arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "k3-j7200.dtsi"
   9
  10 / {
  11         memory@80000000 {
  12                 device_type = "memory";
  13                 /* 4G RAM */
  14                 reg = <0x00 0x80000000 0x00 0x80000000>,
  15                       <0x08 0x80000000 0x00 0x80000000>;
  16         };
  17
  18         reserved_memory: reserved-memory {
  19                 #address-cells = <2>;
  20                 #size-cells = <2>;
  21                 ranges;
  22
  23                 secure_ddr: optee@9e800000 {
  24                         reg = <0x00 0x9e800000 0x00 0x01800000>;
  25                         alignment = <0x1000>;
  26                         no-map;
  27                 };
  28
  29                 mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
  30                         compatible = "shared-dma-pool";
  31                         reg = <0x00 0xa0000000 0x00 0x100000>;
  32                         no-map;
  33                 };
  34
  35                 mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
  36                         compatible = "shared-dma-pool";
  37                         reg = <0x00 0xa0100000 0x00 0xf00000>;
  38                         no-map;
  39                 };
  40
  41                 mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
  42                         compatible = "shared-dma-pool";
  43                         reg = <0x00 0xa1000000 0x00 0x100000>;
  44                         no-map;
  45                 };
  46
  47                 mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
  48                         compatible = "shared-dma-pool";
  49                         reg = <0x00 0xa1100000 0x00 0xf00000>;
  50                         no-map;
  51                 };
  52
  53                 main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
  54                         compatible = "shared-dma-pool";
  55                         reg = <0x00 0xa2000000 0x00 0x100000>;
  56                         no-map;
  57                 };
  58
  59                 main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
  60                         compatible = "shared-dma-pool";
  61                         reg = <0x00 0xa2100000 0x00 0xf00000>;
  62                         no-map;
  63                 };
  64
  65                 main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
  66                         compatible = "shared-dma-pool";
  67                         reg = <0x00 0xa3000000 0x00 0x100000>;
  68                         no-map;
  69                 };
  70
  71                 main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
  72                         compatible = "shared-dma-pool";
  73                         reg = <0x00 0xa3100000 0x00 0xf00000>;
  74                         no-map;
  75                 };
  76
  77                 rtos_ipc_memory_region: ipc-memories@a4000000 {
  78                         reg = <0x00 0xa4000000 0x00 0x00800000>;
  79                         alignment = <0x1000>;
  80                         no-map;
  81                 };
  82         };
  83 };
  84
  85 &wkup_pmx0 {
  86         mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-default-pins {
  87                 pinctrl-single,pins = <
  88                         J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (B6) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */
  89                         J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C8) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */
  90                         J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* (D6) MCU_OSPI0_CSn0.MCU_HYPERBUS0_CSn0 */
  91                         J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* (D7) MCU_OSPI0_CSn1.MCU_HYPERBUS0_RESETn */
  92                         J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* (B7) MCU_OSPI0_DQS.MCU_HYPERBUS0_RWDS */
  93                         J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* (D8) MCU_OSPI0_D0.MCU_HYPERBUS0_DQ0 */
  94                         J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* (C7) MCU_OSPI0_D1.MCU_HYPERBUS0_DQ1 */
  95                         J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* (C5) MCU_OSPI0_D2.MCU_HYPERBUS0_DQ2 */
  96                         J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* (A5) MCU_OSPI0_D3.MCU_HYPERBUS0_DQ3 */
  97                         J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* (A6) MCU_OSPI0_D4.MCU_HYPERBUS0_DQ4 */
  98                         J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* (B8) MCU_OSPI0_D5.MCU_HYPERBUS0_DQ5 */
  99                         J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* (A8) MCU_OSPI0_D6.MCU_HYPERBUS0_DQ6 */
 100                         J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (A7) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */
 101                 >;
 102         };
 103
 104         mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
 105                 pinctrl-single,pins = <
 106                         J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
 107                         J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */
 108                         J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0)  /* MCU_OSPI0_D0 */
 109                         J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0)  /* MCU_OSPI0_D1 */
 110                         J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0)  /* MCU_OSPI0_D2 */
 111                         J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0)  /* MCU_OSPI0_D3 */
 112                         J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0)  /* MCU_OSPI0_D4 */
 113                         J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0)  /* MCU_OSPI0_D5 */
 114                         J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0)  /* MCU_OSPI0_D6 */
 115                         J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* MCU_OSPI0_D7 */
 116                         J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0)  /* MCU_OSPI0_DQS */
 117                 >;
 118         };
 119 };
 120
 121 &wkup_pmx2 {
 122         wkup_i2c0_pins_default: wkup-i2c0-default-pins {
 123                         pinctrl-single,pins = <
 124                         J721E_WKUP_IOPAD(0x98, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */
 125                         J721E_WKUP_IOPAD(0x9c, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */
 126                 >;
 127         };
 128 };
 129
 130 &main_pmx0 {
 131         main_i2c0_pins_default: main-i2c0-default-pins {
 132                 pinctrl-single,pins = <
 133                         J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
 134                         J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
 135                 >;
 136         };
 137 };
 138
 139 &hbmc {
 140         /* OSPI and HBMC are muxed inside FSS, Bootloader will enable
 141          * appropriate node based on board detection
 142          */
 143         status = "disabled";
 144         pinctrl-names = "default";
 145         pinctrl-0 = <&mcu_fss0_hpb0_pins_default>;
 146         ranges = <0x00 0x00 0x05 0x00000000 0x4000000>, /* 64MB Flash on CS0 */
 147                  <0x01 0x00 0x05 0x04000000 0x800000>; /* 8MB RAM on CS1 */
 148
 149         flash@0,0 {
 150                 compatible = "cypress,hyperflash", "cfi-flash";
 151                 reg = <0x00 0x00 0x4000000>;
 152
 153                 partitions {
 154                         compatible = "fixed-partitions";
 155                         #address-cells = <1>;
 156                         #size-cells = <1>;
 157
 158                         partition@0 {
 159                                 label = "hbmc.tiboot3";
 160                                 reg = <0x0 0x100000>;
 161                         };
 162
 163                         partition@100000 {
 164                                 label = "hbmc.tispl";
 165                                 reg = <0x100000 0x200000>;
 166                         };
 167
 168                         partition@300000 {
 169                                 label = "hbmc.u-boot";
 170                                 reg = <0x300000 0x400000>;
 171                         };
 172
 173                         partition@700000 {
 174                                 label = "hbmc.env";
 175                                 reg = <0x700000 0x40000>;
 176                         };
 177
 178                         partition@800000 {
 179                                 label = "hbmc.rootfs";
 180                                 reg = <0x800000 0x3800000>;
 181                         };
 182                 };
 183         };
 184 };
 185
 186 &mailbox0_cluster0 {
 187         status = "okay";
 188         interrupts = <436>;
 189
 190         mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
 191                 ti,mbox-rx = <0 0 0>;
 192                 ti,mbox-tx = <1 0 0>;
 193         };
 194
 195         mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
 196                 ti,mbox-rx = <2 0 0>;
 197                 ti,mbox-tx = <3 0 0>;
 198         };
 199 };
 200
 201 &mailbox0_cluster1 {
 202         status = "okay";
 203         interrupts = <432>;
 204
 205         mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
 206                 ti,mbox-rx = <0 0 0>;
 207                 ti,mbox-tx = <1 0 0>;
 208         };
 209
 210         mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
 211                 ti,mbox-rx = <2 0 0>;
 212                 ti,mbox-tx = <3 0 0>;
 213         };
 214 };
 215
 216 &mcu_r5fss0_core0 {
 217         mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
 218         memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
 219                         <&mcu_r5fss0_core0_memory_region>;
 220 };
 221
 222 &mcu_r5fss0_core1 {
 223         mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
 224         memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
 225                         <&mcu_r5fss0_core1_memory_region>;
 226 };
 227
 228 &main_r5fss0_core0 {
 229         mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
 230         memory-region = <&main_r5fss0_core0_dma_memory_region>,
 231                         <&main_r5fss0_core0_memory_region>;
 232 };
 233
 234 &main_r5fss0_core1 {
 235         mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
 236         memory-region = <&main_r5fss0_core1_dma_memory_region>,
 237                         <&main_r5fss0_core1_memory_region>;
 238 };
 239
 240 &main_i2c0 {
 241         pinctrl-names = "default";
 242         pinctrl-0 = <&main_i2c0_pins_default>;
 243         clock-frequency = <400000>;
 244
 245         exp_som: gpio@21 {
 246                 compatible = "ti,tca6408";
 247                 reg = <0x21>;
 248                 gpio-controller;
 249                 #gpio-cells = <2>;
 250                 gpio-line-names = "USB2.0_MUX_SEL", "CANUART_MUX1_SEL0",
 251                                   "CANUART_MUX2_SEL0", "CANUART_MUX_SEL1",
 252                                   "UART/LIN_MUX_SEL", "TRC_D17/AUDIO_REFCLK_SEL",
 253                                   "GPIO_LIN_EN", "CAN_STB";
 254         };
 255 };
 256
 257 &wkup_i2c0 {
 258         status = "okay";
 259         pinctrl-names = "default";
 260         pinctrl-0 = <&wkup_i2c0_pins_default>;
 261         clock-frequency = <400000>;
 262
 263         eeprom@50 {
 264                 compatible = "atmel,24c256";
 265                 reg = <0x50>;
 266         };
 267 };
 268
 269 &ospi0 {
 270         status = "okay";
 271         pinctrl-names = "default";
 272         pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
 273
 274         flash@0 {
 275                 compatible = "jedec,spi-nor";
 276                 reg = <0x0>;
 277                 spi-tx-bus-width = <8>;
 278                 spi-rx-bus-width = <8>;
 279                 spi-max-frequency = <25000000>;
 280                 cdns,tshsl-ns = <60>;
 281                 cdns,tsd2d-ns = <60>;
 282                 cdns,tchsh-ns = <60>;
 283                 cdns,tslch-ns = <60>;
 284                 cdns,read-delay = <4>;
 285
 286                 partitions {
 287                         compatible = "fixed-partitions";
 288                         #address-cells = <1>;
 289                         #size-cells = <1>;
 290
 291                         partition@0 {
 292                                 label = "ospi.tiboot3";
 293                                 reg = <0x0 0x100000>;
 294                         };
 295
 296                         partition@100000 {
 297                                 label = "ospi.tispl";
 298                                 reg = <0x100000 0x200000>;
 299                         };
 300
 301                         partition@300000 {
 302                                 label = "ospi.u-boot";
 303                                 reg = <0x300000 0x400000>;
 304                         };
 305
 306                         partition@700000 {
 307                                 label = "ospi.env";
 308                                 reg = <0x700000 0x40000>;
 309                         };
 310
 311                         partition@740000 {
 312                                 label = "ospi.env.backup";
 313                                 reg = <0x740000 0x40000>;
 314                         };
 315
 316                         partition@800000 {
 317                                 label = "ospi.rootfs";
 318                                 reg = <0x800000 0x37c0000>;
 319                         };
 320
 321                         partition@3fc0000 {
 322                                 label = "ospi.phypattern";
 323                                 reg = <0x3fc0000 0x40000>;
 324                         };
 325                 };
 326         };
 327 };