arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd.
   4  */
   5
   6 /dts-v1/;
   7 #include "rk3588j.dtsi"
   8 #include "rk3588-edgeble-neu6b.dtsi"
   9
  10 / {
  11         model = "Edgeble Neu6B IO Board";
  12         compatible = "edgeble,neural-compute-module-6b-io",
  13                      "edgeble,neural-compute-module-6b", "rockchip,rk3588";
  14
  15         aliases {
  16                 serial2 = &uart2;
  17         };
  18
  19         chosen {
  20                 stdout-path = "serial2:1500000n8";
  21         };
  22 };
  23
  24 &combphy0_ps {
  25         status = "okay";
  26 };
  27
  28 &i2c6 {
  29         status = "okay";
  30
  31         hym8563: rtc@51 {
  32                 compatible = "haoyu,hym8563";
  33                 reg = <0x51>;
  34                 interrupt-parent = <&gpio0>;
  35                 interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
  36                 #clock-cells = <0>;
  37                 clock-output-names = "hym8563";
  38                 pinctrl-names = "default";
  39                 pinctrl-0 = <&hym8563_int>;
  40                 wakeup-source;
  41         };
  42 };
  43
  44 &pinctrl {
  45         hym8563 {
  46                 hym8563_int: hym8563-int {
  47                         rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
  48                 };
  49         };
  50 };
  51
  52 /* FAN */
  53 &pwm2 {
  54         pinctrl-0 = <&pwm2m1_pins>;
  55         pinctrl-names = "default";
  56         status = "okay";
  57 };
  58
  59 &sata0 {
  60         status = "okay";
  61 };
  62
  63 &sdmmc {
  64         bus-width = <4>;
  65         cap-mmc-highspeed;
  66         cap-sd-highspeed;
  67         disable-wp;
  68         no-sdio;
  69         no-mmc;
  70         sd-uhs-sdr104;
  71         vmmc-supply = <&vcc_3v3_s3>;
  72         vqmmc-supply = <&vccio_sd_s0>;
  73         status = "okay";
  74 };
  75
  76 &uart2 {
  77         pinctrl-0 = <&uart2m0_xfer>;
  78         status = "okay";
  79 };
  80
  81 /* RS232 */
  82 &uart6 {
  83         pinctrl-0 = <&uart6m0_xfer>;
  84         pinctrl-names = "default";
  85         status = "okay";
  86 };
  87
  88 /* RS485 */
  89 &uart7 {
  90         pinctrl-0 = <&uart7m2_xfer>;
  91         pinctrl-names = "default";
  92         status = "okay";
  93 };