371                         status = "disabled";
 372                 };
 373
 374                 ehci3: usb@490500 {
 375                         compatible = "brcm,bcm7425-ehci", "generic-ehci";
 376                         reg = <0x490500 0x100>;
 377                         native-endian;
 378                         interrupt-parent = <&periph_intc>;
 379                         interrupts = <71>;
 380                         status = "disabled";
 381                 };
 382
 383                 ohci3: usb@490600 {
 384                         compatible = "brcm,bcm7425-ohci", "generic-ohci";
 385                         reg = <0x490600 0x100>;
 386                         native-endian;
 387                         no-big-frame-no;
 388                         interrupt-parent = <&periph_intc>;
 389                         interrupts = <73>;
 390                         status = "disabled";
 391                 };
 392
 393                 hif_l2_intc: interrupt-controller@41a000 {
 394                         compatible = "brcm,l2-intc";
 395                         reg = <0x41a000 0x30>;
 396                         interrupt-controller;
 397                         #interrupt-cells = <1>;
 398                         interrupt-parent = <&periph_intc>;
 399                         interrupts = <24>;
 400                 };
 401
 402                 nand: nand@41b800 {
 403                         compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
 404                         #address-cells = <1>;
 405                         #size-cells = <0>;
 406                         reg-names = "nand";
 407                         reg = <0x41b800 0x400>;
 408                         interrupt-parent = <&hif_l2_intc>;
 409                         interrupts = <24>;
 410                         status = "disabled";
 411                 };
 412
 413                 sata: sata@181000 {
 414                         compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 415                         reg-names = "ahci", "top-ctrl";
 416                         reg = <0x181000 0xa9c>, <0x180020 0x1c>;
 417                         interrupt-parent = <&periph_intc>;
 418                         interrupts = <41>;
 419                         #address-cells = <1>;
 420                         #size-cells = <0>;
 421                         status = "disabled";
 422
 423                         sata0: sata-port@0 {
 424                                 reg = <0>;
 425                                 phys = <&sata_phy0>;
 426                         };
 427
 428                         sata1: sata-port@1 {
 429                                 reg = <1>;
 430                                 phys = <&sata_phy1>;
 431                         };
 432                 };
 433
 434                 sata_phy: sata-phy@180100 {
 435                         compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
 436                         reg = <0x180100 0x0eff>;
 437                         reg-names = "phy";
 438                         #address-cells = <1>;
 439                         #size-cells = <0>;
 440                         status = "disabled";
 441
 442                         sata_phy0: sata-phy@0 {
 443                                 reg = <0>;
 444                                 #phy-cells = <0>;
 445                         };
 446
 447                         sata_phy1: sata-phy@1 {
 448                                 reg = <1>;
 449                                 #phy-cells = <0>;
 450                         };
 451                 };
 452
 453                 sdhci0: sdhci@419000 {
 454                         compatible = "brcm,bcm7425-sdhci";
 455                         reg = <0x419000 0x100>;
 456                         interrupt-parent = <&periph_intc>;
 457                         interrupts = <43>;
 458                         sd-uhs-sdr50;
 459                         mmc-hs200-1_8v;
 460                         status = "disabled";
 461                 };
 462
 463                 sdhci1: sdhci@419200 {
 464                         compatible = "brcm,bcm7425-sdhci";
 465                         reg = <0x419200 0x100>;
 466                         interrupt-parent = <&periph_intc>;
 467                         interrupts = <44>;
 468                         sd-uhs-sdr50;
 469                         mmc-hs200-1_8v;
 470                         status = "disabled";
 471                 };
 472
 473                 spi_l2_intc: interrupt-controller@41ad00 {
 474                         compatible = "brcm,l2-intc";
 475                         reg = <0x41ad00 0x30>;
 476                         interrupt-controller;
 477                         #interrupt-cells = <1>;
 478                         interrupt-parent = <&periph_intc>;
 479                         interrupts = <25>;
 480                 };
 481
 482                 qspi: spi@41c000 {
 483                         #address-cells = <0x1>;
 484                         #size-cells = <0x0>;
 485                         compatible = "brcm,spi-bcm-qspi",
 486                                      "brcm,spi-brcmstb-qspi";
 487                         clocks = <&upg_clk>;
 488                         reg = <0x419920 0x4 0x41c200 0x188 0x41c000 0x50>;
 489                         reg-names = "cs_reg", "hif_mspi", "bspi";
 490                         interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
 491                         interrupt-parent = <&spi_l2_intc>;
 492                         interrupt-names = "spi_lr_fullness_reached",
 493                                           "spi_lr_session_aborted",
 494                                           "spi_lr_impatient",
 495                                           "spi_lr_session_done",
 496                                           "spi_lr_overread",
 497                                           "mspi_done",
 498                                           "mspi_halted";
 499                         status = "disabled";
 500                 };
 501
 502                 mspi: spi@409200 {
 503                         #address-cells = <1>;
 504                         #size-cells = <0>;
 505                         compatible = "brcm,spi-bcm-qspi",
 506                                      "brcm,spi-brcmstb-mspi";
 507                         clocks = <&upg_clk>;
 508                         reg = <0x409200 0x180>;
 509                         reg-names = "mspi";
 510                         interrupts = <0x14>;
 511                         interrupt-parent = <&upg_aon_irq0_intc>;
 512                         interrupt-names = "mspi_done";
 513                         status = "disabled";
 514                 };
 515
 516                 waketimer: waketimer@409580 {
 517                         compatible = "brcm,brcmstb-waketimer";
 518                         reg = <0x409580 0x14>;
 519                         interrupts = <0x3>;
 520                         interrupt-parent = <&aon_pm_l2_intc>;
 521                         interrupt-names = "timer";
 522                         clocks = <&upg_clk>;
 523                         status = "disabled";
 524                 };
 525         };
 526
 527         memory_controllers {
 528                 compatible = "simple-bus";
 529                 ranges = <0x0 0x103b0000 0x1a000>;
 530                 #address-cells = <1>;
 531                 #size-cells = <1>;
 532
 533                 memory-controller@0 {
 534                         compatible = "brcm,brcmstb-memc", "simple-bus";
 535                         ranges = <0x0 0x0 0xa000>;
 536                         #address-cells = <1>;
 537                         #size-cells = <1>;
 538
 539                         memc-arb@1000 {
 540                                 compatible = "brcm,brcmstb-memc-arb";
 541                                 reg = <0x1000 0x248>;
 542                         };
 543
 544                         memc-ddr@2000 {
 545                                 compatible = "brcm,brcmstb-memc-ddr";
 546                                 reg = <0x2000 0x300>;
 547                         };
 548
 549                         ddr-phy@6000 {
 550                                 compatible = "brcm,brcmstb-ddr-phy";
 551                                 reg = <0x6000 0xc8>;
 552                         };
 553
 554                         shimphy@8000 {
 555                                 compatible = "brcm,brcmstb-ddr-shimphy";
 556                                 reg = <0x8000 0x13c>;
 557                         };
 558                 };
 559
 560                 memory-controller@1 {
 561                         compatible = "brcm,brcmstb-memc", "simple-bus";
 562                         ranges = <0x0 0x10000 0xa000>;
 563                         #address-cells = <1>;
 564                         #size-cells = <1>;
 565
 566                         memc-arb@1000 {
 567                                 compatible = "brcm,brcmstb-memc-arb";
 568                                 reg = <0x1000 0x248>;
 569                         };
 570
 571                         memc-ddr@2000 {
 572                                 compatible = "brcm,brcmstb-memc-ddr";
 573                                 reg = <0x2000 0x300>;
 574                         };
 575
 576                         ddr-phy@6000 {
 577                                 compatible = "brcm,brcmstb-ddr-phy";
 578                                 reg = <0x6000 0xc8>;
 579                         };
 580
 581                         shimphy@8000 {
 582                                 compatible = "brcm,brcmstb-ddr-shimphy";
 583                                 reg = <0x8000 0x13c>;
 584                         };
 585                 };
 586         };
 587 };