arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2
   3 /dts-v1/;
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/pinctrl/rockchip.h>
   7 #include <dt-bindings/soc/rockchip,vop2.h>
   8 #include "rk3566.dtsi"
   9
  10 / {
  11         model = "Pine64 RK3566 Quartz64-B Board";
  12         compatible = "pine64,quartz64-b", "rockchip,rk3566";
  13
  14         aliases {
  15                 ethernet0 = &gmac1;
  16                 mmc0 = &sdmmc0;
  17                 mmc1 = &sdhci;
  18                 mmc2 = &sdmmc1;
  19         };
  20
  21         chosen: chosen {
  22                 stdout-path = "serial2:1500000n8";
  23         };
  24
  25         gmac1_clkin: external-gmac1-clock {
  26                 compatible = "fixed-clock";
  27                 clock-frequency = <125000000>;
  28                 clock-output-names = "gmac1_clkin";
  29                 #clock-cells = <0>;
  30         };
  31
  32         hdmi-con {
  33                 compatible = "hdmi-connector";
  34                 type = "a";
  35
  36                 port {
  37                         hdmi_con_in: endpoint {
  38                                 remote-endpoint = <&hdmi_out_con>;
  39                         };
  40                 };
  41         };
  42
  43         leds {
  44                 compatible = "gpio-leds";
  45
  46                 led-user {
  47                         label = "user-led";
  48                         default-state = "on";
  49                         gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
  50                         linux,default-trigger = "heartbeat";
  51                         pinctrl-names = "default";
  52                         pinctrl-0 = <&user_led_enable_h>;
  53                         retain-state-suspended;
  54                 };
  55         };
  56
  57         sound {
  58                 compatible = "simple-audio-card";
  59                 simple-audio-card,format = "i2s";
  60                 simple-audio-card,name = "Analog RK809";
  61                 simple-audio-card,mclk-fs = <256>;
  62
  63                 simple-audio-card,cpu {
  64                         sound-dai = <&i2s1_8ch>;
  65                 };
  66
  67                 simple-audio-card,codec {
  68                         sound-dai = <&rk809>;
  69                 };
  70         };
  71
  72         sdio_pwrseq: sdio-pwrseq {
  73                 status = "okay";
  74                 compatible = "mmc-pwrseq-simple";
  75                 clocks = <&rk809 1>;
  76                 clock-names = "ext_clock";
  77                 pinctrl-names = "default";
  78                 pinctrl-0 = <&wifi_enable_h>;
  79                 reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
  80                 post-power-on-delay-ms = <100>;
  81                 power-off-delay-us = <5000000>;
  82         };
  83
  84         vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
  85                 compatible = "regulator-fixed";
  86                 enable-active-high;
  87                 gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
  88                 pinctrl-names = "default";
  89                 pinctrl-0 = <&pcie_enable_h>;
  90                 regulator-name = "vcc3v3_pcie_p";
  91                 regulator-min-microvolt = <3300000>;
  92                 regulator-max-microvolt = <3300000>;
  93                 vin-supply = <&vcc_3v3>;
  94         };
  95
  96         vcc5v0_in: vcc5v0-in-regulator {
  97                 compatible = "regulator-fixed";
  98                 regulator-name = "vcc5v0_in";
  99                 regulator-always-on;
 100                 regulator-boot-on;
 101                 regulator-min-microvolt = <5000000>;
 102                 regulator-max-microvolt = <5000000>;
 103         };
 104
 105         vcc5v0_sys: vcc5v0-sys-regulator {
 106                 compatible = "regulator-fixed";
 107                 regulator-name = "vcc5v0_sys";
 108                 regulator-always-on;
 109                 regulator-boot-on;
 110                 regulator-min-microvolt = <5000000>;
 111                 regulator-max-microvolt = <5000000>;
 112                 vin-supply = <&vcc5v0_in>;
 113         };
 114
 115         vcc3v3_sys: vcc3v3-sys-regulator {
 116                 compatible = "regulator-fixed";
 117                 regulator-name = "vcc3v3_sys";
 118                 regulator-min-microvolt = <3300000>;
 119                 regulator-max-microvolt = <3300000>;
 120                 regulator-always-on;
 121                 vin-supply = <&vcc5v0_sys>;
 122         };
 123
 124         vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
 125                 compatible = "regulator-fixed";
 126                 regulator-name = "vcc5v0_usb30_host";
 127                 enable-active-high;
 128                 gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
 129                 pinctrl-names = "default";
 130                 pinctrl-0 = <&vcc5v0_usb30_host_en_h>;
 131                 regulator-always-on;
 132                 regulator-min-microvolt = <5000000>;
 133                 regulator-max-microvolt = <5000000>;
 134                 vin-supply = <&vcc5v0_sys>;
 135         };
 136
 137         vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
 138                 compatible = "regulator-fixed";
 139                 regulator-name = "vcc5v0_usb_otg";
 140                 enable-active-high;
 141                 gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
 142                 pinctrl-names = "default";
 143                 pinctrl-0 = <&vcc5v0_usb_otg_en_h>;
 144                 regulator-always-on;
 145                 regulator-min-microvolt = <5000000>;
 146                 regulator-max-microvolt = <5000000>;
 147                 vin-supply = <&vcc5v0_sys>;
 148         };
 149 };
 150
 151 &combphy1 {
 152         status = "okay";
 153 };
 154
 155 &combphy2 {
 156         status = "okay";
 157 };
 158
 159 &cpu0 {
 160         cpu-supply = <&vdd_cpu>;
 161 };
 162
 163 &cpu1 {
 164         cpu-supply = <&vdd_cpu>;
 165 };
 166
 167 &cpu2 {
 168         cpu-supply = <&vdd_cpu>;
 169 };
 170
 171 &cpu3 {
 172         cpu-supply = <&vdd_cpu>;
 173 };
 174
 175 &gmac1 {
 176         assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
 177         assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
 178         clock_in_out = "input";
 179         phy-mode = "rgmii";
 180         phy-supply = <&vcc_3v3>;
 181         pinctrl-names = "default";
 182         pinctrl-0 = <&gmac1m1_miim
 183                      &gmac1m1_tx_bus2
 184                      &gmac1m1_rx_bus2
 185                      &gmac1m1_rgmii_clk
 186                      &gmac1m1_clkinout
 187                      &gmac1m1_rgmii_bus>;
 188         snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
 189         snps,reset-active-low;
 190         /* Reset time is 20ms, 100ms for rtl8211f, also works well here */
 191         snps,reset-delays-us = <0 20000 100000>;
 192         tx_delay = <0x4f>;
 193         rx_delay = <0x24>;
 194         phy-handle = <&rgmii_phy1>;
 195         status = "okay";
 196 };
 197
 198 &gpu {
 199         mali-supply = <&vdd_gpu>;
 200         status = "okay";
 201 };
 202
 203 &hdmi {
 204         avdd-0v9-supply = <&vdda0v9_image>;
 205         avdd-1v8-supply = <&vcca1v8_image>;
 206         status = "okay";
 207 };
 208
 209 &hdmi_in {
 210         hdmi_in_vp0: endpoint {
 211                 remote-endpoint = <&vp0_out_hdmi>;
 212         };
 213 };
 214
 215 &hdmi_out {
 216         hdmi_out_con: endpoint {
 217                 remote-endpoint = <&hdmi_con_in>;
 218         };
 219 };
 220
 221 &hdmi_sound {
 222         status = "okay";
 223 };
 224
 225 &i2c0 {
 226         status = "okay";
 227
 228         vdd_cpu: regulator@1c {
 229                 compatible = "tcs,tcs4525";
 230                 reg = <0x1c>;
 231                 fcs,suspend-voltage-selector = <1>;
 232                 regulator-name = "vdd_cpu";
 233                 regulator-min-microvolt = <800000>;
 234                 regulator-max-microvolt = <1150000>;
 235                 regulator-ramp-delay = <2300>;
 236                 regulator-always-on;
 237                 regulator-boot-on;
 238                 vin-supply = <&vcc5v0_sys>;
 239
 240                 regulator-state-mem {
 241                         regulator-off-in-suspend;
 242                 };
 243         };
 244
 245         rk809: pmic@20 {
 246                 compatible = "rockchip,rk809";
 247                 reg = <0x20>;
 248                 interrupt-parent = <&gpio0>;
 249                 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
 250                 assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
 251                 assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
 252                 clock-names = "mclk";
 253                 clocks = <&cru I2S1_MCLKOUT_TX>;
 254                 clock-output-names = "rk808-clkout1", "rk808-clkout2";
 255
 256                 pinctrl-names = "default";
 257                 pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
 258                 rockchip,system-power-controller;
 259                 #sound-dai-cells = <0>;
 260                 wakeup-source;
 261                 #clock-cells = <1>;
 262
 263                 vcc1-supply = <&vcc3v3_sys>;
 264                 vcc2-supply = <&vcc3v3_sys>;
 265                 vcc3-supply = <&vcc3v3_sys>;
 266                 vcc4-supply = <&vcc3v3_sys>;
 267                 vcc5-supply = <&vcc3v3_sys>;
 268                 vcc6-supply = <&vcc3v3_sys>;
 269                 vcc7-supply = <&vcc3v3_sys>;
 270                 vcc8-supply = <&vcc3v3_sys>;
 271                 vcc9-supply = <&vcc3v3_sys>;
 272
 273                 regulators {
 274                         vdd_log: DCDC_REG1 {
 275                                 regulator-name = "vdd_log";
 276                                 regulator-always-on;
 277                                 regulator-boot-on;
 278                                 regulator-min-microvolt = <500000>;
 279                                 regulator-max-microvolt = <1350000>;
 280                                 regulator-init-microvolt = <900000>;
 281                                 regulator-ramp-delay = <6001>;
 282
 283                                 regulator-state-mem {
 284                                         regulator-on-in-suspend;
 285                                         regulator-suspend-microvolt = <900000>;
 286                                 };
 287                         };
 288
 289                         vdd_gpu: DCDC_REG2 {
 290                                 regulator-name = "vdd_gpu";
 291                                 regulator-always-on;
 292                                 regulator-boot-on;
 293                                 regulator-min-microvolt = <900000>;
 294                                 regulator-max-microvolt = <1350000>;
 295                                 regulator-init-microvolt = <900000>;
 296                                 regulator-ramp-delay = <6001>;
 297
 298                                 regulator-state-mem {
 299                                         regulator-off-in-suspend;
 300                                         regulator-suspend-microvolt = <900000>;
 301                                 };
 302                         };
 303
 304                         vcc_ddr: DCDC_REG3 {
 305                                 regulator-name = "vcc_ddr";
 306                                 regulator-always-on;
 307                                 regulator-boot-on;
 308                                 regulator-initial-mode = <0x2>;
 309                                 regulator-state-mem {
 310                                         regulator-on-in-suspend;
 311                                 };
 312                         };
 313
 314                         vdd_npu: DCDC_REG4 {
 315                                 regulator-name = "vdd_npu";
 316                                 regulator-min-microvolt = <900000>;
 317                                 regulator-max-microvolt = <1350000>;
 318                                 regulator-initial-mode = <0x2>;
 319                                 regulator-state-mem {
 320                                         regulator-off-in-suspend;
 321                                 };
 322                         };
 323
 324                         vcc_1v8: DCDC_REG5 {
 325                                 regulator-name = "vcc_1v8";
 326                                 regulator-always-on;
 327                                 regulator-boot-on;
 328                                 regulator-min-microvolt = <1800000>;
 329                                 regulator-max-microvolt = <1800000>;
 330
 331                                 regulator-state-mem {
 332                                         regulator-on-in-suspend;
 333                                         regulator-suspend-microvolt = <1800000>;
 334                                 };
 335                         };
 336
 337                         vdda0v9_image: LDO_REG1 {
 338                                 regulator-name = "vdda0v9_image";
 339                                 regulator-always-on;
 340                                 regulator-boot-on;
 341                                 regulator-min-microvolt = <900000>;
 342                                 regulator-max-microvolt = <900000>;
 343
 344                                 regulator-state-mem {
 345                                         regulator-on-in-suspend;
 346                                         regulator-suspend-microvolt = <900000>;
 347                                 };
 348                         };
 349
 350                         vdda_0v9: LDO_REG2 {
 351                                 regulator-name = "vdda_0v9";
 352                                 regulator-always-on;
 353                                 regulator-boot-on;
 354                                 regulator-min-microvolt = <900000>;
 355                                 regulator-max-microvolt = <900000>;
 356
 357                                 regulator-state-mem {
 358                                         regulator-on-in-suspend;
 359                                         regulator-suspend-microvolt = <900000>;
 360                                 };
 361                         };
 362
 363                         vdda0v9_pmu: LDO_REG3 {
 364                                 regulator-name = "vdda0v9_pmu";
 365                                 regulator-always-on;
 366                                 regulator-boot-on;
 367                                 regulator-min-microvolt = <900000>;
 368                                 regulator-max-microvolt = <900000>;
 369                                 regulator-state-mem {
 370                                         regulator-on-in-suspend;
 371                                         regulator-suspend-microvolt = <900000>;
 372                                 };
 373                         };
 374
 375                         vccio_acodec: LDO_REG4 {
 376                                 regulator-name = "vccio_acodec";
 377                                 regulator-always-on;
 378                                 regulator-boot-on;
 379                                 regulator-min-microvolt = <3300000>;
 380                                 regulator-max-microvolt = <3300000>;
 381
 382                                 regulator-state-mem {
 383                                         regulator-on-in-suspend;
 384                                         regulator-suspend-microvolt = <3300000>;
 385
 386                                 };
 387                         };
 388
 389                         vccio_sd: LDO_REG5 {
 390                                 regulator-name = "vccio_sd";
 391                                 regulator-always-on;
 392                                 regulator-boot-on;
 393                                 regulator-min-microvolt = <1800000>;
 394                                 regulator-max-microvolt = <3300000>;
 395
 396                                 regulator-state-mem {
 397                                         regulator-on-in-suspend;
 398                                         regulator-suspend-microvolt = <3300000>;
 399                                 };
 400                         };
 401
 402                         vcc3v3_pmu: LDO_REG6 {
 403                                 regulator-name = "vcc3v3_pmu";
 404                                 regulator-always-on;
 405                                 regulator-boot-on;
 406                                 regulator-min-microvolt = <3300000>;
 407                                 regulator-max-microvolt = <3300000>;
 408
 409                                 regulator-state-mem {
 410                                         regulator-on-in-suspend;
 411                                         regulator-suspend-microvolt = <3300000>;
 412                                 };
 413                         };
 414
 415                         vcca_1v8: LDO_REG7 {
 416                                 regulator-name = "vcca_1v8";
 417                                 regulator-always-on;
 418                                 regulator-boot-on;
 419                                 regulator-min-microvolt = <1800000>;
 420                                 regulator-max-microvolt = <1800000>;
 421
 422                                 regulator-state-mem {
 423                                         regulator-on-in-suspend;
 424                                         regulator-suspend-microvolt = <1800000>;
 425                                 };
 426                         };
 427
 428                         vcca1v8_pmu: LDO_REG8 {
 429                                 regulator-name = "vcca1v8_pmu";
 430                                 regulator-always-on;
 431                                 regulator-boot-on;
 432                                 regulator-min-microvolt = <1800000>;
 433                                 regulator-max-microvolt = <1800000>;
 434
 435                                 regulator-state-mem {
 436                                         regulator-on-in-suspend;
 437                                         regulator-suspend-microvolt = <1800000>;
 438                                 };
 439                         };
 440
 441                         vcca1v8_image: LDO_REG9 {
 442                                 regulator-name = "vcca1v8_image";
 443                                 regulator-always-on;
 444                                 regulator-boot-on;
 445                                 regulator-min-microvolt = <1800000>;
 446                                 regulator-max-microvolt = <1800000>;
 447
 448                                 regulator-state-mem {
 449                                         regulator-on-in-suspend;
 450                                         regulator-suspend-microvolt = <1800000>;
 451                                 };
 452                         };
 453
 454                         vcc_3v3: SWITCH_REG1 {
 455                                 regulator-boot-on;
 456                                 regulator-name = "vcc_3v3";
 457                         };
 458
 459                         vcc3v3_sd: SWITCH_REG2 {
 460                                 regulator-name = "vcc3v3_sd";
 461                         };
 462                 };
 463         };
 464 };
 465
 466 /* i2c2_m1 exposed on csi port, pulled up to vcc_3v3 */
 467 &i2c2 {
 468         pinctrl-names = "default";
 469         pinctrl-0 = <&i2c2m1_xfer>;
 470         status = "okay";
 471 };
 472
 473 /* i2c3_m1 exposed on dsi port, pulled up to vcc_3v3 */
 474 &i2c3 {
 475         pinctrl-names = "default";
 476         pinctrl-0 = <&i2c3m1_xfer>;
 477         status = "okay";
 478 };
 479
 480 /*
 481  * i2c4_m0 is exposed on PI40, pulled up to vcc_3v3
 482  * pin 27 - i2c4_sda_m0
 483  * pin 28 - i2c4_scl_m0
 484  */
 485 &i2c4 {
 486         status = "okay";
 487 };
 488
 489 /*
 490  * i2c5_m0 is exposed on PI40
 491  * pin 29 - i2c5_scl_m0
 492  * pin 31 - i2c5_sda_m0
 493  */
 494 &i2c5 {
 495         status = "disabled";
 496 };
 497
 498 &i2s0_8ch {
 499         status = "okay";
 500 };
 501
 502 &i2s1_8ch {
 503         pinctrl-names = "default";
 504         pinctrl-0 = <&i2s1m0_sclktx
 505                      &i2s1m0_lrcktx
 506                      &i2s1m0_sdi0
 507                      &i2s1m0_sdo0>;
 508         rockchip,trcm-sync-tx-only;
 509         status = "okay";
 510 };
 511
 512 &mdio1 {
 513         rgmii_phy1: ethernet-phy@1 {
 514                 compatible = "ethernet-phy-ieee802.3-c22";
 515                 reg = <0x1>;
 516         };
 517 };
 518
 519 &pcie2x1 {
 520         pinctrl-names = "default";
 521         pinctrl-0 = <&pcie_reset_h>;
 522         reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
 523         vpcie3v3-supply = <&vcc3v3_pcie_p>;
 524         status = "okay";
 525 };
 526
 527 &pinctrl {
 528         bt {
 529                 bt_enable_h: bt-enable-h {
 530                         rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
 531                 };
 532
 533                 bt_host_wake_l: bt-host-wake-l {
 534                         rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
 535                 };
 536
 537                 bt_wake_l: bt-wake-l {
 538                         rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
 539                 };
 540         };
 541
 542         leds {
 543                 user_led_enable_h: user-led-enable-h {
 544                         rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
 545                 };
 546         };
 547
 548         pcie {
 549                 pcie_enable_h: pcie-enable-h {
 550                         rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 551                 };
 552
 553                 pcie_reset_h: pcie-reset-h {
 554                         rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 555                 };
 556         };
 557
 558         pmic {
 559                 pmic_int: pmic_int {
 560                         rockchip,pins =
 561                                 <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 562                 };
 563         };
 564
 565         sdio-pwrseq {
 566                 wifi_enable_h: wifi-enable-h {
 567                         rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
 568                 };
 569         };
 570
 571         usb {
 572                 vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h {
 573                         rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
 574                 };
 575
 576                 vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h {
 577                         rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
 578                 };
 579         };
 580 };
 581
 582 &pmu_io_domains {
 583         status = "okay";
 584         pmuio1-supply = <&vcc3v3_pmu>;
 585         pmuio2-supply = <&vcca1v8_pmu>;
 586         vccio1-supply = <&vccio_acodec>;
 587         vccio2-supply = <&vcc_1v8>;
 588         vccio3-supply = <&vccio_sd>;
 589         vccio4-supply = <&vcca1v8_pmu>;
 590         vccio5-supply = <&vcc_3v3>;
 591         vccio6-supply = <&vcc_3v3>;
 592         vccio7-supply = <&vcc_3v3>;
 593 };
 594
 595 &saradc {
 596         vref-supply = <&vcca_1v8>;
 597         status = "okay";
 598 };
 599
 600 &sdhci {
 601         bus-width = <8>;
 602         mmc-hs200-1_8v;
 603         non-removable;
 604         vmmc-supply = <&vcc_3v3>;
 605         vqmmc-supply = <&vcc_1v8>;
 606         status = "okay";
 607 };
 608
 609 &sdmmc0 {
 610         bus-width = <4>;
 611         cap-sd-highspeed;
 612         cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 613         disable-wp;
 614         pinctrl-names = "default";
 615         pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
 616         sd-uhs-sdr50;
 617         vmmc-supply = <&vcc3v3_sd>;
 618         vqmmc-supply = <&vccio_sd>;
 619         status = "okay";
 620 };
 621
 622 &sdmmc1 {
 623         bus-width = <4>;
 624         cap-sd-highspeed;
 625         cap-sdio-irq;
 626         keep-power-in-suspend;
 627         mmc-pwrseq = <&sdio_pwrseq>;
 628         non-removable;
 629         pinctrl-names = "default";
 630         pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
 631         vmmc-supply = <&vcc3v3_sys>;
 632         vqmmc-supply = <&vcca1v8_pmu>;
 633         status = "okay";
 634 };
 635
 636 &sfc {
 637         pinctrl-0 = <&fspi_pins>;
 638         pinctrl-names = "default";
 639         #address-cells = <1>;
 640         #size-cells = <0>;
 641         status = "okay";
 642
 643         flash@0 {
 644                 compatible = "jedec,spi-nor";
 645                 reg = <0>;
 646                 spi-max-frequency = <24000000>;
 647                 spi-rx-bus-width = <4>;
 648                 spi-tx-bus-width = <1>;
 649         };
 650 };
 651
 652 &tsadc {
 653         status = "okay";
 654 };
 655
 656 &uart1 {
 657         pinctrl-names = "default";
 658         pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
 659         status = "okay";
 660         uart-has-rtscts;
 661
 662         bluetooth {
 663                 compatible = "brcm,bcm4345c5";
 664                 clocks = <&rk809 1>;
 665                 clock-names = "lpo";
 666                 device-wakeup-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
 667                 host-wakeup-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
 668                 shutdown-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
 669                 pinctrl-names = "default";
 670                 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
 671                 vbat-supply = <&vcc3v3_sys>;
 672                 vddio-supply = <&vcca1v8_pmu>;
 673         };
 674 };
 675
 676 /*
 677  * uart2_m0 is exposed on PI40
 678  * pin 8  - uart2_tx_m0
 679  * pin 10 - uart2_rx_m0
 680  */
 681 &uart2 {
 682         status = "okay";
 683 };
 684
 685 &usb2phy0_host {
 686         phy-supply = <&vcc5v0_usb30_host>;
 687         status = "okay";
 688 };
 689
 690 &usb2phy0_otg {
 691         phy-supply = <&vcc5v0_usb_otg>;
 692         status = "okay";
 693 };
 694
 695 &usb2phy1_otg {
 696         phy-supply = <&vcc5v0_usb30_host>;
 697         status = "okay";
 698 };
 699
 700 &usb2phy0 {
 701         status = "okay";
 702 };
 703
 704 &usb2phy1 {
 705         status = "okay";
 706 };
 707
 708 &usb_host0_xhci {
 709         status = "okay";
 710 };
 711
 712 &usb_host1_xhci {
 713         status = "okay";
 714 };
 715
 716 &usb_host0_ehci {
 717         status = "okay";
 718 };
 719
 720 &usb_host0_ohci {
 721         status = "okay";
 722 };
 723
 724 &vop {
 725         assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
 726         assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
 727         status = "okay";
 728 };
 729
 730 &vop_mmu {
 731         status = "okay";
 732 };
 733
 734 &vp0 {
 735         vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
 736                 reg = <ROCKCHIP_VOP2_EP_HDMI0>;
 737                 remote-endpoint = <&hdmi_in_vp0>;
 738         };
 739 };