1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
8 #include "k3-j7200.dtsi"
12 device_type = "memory";
14 reg = <0x00 0x80000000 0x00 0x80000000>,
15 <0x08 0x80000000 0x00 0x80000000>;
18 reserved_memory: reserved-memory {
23 secure_ddr: optee@9e800000 {
24 reg = <0x00 0x9e800000 0x00 0x01800000>;
29 mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
30 compatible = "shared-dma-pool";
31 reg = <0x00 0xa0000000 0x00 0x100000>;
35 mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
36 compatible = "shared-dma-pool";
37 reg = <0x00 0xa0100000 0x00 0xf00000>;
41 mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
42 compatible = "shared-dma-pool";
43 reg = <0x00 0xa1000000 0x00 0x100000>;
47 mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
48 compatible = "shared-dma-pool";
49 reg = <0x00 0xa1100000 0x00 0xf00000>;
53 main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
54 compatible = "shared-dma-pool";
55 reg = <0x00 0xa2000000 0x00 0x100000>;
59 main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
60 compatible = "shared-dma-pool";
61 reg = <0x00 0xa2100000 0x00 0xf00000>;
65 main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
66 compatible = "shared-dma-pool";
67 reg = <0x00 0xa3000000 0x00 0x100000>;
71 main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
72 compatible = "shared-dma-pool";
73 reg = <0x00 0xa3100000 0x00 0xf00000>;
77 rtos_ipc_memory_region: ipc-memories@a4000000 {
78 reg = <0x00 0xa4000000 0x00 0x00800000>;
86 mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-default-pins {
87 pinctrl-single,pins = <
88 J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (B6) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */
89 J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C8) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */
90 J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* (D6) MCU_OSPI0_CSn0.MCU_HYPERBUS0_CSn0 */
91 J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* (D7) MCU_OSPI0_CSn1.MCU_HYPERBUS0_RESETn */
92 J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* (B7) MCU_OSPI0_DQS.MCU_HYPERBUS0_RWDS */
93 J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* (D8) MCU_OSPI0_D0.MCU_HYPERBUS0_DQ0 */
94 J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* (C7) MCU_OSPI0_D1.MCU_HYPERBUS0_DQ1 */
95 J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* (C5) MCU_OSPI0_D2.MCU_HYPERBUS0_DQ2 */
96 J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* (A5) MCU_OSPI0_D3.MCU_HYPERBUS0_DQ3 */
97 J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* (A6) MCU_OSPI0_D4.MCU_HYPERBUS0_DQ4 */
98 J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* (B8) MCU_OSPI0_D5.MCU_HYPERBUS0_DQ5 */
99 J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* (A8) MCU_OSPI0_D6.MCU_HYPERBUS0_DQ6 */
100 J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (A7) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */
104 mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
105 pinctrl-single,pins = <
106 J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
107 J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */
108 J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* MCU_OSPI0_D0 */
109 J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* MCU_OSPI0_D1 */
110 J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* MCU_OSPI0_D2 */
111 J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* MCU_OSPI0_D3 */
112 J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_OSPI0_D4 */
113 J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_OSPI0_D5 */
114 J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_OSPI0_D6 */
115 J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_OSPI0_D7 */
116 J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* MCU_OSPI0_DQS */
122 wkup_i2c0_pins_default: wkup-i2c0-default-pins {
123 pinctrl-single,pins = <
124 J721E_WKUP_IOPAD(0x98, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */
125 J721E_WKUP_IOPAD(0x9c, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */
131 main_i2c0_pins_default: main-i2c0-default-pins {
132 pinctrl-single,pins = <
133 J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
134 J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
140 /* OSPI and HBMC are muxed inside FSS, Bootloader will enable
141 * appropriate node based on board detection
144 pinctrl-names = "default";
145 pinctrl-0 = <&mcu_fss0_hpb0_pins_default>;
146 ranges = <0x00 0x00 0x05 0x00000000 0x4000000>, /* 64MB Flash on CS0 */
147 <0x01 0x00 0x05 0x04000000 0x800000>; /* 8MB RAM on CS1 */
150 compatible = "cypress,hyperflash", "cfi-flash";
151 reg = <0x00 0x00 0x4000000>;
154 compatible = "fixed-partitions";
155 #address-cells = <1>;
159 label = "hbmc.tiboot3";
160 reg = <0x0 0x100000>;
164 label = "hbmc.tispl";
165 reg = <0x100000 0x200000>;
169 label = "hbmc.u-boot";
170 reg = <0x300000 0x400000>;
175 reg = <0x700000 0x40000>;
179 label = "hbmc.rootfs";
180 reg = <0x800000 0x3800000>;
190 mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
191 ti,mbox-rx = <0 0 0>;
192 ti,mbox-tx = <1 0 0>;
195 mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
196 ti,mbox-rx = <2 0 0>;
197 ti,mbox-tx = <3 0 0>;
205 mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
206 ti,mbox-rx = <0 0 0>;
207 ti,mbox-tx = <1 0 0>;
210 mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
211 ti,mbox-rx = <2 0 0>;
212 ti,mbox-tx = <3 0 0>;
217 mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
218 memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
219 <&mcu_r5fss0_core0_memory_region>;
223 mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
224 memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
225 <&mcu_r5fss0_core1_memory_region>;
229 mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
230 memory-region = <&main_r5fss0_core0_dma_memory_region>,
231 <&main_r5fss0_core0_memory_region>;
235 mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
236 memory-region = <&main_r5fss0_core1_dma_memory_region>,
237 <&main_r5fss0_core1_memory_region>;
241 pinctrl-names = "default";
242 pinctrl-0 = <&main_i2c0_pins_default>;
243 clock-frequency = <400000>;
246 compatible = "ti,tca6408";
250 gpio-line-names = "USB2.0_MUX_SEL", "CANUART_MUX1_SEL0",
251 "CANUART_MUX2_SEL0", "CANUART_MUX_SEL1",
252 "UART/LIN_MUX_SEL", "TRC_D17/AUDIO_REFCLK_SEL",
253 "GPIO_LIN_EN", "CAN_STB";
259 pinctrl-names = "default";
260 pinctrl-0 = <&wkup_i2c0_pins_default>;
261 clock-frequency = <400000>;
264 compatible = "atmel,24c256";
271 pinctrl-names = "default";
272 pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
275 compatible = "jedec,spi-nor";
277 spi-tx-bus-width = <8>;
278 spi-rx-bus-width = <8>;
279 spi-max-frequency = <25000000>;
280 cdns,tshsl-ns = <60>;
281 cdns,tsd2d-ns = <60>;
282 cdns,tchsh-ns = <60>;
283 cdns,tslch-ns = <60>;
284 cdns,read-delay = <4>;
287 compatible = "fixed-partitions";
288 #address-cells = <1>;
292 label = "ospi.tiboot3";
293 reg = <0x0 0x100000>;
297 label = "ospi.tispl";
298 reg = <0x100000 0x200000>;
302 label = "ospi.u-boot";
303 reg = <0x300000 0x400000>;
308 reg = <0x700000 0x40000>;
312 label = "ospi.env.backup";
313 reg = <0x740000 0x40000>;
317 label = "ospi.rootfs";
318 reg = <0x800000 0x37c0000>;
322 label = "ospi.phypattern";
323 reg = <0x3fc0000 0x40000>;