arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * dts file for Xilinx ZynqMP ZCU111
   4  *
   5  * (C) Copyright 2017 - 2022, Xilinx, Inc.
   6  * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
   7  *
   8  * Michal Simek <michal.simek@amd.com>
   9  */
  10
  11 /dts-v1/;
  12
  13 #include "zynqmp.dtsi"
  14 #include "zynqmp-clk-ccf.dtsi"
  15 #include <dt-bindings/input/input.h>
  16 #include <dt-bindings/gpio/gpio.h>
  17 #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
  18 #include <dt-bindings/phy/phy.h>
  19
  20 / {
  21         model = "ZynqMP ZCU111 RevA";
  22         compatible = "xlnx,zynqmp-zcu111-revA", "xlnx,zynqmp-zcu111", "xlnx,zynqmp";
  23
  24         aliases {
  25                 ethernet0 = &gem3;
  26                 i2c0 = &i2c0;
  27                 i2c1 = &i2c1;
  28                 mmc0 = &sdhci1;
  29                 nvmem0 = &eeprom;
  30                 rtc0 = &rtc;
  31                 serial0 = &uart0;
  32                 serial1 = &dcc;
  33                 spi0 = &qspi;
  34                 usb0 = &usb0;
  35         };
  36
  37         chosen {
  38                 bootargs = "earlycon";
  39                 stdout-path = "serial0:115200n8";
  40         };
  41
  42         memory@0 {
  43                 device_type = "memory";
  44                 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
  45                 /* Another 4GB connected to PL */
  46         };
  47
  48         gpio-keys {
  49                 compatible = "gpio-keys";
  50                 autorepeat;
  51                 switch-19 {
  52                         label = "sw19";
  53                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  54                         linux,code = <KEY_DOWN>;
  55                         wakeup-source;
  56                         autorepeat;
  57                 };
  58         };
  59
  60         leds {
  61                 compatible = "gpio-leds";
  62                 heartbeat-led {
  63                         label = "heartbeat";
  64                         gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
  65                         linux,default-trigger = "heartbeat";
  66                 };
  67         };
  68
  69         ina226-u67 {
  70                 compatible = "iio-hwmon";
  71                 io-channels = <&u67 0>, <&u67 1>, <&u67 2>, <&u67 3>;
  72         };
  73         ina226-u59 {
  74                 compatible = "iio-hwmon";
  75                 io-channels = <&u59 0>, <&u59 1>, <&u59 2>, <&u59 3>;
  76         };
  77         ina226-u61 {
  78                 compatible = "iio-hwmon";
  79                 io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>;
  80         };
  81         ina226-u60 {
  82                 compatible = "iio-hwmon";
  83                 io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>;
  84         };
  85         ina226-u64 {
  86                 compatible = "iio-hwmon";
  87                 io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>;
  88         };
  89         ina226-u69 {
  90                 compatible = "iio-hwmon";
  91                 io-channels = <&u69 0>, <&u69 1>, <&u69 2>, <&u69 3>;
  92         };
  93         ina226-u66 {
  94                 compatible = "iio-hwmon";
  95                 io-channels = <&u66 0>, <&u66 1>, <&u66 2>, <&u66 3>;
  96         };
  97         ina226-u65 {
  98                 compatible = "iio-hwmon";
  99                 io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
 100         };
 101         ina226-u63 {
 102                 compatible = "iio-hwmon";
 103                 io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>;
 104         };
 105         ina226-u3 {
 106                 compatible = "iio-hwmon";
 107                 io-channels = <&u3 0>, <&u3 1>, <&u3 2>, <&u3 3>;
 108         };
 109         ina226-u71 {
 110                 compatible = "iio-hwmon";
 111                 io-channels = <&u71 0>, <&u71 1>, <&u71 2>, <&u71 3>;
 112         };
 113         ina226-u77 {
 114                 compatible = "iio-hwmon";
 115                 io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
 116         };
 117         ina226-u73 {
 118                 compatible = "iio-hwmon";
 119                 io-channels = <&u73 0>, <&u73 1>, <&u73 2>, <&u73 3>;
 120         };
 121         ina226-u79 {
 122                 compatible = "iio-hwmon";
 123                 io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
 124         };
 125
 126         /* 48MHz reference crystal */
 127         ref48: ref48M {
 128                 compatible = "fixed-clock";
 129                 #clock-cells = <0>;
 130                 clock-frequency = <48000000>;
 131         };
 132 };
 133
 134 &dcc {
 135         status = "okay";
 136 };
 137
 138 &fpd_dma_chan1 {
 139         status = "okay";
 140 };
 141
 142 &fpd_dma_chan2 {
 143         status = "okay";
 144 };
 145
 146 &fpd_dma_chan3 {
 147         status = "okay";
 148 };
 149
 150 &fpd_dma_chan4 {
 151         status = "okay";
 152 };
 153
 154 &fpd_dma_chan5 {
 155         status = "okay";
 156 };
 157
 158 &fpd_dma_chan6 {
 159         status = "okay";
 160 };
 161
 162 &fpd_dma_chan7 {
 163         status = "okay";
 164 };
 165
 166 &fpd_dma_chan8 {
 167         status = "okay";
 168 };
 169
 170 &gem3 {
 171         status = "okay";
 172         phy-handle = <&phy0>;
 173         phy-mode = "rgmii-id";
 174         pinctrl-names = "default";
 175         pinctrl-0 = <&pinctrl_gem3_default>;
 176         mdio: mdio {
 177                 #address-cells = <1>;
 178                 #size-cells = <0>;
 179                 phy0: ethernet-phy@c {
 180                         #phy-cells = <1>;
 181                         compatible = "ethernet-phy-id2000.a231";
 182                         reg = <0xc>;
 183                         ti,rx-internal-delay = <0x8>;
 184                         ti,tx-internal-delay = <0xa>;
 185                         ti,fifo-depth = <0x1>;
 186                         ti,dp83867-rxctrl-strap-quirk;
 187                         reset-gpios = <&tca6416_u22 6 GPIO_ACTIVE_LOW>;
 188                 };
 189         };
 190 };
 191
 192 &gpio {
 193         status = "okay";
 194         pinctrl-names = "default";
 195         pinctrl-0 = <&pinctrl_gpio_default>;
 196 };
 197
 198 &gpu {
 199         status = "okay";
 200 };
 201
 202 &i2c0 {
 203         status = "okay";
 204         clock-frequency = <400000>;
 205         pinctrl-names = "default", "gpio";
 206         pinctrl-0 = <&pinctrl_i2c0_default>;
 207         pinctrl-1 = <&pinctrl_i2c0_gpio>;
 208         scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 209         sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 210
 211         tca6416_u22: gpio@20 {
 212                 compatible = "ti,tca6416";
 213                 reg = <0x20>;
 214                 gpio-controller; /* interrupt not connected */
 215                 #gpio-cells = <2>;
 216                 /*
 217                  * IRQ not connected
 218                  * Lines:
 219                  * 0 - MAX6643_OT_B
 220                  * 1 - MAX6643_FANFAIL_B
 221                  * 2 - MIO26_PMU_INPUT_LS
 222                  * 4 - SFP_SI5382_INT_ALM
 223                  * 5 - IIC_MUX_RESET_B
 224                  * 6 - GEM3_EXP_RESET_B
 225                  * 10 - FMCP_HSPC_PRSNT_M2C_B
 226                  * 11 - CLK_SPI_MUX_SEL0
 227                  * 12 - CLK_SPI_MUX_SEL1
 228                  * 16 - IRPS5401_ALERT_B
 229                  * 17 - INA226_PMBUS_ALERT
 230                  * 3, 7, 13-15 - not connected
 231                  */
 232         };
 233
 234         i2c-mux@75 { /* u23 */
 235                 compatible = "nxp,pca9544";
 236                 #address-cells = <1>;
 237                 #size-cells = <0>;
 238                 reg = <0x75>;
 239                 i2c@0 {
 240                         #address-cells = <1>;
 241                         #size-cells = <0>;
 242                         reg = <0>;
 243                         /* PS_PMBUS */
 244                         /* PMBUS_ALERT done via pca9544 */
 245                         u67: ina226@40 { /* u67 */
 246                                 compatible = "ti,ina226";
 247                                 #io-channel-cells = <1>;
 248                                 label = "ina226-u67";
 249                                 reg = <0x40>;
 250                                 shunt-resistor = <2000>;
 251                         };
 252                         u59: ina226@41 { /* u59 */
 253                                 compatible = "ti,ina226";
 254                                 #io-channel-cells = <1>;
 255                                 label = "ina226-u59";
 256                                 reg = <0x41>;
 257                                 shunt-resistor = <5000>;
 258                         };
 259                         u61: ina226@42 { /* u61 */
 260                                 compatible = "ti,ina226";
 261                                 #io-channel-cells = <1>;
 262                                 label = "ina226-u61";
 263                                 reg = <0x42>;
 264                                 shunt-resistor = <5000>;
 265                         };
 266                         u60: ina226@43 { /* u60 */
 267                                 compatible = "ti,ina226";
 268                                 #io-channel-cells = <1>;
 269                                 label = "ina226-u60";
 270                                 reg = <0x43>;
 271                                 shunt-resistor = <5000>;
 272                         };
 273                         u64: ina226@45 { /* u64 */
 274                                 compatible = "ti,ina226";
 275                                 #io-channel-cells = <1>;
 276                                 label = "ina226-u64";
 277                                 reg = <0x45>;
 278                                 shunt-resistor = <5000>;
 279                         };
 280                         u69: ina226@46 { /* u69 */
 281                                 compatible = "ti,ina226";
 282                                 #io-channel-cells = <1>;
 283                                 label = "ina226-u69";
 284                                 reg = <0x46>;
 285                                 shunt-resistor = <2000>;
 286                         };
 287                         u66: ina226@47 { /* u66 */
 288                                 compatible = "ti,ina226";
 289                                 #io-channel-cells = <1>;
 290                                 label = "ina226-u66";
 291                                 reg = <0x47>;
 292                                 shunt-resistor = <5000>;
 293                         };
 294                         u65: ina226@48 { /* u65 */
 295                                 compatible = "ti,ina226";
 296                                 #io-channel-cells = <1>;
 297                                 label = "ina226-u65";
 298                                 reg = <0x48>;
 299                                 shunt-resistor = <5000>;
 300                         };
 301                         u63: ina226@49 { /* u63 */
 302                                 compatible = "ti,ina226";
 303                                 #io-channel-cells = <1>;
 304                                 label = "ina226-u63";
 305                                 reg = <0x49>;
 306                                 shunt-resistor = <5000>;
 307                         };
 308                         u3: ina226@4a { /* u3 */
 309                                 compatible = "ti,ina226";
 310                                 #io-channel-cells = <1>;
 311                                 label = "ina226-u3";
 312                                 reg = <0x4a>;
 313                                 shunt-resistor = <5000>;
 314                         };
 315                         u71: ina226@4b { /* u71 */
 316                                 compatible = "ti,ina226";
 317                                 #io-channel-cells = <1>;
 318                                 label = "ina226-u71";
 319                                 reg = <0x4b>;
 320                                 shunt-resistor = <5000>;
 321                         };
 322                         u77: ina226@4c { /* u77 */
 323                                 compatible = "ti,ina226";
 324                                 #io-channel-cells = <1>;
 325                                 label = "ina226-u77";
 326                                 reg = <0x4c>;
 327                                 shunt-resistor = <5000>;
 328                         };
 329                         u73: ina226@4d { /* u73 */
 330                                 compatible = "ti,ina226";
 331                                 #io-channel-cells = <1>;
 332                                 label = "ina226-u73";
 333                                 reg = <0x4d>;
 334                                 shunt-resistor = <5000>;
 335                         };
 336                         u79: ina226@4e { /* u79 */
 337                                 compatible = "ti,ina226";
 338                                 #io-channel-cells = <1>;
 339                                 label = "ina226-u79";
 340                                 reg = <0x4e>;
 341                                 shunt-resistor = <5000>;
 342                         };
 343                 };
 344                 i2c@1 {
 345                         #address-cells = <1>;
 346                         #size-cells = <0>;
 347                         reg = <1>;
 348                         /* NC */
 349                 };
 350                 i2c@2 {
 351                         #address-cells = <1>;
 352                         #size-cells = <0>;
 353                         reg = <2>;
 354                         irps5401_43: irps5401@43 { /* IRPS5401 - u53 check these */
 355                                 compatible = "infineon,irps5401";
 356                                 reg = <0x43>;
 357                         };
 358                         irps5401_44: irps5401@44 { /* IRPS5401 - u55 */
 359                                 compatible = "infineon,irps5401";
 360                                 reg = <0x44>;
 361                         };
 362                         irps5401_45: irps5401@45 { /* IRPS5401 - u57 */
 363                                 compatible = "infineon,irps5401";
 364                                 reg = <0x45>;
 365                         };
 366                         /* u68 IR38064 +0 */
 367                         /* u70 IR38060 +1 */
 368                         /* u74 IR38060 +2 */
 369                         /* u75 IR38060 +6 */
 370                         /* J19 header too */
 371
 372                 };
 373                 i2c@3 {
 374                         #address-cells = <1>;
 375                         #size-cells = <0>;
 376                         reg = <3>;
 377                         /* SYSMON */
 378                 };
 379         };
 380 };
 381
 382 &i2c1 {
 383         status = "okay";
 384         clock-frequency = <400000>;
 385         pinctrl-names = "default", "gpio";
 386         pinctrl-0 = <&pinctrl_i2c1_default>;
 387         pinctrl-1 = <&pinctrl_i2c1_gpio>;
 388         scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 389         sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 390
 391         i2c-mux@74 { /* u26 */
 392                 compatible = "nxp,pca9548";
 393                 #address-cells = <1>;
 394                 #size-cells = <0>;
 395                 reg = <0x74>;
 396                 i2c@0 {
 397                         #address-cells = <1>;
 398                         #size-cells = <0>;
 399                         reg = <0>;
 400                         /*
 401                          * IIC_EEPROM 1kB memory which uses 256B blocks
 402                          * where every block has different address.
 403                          *    0 - 256B address 0x54
 404                          * 256B - 512B address 0x55
 405                          * 512B - 768B address 0x56
 406                          * 768B - 1024B address 0x57
 407                          */
 408                         eeprom: eeprom@54 { /* u88 */
 409                                 compatible = "atmel,24c08";
 410                                 reg = <0x54>;
 411                         };
 412                 };
 413                 i2c@1 {
 414                         #address-cells = <1>;
 415                         #size-cells = <0>;
 416                         reg = <1>;
 417                         si5341: clock-generator@36 { /* SI5341 - u46 */
 418                                 compatible = "silabs,si5341";
 419                                 reg = <0x36>;
 420                                 #clock-cells = <2>;
 421                                 #address-cells = <1>;
 422                                 #size-cells = <0>;
 423                                 clocks = <&ref48>;
 424                                 clock-names = "xtal";
 425                                 clock-output-names = "si5341";
 426
 427                                 si5341_0: out@0 {
 428                                         /* refclk0 for PS-GT, used for DP */
 429                                         reg = <0>;
 430                                         always-on;
 431                                 };
 432                                 si5341_2: out@2 {
 433                                         /* refclk2 for PS-GT, used for USB3 */
 434                                         reg = <2>;
 435                                         always-on;
 436                                 };
 437                                 si5341_3: out@3 {
 438                                         /* refclk3 for PS-GT, used for SATA */
 439                                         reg = <3>;
 440                                         always-on;
 441                                 };
 442                                 si5341_5: out@5 {
 443                                         /* refclk5 PL CLK100 */
 444                                         reg = <5>;
 445                                         always-on;
 446                                 };
 447                                 si5341_6: out@6 {
 448                                         /* refclk6 PL CLK125 */
 449                                         reg = <6>;
 450                                         always-on;
 451                                 };
 452                                 si5341_9: out@9 {
 453                                         /* refclk9 used for PS_REF_CLK 33.3 MHz */
 454                                         reg = <9>;
 455                                         always-on;
 456                                 };
 457                         };
 458                 };
 459                 i2c@2 {
 460                         #address-cells = <1>;
 461                         #size-cells = <0>;
 462                         reg = <2>;
 463                         si570_1: clock-generator@5d { /* USER SI570 - u47 */
 464                                 #clock-cells = <0>;
 465                                 compatible = "silabs,si570";
 466                                 reg = <0x5d>;
 467                                 temperature-stability = <50>;
 468                                 factory-fout = <300000000>;
 469                                 clock-frequency = <300000000>;
 470                                 clock-output-names = "si570_user";
 471                         };
 472                 };
 473                 i2c@3 {
 474                         #address-cells = <1>;
 475                         #size-cells = <0>;
 476                         reg = <3>;
 477                         si570_2: clock-generator@5d { /* USER MGT SI570 - u49 */
 478                                 #clock-cells = <0>;
 479                                 compatible = "silabs,si570";
 480                                 reg = <0x5d>;
 481                                 temperature-stability = <50>;
 482                                 factory-fout = <156250000>;
 483                                 clock-frequency = <156250000>;
 484                                 clock-output-names = "si570_mgt";
 485                         };
 486                 };
 487                 i2c@4 {
 488                         #address-cells = <1>;
 489                         #size-cells = <0>;
 490                         reg = <4>;
 491                         /* SI5382 - u48 */
 492                 };
 493                 i2c@5 {
 494                         #address-cells = <1>;
 495                         #size-cells = <0>;
 496                         reg = <5>;
 497                                 sc18is603@2f { /* sc18is602 - u93 */
 498                                         compatible = "nxp,sc18is603";
 499                                         reg = <0x2f>;
 500                                         /* 4 gpios for CS not handled by driver */
 501                                         /*
 502                                          * USB2ANY cable or
 503                                          * LMK04208 - u90 or
 504                                          * LMX2594 - u102 or
 505                                          * LMX2594 - u103 or
 506                                          * LMX2594 - u104
 507                                          */
 508                                 };
 509                 };
 510                 i2c@6 {
 511                         #address-cells = <1>;
 512                         #size-cells = <0>;
 513                         reg = <6>;
 514                         /* FMC connector */
 515                 };
 516                 /* 7 NC */
 517         };
 518
 519         i2c-mux@75 {
 520                 compatible = "nxp,pca9548"; /* u27 */
 521                 #address-cells = <1>;
 522                 #size-cells = <0>;
 523                 reg = <0x75>;
 524
 525                 i2c@0 {
 526                         #address-cells = <1>;
 527                         #size-cells = <0>;
 528                         reg = <0>;
 529                         /* FMCP_HSPC_IIC */
 530                 };
 531                 i2c@1 {
 532                         #address-cells = <1>;
 533                         #size-cells = <0>;
 534                         reg = <1>;
 535                         /* NC */
 536                 };
 537                 i2c@2 {
 538                         #address-cells = <1>;
 539                         #size-cells = <0>;
 540                         reg = <2>;
 541                         /* SYSMON */
 542                 };
 543                 i2c@3 {
 544                         #address-cells = <1>;
 545                         #size-cells = <0>;
 546                         reg = <3>;
 547                         /* DDR4 SODIMM */
 548                 };
 549                 i2c@4 {
 550                         #address-cells = <1>;
 551                         #size-cells = <0>;
 552                         reg = <4>;
 553                         /* SFP3 */
 554                 };
 555                 i2c@5 {
 556                         #address-cells = <1>;
 557                         #size-cells = <0>;
 558                         reg = <5>;
 559                         /* SFP2 */
 560                 };
 561                 i2c@6 {
 562                         #address-cells = <1>;
 563                         #size-cells = <0>;
 564                         reg = <6>;
 565                         /* SFP1 */
 566                 };
 567                 i2c@7 {
 568                         #address-cells = <1>;
 569                         #size-cells = <0>;
 570                         reg = <7>;
 571                         /* SFP0 */
 572                 };
 573         };
 574 };
 575
 576 &pinctrl0 {
 577         status = "okay";
 578         pinctrl_i2c0_default: i2c0-default {
 579                 mux {
 580                         groups = "i2c0_3_grp";
 581                         function = "i2c0";
 582                 };
 583
 584                 conf {
 585                         groups = "i2c0_3_grp";
 586                         bias-pull-up;
 587                         slew-rate = <SLEW_RATE_SLOW>;
 588                         power-source = <IO_STANDARD_LVCMOS18>;
 589                 };
 590         };
 591
 592         pinctrl_i2c0_gpio: i2c0-gpio {
 593                 mux {
 594                         groups = "gpio0_14_grp", "gpio0_15_grp";
 595                         function = "gpio0";
 596                 };
 597
 598                 conf {
 599                         groups = "gpio0_14_grp", "gpio0_15_grp";
 600                         slew-rate = <SLEW_RATE_SLOW>;
 601                         power-source = <IO_STANDARD_LVCMOS18>;
 602                 };
 603         };
 604
 605         pinctrl_i2c1_default: i2c1-default {
 606                 mux {
 607                         groups = "i2c1_4_grp";
 608                         function = "i2c1";
 609                 };
 610
 611                 conf {
 612                         groups = "i2c1_4_grp";
 613                         bias-pull-up;
 614                         slew-rate = <SLEW_RATE_SLOW>;
 615                         power-source = <IO_STANDARD_LVCMOS18>;
 616                 };
 617         };
 618
 619         pinctrl_i2c1_gpio: i2c1-gpio {
 620                 mux {
 621                         groups = "gpio0_16_grp", "gpio0_17_grp";
 622                         function = "gpio0";
 623                 };
 624
 625                 conf {
 626                         groups = "gpio0_16_grp", "gpio0_17_grp";
 627                         slew-rate = <SLEW_RATE_SLOW>;
 628                         power-source = <IO_STANDARD_LVCMOS18>;
 629                 };
 630         };
 631
 632         pinctrl_uart0_default: uart0-default {
 633                 mux {
 634                         groups = "uart0_4_grp";
 635                         function = "uart0";
 636                 };
 637
 638                 conf {
 639                         groups = "uart0_4_grp";
 640                         slew-rate = <SLEW_RATE_SLOW>;
 641                         power-source = <IO_STANDARD_LVCMOS18>;
 642                 };
 643
 644                 conf-rx {
 645                         pins = "MIO18";
 646                         bias-high-impedance;
 647                 };
 648
 649                 conf-tx {
 650                         pins = "MIO19";
 651                         bias-disable;
 652                 };
 653         };
 654
 655         pinctrl_usb0_default: usb0-default {
 656                 mux {
 657                         groups = "usb0_0_grp";
 658                         function = "usb0";
 659                 };
 660
 661                 conf {
 662                         groups = "usb0_0_grp";
 663                         power-source = <IO_STANDARD_LVCMOS18>;
 664                 };
 665
 666                 conf-rx {
 667                         pins = "MIO52", "MIO53", "MIO55";
 668                         bias-high-impedance;
 669                         drive-strength = <12>;
 670                         slew-rate = <SLEW_RATE_FAST>;
 671                 };
 672
 673                 conf-tx {
 674                         pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
 675                                "MIO60", "MIO61", "MIO62", "MIO63";
 676                         bias-disable;
 677                         drive-strength = <4>;
 678                         slew-rate = <SLEW_RATE_SLOW>;
 679                 };
 680         };
 681
 682         pinctrl_gem3_default: gem3-default {
 683                 mux {
 684                         function = "ethernet3";
 685                         groups = "ethernet3_0_grp";
 686                 };
 687
 688                 conf {
 689                         groups = "ethernet3_0_grp";
 690                         slew-rate = <SLEW_RATE_SLOW>;
 691                         power-source = <IO_STANDARD_LVCMOS18>;
 692                 };
 693
 694                 conf-rx {
 695                         pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
 696                                                                         "MIO75";
 697                         bias-high-impedance;
 698                         low-power-disable;
 699                 };
 700
 701                 conf-tx {
 702                         pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
 703                                                                         "MIO69";
 704                         bias-disable;
 705                         low-power-enable;
 706                 };
 707
 708                 mux-mdio {
 709                         function = "mdio3";
 710                         groups = "mdio3_0_grp";
 711                 };
 712
 713                 conf-mdio {
 714                         groups = "mdio3_0_grp";
 715                         slew-rate = <SLEW_RATE_SLOW>;
 716                         power-source = <IO_STANDARD_LVCMOS18>;
 717                         bias-disable;
 718                 };
 719         };
 720
 721         pinctrl_sdhci1_default: sdhci1-default {
 722                 mux {
 723                         groups = "sdio1_0_grp";
 724                         function = "sdio1";
 725                 };
 726
 727                 conf {
 728                         groups = "sdio1_0_grp";
 729                         slew-rate = <SLEW_RATE_SLOW>;
 730                         power-source = <IO_STANDARD_LVCMOS18>;
 731                         bias-disable;
 732                 };
 733
 734                 mux-cd {
 735                         groups = "sdio1_cd_0_grp";
 736                         function = "sdio1_cd";
 737                 };
 738
 739                 conf-cd {
 740                         groups = "sdio1_cd_0_grp";
 741                         bias-high-impedance;
 742                         bias-pull-up;
 743                         slew-rate = <SLEW_RATE_SLOW>;
 744                         power-source = <IO_STANDARD_LVCMOS18>;
 745                 };
 746         };
 747
 748         pinctrl_gpio_default: gpio-default {
 749                 mux {
 750                         function = "gpio0";
 751                         groups = "gpio0_22_grp", "gpio0_23_grp";
 752                 };
 753
 754                 conf {
 755                         groups = "gpio0_22_grp", "gpio0_23_grp";
 756                         slew-rate = <SLEW_RATE_SLOW>;
 757                         power-source = <IO_STANDARD_LVCMOS18>;
 758                 };
 759
 760                 mux-msp {
 761                         function = "gpio0";
 762                         groups = "gpio0_13_grp", "gpio0_38_grp";
 763                 };
 764
 765                 conf-msp {
 766                         groups = "gpio0_13_grp", "gpio0_38_grp";
 767                         slew-rate = <SLEW_RATE_SLOW>;
 768                         power-source = <IO_STANDARD_LVCMOS18>;
 769                 };
 770
 771                 conf-pull-up {
 772                         pins = "MIO22";
 773                         bias-pull-up;
 774                 };
 775
 776                 conf-pull-none {
 777                         pins = "MIO13", "MIO23", "MIO38";
 778                         bias-disable;
 779                 };
 780         };
 781 };
 782
 783 &psgtr {
 784         status = "okay";
 785         /* nc, dp, usb3, sata */
 786         clocks = <&si5341 0 0>, <&si5341 0 2>, <&si5341 0 3>;
 787         clock-names = "ref1", "ref2", "ref3";
 788 };
 789
 790 &qspi {
 791         status = "okay";
 792         flash@0 {
 793                 compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */
 794                 #address-cells = <1>;
 795                 #size-cells = <1>;
 796                 reg = <0x0>;
 797                 spi-tx-bus-width = <4>;
 798                 spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 799                 spi-max-frequency = <108000000>; /* Based on DC1 spec */
 800         };
 801 };
 802
 803 &rtc {
 804         status = "okay";
 805 };
 806
 807 &sata {
 808         status = "okay";
 809         /* SATA OOB timing settings */
 810         ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
 811         ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
 812         ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
 813         ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
 814         ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
 815         ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
 816         ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
 817         ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
 818         phy-names = "sata-phy";
 819         phys = <&psgtr 3 PHY_TYPE_SATA 1 3>;
 820 };
 821
 822 /* SD1 with level shifter */
 823 &sdhci1 {
 824         status = "okay";
 825         pinctrl-names = "default";
 826         pinctrl-0 = <&pinctrl_sdhci1_default>;
 827         disable-wp;
 828         /*
 829          * This property should be removed for supporting UHS mode
 830          */
 831         no-1-8-v;
 832         xlnx,mio-bank = <1>;
 833 };
 834
 835 &uart0 {
 836         status = "okay";
 837         pinctrl-names = "default";
 838         pinctrl-0 = <&pinctrl_uart0_default>;
 839 };
 840
 841 /* ULPI SMSC USB3320 */
 842 &usb0 {
 843         status = "okay";
 844         pinctrl-names = "default";
 845         pinctrl-0 = <&pinctrl_usb0_default>;
 846         phy-names = "usb3-phy";
 847         phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
 848 };
 849
 850 &dwc3_0 {
 851         status = "okay";
 852         dr_mode = "host";
 853         snps,usb3_lpm_capable;
 854         maximum-speed = "super-speed";
 855 };
 856
 857 &zynqmp_dpdma {
 858         status = "okay";
 859 };
 860
 861 &zynqmp_dpsub {
 862         status = "okay";
 863         phy-names = "dp-phy0", "dp-phy1";
 864         phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
 865                <&psgtr 0 PHY_TYPE_DP 1 1>;
 866 };