1 // SPDX-License-Identifier: GPL-2.0
2 /***************************************************************************/
5 * m5307.c -- platform support for ColdFire 5307 based boards
7 * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
8 * Copyright (C) 2000, Lineo (www.lineo.com)
11 /***************************************************************************/
13 #include <linux/clkdev.h>
14 #include <linux/kernel.h>
15 #include <linux/param.h>
16 #include <linux/init.h>
18 #include <asm/machdep.h>
19 #include <asm/coldfire.h>
20 #include <asm/mcfsim.h>
21 #include <asm/mcfwdebug.h>
22 #include <asm/mcfclk.h>
24 /***************************************************************************/
27 * Some platforms need software versions of the GPIO data registers.
29 unsigned short ppdata;
30 unsigned char ledbank = 0xff;
32 /***************************************************************************/
34 DEFINE_CLK(pll, "pll.0", MCF_CLK);
35 DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
37 static struct clk_lookup m5307_clk_lookup[] = {
38 CLKDEV_INIT(NULL, "pll.0", &clk_pll),
39 CLKDEV_INIT(NULL, "sys.0", &clk_sys),
40 CLKDEV_INIT("mcftmr.0", NULL, &clk_sys),
41 CLKDEV_INIT("mcftmr.1", NULL, &clk_sys),
42 CLKDEV_INIT("mcfuart.0", NULL, &clk_sys),
43 CLKDEV_INIT("mcfuart.1", NULL, &clk_sys),
44 CLKDEV_INIT("imx1-i2c.0", NULL, &clk_sys),
47 /***************************************************************************/
49 static void __init m5307_i2c_init(void)
51 #if IS_ENABLED(CONFIG_I2C_IMX)
52 writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
54 mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
55 #endif /* IS_ENABLED(CONFIG_I2C_IMX) */
58 /***************************************************************************/
60 void __init config_BSP(char *commandp, int size)
62 #if defined(CONFIG_NETtel) || \
63 defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
64 /* Copy command line from FLASH to local buffer... */
65 memcpy(commandp, (char *) 0xf0004000, size);
69 mach_sched_init = hw_timer_init;
71 /* Only support the external interrupts on their primary level */
72 mcf_mapirq2imr(25, MCFINTC_EINT1);
73 mcf_mapirq2imr(27, MCFINTC_EINT3);
74 mcf_mapirq2imr(29, MCFINTC_EINT5);
75 mcf_mapirq2imr(31, MCFINTC_EINT7);
77 #ifdef CONFIG_BDM_DISABLE
79 * Disable the BDM clocking. This also turns off most of the rest of
80 * the BDM device. This is good for EMC reasons. This option is not
81 * incompatible with the memory protection option.
83 wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
87 clkdev_add_table(m5307_clk_lookup, ARRAY_SIZE(m5307_clk_lookup));
90 /***************************************************************************/