1 // SPDX-License-Identifier: GPL-2.0+
3 * dts file for Xilinx ZynqMP zc1751-xm017-dc3
5 * (C) Copyright 2016 - 2021, Xilinx, Inc.
7 * Michal Simek <michal.simek@amd.com>
12 #include "zynqmp.dtsi"
13 #include "zynqmp-clk-ccf.dtsi"
14 #include <dt-bindings/phy/phy.h>
17 model = "ZynqMP zc1751-xm017-dc3 RevA";
18 compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
33 bootargs = "earlycon";
34 stdout-path = "serial0:115200n8";
38 device_type = "memory";
39 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
42 clock_si5338_2: clk26 {
43 compatible = "fixed-clock";
45 clock-frequency = <26000000>;
48 clock_si5338_3: clk125 {
49 compatible = "fixed-clock";
51 clock-frequency = <125000000>;
90 phy-mode = "rgmii-id";
91 phy0: ethernet-phy@0 { /* VSC8211 */
100 /* just eeprom here */
103 clock-frequency = <400000>;
105 tca6416_u26: gpio@20 {
106 compatible = "ti,tca6416";
110 /* IRQ not connected */
114 compatible = "dallas,ds1339";
119 /* eeprom24c02 and SE98A temp chip pca9306 */
122 clock-frequency = <400000>;
125 /* MT29F64G08AECDBJ4-6 */
135 clocks = <&clock_si5338_2>, <&clock_si5338_3>;
136 clock-names = "ref2", "ref3";
145 /* SATA phy OOB timing settings */
146 ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
147 ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
148 ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
149 ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
150 ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
151 ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
152 ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
153 ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
154 phy-names = "sata-phy";
155 phys = <&psgtr 2 PHY_TYPE_SATA 0 3>;
158 &sdhci1 { /* emmc with some settings */
174 phy-names = "usb3-phy";
175 phys = <&psgtr 0 PHY_TYPE_USB3 0 2>;
181 snps,usb3_lpm_capable;
182 maximum-speed = "super-speed";
185 /* ULPI SMSC USB3320 */
188 phy-names = "usb3-phy";
189 phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
195 snps,usb3_lpm_capable;
196 maximum-speed = "super-speed";