1 /* SPDX-License-Identifier: GPL-2.0-only */
3 * arch/arm64/include/asm/arch_gicv3.h
5 * Copyright (C) 2015 ARM Ltd.
7 #ifndef __ASM_ARCH_GICV3_H
8 #define __ASM_ARCH_GICV3_H
10 #include <asm/sysreg.h>
14 #include <linux/irqchip/arm-gic-common.h>
15 #include <linux/stringify.h>
16 #include <asm/barrier.h>
17 #include <asm/cacheflush.h>
19 #define read_gicreg(r) read_sysreg_s(SYS_ ## r)
20 #define write_gicreg(v, r) write_sysreg_s(v, SYS_ ## r)
25 * These system registers are 32 bits, but we make sure that the compiler
26 * sets the GP register's most significant bits to 0 with an explicit cast.
29 static __always_inline void gic_write_dir(u32 irq)
31 write_sysreg_s(irq, SYS_ICC_DIR_EL1);
35 static inline u64 gic_read_iar_common(void)
39 irqstat = read_sysreg_s(SYS_ICC_IAR1_EL1);
45 * Cavium ThunderX erratum 23154
47 * The gicv3 of ThunderX requires a modified version for reading the
48 * IAR status to ensure data synchronization (access to icc_iar1_el1
49 * is not sync'ed before and after).
53 * When a IAR register read races with a GIC interrupt RELEASE event,
54 * GIC-CPU interface could wrongly return a valid INTID to the CPU
55 * for an interrupt that is already released(non activated) instead of 0x3ff.
57 * To workaround this, return a valid interrupt ID only if there is a change
58 * in the active priority list after the IAR read.
60 * Common function used for both the workarounds since,
61 * 1. On Thunderx 88xx 1.x both erratas are applicable.
62 * 2. Having extra nops doesn't add any side effects for Silicons where
63 * erratum 23154 is not applicable.
65 static inline u64 gic_read_iar_cavium_thunderx(void)
69 apr = read_sysreg_s(SYS_ICC_AP1R0_EL1);
71 irqstat = read_sysreg_s(SYS_ICC_IAR1_EL1);
75 /* Max priority groups implemented is only 32 */
76 if (likely(apr != read_sysreg_s(SYS_ICC_AP1R0_EL1)))
82 static inline void gic_write_ctlr(u32 val)
84 write_sysreg_s(val, SYS_ICC_CTLR_EL1);
88 static inline u32 gic_read_ctlr(void)
90 return read_sysreg_s(SYS_ICC_CTLR_EL1);
93 static inline void gic_write_grpen1(u32 val)
95 write_sysreg_s(val, SYS_ICC_IGRPEN1_EL1);
99 static inline void gic_write_sgi1r(u64 val)
101 write_sysreg_s(val, SYS_ICC_SGI1R_EL1);
104 static inline u32 gic_read_sre(void)
106 return read_sysreg_s(SYS_ICC_SRE_EL1);
109 static inline void gic_write_sre(u32 val)
111 write_sysreg_s(val, SYS_ICC_SRE_EL1);
115 static inline void gic_write_bpr1(u32 val)
117 write_sysreg_s(val, SYS_ICC_BPR1_EL1);
120 static inline u32 gic_read_pmr(void)
122 return read_sysreg_s(SYS_ICC_PMR_EL1);
125 static __always_inline void gic_write_pmr(u32 val)
127 write_sysreg_s(val, SYS_ICC_PMR_EL1);
130 static inline u32 gic_read_rpr(void)
132 return read_sysreg_s(SYS_ICC_RPR_EL1);
135 #define gic_read_typer(c) readq_relaxed(c)
136 #define gic_write_irouter(v, c) writeq_relaxed(v, c)
137 #define gic_read_lpir(c) readq_relaxed(c)
138 #define gic_write_lpir(v, c) writeq_relaxed(v, c)
140 #define gic_flush_dcache_to_poc(a,l) \
141 dcache_clean_inval_poc((unsigned long)(a), (unsigned long)(a)+(l))
143 #define gits_read_baser(c) readq_relaxed(c)
144 #define gits_write_baser(v, c) writeq_relaxed(v, c)
146 #define gits_read_cbaser(c) readq_relaxed(c)
147 #define gits_write_cbaser(v, c) writeq_relaxed(v, c)
149 #define gits_write_cwriter(v, c) writeq_relaxed(v, c)
151 #define gicr_read_propbaser(c) readq_relaxed(c)
152 #define gicr_write_propbaser(v, c) writeq_relaxed(v, c)
154 #define gicr_write_pendbaser(v, c) writeq_relaxed(v, c)
155 #define gicr_read_pendbaser(c) readq_relaxed(c)
157 #define gicr_write_vpropbaser(v, c) writeq_relaxed(v, c)
158 #define gicr_read_vpropbaser(c) readq_relaxed(c)
160 #define gicr_write_vpendbaser(v, c) writeq_relaxed(v, c)
161 #define gicr_read_vpendbaser(c) readq_relaxed(c)
163 static inline bool gic_prio_masking_enabled(void)
165 return system_uses_irq_prio_masking();
168 static inline void gic_pmr_mask_irqs(void)
170 BUILD_BUG_ON(GICD_INT_DEF_PRI < (__GIC_PRIO_IRQOFF |
171 GIC_PRIO_PSR_I_SET));
172 BUILD_BUG_ON(GICD_INT_DEF_PRI >= GIC_PRIO_IRQON);
174 * Need to make sure IRQON allows IRQs when SCR_EL3.FIQ is cleared
175 * and non-secure PMR accesses are not subject to the shifts that
176 * are applied to IRQ priorities
178 BUILD_BUG_ON((0x80 | (GICD_INT_DEF_PRI >> 1)) >= GIC_PRIO_IRQON);
180 * Same situation as above, but now we make sure that we can mask
181 * regular interrupts.
183 BUILD_BUG_ON((0x80 | (GICD_INT_DEF_PRI >> 1)) < (__GIC_PRIO_IRQOFF_NS |
184 GIC_PRIO_PSR_I_SET));
185 gic_write_pmr(GIC_PRIO_IRQOFF);
188 static inline void gic_arch_enable_irqs(void)
190 asm volatile ("msr daifclr, #3" : : : "memory");
193 #endif /* __ASSEMBLY__ */
194 #endif /* __ASM_ARCH_GICV3_H */