arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * dts file for Xilinx ZynqMP ZCU106
   4  *
   5  * (C) Copyright 2016 - 2022, Xilinx, Inc.
   6  * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
   7  *
   8  * Michal Simek <michal.simek@amd.com>
   9  */
  10
  11 /dts-v1/;
  12
  13 #include "zynqmp.dtsi"
  14 #include "zynqmp-clk-ccf.dtsi"
  15 #include <dt-bindings/input/input.h>
  16 #include <dt-bindings/gpio/gpio.h>
  17 #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
  18 #include <dt-bindings/phy/phy.h>
  19
  20 / {
  21         model = "ZynqMP ZCU106 RevA";
  22         compatible = "xlnx,zynqmp-zcu106-revA", "xlnx,zynqmp-zcu106", "xlnx,zynqmp";
  23
  24         aliases {
  25                 ethernet0 = &gem3;
  26                 i2c0 = &i2c0;
  27                 i2c1 = &i2c1;
  28                 mmc0 = &sdhci1;
  29                 nvmem0 = &eeprom;
  30                 rtc0 = &rtc;
  31                 serial0 = &uart0;
  32                 serial1 = &uart1;
  33                 serial2 = &dcc;
  34                 spi0 = &qspi;
  35                 usb0 = &usb0;
  36         };
  37
  38         chosen {
  39                 bootargs = "earlycon";
  40                 stdout-path = "serial0:115200n8";
  41         };
  42
  43         memory@0 {
  44                 device_type = "memory";
  45                 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
  46         };
  47
  48         gpio-keys {
  49                 compatible = "gpio-keys";
  50                 autorepeat;
  51                 switch-19 {
  52                         label = "sw19";
  53                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  54                         linux,code = <KEY_DOWN>;
  55                         wakeup-source;
  56                         autorepeat;
  57                 };
  58         };
  59
  60         leds {
  61                 compatible = "gpio-leds";
  62                 heartbeat-led {
  63                         label = "heartbeat";
  64                         gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
  65                         linux,default-trigger = "heartbeat";
  66                 };
  67         };
  68
  69         ina226-u76 {
  70                 compatible = "iio-hwmon";
  71                 io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>;
  72         };
  73         ina226-u77 {
  74                 compatible = "iio-hwmon";
  75                 io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
  76         };
  77         ina226-u78 {
  78                 compatible = "iio-hwmon";
  79                 io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>;
  80         };
  81         ina226-u87 {
  82                 compatible = "iio-hwmon";
  83                 io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>;
  84         };
  85         ina226-u85 {
  86                 compatible = "iio-hwmon";
  87                 io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>;
  88         };
  89         ina226-u86 {
  90                 compatible = "iio-hwmon";
  91                 io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>;
  92         };
  93         ina226-u93 {
  94                 compatible = "iio-hwmon";
  95                 io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>;
  96         };
  97         ina226-u88 {
  98                 compatible = "iio-hwmon";
  99                 io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>;
 100         };
 101         ina226-u15 {
 102                 compatible = "iio-hwmon";
 103                 io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>;
 104         };
 105         ina226-u92 {
 106                 compatible = "iio-hwmon";
 107                 io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>;
 108         };
 109         ina226-u79 {
 110                 compatible = "iio-hwmon";
 111                 io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
 112         };
 113         ina226-u81 {
 114                 compatible = "iio-hwmon";
 115                 io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>;
 116         };
 117         ina226-u80 {
 118                 compatible = "iio-hwmon";
 119                 io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>;
 120         };
 121         ina226-u84 {
 122                 compatible = "iio-hwmon";
 123                 io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>;
 124         };
 125         ina226-u16 {
 126                 compatible = "iio-hwmon";
 127                 io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>;
 128         };
 129         ina226-u65 {
 130                 compatible = "iio-hwmon";
 131                 io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
 132         };
 133         ina226-u74 {
 134                 compatible = "iio-hwmon";
 135                 io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>;
 136         };
 137         ina226-u75 {
 138                 compatible = "iio-hwmon";
 139                 io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
 140         };
 141
 142         /* 48MHz reference crystal */
 143         ref48: ref48M {
 144                 compatible = "fixed-clock";
 145                 #clock-cells = <0>;
 146                 clock-frequency = <48000000>;
 147         };
 148
 149         refhdmi: refhdmi {
 150                 compatible = "fixed-clock";
 151                 #clock-cells = <0>;
 152                 clock-frequency = <114285000>;
 153         };
 154
 155         dpcon {
 156                 compatible = "dp-connector";
 157                 label = "P11";
 158                 type = "full-size";
 159
 160                 port {
 161                         dpcon_in: endpoint {
 162                                 remote-endpoint = <&dpsub_dp_out>;
 163                         };
 164                 };
 165         };
 166 };
 167
 168 &can1 {
 169         status = "okay";
 170         pinctrl-names = "default";
 171         pinctrl-0 = <&pinctrl_can1_default>;
 172 };
 173
 174 &dcc {
 175         status = "okay";
 176 };
 177
 178 &fpd_dma_chan1 {
 179         status = "okay";
 180 };
 181
 182 &fpd_dma_chan2 {
 183         status = "okay";
 184 };
 185
 186 &fpd_dma_chan3 {
 187         status = "okay";
 188 };
 189
 190 &fpd_dma_chan4 {
 191         status = "okay";
 192 };
 193
 194 &fpd_dma_chan5 {
 195         status = "okay";
 196 };
 197
 198 &fpd_dma_chan6 {
 199         status = "okay";
 200 };
 201
 202 &fpd_dma_chan7 {
 203         status = "okay";
 204 };
 205
 206 &fpd_dma_chan8 {
 207         status = "okay";
 208 };
 209
 210 &gem3 {
 211         status = "okay";
 212         phy-handle = <&phy0>;
 213         phy-mode = "rgmii-id";
 214         pinctrl-names = "default";
 215         pinctrl-0 = <&pinctrl_gem3_default>;
 216         mdio: mdio {
 217                 #address-cells = <1>;
 218                 #size-cells = <0>;
 219                 phy0: ethernet-phy@c {
 220                         #phy-cells = <1>;
 221                         reg = <0xc>;
 222                         compatible = "ethernet-phy-id2000.a231";
 223                         ti,rx-internal-delay = <0x8>;
 224                         ti,tx-internal-delay = <0xa>;
 225                         ti,fifo-depth = <0x1>;
 226                         ti,dp83867-rxctrl-strap-quirk;
 227                         reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>;
 228                 };
 229         };
 230 };
 231
 232 &gpio {
 233         status = "okay";
 234         pinctrl-names = "default";
 235         pinctrl-0 = <&pinctrl_gpio_default>;
 236 };
 237
 238 &gpu {
 239         status = "okay";
 240 };
 241
 242 &i2c0 {
 243         status = "okay";
 244         clock-frequency = <400000>;
 245         pinctrl-names = "default", "gpio";
 246         pinctrl-0 = <&pinctrl_i2c0_default>;
 247         pinctrl-1 = <&pinctrl_i2c0_gpio>;
 248         scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 249         sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 250
 251         tca6416_u97: gpio@20 {
 252                 compatible = "ti,tca6416";
 253                 reg = <0x20>;
 254                 gpio-controller; /* interrupt not connected */
 255                 #gpio-cells = <2>;
 256                 /*
 257                  * IRQ not connected
 258                  * Lines:
 259                  * 0 - SFP_SI5328_INT_ALM
 260                  * 1 - HDMI_SI5328_INT_ALM
 261                  * 5 - IIC_MUX_RESET_B
 262                  * 6 - GEM3_EXP_RESET_B
 263                  * 10 - FMC_HPC0_PRSNT_M2C_B
 264                  * 11 - FMC_HPC1_PRSNT_M2C_B
 265                  * 2-4, 7, 12-17 - not connected
 266                  */
 267         };
 268
 269         tca6416_u61: gpio@21 {
 270                 compatible = "ti,tca6416";
 271                 reg = <0x21>;
 272                 gpio-controller;
 273                 #gpio-cells = <2>;
 274                 /*
 275                  * IRQ not connected
 276                  * Lines:
 277                  * 0 - VCCPSPLL_EN
 278                  * 1 - MGTRAVCC_EN
 279                  * 2 - MGTRAVTT_EN
 280                  * 3 - VCCPSDDRPLL_EN
 281                  * 4 - MIO26_PMU_INPUT_LS
 282                  * 5 - PL_PMBUS_ALERT
 283                  * 6 - PS_PMBUS_ALERT
 284                  * 7 - MAXIM_PMBUS_ALERT
 285                  * 10 - PL_DDR4_VTERM_EN
 286                  * 11 - PL_DDR4_VPP_2V5_EN
 287                  * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
 288                  * 13 - PS_DIMM_SUSPEND_EN
 289                  * 14 - PS_DDR4_VTERM_EN
 290                  * 15 - PS_DDR4_VPP_2V5_EN
 291                  * 16 - 17 - not connected
 292                  */
 293         };
 294
 295         i2c-mux@75 { /* u60 */
 296                 compatible = "nxp,pca9544";
 297                 #address-cells = <1>;
 298                 #size-cells = <0>;
 299                 reg = <0x75>;
 300                 i2c@0 {
 301                         #address-cells = <1>;
 302                         #size-cells = <0>;
 303                         reg = <0>;
 304                         /* PS_PMBUS */
 305                         u76: ina226@40 { /* u76 */
 306                                 compatible = "ti,ina226";
 307                                 #io-channel-cells = <1>;
 308                                 label = "ina226-u76";
 309                                 reg = <0x40>;
 310                                 shunt-resistor = <5000>;
 311                         };
 312                         u77: ina226@41 { /* u77 */
 313                                 compatible = "ti,ina226";
 314                                 #io-channel-cells = <1>;
 315                                 label = "ina226-u77";
 316                                 reg = <0x41>;
 317                                 shunt-resistor = <5000>;
 318                         };
 319                         u78: ina226@42 { /* u78 */
 320                                 compatible = "ti,ina226";
 321                                 #io-channel-cells = <1>;
 322                                 label = "ina226-u78";
 323                                 reg = <0x42>;
 324                                 shunt-resistor = <5000>;
 325                         };
 326                         u87: ina226@43 { /* u87 */
 327                                 compatible = "ti,ina226";
 328                                 #io-channel-cells = <1>;
 329                                 label = "ina226-u87";
 330                                 reg = <0x43>;
 331                                 shunt-resistor = <5000>;
 332                         };
 333                         u85: ina226@44 { /* u85 */
 334                                 compatible = "ti,ina226";
 335                                 #io-channel-cells = <1>;
 336                                 label = "ina226-u85";
 337                                 reg = <0x44>;
 338                                 shunt-resistor = <5000>;
 339                         };
 340                         u86: ina226@45 { /* u86 */
 341                                 compatible = "ti,ina226";
 342                                 #io-channel-cells = <1>;
 343                                 label = "ina226-u86";
 344                                 reg = <0x45>;
 345                                 shunt-resistor = <5000>;
 346                         };
 347                         u93: ina226@46 { /* u93 */
 348                                 compatible = "ti,ina226";
 349                                 #io-channel-cells = <1>;
 350                                 label = "ina226-u93";
 351                                 reg = <0x46>;
 352                                 shunt-resistor = <5000>;
 353                         };
 354                         u88: ina226@47 { /* u88 */
 355                                 compatible = "ti,ina226";
 356                                 #io-channel-cells = <1>;
 357                                 label = "ina226-u88";
 358                                 reg = <0x47>;
 359                                 shunt-resistor = <5000>;
 360                         };
 361                         u15: ina226@4a { /* u15 */
 362                                 compatible = "ti,ina226";
 363                                 #io-channel-cells = <1>;
 364                                 label = "ina226-u15";
 365                                 reg = <0x4a>;
 366                                 shunt-resistor = <5000>;
 367                         };
 368                         u92: ina226@4b { /* u92 */
 369                                 compatible = "ti,ina226";
 370                                 #io-channel-cells = <1>;
 371                                 label = "ina226-u92";
 372                                 reg = <0x4b>;
 373                                 shunt-resistor = <5000>;
 374                         };
 375                 };
 376                 i2c@1 {
 377                         #address-cells = <1>;
 378                         #size-cells = <0>;
 379                         reg = <1>;
 380                         /* PL_PMBUS */
 381                         u79: ina226@40 { /* u79 */
 382                                 compatible = "ti,ina226";
 383                                 #io-channel-cells = <1>;
 384                                 label = "ina226-u79";
 385                                 reg = <0x40>;
 386                                 shunt-resistor = <2000>;
 387                         };
 388                         u81: ina226@41 { /* u81 */
 389                                 compatible = "ti,ina226";
 390                                 #io-channel-cells = <1>;
 391                                 label = "ina226-u81";
 392                                 reg = <0x41>;
 393                                 shunt-resistor = <5000>;
 394                         };
 395                         u80: ina226@42 { /* u80 */
 396                                 compatible = "ti,ina226";
 397                                 #io-channel-cells = <1>;
 398                                 label = "ina226-u80";
 399                                 reg = <0x42>;
 400                                 shunt-resistor = <5000>;
 401                         };
 402                         u84: ina226@43 { /* u84 */
 403                                 compatible = "ti,ina226";
 404                                 #io-channel-cells = <1>;
 405                                 label = "ina226-u84";
 406                                 reg = <0x43>;
 407                                 shunt-resistor = <5000>;
 408                         };
 409                         u16: ina226@44 { /* u16 */
 410                                 compatible = "ti,ina226";
 411                                 #io-channel-cells = <1>;
 412                                 label = "ina226-u16";
 413                                 reg = <0x44>;
 414                                 shunt-resistor = <5000>;
 415                         };
 416                         u65: ina226@45 { /* u65 */
 417                                 compatible = "ti,ina226";
 418                                 #io-channel-cells = <1>;
 419                                 label = "ina226-u65";
 420                                 reg = <0x45>;
 421                                 shunt-resistor = <5000>;
 422                         };
 423                         u74: ina226@46 { /* u74 */
 424                                 compatible = "ti,ina226";
 425                                 #io-channel-cells = <1>;
 426                                 label = "ina226-u74";
 427                                 reg = <0x46>;
 428                                 shunt-resistor = <5000>;
 429                         };
 430                         u75: ina226@47 { /* u75 */
 431                                 compatible = "ti,ina226";
 432                                 #io-channel-cells = <1>;
 433                                 label = "ina226-u75";
 434                                 reg = <0x47>;
 435                                 shunt-resistor = <5000>;
 436                         };
 437                 };
 438                 i2c@2 {
 439                         #address-cells = <1>;
 440                         #size-cells = <0>;
 441                         reg = <2>;
 442                         /* MAXIM_PMBUS - 00 */
 443                         max15301@a { /* u46 */
 444                                 compatible = "maxim,max15301";
 445                                 reg = <0xa>;
 446                         };
 447                         max15303@b { /* u4 */
 448                                 compatible = "maxim,max15303";
 449                                 reg = <0xb>;
 450                         };
 451                         max15303@10 { /* u13 */
 452                                 compatible = "maxim,max15303";
 453                                 reg = <0x10>;
 454                         };
 455                         max15301@13 { /* u47 */
 456                                 compatible = "maxim,max15301";
 457                                 reg = <0x13>;
 458                         };
 459                         max15303@14 { /* u7 */
 460                                 compatible = "maxim,max15303";
 461                                 reg = <0x14>;
 462                         };
 463                         max15303@15 { /* u6 */
 464                                 compatible = "maxim,max15303";
 465                                 reg = <0x15>;
 466                         };
 467                         max15303@16 { /* u10 */
 468                                 compatible = "maxim,max15303";
 469                                 reg = <0x16>;
 470                         };
 471                         max15303@17 { /* u9 */
 472                                 compatible = "maxim,max15303";
 473                                 reg = <0x17>;
 474                         };
 475                         max15301@18 { /* u63 */
 476                                 compatible = "maxim,max15301";
 477                                 reg = <0x18>;
 478                         };
 479                         max15303@1a { /* u49 */
 480                                 compatible = "maxim,max15303";
 481                                 reg = <0x1a>;
 482                         };
 483                         max15303@1b { /* u8 */
 484                                 compatible = "maxim,max15303";
 485                                 reg = <0x1b>;
 486                         };
 487                         max15303@1d { /* u18 */
 488                                 compatible = "maxim,max15303";
 489                                 reg = <0x1d>;
 490                         };
 491
 492                         max20751@72 { /* u95 */
 493                                 compatible = "maxim,max20751";
 494                                 reg = <0x72>;
 495                         };
 496                         max20751@73 { /* u96 */
 497                                 compatible = "maxim,max20751";
 498                                 reg = <0x73>;
 499                         };
 500                 };
 501                 /* Bus 3 is not connected */
 502         };
 503 };
 504
 505 &i2c1 {
 506         status = "okay";
 507         clock-frequency = <400000>;
 508         pinctrl-names = "default", "gpio";
 509         pinctrl-0 = <&pinctrl_i2c1_default>;
 510         pinctrl-1 = <&pinctrl_i2c1_gpio>;
 511         scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 512         sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 513
 514         /* PL i2c via PCA9306 - u45 */
 515         i2c-mux@74 { /* u34 */
 516                 compatible = "nxp,pca9548";
 517                 #address-cells = <1>;
 518                 #size-cells = <0>;
 519                 reg = <0x74>;
 520                 i2c@0 {
 521                         #address-cells = <1>;
 522                         #size-cells = <0>;
 523                         reg = <0>;
 524                         /*
 525                          * IIC_EEPROM 1kB memory which uses 256B blocks
 526                          * where every block has different address.
 527                          *    0 - 256B address 0x54
 528                          * 256B - 512B address 0x55
 529                          * 512B - 768B address 0x56
 530                          * 768B - 1024B address 0x57
 531                          */
 532                         eeprom: eeprom@54 { /* u23 */
 533                                 compatible = "atmel,24c08";
 534                                 reg = <0x54>;
 535                         };
 536                 };
 537                 i2c@1 {
 538                         #address-cells = <1>;
 539                         #size-cells = <0>;
 540                         reg = <1>;
 541                         si5341: clock-generator@36 { /* SI5341 - u69 */
 542                                 compatible = "silabs,si5341";
 543                                 reg = <0x36>;
 544                                 #clock-cells = <2>;
 545                                 #address-cells = <1>;
 546                                 #size-cells = <0>;
 547                                 clocks = <&ref48>;
 548                                 clock-names = "xtal";
 549                                 clock-output-names = "si5341";
 550
 551                                 si5341_0: out@0 {
 552                                         /* refclk0 for PS-GT, used for DP */
 553                                         reg = <0>;
 554                                         always-on;
 555                                 };
 556                                 si5341_2: out@2 {
 557                                         /* refclk2 for PS-GT, used for USB3 */
 558                                         reg = <2>;
 559                                         always-on;
 560                                 };
 561                                 si5341_3: out@3 {
 562                                         /* refclk3 for PS-GT, used for SATA */
 563                                         reg = <3>;
 564                                         always-on;
 565                                 };
 566                                 si5341_6: out@6 {
 567                                         /* refclk6 PL CLK125 */
 568                                         reg = <6>;
 569                                         always-on;
 570                                 };
 571                                 si5341_7: out@7 {
 572                                         /* refclk7 PL CLK74 */
 573                                         reg = <7>;
 574                                         always-on;
 575                                 };
 576                                 si5341_9: out@9 {
 577                                         /* refclk9 used for PS_REF_CLK 33.3 MHz */
 578                                         reg = <9>;
 579                                         always-on;
 580                                 };
 581                         };
 582
 583                 };
 584                 i2c@2 {
 585                         #address-cells = <1>;
 586                         #size-cells = <0>;
 587                         reg = <2>;
 588                         si570_1: clock-generator@5d { /* USER SI570 - u42 */
 589                                 #clock-cells = <0>;
 590                                 compatible = "silabs,si570";
 591                                 reg = <0x5d>;
 592                                 temperature-stability = <50>;
 593                                 factory-fout = <300000000>;
 594                                 clock-frequency = <300000000>;
 595                                 clock-output-names = "si570_user";
 596                         };
 597                 };
 598                 i2c@3 {
 599                         #address-cells = <1>;
 600                         #size-cells = <0>;
 601                         reg = <3>;
 602                         si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */
 603                                 #clock-cells = <0>;
 604                                 compatible = "silabs,si570";
 605                                 reg = <0x5d>;
 606                                 temperature-stability = <50>; /* copy from zc702 */
 607                                 factory-fout = <156250000>;
 608                                 clock-frequency = <148500000>;
 609                                 clock-output-names = "si570_mgt";
 610                         };
 611                 };
 612                 i2c@4 {
 613                         #address-cells = <1>;
 614                         #size-cells = <0>;
 615                         reg = <4>;
 616                         /* SI5328 - u20 */
 617                 };
 618                 i2c@5 {
 619                         #address-cells = <1>;
 620                         #size-cells = <0>;
 621                         reg = <5>; /* FAN controller */
 622                         temp@4c {/* lm96163 - u128 */
 623                                 compatible = "national,lm96163";
 624                                 reg = <0x4c>;
 625                         };
 626                 };
 627                 /* 6 - 7 unconnected */
 628         };
 629
 630         i2c-mux@75 {
 631                 compatible = "nxp,pca9548"; /* u135 */
 632                 #address-cells = <1>;
 633                 #size-cells = <0>;
 634                 reg = <0x75>;
 635
 636                 i2c@0 {
 637                         #address-cells = <1>;
 638                         #size-cells = <0>;
 639                         reg = <0>;
 640                         /* HPC0_IIC */
 641                 };
 642                 i2c@1 {
 643                         #address-cells = <1>;
 644                         #size-cells = <0>;
 645                         reg = <1>;
 646                         /* HPC1_IIC */
 647                 };
 648                 i2c@2 {
 649                         #address-cells = <1>;
 650                         #size-cells = <0>;
 651                         reg = <2>;
 652                         /* SYSMON */
 653                 };
 654                 i2c@3 {
 655                         #address-cells = <1>;
 656                         #size-cells = <0>;
 657                         reg = <3>;
 658                         /* DDR4 SODIMM */
 659                 };
 660                 i2c@4 {
 661                         #address-cells = <1>;
 662                         #size-cells = <0>;
 663                         reg = <4>;
 664                         /* SEP 3 */
 665                 };
 666                 i2c@5 {
 667                         #address-cells = <1>;
 668                         #size-cells = <0>;
 669                         reg = <5>;
 670                         /* SEP 2 */
 671                 };
 672                 i2c@6 {
 673                         #address-cells = <1>;
 674                         #size-cells = <0>;
 675                         reg = <6>;
 676                         /* SEP 1 */
 677                 };
 678                 i2c@7 {
 679                         #address-cells = <1>;
 680                         #size-cells = <0>;
 681                         reg = <7>;
 682                         /* SEP 0 */
 683                 };
 684         };
 685 };
 686
 687 &pinctrl0 {
 688         status = "okay";
 689         pinctrl_i2c0_default: i2c0-default {
 690                 mux {
 691                         groups = "i2c0_3_grp";
 692                         function = "i2c0";
 693                 };
 694
 695                 conf {
 696                         groups = "i2c0_3_grp";
 697                         bias-pull-up;
 698                         slew-rate = <SLEW_RATE_SLOW>;
 699                         power-source = <IO_STANDARD_LVCMOS18>;
 700                 };
 701         };
 702
 703         pinctrl_i2c0_gpio: i2c0-gpio {
 704                 mux {
 705                         groups = "gpio0_14_grp", "gpio0_15_grp";
 706                         function = "gpio0";
 707                 };
 708
 709                 conf {
 710                         groups = "gpio0_14_grp", "gpio0_15_grp";
 711                         slew-rate = <SLEW_RATE_SLOW>;
 712                         power-source = <IO_STANDARD_LVCMOS18>;
 713                 };
 714         };
 715
 716         pinctrl_i2c1_default: i2c1-default {
 717                 mux {
 718                         groups = "i2c1_4_grp";
 719                         function = "i2c1";
 720                 };
 721
 722                 conf {
 723                         groups = "i2c1_4_grp";
 724                         bias-pull-up;
 725                         slew-rate = <SLEW_RATE_SLOW>;
 726                         power-source = <IO_STANDARD_LVCMOS18>;
 727                 };
 728         };
 729
 730         pinctrl_i2c1_gpio: i2c1-gpio {
 731                 mux {
 732                         groups = "gpio0_16_grp", "gpio0_17_grp";
 733                         function = "gpio0";
 734                 };
 735
 736                 conf {
 737                         groups = "gpio0_16_grp", "gpio0_17_grp";
 738                         slew-rate = <SLEW_RATE_SLOW>;
 739                         power-source = <IO_STANDARD_LVCMOS18>;
 740                 };
 741         };
 742
 743         pinctrl_uart0_default: uart0-default {
 744                 mux {
 745                         groups = "uart0_4_grp";
 746                         function = "uart0";
 747                 };
 748
 749                 conf {
 750                         groups = "uart0_4_grp";
 751                         slew-rate = <SLEW_RATE_SLOW>;
 752                         power-source = <IO_STANDARD_LVCMOS18>;
 753                 };
 754
 755                 conf-rx {
 756                         pins = "MIO18";
 757                         bias-high-impedance;
 758                 };
 759
 760                 conf-tx {
 761                         pins = "MIO19";
 762                         bias-disable;
 763                 };
 764         };
 765
 766         pinctrl_uart1_default: uart1-default {
 767                 mux {
 768                         groups = "uart1_5_grp";
 769                         function = "uart1";
 770                 };
 771
 772                 conf {
 773                         groups = "uart1_5_grp";
 774                         slew-rate = <SLEW_RATE_SLOW>;
 775                         power-source = <IO_STANDARD_LVCMOS18>;
 776                 };
 777
 778                 conf-rx {
 779                         pins = "MIO21";
 780                         bias-high-impedance;
 781                 };
 782
 783                 conf-tx {
 784                         pins = "MIO20";
 785                         bias-disable;
 786                 };
 787         };
 788
 789         pinctrl_usb0_default: usb0-default {
 790                 mux {
 791                         groups = "usb0_0_grp";
 792                         function = "usb0";
 793                 };
 794
 795                 conf {
 796                         groups = "usb0_0_grp";
 797                         power-source = <IO_STANDARD_LVCMOS18>;
 798                 };
 799
 800                 conf-rx {
 801                         pins = "MIO52", "MIO53", "MIO55";
 802                         bias-high-impedance;
 803                         drive-strength = <12>;
 804                         slew-rate = <SLEW_RATE_FAST>;
 805                 };
 806
 807                 conf-tx {
 808                         pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
 809                                "MIO60", "MIO61", "MIO62", "MIO63";
 810                         bias-disable;
 811                         drive-strength = <4>;
 812                         slew-rate = <SLEW_RATE_SLOW>;
 813                 };
 814         };
 815
 816         pinctrl_gem3_default: gem3-default {
 817                 mux {
 818                         function = "ethernet3";
 819                         groups = "ethernet3_0_grp";
 820                 };
 821
 822                 conf {
 823                         groups = "ethernet3_0_grp";
 824                         slew-rate = <SLEW_RATE_SLOW>;
 825                         power-source = <IO_STANDARD_LVCMOS18>;
 826                 };
 827
 828                 conf-rx {
 829                         pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
 830                                                                         "MIO75";
 831                         bias-high-impedance;
 832                         low-power-disable;
 833                 };
 834
 835                 conf-tx {
 836                         pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
 837                                                                         "MIO69";
 838                         bias-disable;
 839                         low-power-enable;
 840                 };
 841
 842                 mux-mdio {
 843                         function = "mdio3";
 844                         groups = "mdio3_0_grp";
 845                 };
 846
 847                 conf-mdio {
 848                         groups = "mdio3_0_grp";
 849                         slew-rate = <SLEW_RATE_SLOW>;
 850                         power-source = <IO_STANDARD_LVCMOS18>;
 851                         bias-disable;
 852                 };
 853         };
 854
 855         pinctrl_can1_default: can1-default {
 856                 mux {
 857                         function = "can1";
 858                         groups = "can1_6_grp";
 859                 };
 860
 861                 conf {
 862                         groups = "can1_6_grp";
 863                         slew-rate = <SLEW_RATE_SLOW>;
 864                         power-source = <IO_STANDARD_LVCMOS18>;
 865                 };
 866
 867                 conf-rx {
 868                         pins = "MIO25";
 869                         bias-high-impedance;
 870                 };
 871
 872                 conf-tx {
 873                         pins = "MIO24";
 874                         bias-disable;
 875                 };
 876         };
 877
 878         pinctrl_sdhci1_default: sdhci1-default {
 879                 mux {
 880                         groups = "sdio1_0_grp";
 881                         function = "sdio1";
 882                 };
 883
 884                 conf {
 885                         groups = "sdio1_0_grp";
 886                         slew-rate = <SLEW_RATE_SLOW>;
 887                         power-source = <IO_STANDARD_LVCMOS18>;
 888                         bias-disable;
 889                 };
 890
 891                 mux-cd {
 892                         groups = "sdio1_cd_0_grp";
 893                         function = "sdio1_cd";
 894                 };
 895
 896                 conf-cd {
 897                         groups = "sdio1_cd_0_grp";
 898                         bias-high-impedance;
 899                         bias-pull-up;
 900                         slew-rate = <SLEW_RATE_SLOW>;
 901                         power-source = <IO_STANDARD_LVCMOS18>;
 902                 };
 903
 904                 mux-wp {
 905                         groups = "sdio1_wp_0_grp";
 906                         function = "sdio1_wp";
 907                 };
 908
 909                 conf-wp {
 910                         groups = "sdio1_wp_0_grp";
 911                         bias-high-impedance;
 912                         bias-pull-up;
 913                         slew-rate = <SLEW_RATE_SLOW>;
 914                         power-source = <IO_STANDARD_LVCMOS18>;
 915                 };
 916         };
 917
 918         pinctrl_gpio_default: gpio-default {
 919                 mux {
 920                         function = "gpio0";
 921                         groups = "gpio0_22_grp", "gpio0_23_grp";
 922                 };
 923
 924                 conf {
 925                         groups = "gpio0_22_grp", "gpio0_23_grp";
 926                         slew-rate = <SLEW_RATE_SLOW>;
 927                         power-source = <IO_STANDARD_LVCMOS18>;
 928                 };
 929
 930                 mux-msp {
 931                         function = "gpio0";
 932                         groups = "gpio0_13_grp", "gpio0_38_grp";
 933                 };
 934
 935                 conf-msp {
 936                         groups = "gpio0_13_grp", "gpio0_38_grp";
 937                         slew-rate = <SLEW_RATE_SLOW>;
 938                         power-source = <IO_STANDARD_LVCMOS18>;
 939                 };
 940
 941                 conf-pull-up {
 942                         pins = "MIO22";
 943                         bias-pull-up;
 944                 };
 945
 946                 conf-pull-none {
 947                         pins = "MIO13", "MIO23", "MIO38";
 948                         bias-disable;
 949                 };
 950         };
 951 };
 952
 953 &psgtr {
 954         status = "okay";
 955         /* nc, sata, usb3, dp */
 956         clocks = <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>;
 957         clock-names = "ref1", "ref2", "ref3";
 958 };
 959
 960 &qspi {
 961         status = "okay";
 962         flash@0 {
 963                 compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */
 964                 #address-cells = <1>;
 965                 #size-cells = <1>;
 966                 reg = <0x0>;
 967                 spi-tx-bus-width = <4>;
 968                 spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 969                 spi-max-frequency = <108000000>; /* Based on DC1 spec */
 970         };
 971 };
 972
 973 &rtc {
 974         status = "okay";
 975 };
 976
 977 &sata {
 978         status = "okay";
 979         /* SATA OOB timing settings */
 980         ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
 981         ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
 982         ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
 983         ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
 984         ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
 985         ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
 986         ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
 987         ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
 988         phy-names = "sata-phy";
 989         phys = <&psgtr 3 PHY_TYPE_SATA 1 1>;
 990 };
 991
 992 /* SD1 with level shifter */
 993 &sdhci1 {
 994         status = "okay";
 995         /*
 996          * This property should be removed for supporting UHS mode
 997          */
 998         no-1-8-v;
 999         pinctrl-names = "default";
1000         pinctrl-0 = <&pinctrl_sdhci1_default>;
1001         xlnx,mio-bank = <1>;
1002 };
1003
1004 &uart0 {
1005         status = "okay";
1006         pinctrl-names = "default";
1007         pinctrl-0 = <&pinctrl_uart0_default>;
1008 };
1009
1010 &uart1 {
1011         status = "okay";
1012         pinctrl-names = "default";
1013         pinctrl-0 = <&pinctrl_uart1_default>;
1014 };
1015
1016 /* ULPI SMSC USB3320 */
1017 &usb0 {
1018         status = "okay";
1019         pinctrl-names = "default";
1020         pinctrl-0 = <&pinctrl_usb0_default>;
1021         phy-names = "usb3-phy";
1022         phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
1023 };
1024
1025 &dwc3_0 {
1026         status = "okay";
1027         dr_mode = "host";
1028         snps,usb3_lpm_capable;
1029         maximum-speed = "super-speed";
1030 };
1031
1032 &watchdog0 {
1033         status = "okay";
1034 };
1035
1036 &zynqmp_dpdma {
1037         status = "okay";
1038 };
1039
1040 &zynqmp_dpsub {
1041         status = "okay";
1042         phy-names = "dp-phy0", "dp-phy1";
1043         phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
1044                <&psgtr 0 PHY_TYPE_DP 1 3>;
1045
1046         ports {
1047                 port@5 {
1048                         dpsub_dp_out: endpoint {
1049                                 remote-endpoint = <&dpcon_in>;
1050                         };
1051                 };
1052         };
1053 };